You are not logged in.
- Topics: Active | Unanswered
#1 2014-11-14 17:53:37
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
[solved] Only gibberish after boot on my netbook
Hi all,
I've installed Arch on my netbook (Acer Aspire ES1-11M-C56A) and everything went pretty smoothly until the first boot.
Here is some images of my boot sequence in chronological order:
https://www.dropbox.com/s/z2pgif6pr1327 … 8.jpg?dl=0
https://www.dropbox.com/s/l7lo3f9qymgoa … 4.jpg?dl=0
https://www.dropbox.com/s/eyk6ws374ytz0 … 5.jpg?dl=0
https://www.dropbox.com/s/y5j93qjfts4zf … 1.jpg?dl=0
The last one is the problematic one: It's only gibberish... When I press keys, I do see something happening, I just cant read anything...
Two things I've already tried:
Before I installed Arch onto the netbook, I ran Arch from my USB Stick and it worked fine.
Secondly, since it ran finde from the stick, I checked the kernel boot line via dmesg | grep command after booting from the stick but it looks pretty much the same as the one in GRUB when booting from the netbook itself. It has the options rw and quite. I already tested inserting nomodeset in there, but that didn't help...
Any help highly appriciated.... :-/
Fabian
Last edited by Dunkit (2015-05-01 10:01:34)
Offline
#2 2014-11-14 18:26:27
- Spider.007
- Member
- Registered: 2004-06-20
- Posts: 1,175
Re: [solved] Only gibberish after boot on my netbook
Did you try disabling kms?
Last edited by Spider.007 (2014-11-14 18:26:46)
Offline
#3 2014-11-14 18:28:03
- MoonSwan
- Member
- From: Great White North
- Registered: 2008-01-23
- Posts: 881
Re: [solved] Only gibberish after boot on my netbook
Two things:
1. Di you set the locale correctly when you installed it? If you aren't sure use the usb stick to boot up Arch and then get into your installed Arch through a arch-chroot. Fix the locale issue (it's on the wiki!) and reboot.
2. If 1 isn't an issue at least remove the "quiet" option from the kernel line and see if the boot messages give you anything useful to work with.
Offline
#4 2014-11-14 19:31:56
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
Re: [solved] Only gibberish after boot on my netbook
Thanks for your answers!
I tried adding nomodeset to the kernel boot line, that disables KMS, doesn't it?
Regarding the locale issue: I did what's said in the Beginner's guide: https://wiki.archlinux.org/index.php/beginners'_guide#Locale
I just double-checked it, it's all the way it is supposed to be.
Here's what I've found out: If on the gibberish screen I just type "exit" blindly, it takes a couple of seconds an then takes me to a "normal" login screen, where I can actually read stuff... I can then login as a normal user or as root and everything works perfectly fine. So the issue is not that bad any more, but still a bit crazy. Anything specific I should be looking for?
Offline
#5 2014-11-14 19:37:45
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 12,416
Re: [solved] Only gibberish after boot on my netbook
Do you have autologin set up?
Online
#6 2014-11-14 19:38:41
- MoonSwan
- Member
- From: Great White North
- Registered: 2008-01-23
- Posts: 881
Re: [solved] Only gibberish after boot on my netbook
Yes nomodeset disables KMS but that is only relevant if you use an Intel video card (I think). Let's step back a bit and give us some more information.
What is your system running, e.g. videocard and the drivers you're using to get a display at all. Are there any error messages when you boot up (this is why I suggested removing the "quiet" parameter) but you can also look at dmesg with "dmesg|less". If there are errors please post the whole log for that boot session.
Anything at all in journalctl -xn? If yes, please post the entire log of that session.
Any other issues that might point to where the problem lies?
Offline
#7 2014-11-14 19:38:47
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
Re: [solved] Only gibberish after boot on my netbook
No, at least not intentionally...
Offline
#8 2014-11-14 19:47:49
- MoonSwan
- Member
- From: Great White North
- Registered: 2008-01-23
- Posts: 881
Re: [solved] Only gibberish after boot on my netbook
Dunkit wrote:
No, at least not intentionally...
I realise that but could you please answer Scimmia and my questions? We can't help if you don't help yourself.
Offline
#9 2014-11-14 19:50:24
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
Re: [solved] Only gibberish after boot on my netbook
Sorry, I already posted my last answer before I read your post...
