You are not logged in.

Pages: 1

#1 2015-02-18 20:58:41

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

[SOLVED] I can not run X Server

Hi there, I installed Arch Linux today, but I cannot run X server. I followed this tutorial: https://wiki.archlinux.org/index.php/Xorg
My notebook has a SiS chipset. I installed xf86-video-sis and xf86-video-sisusb. I copied /etc/X11/xorg.conf from https://wiki.archlinux.org/index.php/SiS
My /etc/X11/xorg.conf.d/10-monitor.conf looks like this:


Section "Monitor"
    Identifier		"Monitor0"
EndSection

Section "Device"
    Identifier		"Device0"
    Driver		"sis"
    BusID		"PCI:1:0:0"
EndSection

Section "Screen"
    Identifier		"Screen0"
    Device		"Device0"
    Monitor		"Monitor0"
    DefaultDepth	16
    SubSection "Display"
	Depth 16
	Modes "1024x768_75.00"
    EndSubSection
EndSection

When I try to execute startx, I get the following error (I don't run it as root):

(EE) Server terminated with error (1). Closing file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

The file /var/log/Xorg.0.log looks like this:

[ 13341.882] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 13341.965] X Protocol Version 11, Revision 0
[ 13341.993] Build Operating System: Linux 3.17.6-1-ARCH i686 
[ 13342.048] Current Operating System: Linux antWorkstation 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[ 13342.049] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4783374f-ae16-4753-a16e-deb121991926 rw quiet
[ 13342.131] Build Date: 11 February 2015  08:29:54AM
[ 13342.156]  
[ 13342.181] Current version of pixman: 0.32.6
[ 13342.231] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 13342.232] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13342.335] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 18 21:43:53 2015
[ 13342.361] (==) Using config file: "/etc/X11/xorg.conf"
[ 13342.388] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13342.415] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13342.416] (==) No Layout section.  Using the first Screen section.
[ 13342.416] (**) |-->Screen "Screen0" (0)
[ 13342.416] (**) |   |-->Monitor "Monitor0"
[ 13342.416] (**) |   |-->Device "Device0"
[ 13342.416] (==) Automatically adding devices
[ 13342.416] (==) Automatically enabling devices
[ 13342.416] (==) Automatically adding GPU devices
[ 13342.416] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 13342.416] 	Entry deleted from font path.
[ 13342.416] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 13342.416] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13342.416] 	Entry deleted from font path.
[ 13342.416] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13342.416] 	Entry deleted from font path.
[ 13342.416] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13342.416] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13342.416] 	Entry deleted from font path.
[ 13342.416] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13342.416] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[ 13342.416] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13342.416] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13342.416] (II) Loader magic: 0x829e6c0
[ 13342.416] (II) Module ABI versions:
[ 13342.416] 	X.Org ANSI C Emulation: 0.4
[ 13342.416] 	X.Org Video Driver: 19.0
[ 13342.416] 	X.Org XInput driver : 21.0
[ 13342.416] 	X.Org Server Extension : 9.0
[ 13342.419] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 13342.420] (--) PCI:*(0:1:0:0) 1039:6351:1734:1125 rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128
[ 13342.420] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13342.420] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 13342.420] (II) LoadModule: "dbe"
[ 13342.420] (II) Module "dbe" already built-in
[ 13342.420] (II) LoadModule: "i2c"
[ 13342.420] (II) Module "i2c" already built-in
[ 13342.420] (II) LoadModule: "ddc"
[ 13342.420] (II) Module "ddc" already built-in
[ 13342.420] (II) LoadModule: "dri"
[ 13342.420] (II) Module "dri" already built-in
[ 13342.420] (II) LoadModule: "extmod"
[ 13342.420] (II) Module "extmod" already built-in
[ 13342.420] (II) LoadModule: "glx"
[ 13342.421] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13342.422] (II) Module glx: vendor="X.Org Foundation"
[ 13342.422] 	compiled for 1.17.1, module version = 1.0.0
[ 13342.422] 	ABI class: X.Org Server Extension, version 9.0
[ 13342.422] (==) AIGLX enabled
[ 13342.422] (II) LoadModule: "int10"
[ 13342.423] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 13342.423] (II) Module int10: vendor="X.Org Foundation"
[ 13342.423] 	compiled for 1.17.1, module version = 1.0.0
[ 13342.423] 	ABI class: X.Org Video Driver, version 19.0
[ 13342.423] (II) LoadModule: "vbe"
[ 13342.423] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 13342.423] (II) Module vbe: vendor="X.Org Foundation"
[ 13342.423] 	compiled for 1.17.1, module version = 1.1.0
[ 13342.423] 	ABI class: X.Org Video Driver, version 19.0
[ 13342.423] (II) LoadModule: "sis"
[ 13342.423] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
[ 13342.423] (II) Module sis: vendor="X.Org Foundation"
[ 13342.423] 	compiled for 1.17.0, module version = 0.10.7
[ 13342.423] 	Module class: X.Org Video Driver
[ 13342.423] 	ABI class: X.Org Video Driver, version 19.0
[ 13342.423] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
[ 13342.424] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
[ 13342.424] (++) using VT number 1

