Arch Linux

ilkyest

Member

From: Brazil

Registered: 2010-02-13

Posts: 269

Gadgets to see hdd temps [solved]

Helo pals...

I've installed superkaramba, smartmontools and hddtemp, however, I can't read the temps.

These are my HDD

[    4.503663] scsi host17: ioc1: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=23
[    4.504191] scsi 16:0:0:0: Direct-Access     MAXTOR   ATLAS10K4_36SCA  DFV0 PQ: 0 ANSI: 3
[    4.504202] scsi target16:0:0: Beginning Domain Validation
[    5.134904] scsi target16:0:0: Ending Domain Validation
[    5.134966] scsi target16:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
[    5.139848] scsi 16:0:1:0: Direct-Access     COMPAQ   BD03686223       HPB6 PQ: 0 ANSI: 3
[    5.139856] scsi target16:0:1: Beginning Domain Validation
[    5.165008] scsi target16:0:1: Ending Domain Validation
[    5.165070] scsi target16:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127)
[    5.170446] scsi 16:0:2:0: Direct-Access     COMPAQ   BD03686223       HPB6 PQ: 0 ANSI: 3
[    5.170453] scsi target16:0:2: Beginning Domain Validation
[    5.195578] scsi target16:0:2: Ending Domain Validation
[    5.195640] scsi target16:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns, offset 127)
[    5.198967] scsi 16:0:3:0: Direct-Access     IBM-ESXS MAN3735MC     F  5408 PQ: 0 ANSI: 3
[    5.198974] scsi target16:0:3: Beginning Domain Validation
[    5.211598] scsi target16:0:3: Ending Domain Validation
[    5.211661] scsi target16:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[    5.215084] scsi 16:0:4:0: Direct-Access     IBM-ESXS MAN3735MC     F  5408 PQ: 0 ANSI: 3
[    5.215092] scsi target16:0:4: Beginning Domain Validation
[    5.227678] scsi target16:0:4: Ending Domain Validation
[    5.227740] scsi target16:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[    5.231076] scsi 16:0:5:0: Direct-Access     IBM-ESXS MAN3735MC     F  5408 PQ: 0 ANSI: 3
[    5.231083] scsi target16:0:5: Beginning Domain Validation
[    5.243529] scsi target16:0:5: Ending Domain Validation
[    5.243591] scsi target16:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)

And I should look closely to their temps, cause they are SCSI ones, that "as normal using" get hots.

Last edited by ilkyest (2015-01-06 00:52:11)

desaparecido

Member

From: Liège, Belgium

Registered: 2010-03-14

Posts: 155

Re: Gadgets to see hdd temps [solved]

did you edit your

/usr/lib/systemd/system/hddtemp.service

file ? can you read with hddtemp command ?

---

KF5 & Plasma5 (git versions) - Awesome WM
ASUS Sabertooth 990FX - AMD FX8350 - ATI Radeon HD 7970
[testing] repo

ilkyest

Member

From: Brazil

Registered: 2010-02-13

Posts: 269

Re: Gadgets to see hdd temps [solved]

This is my "hddtemp.service"

[Unit]
Description=Hard drive temperature monitor daemon

[Service]
ExecStart=/usr/bin/hddtemp -dF /dev/sda

[Install]
WantedBy=multi-user.target

Ok.. added

Now, with telnet I can "listen" it, but, trying discover how put on my "sensors viewer"

|/dev/sda|SAMSUNG HD250HJ|32|C||/dev/sdb|SAMSUNG HD250HJ|32|C||/dev/sdc|MAXTOR ATLAS10K4_36SCA|38|C||/dev/sdd|COMPAQ BD03686223|39|C||/dev/sde|COMPAQ BD03686223|39|C||/dev/sdf|IBM-ESXSMAN3735MC F|39|C||/dev/sdg|IBM-ESXSMAN3735MC F|45|C||/dev/sdh|IBM-ESXSMAN3735MC F|42|C|Connection closed by foreign host.

Okay, gkrellm now did it

Last edited by ilkyest (2015-01-06 00:51:24)

desaparecido

Member

From: Liège, Belgium

Registered: 2010-03-14

Posts: 155

Re: Gadgets to see hdd temps [solved]

This is my "hddtemp.service"

[Unit]
Description=Hard drive temperature monitor daemon

[Service]
ExecStart=/usr/bin/hddtemp -dF /dev/sda

[Install]
WantedBy=multi-user.target

I should put all my hard disks on "execstart" line?

And how I do to my "gadgets" or, my monitoring tools acces it?

yes, you need to add yours disks (eg: in my case I added /dev/sdb /dev/sdc too) and start and enable the systemd service.

I don't use superkaramba anymore but usually you need edit in

~/.kde4/share/apps/superkaramba/themes/yourtheme/somefile

...somefile sometimes is *.theme and sometimes you have a README file with instructions

did you can try with plamoids HDD in KDE4?, I remember than read hddtemp too, I don't use KDE4 anymore so I can't test it

---

KF5 & Plasma5 (git versions) - Awesome WM
ASUS Sabertooth 990FX - AMD FX8350 - ATI Radeon HD 7970
[testing] repo

ilkyest

Member

From: Brazil

Registered: 2010-02-13

Posts: 269

Re: Gadgets to see hdd temps [solved]

gkrellm did it, after restart the daemons, thanks

https://wiki.archlinux.org/index.php/Hddtemp

Last edited by ilkyest (2015-01-06 00:52:32)