Arch Linux

leosw

Member

Registered: 2014-01-22

Posts: 23

[pkgbuild request] validity vfs0050 libfprint

Hello world.

Is that possible to do an AUR package for this fork of libfprint : https://github.com/payden/libfprint
It works fine in my case : https://wiki.archlinux.org/index.php/HP_Envy_15

I just used this package : https://aur.archlinux.org/packages/libfprint-git/
And I edited the pkgbuild to have correct git repo and files md5 sums.

ISome infos about the sensor : lsusb -v

Bus 003 Device 004: ID 138a:0050 Validity Sensors, Inc. Swipe Fingerprint Sensor
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass        16 
  bDeviceProtocol       255 
  bMaxPacketSize0         8
  idVendor           0x138a Validity Sensors, Inc.
  idProduct          0x0050 Swipe Fingerprint Sensor
  bcdDevice            0.60
  iManufacturer           0 
  iProduct                0 
  iSerial                 1 251100a07ab5
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               4
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

Léo

Slithery

Administrator

From: Norfolk, UK

Registered: 2013-12-01

Posts: 5,776

Re: [pkgbuild request] validity vfs0050 libfprint

I just used this package : https://aur.archlinux.org/packages/libfprint-git/
And I edited the pkgbuild to have correct git repo and files md5 sums.

So you've already written the pkgbuild, why not upload it to the AUR yourself instead of asking someone to repeat the work you've already done...

---

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles