You are not logged in.
- Topics: Active | Unanswered
#1 2014-12-02 23:57:17
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
KDE works fine, Gnome crashes.
I just completed a clean install today. I installed gnome shell and gdm. After reboot gnome crashed with a message saying Ooops something went wrong. I removed all gnome related packages and installed Kde and it works fine.. Has anyone else experienced something like this? What could it be that crashes gnome?
Offline
#2 2014-12-03 10:52:42
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 15,558
Re: KDE works fine, Gnome crashes.
Ooops something went wrong.
That message can have many reasons, but often it's videodriver related.
You'll need a full dmesg & xorg.log from starting gnome if you want to investigate further.
Last edited by Lone_Wolf (2014-12-03 10:53:00)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#3 2014-12-03 12:54:54
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
Re: KDE works fine, Gnome crashes.
Of course, you are right.
Here is the Xor.log
[ 11.644]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 11.644] X Protocol Version 11, Revision 0
[ 11.644] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 11.644] Current Operating System: Linux morpheus 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 x86_64
[ 11.644] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d2c1bd7e-e6c8-4cb2-bee9-f0d2d7863d43 rw ipv6.disable=1
[ 11.645] Build Date: 10 November 2014 07:52:13PM
[ 11.645]
[ 11.645] Current version of pixman: 0.32.6
[ 11.645] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.645] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 3 14:24:07 2014
[ 11.700] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.731] (==) No Layout section. Using the first Screen section.
[ 11.731] (==) No screen section available. Using defaults.
[ 11.731] (**) |-->Screen "Default Screen Section" (0)
[ 11.731] (**) | |-->Monitor "<default monitor>"
[ 11.741] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.741] (==) Automatically adding devices
[ 11.741] (==) Automatically enabling devices
[ 11.741] (==) Automatically adding GPU devices
[ 11.805] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.805] Entry deleted from font path.
[ 11.805] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.805] Entry deleted from font path.
[ 11.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.805] Entry deleted from font path.
[ 11.805] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.805] Entry deleted from font path.
[ 11.805] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.805] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 11.805] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.805] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.805] (II) Loader magic: 0x818d80
[ 11.805] (II) Module ABI versions:
[ 11.805] X.Org ANSI C Emulation: 0.4
[ 11.805] X.Org Video Driver: 18.0
[ 11.805] X.Org XInput driver : 21.0
[ 11.805] X.Org Server Extension : 8.0
[ 11.807] (EE) systemd-logind: failed to get session: PID 315 does not belong to any known session
[ 11.807] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.807] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.809] (--) PCI:*(0:0:2:0) 8086:0166:1028:0565 rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 11.809] (--) PCI: (0:1:0:0) 10de:1140:1028:0565 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.809] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.810] (II) LoadModule: "glx"
[ 11.823] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.075] compiled for 4.0.2, module version = 1.0.0
[ 13.075] Module class: X.Org Server Extension
[ 13.087] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 13.098] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 13.098] loading driver: nvidia
[ 13.098] (==) Matched intel as autoconfigured driver 0
[ 13.098] (==) Matched nvidia as autoconfigured driver 1
[ 13.098] (==) Matched nouveau as autoconfigured driver 2
[ 13.098] (==) Matched nvidia as autoconfigured driver 3
[ 13.098] (==) Matched nv as autoconfigured driver 4
[ 13.098] (==) Matched intel as autoconfigured driver 5
[ 13.098] (==) Matched modesetting as autoconfigured driver 6
[ 13.098] (==) Matched fbdev as autoconfigured driver 7
[ 13.098] (==) Matched vesa as autoconfigured driver 8
[ 13.099] (==) Assigned the driver to the xf86ConfigLayout
[ 13.099] (II) LoadModule: "intel"
[ 13.099] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.167] (II) Module intel: vendor="X.Org Foundation"
[ 13.167] compiled for 1.16.1, module version = 2.99.916
[ 13.167] Module class: X.Org Video Driver
[ 13.167] ABI class: X.Org Video Driver, version 18.0
[ 13.167] (II) LoadModule: "nvidia"
[ 13.167] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.284] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.284] compiled for 4.0.2, module version = 1.0.0
[ 13.284] Module class: X.Org Video Driver
[ 13.294] (II) LoadModule: "nouveau"
[ 13.310] (WW) Warning, couldn't open module nouveau
[ 13.310] (II) UnloadModule: "nouveau"
[ 13.310] (II) Unloading nouveau
[ 13.310] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 13.310] (II) LoadModule: "nv"
[ 13.310] (WW) Warning, couldn't open module nv
[ 13.310] (II) UnloadModule: "nv"
[ 13.310] (II) Unloading nv
[ 13.310] (EE) Failed to load module "nv" (module does not exist, 0)
[ 13.310] (II) LoadModule: "modesetting"
[ 13.310] (WW) Warning, couldn't open module modesetting
[ 13.310] (II) UnloadModule: "modesetting"
[ 13.310] (II) Unloading modesetting
[ 13.310] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 13.310] (II) LoadModule: "fbdev"
[ 13.311] (WW) Warning, couldn't open module fbdev
[ 13.311] (II) UnloadModule: "fbdev"
[ 13.311] (II) Unloading fbdev
[ 13.311] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13.311] (II) LoadModule: "vesa"
[ 13.311] (WW) Warning, couldn't open module vesa
[ 13.311] (II) UnloadModule: "vesa"
[ 13.311] (II) Unloading vesa
[ 13.311] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13.311] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13.311] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 13.312] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 13.312] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 13.312] (II) NVIDIA dlloader X Driver 343.22 Thu Sep 11 15:34:47 PDT 2014
[ 13.312] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.326] (++) using VT number 7
[ 13.339] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 13.359] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 13.359] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 13.359] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.360] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.360] (==) intel(0): RGB weight 888
[ 13.360] (==) intel(0): Default visual is TrueColor
[ 13.360] (II) intel(0): Output LVDS1 has no monitor section
[ 13.360] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 13.360] (II) intel(0): Enabled output LVDS1
[ 13.360] (II) intel(0): Output VGA1 has no monitor section
[ 13.360] (II) intel(0): Enabled output VGA1
[ 13.360] (II) intel(0): Output HDMI1 has no monitor section
[ 13.360] (II) intel(0): Enabled output HDMI1
[ 13.360] (II) intel(0): Output DP1 has no monitor section
[ 13.360] (II) intel(0): Enabled output DP1
[ 13.360] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.360] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.360] (II) intel(0): Enabled output VIRTUAL1
[ 13.360] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 13.361] (==) intel(0): TearFree disabled
[ 13.361] (==) intel(0): DPI set to (96, 96)
[ 13.361] (II) Loading sub module "dri2"
[ 13.361] (II) LoadModule: "dri2"
[ 13.361] (II) Module "dri2" already built-in
[ 13.361] (II) Loading sub module "present"
[ 13.361] (II) LoadModule: "present"
[ 13.361] (II) Module "present" already built-in
[ 13.361] (II) UnloadModule: "nvidia"
[ 13.361] (II) Unloading nvidia
[ 13.361] (==) Depth 24 pixmap format is 32 bpp
[ 13.406] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 13.406] (==) intel(0): Backing store enabled
[ 13.406] (==) intel(0): Silken mouse enabled
[ 13.423] (II) intel(0): HW Cursor enabled
[ 13.423] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.424] (==) intel(0): DPMS enabled
[ 13.424] (II) intel(0): [DRI2] Setup complete
[ 13.424] (II) intel(0): [DRI2] DRI driver: i965
[ 13.424] (II) intel(0): [DRI2] VDPAU driver: i965
[ 13.424] (II) intel(0): direct rendering: DRI2 enabled
[ 13.424] (II) intel(0): hardware support for Present enabled
[ 13.425] (==) intel(0): display hotplug detection enabled
[ 13.425] (--) RandR disabled
[ 13.449] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 13.473] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13.480] (II) intel(0): Setting screen physical size to 423 x 238
[ 13.829] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 13.829] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.829] (II) LoadModule: "evdev"
[ 13.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.846] (II) Module evdev: vendor="X.Org Foundation"
[ 13.846] compiled for 1.16.2, module version = 2.9.1
[ 13.846] Module class: X.Org XInput Driver
[ 13.846] ABI class: X.Org XInput driver, version 21.0
[ 13.846] (II) Using input driver 'evdev' for 'Power Button'
[ 13.846] (**) Power Button: always reports core events
[ 13.846] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 13.846] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.846] (--) evdev: Power Button: Found keys
[ 13.846] (II) evdev: Power Button: Configuring as keyboard
[ 13.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 13.846] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.846] (**) Option "xkb_rules" "evdev"
[ 13.846] (**) Option "xkb_model" "pc104"
[ 13.846] (**) Option "xkb_layout" "us"
[ 13.880] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 13.880] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.880] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.880] (**) Video Bus: always reports core events
[ 13.880] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 13.880] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.880] (--) evdev: Video Bus: Found keys
[ 13.880] (II) evdev: Video Bus: Configuring as keyboard
[ 13.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[ 13.880] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.881] (**) Option "xkb_rules" "evdev"
[ 13.881] (**) Option "xkb_model" "pc104"
[ 13.881] (**) Option "xkb_layout" "us"
[ 13.881] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 13.881] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.881] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.881] (**) Video Bus: always reports core events
[ 13.881] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 13.881] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.881] (--) evdev: Video Bus: Found keys
[ 13.881] (II) evdev: Video Bus: Configuring as keyboard
[ 13.881] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:30/LNXVIDEO:00/input/input13/event12"
[ 13.881] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 13.881] (**) Option "xkb_rules" "evdev"
[ 13.881] (**) Option "xkb_model" "pc104"
[ 13.881] (**) Option "xkb_layout" "us"
[ 13.882] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 13.882] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.882] (II) Using input driver 'evdev' for 'Power Button'
[ 13.882] (**) Power Button: always reports core events
[ 13.882] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 13.882] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.882] (--) evdev: Power Button: Found keys
[ 13.882] (II) evdev: Power Button: Configuring as keyboard
[ 13.882] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[ 13.882] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 13.882] (**) Option "xkb_rules" "evdev"
[ 13.882] (**) Option "xkb_model" "pc104"
[ 13.882] (**) Option "xkb_layout" "us"
[ 13.883] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 13.883] (II) No input driver specified, ignoring this device.
[ 13.883] (II) This device may have been added with another device file.
[ 13.883] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 13.883] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.883] (II) Using input driver 'evdev' for 'Sleep Button'
[ 13.883] (**) Sleep Button: always reports core events
[ 13.883] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 13.883] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 13.883] (--) evdev: Sleep Button: Found keys
[ 13.883] (II) evdev: Sleep Button: Configuring as keyboard
[ 13.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[ 13.884] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 13.884] (**) Option "xkb_rules" "evdev"
[ 13.884] (**) Option "xkb_model" "pc104"
[ 13.884] (**) Option "xkb_layout" "us"
[ 13.885] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event1)
[ 13.885] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 13.885] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 13.885] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 13.885] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event1"
[ 13.885] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[ 13.885] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 13.885] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 13.885] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:0745.0001/input/input2/event1"
[ 13.885] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[ 13.885] (**) Option "xkb_rules" "evdev"
[ 13.885] (**) Option "xkb_model" "pc104"
[ 13.885] (**) Option "xkb_layout" "us"
[ 13.886] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event2)
[ 13.886] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 13.886] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 13.886] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 13.886] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 13.886] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event2"
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 13.886] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing absolute x/y axes to exist.
[ 13.886] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 13.886] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 13.886] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 13.886] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 13.886] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 13.886] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:0745.0002/input/input3/event2"
[ 13.886] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 12)
[ 13.886] (**) Option "xkb_rules" "evdev"
[ 13.886] (**) Option "xkb_model" "pc104"
[ 13.886] (**) Option "xkb_layout" "us"
[ 13.887] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[ 13.887] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[ 13.887] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 13.887] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 13.887] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 13.887] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 13.887] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[ 13.887] (II) No input driver specified, ignoring this device.
[ 13.887] (II) This device may have been added with another device file.
[ 13.888] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event3)
[ 13.888] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 13.888] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 13.888] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 13.888] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event3"
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute multitouch axes
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[ 13.888] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 13.888] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing relative x/y axes to exist.
[ 13.888] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 13.888] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 13.888] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 13.888] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 13.888] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:045E:0745.0003/input/input4/event3"
[ 13.888] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 13)
[ 13.888] (**) Option "xkb_rules" "evdev"
[ 13.888] (**) Option "xkb_model" "pc104"
[ 13.888] (**) Option "xkb_layout" "us"
[ 13.888] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[ 13.888] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[ 13.889] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 13.889] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 13.889] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 13.889] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 13.889] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[ 13.889] (II) No input driver specified, ignoring this device.
[ 13.889] (II) This device may have been added with another device file.
[ 13.889] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event14)
[ 13.889] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 13.889] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[ 13.889] (**) Laptop_Integrated_Webcam_HD: always reports core events
[ 13.890] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event14"
[ 13.890] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x644b
[ 13.890] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[ 13.890] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[ 13.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input16/event14"
[ 13.890] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 14)
[ 13.890] (**) Option "xkb_rules" "evdev"
[ 13.890] (**) Option "xkb_model" "pc104"
[ 13.890] (**) Option "xkb_layout" "us"
[ 13.890] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 13.890] (II) No input driver specified, ignoring this device.