I do have an intel video chip ( it's onboard I suppose, lspci says 'VGA compatible Controller: Intel Corporation Atom PRocessor Z36xxx/Z37xxx Series Graphics & Display) and I installed the xf86-video-intel for that.
dmesg only shows some errors that seem to be related to the fact that I'm using eMMc storage:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000781aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000781af000-0x00000000787aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000787af000-0x00000000788aefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000788af000-0x00000000788eefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000788ef000-0x00000000794c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire ES1-111M/R2, BIOS V1.03 07/22/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
[ 0.000000] [mem 0x79e00000-0x79ffffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x781aefff]
[ 0.000000] [mem 0x78000000-0x781aefff] page 4k
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x788ef000-0x794c5fff]
[ 0.000000] [mem 0x788ef000-0x789fffff] page 4k
[ 0.000000] [mem 0x78a00000-0x793fffff] page 2M
[ 0.000000] [mem 0x79400000-0x794c5fff] page 4k
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79dc6000-0x79dfffff]
[ 0.000000] [mem 0x79dc6000-0x79dfffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
[ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379c2000-0x37cd8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000788EE120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000788EB000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: DSDT 0x00000000788DD000 008EEF (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000078878000 000040
[ 0.000000] ACPI: UEFI 0x00000000788ED000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x00000000788EC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x00000000788EA000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: LPIT 0x00000000788E9000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: APIC 0x00000000788E8000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: MCFG 0x00000000788E7000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788E6000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788DB000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788DA000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D9000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D8000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: UEFI 0x00000000788D7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D3000 00305B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: CSRT 0x00000000788D2000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D1000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: FPDT 0x00000000788D0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
[ 0.000000] NODE_DATA [mem 0x79ff8000-0x79ffbfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076000000-ffff880077ffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1effffff]
[ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x781aefff]
[ 0.000000] node 0: [mem 0x788ef000-0x794c5fff]
[ 0.000000] node 0: [mem 0x79dc6000-0x79ffffff]
[ 0.000000] On node 0 totalpages: 494941
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7744 pages used for memmap
[ 0.000000] DMA32 zone: 490944 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x781af000-0x787aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x787af000-0x788aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x788af000-0x788eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x794c6000-0x79dc5fff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079200000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 487112
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1931524K/1979764K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 48240K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 2163200 KHz
[ 0.000000] lapic_timer_frequency = 277333
[ 0.000000] tsc: Detected 2163.200 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20140724
[ 0.020950] ACPI: All ACPI Tables successfully acquired
[ 0.037502] Security Framework initialized
[ 0.037510] Yama: becoming mindful.
[ 0.037738] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.038621] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.039038] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.039048] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.039370] Initializing cgroup subsys memory
[ 0.039383] Initializing cgroup subsys devices
[ 0.039390] Initializing cgroup subsys freezer
[ 0.039395] Initializing cgroup subsys net_cls
[ 0.039400] Initializing cgroup subsys blkio
[ 0.039426] CPU: Physical Processor ID: 0
[ 0.039429] CPU: Processor Core ID: 0
[ 0.039435] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.044212] mce: CPU supports 6 MCE banks
[ 0.044222] CPU0: Thermal monitoring handled by SMI
[ 0.044231] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.044350] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.045336] ftrace: allocating 20675 entries in 81 pages
[ 0.056669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089653] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[ 0.089679] TSC deadline timer enabled
[ 0.089713] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.089728] ... version: 3
[ 0.089730] ... bit width: 40
[ 0.089732] ... generic registers: 2
[ 0.089734] ... value mask: 000000ffffffffff
[ 0.089737] ... max period: 000000ffffffffff
[ 0.089738] ... fixed-purpose events: 3
[ 0.089740] ... event mask: 0000000700000003
[ 0.109818] x86: Booting SMP configuration:
[ 0.109824] .... node #0, CPUs: #1
[ 0.125602] CPU1: Thermal monitoring handled by SMI
[ 0.127775] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.127798] x86: Booted up 1 node, 2 CPUs
[ 0.127802] smpboot: Total of 2 processors activated (8656.33 BogoMIPS)
[ 0.128380] devtmpfs: initialized
[ 0.134353] PM: Registering ACPI NVS region [mem 0x787af000-0x788aefff] (1048576 bytes)
[ 0.134382] PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes)
[ 0.136401] pinctrl core: initialized pinctrl subsystem
[ 0.136470] RTC time: 20:38:52, date: 11/14/14
[ 0.136681] NET: Registered protocol family 16
[ 0.136908] cpuidle: using governor ladder
[ 0.136913] cpuidle: using governor menu
[ 0.136962] ACPI: bus type PCI registered
[ 0.136966] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.137094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.137099] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.137280] PCI: Using configuration type 1 for base access
[ 0.148365] ACPI: Added _OSI(Module Device)
[ 0.148371] ACPI: Added _OSI(Processor Device)
[ 0.148373] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.148376] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.182017] ACPI: Dynamic OEM Table Load:
[ 0.182033] ACPI: SSDT 0xFFFF88007566F000 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.182998] ACPI: Dynamic OEM Table Load:
[ 0.183012] ACPI: SSDT 0xFFFF88007566F800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.191456] ACPI: Dynamic OEM Table Load:
[ 0.191469] ACPI: SSDT 0xFFFF88007523E600 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.201158] ACPI: Dynamic OEM Table Load:
[ 0.201171] ACPI: SSDT 0xFFFF880075065D80 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.221110] ACPI: Interpreter enabled
[ 0.221122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.221131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.221159] ACPI: (supports S0 S3 S4 S5)
[ 0.221162] ACPI: Using IOAPIC for interrupt routing
[ 0.221223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.224878] ACPI: Power Resource [USBC] (on)
[ 0.235979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.235991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.236183] \_SB_.PCI0:_OSC invalid UUID
[ 0.236186] _OSC request data:1 1f 0
[ 0.236194] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.236642] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.236942] PCI host bridge to bus 0000:00
[ 0.236949] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.236953] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.236957] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.236960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.236964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.236968] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.236971] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.236975] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
[ 0.236987] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.237145] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.237161] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.237174] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.237185] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
