You are not logged in.
Pages: 1
Hello everybody,
I've become an Arch user since only a few months and this is the first time I
write on this forum, so forgive me for any mistake on the section I have to use.
I was not sure if I had to post this problem here or in the "Kernel & Hardware"
section, since it seems to be quite serious.
My problem is that, randomly at boot, Xorg and other services give an error
message regarding a timeout that has been reached and obviously this prevents
KDM from starting. I have tried to figure out what the problem is analyzing both
"dmesg" output and "Xorg.0.log".
The result is that I have found some error messages but I'm not able to figure
out which is the true cause of my problem.
The problems I have are related with:
Nouveau: My ASUS N550JV has an Nvidia Optimus configuration on a GeForce 750M
which creates many error messages, but those are the same whether the system boots
up correctly or it doesn't.
ELAN Touchscreen: My touchscreen keeps connecting and disconnecting about 20
times during boot and then it start working. This leads to various messages
regarding it. (It is always on port 10 of usb bus 1 or 3)
systemd-logind: In Xorg I get an error regarding this process.
I have tried to set the touchscreen as unauthorized through a udev rule but the
only result is that I have an infinite series of connections and disconnections
instead of only 20.
Here are my logs:
dmesg - correct boot:
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9bbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9bbc000-0x00000000b9bc2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9bc3000-0x00000000ba3fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba3fb000-0x00000000ba680fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba681000-0x00000000c98eafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98eb000-0x00000000c9af2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9af3000-0x00000000c9e25fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e26000-0x00000000cab25fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab26000-0x00000000caf59fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caf5a000-0x00000000caffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xc9eae000 ACPI=0xc9eae000 SMBIOS=0xcaf58418
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001053000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001053000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f53000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f53000-0x0000000037832000) (840MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037832000-0x0000000037c11000) (3MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037c11000-0x0000000084a72000) (1230MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000084a72000-0x00000000b67a0000) (797MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000b67a0000-0x00000000b9b9f000) (51MB)
[ 0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000b9b9f000-0x00000000b9bbc000) (0MB)
[ 0.000000] efi: mem13: type=10, attr=0xf, range=[0x00000000b9bbc000-0x00000000b9bc3000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000b9bc3000-0x00000000b9d17000) (1MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000b9d17000-0x00000000ba3bc000) (6MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ba3bc000-0x00000000ba3d8000) (0MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ba3d8000-0x00000000ba3f2000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ba3f2000-0x00000000ba3fb000) (0MB)
[ 0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x00000000ba3fb000-0x00000000ba681000) (2MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ba681000-0x00000000ba690000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ba690000-0x00000000c709a000) (202MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000c709a000-0x00000000c7342000) (2MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c7342000-0x00000000c7372000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000c7372000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c73a5000-0x00000000c73be000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000c73be000-0x00000000c8c8c000) (24MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c8c8c000-0x00000000c9624000) (9MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000c9624000-0x00000000c98eb000) (2MB)
[ 0.000000] efi: mem29: type=0, attr=0xf, range=[0x00000000c98eb000-0x00000000c9965000) (0MB)
[ 0.000000] efi: mem30: type=0, attr=0xf, range=[0x00000000c9965000-0x00000000c9af3000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c9af3000-0x00000000c9e1c000) (3MB)
[ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x00000000c9e1c000-0x00000000c9e26000) (0MB)
[ 0.000000] efi: mem33: type=10, attr=0xf, range=[0x00000000c9e26000-0x00000000caaee000) (12MB)
[ 0.000000] efi: mem34: type=10, attr=0xf, range=[0x00000000caaee000-0x00000000cab09000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000cab09000-0x00000000cab0d000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000cab0d000-0x00000000cab10000) (0MB)
[ 0.000000] efi: mem37: type=10, attr=0xf, range=[0x00000000cab10000-0x00000000cab26000) (0MB)
[ 0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x00000000cab26000-0x00000000cae83000) (3MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000cae83000-0x00000000caf5a000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000caf5a000-0x00000000caf7b000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000caf7b000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x000000042f200000) (13042MB)
[ 0.000000] efi: mem44: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. N550JV/N550JV, BIOS N550JV.208 11/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 042F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 042F400000 mask 7FFFC00000 uncachable
[ 0.000000] 9 base 042F200000 mask 7FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42f000000-0x42f1fffff]
[ 0.000000] [mem 0x42f000000-0x42f1fffff] page 2M
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42effffff]
[ 0.000000] [mem 0x42c000000-0x42effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb99fffff] page 2M
[ 0.000000] [mem 0xb9a00000-0xb9bbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] [mem 0xb9bc3000-0xb9bfffff] page 4k
[ 0.000000] [mem 0xb9c00000-0xba1fffff] page 2M
[ 0.000000] [mem 0xba200000-0xba3fafff] page 4k
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba681000-0xc98eafff]
[ 0.000000] [mem 0xba681000-0xba7fffff] page 4k
[ 0.000000] [mem 0xba800000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98eafff] page 4k
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] [mem 0xc9af3000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e25fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37832000-0x37c10fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9EAE000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9EAE090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EC1100 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9EAE248 012EB5 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB23080 000040
[ 0.000000] ACPI: APIC 0x00000000C9EC1210 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EC12A8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EC12F0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC13B8 00019D (v01 Intel zpodd 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1558 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1A98 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000C9EC2570 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9EC25B0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC25E8 000298 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC2880 0042F6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC6B78 001699 (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000C9EC8218 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: DMAR 0x00000000C9EC8250 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C9EC8308 0019E3 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AF1E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42f1fffff]
[ 0.000000] NODE_DATA [mem 0x42f1f5000-0x42f1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e800000-ffff88042e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] node 0: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] node 0: [mem 0xba681000-0xc98eafff]
[ 0.000000] node 0: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x42f1fffff]
[ 0.000000] On node 0 totalpages: 4164398
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12839 pages used for memmap
[ 0.000000] DMA32 zone: 821650 pages, LIFO batch:31
[ 0.000000] Normal zone: 52168 pages used for memmap
[ 0.000000] Normal zone: 3338752 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9bbc000-0xb9bc2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba3fb000-0xba680fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98eb000-0xc9af2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e26000-0xcab25fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab26000-0xcaf59fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf5a000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042ee00000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4099305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16272992K/16657592K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 384600K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.695 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.94 BogoMIPS (lpj=7982316)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140724
[ 0.014782] ACPI: All ACPI Tables successfully acquired
[ 0.017374] Security Framework initialized
[ 0.017379] Yama: becoming mindful.
[ 0.018076] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.020270] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021205] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.021217] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.021395] Initializing cgroup subsys memory
[ 0.021399] Initializing cgroup subsys devices
[ 0.021401] Initializing cgroup subsys freezer
[ 0.021402] Initializing cgroup subsys net_cls
[ 0.021404] Initializing cgroup subsys blkio
[ 0.021420] CPU: Physical Processor ID: 0
[ 0.021420] CPU: Processor Core ID: 0
[ 0.021423] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022200] mce: CPU supports 9 MCE banks
[ 0.022210] CPU0: Thermal monitoring enabled (TM1)
[ 0.022220] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.022294] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.023649] ftrace: allocating 20675 entries in 81 pages
[ 0.029965] dmar: Host address width 39
[ 0.029967] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.029973] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.029974] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.029978] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.029978] dmar: RMRR base: 0x000000c9a8a000 end: 0x000000c9a96fff
[ 0.029979] dmar: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.030045] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.030045] HPET id 0 under DRHD base 0xfed91000
[ 0.030046] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.030163] Enabled IRQ remapping in x2apic mode
[ 0.030163] Enabling x2apic
[ 0.030164] Enabled x2apic
[ 0.030169] Switched APIC routing to cluster x2apic.
[ 0.030563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063596] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.063602] TSC deadline timer enabled
[ 0.063619] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.063633] ... version: 3
[ 0.063634] ... bit width: 48
[ 0.063635] ... generic registers: 4
[ 0.063635] ... value mask: 0000ffffffffffff
[ 0.063636] ... max period: 0000ffffffffffff
[ 0.063637] ... fixed-purpose events: 3
[ 0.063637] ... event mask: 000000070000000f
[ 0.083734] x86: Booting SMP configuration:
[ 0.083736] .... node #0, CPUs: #1
[ 0.094859] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.097826] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.104507] #2
[ 0.115604] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.125265] #3
[ 0.136363] CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.146023] #4 #5 #6 #7
[ 0.221935] x86: Booted up 1 node, 8 CPUs
[ 0.221938] smpboot: Total of 8 processors activated (38330.58 BogoMIPS)
[ 0.227804] devtmpfs: initialized
[ 0.229810] PM: Registering ACPI NVS region [mem 0xb9bbc000-0xb9bc2fff] (28672 bytes)
[ 0.229812] PM: Registering ACPI NVS region [mem 0xc9e26000-0xcab25fff] (13631488 bytes)
[ 0.230475] pinctrl core: initialized pinctrl subsystem
[ 0.230507] RTC time: 19:54:52, date: 11/04/14
[ 0.230569] NET: Registered protocol family 16
[ 0.230644] cpuidle: using governor ladder
[ 0.230646] cpuidle: using governor menu
[ 0.230666] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.230667] ACPI: bus type PCI registered
[ 0.230668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.230718] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.230719] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.230778] PCI: Using configuration type 1 for base access
[ 0.244674] ACPI: Added _OSI(Module Device)
[ 0.244676] ACPI: Added _OSI(Processor Device)
[ 0.244677] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.244678] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.246723] ACPI : EC: EC description table is found, configuring boot EC
[ 0.248536] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.334600] ACPI: Dynamic OEM Table Load:
[ 0.334606] ACPI: SSDT 0xFFFF8804180FB800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.348067] ACPI: Dynamic OEM Table Load:
[ 0.348072] ACPI: SSDT 0xFFFF880418179000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.361297] ACPI: Dynamic OEM Table Load:
[ 0.361301] ACPI: SSDT 0xFFFF880418146000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.375728] ACPI: Interpreter enabled
[ 0.375735] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.375740] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.375753] ACPI: (supports S0 S3 S4 S5)
[ 0.375754] ACPI: Using IOAPIC for interrupt routing
[ 0.375770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.394125] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.394128] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.394139] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.394141] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.394992] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.394995] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.395340] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.395683] PCI host bridge to bus 0000:00
[ 0.395685] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.395687] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.395688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.395689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.395690] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.395691] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.395692] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.395693] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.395694] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.395695] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.395695] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.395696] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.395697] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.395703] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.395762] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.395788] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.395822] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.395851] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.395858] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.395863] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.395866] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.395919] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.395925] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.396003] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.396019] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.396072] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.396098] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.396124] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.396141] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[ 0.396197] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.396257] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.396275] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.396354] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.396391] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.396419] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.396433] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.396494] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.396522] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.396546] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.396605] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.396635] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.396660] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.396719] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.396770] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.396829] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.396859] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.396883] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.396942] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.396971] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.397004] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.397022] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.397101] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.397138] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.397167] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.397304] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.397317] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.397324] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.397330] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.397337] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.397343] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.397349] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.397382] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.397428] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.397440] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.397458] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.397546] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
[ 0.397553] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.397559] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.397566] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.397570] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.397575] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.397610] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.401292] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.401294] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.401297] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.401300] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.401365] acpiphp: Slot [1] registered
[ 0.401370] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.401445] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.401529] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[ 0.401555] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.401608] pci 0000:04:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.401677] pci 0000:04:00.0: supports D1 D2
[ 0.401678] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.401705] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.407973] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.407979] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.408064] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.408083] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.408112] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.408130] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.408223] pci 0000:05:00.0: supports D1 D2
[ 0.408224] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408257] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.414653] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.414656] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.414660] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.414665] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.414691] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.415376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.415417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415531] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415568] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415605] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415643] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415672] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.415675] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.415871] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.415938] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.416020] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.416022] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.416025] vgaarb: loaded
[ 0.416026] vgaarb: bridge control possible 0000:00:02.0
[ 0.416090] PCI: Using ACPI for IRQ routing
[ 0.417339] PCI: pci_cache_line_size set to 64 bytes
[ 0.417394] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.417395] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.417395] e820: reserve RAM buffer [mem 0xb9bbc000-0xbbffffff]
[ 0.417396] e820: reserve RAM buffer [mem 0xba3fb000-0xbbffffff]
[ 0.417397] e820: reserve RAM buffer [mem 0xc98eb000-0xcbffffff]
[ 0.417398] e820: reserve RAM buffer [mem 0xc9e26000-0xcbffffff]
[ 0.417399] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.417400] e820: reserve RAM buffer [mem 0x42f200000-0x42fffffff]
[ 0.417465] NetLabel: Initializing
[ 0.417466] NetLabel: domain hash size = 128
[ 0.417467] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.417474] NetLabel: unlabeled traffic allowed by default
[ 0.417493] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.417496] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.419526] Switched to clocksource hpet
[ 0.422883] pnp: PnP ACPI init
[ 0.422937] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.422939] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.423093] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.423094] system 00:01: [io 0xffff] has been reserved
[ 0.423095] system 00:01: [io 0xffff] has been reserved
[ 0.423096] system 00:01: [io 0xffff] has been reserved
[ 0.423097] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.423099] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.423100] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.423101] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.423102] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.423103] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.423105] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423123] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.423154] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.423155] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.423184] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.423186] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423206] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.423207] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423243] pnp 00:06: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.423267] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.423500] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.423501] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.423502] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.423503] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.423505] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.423506] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.423507] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.423508] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.423510] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.423511] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.423512] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.423513] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.423515] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423558] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423655] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.423658] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.423737] pnp: PnP ACPI: found 10 devices
[ 0.429555] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.429557] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.429559] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.429572] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.429573] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.429574] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.429578] pci 0000:00:1c.1: BAR 14: assigned [mem 0xcfe00000-0xcfffffff]
[ 0.429584] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429585] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.429587] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.429588] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.429591] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.429592] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.429595] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.429604] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.429606] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.429610] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfffffff]
[ 0.429614] pci 0000:00:1c.1: bridge window [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429618] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.429622] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.429629] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.429631] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.429635] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.429639] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.429644] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.429645] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.429646] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.429647] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.429648] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.429649] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.429650] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.429651] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.429652] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.429653] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.429654] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.429655] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff]
[ 0.429656] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.429657] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.429659] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.429660] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.429661] pci_bus 0000:03: resource 1 [mem 0xcfe00000-0xcfffffff]
[ 0.429662] pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429663] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.429664] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.429665] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.429666] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.429683] NET: Registered protocol family 2
[ 0.429836] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.429977] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.430077] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.430088] TCP: reno registered
[ 0.430101] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.430138] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.430194] NET: Registered protocol family 1
[ 0.430204] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.430531] PCI: CLS 64 bytes, default 64
[ 0.430562] Unpacking initramfs...