[ 13.890] (II) This device may have been added with another device file.
[ 13.891] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 13.891] (II) No input driver specified, ignoring this device.
[ 13.891] (II) This device may have been added with another device file.
[ 13.891] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 13.891] (II) No input driver specified, ignoring this device.
[ 13.891] (II) This device may have been added with another device file.
[ 13.891] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event18)
[ 13.891] (II) No input driver specified, ignoring this device.
[ 13.891] (II) This device may have been added with another device file.
[ 13.892] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.892] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.892] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.892] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.892] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.892] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 13.892] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 13.892] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.892] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.892] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 13.892] (**) Option "xkb_rules" "evdev"
[ 13.892] (**) Option "xkb_model" "pc104"
[ 13.892] (**) Option "xkb_layout" "us"
[ 13.892] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event10)
[ 13.892] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 13.892] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS GlidePoint'
[ 13.892] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 13.893] (**) evdev: AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event10"
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute axes
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute multitouch axes
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
[ 13.893] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute touchpad.
[ 13.893] (II) evdev: AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
[ 13.893] (**) evdev: AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
[ 13.893] (**) evdev: AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.893] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 13.893] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 16)
[ 13.893] (II) evdev: AlpsPS/2 ALPS GlidePoint: initialized for absolute axes.
[ 13.893] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 13.893] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[ 13.893] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 13.893] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 13.893] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 13.893] (II) No input driver specified, ignoring this device.
[ 13.893] (II) This device may have been added with another device file.
[ 13.894] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event9)
[ 13.894] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 13.894] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 13.894] (**) ALPS PS/2 Device: always reports core events
[ 13.894] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event9"
[ 13.894] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 13.894] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 13.894] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 13.894] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 13.894] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 13.894] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 13.894] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.894] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[ 13.894] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 17)
[ 13.894] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 13.894] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 13.894] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 13.894] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 13.894] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 13.895] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse1)
[ 13.895] (II) No input driver specified, ignoring this device.
[ 13.895] (II) This device may have been added with another device file.
[ 13.895] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 13.895] (II) No input driver specified, ignoring this device.
[ 13.895] (II) This device may have been added with another device file.
[ 13.895] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[ 13.895] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 13.895] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 13.896] (**) Dell WMI hotkeys: always reports core events
[ 13.896] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event11"
[ 13.896] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 13.896] (--) evdev: Dell WMI hotkeys: Found keys
[ 13.896] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 13.896] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event11"
[ 13.896] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[ 13.896] (**) Option "xkb_rules" "evdev"
[ 13.896] (**) Option "xkb_model" "pc104"
[ 13.896] (**) Option "xkb_layout" "us"
[ 34.117] (II) evdev: Dell WMI hotkeys: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: ALPS PS/2 Device: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: AlpsPS/2 ALPS GlidePoint: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: AT Translated Set 2 keyboard: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Laptop_Integrated_Webcam_HD: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Sleep Button: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Power Button: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Video Bus: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Video Bus: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.117] (II) evdev: Power Button: Close
[ 34.117] (II) UnloadModule: "evdev"
[ 34.119] (EE) Server terminated successfully (0). Closing log file.and dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d2c1bd7e-e6c8-4cb2-bee9-f0d2d7863d43 rw ipv6.disable=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000709dcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000709dd000-0x0000000070bdefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000070bdf000-0x00000000b7f68fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7f69000-0x00000000b8168fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000b8169000-0x00000000baeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xbaffe000 ACPI 2.0=0xbaffe014 SMBIOS=0xbac02000
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x000000000000b000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x000000000000b000-0x0000000000067000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x0000000000067000-0x0000000000087000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000087000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000088000-0x000000000008e000) (0MB)
[ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000008e000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000100000-0x0000000000110000) (0MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000000110000-0x0000000001060000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001060000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f50000) (15MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000002f50000-0x0000000020000000) (464MB)
[ 0.000000] efi: mem13: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037982000) (375MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000037982000-0x0000000037cb9000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000037cb9000-0x0000000040004000) (131MB)
[ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000040005000-0x000000006e3a2000) (739MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000006e3a2000-0x000000006e3c2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000006e3c2000-0x00000000709c7000) (38MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000709c7000-0x00000000709dd000) (0MB)
[ 0.000000] efi: mem22: type=0, attr=0xf, range=[0x00000000709dd000-0x0000000070bdf000) (2MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000070bdf000-0x0000000071392000) (7MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000071392000-0x000000007bf5e000) (171MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000007bf5e000-0x00000000a6e6a000) (687MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000a6e6a000-0x00000000a7136000) (2MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x00000000a7136000-0x00000000a7154000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000a7154000-0x00000000a9eb9000) (45MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000a9eb9000-0x00000000aa002000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000aa002000-0x00000000aa01b000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000aa01b000-0x00000000aa075000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000aa075000-0x00000000aa077000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000aa077000-0x00000000aa089000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000aa089000-0x00000000aa08c000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000aa08c000-0x00000000abb17000) (26MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000abb17000-0x00000000abb28000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000abb28000-0x00000000abb2a000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000abb2a000-0x00000000abb2c000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000abb2c000-0x00000000acf69000) (20MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000acf69000-0x00000000af9c6000) (42MB)
[ 0.000000] efi: mem41: type=2, attr=0xf, range=[0x00000000af9c6000-0x00000000af9d0000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000af9d0000-0x00000000b7f69000) (133MB)
[ 0.000000] efi: mem43: type=5, attr=0x800000000000000f, range=[0x00000000b7f69000-0x00000000b8169000) (2MB)
[ 0.000000] efi: mem44: type=6, attr=0x800000000000000f, range=[0x00000000b8169000-0x00000000ba695000) (37MB)
[ 0.000000] efi: mem45: type=0, attr=0xf, range=[0x00000000ba695000-0x00000000baeef000) (8MB)
[ 0.000000] efi: mem46: type=10, attr=0xf, range=[0x00000000baeef000-0x00000000baf9f000) (0MB)
[ 0.000000] efi: mem47: type=9, attr=0xf, range=[0x00000000baf9f000-0x00000000bafff000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000bafff000-0x00000000bb000000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x0000000100000000-0x000000043f600000) (13302MB)
[ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x00000000bb000000-0x00000000bfa00000) (74MB)
[ 0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem54: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem55: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem58: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5720/0JVJ94, BIOS A19 04/18/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask E00000000 write-back
