Arch Linux

AivarasK

Member

From: Lithuania

Registered: 2011-01-29

Posts: 13

Website

Wacom Bamboo Pad, custom kernel not working

Hello,
I have the latest archlinux with custom kernel (3.16.1-1-chromebook) for my Acer C720 laptop.
Wacom Bamboo pad (USB) is detectable via lsusb:

Bus 001 Device 091: ID 056a:0318 Wacom Co., Ltd

But it's not on  /proc/bus/input/devices

dmesg gives outputs like this:

[  941.060069] usb 1-5: USB disconnect, device number 92
[  941.368974] usb 1-5: new full-speed USB device number 93 using xhci_hcd
[  941.544515] usb 1-5: ep 0x81 - rounding interval to 16 microframes, ep desc says 24 microframes

lsmod shows wacom module as loaded:

lsmod | grep wacom
wacom                  63635  0
usbcore               199328  6 ath3k,btusb,wacom,uvcvideo,usbhid,xhci_hcd

xsetwacom --list devices gives no output.

Any ideas how to solve this?
Thanks!

---

Laptop I: DELL Inspiron 15: Intel i3-4005U @ 1.70GHz, 8GB DDR3 1600MHz, Sandisk Plus 256GB SSD + WD Blue 500GB, Archlinux x86_64.
Laptop II: Acer C720: Intel Celeron 2955U @ 1.4GHz, 2GB DDR3, Intel HD, 120GB m.2 SSD, Archlinux x86_64
Server: HP ProLiant G4 DL380: 2x Intel Xeon 3.6GHz, 8GB of EEC ram, 8x 73GB 15K RPM SCSI drives, Archlinux x86_64