[ 13342.424] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 13342.424] (WW) Falling back to old probe method for sis
[ 13342.424] (EE) No devices detected.
[ 13342.424] (EE) 
Fatal server error:
[ 13342.424] (EE) no screens found(EE) 
[ 13342.424] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[ 13342.424] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 13342.424] (EE)

I would be very greatful if anybody could help me.

Last edited by amethystAnt (2015-02-20 21:03:15)

Offline

#2 2015-02-18 21:19:02

Head_on_a_Stick
Member
From: The Wirral
Registered: 2014-02-20
Posts: 8,999
Website

Re: [SOLVED] I can not run X Server

It seems that SiS wiki page is rather old (it refers to rc.conf & kernel 3.7) -- have you tried running without an xorg configuration file?

Please post the output of:

lspci -knn|grep -iA3 vga

Jin, Jîyan, Azadî

Offline

#3 2015-02-18 22:00:49

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

Head_on_a_Stick wrote:

have you tried running without an xorg configuration file?

Now I removed the 50-monitor.conf file and xorg.conf file and startx ran almost successfully, but there is still one big issue- it has a small display resolution (640*480), although my resolution should be 1028*768. The log now looks like this (by the way, thank you for answer):

[   208.922] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[   208.952] X Protocol Version 11, Revision 0
[   208.964] Build Operating System: Linux 3.17.6-1-ARCH i686 
[   208.990] Current Operating System: Linux antWorkstation 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[   208.991] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4783374f-ae16-4753-a16e-deb121991926 rw quiet
[   209.038] Build Date: 11 February 2015  08:29:54AM
[   209.055]  
[   209.072] Current version of pixman: 0.32.6
[   209.110] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   209.111] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   209.200] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 18 22:44:38 2015
[   209.224] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   209.225] (==) No Layout section.  Using the first Screen section.
[   209.225] (==) No screen section available. Using defaults.
[   209.225] (**) |-->Screen "Default Screen Section" (0)
[   209.225] (**) |   |-->Monitor "<default monitor>"
[   209.225] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   209.225] (==) Automatically adding devices
[   209.225] (==) Automatically enabling devices
[   209.225] (==) Automatically adding GPU devices
[   209.225] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[   209.225] 	Entry deleted from font path.
[   209.225] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[   209.225] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   209.225] 	Entry deleted from font path.
[   209.225] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   209.225] 	Entry deleted from font path.
[   209.225] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   209.225] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   209.225] 	Entry deleted from font path.
[   209.225] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   209.225] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[   209.225] (==) ModulePath set to "/usr/lib/xorg/modules"
[   209.225] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   209.225] (II) Loader magic: 0x829e6c0
[   209.225] (II) Module ABI versions:
[   209.225] 	X.Org ANSI C Emulation: 0.4
[   209.225] 	X.Org Video Driver: 19.0
[   209.225] 	X.Org XInput driver : 21.0
[   209.225] 	X.Org Server Extension : 9.0
[   209.228] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   209.229] (--) PCI:*(0:1:0:0) 1039:6351:1734:1125 rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128
[   209.229] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   209.229] (II) LoadModule: "glx"
[   209.230] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   209.231] (II) Module glx: vendor="X.Org Foundation"
[   209.232] 	compiled for 1.17.1, module version = 1.0.0
[   209.232] 	ABI class: X.Org Server Extension, version 9.0
[   209.232] (==) AIGLX enabled
[   209.232] (==) Matched sis as autoconfigured driver 0
[   209.232] (==) Matched modesetting as autoconfigured driver 1
[   209.232] (==) Matched fbdev as autoconfigured driver 2
[   209.232] (==) Matched vesa as autoconfigured driver 3
[   209.232] (==) Assigned the driver to the xf86ConfigLayout
[   209.232] (II) LoadModule: "sis"
[   209.232] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
[   209.232] (II) Module sis: vendor="X.Org Foundation"
[   209.232] 	compiled for 1.17.0, module version = 0.10.7
[   209.232] 	Module class: X.Org Video Driver
[   209.232] 	ABI class: X.Org Video Driver, version 19.0
[   209.232] (II) LoadModule: "modesetting"
[   209.232] (WW) Warning, couldn't open module modesetting
[   209.232] (II) UnloadModule: "modesetting"
[   209.232] (II) Unloading modesetting
[   209.232] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   209.232] (II) LoadModule: "fbdev"
[   209.233] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   209.233] (II) Module fbdev: vendor="X.Org Foundation"
[   209.233] 	compiled for 1.17.0, module version = 0.4.4
[   209.233] 	Module class: X.Org Video Driver
[   209.233] 	ABI class: X.Org Video Driver, version 19.0
[   209.233] (II) LoadModule: "vesa"
[   209.233] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   209.233] (II) Module vesa: vendor="X.Org Foundation"
[   209.233] 	compiled for 1.17.0, module version = 2.3.2
[   209.233] 	Module class: X.Org Video Driver
[   209.233] 	ABI class: X.Org Video Driver, version 19.0
[   209.233] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
[   209.233] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
[   209.233] (II) FBDEV: driver for framebuffer: fbdev
[   209.233] (II) VESA: driver for VESA chipsets: vesa
[   209.233] (++) using VT number 1