[ 0.000000] 7 base 400000000 mask FC0000000 write-back
[ 0.000000] 8 base 43F800000 mask FFF800000 uncachable
[ 0.000000] 9 base 43F600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000088000] 88000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2c000, 0x02b2cfff] PGTABLE
[ 0.000000] BRK [0x02b2d000, 0x02b2dfff] PGTABLE
[ 0.000000] BRK [0x02b2e000, 0x02b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43f400000-0x43f5fffff]
[ 0.000000] [mem 0x43f400000-0x43f5fffff] page 2M
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43f3fffff]
[ 0.000000] [mem 0x43c000000-0x43f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x709dcfff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x707fffff] page 2M
[ 0.000000] [mem 0x70800000-0x709dcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x70bdf000-0xb7f68fff]
[ 0.000000] [mem 0x70bdf000-0x70bfffff] page 4k
[ 0.000000] [mem 0x70c00000-0xb7dfffff] page 2M
[ 0.000000] [mem 0xb7e00000-0xb7f68fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BAFFE014 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000BAFFE170 0000AC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000BAFE3000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000BAFF1000 00A853 (v02 DELL IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BAF7C000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BAFFC000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000BAFEA000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000BAFE9000 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFE8000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: MSDM 0x00000000BAFE5000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000BAFE2000 000EB6 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000BAFE1000 00027E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BGRT 0x00000000BAFE0000 000038 (v00 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DBG2 0x00000000BAFDF000 000070 (v00 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43f5fffff]
[ 0.000000] NODE_DATA [mem 0x43f5eb000-0x43f5eefff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ec00000-ffff88043ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x709dcfff]
[ 0.000000] node 0: [mem 0x70bdf000-0xb7f68fff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x43f5fffff]
[ 0.000000] On node 0 totalpages: 4157686
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 73 pages reserved
[ 0.000000] DMA zone: 3983 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11694 pages used for memmap
[ 0.000000] DMA32 zone: 748391 pages, LIFO batch:31
[ 0.000000] Normal zone: 53208 pages used for memmap
[ 0.000000] Normal zone: 3405312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x709dd000-0x70bdefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7f69000-0xb8168fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8169000-0xbaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043f200000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4092647
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d2c1bd7e-e6c8-4cb2-bee9-f0d2d7863d43 rw ipv6.disable=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16091664K/16630744K available (5386K kernel code, 896K rwdata, 1712K rodata, 1140K init, 1176K bss, 539080K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.893 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.69 BogoMIPS (lpj=7316310)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000048] ACPI: Core revision 20140724
[ 0.008738] ACPI: All ACPI Tables successfully acquired
[ 0.030299] Security Framework initialized
[ 0.030306] Yama: becoming mindful.
[ 0.031332] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035768] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037761] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037779] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038013] Initializing cgroup subsys memory
[ 0.038018] Initializing cgroup subsys devices
[ 0.038021] Initializing cgroup subsys freezer
[ 0.038023] Initializing cgroup subsys net_cls
[ 0.038024] Initializing cgroup subsys blkio
[ 0.038047] CPU: Physical Processor ID: 0
[ 0.038048] CPU: Processor Core ID: 0
[ 0.038053] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.038457] mce: CPU supports 9 MCE banks
[ 0.038468] CPU0: Thermal monitoring handled by SMI
[ 0.038478] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.038605] Freeing SMP alternatives memory: 20K (ffffffff819ff000 - ffffffff81a04000)
[ 0.044946] ftrace: allocating 20686 entries in 81 pages
[ 0.055994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089036] smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (fam: 06, model: 3a, stepping: 09)
[ 0.089043] TSC deadline timer enabled
[ 0.089068] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.089090] ... version: 3
[ 0.089091] ... bit width: 48
[ 0.089092] ... generic registers: 4
[ 0.089093] ... value mask: 0000ffffffffffff
[ 0.089094] ... max period: 0000ffffffffffff
[ 0.089095] ... fixed-purpose events: 3
[ 0.089096] ... event mask: 000000070000000f
[ 0.112507] x86: Booting SMP configuration:
[ 0.112509] .... node #0, CPUs: #1
[ 0.124072] CPU1: Thermal monitoring handled by SMI
[ 0.126226] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.132900] #2
[ 0.144470] CPU2: Thermal monitoring handled by SMI
[ 0.153302] #3
[ 0.164873] CPU3: Thermal monitoring handled by SMI
[ 0.181950] #4
[ 0.181950] CPU4: Thermal monitoring handled by SMI
[ 0.202350] #5
[ 0.202350] CPU5: Thermal monitoring handled by SMI
[ 0.222761] #6
[ 0.222761] CPU6: Thermal monitoring handled by SMI
[ 0.243162] #7
[ 0.243163] CPU7: Thermal monitoring handled by SMI
[ 0.245231] x86: Booted up 1 node, 8 CPUs
[ 0.245235] smpboot: Total of 8 processors activated (35132.55 BogoMIPS)
[ 0.253156] devtmpfs: initialized
[ 0.256732] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[ 0.257662] pinctrl core: initialized pinctrl subsystem
[ 0.257704] RTC time: 12:27:40, date: 12/03/14
[ 0.257788] NET: Registered protocol family 16
[ 0.257911] cpuidle: using governor ladder
[ 0.257914] cpuidle: using governor menu
[ 0.257946] ACPI: bus type PCI registered
[ 0.257947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258034] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.258037] PCI: not using MMCONFIG
[ 0.258038] PCI: Using configuration type 1 for base access
[ 0.269994] ACPI: Added _OSI(Module Device)
[ 0.269996] ACPI: Added _OSI(Processor Device)
[ 0.269997] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.269998] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.272773] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.299709] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.300159] ACPI: Dynamic OEM Table Load:
[ 0.300169] ACPI: SSDT 0xFFFF880428B3B000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.313254] ACPI: Dynamic OEM Table Load:
[ 0.313262] ACPI: SSDT 0xFFFF880428B0B400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.326488] ACPI: Dynamic OEM Table Load:
[ 0.326495] ACPI: SSDT 0xFFFF880428B11600 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.341767] ACPI: Interpreter enabled
[ 0.341774] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.341779] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.341792] ACPI: (supports S0 S3 S4 S5)
[ 0.341794] ACPI: Using IOAPIC for interrupt routing
[ 0.341810] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.342140] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.342235] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.347504] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.347510] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.347629] \_SB_.PCI0:_OSC invalid UUID
[ 0.347631] _OSC request data:1 1f 0
[ 0.347635] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.348277] PCI host bridge to bus 0000:00
[ 0.348280] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.348282] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.348284] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.348286] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.348288] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.348296] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.348373] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.348409] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.348436] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.348479] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.348491] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.348498] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.348503] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.348598] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.348623] pci 0000:00:14.0: reg 0x10: [mem 0xf1600000-0xf160ffff 64bit]
[ 0.348699] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.348729] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.348774] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.348798] pci 0000:00:16.0: reg 0x10: [mem 0xf1615000-0xf161500f 64bit]
[ 0.348878] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.348957] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.348980] pci 0000:00:1a.0: reg 0x10: [mem 0xf161a000-0xf161a3ff]
[ 0.349074] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.349119] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.349164] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.349182] pci 0000:00:1b.0: reg 0x10: [mem 0xf1610000-0xf1613fff 64bit]
[ 0.349262] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.349335] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.349474] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.349516] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.349559] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.349646] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.349680] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.349726] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.349750] pci 0000:00:1d.0: reg 0x10: [mem 0xf1619000-0xf16193ff]
[ 0.349852] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.349897] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.349941] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.350110] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.350130] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f]
[ 0.350139] pci 0000:00:1f.2: reg 0x14: [io 0x40bc-0x40bf]
[ 0.350147] pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097]
[ 0.350155] pci 0000:00:1f.2: reg 0x1c: [io 0x40b8-0x40bb]
[ 0.350164] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.350173] pci 0000:00:1f.2: reg 0x24: [mem 0xf1618000-0xf16187ff]
[ 0.350222] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.350285] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.350303] pci 0000:00:1f.3: reg 0x10: [mem 0xf1614000-0xf16140ff 64bit]
