Arch Linux

71GA

Member

From: Slovenia

Registered: 2012-09-15

Posts: 282

openocd & cmsis-dap

I am trying to use openocd with cmsis-dap interface for ARM debugging. But I get a problem because when I type command

openocd -c "interface cmsis-dap" -f /usr/local/share/openocd/scripts/target/lpc3141.cfg

I get an error saying that openocd 0.8.0 does not support this interface:

[ziga@Ziga-PC razhroscevanje]$ openocd -c "interface cmsis-dap" -f /usr/local/share/openocd/scripts/target/lpc3141.cfg
Open On-Chip Debugger 0.8.0 (2014-04-29-15:41)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
Error: The specified debug interface was not found (cmsis-dap)
The following debug interfaces are available:
1: parport
2: ftdi
3: usb_blaster
4: amt_jtagaccel
5: gw16012
6: presto
7: usbprog
8: jlink
9: vsllink
10: rlink
11: ulink
12: arm-jtag-ew
13: buspirate
14: remote_bitbang
15: hla
16: osbdm
17: opendous
18: aice
in procedure 'interface'

This is weird because it is clearly stated here that openocd should support this driver - look under "JTAG - Layer:". How can I make openocd work with cmsis-dap?

---

C, ARM, ARM assembly, HTML, CSS, JS, Linux