[ 0.469892] Freeing initrd memory: 3964K (ffff880037832000 - ffff880037c11000)
[ 0.469905] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.469907] software IO TLB [mem 0xc309a000-0xc709a000] (64MB) mapped at [ffff8800c309a000-ffff8800c7099fff]
[ 0.470107] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.470140] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470145] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470152] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470157] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470163] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470168] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470173] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470178] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470208] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.470225] Scanning for low memory corruption every 60 seconds
[ 0.470411] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.470425] Initialise system trusted keyring
[ 0.470652] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.471462] zpool: loaded
[ 0.471463] zbud: loaded
[ 0.471577] VFS: Disk quotas dquot_6.5.2
[ 0.471598] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.471674] msgmni has been set to 31868
[ 0.471710] Key type big_key registered
[ 0.471832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.471874] io scheduler noop registered
[ 0.471875] io scheduler deadline registered
[ 0.471892] io scheduler cfq registered (default)
[ 0.471993] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.472084] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.472180] pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X
[ 0.472279] pcieport 0000:00:1c.2: irq 29 for MSI/MSI-X
[ 0.472374] pcieport 0000:00:1c.3: irq 30 for MSI/MSI-X
[ 0.472437] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.472438] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.472439] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.472451] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.472454] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.472465] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.472468] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.472479] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.472480] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.472483] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.472494] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.472495] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.472498] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.472508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.472537] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.472563] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.472565] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.472587] efifb: probing for efifb
[ 0.472602] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 0.472603] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.472603] efifb: scrolling: redraw
[ 0.472604] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.475552] Console: switching to colour frame buffer device 240x67
[ 0.478798] fb0: EFI VGA frame buffer device
[ 0.478804] intel_idle: MWAIT substates: 0x42120
[ 0.478805] intel_idle: v0.4 model 0x3C
[ 0.478805] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.479023] GHES: HEST is not enabled!
[ 0.479072] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.479377] Linux agpgart interface v0.103
[ 0.479427] rtc_cmos 00:02: RTC can wake from S4
[ 0.479529] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.479555] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.479563] Intel P-state driver initializing.
[ 0.479725] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.479981] TCP: cubic registered
[ 0.480204] NET: Registered protocol family 10
[ 0.480721] NET: Registered protocol family 17
[ 0.481506] Loading compiled-in X.509 certificates
[ 0.481536] registered taskstats version 1
[ 0.482885] Magic number: 6:238:950
[ 0.482926] tty tty7: hash matches
[ 0.482995] cpu cpu5: hash matches
[ 0.483018] memory memory3: hash matches
[ 0.483093] rtc_cmos 00:02: setting system clock to 2014-11-04 19:54:52 UTC (1415130892)
[ 0.483290] PM: Hibernation image not present or could not be loaded.
[ 0.485249] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.485252] Write protecting the kernel read-only data: 8192k
[ 0.489838] Freeing unused kernel memory: 752K (ffff880002544000 - ffff880002600000)
[ 0.491668] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
[ 0.504803] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.507092] systemd-udevd[77]: starting version 216
[ 0.524055] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.527632] i8042: Detected active multiplexing controller, rev 1.1
[ 0.529011] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.529023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.529025] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.529027] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.529028] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.530334] ACPI: bus type USB registered
[ 0.530352] usbcore: registered new interface driver usbfs
[ 0.530360] usbcore: registered new interface driver hub
[ 0.530397] usbcore: registered new device driver usb
[ 0.530948] SCSI subsystem initialized
[ 0.530969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531185] ehci-pci: EHCI PCI platform driver
[ 0.531330] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.531336] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.531347] ehci-pci 0000:00:1a.0: debug port 2
[ 0.531967] libata version 3.00 loaded.
[ 0.535264] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.535282] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 0.542977] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.543147] hub 1-0:1.0: USB hub found
[ 0.543153] hub 1-0:1.0: 2 ports detected
[ 0.543377] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.543382] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.543393] ehci-pci 0000:00:1d.0: debug port 2
[ 0.547295] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.547305] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.556323] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.556509] hub 2-0:1.0: USB hub found
[ 0.556514] hub 2-0:1.0: 2 ports detected
[ 0.556739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.556747] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.556840] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.556860] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.557073] hub 3-0:1.0: USB hub found
[ 0.557091] hub 3-0:1.0: 14 ports detected
[ 0.559496] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.559498] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.559706] hub 4-0:1.0: USB hub found
[ 0.559716] hub 4-0:1.0: 4 ports detected
[ 0.560402] ahci 0000:00:1f.2: version 3.0
[ 0.560543] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.560575] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[ 0.560577] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.566854] scsi host0: ahci
[ 0.567019] scsi host1: ahci
[ 0.567141] scsi host2: ahci
[ 0.567252] scsi host3: ahci
[ 0.567341] scsi host4: ahci
[ 0.567374] ata1: DUMMY
[ 0.567375] ata2: DUMMY
[ 0.567378] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 32
[ 0.567379] ata4: DUMMY
[ 0.567381] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 32
[ 0.583513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.849986] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.886643] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.886662] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.888182] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C2 S, 1.00, max UDMA/133
[ 0.889544] ata3.00: configured for UDMA/133
[ 0.890893] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 S 1.00 PQ: 0 ANSI: 5
[ 0.893237] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.893255] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.893257] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.899594] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
[ 0.899597] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.906204] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.906208] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.906210] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.912602] ata5.00: configured for UDMA/133
[ 0.912727] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 0.925609] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.925611] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.925730] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.925834] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.925837] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 0.925856] sd 4:0:0:0: [sda] Write Protect is off
[ 0.925858] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925869] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.973953] hub 1-1:1.0: USB hub found
[ 0.974048] hub 1-1:1.0: 6 ports detected
[ 0.984057] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 0.984721] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.080102] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.204162] hub 2-1:1.0: USB hub found
[ 1.204272] hub 2-1:1.0: 8 ports detected
[ 1.363749] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.473732] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[ 1.541050] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.544660] usbcore: registered new interface driver usbhid
[ 1.544662] usbhid: USB HID core driver
[ 1.545882] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 1.598252] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[ 1.598295] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-3:1
[ 1.697277] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 2.030900] usb 3-7: new high-speed USB device number 4 using xhci_hcd
[ 2.106192] random: nonblocking pool is initialized
[ 2.142430] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.467952] usb 3-8: new high-speed USB device number 5 using xhci_hcd
[ 2.474803] Switched to clocksource tsc
[ 2.801571] usb 3-10: new full-speed USB device number 6 using xhci_hcd
[ 2.976444] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.590179] systemd-readahead[174]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.909080] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 5.079193] usb 3-10: USB disconnect, device number 6
[ 5.364273] vboxdrv: Found 8 processor cores.
[ 5.364722] vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x8e8f
[ 5.364769] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.364770] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 5.386896] usb 3-10: new full-speed USB device number 7 using xhci_hcd
[ 5.485195] systemd-udevd[207]: starting version 216
[ 5.562316] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.696307] vboxpci: IOMMU not found (not registered)
[ 7.665644] usb 3-10: USB disconnect, device number 7
[ 7.975717] usb 3-10: new full-speed USB device number 8 using xhci_hcd
[ 8.150721] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.524128] wmi: Mapper loaded
[ 8.880804] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 8.882110] ACPI: Lid Switch [LID]
[ 8.882160] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 8.882163] ACPI: Sleep Button [SLPB]
[ 8.882302] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 8.882304] ACPI: Power Button [PWRF]
[ 8.925656] ACPI: AC Adapter [AC0] (off-line)
[ 8.945894] ACPI: Battery Slot [BAT0] (battery present)
[ 9.120666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.121374] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.121376] ACPI: Thermal Zone [THRM] (49 C)
[ 9.279861] EDAC MC: Ver: 3.0.0
[ 9.311386] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
[ 9.339936] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 9.514276] EDAC ie31200: No ECC support
[ 9.527077] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140724/utaddress-258)
[ 9.527083] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 9.527086] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.571525] mei_me 0000:00:16.0: irq 33 for MSI/MSI-X
[ 9.977435] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.977442] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.984309] r8169 0000:05:00.0: irq 34 for MSI/MSI-X
[ 9.984487] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc900018d8000, ac:22:0b:02:e5:73, XID 0c000800 IRQ 34
[ 9.984489] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.233442] iTCO_vendor_support: vendor-support=0
[ 10.254345] usb 3-10: USB disconnect, device number 8
[ 10.304926] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 10.328363] systemd-udevd[241]: renamed network interface eth0 to enp5s0
[ 10.328555] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.328584] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 10.328676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.501711] cfg80211: Calling CRDA to update world regulatory domain
[ 10.536029] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 10.551690] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 10.564444] usb 3-10: new full-speed USB device number 9 using xhci_hcd
[ 10.627348] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 10.739506] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 10.842138] asus_wmi: ASUS WMI generic driver loaded
[ 10.842217] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'alsa/n550-bass'
[ 10.861070] AVX2 version of gcm_enc/dec engaged.
[ 10.888780] mousedev: PS/2 mouse device common for all mice
[ 11.001716] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 11.012548] sound hdaudioC1D0: autoconfig: line_outs=2 (0x14/0x1a/0x0/0x0/0x0) type:speaker
[ 11.012550] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.012551] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.012552] sound hdaudioC1D0: mono: mono_out=0x0
[ 11.012553] sound hdaudioC1D0: inputs:
[ 11.012554] sound hdaudioC1D0: Mic=0x1b
[ 11.012556] sound hdaudioC1D0: Internal Mic=0x12
[ 11.019145] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 11.019195] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 11.453185] [drm] Initialized drm 1.1.0 20060810
[ 11.463616] asus_wmi: Initialization: 0x1
[ 11.463642] asus_wmi: BIOS WMI version: 7.9
[ 11.463673] asus_wmi: SFUN value: 0x6a0877
[ 11.464347] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 11.471973] asus_wmi: Backlight controlled by ACPI video driver
[ 11.645480] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.0008/input/input17
[ 11.645667] hid-multitouch 0003:04F3:010C.0008: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 11.736055] [drm] Memory usable by graphics device = 2048M
[ 11.736057] [drm] Replacing VGA console driver
[ 11.736059] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 11.736060] fb: switching to inteldrmfb from EFI VGA
[ 11.736083] Console: switching to colour dummy device 80x25
[ 11.755427] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 11.755436] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.755437] [drm] Driver supports precise vblank timestamp query.