[ 0.350325] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.350446] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.350458] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[ 0.350470] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350480] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.350488] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.350497] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.350554] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.356463] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.356468] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.356473] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.356479] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.356632] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[ 0.356667] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf1507fff 64bit]
[ 0.356860] pci 0000:02:00.0: supports D1 D2
[ 0.356862] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.356901] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.363179] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.363186] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.363284] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.363309] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.363344] pci 0000:03:00.0: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[ 0.363367] pci 0000:03:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[ 0.363483] pci 0000:03:00.0: supports D1 D2
[ 0.363484] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.363524] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.369828] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.369836] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.369860] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[ 0.370331] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.370382] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370431] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370478] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370527] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370577] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370625] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370672] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.370870] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.370964] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.371061] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.371063] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.371065] vgaarb: loaded
[ 0.371067] vgaarb: bridge control possible 0000:00:02.0
[ 0.371127] PCI: Using ACPI for IRQ routing
[ 0.372791] PCI: pci_cache_line_size set to 64 bytes
[ 0.372860] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.372861] e820: reserve RAM buffer [mem 0x709dd000-0x73ffffff]
[ 0.372863] e820: reserve RAM buffer [mem 0xb7f69000-0xb7ffffff]
[ 0.372864] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.372865] e820: reserve RAM buffer [mem 0x43f600000-0x43fffffff]
[ 0.372966] NetLabel: Initializing
[ 0.372967] NetLabel: domain hash size = 128
[ 0.372968] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.372980] NetLabel: unlabeled traffic allowed by default
[ 0.373004] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.373009] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.375044] Switched to clocksource hpet
[ 0.379884] pnp: PnP ACPI init
[ 0.380006] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.380008] system 00:00: [io 0x1000-0x1003] has been reserved
[ 0.380010] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.380012] system 00:00: [io 0xffff] has been reserved
[ 0.380014] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.380016] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.380018] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.380020] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.380023] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380052] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.380100] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.380103] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.380140] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.380168] pnp 00:04: Plug and Play ACPI device, IDs DLL0565 PNP0f13 (active)
[ 0.380260] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.380282] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.380284] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.380286] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.380288] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.380290] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.380292] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.380294] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.380296] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.380298] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.380300] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.380302] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380529] pnp: PnP ACPI: found 6 devices
[ 0.387094] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.387125] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.387127] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.387129] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.387131] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.387134] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.387137] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.387140] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.387147] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.387160] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.387163] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.387171] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[ 0.387178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.387180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.387182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387183] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.387185] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.387187] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[ 0.387189] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.387191] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.387193] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.387194] pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[ 0.387217] NET: Registered protocol family 2
[ 0.387436] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.387681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.387794] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.387812] TCP: reno registered
[ 0.387830] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.387885] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.387962] NET: Registered protocol family 1
[ 0.387978] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.388426] PCI: CLS 64 bytes, default 64
[ 0.388473] Unpacking initramfs...
[ 0.447760] Freeing initrd memory: 3292K (ffff880037982000 - ffff880037cb9000)
[ 0.447769] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.447771] software IO TLB [mem 0xa5eb9000-0xa9eb9000] (64MB) mapped at [ffff8800a5eb9000-ffff8800a9eb8fff]
[ 0.448143] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.448176] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448183] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448191] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448199] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448208] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448216] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448224] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448232] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 0.448277] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.448303] Scanning for low memory corruption every 60 seconds
[ 0.448605] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.448625] Initialise system trusted keyring
[ 0.449035] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.450342] zpool: loaded
[ 0.450345] zbud: loaded
[ 0.450518] VFS: Disk quotas dquot_6.5.2
[ 0.450550] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450669] msgmni has been set to 31815
[ 0.450723] Key type big_key registered
[ 0.450887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.450942] io scheduler noop registered
[ 0.450944] io scheduler deadline registered
[ 0.450971] io scheduler cfq registered (default)
[ 0.451115] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.451401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.451416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.451449] efifb: probing for efifb
[ 0.451465] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 5632k, total 5632k
[ 0.451467] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.451467] efifb: scrolling: redraw
[ 0.451469] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.455569] Console: switching to colour frame buffer device 200x56
[ 0.459566] fb0: EFI VGA frame buffer device
[ 0.459575] intel_idle: MWAIT substates: 0x21120
[ 0.459576] intel_idle: v0.4 model 0x3A
[ 0.459577] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.459901] GHES: HEST is not enabled!
[ 0.459986] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.460417] Linux agpgart interface v0.103
[ 0.460479] rtc_cmos 00:01: RTC can wake from S4
[ 0.460610] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.460642] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.460653] Intel P-state driver initializing.
[ 0.460887] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.461082] TCP: cubic registered
[ 0.461087] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.461093] NET: Registered protocol family 17
[ 0.461685] Loading compiled-in X.509 certificates
[ 0.461708] registered taskstats version 1
[ 0.462516] Magic number: 10:459:480
[ 0.462644] rtc_cmos 00:01: setting system clock to 2014-12-03 12:27:40 UTC (1417609660)
[ 0.462770] PM: Hibernation image not present or could not be loaded.
[ 0.464121] Freeing unused kernel memory: 1140K (ffffffff818e2000 - ffffffff819ff000)
[ 0.464124] Write protecting the kernel read-only data: 8192k
[ 0.467598] Freeing unused kernel memory: 748K (ffff880002545000 - ffff880002600000)
[ 0.469029] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
[ 0.477424] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 0.493938] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.497174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.497205] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.498384] ACPI: bus type USB registered
[ 0.498407] usbcore: registered new interface driver usbfs
[ 0.498415] usbcore: registered new interface driver hub
[ 0.498473] usbcore: registered new device driver usb
[ 0.498926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499203] ehci-pci: EHCI PCI platform driver
[ 0.499350] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.499357] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.499371] ehci-pci 0000:00:1a.0: debug port 2
[ 0.499901] SCSI subsystem initialized
[ 0.501259] libata version 3.00 loaded.