[   209.233] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   209.233] (WW) Falling back to old probe method for sis
[   209.234] (--) Assigning device section with no busID to primary device
[   209.234] (II) Loading sub module "fbdevhw"
[   209.234] (II) LoadModule: "fbdevhw"
[   209.234] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   209.246] (II) Module fbdevhw: vendor="X.Org Foundation"
[   209.246] 	compiled for 1.17.1, module version = 0.0.2
[   209.246] 	ABI class: X.Org Video Driver, version 19.0
[   209.246] (**) FBDEV(0): claimed PCI slot 1@0:0:0
[   209.246] (II) FBDEV(0): using default device
[   209.246] (WW) Falling back to old probe method for vesa
[   209.246] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   209.246] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[   209.246] (==) FBDEV(0): RGB weight 888
[   209.246] (==) FBDEV(0): Default visual is TrueColor
[   209.246] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[   209.246] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB)
[   209.246] (II) FBDEV(0): checking modes against framebuffer device...
[   209.246] (II) FBDEV(0): checking modes against monitor...
[   209.246] (--) FBDEV(0): Virtual size is 640x480 (pitch 640)
[   209.246] (**) FBDEV(0):  Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[   209.246] (II) FBDEV(0): Modeline "current"x0.0   30.72  640 672 752 832  480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[   209.246] (==) FBDEV(0): DPI set to (96, 96)
[   209.246] (II) Loading sub module "fb"
[   209.246] (II) LoadModule: "fb"
[   209.247] (II) Loading /usr/lib/xorg/modules/libfb.so
[   209.249] (II) Module fb: vendor="X.Org Foundation"
[   209.249] 	compiled for 1.17.1, module version = 1.0.0
[   209.249] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   209.249] (**) FBDEV(0): using shadow framebuffer
[   209.249] (II) Loading sub module "shadow"
[   209.249] (II) LoadModule: "shadow"
[   209.250] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   209.253] (II) Module shadow: vendor="X.Org Foundation"
[   209.253] 	compiled for 1.17.1, module version = 1.1.0
[   209.253] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   209.253] (II) UnloadModule: "sis"
[   209.253] (II) Unloading sis
[   209.254] (II) UnloadModule: "vesa"
[   209.254] (II) Unloading vesa
[   209.254] (==) Depth 24 pixmap format is 32 bpp
[   209.254] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   209.281] (==) FBDEV(0): Backing store enabled
[   209.282] (==) FBDEV(0): DPMS enabled
[   209.282] (==) RandR enabled
[   209.294] (II) AIGLX: Screen 0 is not DRI2 capable
[   209.294] (EE) AIGLX: reverting to software rendering
[   210.133] (II) AIGLX: Loaded and initialized swrast
[   210.133] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   210.400] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   210.400] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   210.400] (II) LoadModule: "evdev"
[   210.400] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   210.411] (II) Module evdev: vendor="X.Org Foundation"
[   210.411] 	compiled for 1.16.2, module version = 2.9.1
[   210.411] 	Module class: X.Org XInput Driver
[   210.411] 	ABI class: X.Org XInput driver, version 21.0
[   210.412] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 13 paused 0
[   210.412] (II) Using input driver 'evdev' for 'Power Button'
[   210.412] (**) Power Button: always reports core events
[   210.412] (**) evdev: Power Button: Device: "/dev/input/event5"
[   210.412] (--) evdev: Power Button: Vendor 0 Product 0x1
[   210.412] (--) evdev: Power Button: Found keys
[   210.412] (II) evdev: Power Button: Configuring as keyboard
[   210.412] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[   210.412] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   210.412] (**) Option "xkb_rules" "evdev"
[   210.412] (**) Option "xkb_model" "pc104"
[   210.412] (**) Option "xkb_layout" "us"
[   210.444] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   210.444] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   210.444] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
[   210.444] (II) Using input driver 'evdev' for 'Video Bus'
[   210.445] (**) Video Bus: always reports core events
[   210.445] (**) evdev: Video Bus: Device: "/dev/input/event2"
[   210.445] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   210.445] (--) evdev: Video Bus: Found keys
[   210.445] (II) evdev: Video Bus: Configuring as keyboard
[   210.445] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6/event2"
[   210.445] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   210.445] (**) Option "xkb_rules" "evdev"
[   210.445] (**) Option "xkb_model" "pc104"
[   210.445] (**) Option "xkb_layout" "us"
[   210.445] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   210.445] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   210.446] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[   210.446] (II) Using input driver 'evdev' for 'Power Button'
[   210.446] (**) Power Button: always reports core events
[   210.446] (**) evdev: Power Button: Device: "/dev/input/event3"
[   210.446] (--) evdev: Power Button: Vendor 0 Product 0x1
[   210.446] (--) evdev: Power Button: Found keys