[ 11.755455] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.792893] [drm] VBT doesn't support DRRS
[ 11.922147] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 11.936510] fbcon: inteldrmfb (fb0) is primary device
[ 11.982666] Bluetooth: Core ver 2.19
[ 11.982675] NET: Registered protocol family 31
[ 11.982675] Bluetooth: HCI device and connection manager initialized
[ 11.982679] Bluetooth: HCI socket layer initialized
[ 11.982680] Bluetooth: L2CAP socket layer initialized
[ 11.982683] Bluetooth: SCO socket layer initialized
[ 12.006298] usbcore: registered new interface driver rtsx_usb
[ 12.040642] ath: phy0: Set parameters for CUS198
[ 12.040642] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.046590] ath: phy0: Enable LNA combining
[ 12.047749] ath: EEPROM regdomain: 0x60
[ 12.047750] ath: EEPROM indicates we should expect a direct regpair map
[ 12.047750] ath: Country alpha2 being used: 00
[ 12.047751] ath: Regpair used: 0x60
[ 12.049373] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.049594] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005d00000, irq=18
[ 12.145834] usbcore: registered new interface driver btusb
[ 12.155846] MXM: GUID detected in BIOS
[ 12.155922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 12.155973] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 12.156192] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 12.156193] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 12.598418] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[ 12.620359] media: Linux media interface: v0.10
[ 12.626127] systemd-udevd[232]: renamed network interface wlan0 to wlp4s0
[ 12.699457] Linux video capture interface: v2.00
[ 12.843252] usb 3-10: USB disconnect, device number 9
[ 13.003038] Console: switching to colour frame buffer device 240x67
[ 13.006511] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.006513] i915 0000:00:02.0: registered panic notifier
[ 13.015741] intel_rapl: Found RAPL domain package
[ 13.015746] intel_rapl: Found RAPL domain core
[ 13.015748] intel_rapl: Found RAPL domain uncore
[ 13.015751] intel_rapl: Found RAPL domain dram
[ 13.016857] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 13.045017] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 13.046059] acpi device:74: registered as cooling_device9
[ 13.046091] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input19
[ 13.047248] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.048239] acpi device:88: registered as cooling_device10
[ 13.066509] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 13.066577] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 13.066757] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7240a2
[ 13.066760] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 13.066761] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 13.066783] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 13.066791] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 13.066792] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 13.066847] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 13.066848] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 13.073101] snd_hda_intel 0000:00:03.0: irq 37 for MSI/MSI-X
[ 13.083239] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 13.083282] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 13.083317] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 13.173223] usb 3-10: new full-speed USB device number 10 using xhci_hcd
[ 13.347939] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 13.355779] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.0009/input/input24
[ 13.355964] hid-multitouch 0003:04F3:010C.0009: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 14.052192] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[ 14.057771] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input26
[ 14.057888] usbcore: registered new interface driver uvcvideo
[ 14.057890] USB Video Class driver (1.1.1)
[ 14.305064] Adding 16777212k swap on /dev/sda7. Priority:-1 extents:1 across:16777212k FS
[ 15.188586] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.401773] Bluetooth: Error in firmware loading err = -110,len = 448, size = 4096
[ 15.401814] Bluetooth: Loading patch file failed
[ 15.401838] ath3k: probe of 3-5:1.0 failed with error -110
[ 15.401874] usbcore: registered new interface driver ath3k
[ 15.452553] usb 3-10: USB disconnect, device number 10
[ 15.788727] usb 3-10: new full-speed USB device number 11 using xhci_hcd
[ 15.942695] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 15.960771] systemd-journald[175]: Received request to flush runtime journal from PID 1
[ 15.963448] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 15.971346] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.000A/input/input27
[ 15.971548] hid-multitouch 0003:04F3:010C.000A: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 17.423507] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 17.423511] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 17.423586] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 17.423589] nouveau [ VBIOS][0000:01:00.0] version 80.07.9a.00.4b
[ 17.423983] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 17.423991] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 17.986487] nouveau 0000:01:00.0: irq 38 for MSI/MSI-X
[ 17.986494] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 17.986539] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 17.986540] nouveau [ PFB][0000:01:00.0] RAM size: 4096 MiB
[ 17.986541] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 17.988058] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
[ 18.067815] usb 3-10: USB disconnect, device number 11
[ 18.390766] usb 3-10: new full-speed USB device number 12 using xhci_hcd
[ 18.565611] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 18.573246] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.000B/input/input29
[ 18.573477] hid-multitouch 0003:04F3:010C.000B: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 19.054580] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 19.054592] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 19.054603] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 19.054638] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
[ 19.054753] nouveau [ CLK][0000:01:00.0] 0a: core 405-1163 MHz memory 1600 MHz
[ 19.054899] nouveau [ CLK][0000:01:00.0] 0f: core 405-1163 MHz memory 1800 MHz
[ 19.055042] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
[ 19.093334] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
[ 19.093383] vga_switcheroo: enabled
[ 19.093488] [TTM] Zone kernel: Available graphics memory: 8159426 kiB
[ 19.093489] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 19.093490] [TTM] Initializing pool allocator
[ 19.093493] [TTM] Initializing DMA pool allocator
[ 19.093499] nouveau [ DRM] VRAM: 4096 MiB
[ 19.093500] nouveau [ DRM] GART: 1048576 MiB
[ 19.093503] nouveau E[ DRM] Pointer to TMDS table invalid
[ 19.093522] nouveau [ DRM] DCB version 4.0
[ 19.093523] nouveau E[ DRM] Pointer to flat panel table invalid
[ 19.100022] nouveau [ DRM] MM: using COPY for buffer copies
[ 19.100030] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 1
[ 19.153495] r8169 0000:05:00.0 enp5s0: link down
[ 19.153535] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 19.179742] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 19.238076] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
[ 19.238151] nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
[ 19.238236] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0xbadf1008 FAULT at 0x419cc0 [ IBUS ]
[ 19.238403] nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
[ 20.670198] usb 3-10: USB disconnect, device number 12
[ 21.006192] usb 3-10: new full-speed USB device number 13 using xhci_hcd
[ 21.181011] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 21.188381] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.000C/input/input31
[ 21.188667] hid-multitouch 0003:04F3:010C.000C: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 21.239982] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
[ 21.239989] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
[ 21.239999] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 21.240008] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
[ 21.240011] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
[ 21.240016] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 21.240020] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 21.240022] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
[ 26.303904] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 26.304234] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 26.304240] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 47.073514] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.073517] Bluetooth: BNEP filters: protocol multicast
[ 47.073523] Bluetooth: BNEP socket layer initialized
[ 58.016550] wlp4s0: authenticate with 00:24:89:d9:a5:0c
[ 58.037691] wlp4s0: send auth to 00:24:89:d9:a5:0c (try 1/3)
[ 58.039632] wlp4s0: authenticated
[ 58.042677] wlp4s0: associate with 00:24:89:d9:a5:0c (try 1/3)
[ 58.046166] wlp4s0: RX AssocResp from 00:24:89:d9:a5:0c (capab=0x411 status=0 aid=9)
[ 58.046250] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 58.046411] wlp4s0: associated
[ 135.063914] cfg80211: Calling CRDA to update world regulatory domaindmesg error boot:
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9bbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9bbc000-0x00000000b9bc2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9bc3000-0x00000000ba3fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba3fb000-0x00000000ba680fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba681000-0x00000000c98eafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98eb000-0x00000000c9af2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9af3000-0x00000000c9e25fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e26000-0x00000000cab25fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab26000-0x00000000caf59fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caf5a000-0x00000000caffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xc9eae000 ACPI=0xc9eae000 SMBIOS=0xcaf58418
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001053000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001053000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f53000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f53000-0x0000000037832000) (840MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037832000-0x0000000037c11000) (3MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037c11000-0x0000000084a72000) (1230MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000084a72000-0x00000000b67a0000) (797MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000b67a0000-0x00000000b9b9f000) (51MB)
[ 0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000b9b9f000-0x00000000b9bbc000) (0MB)
[ 0.000000] efi: mem13: type=10, attr=0xf, range=[0x00000000b9bbc000-0x00000000b9bc3000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000b9bc3000-0x00000000b9d17000) (1MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000b9d17000-0x00000000ba3bc000) (6MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ba3bc000-0x00000000ba3d8000) (0MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ba3d8000-0x00000000ba3f2000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ba3f2000-0x00000000ba3fb000) (0MB)
[ 0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x00000000ba3fb000-0x00000000ba681000) (2MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ba681000-0x00000000ba690000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ba690000-0x00000000c709a000) (202MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000c709a000-0x00000000c7342000) (2MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c7342000-0x00000000c7372000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000c7372000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c73a5000-0x00000000c73be000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000c73be000-0x00000000c8c8c000) (24MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c8c8c000-0x00000000c9624000) (9MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000c9624000-0x00000000c98eb000) (2MB)
[ 0.000000] efi: mem29: type=0, attr=0xf, range=[0x00000000c98eb000-0x00000000c9965000) (0MB)
[ 0.000000] efi: mem30: type=0, attr=0xf, range=[0x00000000c9965000-0x00000000c9af3000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c9af3000-0x00000000c9e1c000) (3MB)
[ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x00000000c9e1c000-0x00000000c9e26000) (0MB)
[ 0.000000] efi: mem33: type=10, attr=0xf, range=[0x00000000c9e26000-0x00000000caaee000) (12MB)
[ 0.000000] efi: mem34: type=10, attr=0xf, range=[0x00000000caaee000-0x00000000cab09000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000cab09000-0x00000000cab0d000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000cab0d000-0x00000000cab10000) (0MB)
[ 0.000000] efi: mem37: type=10, attr=0xf, range=[0x00000000cab10000-0x00000000cab26000) (0MB)
[ 0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x00000000cab26000-0x00000000cae83000) (3MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000cae83000-0x00000000caf5a000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000caf5a000-0x00000000caf7b000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000caf7b000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x000000042f200000) (13042MB)
[ 0.000000] efi: mem44: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. N550JV/N550JV, BIOS N550JV.208 11/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 042F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 042F400000 mask 7FFFC00000 uncachable
[ 0.000000] 9 base 042F200000 mask 7FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42f000000-0x42f1fffff]
[ 0.000000] [mem 0x42f000000-0x42f1fffff] page 2M
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42effffff]
[ 0.000000] [mem 0x42c000000-0x42effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb99fffff] page 2M
[ 0.000000] [mem 0xb9a00000-0xb9bbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] [mem 0xb9bc3000-0xb9bfffff] page 4k
[ 0.000000] [mem 0xb9c00000-0xba1fffff] page 2M
[ 0.000000] [mem 0xba200000-0xba3fafff] page 4k
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba681000-0xc98eafff]
[ 0.000000] [mem 0xba681000-0xba7fffff] page 4k
[ 0.000000] [mem 0xba800000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98eafff] page 4k
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] [mem 0xc9af3000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e25fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37832000-0x37c10fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9EAE000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9EAE090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EC1100 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9EAE248 012EB5 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB23080 000040
[ 0.000000] ACPI: APIC 0x00000000C9EC1210 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EC12A8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EC12F0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC13B8 00019D (v01 Intel zpodd 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1558 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1A98 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000C9EC2570 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9EC25B0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC25E8 000298 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC2880 0042F6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC6B78 001699 (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000C9EC8218 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: DMAR 0x00000000C9EC8250 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C9EC8308 0019E3 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AF1E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42f1fffff]
[ 0.000000] NODE_DATA [mem 0x42f1f5000-0x42f1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e800000-ffff88042e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] node 0: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] node 0: [mem 0xba681000-0xc98eafff]
[ 0.000000] node 0: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x42f1fffff]
[ 0.000000] On node 0 totalpages: 4164398
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12839 pages used for memmap
[ 0.000000] DMA32 zone: 821650 pages, LIFO batch:31
[ 0.000000] Normal zone: 52168 pages used for memmap
[ 0.000000] Normal zone: 3338752 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9bbc000-0xb9bc2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba3fb000-0xba680fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98eb000-0xc9af2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e26000-0xcab25fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab26000-0xcaf59fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf5a000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042ee00000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4099305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16272992K/16657592K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 384600K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.594 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.73 BogoMIPS (lpj=7981980)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20140724
[ 0.014776] ACPI: All ACPI Tables successfully acquired
[ 0.016364] Security Framework initialized
[ 0.016369] Yama: becoming mindful.