[ 0.503284] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.503307] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf161a000
[ 0.511870] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.512036] hub 1-0:1.0: USB hub found
[ 0.512042] hub 1-0:1.0: 2 ports detected
[ 0.512245] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.512250] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.512262] ehci-pci 0000:00:1d.0: debug port 2
[ 0.516173] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.516184] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1619000
[ 0.516728] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.525280] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.525452] hub 2-0:1.0: USB hub found
[ 0.525457] hub 2-0:1.0: 2 ports detected
[ 0.525706] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.525712] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.525821] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.525838] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
[ 0.526067] hub 3-0:1.0: USB hub found
[ 0.526078] hub 3-0:1.0: 4 ports detected
[ 0.526374] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.526376] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.526570] hub 4-0:1.0: USB hub found
[ 0.526580] hub 4-0:1.0: 4 ports detected
[ 0.526925] ahci 0000:00:1f.2: version 3.0
[ 0.527046] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.538622] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[ 0.538626] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.546016] scsi host0: ahci
[ 0.546367] scsi host1: ahci
[ 0.546729] scsi host2: ahci
[ 0.547036] scsi host3: ahci
[ 0.547290] scsi host4: ahci
[ 0.547507] scsi host5: ahci
[ 0.547552] ata1: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618100 irq 26
[ 0.547554] ata2: DUMMY
[ 0.547555] ata3: DUMMY
[ 0.547559] ata4: SATA max UDMA/133 abar m2048@0xf1618000 port 0xf1618280 irq 26
[ 0.547561] ata5: DUMMY
[ 0.547562] ata6: DUMMY
[ 0.818914] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.865626] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.865656] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.872092] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20003, max UDMA/133
[ 0.872098] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.878575] ata1.00: configured for UDMA/133
[ 0.878966] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0003 PQ: 0 ANSI: 5
[ 0.880980] ata4.00: ATAPI: MATSHITA DVD+/-RW UJ8D1, D.02, max UDMA/100
[ 0.894215] ata4.00: configured for UDMA/100
[ 0.900773] scsi 3:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8D1 D.02 PQ: 0 ANSI: 5
[ 0.917940] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 0.918034] sd 0:0:0:0: [sda] Write Protect is off
[ 0.918037] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.918072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.933941] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.933943] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.934124] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.943185] hub 1-1:1.0: USB hub found
[ 0.943351] hub 1-1:1.0: 6 ports detected
[ 0.999719] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.001479] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.102553] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.283601] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.296118] usbcore: registered new interface driver usbhid
[ 1.296121] usbhid: USB HID core driver
[ 1.296866] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:0745.0001/input/input2
[ 1.296944] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input0
[ 1.297295] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:045E:0745.0002/input/input3
[ 1.297360] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input1
[ 1.306783] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:045E:0745.0003/input/input4
[ 1.306931] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input2
[ 1.386252] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.449568] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.510494] hub 2-1:1.0: USB hub found
[ 1.510699] hub 2-1:1.0: 8 ports detected
[ 1.589752] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.801762] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1.816806] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.125185] random: nonblocking pool is initialized
[ 2.450882] Switched to clocksource tsc
[ 2.623819] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 2.624207] systemd[1]: Detected architecture 'x86-64'.
[ 2.674860] systemd[1]: Set hostname to <morpheus>.
[ 3.668178] systemd[1]: Starting Login Prompts.
[ 3.668367] systemd[1]: Reached target Login Prompts.
[ 3.668384] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.668430] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.668442] systemd[1]: Starting Remote File Systems.
[ 3.668561] systemd[1]: Reached target Remote File Systems.
[ 3.668581] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.668622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.668633] systemd[1]: Starting Paths.
[ 3.668728] systemd[1]: Reached target Paths.
[ 3.668755] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.668977] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.668993] systemd[1]: Starting Encrypted Volumes.
[ 3.669093] systemd[1]: Reached target Encrypted Volumes.
[ 3.669106] systemd[1]: Expecting device dev-sda5.device...
[ 3.669188] systemd[1]: Expecting device dev-sda2.device...
[ 3.669269] systemd[1]: Starting Root Slice.
[ 3.680200] systemd[1]: Created slice Root Slice.
[ 3.680216] systemd[1]: Starting User and Session Slice.
[ 3.680501] systemd[1]: Created slice User and Session Slice.
[ 3.680514] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.680657] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.680669] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.680782] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.680794] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.680914] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.680926] systemd[1]: Starting Journal Socket (/dev/log).
[ 3.681052] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.681068] systemd[1]: Starting udev Kernel Socket.
[ 3.681172] systemd[1]: Listening on udev Kernel Socket.
[ 3.681187] systemd[1]: Starting udev Control Socket.
[ 3.681294] systemd[1]: Listening on udev Control Socket.
[ 3.681305] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.681420] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.681433] systemd[1]: Starting Journal Socket.
[ 3.681546] systemd[1]: Listening on Journal Socket.
[ 3.681564] systemd[1]: Starting System Slice.
[ 3.681843] systemd[1]: Created slice System Slice.
[ 3.681859] systemd[1]: Starting system-getty.slice.
[ 3.682135] systemd[1]: Created slice system-getty.slice.
[ 3.682153] systemd[1]: Started File System Check on Root Device.
[ 3.704449] systemd[1]: Mounting Temporary Directory...
[ 3.721519] systemd[1]: Started Load Kernel Modules.
[ 3.721609] systemd[1]: Mounting Configuration File System...
[ 3.722163] systemd[1]: Mounted FUSE Control File System.
[ 3.722192] systemd[1]: Starting Apply Kernel Variables...
[ 3.722675] systemd[1]: Starting udev Coldplug all Devices...
[ 4.010711] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.011514] systemd[1]: Starting Setup Virtual Console...
[ 4.012250] systemd[1]: Mounting Debug File System...
[ 4.012897] systemd[1]: Mounting Huge Pages File System...
[ 4.025913] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.025982] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.026681] systemd[1]: Starting Journal Service...
[ 4.027305] systemd[1]: Starting Slices.
[ 4.027412] systemd[1]: Reached target Slices.
[ 4.027449] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.028708] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.028846] systemd[1]: Mounted Huge Pages File System.
[ 4.029010] systemd[1]: Mounted Debug File System.
[ 4.029119] systemd[1]: Mounted Configuration File System.
[ 4.029219] systemd[1]: Mounted Temporary Directory.
[ 4.041660] systemd[1]: Started udev Coldplug all Devices.
[ 4.120694] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.161822] systemd[1]: Started Setup Virtual Console.