[   210.446] (II) evdev: Power Button: Configuring as keyboard
[   210.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event3"
[   210.446] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   210.446] (**) Option "xkb_rules" "evdev"
[   210.446] (**) Option "xkb_model" "pc104"
[   210.446] (**) Option "xkb_layout" "us"
[   210.447] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   210.447] (II) No input driver specified, ignoring this device.
[   210.447] (II) This device may have been added with another device file.
[   210.447] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   210.447] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   210.448] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 16 paused 0
[   210.448] (II) Using input driver 'evdev' for 'Sleep Button'
[   210.448] (**) Sleep Button: always reports core events
[   210.448] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[   210.448] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   210.448] (--) evdev: Sleep Button: Found keys
[   210.448] (II) evdev: Sleep Button: Configuring as keyboard
[   210.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event4"
[   210.448] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   210.448] (**) Option "xkb_rules" "evdev"
[   210.449] (**) Option "xkb_model" "pc104"
[   210.449] (**) Option "xkb_layout" "us"
[   210.449] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[   210.449] (II) No input driver specified, ignoring this device.
[   210.449] (II) This device may have been added with another device file.
[   210.450] (II) config/udev: Adding input device HDA SIS966 Mic (/dev/input/event9)
[   210.450] (II) No input driver specified, ignoring this device.
[   210.450] (II) This device may have been added with another device file.
[   210.450] (II) config/udev: Adding input device HDA SIS966 Headphone (/dev/input/event10)
[   210.450] (II) No input driver specified, ignoring this device.
[   210.450] (II) This device may have been added with another device file.
[   210.450] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   210.450] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   210.451] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 17 paused 0
[   210.451] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   210.451] (**) AT Translated Set 2 keyboard: always reports core events
[   210.451] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   210.451] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   210.451] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   210.451] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   210.451] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   210.451] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   210.451] (**) Option "xkb_rules" "evdev"
[   210.451] (**) Option "xkb_model" "pc104"
[   210.451] (**) Option "xkb_layout" "us"
[   210.452] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[   210.452] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   210.452] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   210.452] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   210.452] (II) LoadModule: "synaptics"
[   210.452] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   210.453] (II) Module synaptics: vendor="X.Org Foundation"
[   210.453] 	compiled for 1.16.0, module version = 1.8.1
[   210.453] 	Module class: X.Org XInput Driver
[   210.453] 	ABI class: X.Org XInput driver, version 21.0
[   210.453] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 18 paused 0
[   210.453] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   210.453] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   210.454] (**) Option "Device" "/dev/input/event7"
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 68)
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 93)
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   210.506] (**) Option "TapButton1" "1"
[   210.506] (**) Option "TapButton2" "2"
[   210.506] (**) Option "TapButton3" "3"
[   210.506] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   210.506] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   210.507] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event7"
[   210.507] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[   210.507] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   210.507] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   210.507] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[   210.507] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   210.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   210.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   210.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   210.507] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   210.507] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   210.507] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   210.508] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   210.508] (II) No input driver specified, ignoring this device.
[   210.508] (II) This device may have been added with another device file.
[   210.512] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   224.892] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   224.992] (EE) FBDEV(0): FBIOBLANK: Invalid argument