[ 0.017066] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.019259] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.020192] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.020205] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.020381] Initializing cgroup subsys memory
[ 0.020385] Initializing cgroup subsys devices
[ 0.020386] Initializing cgroup subsys freezer
[ 0.020388] Initializing cgroup subsys net_cls
[ 0.020389] Initializing cgroup subsys blkio
[ 0.020405] CPU: Physical Processor ID: 0
[ 0.020406] CPU: Processor Core ID: 0
[ 0.020409] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.021173] mce: CPU supports 9 MCE banks
[ 0.021184] CPU0: Thermal monitoring enabled (TM1)
[ 0.021193] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.021266] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.022618] ftrace: allocating 20675 entries in 81 pages
[ 0.028859] dmar: Host address width 39
[ 0.028860] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.028867] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.028867] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028871] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.028872] dmar: RMRR base: 0x000000c9a8a000 end: 0x000000c9a96fff
[ 0.028873] dmar: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.028938] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.028939] HPET id 0 under DRHD base 0xfed91000
[ 0.028939] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.029056] Enabled IRQ remapping in x2apic mode
[ 0.029057] Enabling x2apic
[ 0.029058] Enabled x2apic
[ 0.029063] Switched APIC routing to cluster x2apic.
[ 0.029452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062484] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.062489] TSC deadline timer enabled
[ 0.062507] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.062522] ... version: 3
[ 0.062522] ... bit width: 48
[ 0.062523] ... generic registers: 4
[ 0.062524] ... value mask: 0000ffffffffffff
[ 0.062524] ... max period: 0000ffffffffffff
[ 0.062525] ... fixed-purpose events: 3
[ 0.062525] ... event mask: 000000070000000f
[ 0.082620] x86: Booting SMP configuration:
[ 0.082621] .... node #0, CPUs: #1
[ 0.093744] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.096707] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103392] #2
[ 0.114487] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.124148] #3
[ 0.135245] CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.144905] #4 #5 #6 #7
[ 0.220812] x86: Booted up 1 node, 8 CPUs
[ 0.220815] smpboot: Total of 8 processors activated (38328.90 BogoMIPS)
[ 0.226672] devtmpfs: initialized
[ 0.228679] PM: Registering ACPI NVS region [mem 0xb9bbc000-0xb9bc2fff] (28672 bytes)
[ 0.228681] PM: Registering ACPI NVS region [mem 0xc9e26000-0xcab25fff] (13631488 bytes)
[ 0.229346] pinctrl core: initialized pinctrl subsystem
[ 0.229377] RTC time: 19:35:01, date: 11/04/14
[ 0.229439] NET: Registered protocol family 16
[ 0.229515] cpuidle: using governor ladder
[ 0.229517] cpuidle: using governor menu
[ 0.229537] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.229538] ACPI: bus type PCI registered
[ 0.229539] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.229590] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.229591] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.229649] PCI: Using configuration type 1 for base access
[ 0.243541] ACPI: Added _OSI(Module Device)
[ 0.243543] ACPI: Added _OSI(Processor Device)
[ 0.243544] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243545] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.245579] ACPI : EC: EC description table is found, configuring boot EC
[ 0.247391] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.326789] ACPI: Dynamic OEM Table Load:
[ 0.326796] ACPI: SSDT 0xFFFF8804180FB800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.340288] ACPI: Dynamic OEM Table Load:
[ 0.340295] ACPI: SSDT 0xFFFF880418198000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.353486] ACPI: Dynamic OEM Table Load:
[ 0.353491] ACPI: SSDT 0xFFFF8804181A8000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.367960] ACPI: Interpreter enabled
[ 0.367969] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.367976] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.367994] ACPI: (supports S0 S3 S4 S5)
[ 0.367995] ACPI: Using IOAPIC for interrupt routing
[ 0.368022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.386271] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.386275] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.386285] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.386287] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.387141] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.387145] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.387493] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.387838] PCI host bridge to bus 0000:00
[ 0.387840] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.387841] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.387842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.387843] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.387844] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.387845] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.387846] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.387847] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.387848] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.387849] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.387850] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.387851] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.387852] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.387857] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.387917] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.387944] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.387978] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.388007] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.388015] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.388019] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.388022] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.388076] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.388081] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.388160] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.388176] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.388229] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.388256] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.388282] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.388299] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[ 0.388355] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.388415] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.388433] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.388513] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.388550] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.388578] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.388592] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.388652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.388681] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.388706] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.388765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.388794] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.388818] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.388878] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.388930] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.388990] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.389020] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.389044] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.389103] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.389133] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.389165] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.389183] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.389263] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.389300] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.389328] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.389466] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.389480] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.389486] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.389493] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.389499] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.389506] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.389513] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.389545] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.389591] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.389604] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.389621] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.389710] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
[ 0.389717] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.389724] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.389731] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.389735] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.389740] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.389776] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.393490] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.393493] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.393495] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.393498] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.393565] acpiphp: Slot [1] registered
[ 0.393570] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.393646] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.393732] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[ 0.393758] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.393811] pci 0000:04:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.393881] pci 0000:04:00.0: supports D1 D2
[ 0.393882] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393909] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.400172] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.400177] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.400263] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.400283] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.400312] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.400331] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.400423] pci 0000:05:00.0: supports D1 D2
[ 0.400425] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.400457] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.406850] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.406853] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.406857] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.406862] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.406888] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.407575] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.407616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407656] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407735] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407772] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407809] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407845] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.407875] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.407879] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.408074] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.408142] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.408234] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.408236] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.408239] vgaarb: loaded
[ 0.408240] vgaarb: bridge control possible 0000:00:02.0
[ 0.408303] PCI: Using ACPI for IRQ routing
[ 0.409500] PCI: pci_cache_line_size set to 64 bytes
[ 0.409545] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.409546] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.409546] e820: reserve RAM buffer [mem 0xb9bbc000-0xbbffffff]
[ 0.409547] e820: reserve RAM buffer [mem 0xba3fb000-0xbbffffff]
[ 0.409548] e820: reserve RAM buffer [mem 0xc98eb000-0xcbffffff]
[ 0.409549] e820: reserve RAM buffer [mem 0xc9e26000-0xcbffffff]
[ 0.409550] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.409551] e820: reserve RAM buffer [mem 0x42f200000-0x42fffffff]
[ 0.409616] NetLabel: Initializing
[ 0.409617] NetLabel: domain hash size = 128
[ 0.409618] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.409625] NetLabel: unlabeled traffic allowed by default
[ 0.409644] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.409647] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.411672] Switched to clocksource hpet
[ 0.414912] pnp: PnP ACPI init
[ 0.414967] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.414969] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.415128] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.415129] system 00:01: [io 0xffff] has been reserved
[ 0.415131] system 00:01: [io 0xffff] has been reserved
[ 0.415132] system 00:01: [io 0xffff] has been reserved
[ 0.415133] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.415134] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.415135] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.415136] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.415137] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.415138] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.415140] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415159] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.415188] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.415190] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.415218] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.415219] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415239] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.415241] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415276] pnp 00:06: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.415301] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.415533] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.415534] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.415535] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.415537] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.415538] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.415539] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.415540] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.415541] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.415543] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.415544] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.415545] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.415546] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.415548] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415592] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.415688] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.415691] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.415769] pnp: PnP ACPI: found 10 devices
[ 0.421725] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.421727] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.421729] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.421742] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.421744] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.421745] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.421749] pci 0000:00:1c.1: BAR 14: assigned [mem 0xcfe00000-0xcfffffff]
[ 0.421754] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.421756] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.421758] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.421759] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.421761] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.421763] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.421766] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.421774] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.421777] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.421781] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfffffff]
[ 0.421784] pci 0000:00:1c.1: bridge window [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.421789] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.421793] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.421799] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.421802] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.421806] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.421809] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.421815] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.421816] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.421817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.421818] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.421819] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.421820] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.421821] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.421822] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.421823] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.421824] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.421825] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.421826] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff]
[ 0.421827] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.421828] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.421829] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.421830] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.421831] pci_bus 0000:03: resource 1 [mem 0xcfe00000-0xcfffffff]
[ 0.421832] pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.421833] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.421834] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.421835] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.421836] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.421853] NET: Registered protocol family 2
[ 0.422007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.422148] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.422249] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.422261] TCP: reno registered
[ 0.422273] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.422311] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.422367] NET: Registered protocol family 1
[ 0.422377] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.422705] PCI: CLS 64 bytes, default 64
[ 0.422732] Unpacking initramfs...
[ 0.462266] Freeing initrd memory: 3964K (ffff880037832000 - ffff880037c11000)
[ 0.462280] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.462282] software IO TLB [mem 0xc309a000-0xc709a000] (64MB) mapped at [ffff8800c309a000-ffff8800c7099fff]
[ 0.462490] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.462527] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462533] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462539] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462542] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462547] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462552] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462558] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462563] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.462597] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.462615] Scanning for low memory corruption every 60 seconds
[ 0.462796] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.462812] Initialise system trusted keyring
[ 0.463032] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.463845] zpool: loaded
[ 0.463847] zbud: loaded
[ 0.463960] VFS: Disk quotas dquot_6.5.2
[ 0.463981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.464057] msgmni has been set to 31868
[ 0.464095] Key type big_key registered
[ 0.464196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.464233] io scheduler noop registered
[ 0.464235] io scheduler deadline registered
[ 0.464253] io scheduler cfq registered (default)
[ 0.464355] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.464444] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.464540] pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X
[ 0.464642] pcieport 0000:00:1c.2: irq 29 for MSI/MSI-X
[ 0.464736] pcieport 0000:00:1c.3: irq 30 for MSI/MSI-X
[ 0.464796] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.464797] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.464799] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.464809] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.464812] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.464823] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.464825] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.464836] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.464837] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.464840] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.464850] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.464851] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.464854] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.464863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.464892] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.464919] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.464922] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.464945] efifb: probing for efifb
[ 0.464960] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 0.464961] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.464961] efifb: scrolling: redraw
[ 0.464962] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.467883] Console: switching to colour frame buffer device 240x67
[ 0.471167] fb0: EFI VGA frame buffer device
[ 0.471173] intel_idle: MWAIT substates: 0x42120
[ 0.471174] intel_idle: v0.4 model 0x3C
[ 0.471175] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.471392] GHES: HEST is not enabled!
[ 0.471445] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.471761] Linux agpgart interface v0.103
[ 0.471813] rtc_cmos 00:02: RTC can wake from S4
[ 0.471921] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.471945] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.471953] Intel P-state driver initializing.
[ 0.472114] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.472367] TCP: cubic registered
[ 0.472588] NET: Registered protocol family 10
[ 0.473109] NET: Registered protocol family 17
[ 0.473935] Loading compiled-in X.509 certificates
[ 0.473965] registered taskstats version 1
[ 0.475344] Magic number: 6:376:596
[ 0.475515] rtc_cmos 00:02: setting system clock to 2014-11-04 19:35:01 UTC (1415129701)
[ 0.475710] PM: Hibernation image not present or could not be loaded.
[ 0.477668] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.477672] Write protecting the kernel read-only data: 8192k
[ 0.482613] Freeing unused kernel memory: 752K (ffff880002544000 - ffff880002600000)
[ 0.484449] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
[ 0.497156] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.499107] systemd-udevd[77]: starting version 216
[ 0.516004] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.518459] i8042: Detected active multiplexing controller, rev 1.1
[ 0.521017] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.521037] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.521040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.521042] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.521044] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.522004] ACPI: bus type USB registered
[ 0.522027] usbcore: registered new interface driver usbfs
[ 0.522045] usbcore: registered new interface driver hub
[ 0.522125] usbcore: registered new device driver usb
[ 0.522708] SCSI subsystem initialized
[ 0.522854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.522969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.522979] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.523063] ehci-pci: EHCI PCI platform driver
[ 0.523089] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.523110] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.523302] hub 1-0:1.0: USB hub found
[ 0.523324] hub 1-0:1.0: 14 ports detected
[ 0.523772] libata version 3.00 loaded.