[ 0.237352] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
[ 0.237372] pci 0000:00:12.0: reg 0x10: [mem 0x90920000-0x90920fff]
[ 0.237384] pci 0000:00:12.0: reg 0x14: [mem 0x9091f000-0x9091ffff]
[ 0.237451] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 0.237582] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.237604] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
[ 0.237664] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.237767] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.237842] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
[ 0.237862] pci 0000:00:17.0: reg 0x10: [mem 0x9091d000-0x9091dfff]
[ 0.237874] pci 0000:00:17.0: reg 0x14: [mem 0x9091c000-0x9091cfff]
[ 0.237941] pci 0000:00:17.0: PME# supported from D0 D3hot
[ 0.238080] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.238109] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
[ 0.238125] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
[ 0.238234] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.238369] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.238395] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
[ 0.238467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238595] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.238661] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238730] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.238805] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.238869] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.238938] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.239009] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.239073] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.239142] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.239220] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.239413] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.239450] pci 0000:00:1f.3: reg 0x10: [mem 0x90918000-0x9091801f]
[ 0.239523] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
[ 0.239806] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.239939] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[ 0.239969] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
[ 0.240106] pci 0000:02:00.0: supports D1 D2
[ 0.240109] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.240155] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.244425] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.244433] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.244537] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.244559] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.244589] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
[ 0.244609] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
[ 0.244701] pci 0000:03:00.0: supports D1 D2
[ 0.244704] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244753] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.251067] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.251073] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.251079] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.251085] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.251926] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.252051] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252630] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.255427] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.255679] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.255890] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.255894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.255900] vgaarb: loaded
[ 0.255902] vgaarb: bridge control possible 0000:00:02.0
[ 0.255981] PCI: Using ACPI for IRQ routing
[ 0.257377] PCI: pci_cache_line_size set to 64 bytes
[ 0.257448] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.257451] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 0.257454] e820: reserve RAM buffer [mem 0x781af000-0x7bffffff]
[ 0.257457] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff]
[ 0.257460] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.257646] NetLabel: Initializing
[ 0.257649] NetLabel: domain hash size = 128
[ 0.257651] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.257674] NetLabel: unlabeled traffic allowed by default
[ 0.257740] Switched to clocksource refined-jiffies
[ 0.266257] pnp: PnP ACPI init
[ 0.266368] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.266512] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.266518] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.266522] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.266526] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.266531] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.266537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266663] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.267177] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.267183] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.267187] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.267191] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.267196] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
[ 0.267200] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.267204] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.267208] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.267213] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.267218] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268674] pnp: PnP ACPI: found 4 devices
[ 0.277065] Switched to clocksource acpi_pm
[ 0.277091] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.277097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.277102] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.277111] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.277116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.277135] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.277139] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.277144] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.277148] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.277151] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.277162] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.277166] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.277176] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277180] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277189] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277193] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277200] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.277205] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.277217] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277221] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277227] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.277231] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.277240] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277244] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277248] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.277252] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.277264] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.277268] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.277274] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.277283] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.277287] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.277293] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.277298] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.277306] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.277309] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.277313] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.277316] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.277320] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.277323] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.277327] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
[ 0.277331] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.277335] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.277338] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
[ 0.277342] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.277345] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[ 0.277349] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[ 0.277394] NET: Registered protocol family 2
[ 0.277708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.277807] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.277882] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.277930] TCP: reno registered
[ 0.277940] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.277962] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.278050] NET: Registered protocol family 1
[ 0.278077] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.278420] PCI: CLS 64 bytes, default 64
[ 0.278507] Unpacking initramfs...