Last edited by amethystAnt (2015-02-18 22:14:33)

Offline

#4 2015-02-18 22:54:28

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,583

Re: [SOLVED] I can not run X Server

It is using the Frame Buffer.  Generally not the best choice tongue

What video drivers have you installed.  Check with pacman -Qs xf86-video.  I use Inel.

ewaller@odin ~ [1]1005 %pacman -Qs xf86-video
local/xf86-video-intel 2.99.917-1 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
ewaller@odin ~ 1006 %

What video chipset have you?  (check with lspci -nn )

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#5 2015-02-19 08:44:04

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

ewaller wrote:

What video drivers have you installed.  Check with pacman -Qs xf86-video.  I use Inel. What video chipset have you?  (check with lspci -nn )

As I said in the original post, I have a SiS chipset. I have installed all xf86-video-* drivers, including xf86-video-sis. Now I tried to remove the frame buffer (xf86-video-fbdev) and the X sever failed to start again. It seems like the sis driver does not work.

Offline

#6 2015-02-19 08:52:46

thearcherblog
Member
Registered: 2014-10-30
Posts: 165

Re: [SOLVED] I can not run X Server

Hello,

I do not know wghich graphic card you have, but I remember that I had lot of issues with sis long time ago. What saved my life was this package:

aur/xf86-video-sis671

Please, let us know which graphic card you have exactly.

Offline

#7 2015-02-19 09:17:27

Head_on_a_Stick
Member
From: The Wirral
Registered: 2014-02-20
Posts: 8,999
Website

Re: [SOLVED] I can not run X Server

Head_on_a_Stick wrote:

Please post the output of:

lspci -knn|grep -iA3 vga

Jin, Jîyan, Azadî

Offline

#8 2015-02-19 12:31:23

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

thearcherblog wrote:

What saved my life was this package:

aur/xf86-video-sis671

I tried to install it, but it fails when I try to build the package, it seems that this package is no longer available.

Head_on_a_Stick wrote:

    Please post the output of:

    lspci -knn|grep -iA3 vga

01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter [1039:6351] (rev 10)
        Subsystem: Fujitsu Technology Solutions Device [1734:1125]
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04)
        Subsystem: Qualcomm Atheros AR242x 802.11abg Wireless PCI Express Adapter (rev 01) [168c:3067]

Offline

#9 2015-02-19 13:20:58

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

Update: I successfully installed the suggested package (aur/xf86-video-671, or rather, xf86-video-671-git, which can be installed without any issues). When I type startx, it doesn't recognize the driver. I copied the 50-monitor.conf to /etc/X11/xorg.conf.d again and the string "sis" replaced by "sisimedia". Then, when I ran startx, I got a black screen and I had to turn my notebook off. (One second before my screen froze, a cursor in the right resolution appeared on the screen)

Last edited by amethystAnt (2015-02-19 13:21:32)

Offline

#10 2015-02-20 08:03:21

thearcherblog
Member
Registered: 2014-10-30
Posts: 165

Re: [SOLVED] I can not run X Server

We would like to help you but logs are necessary to do it.

Please, post the xorg log and let see if we can find the error. I know that this vga was really tricky. I remember that gaves me a lot of problems but... fortunately, I changed my laptop big_smile

Offline

#11 2015-02-20 08:34:46

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

thearcherblog wrote:

We would like to help you but logs are necessary to do it.

Please, post the xorg log and let see if we can find the error. I know that this vga was really tricky. I remember that gaves me a lot of problems but... fortunately, I changed my laptop big_smile

I'm sorry, that was a mistake when I didn't post the log. Here is the log that was generated when I used he sis671 driver and my screen got black (it is pretty long):