[ 0.526096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.526100] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.526248] hub 2-0:1.0: USB hub found
[ 0.526260] hub 2-0:1.0: 4 ports detected
[ 0.527199] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.527205] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.527217] ehci-pci 0000:00:1a.0: debug port 2
[ 0.531135] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.531149] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 0.538482] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.538618] hub 3-0:1.0: USB hub found
[ 0.538623] hub 3-0:1.0: 2 ports detected
[ 0.538844] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.538849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.538860] ehci-pci 0000:00:1d.0: debug port 2
[ 0.542767] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.542781] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.551831] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.551985] hub 4-0:1.0: USB hub found
[ 0.551989] hub 4-0:1.0: 2 ports detected
[ 0.552109] ahci 0000:00:1f.2: version 3.0
[ 0.552235] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.552288] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[ 0.552292] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.559066] scsi host0: ahci
[ 0.559314] scsi host1: ahci
[ 0.559489] scsi host2: ahci
[ 0.559608] scsi host3: ahci
[ 0.559715] scsi host4: ahci
[ 0.559750] ata1: DUMMY
[ 0.559751] ata2: DUMMY
[ 0.559753] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 32
[ 0.559754] ata4: DUMMY
[ 0.559757] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 32
[ 0.570522] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.878790] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.878810] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.880312] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C2 S, 1.00, max UDMA/133
[ 0.881675] ata3.00: configured for UDMA/133
[ 0.883024] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 S 1.00 PQ: 0 ANSI: 5
[ 0.885413] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.885417] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.885419] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.885499] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 0.891762] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
[ 0.891765] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.898376] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.898380] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.898382] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.904753] ata5.00: configured for UDMA/133
[ 0.904843] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 0.917743] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.917746] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.917867] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.917964] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.917966] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 0.917985] sd 4:0:0:0: [sda] Write Protect is off
[ 0.917987] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.917995] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.973064] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 0.973692] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.063469] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.067043] usbcore: registered new interface driver usbhid
[ 1.067044] usbhid: USB HID core driver
[ 1.068285] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 1.119748] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[ 1.119799] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-3:1
[ 1.222408] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 1.465903] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[ 1.555999] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 1.993032] usb 1-8: new high-speed USB device number 5 using xhci_hcd
[ 2.093244] random: nonblocking pool is initialized
[ 2.169415] usbcore: registered new interface driver rtsx_usb
[ 2.266582] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.326646] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[ 2.466936] Switched to clocksource tsc
[ 2.502024] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.613522] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.737537] hub 3-1:1.0: USB hub found
[ 2.737629] hub 3-1:1.0: 6 ports detected
[ 2.843685] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.967961] hub 4-1:1.0: USB hub found
[ 2.968062] hub 4-1:1.0: 8 ports detected
[ 4.603960] usb 1-10: USB disconnect, device number 6
[ 4.745737] systemd-readahead[175]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.912090] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 5.087258] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.175349] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 5.470684] vboxdrv: Found 8 processor cores.
[ 5.471155] vboxdrv: fAsync=0 offMin=0x19b offMax=0x8d4e
[ 5.471203] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.471204] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 5.824144] systemd-udevd[209]: starting version 216
[ 5.896286] vboxpci: IOMMU not found (not registered)
[ 7.189267] usb 1-10: USB disconnect, device number 7
[ 7.497443] usb 1-10: new full-speed USB device number 8 using xhci_hcd
[ 7.670306] ACPI: AC Adapter [AC0] (on-line)
[ 7.690745] ACPI: Battery Slot [BAT0] (battery present)
[ 7.713386] wmi: Mapper loaded
[ 7.721111] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.791180] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 7.792360] ACPI: Lid Switch [LID]
[ 7.792413] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 7.792415] ACPI: Sleep Button [SLPB]
[ 7.792449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 7.792450] ACPI: Power Button [PWRF]
[ 7.792996] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.792999] ACPI: Thermal Zone [THRM] (47 C)
[ 8.128163] mei_me 0000:00:16.0: irq 33 for MSI/MSI-X
[ 8.503110] EDAC MC: Ver: 3.0.0
[ 8.511841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.511848] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.518602] r8169 0000:05:00.0: irq 34 for MSI/MSI-X
[ 8.518774] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc900018d8000, ac:22:0b:02:e5:73, XID 0c000800 IRQ 34
[ 8.518776] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.540536] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.548252] EDAC ie31200: No ECC support
[ 8.571949] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140724/utaddress-258)
[ 8.571954] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 8.571956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.977886] [drm] Initialized drm 1.1.0 20060810
[ 9.012491] [drm] Memory usable by graphics device = 2048M
[ 9.012494] [drm] Replacing VGA console driver
[ 9.012496] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 9.012497] fb: switching to inteldrmfb from EFI VGA
[ 9.012510] Console: switching to colour dummy device 80x25
[ 9.032006] i915 0000:00:02.0: irq 35 for MSI/MSI-X
[ 9.032015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.032016] [drm] Driver supports precise vblank timestamp query.
[ 9.032039] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.070471] [drm] VBT doesn't support DRRS
[ 9.233737] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
[ 9.308854] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 9.323076] fbcon: inteldrmfb (fb0) is primary device
[ 9.361121] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 9.395740] systemd-udevd[223]: renamed network interface eth0 to enp5s0
[ 9.501959] cfg80211: Calling CRDA to update world regulatory domain
[ 9.542853] asus_wmi: ASUS WMI generic driver loaded
[ 9.543262] asus_wmi: Initialization: 0x1
[ 9.543288] asus_wmi: BIOS WMI version: 7.9
[ 9.543324] asus_wmi: SFUN value: 0x6a0877
[ 9.544160] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[ 9.579741] iTCO_vendor_support: vendor-support=0
[ 9.590411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.590433] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 9.590522] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.620191] asus_wmi: Backlight controlled by ACPI video driver
[ 9.645565] MXM: GUID detected in BIOS
[ 9.645622] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 9.645656] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 9.645848] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 9.645849] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 9.774452] usb 1-10: unable to read config index 0 descriptor/start: -71
[ 9.774453] usb 1-10: can't read configurations, error -71
[ 9.932796] usb 1-10: new full-speed USB device number 9 using xhci_hcd
[ 9.949400] AVX2 version of gcm_enc/dec engaged.
[ 10.074407] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 10.090090] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 10.107631] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 10.164689] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 10.346892] ath: phy0: Set parameters for CUS198
[ 10.346892] ath: phy0: Set BT/WLAN RX diversity capability
[ 10.352895] ath: phy0: Enable LNA combining
[ 10.354085] ath: EEPROM regdomain: 0x60
[ 10.354085] ath: EEPROM indicates we should expect a direct regpair map
[ 10.354086] ath: Country alpha2 being used: 00
[ 10.354086] ath: Regpair used: 0x60
[ 10.355910] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.356108] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90016b00000, irq=18
[ 10.389754] Console: switching to colour frame buffer device 240x67
[ 10.395236] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.395238] i915 0000:00:02.0: registered panic notifier
[ 10.410783] mousedev: PS/2 mouse device common for all mice
[ 10.413459] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 10.433231] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[ 10.437897] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 10.438914] acpi device:74: registered as cooling_device8
[ 10.438943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input15
[ 10.440103] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.441106] acpi device:88: registered as cooling_device9
[ 10.449389] systemd-udevd[223]: renamed network interface wlan0 to wlp4s0
[ 10.457234] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[ 10.457319] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 10.457459] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7240a2
[ 10.457461] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 10.457462] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 10.457480] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 10.457488] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.457489] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 10.457544] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.457545] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 10.457548] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'alsa/n550-bass'
[ 10.463155] snd_hda_intel 0000:00:03.0: irq 36 for MSI/MSI-X
[ 10.473185] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 10.473247] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 10.473279] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 11.501341] snd_hda_intel 0000:00:1b.0: irq 37 for MSI/MSI-X
[ 11.512253] sound hdaudioC1D0: autoconfig: line_outs=2 (0x14/0x1a/0x0/0x0/0x0) type:speaker
[ 11.512256] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.512257] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.512258] sound hdaudioC1D0: mono: mono_out=0x0
[ 11.512259] sound hdaudioC1D0: inputs:
[ 11.512261] sound hdaudioC1D0: Mic=0x1b
[ 11.512262] sound hdaudioC1D0: Internal Mic=0x12
[ 11.518350] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 11.518410] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 11.960948] intel_rapl: Found RAPL domain package
[ 11.960952] intel_rapl: Found RAPL domain core
[ 11.960955] intel_rapl: Found RAPL domain uncore
[ 11.960957] intel_rapl: Found RAPL domain dram
[ 12.210634] usb 1-10: USB disconnect, device number 9
[ 12.518240] usb 1-10: new full-speed USB device number 10 using xhci_hcd
[ 12.693017] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 14.243823] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0008/input/input22
[ 14.244048] hid-multitouch 0003:04F3:010C.0008: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 14.706808] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 14.706812] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 14.706887] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 14.706889] nouveau [ VBIOS][0000:01:00.0] version 80.07.9a.00.4b
[ 14.707283] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 14.707291] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 14.796355] usb 1-10: USB disconnect, device number 10
[ 14.840915] media: Linux media interface: v0.10
[ 14.879462] Adding 16777212k swap on /dev/sda7. Priority:-1 extents:1 across:16777212k FS
[ 14.997286] Linux video capture interface: v2.00
[ 15.012730] Bluetooth: Core ver 2.19
[ 15.012741] NET: Registered protocol family 31
[ 15.012742] Bluetooth: HCI device and connection manager initialized
[ 15.012747] Bluetooth: HCI socket layer initialized
[ 15.012748] Bluetooth: L2CAP socket layer initialized
[ 15.012755] Bluetooth: SCO socket layer initialized
[ 15.043447] usbcore: registered new interface driver btusb
[ 15.136944] usb 1-10: new full-speed USB device number 11 using xhci_hcd
[ 15.196527] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[ 15.201871] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input24
[ 15.201977] usbcore: registered new interface driver uvcvideo
[ 15.201978] USB Video Class driver (1.1.1)
[ 15.269807] nouveau 0000:01:00.0: irq 38 for MSI/MSI-X
[ 15.269816] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 15.269859] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 15.269860] nouveau [ PFB][0000:01:00.0] RAM size: 4096 MiB
[ 15.269861] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 15.271675] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
[ 15.311786] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 15.319152] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0009/input/input25
[ 15.319462] hid-multitouch 0003:04F3:010C.0009: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 15.337352] usbcore: registered new interface driver ath3k
[ 15.337444] usb 1-5: USB disconnect, device number 3
[ 15.647355] usb 1-5: new full-speed USB device number 12 using xhci_hcd
[ 15.765942] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 16.337871] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 16.337880] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 16.337891] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 16.337921] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
[ 16.337983] nouveau [ CLK][0000:01:00.0] 0a: core 405-1163 MHz memory 1600 MHz
[ 16.338066] nouveau [ CLK][0000:01:00.0] 0f: core 405-1163 MHz memory 1800 MHz
[ 16.338203] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
[ 16.371980] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
[ 16.372036] vga_switcheroo: enabled
[ 16.372203] [TTM] Zone kernel: Available graphics memory: 8159426 kiB
[ 16.372204] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 16.372216] [TTM] Initializing pool allocator
[ 16.372219] [TTM] Initializing DMA pool allocator
[ 16.372225] nouveau [ DRM] VRAM: 4096 MiB
[ 16.372226] nouveau [ DRM] GART: 1048576 MiB
[ 16.372229] nouveau E[ DRM] Pointer to TMDS table invalid
[ 16.372255] nouveau [ DRM] DCB version 4.0
[ 16.372256] nouveau E[ DRM] Pointer to flat panel table invalid
[ 16.378358] nouveau [ DRM] MM: using COPY for buffer copies
[ 16.378365] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 1
[ 16.675607] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 17.088791] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 20.830017] usb 1-10: USB disconnect, device number 11
[ 21.171892] usb 1-10: new full-speed USB device number 13 using xhci_hcd
[ 21.347155] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 21.354928] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000A/input/input27
[ 21.355123] hid-multitouch 0003:04F3:010C.000A: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 23.353613] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 23.353945] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 23.353950] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 23.450479] usb 1-10: USB disconnect, device number 13
[ 23.777242] usb 1-10: new full-speed USB device number 14 using xhci_hcd
[ 23.952034] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 23.959269] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000B/input/input29
[ 23.959539] hid-multitouch 0003:04F3:010C.000B: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 26.055412] usb 1-10: USB disconnect, device number 14
[ 26.382765] usb 1-10: new full-speed USB device number 15 using xhci_hcd
[ 26.558022] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 26.565875] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000C/input/input31
[ 26.566085] hid-multitouch 0003:04F3:010C.000C: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 28.357750] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.357754] Bluetooth: BNEP filters: protocol multicast
[ 28.357761] Bluetooth: BNEP socket layer initialized
[ 28.660628] usb 1-10: USB disconnect, device number 15
[ 28.836798] r8169 0000:05:00.0 enp5s0: link down
[ 28.836853] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 28.866683] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 28.998138] usb 1-10: new full-speed USB device number 16 using xhci_hcd
[ 29.173449] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 29.181108] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000D/input/input33
[ 29.181426] hid-multitouch 0003:04F3:010C.000D: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 29.660186] cfg80211: Calling CRDA to update world regulatory domain
[ 31.276161] usb 1-10: USB disconnect, device number 16
[ 31.600261] usb 1-10: new full-speed USB device number 17 using xhci_hcd
[ 31.775550] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 31.783492] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000E/input/input35
[ 31.783788] hid-multitouch 0003:04F3:010C.000E: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 33.878645] usb 1-10: USB disconnect, device number 17
[ 34.242404] usb 1-10: new full-speed USB device number 18 using xhci_hcd
[ 34.417642] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 34.425553] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.000F/input/input37
[ 34.425698] hid-multitouch 0003:04F3:010C.000F: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 36.521088] usb 1-10: USB disconnect, device number 18
[ 36.844504] usb 1-10: new full-speed USB device number 19 using xhci_hcd
[ 37.019700] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 37.027605] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0010/input/input39
[ 37.027814] hid-multitouch 0003:04F3:010C.0010: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 39.123116] usb 1-10: USB disconnect, device number 19
[ 39.459958] usb 1-10: new full-speed USB device number 20 using xhci_hcd
[ 39.635250] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 39.643058] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0011/input/input41
[ 39.643268] hid-multitouch 0003:04F3:010C.0011: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 41.738881] usb 1-10: USB disconnect, device number 20
[ 42.075374] usb 1-10: new full-speed USB device number 21 using xhci_hcd
[ 42.250622] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 42.258483] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0012/input/input43
[ 42.258688] hid-multitouch 0003:04F3:010C.0012: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 44.354329] usb 1-10: USB disconnect, device number 21
[ 44.690779] usb 1-10: new full-speed USB device number 22 using xhci_hcd
[ 44.865668] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 44.873075] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0013/input/input45
[ 44.873400] hid-multitouch 0003:04F3:010C.0013: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 45.338365] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
[ 45.338416] nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
[ 45.338507] nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x3f800000 FAULT at 0x405804 [ IBUS ]
[ 45.338649] nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
[ 46.969252] usb 1-10: USB disconnect, device number 22
[ 47.296179] usb 1-10: new full-speed USB device number 23 using xhci_hcd
[ 47.340228] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
[ 47.340234] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
[ 47.340244] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 47.340253] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
[ 47.340256] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
[ 47.340261] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 47.340265] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 47.340267] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
[ 47.471249] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 47.478932] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0014/input/input47
[ 47.479131] hid-multitouch 0003:04F3:010C.0014: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 53.351160] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 53.351560] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 53.351567] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 85.836113] cfg80211: Calling CRDA to update world regulatory domainXorg.0.log correct:
[ 19.108]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 19.108] X Protocol Version 11, Revision 0
[ 19.108] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 19.108] Current Operating System: Linux N550JV 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 19.108] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 19.108] Build Date: 21 September 2014 10:53:13AM
[ 19.108]
[ 19.108] Current version of pixman: 0.32.6
[ 19.108] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.108] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.108] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 4 20:55:11 2014
[ 19.129] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.129] (==) No Layout section. Using the first Screen section.
