You are not logged in.

#51 2015-11-03 19:44:10

9233
Member
Registered: 2015-02-01
Posts: 36

Re: [SOLVED] lm-sensors bricked my display?

jaruj9 wrote:

gives no result.

Do I have to open the computer and reinsert Battery?  As u know is not accessible from outside.

I am looking forward for any further help thank you again!!!!

Ok, so I tried it myself and it seems like the i2c-dev module isn't loaded automatically anymore.

# modprobe i2c-dev

After this, /dev/i2c-6 was available for me.
Hope this helps

Offline

#52 2015-11-03 19:56:28

jaruj9
Member
Registered: 2015-11-03
Posts: 4

Re: [SOLVED] lm-sensors bricked my display?

9233 wrote:
# modprobe i2c-dev

After this, /dev/i2c-6 was available for me.
Hope this helps

Thank you very much. It did help!

Not when i run either

sudo i2cget -y 6 0x4f 175

or

sudo i2cget -y 6 0x4f 177

screen gets back but after reboot it is bricked again.

Sorry for my inpatient. command

sudo i2cget -y 6 0x4f 176

fixed it!!!!!

Thank you very much for your time, you are my today hero!

Last edited by jaruj9 (2015-11-03 19:59:35)

Offline

#53 2015-11-03 20:10:41

9233
Member
Registered: 2015-02-01
Posts: 36

Re: [SOLVED] lm-sensors bricked my display?

jaruj9 wrote:

Sorry for my inpatient. command

sudo i2cget -y 6 0x4f 176

fixed it!!!!!

Thank you very much for your time, you are my today hero!

I'm glad that I could help.
I updated the lm-sensors wiki article, added a warning and linked to this thread to prevent future victims wink
Just out of interest:  What exact model of Y50 do you have? The "old" ones (860m graphics and TN panel) or the new ones with IPS panels?
Would like to know if this only affects this exact TN panel that i had in my Y50 or all of them.

Last edited by 9233 (2015-11-03 20:11:03)

Offline

#54 2015-11-03 20:12:19

jaruj9
Member
Registered: 2015-11-03
Posts: 4

Re: [SOLVED] lm-sensors bricked my display?

9233 wrote:

I'm glad that I could help.
I updated the lm-sensors wiki article, added a warning and linked to this thread to prevent future victims wink
Just out of interest:  What exact model of Y50 do you have? The "old" ones (860m graphics and TN panel) or the new ones with IPS panels?
Would like to know if this only affects this exact TN panel that i had in my Y50 or all of them.

The old one. It is already 1.5 year old and yes with TN panel and 860m.

Thank you again!!

Offline

#55 2015-11-03 20:15:30

9233
Member
Registered: 2015-02-01
Posts: 36

Re: [SOLVED] lm-sensors bricked my display?

jaruj9 wrote:

The old one. It is already 1.5 year old and yes with TN panel and 860m.

Thank you again!!

Okay thanks, I was curious to know if the new ones are affected too, but I doubt I'm willing to find out by trying wink
Have a nice day!

Offline

#56 2015-11-03 20:19:37

mich41
Member
Registered: 2012-06-22
Posts: 796

Re: [SOLVED] lm-sensors bricked my display?

You need the same i2c modules you used to damage the display in the first place, i.e. i2c-dev and possibly some bus controller driver. Not eeprom.

Messing with RTC battery is pointless, as the "P" in EEPROM stands for "persistent".

Offline

#57 2015-11-03 20:36:29

9233
Member
Registered: 2015-02-01
Posts: 36

Re: [SOLVED] lm-sensors bricked my display?

mich41 wrote:

You need the same i2c modules you used to damage the display in the first place, i.e. i2c-dev and possibly some bus controller driver. Not eeprom.

Messing with RTC battery is pointless, as the "P" in EEPROM stands for "persistent".

Oh, thanks for clarifying!

Offline

#58 2015-11-03 22:22:05

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [SOLVED] lm-sensors bricked my display?

mich41 wrote:

as the "P" in EEPROM stands for "persistent".

No it doesn't...

Electrically Erasable Programmable Read-Only Memory

Last edited by Slithery (2015-11-03 22:26:03)


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#59 2015-11-03 22:26:27

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,085

Re: [SOLVED] lm-sensors bricked my display?

And not all parameters are stored in EEPROM.   Often it is NVRAM  (Non Volatile Random Access Memory)  -- this may be nothing more than CMOS static RAM backed up by (wait for it) a battery big_smile


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#60 2015-11-04 08:00:05

mich41
Member
Registered: 2012-06-22
Posts: 796

Re: [SOLVED] lm-sensors bricked my display?

slithery wrote:
mich41 wrote:

as the "P" in EEPROM stands for "persistent".

No it doesn't...

Oops...

ewaller wrote:

And not all parameters are stored in EEPROM.   Often it is NVRAM  (Non Volatile Random Access Memory)  -- this may be nothing more than CMOS static RAM backed up by (wait for it) a battery big_smile

Go ahead and try.  Half the princess and kingdom's hand if you manage to reset such panel by removing power for less than 20 years tongue

Offline

#61 2016-02-06 17:14:55

testegw
Member
Registered: 2016-02-06
Posts: 1

Re: [SOLVED] lm-sensors bricked my display?

Thxx Guysss!!!! my graphicals 970m

Offline

Board footer

Powered by FluxBB