[   161.864] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[   161.876] X Protocol Version 11, Revision 0
[   161.882] Build Operating System: Linux 3.17.6-1-ARCH i686 
[   161.898] Current Operating System: Linux antWorkstation 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[   161.899] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4783374f-ae16-4753-a16e-deb121991926 rw quiet
[   161.933] Build Date: 11 February 2015  08:29:54AM
[   161.945]  
[   161.959] Current version of pixman: 0.32.6
[   161.989] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   161.990] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   162.066] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 20 09:16:57 2015
[   162.148] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   162.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   162.208] (==) No Layout section.  Using the first Screen section.
[   162.208] (**) |-->Screen "Screen0" (0)
[   162.208] (**) |   |-->Monitor "Monitor0"
[   162.209] (**) |   |-->Device "Device0"
[   162.209] (==) Automatically adding devices
[   162.209] (==) Automatically enabling devices
[   162.209] (==) Automatically adding GPU devices
[   162.260] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[   162.260] 	Entry deleted from font path.
[   162.260] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[   162.260] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   162.260] 	Entry deleted from font path.
[   162.260] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   162.260] 	Entry deleted from font path.
[   162.260] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   162.261] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   162.261] 	Entry deleted from font path.
[   162.261] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   162.261] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[   162.261] (==) ModulePath set to "/usr/lib/xorg/modules"
[   162.261] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   162.261] (II) Loader magic: 0x829e6c0
[   162.261] (II) Module ABI versions:
[   162.261] 	X.Org ANSI C Emulation: 0.4
[   162.261] 	X.Org Video Driver: 19.0
[   162.261] 	X.Org XInput driver : 21.0
[   162.261] 	X.Org Server Extension : 9.0
[   162.264] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   162.265] (--) PCI:*(0:1:0:0) 1039:6351:1734:1125 rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128
[   162.265] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   162.266] (II) LoadModule: "glx"
[   162.292] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   162.430] (II) Module glx: vendor="X.Org Foundation"
[   162.430] 	compiled for 1.17.1, module version = 1.0.0
[   162.430] 	ABI class: X.Org Server Extension, version 9.0
[   162.430] (==) AIGLX enabled
[   162.430] (II) LoadModule: "sisimedia"
[   162.442] (II) Loading /usr/lib/xorg/modules/drivers/sisimedia_drv.so
[   162.476] (II) Module sisimedia: vendor="X.Org Foundation"
[   162.476] 	compiled for 1.17.1, module version = 0.8.0
[   162.477] 	Module class: X.Org Video Driver
[   162.477] 	ABI class: X.Org Video Driver, version 19.0
[   162.478] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340,
	[M]670/[M]770[GX], [M]671/[M]771[GX]
[   162.478] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40/XG42)
[   162.478] (++) using VT number 1