[ 19.129] (==) No screen section available. Using defaults.
[ 19.129] (**) |-->Screen "Default Screen Section" (0)
[ 19.129] (**) | |-->Monitor "<default monitor>"
[ 19.129] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.129] (==) Automatically adding devices
[ 19.129] (==) Automatically enabling devices
[ 19.129] (==) Automatically adding GPU devices
[ 19.129] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.129] Entry deleted from font path.
[ 19.142] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.142] Entry deleted from font path.
[ 19.142] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.142] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.142] Entry deleted from font path.
[ 19.142] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.142] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.142] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.142] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.142] (II) Loader magic: 0x818d80
[ 19.142] (II) Module ABI versions:
[ 19.142] X.Org ANSI C Emulation: 0.4
[ 19.142] X.Org Video Driver: 18.0
[ 19.142] X.Org XInput driver : 21.0
[ 19.142] X.Org Server Extension : 8.0
[ 19.143] (EE) systemd-logind: failed to get session: PID 591 does not belong to any known session
[ 19.143] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 19.143] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.144] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 19.144] (--) PCI: (0:1:0:0) 10de:0fe4:1043:11cd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 19.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19.144] (II) LoadModule: "glx"
[ 19.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.157] (II) Module glx: vendor="X.Org Foundation"
[ 19.157] compiled for 1.16.1, module version = 1.0.0
[ 19.157] ABI class: X.Org Server Extension, version 8.0
[ 19.157] (==) AIGLX enabled
[ 19.157] (==) Matched intel as autoconfigured driver 0
[ 19.157] (==) Matched nouveau as autoconfigured driver 1
[ 19.157] (==) Matched nvidia as autoconfigured driver 2
[ 19.157] (==) Matched nv as autoconfigured driver 3
[ 19.157] (==) Matched intel as autoconfigured driver 4
[ 19.157] (==) Matched modesetting as autoconfigured driver 5
[ 19.157] (==) Matched fbdev as autoconfigured driver 6
[ 19.157] (==) Matched vesa as autoconfigured driver 7
[ 19.157] (==) Assigned the driver to the xf86ConfigLayout
[ 19.157] (II) LoadModule: "intel"
[ 19.157] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.157] (II) Module intel: vendor="X.Org Foundation"
[ 19.157] compiled for 1.16.1, module version = 2.99.916
[ 19.157] Module class: X.Org Video Driver
[ 19.157] ABI class: X.Org Video Driver, version 18.0
[ 19.158] (II) LoadModule: "nouveau"
[ 19.158] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 19.158] (II) Module nouveau: vendor="X.Org Foundation"
[ 19.158] compiled for 1.16.1, module version = 1.0.11
[ 19.158] Module class: X.Org Video Driver
[ 19.158] ABI class: X.Org Video Driver, version 18.0
[ 19.158] (II) LoadModule: "nvidia"
[ 19.158] (WW) Warning, couldn't open module nvidia
[ 19.158] (II) UnloadModule: "nvidia"
[ 19.158] (II) Unloading nvidia
[ 19.158] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 19.158] (II) LoadModule: "nv"
[ 19.158] (WW) Warning, couldn't open module nv
[ 19.158] (II) UnloadModule: "nv"
[ 19.158] (II) Unloading nv
[ 19.158] (EE) Failed to load module "nv" (module does not exist, 0)
[ 19.158] (II) LoadModule: "modesetting"
[ 19.159] (WW) Warning, couldn't open module modesetting
[ 19.159] (II) UnloadModule: "modesetting"
[ 19.159] (II) Unloading modesetting
[ 19.159] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 19.159] (II) LoadModule: "fbdev"
[ 19.159] (WW) Warning, couldn't open module fbdev
[ 19.159] (II) UnloadModule: "fbdev"
[ 19.159] (II) Unloading fbdev
[ 19.159] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 19.159] (II) LoadModule: "vesa"
[ 19.159] (WW) Warning, couldn't open module vesa
[ 19.159] (II) UnloadModule: "vesa"
[ 19.159] (II) Unloading vesa
[ 19.159] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 19.159] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 19.159] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 19.159] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 19.159] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 19.159] (II) NOUVEAU driver
[ 19.159] (II) NOUVEAU driver for NVIDIA chipset families :
[ 19.159] RIVA TNT (NV04)
[ 19.159] RIVA TNT2 (NV05)
[ 19.159] GeForce 256 (NV10)
[ 19.160] GeForce 2 (NV11, NV15)
[ 19.160] GeForce 4MX (NV17, NV18)
[ 19.160] GeForce 3 (NV20)
[ 19.160] GeForce 4Ti (NV25, NV28)
[ 19.160] GeForce FX (NV3x)
[ 19.160] GeForce 6 (NV4x)
[ 19.160] GeForce 7 (G7x)
[ 19.160] GeForce 8 (G8x)
[ 19.160] GeForce GTX 200 (NVA0)
[ 19.160] GeForce GTX 400 (NVC0)
[ 19.160] (++) using VT number 7
[ 19.165] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 19.166] (II) [drm] nouveau interface version: 1.2.0
[ 19.166] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 19.166] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 19.166] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.166] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.166] (==) intel(0): RGB weight 888
[ 19.166] (==) intel(0): Default visual is TrueColor
[ 19.166] (II) intel(0): Output eDP1 has no monitor section
[ 19.166] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output eDP1
[ 19.166] (II) intel(0): Enabled output eDP1
[ 19.166] (II) intel(0): Output VGA1 has no monitor section
[ 19.166] (II) intel(0): Enabled output VGA1
[ 19.166] (II) intel(0): Output DP1 has no monitor section
[ 19.166] (II) intel(0): Enabled output DP1
[ 19.166] (II) intel(0): Output HDMI1 has no monitor section
[ 19.166] (II) intel(0): Enabled output HDMI1
[ 19.166] (II) intel(0): Output HDMI2 has no monitor section
[ 19.166] (II) intel(0): Enabled output HDMI2
[ 19.166] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 19.210] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 19.210] (II) intel(0): Enabled output VIRTUAL1
[ 19.210] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 19.210] (==) intel(0): TearFree disabled
[ 19.210] (==) intel(0): DPI set to (96, 96)
[ 19.210] (II) Loading sub module "dri2"
[ 19.210] (II) LoadModule: "dri2"
[ 19.210] (II) Module "dri2" already built-in
[ 19.210] (II) Loading sub module "present"
[ 19.210] (II) LoadModule: "present"
[ 19.210] (II) Module "present" already built-in
[ 19.210] (II) Loading sub module "dri2"
[ 19.210] (II) LoadModule: "dri2"
[ 19.210] (II) Module "dri2" already built-in
[ 19.210] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE7"
[ 19.210] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 19.210] (==) NOUVEAU(G0): RGB weight 888
[ 19.210] (==) NOUVEAU(G0): Default visual is TrueColor
[ 19.210] (==) NOUVEAU(G0): Using HW cursor
[ 19.210] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 19.210] (==) NOUVEAU(G0): Page flipping enabled
[ 19.210] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 19.210] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 19.210] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.210] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 19.210] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 19.210] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 19.210] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 19.210] (II) Loading sub module "fb"
[ 19.210] (II) LoadModule: "fb"
[ 19.210] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.211] (II) Module fb: vendor="X.Org Foundation"
[ 19.211] compiled for 1.16.1, module version = 1.0.0
[ 19.211] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.211] (II) Loading sub module "shadowfb"
[ 19.211] (II) LoadModule: "shadowfb"
[ 19.211] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 19.211] (II) Module shadowfb: vendor="X.Org Foundation"
[ 19.211] compiled for 1.16.1, module version = 1.0.0
[ 19.211] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.211] (==) Depth 24 pixmap format is 32 bpp
[ 21.217] (EE) NOUVEAU(G0): Failed to initialise context object: 2D_NVC0 (0)
[ 21.217] (EE) NOUVEAU(G0): Error initialising acceleration. Falling back to NoAccel
[ 21.217] (**) NOUVEAU(G0): [COPY] acceleration disabled
[ 21.217] (==) NOUVEAU(G0): Backing store enabled
[ 21.217] (==) NOUVEAU(G0): Silken mouse enabled
[ 21.217] (==) NOUVEAU(G0): DPMS enabled
[ 21.217] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.217] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 21.217] (==) intel(0): Backing store enabled
[ 21.217] (==) intel(0): Silken mouse enabled
[ 21.217] (II) intel(0): HW Cursor enabled
[ 21.217] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.217] (==) intel(0): DPMS enabled
[ 21.217] (II) intel(0): [DRI2] Setup complete
[ 21.217] (II) intel(0): [DRI2] DRI driver: i965
[ 21.217] (II) intel(0): [DRI2] VDPAU driver: i965
[ 21.217] (II) intel(0): direct rendering: DRI2 enabled
[ 21.217] (II) intel(0): hardware support for Present enabled
[ 21.217] (==) intel(0): display hotplug detection enabled
[ 21.217] (--) RandR disabled
[ 21.229] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.229] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.229] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.229] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.229] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.229] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.229] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 21.229] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 21.229] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.229] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 21.229] (II) AIGLX: Loaded and initialized i965
[ 21.229] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.230] (II) NOUVEAU(G0): NVEnterVT is called.
[ 21.232] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21.256] (II) intel(0): Setting screen physical size to 508 x 285
[ 21.312] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.312] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.312] (II) LoadModule: "evdev"
[ 21.312] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.312] (II) Module evdev: vendor="X.Org Foundation"
[ 21.312] compiled for 1.16.0, module version = 2.9.0
[ 21.312] Module class: X.Org XInput Driver
[ 21.312] ABI class: X.Org XInput driver, version 21.0
[ 21.312] (II) Using input driver 'evdev' for 'Power Button'
[ 21.312] (**) Power Button: always reports core events
[ 21.312] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.312] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.312] (--) evdev: Power Button: Found keys
[ 21.312] (II) evdev: Power Button: Configuring as keyboard
[ 21.312] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 21.312] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.312] (**) Option "xkb_rules" "evdev"
[ 21.312] (**) Option "xkb_model" "pc104"
[ 21.312] (**) Option "xkb_layout" "us"
[ 21.325] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 21.325] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.325] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.325] (**) Video Bus: always reports core events
[ 21.325] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 21.325] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.325] (--) evdev: Video Bus: Found keys
[ 21.325] (II) evdev: Video Bus: Configuring as keyboard
[ 21.325] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20/event11"
[ 21.325] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.325] (**) Option "xkb_rules" "evdev"
[ 21.325] (**) Option "xkb_model" "pc104"
[ 21.325] (**) Option "xkb_layout" "us"
[ 21.326] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 21.326] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.326] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.326] (**) Video Bus: always reports core events
[ 21.326] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 21.326] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.326] (--) evdev: Video Bus: Found keys
[ 21.326] (II) evdev: Video Bus: Configuring as keyboard
[ 21.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input19/event10"
[ 21.326] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 21.326] (**) Option "xkb_rules" "evdev"
[ 21.326] (**) Option "xkb_model" "pc104"
[ 21.326] (**) Option "xkb_layout" "us"
[ 21.326] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 21.326] (II) No input driver specified, ignoring this device.