[ 0.363030] Freeing initrd memory: 3164K (ffff8800379c2000 - ffff880037cd9000)
[ 0.363325] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x824
[ 0.363342] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x824
[ 0.363454] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.363501] Scanning for low memory corruption every 60 seconds
[ 0.364076] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.364106] Initialise system trusted keyring
[ 0.364623] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.367286] zpool: loaded
[ 0.367291] zbud: loaded
[ 0.367570] VFS: Disk quotas dquot_6.5.2
[ 0.367637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.367884] msgmni has been set to 3778
[ 0.367982] Key type big_key registered
[ 0.368394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.368491] io scheduler noop registered
[ 0.368496] io scheduler deadline registered
[ 0.368553] io scheduler cfq registered (default)
[ 0.369157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.369189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.369267] efifb: probing for efifb
[ 0.369275] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[ 0.369278] efifb: mode is 640x480x1, linelength=80, pages=1
[ 0.369280] efifb: scrolling: redraw
[ 0.369283] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.371834] Console: switching to colour frame buffer device 80x30
[ 0.374216] fb0: EFI VGA frame buffer device
[ 0.374232] intel_idle: MWAIT substates: 0x33000020
[ 0.374235] intel_idle: v0.4 model 0x37
[ 0.374238] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.374460] GHES: HEST is not enabled!
[ 0.374613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.395990] hpet: number irqs doesn't agree with number of timers
[ 0.396024] Linux agpgart interface v0.103
[ 0.396109] rtc_cmos 00:00: RTC can wake from S4
[ 0.396382] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.396413] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 0.396432] Intel P-state driver initializing.
[ 0.396709] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.397338] TCP: cubic registered
[ 0.398118] NET: Registered protocol family 10
[ 0.399444] NET: Registered protocol family 17
[ 0.401489] Loading compiled-in X.509 certificates
[ 0.401523] registered taskstats version 1
[ 0.402998] Magic number: 6:785:649
[ 0.403061] acpi LNXCPU:02: hash matches
[ 0.403367] rtc_cmos 00:00: setting system clock to 2014-11-14 20:38:52 UTC (1415997532)
[ 0.404025] PM: Hibernation image not present or could not be loaded.