[   162.478] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   162.478] (II) SIS_pci_probe - begin, entity_num=0
[   162.478] (II)                        vendor_id=0x1039
[   162.478] (II)                        device_id=0x6351
[   162.478] (II)                        bus=1
[   162.478] (II)                        dev=0
[   162.478] (II)                        func=0
[   162.478] (II) SIS_pci_probe - ConfigPciEntity found
[   162.478] (II) SIS(0): SIS_pci_probe - GetEntityInfo chipset is 0x6351
[   162.478] (II) SIS(0): SIS_pci_probe - end
[   162.478] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.17.1.0)
[   162.478] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[   162.478] (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
[   162.478] (II) SIS(0): *** for documentation, updates and a Premium Version.
[   162.478] (II) SIS(0): RandR rotation support not available in this version.
[   162.478] (II) SIS(0): Dynamic modelist support not available in this version.
[   162.478] (II) SIS(0): Screen growing support not available in this version.
[   162.478] (II) SIS(0): Advanced Xv video blitter not available in this version.
[   162.478] (II) SIS(0): Advanced MergedFB support not available in this version.
[   162.478] (--) SIS(0): sisfb not found
[   162.478] (--) SIS(0): Relocated I/O registers at 0x9000
[   162.480] (II) Loading sub module "ramdac"
[   162.480] (II) LoadModule: "ramdac"
[   162.480] (II) Module "ramdac" already built-in
[   162.480] (**) SIS(0): Depth 16, (--) framebuffer bpp 16
[   162.480] (==) SIS(0): RGB weight 565
[   162.480] (==) SIS(0): Default visual is TrueColor
[   162.481] (WW) SIS(0): Could not find/read video BIOS
[   162.481] (==) SIS(0): Color HW cursor is enabled
[   162.481] (II) SIS(0): Using VRAM command queue, size 512k
[   162.481] (==) SIS(0): Hotkey display switching is enabled
[   162.481] (==) SIS(0): SiSCtrl utility interface is disabled
[   162.481] (II) SIS(0): For information on SiSCtrl, see
		http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
[   162.481] (==) SIS(0): X server will not keep DPI constant for all screen sizes
[   162.481] (--) SIS(0): 262144K shared video RAM (UMA)
[   162.481] (--) SIS(0): DRAM type: DDR SDRAM
[   162.481] (--) SIS(0): Memory clock: 596.582 MHz
[   162.481] (--) SIS(0): DRAM bus width: 64 bit
[   162.481] (--) SIS(0): Linear framebuffer at 0xC0000000
[   162.481] (--) SIS(0): MMIO registers at 0xD4000000 (size 64K)
[   162.481] (--) SIS(0): VideoRAM: 262144 KB
[   162.481] (II) SIS(0): Using 20480K of framebuffer memory at offset 0K
[   162.481] (II) Loading sub module "ddc"
[   162.481] (II) LoadModule: "ddc"
[   162.481] (II) Module "ddc" already built-in
[   162.481] (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1)
[   164.398] (--) SIS(0): No CRT1/VGA detected
[   164.398] (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [ec2305])
[   164.398] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[   164.398] (II) SIS(0): CRT1 gamma correction is enabled
[   164.398] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
[   164.399] (II) SIS(0): CRT2 gamma correction is enabled
[   164.399] (--) SIS(0): Memory bandwidth at 16 bpp is 2386.33 MHz
[   164.399] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT2)
[   164.399] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1)
[   164.399] (--) SIS(0): 302LV/302ELV: Using EMI 0x6a0d7038 (LCD)
[   164.399] (--) SIS(0): CRT2 DDC probing failed
[   164.399] (==) SIS(0): Min pixel clock is 10 MHz
[   164.399] (--) SIS(0): Max pixel clock is 340 MHz
[   164.399] (II) SIS(0): Replaced entire mode list with built-in modes
[   164.399] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[   164.399] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[   164.399] (II) SIS(0): "Unknown reason" in the following list means that the mode
[   164.399] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[   164.399] (II) SIS(0): Monitor0: Using hsync range of 30.00-80.00 kHz
[   164.399] (II) SIS(0): Monitor0: Using vrefresh range of 59.00-61.00 Hz
[   164.399] (II) SIS(0): Monitor0: Using vrefresh value of 71.00 Hz
[   164.399] (II) SIS(0): Clock range:  10.00 to 340.00 MHz
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[   164.399] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[   164.399] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[   164.399] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
[   164.399] (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
[   164.399] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[   164.399] (II) SIS(0): Not using default mode "1366x768" (unknown reason)
[   164.399] (II) SIS(0): Not using mode "1024x768_75.00" (no mode of this name)
[   164.399] (--) SIS(0): Virtual size is 1280x800 (pitch 1280)
[   164.399] (**) SIS(0):  Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
[   164.399] (**) SIS(0):  Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
[   164.399] (**) SIS(0):  Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
[   164.399] (**) SIS(0):  Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