[ 21.326] (II) This device may have been added with another device file.
[ 21.326] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.326] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.326] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.326] (**) Sleep Button: always reports core events
[ 21.326] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.326] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.326] (--) evdev: Sleep Button: Found keys
[ 21.326] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 21.326] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.326] (**) Option "xkb_rules" "evdev"
[ 21.326] (**) Option "xkb_model" "pc104"
[ 21.326] (**) Option "xkb_layout" "us"
[ 21.327] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 21.327] (II) No input driver specified, ignoring this device.
[ 21.327] (II) This device may have been added with another device file.
[ 21.327] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 21.327] (II) No input driver specified, ignoring this device.
[ 21.327] (II) This device may have been added with another device file.
[ 21.327] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 21.327] (II) No input driver specified, ignoring this device.
[ 21.327] (II) This device may have been added with another device file.
[ 21.327] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event15)
[ 21.327] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 21.327] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 21.327] (**) ELAN Touchscreen: always reports core events
[ 21.327] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event15"
[ 21.327] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x10c
[ 21.327] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 21.327] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 21.327] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 21.327] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 21.327] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 21.327] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 21.327] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 21.327] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.327] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.000C/input/input31/event15"
[ 21.327] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 21.327] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 21.327] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 21.327] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 21.327] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 21.327] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 21.327] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2)
[ 21.327] (II) No input driver specified, ignoring this device.
[ 21.327] (II) This device may have been added with another device file.
[ 21.328] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event1)
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[ 21.328] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[ 21.328] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event1"
[ 21.328] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[ 21.328] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[ 21.328] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[ 21.328] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[ 21.328] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[ 21.328] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[ 21.328] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[ 21.328] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[ 21.328] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5/event1"
[ 21.328] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 11)
[ 21.328] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[ 21.328] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[ 21.328] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[ 21.328] (II) No input driver specified, ignoring this device.
[ 21.328] (II) This device may have been added with another device file.
[ 21.328] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event16)
[ 21.328] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 21.328] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 21.328] (**) USB2.0 UVC HD Webcam: always reports core events
[ 21.328] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event16"
[ 21.328] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 21.328] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 21.328] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 21.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input26/event16"
[ 21.328] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 12)
[ 21.328] (**) Option "xkb_rules" "evdev"
[ 21.328] (**) Option "xkb_model" "pc104"
[ 21.328] (**) Option "xkb_layout" "us"
[ 21.328] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 21.328] (II) No input driver specified, ignoring this device.
[ 21.328] (II) This device may have been added with another device file.
[ 21.328] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 21.328] (II) No input driver specified, ignoring this device.
[ 21.328] (II) This device may have been added with another device file.
[ 21.329] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 21.329] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.329] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 21.329] (**) Asus WMI hotkeys: always reports core events
[ 21.329] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 21.329] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 21.329] (--) evdev: Asus WMI hotkeys: Found keys
[ 21.329] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 21.329] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event9"
[ 21.329] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 21.329] (**) Option "xkb_rules" "evdev"
[ 21.329] (**) Option "xkb_model" "pc104"
[ 21.329] (**) Option "xkb_layout" "us"
[ 21.329] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.329] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.329] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.329] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.329] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.329] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.329] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.329] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.329] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.329] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 21.329] (**) Option "xkb_rules" "evdev"
[ 21.329] (**) Option "xkb_model" "pc104"
[ 21.329] (**) Option "xkb_layout" "us"
[ 21.329] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[ 21.329] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 21.329] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 21.329] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 21.329] (II) LoadModule: "synaptics"
[ 21.329] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 21.329] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.329] compiled for 1.16.0, module version = 1.8.1
[ 21.329] Module class: X.Org XInput Driver
[ 21.329] ABI class: X.Org XInput driver, version 21.0
[ 21.329] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 21.329] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.329] (**) Option "Device" "/dev/input/event6"
[ 21.450] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33)
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33)
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 21.450] (**) Option "TapButton1" "1"
[ 21.450] (**) Option "TapButton2" "2"
[ 21.450] (**) Option "TapButton3" "3"
[ 21.450] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 21.450] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 21.450] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 21.503] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[ 21.503] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 21.503] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 21.503] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 21.503] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 21.503] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 21.503] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 21.503] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 21.503] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 21.503] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 21.503] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 21.504] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 21.504] (II) No input driver specified, ignoring this device.
[ 21.504] (II) This device may have been added with another device file.
[ 21.505] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2)
[ 21.505] (II) No input driver specified, ignoring this device.
[ 21.505] (II) This device may have been added with another device file.
[ 21.505] (II) config/udev: removing device ELAN Touchscreen
[ 21.556] (II) evdev: ELAN Touchscreen: Close
[ 21.556] (II) UnloadModule: "evdev"
[ 21.557] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event15)
[ 21.557] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 21.557] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 21.557] (**) ELAN Touchscreen: always reports core events
[ 21.557] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event15"
[ 21.557] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x10c
[ 21.557] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 21.557] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 21.557] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 21.557] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 21.557] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 21.557] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 21.557] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 21.557] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.557] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.000C/input/input31/event15"
[ 21.557] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 21.557] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 21.557] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 21.557] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 21.557] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 21.557] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 36.318] (II) intel(0): EDID vendor "LGD", prod id 803
[ 36.318] (II) intel(0): Printing DDC gathered Modelines:
[ 36.318] (II) intel(0): Modeline "1920x1080"x0.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)Xorg.0.log error:
[ 18.338]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 18.339] X Protocol Version 11, Revision 0
[ 18.339] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 18.339] Current Operating System: Linux N550JV 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 18.339] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 18.339] Build Date: 21 September 2014 10:53:13AM
[ 18.339]
[ 18.339] Current version of pixman: 0.32.6
[ 18.339] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.339] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.339] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 4 20:35:19 2014
[ 18.431] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.431] (==) No Layout section. Using the first Screen section.
[ 18.431] (==) No screen section available. Using defaults.
[ 18.431] (**) |-->Screen "Default Screen Section" (0)
[ 18.431] (**) | |-->Monitor "<default monitor>"
[ 18.431] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.432] (==) Automatically adding devices
[ 18.432] (==) Automatically enabling devices
[ 18.432] (==) Automatically adding GPU devices
[ 18.432] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 18.432] Entry deleted from font path.
[ 18.766] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.766] Entry deleted from font path.
[ 18.766] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.773] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.773] Entry deleted from font path.
[ 18.773] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.773] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.773] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.773] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.773] (II) Loader magic: 0x818d80
[ 18.773] (II) Module ABI versions:
[ 18.773] X.Org ANSI C Emulation: 0.4
[ 18.773] X.Org Video Driver: 18.0
[ 18.773] X.Org XInput driver : 21.0
[ 18.773] X.Org Server Extension : 8.0
[ 28.386] (EE) systemd-logind: failed to get session: PID 554 does not belong to any known session
[ 28.386] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 45.268] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 45.268] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 45.268] (--) PCI: (0:1:0:0) 10de:0fe4:1043:11cd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 45.269] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45.269] (II) LoadModule: "glx"
[ 45.284] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45.285] (II) Module glx: vendor="X.Org Foundation"
[ 45.285] compiled for 1.16.1, module version = 1.0.0
[ 45.285] ABI class: X.Org Server Extension, version 8.0
[ 45.285] (==) AIGLX enabled
[ 45.285] (==) Matched intel as autoconfigured driver 0
[ 45.285] (==) Matched nouveau as autoconfigured driver 1
[ 45.285] (==) Matched nvidia as autoconfigured driver 2
[ 45.285] (==) Matched nv as autoconfigured driver 3
[ 45.285] (==) Matched intel as autoconfigured driver 4
[ 45.285] (==) Matched modesetting as autoconfigured driver 5
[ 45.285] (==) Matched fbdev as autoconfigured driver 6
[ 45.285] (==) Matched vesa as autoconfigured driver 7
[ 45.285] (==) Assigned the driver to the xf86ConfigLayout
[ 45.285] (II) LoadModule: "intel"
[ 45.285] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45.286] (II) Module intel: vendor="X.Org Foundation"
[ 45.286] compiled for 1.16.1, module version = 2.99.916
[ 45.286] Module class: X.Org Video Driver
[ 45.286] ABI class: X.Org Video Driver, version 18.0
[ 45.286] (II) LoadModule: "nouveau"
[ 45.286] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 45.286] (II) Module nouveau: vendor="X.Org Foundation"
[ 45.286] compiled for 1.16.1, module version = 1.0.11
[ 45.286] Module class: X.Org Video Driver
[ 45.286] ABI class: X.Org Video Driver, version 18.0
[ 45.286] (II) LoadModule: "nvidia"
[ 45.286] (WW) Warning, couldn't open module nvidia
[ 45.286] (II) UnloadModule: "nvidia"
[ 45.286] (II) Unloading nvidia
[ 45.286] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 45.286] (II) LoadModule: "nv"
[ 45.286] (WW) Warning, couldn't open module nv
[ 45.286] (II) UnloadModule: "nv"
[ 45.286] (II) Unloading nv
[ 45.286] (EE) Failed to load module "nv" (module does not exist, 0)
[ 45.286] (II) LoadModule: "modesetting"
[ 45.286] (WW) Warning, couldn't open module modesetting
[ 45.286] (II) UnloadModule: "modesetting"
[ 45.286] (II) Unloading modesetting
[ 45.286] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 45.286] (II) LoadModule: "fbdev"
[ 45.286] (WW) Warning, couldn't open module fbdev
[ 45.286] (II) UnloadModule: "fbdev"
[ 45.286] (II) Unloading fbdev
[ 45.286] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45.286] (II) LoadModule: "vesa"
[ 45.286] (WW) Warning, couldn't open module vesa
[ 45.286] (II) UnloadModule: "vesa"
[ 45.286] (II) Unloading vesa
[ 45.286] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 45.286] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 45.286] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 45.286] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 45.286] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 45.286] (II) NOUVEAU driver
[ 45.286] (II) NOUVEAU driver for NVIDIA chipset families :
[ 45.286] RIVA TNT (NV04)
[ 45.286] RIVA TNT2 (NV05)
[ 45.286] GeForce 256 (NV10)
[ 45.286] GeForce 2 (NV11, NV15)
[ 45.286] GeForce 4MX (NV17, NV18)
[ 45.286] GeForce 3 (NV20)
[ 45.286] GeForce 4Ti (NV25, NV28)
[ 45.286] GeForce FX (NV3x)
[ 45.286] GeForce 6 (NV4x)
[ 45.286] GeForce 7 (G7x)
[ 45.286] GeForce 8 (G8x)
[ 45.287] GeForce GTX 200 (NVA0)
[ 45.287] GeForce GTX 400 (NVC0)
[ 45.287] (++) using VT number 7
[ 45.290] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 45.290] (II) [drm] nouveau interface version: 1.2.0
[ 45.291] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 45.291] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 45.291] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45.291] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.291] (==) intel(0): RGB weight 888
[ 45.291] (==) intel(0): Default visual is TrueColor
[ 45.291] (II) intel(0): Output eDP1 has no monitor section
[ 45.291] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output eDP1
[ 45.291] (II) intel(0): Enabled output eDP1
[ 45.291] (II) intel(0): Output VGA1 has no monitor section
[ 45.291] (II) intel(0): Enabled output VGA1
[ 45.291] (II) intel(0): Output DP1 has no monitor section
[ 45.291] (II) intel(0): Enabled output DP1
[ 45.291] (II) intel(0): Output HDMI1 has no monitor section
[ 45.291] (II) intel(0): Enabled output HDMI1
[ 45.291] (II) intel(0): Output HDMI2 has no monitor section
[ 45.291] (II) intel(0): Enabled output HDMI2
[ 45.291] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 45.291] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 45.291] (II) intel(0): Enabled output VIRTUAL1
[ 45.291] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 45.291] (==) intel(0): TearFree disabled
[ 45.291] (==) intel(0): DPI set to (96, 96)
[ 45.291] (II) Loading sub module "dri2"
[ 45.291] (II) LoadModule: "dri2"
[ 45.291] (II) Module "dri2" already built-in
[ 45.291] (II) Loading sub module "present"
[ 45.291] (II) LoadModule: "present"
[ 45.291] (II) Module "present" already built-in
[ 45.291] (II) Loading sub module "dri2"
[ 45.291] (II) LoadModule: "dri2"
[ 45.291] (II) Module "dri2" already built-in
[ 45.291] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE7"
[ 45.291] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 45.291] (==) NOUVEAU(G0): RGB weight 888
[ 45.291] (==) NOUVEAU(G0): Default visual is TrueColor
[ 45.291] (==) NOUVEAU(G0): Using HW cursor
[ 45.291] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 45.291] (==) NOUVEAU(G0): Page flipping enabled
[ 45.291] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 45.291] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 45.291] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 45.291] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 45.291] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 45.291] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 45.291] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 45.291] (II) Loading sub module "fb"
[ 45.291] (II) LoadModule: "fb"
[ 45.291] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45.291] (II) Module fb: vendor="X.Org Foundation"
[ 45.291] compiled for 1.16.1, module version = 1.0.0
[ 45.291] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45.291] (II) Loading sub module "shadowfb"
[ 45.291] (II) LoadModule: "shadowfb"
[ 45.291] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 45.291] (II) Module shadowfb: vendor="X.Org Foundation"
[ 45.291] compiled for 1.16.1, module version = 1.0.0
[ 45.291] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45.291] (==) Depth 24 pixmap format is 32 bpp
[ 47.297] (EE) NOUVEAU(G0): Failed to initialise context object: 2D_NVC0 (0)
[ 47.297] (EE) NOUVEAU(G0): Error initialising acceleration. Falling back to NoAccel
[ 47.297] (**) NOUVEAU(G0): [COPY] acceleration disabled
[ 47.297] (==) NOUVEAU(G0): Backing store enabled
[ 47.297] (==) NOUVEAU(G0): Silken mouse enabled
[ 47.297] (==) NOUVEAU(G0): DPMS enabled
[ 47.297] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 47.297] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 47.297] (==) intel(0): Backing store enabled
[ 47.297] (==) intel(0): Silken mouse enabled
[ 47.297] (II) intel(0): HW Cursor enabled
[ 47.297] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 47.297] (==) intel(0): DPMS enabled
[ 47.297] (II) intel(0): [DRI2] Setup complete
[ 47.297] (II) intel(0): [DRI2] DRI driver: i965
[ 47.297] (II) intel(0): [DRI2] VDPAU driver: i965
[ 47.297] (II) intel(0): direct rendering: DRI2 enabled
[ 47.297] (II) intel(0): hardware support for Present enabled
[ 47.343] (==) intel(0): display hotplug detection enabled
[ 47.343] (--) RandR disabled
[ 47.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 47.355] (II) AIGLX: enabled GLX_ARB_create_context
[ 47.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 47.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 47.355] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 47.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 47.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 47.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 47.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 47.355] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 47.356] (II) AIGLX: Loaded and initialized i965
[ 47.356] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 47.357] (II) NOUVEAU(G0): NVEnterVT is called.