[ 0.407661] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.407671] Write protecting the kernel read-only data: 8192k
[ 0.415930] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.419109] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.434439] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.464489] sdhci: Secure Digital Host Controller Interface driver
[ 0.464494] sdhci: Copyright(c) Pierre Ossman
[ 0.471477] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.471481] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.471995] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.480290] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev e)
[ 0.481461] sdhci-pci 0000:00:12.0: No vmmc regulator found
[ 0.481466] sdhci-pci 0000:00:12.0: No vqmmc regulator found
[ 0.483289] ACPI: bus type USB registered
[ 0.483335] usbcore: registered new interface driver usbfs
[ 0.483355] usbcore: registered new interface driver hub
[ 0.483418] usbcore: registered new device driver usb
[ 0.485860] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
[ 0.485891] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev e)
[ 0.487077] sdhci-pci 0000:00:17.0: No vmmc regulator found
[ 0.487080] sdhci-pci 0000:00:17.0: No vqmmc regulator found
[ 0.488267] mmc1: SDHCI controller on PCI [0000:00:17.0] using ADMA
[ 0.500911] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.500924] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.501319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.501349] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
[ 0.501680] hub 1-0:1.0: USB hub found
[ 0.501699] hub 1-0:1.0: 6 ports detected
[ 0.502403] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.502411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.502682] hub 2-0:1.0: USB hub found
[ 0.502697] hub 2-0:1.0: 1 port detected
[ 0.536044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.682960] mmc1: BKOPS_EN bit is not set
[ 0.753714] mmc1: new HS200 MMC card at address 0001
[ 0.757972] mmcblk0: mmc1:0001 HBG4e 29.1 GiB
[ 0.758296] mmcblk0boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
[ 0.758656] mmcblk0boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
[ 0.759001] mmcblk0rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB
[ 0.760381] mmcblk0: p1
[ 0.769458] mmcblk0boot1: unknown partition table
[ 0.776772] mmcblk0boot0: unknown partition table
[ 0.861284] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.039303] hub 1-2:1.0: USB hub found
[ 1.039605] hub 1-2:1.0: 4 ports detected
[ 1.040760] usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
[ 1.040784] usb 1-2-port1: failed to peer to usb2-port1 (-16)
[ 1.040793] usb: port power management may be unreliable
[ 1.041303] usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
[ 1.041322] usb 1-2-port2: failed to peer to usb2-port1 (-16)
[ 1.041742] usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
[ 1.041761] usb 1-2-port3: failed to peer to usb2-port1 (-16)
[ 1.042168] usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
[ 1.042186] usb 1-2-port4: failed to peer to usb2-port1 (-16)
[ 1.204964] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.365057] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[ 1.458942] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[ 2.365981] Switched to clocksource tsc
[ 9.024844] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 9.027472] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 9.028069] mmcblk0rpmb: retrying using single block read
[ 9.030203] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.032796] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.035371] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.037958] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.040486] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.043040] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.043462] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 9.043805] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 17.277306] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 17.279940] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 17.293029] mmcblk0rpmb: retrying using single block read
[ 17.295226] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.323127] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.351243] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.379502] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.407857] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.436111] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.462187] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 17.475265] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 17.568142] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
[ 17.922112] random: nonblocking pool is initialized
[ 45.820995] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted
[ 45.821014] EXT4-fs (mmcblk0p1): recovery complete
[ 45.839454] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 46.315355] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 46.454989] systemd-journald[128]: File /var/log/journal/c1ea0510636b4ead93870d2114f006f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 46.469206] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
[ 46.543132] systemd-journald[128]: Received request to flush runtime journal from PID 1
[ 46.757953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 46.759247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 46.759257] ACPI: Power Button [PWRB]
[ 46.759346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 46.759350] ACPI: Sleep Button [SLPB]
[ 46.759441] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 46.759490] ACPI: Lid Switch [LID]
[ 46.759576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 46.759580] ACPI: Power Button [PWRF]
[ 46.785055] mei_txe 0000:00:1a.0: irq 88 for MSI/MSI-X
[ 46.832919] ACPI: AC Adapter [ACAD] (on-line)
[ 46.845651] wmi: Mapper loaded
[ 46.852089] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 46.878734] snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
[ 46.879800] hidraw: raw HID events driver (C) Jiri Kosina
[ 46.879829] [drm] Initialized drm 1.1.0 20060810
[ 46.888955] ACPI: Battery Slot [BAT1] (battery present)
[ 46.910854] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 46.910865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.914888] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
[ 46.914912] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
[ 46.914930] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
[ 46.915040] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
[ 46.915081] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
[ 46.921669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 46.921694] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 46.929220] r8169 0000:03:00.0: irq 90 for MSI/MSI-X
[ 46.929504] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000356000, c4:54:44:c3:00:9c, XID 0c000800 IRQ 90
[ 46.929508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 46.929921] thermal LNXTHERM:00: registered as thermal_zone1
[ 46.929925] ACPI: Thermal Zone [TZ01] (42 C)
[ 46.937929] bcma: bus0: Bus registered
[ 46.944450] [drm] Memory usable by graphics device = 2048M
[ 46.944457] [drm] Replacing VGA console driver
[ 46.944463] checking generic (a0000 10000) vs hw (80000000 10000000)
[ 46.944465] fb: switching to inteldrmfb from EFI VGA
[ 46.944514] Console: switching to colour dummy device 80x25
[ 46.946311] i915 0000:00:02.0: irq 91 for MSI/MSI-X
[ 46.946327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 46.946330] [drm] Driver supports precise vblank timestamp query.