[ 4.162938] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[ 4.163921] systemd[1]: Started Remount Root and Kernel File Systems.
[ 4.187770] systemd[1]: Started Rebuild Hardware Database.
[ 4.187794] systemd[1]: Starting Load/Save Random Seed...
[ 4.188404] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 4.188441] systemd[1]: Started First Boot Wizard.
[ 4.188463] systemd[1]: Started Create System Users.
[ 4.188540] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.265451] systemd[1]: Started Apply Kernel Variables.
[ 4.342976] systemd[1]: Started Load/Save Random Seed.
[ 4.464756] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.465949] systemd[1]: Starting udev Kernel Device Manager...
[ 4.468335] systemd[1]: Starting Local File Systems (Pre).
[ 4.470087] systemd[1]: Reached target Local File Systems (Pre).
[ 5.140210] systemd[1]: Started udev Kernel Device Manager.
[ 5.722570] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.770808] ACPI: AC Adapter [ADP0] (on-line)
[ 5.771065] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 5.771071] ACPI: Power Button [PWRB]
[ 5.771129] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 5.771132] ACPI: Sleep Button [SLPB]
[ 5.771183] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 5.771821] ACPI: Lid Switch [LID0]
[ 5.771913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.771916] ACPI: Power Button [PWRF]
[ 5.776685] ACPI: Battery Slot [BAT0] (battery present)
[ 5.776981] wmi: Mapper loaded
[ 5.859114] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.859119] ACPI: Thermal Zone [TZ00] (44 C)
[ 5.859463] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.859466] ACPI: Thermal Zone [TZ01] (44 C)
[ 6.140214] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[ 6.140223] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.140228] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 6.140233] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 6.140237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.140238] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 6.140242] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 6.140245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.140247] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 6.140250] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 6.140254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.140255] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.149397] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 6.196813] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.196820] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.197051] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 6.197201] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc900018cc000, 5c:f9:dd:50:42:b4, XID 00c00000 IRQ 27
[ 6.251673] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 6.289448] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.289843] AVX version of gcm_enc/dec engaged.
[ 6.321625] iTCO_vendor_support: vendor-support=0
[ 6.321966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.321994] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.322075] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.340981] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 6.449420] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
[ 6.449452] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
[ 6.449478] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
[ 6.449530] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
[ 6.449595] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
[ 6.463629] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 6.463634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.463933] input: Dell WMI hotkeys as /devices/virtual/input/input11
[ 6.464723] bcma: bus0: Bus registered
[ 6.583994] [drm] Initialized drm 1.1.0 20060810
[ 7.007174] media: Linux media interface: v0.10
[ 7.035803] Linux video capture interface: v2.00
[ 7.099464] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input12
[ 7.113814] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 7.224246] mousedev: PS/2 mouse device common for all mice
[ 7.478407] Bluetooth: Core ver 2.19
[ 7.478431] NET: Registered protocol family 31
[ 7.478433] Bluetooth: HCI device and connection manager initialized
[ 7.478439] Bluetooth: HCI socket layer initialized
[ 7.478441] Bluetooth: L2CAP socket layer initialized
[ 7.478447] Bluetooth: SCO socket layer initialized
[ 7.699768] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:644b)
[ 7.725632] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13
[ 7.725710] usbcore: registered new interface driver uvcvideo
[ 7.725711] USB Video Class driver (1.1.1)
[ 7.937104] usbcore: registered new interface driver btusb
[ 8.005164] bluetooth hci0: Direct firmware load for brcm/BCM43142A0-0a5c-21d7.hcd failed with error -2
[ 8.005173] Bluetooth: hci0: BCM: patch brcm/BCM43142A0-0a5c-21d7.hcd not found
[ 8.194031] [drm] Memory usable by graphics device = 2048M
[ 8.194036] [drm] Replacing VGA console driver
[ 8.194041] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 8.194043] fb: switching to inteldrmfb from EFI VGA
[ 8.194086] Console: switching to colour dummy device 80x25
[ 8.213343] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 8.213359] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.213361] [drm] Driver supports precise vblank timestamp query.
[ 8.213536] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.216421] systemd[1]: Starting system-systemd\x2drfkill.slice.
[ 8.216858] systemd[1]: Created slice system-systemd\x2drfkill.slice.
[ 8.216883] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
[ 8.217605] systemd[1]: Starting Bluetooth.
[ 8.217672] systemd[1]: Reached target Bluetooth.
[ 8.255272] fbcon: inteldrmfb (fb0) is primary device
[ 8.530058] intel_rapl: Found RAPL domain package
[ 8.530062] intel_rapl: Found RAPL domain core
[ 8.530064] intel_rapl: Found RAPL domain uncore
[ 8.632957] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 8.632957] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 8.982515] nvidia: module license 'NVIDIA' taints kernel.
[ 8.982516] Disabling lock debugging due to kernel taint
[ 8.990600] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 9.008013] Console: switching to colour frame buffer device 200x56
[ 9.014613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.014615] i915 0000:00:02.0: registered panic notifier
[ 9.014767] systemd[1]: Started Journal Service.
[ 9.039686] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.039731] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.039800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:30/LNXVIDEO:00/input/input14
[ 9.055594] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.055744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 9.055942] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 9.056103] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 9.056111] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 343.22 Thu Sep 11 16:27:43 PDT 2014
[ 9.056216] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 9.132068] Adding 2096672k swap on /dev/sda5. Priority:-1 extents:1 across:2096672k FS
[ 9.197331] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 9.197337] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.197339] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 9.197341] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.197343] sound hdaudioC0D0: inputs:
[ 9.197346] sound hdaudioC0D0: Internal Mic=0x11
[ 9.197348] sound hdaudioC0D0: Mic=0xa
[ 9.270497] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input16
[ 9.270991] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 9.271212] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 9.271604] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 9.278758] systemd-journald[189]: Received request to flush runtime journal from PID 1Offline
#4 2014-12-04 09:22:01
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 15,558
Re: KDE works fine, Gnome crashes.
[ 11.809] (--) PCI:*(0:0:2:0) 8086:0166:1028:0565 rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 11.809] (--) PCI: (0:1:0:0) 10de:1140:1028:0565 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.809] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.810] (II) LoadModule: "glx"
[ 11.823] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.075] compiled for 4.0.2, module version = 1.0.0
[ 13.075] Module class: X.Org Server Extension
[ 13.087] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 13.098] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 13.098] loading driver: nvidia
<snip>
[ 13.449] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)You have 2 videocards, an intel & a Nivida card.
You have both intel and nvidia proprietary drivers installed, but the nividia driver is either wrong version or not configured correctly.
I expect gnome/mutter choke on that, while KDE/Kwin uses some fallback method (maybe they just use the intel card and ignore the nvidia one ).
Does your system have an Optimus logo ?