[ 47.359] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 47.376] (II) intel(0): Setting screen physical size to 508 x 285
[ 47.440] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 47.440] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.440] (II) LoadModule: "evdev"
[ 47.440] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 47.440] (II) Module evdev: vendor="X.Org Foundation"
[ 47.440] compiled for 1.16.0, module version = 2.9.0
[ 47.440] Module class: X.Org XInput Driver
[ 47.440] ABI class: X.Org XInput driver, version 21.0
[ 47.440] (II) Using input driver 'evdev' for 'Power Button'
[ 47.440] (**) Power Button: always reports core events
[ 47.440] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 47.440] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.441] (--) evdev: Power Button: Found keys
[ 47.441] (II) evdev: Power Button: Configuring as keyboard
[ 47.441] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 47.441] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47.441] (**) Option "xkb_rules" "evdev"
[ 47.441] (**) Option "xkb_model" "pc104"
[ 47.441] (**) Option "xkb_layout" "us"
[ 47.454] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 47.454] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 47.454] (II) Using input driver 'evdev' for 'Video Bus'
[ 47.454] (**) Video Bus: always reports core events
[ 47.454] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 47.454] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 47.454] (--) evdev: Video Bus: Found keys
[ 47.454] (II) evdev: Video Bus: Configuring as keyboard
[ 47.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16/event9"
[ 47.454] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 47.454] (**) Option "xkb_rules" "evdev"
[ 47.454] (**) Option "xkb_model" "pc104"
[ 47.454] (**) Option "xkb_layout" "us"
[ 47.454] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 47.454] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 47.454] (II) Using input driver 'evdev' for 'Video Bus'
[ 47.454] (**) Video Bus: always reports core events
[ 47.454] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 47.454] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 47.454] (--) evdev: Video Bus: Found keys
[ 47.454] (II) evdev: Video Bus: Configuring as keyboard
[ 47.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input15/event8"
[ 47.454] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 47.454] (**) Option "xkb_rules" "evdev"
[ 47.454] (**) Option "xkb_model" "pc104"
[ 47.454] (**) Option "xkb_layout" "us"
[ 47.454] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 47.455] (II) No input driver specified, ignoring this device.
[ 47.455] (II) This device may have been added with another device file.
[ 47.455] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 47.455] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 47.455] (II) Using input driver 'evdev' for 'Sleep Button'
[ 47.455] (**) Sleep Button: always reports core events
[ 47.455] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 47.455] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 47.455] (--) evdev: Sleep Button: Found keys
[ 47.455] (II) evdev: Sleep Button: Configuring as keyboard
[ 47.455] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 47.455] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 47.455] (**) Option "xkb_rules" "evdev"
[ 47.455] (**) Option "xkb_model" "pc104"
[ 47.455] (**) Option "xkb_layout" "us"
[ 47.455] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 47.455] (II) No input driver specified, ignoring this device.
[ 47.455] (II) This device may have been added with another device file.
[ 47.455] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[ 47.455] (II) No input driver specified, ignoring this device.
[ 47.455] (II) This device may have been added with another device file.
[ 47.455] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[ 47.455] (II) No input driver specified, ignoring this device.
[ 47.455] (II) This device may have been added with another device file.
[ 47.455] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event16)
[ 47.455] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 47.455] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 47.455] (**) ELAN Touchscreen: always reports core events
[ 47.455] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event16"
[ 47.456] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x10c
[ 47.456] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 47.456] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 47.456] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 47.456] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 47.456] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 47.456] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 47.456] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 47.456] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:04F3:010C.0014/input/input47/event16"
[ 47.456] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 47.456] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 47.456] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 47.456] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 47.456] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 47.456] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 47.456] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2)
[ 47.456] (II) No input driver specified, ignoring this device.
[ 47.456] (II) This device may have been added with another device file.
[ 47.456] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event1)
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[ 47.456] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[ 47.456] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event1"
[ 47.456] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[ 47.456] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[ 47.456] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[ 47.456] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[ 47.456] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[ 47.456] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[ 47.456] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[ 47.456] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[ 47.456] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5/event1"
[ 47.456] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 11)
[ 47.456] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[ 47.456] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[ 47.456] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[ 47.456] (II) No input driver specified, ignoring this device.
[ 47.456] (II) This device may have been added with another device file.
[ 47.457] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event15)
[ 47.457] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 47.457] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 47.457] (**) USB2.0 UVC HD Webcam: always reports core events
[ 47.457] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event15"
[ 47.457] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 47.457] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 47.457] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 47.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input24/event15"
[ 47.457] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 12)
[ 47.457] (**) Option "xkb_rules" "evdev"
[ 47.457] (**) Option "xkb_model" "pc104"
[ 47.457] (**) Option "xkb_layout" "us"
[ 47.457] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 47.457] (II) No input driver specified, ignoring this device.
[ 47.457] (II) This device may have been added with another device file.
[ 47.457] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 47.457] (II) No input driver specified, ignoring this device.
[ 47.457] (II) This device may have been added with another device file.
[ 47.457] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[ 47.457] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 47.457] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 47.457] (**) Asus WMI hotkeys: always reports core events
[ 47.457] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event6"
[ 47.457] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 47.457] (--) evdev: Asus WMI hotkeys: Found keys
[ 47.457] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 47.457] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input14/event6"
[ 47.457] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 47.457] (**) Option "xkb_rules" "evdev"
[ 47.457] (**) Option "xkb_model" "pc104"
[ 47.457] (**) Option "xkb_layout" "us"
[ 47.457] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 47.457] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47.457] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47.457] (**) AT Translated Set 2 keyboard: always reports core events
[ 47.457] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 47.457] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47.457] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47.457] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47.457] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 47.457] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 47.457] (**) Option "xkb_rules" "evdev"
[ 47.457] (**) Option "xkb_model" "pc104"
[ 47.457] (**) Option "xkb_layout" "us"
[ 47.458] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 47.458] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 47.458] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 47.458] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 47.458] (II) LoadModule: "synaptics"
[ 47.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 47.458] (II) Module synaptics: vendor="X.Org Foundation"
[ 47.458] compiled for 1.16.0, module version = 1.8.1
[ 47.458] Module class: X.Org XInput Driver
[ 47.458] ABI class: X.Org XInput driver, version 21.0
[ 47.458] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 47.458] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 47.458] (**) Option "Device" "/dev/input/event7"
[ 47.570] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33)
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33)
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 47.570] (**) Option "TapButton1" "1"
[ 47.570] (**) Option "TapButton2" "2"
[ 47.570] (**) Option "TapButton3" "3"
[ 47.570] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 47.570] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 47.570] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 47.623] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event7"
[ 47.623] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 47.623] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 47.623] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 47.623] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 47.623] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 47.623] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 47.623] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 47.623] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 47.623] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 47.623] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 47.623] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 47.624] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 47.624] (II) No input driver specified, ignoring this device.
[ 47.624] (II) This device may have been added with another device file.
[ 48.077] (II) UnloadModule: "synaptics"
[ 48.077] (II) evdev: AT Translated Set 2 keyboard: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Asus WMI hotkeys: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: USB2.0 UVC HD Webcam: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: ELAN Touchscreen: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Sleep Button: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Video Bus: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Video Bus: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) evdev: Power Button: Close
[ 48.077] (II) UnloadModule: "evdev"
[ 48.077] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 48.129] (EE) Server terminated successfully (0). Closing log file.P.S. I've noticed that the timeout in X is 3 seconds.
Last edited by Aliverix (2014-11-06 08:43:50)
Offline
I think it is the same problem that prevents my bluetooth device from working randomly at boot.
Offline
I was able to suspend the touchscreen to stop it from connect and disconnect every 2 seconds using this two udev rules:
SUBSYSTEM=="usb", ATTR{idProduct}=="010c", ATTR{idVendor}=="04f3", RUN="/bin/sh -c 'echo auto > /sys$devpath/power/control'"
SUBSYSTEM=="usb", ATTR{idProduct}=="010c", ATTR{idVendor}=="04f3", RUN+="/bin/sh -c 'echo 0 > /sys$devpath/power/autosuspend'"In this way the touchscreen disconnects only three times and then suspends. I'll see if this solves the problem.
Offline
Those two rules suspended correctly the touchscreen, but did not solved anything... The problem is still present...
Offline
I have figured out how to solve part of the problem. It was completely Xorg related, as you can see from the Xorg.0.log. I removed nouveau and installed Nvidia proprietary driver, in this way X doesn't timeout anymore but now I still have a problem with the time it takes X to start up. As you can see from these lines:
[ 20.141] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.141] (II) Loader magic: 0x818d80
[ 20.141] (II) Module ABI versions:
[ 20.141] X.Org ANSI C Emulation: 0.4
[ 20.141] X.Org Video Driver: 18.0
[ 20.141] X.Org XInput driver : 21.0
[ 20.141] X.Org Server Extension : 8.0
[ 44.585] (EE) systemd-logind: failed to get session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[ 44.585] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 44.586] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 44.586] (--) PCI: (0:1:0:0) 10de:0fe4:1043:11cd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 44.586] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 44.586] (II) LoadModule: "glx"There is quite a jump in the timestamps just where an error related with logind occurs. Is it normal or I have a problem? BTW, Xorg doesn't timeout anymore it seems.
Is there anyone who can help me? Maybe I have simply posted in the wrong section of the forum?
Last edited by Aliverix (2014-11-06 22:47:24)
Offline
I have the N550JV and dont have any issues with X starting slow etc.
Offline
Pages: 1