[ 47.025611] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 47.066033] [drm] VBT doesn't support DRRS
[ 47.195396] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 47.211039] fbcon: inteldrmfb (fb0) is primary device
[ 48.893803] Console: switching to colour frame buffer device 170x48
[ 48.922732] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 48.922746] i915 0000:00:02.0: registered panic notifier
[ 48.968459] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 48.968951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 48.969149] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 55.143879] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 55.146515] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 55.146934] mmcblk0rpmb: retrying using single block read
[ 55.149180] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.151614] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.154086] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.156560] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.159039] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.161459] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.161802] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 55.162057] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 63.388980] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 63.391496] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 63.391966] mmcblk0rpmb: retrying using single block read
[ 63.394102] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.396574] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.399050] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.401468] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.403913] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.406388] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.406700] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 63.406951] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 63.423775] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 63.529519] media: Linux media interface: v0.10
[ 63.580182] Linux video capture interface: v2.00
[ 63.608499] Bluetooth: Core ver 2.19
[ 63.608788] NET: Registered protocol family 31
[ 63.608794] Bluetooth: HCI device and connection manager initialized
[ 63.608807] Bluetooth: HCI socket layer initialized
[ 63.608815] Bluetooth: L2CAP socket layer initialized
[ 63.608833] Bluetooth: SCO socket layer initialized
[ 63.642483] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
[ 63.650153] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
[ 63.650314] usbcore: registered new interface driver uvcvideo
[ 63.650318] USB Video Class driver (1.1.1)
[ 63.665373] intel_rapl: Found RAPL domain package
[ 63.665379] intel_rapl: Found RAPL domain core
[ 63.688550] iTCO_vendor_support: vendor-support=0
[ 63.701582] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 63.701652] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 63.701827] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 63.739578] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 63.739584] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 63.739588] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 63.739590] sound hdaudioC0D0: mono: mono_out=0x0
[ 63.739593] sound hdaudioC0D0: inputs:
[ 63.739596] sound hdaudioC0D0: Mic=0x12
[ 63.807591] usbcore: registered new interface driver btusb
[ 63.809964] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 63.859693] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 63.859712] acer_wmi: Function bitmap for Communication Button: 0x801
[ 63.859861] acer_wmi: Brightness must be controlled by acpi video driver
[ 63.871050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 63.873001] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 63.875263] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 63.875363] input: Acer WMI hotkeys as /devices/virtual/input/input10
[ 63.879763] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[ 63.896357] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.904021] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.904883] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.905761] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.906614] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.906794] input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input12
[ 63.907001] hid-multitouch 0018:06CB:2991.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
[ 63.967191] mousedev: PS/2 mouse device common for all mice
[ 64.026205] cfg80211: Calling CRDA to update world regulatory domain
[ 64.458411] r8169 0000:03:00.0 enp3s0: link down
[ 64.458485] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 64.458497] r8169 0000:03:00.0 enp3s0: link down
[ 65.817131] Bluetooth: hci0 command 0x1003 tx timeout
[ 66.041823] r8169 0000:03:00.0 enp3s0: link up
[ 66.041860] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes readyjournalctl -xn gives:
-- Logs begin at Fr 2014-11-14 20:35:40 CET, end at Fr 2014-11-14 21:40:11 CET. --
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Timers.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Sockets.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Sockets.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Basic System.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Basic System.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Default.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Default.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Startup finished in 29ms.
-- Subject: System start-up is now complete
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- All system services necessary queued for starting at boot have been
-- successfully started. Note that this does not mean that the machine is
-- now idle as services might still be busy with completing start-up.
--
-- Kernel start-up required KERNEL_USEC microseconds.
--
-- Initial RAM disk start-up required INITRD_USEC microseconds.
--
-- Userspace start-up required 29200 microseconds.
Nov 14 21:40:08 weierstrass login[179]: ROOT LOGIN ON tty1
Nov 14 21:40:11 weierstrass dhcpcd[301]: enp3s0: no IPv6 Routers available... which looks pretty fine to me...
No, no other issues so far.
How could I find out if some autologin is set up?