Last edited by Lone_Wolf (2014-12-04 09:22:35)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#5 2014-12-04 09:59:01
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
Re: KDE works fine, Gnome crashes.
Well I followed the guidelines from the wiki. My machine is a Dell Inspiron 17R i7 processor, 16GB RAM and it has two video cards. Intel HD 4000 and Nvidia GT 630M. As far as i know i had to install
xf86-video-intelfor my intel graphics card and for the Nvidia GT 630M, according to http://nouveau.freedesktop.org/wiki/CodeNames/ it's NVD7 so i had to use
nvidia nvidia-libglBy the way, I checked the BIOS if I could but I don't have an option to disable one of the two cards.
One thing that I noticed is that in the NVD7 section it says and I quote:
NVD7 (GF117) Geforce GT 620M, 625M, (some) 630M, 710M, 720M
Maybe my card is not in those some that are supported?
Is there a way to disable completely the intel and use only the nvidia?
Last edited by dbit87 (2014-12-04 10:18:28)
Offline
#6 2014-12-04 12:36:26
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 15,558
Re: KDE works fine, Gnome crashes.
lspci may help to determine which chipset you have.
nvidia site lists 340.58 as the linux driver for GeForce GT 630M , you'll need nvidia-340xx & nvidia-340xx-libgl packages for that version.
Is there a way to disable completely the intel and use only the nvidia?
hard to tell, is this an Nvidia Optimus system ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#7 2014-12-04 13:26:19
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
Re: KDE works fine, Gnome crashes.
lspci lists it as a 3D Controller, GF117
According to Nvidia:
"Accelerate your notebook’s performance by up to 3.5x with cutting-edge NVIDIA GeForce GT 630M dedicated graphics. Get GeForce dedicated graphics for amazing gaming and multimedia, plus NVIDIA® Optimus™ technology for maximum battery life."
So yes, its a Nvidia Optimus System.
Offline
#8 2014-12-04 23:12:37
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 15,558
Re: KDE works fine, Gnome crashes.
Ok, that matches what i could find online about the geforce GT 630M .
You will need nvidia-340xx / nvidia-340xx-libgl instead of the nvidia packages without a number.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#9 2014-12-05 00:39:49
- mrunion
- Member
- From: Jonesborough, TN
- Registered: 2007-01-26
- Posts: 1,938
- Website
Re: KDE works fine, Gnome crashes.
Are you sure? According to http://www.geforce.com/drivers, 343.xx will work just fine, and the beta 346.xx is supposed to work as well.
Have you followed the Bumblebee setup in the Wiki? That has information about setting up your Optimus system to use the switchable features of Intel + nVidia. If you want to ONLY use your nVidia card, see the Wiki article on Optimus. It seems that the drivers are not set up correctly, as this is similar to my issue last year with an Optimus system. Is Bumblebee installed? If not, I am pretty sure you can't have BOTH Intel and nVidia drivers installed. What is in your xorg.conf file?
And finally, before you do anything more -- if (a BIG IF) your machine is similar to my previous laptop, the latest Gnome (3.14) would NOT work on my machine and KDE would. I never figured out what the issue was, I just moved to OpenBox (something I had wanted to do anyway). But my perfectly-working, Bumblebee/Optimus machine quit running Gnome when it moved to 3.14.
Last edited by mrunion (2014-12-05 00:41:44)
Matt
"It is very difficult to educate the educated."
Offline
#10 2014-12-05 10:37:16
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
Re: KDE works fine, Gnome crashes.
I tried the Optimus solution.... Nothing.... I tried bumblebee.... Black screen... I am frustrated.... The thing is that I love gnome.... Because I have lost count what I have installed and what I have removed I will do a clean install AGAIN and then pray.....
mrunion wrote:
I just moved to OpenBox
Is the GUI similar to Gnome's? What's your opinion?
By the way, at the display manager section here https://wiki.archlinux.org/index.php/NV … y_Managers why doesnt it have a section for GDM?
And third i followed the instructions here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA but when I run
#pacman -S mesa-dri xf86-video-intel bumblebee nvidia I get a conflinct that mesa-libgl is in conflict wih nvidia-libgl. But for that I am not quite sure yet because I had installed and removed so many packages that I don't know whats on my system now...
I will make a clean install, try Optimus, another clean install and try Bumblebee so I can tell for sure what's working,what's conflicting and not..
One last thing.. Reading the solution provided here https://wiki.archlinux.org/index.php/NVIDIA_Optimus what I understand is that you set up your system to use ONLY your nvidia graphics card. Am I correct?
Offline
#11 2014-12-06 00:43:41
- mrunion
- Member
- From: Jonesborough, TN
- Registered: 2007-01-26
- Posts: 1,938
- Website
Re: KDE works fine, Gnome crashes.
1) I don't know why GDM isn't listed. I hadn't noticed it.
2) If mesa-dri is already installed, you'll have to remove it and reinstall it with the command you indicated, as far as I know.
3) Yes, I only use the nVidia card. My firmware doesn't have the option to disable my Intel card, so I use a combination of xrandr and xorg.conf as stated in the Wiki.
I have used Gnome since 1998 until very early this year. I just liked it. But after Gnome started going all "wonky" and it becase a fight, I just decided to use OpenBox and set things up MY way. I honestly like it better, but it did take a bit of getting used to. But I am happy. Also, though I've never been a big fan of KDE, when Plasma 5 and all that finally get to a released and useable state, I am going to see how I like it.
(And as for the frustration, I definitely get that! I fought mine off and on for DAYS before I finally got to the point where it sunk in my think skull and I got things to run.)
P.S. I forgot to mention that I use SDDM, as that is what KDE 5 uses. There are instructions on the Optimus page for setting that up if you decide to go nVidia only.)
Last edited by mrunion (2014-12-07 02:50:10)
Matt
"It is very difficult to educate the educated."
Offline
#12 2014-12-06 08:02:33
- dbit87
- Member
- Registered: 2011-12-15
- Posts: 7
Re: KDE works fine, Gnome crashes.
I liked gnome 2 better to tell the truth. When you say ptimux toe mean Optimus right? I guess that's a typo. I'll give a shot Optimus+openbox+sddm and see how it works. I know Openbox wants a lot of configuration but I believe that it will worth it. I'll have a system optimized for my needs. Thanks a lot for your help guys.
May God have mercy on my soul...
Offline
#13 2014-12-07 02:51:28
- mrunion
- Member
- From: Jonesborough, TN
- Registered: 2007-01-26
- Posts: 1,938
- Website
Re: KDE works fine, Gnome crashes.
dbit87 wrote:
When you say ptimux toe mean Optimus right?
You are correct. I have fixed the post, and will try not to type when I should sleep! Thanks for catching that typo!
Matt
"It is very difficult to educate the educated."
Offline