Offline
#10 2014-11-14 22:24:23
- MoonSwan
- Member
- From: Great White North
- Registered: 2008-01-23
- Posts: 881
Re: [solved] Only gibberish after boot on my netbook
Sorry if my last post sounded snippy. I was hoping you weren't a poster who just expects help from others to "magically" fix their system without doing anything their self. Happily, you aren't one of those people. 
Your logs do (unfortunately?) look normal.
There are only a few ways to enable auto-login but usually most people who run a DE use something like KDM or GDM or Slim if they're using a WM such as OpenBox. They by-pass the login screen you normally see when your computer finishes booting but before your DE/WM is started up. If you're asking how to do that I'm inclined to think you're booting to a blank console with a "login:" prompt, correct? Then you use startx or something to get to X and your preferred GUI setup.
Offline
#11 2014-11-15 10:26:18
- Spider.007
- Member
- Registered: 2004-06-20
- Posts: 1,175
Re: [solved] Only gibberish after boot on my netbook
The amount of errors from mmcblk0rpmb is pretty significant; it's impossible to rule out the corruption from that storage device doesn't cause the sort of corruption you're seeing. Do you have other storage available that is less corrupted? You might check if maybe something important got corrupted by running:
pacman -Qkk 2>&1|grep 'Size mismatch'|grep -v /etcI also noticed you setup a german locale; while this is obviously fine it would be interesting to see if the same happens when you configure `en_US.UTF8` as locale. What is in your /etc/vconsole.conf btw?
Last edited by Spider.007 (2014-11-15 10:33:38)
Offline
#12 2014-11-16 23:27:56
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
Re: [solved] Only gibberish after boot on my netbook
Sorry for not getting back to you earlier, had a weekend on the road...
MoonSwan, yeah I'm booting into a plain console....
Spider, I've seen those errors but really didnt put too much attention to them. My netbook (which I only got on friday by the way, so the corrupted memory is even more mysterious...) only has the eMMc storage popping up in those error messages.
Your command (I adjusted it to the german output of pacman -Qkk I am getting...) put out a couple of lines, which seem to be related to some Arch and GRUB stuff, so this might actually be a step in the right direction:
Warnung: grub: /boot/grub/grub.cfg (Größen stimmen nicht überein)
Warnung: linux: /usr/lib/modules/3.17.2-1-ARCH/modules.alias (Größen stimmen nicht überein)
Warnung: linux: /usr/lib/modules/3.17.2-1-ARCH/modules.alias.bin (Größen stimmen nicht überein)
Warnung: linux: /usr/lib/modules/3.17.2-1-ARCH/modules.dep (Größen stimmen nicht überein)
Warnung: linux: /usr/lib/modules/3.17.2-1-ARCH/modules.dep.bin (Größen stimmen nicht überein)
Warnung: xterm: /usr/share/X11/app-defaults/XTerm-color (Größen stimmen nicht überein)
"(Größen stimmen nicht überein)" means "Sizes do not match", so I'm assuming this is the german version of "Size mismatch".
But what does that actually mean?
My /etc/vconsole.conf is set up following the Beginner's Guide:
KEYMAP=de-latin1
FONT=lat9w-16
I will change the locale to english and reboot after submitting this post and will edit it with the result...
EDIT: Changing locale to UUS doesn't help...
EDIT 2 (2014-11-17) : Just discovered something new: When I see the gibberish, I can type 'exit' to get to a normal login, like I said. On my last boot, I typed 'exit' a little earlier and saw an error message like
"Could not find root device UUID={some long hex(?) number}
You are being kicked out of recovery shell"
and after that a couple of lines saying
[OK] ....
So maybe all this has indeed something todo with the corrupted mmcblk0rmpb?! By the way: Arch is installed on a partition called mmcblk0p1....
Last edited by Dunkit (2014-11-17 10:01:44)
Offline
#13 2015-05-01 10:00:20
- Dunkit
- Member
- Registered: 2014-11-14
- Posts: 20
Re: [solved] Only gibberish after boot on my netbook
Resolved the problem today:
For some reason I was booted in recovery shell (like I said in my last update to my previous post), but with gibberish writing so that was hard to recognize and even harder to work with.
I'll spare you the details but two things fixed this step by step:
1) in /etc/default/grub set the GRUB_GFXPAYLOAD_LINUX option to "text" instead of "keep". That way, the gibberish should turn into readable text.
2) The reason why I was booted into recovery shell is gone with kernel 4.0.1 for me.
Cheers.
Offline