[   164.399] (==) SIS(0): DPI set to (96, 96)
[   164.399] (II) Loading sub module "fb"
[   164.399] (II) LoadModule: "fb"
[   164.400] (II) Loading /usr/lib/xorg/modules/libfb.so
[   164.445] (II) Module fb: vendor="X.Org Foundation"
[   164.445] 	compiled for 1.17.1, module version = 1.0.0
[   164.445] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   164.445] (II) Loading sub module "exa"
[   164.445] (II) LoadModule: "exa"
[   164.445] (II) Loading /usr/lib/xorg/modules/libexa.so
[   164.453] (II) Module exa: vendor="X.Org Foundation"
[   164.453] 	compiled for 1.17.1, module version = 2.6.0
[   164.453] 	ABI class: X.Org Video Driver, version 19.0
[   164.453] (II) Loading sub module "vbe"
[   164.453] (II) LoadModule: "vbe"
[   164.453] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   164.465] (II) Module vbe: vendor="X.Org Foundation"
[   164.465] 	compiled for 1.17.1, module version = 1.1.0
[   164.465] 	ABI class: X.Org Video Driver, version 19.0
[   164.465] (II) Loading sub module "int10"
[   164.465] (II) LoadModule: "int10"
[   164.465] (II) Loading /usr/lib/xorg/modules/libint10.so
[   164.471] (II) Module int10: vendor="X.Org Foundation"
[   164.471] 	compiled for 1.17.1, module version = 1.0.0
[   164.471] 	ABI class: X.Org Video Driver, version 19.0
[   164.471] (II) SIS(0): initializing int10
[   164.474] (EE) SIS(0): Cannot read int vect
[   164.474] (WW) SIS(0): Failed to load/initialize vbe module
[   164.481] (II) SIS(0): Setting standard mode 0x15
[   165.753] (II) EXA(0): Offscreen pixmap area of 18923520 bytes
[   165.753] (II) EXA(0): Driver registered support for the following operations:
[   165.753] (II)         Solid
[   165.753] (II)         Copy
[   165.753] (II)         UploadToScreen
[   165.753] (II)         DownloadFromScreen
[   165.753] (--) SIS(0): CPU frequency 1999.99Mhz
[   165.765] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[   165.814] (--) SIS(0): 	Checked libc memcpy()... 	53.4 MiB/s
[   165.909] (--) SIS(0): 	Checked built-in-1 memcpy()... 	26.7 MiB/s
[   166.024] (--) SIS(0): 	Checked built-in-2 memcpy()... 	22.0 MiB/s
[   166.072] (--) SIS(0): 	Checked MMX memcpy()... 	53.5 MiB/s
[   166.119] (--) SIS(0): 	Checked SSE memcpy()... 	53.5 MiB/s
[   166.167] (--) SIS(0): 	Checked MMX2 memcpy()... 	53.5 MiB/s
[   166.167] (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
[   166.167] (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
[   166.167] (--) SIS(0): CPU frequency 1999.99Mhz
[   166.179] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
[   166.241] (--) SIS(0): 	Checked libc memcpy()... 	43.2 MiB/s
[   166.346] (--) SIS(0): 	Checked built-in-1 memcpy()... 	24.9 MiB/s
[   166.451] (--) SIS(0): 	Checked built-in-2 memcpy()... 	25.1 MiB/s
[   166.509] (--) SIS(0): 	Checked MMX memcpy()... 	46.7 MiB/s
[   166.569] (--) SIS(0): 	Checked SSE memcpy()... 	44.3 MiB/s
[   166.637] (--) SIS(0): 	Checked MMX2 memcpy()... 	39.0 MiB/s
[   166.637] (--) SIS(0): Using MMX method for aligned data transfers from video RAM
[   166.637] (--) SIS(0): Using MMX method for unaligned data transfers from video RAM
[   166.637] (==) SIS(0): Backing store enabled
[   166.637] (==) SIS(0): Silken mouse enabled
[   166.640] (==) SIS(0): DPMS enabled
[   166.641] (--) SIS(0): Hardware supports one video overlay
[   166.641] (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2
[   166.641] PCI: CNF00 - CNF1B:
[   166.641] 	00: 00000000:00000000000000000000000000000000
[   166.641] 	04: 42004200:01000010000000000100001000000000
[   166.641] 	08: ffffffff:11111111111111111111111111111111
[   166.641] 	0c: ffffffff:11111111111111111111111111111111
[   166.641] 	10: b7143c00:10110111000101000011110000000000
[   166.641] 	14: 00008e0d:00000000000000001000111000001101
[   166.641] 	18: ffffffff:11111111111111111111111111111111
[   166.641] PCI: CNF2C - CNF47:
[   166.641] 	2c: ffffffff:11111111111111111111111111111111
[   166.641] 	30: ffffffff:11111111111111111111111111111111
[   166.641] 	34: ffffffff:11111111111111111111111111111111
[   166.641] 	38: ffffffff:11111111111111111111111111111111
[   166.641] 	3c: ffffffff:11111111111111111111111111111111
[   166.641] 	40: 01100420:00000001000100000000010000100000
[   166.641] 	44: 00ff4407:00000000111111110100010000000111
[   166.641] AGP: CNF50 - CNF5B:
[   166.641] 	50: 40134013:01000000000100110100000000010011
[   166.641] 	54: 40134013:01000000000100110100000000010011
[   166.641] 	58: 00000000:00000000000000000000000000000000
[   166.641] CRT1: SR05 - SR12:
[   166.641] 	05: a1:10100001
[   166.641] 	06: 42:01000010
[   166.641] 	07: 44:01000100
[   166.641] 	08: e0:11100000
[   166.641] 	09: 07:00000111
[   166.641] 	0a: 01:00000001
[   166.641] 	0b: 00:00000000
[   166.641] 	0c: 07:00000111
[   166.641] 	0d: 00:00000000
[   166.641] 	0e: 01:00000001
[   166.641] 	0f: 08:00001000
[   166.641] 	10: 29:00101001
[   166.641] 	11: 03:00000011
[   166.641] 	12: 00:00000000
[   166.641] CRT1: SR13 - SR16 (reserved):
[   166.641] 	13: 00:00000000
[   166.641] 	14: 00:00000000
[   166.641] 	15: 00:00000000
[   166.641] 	16: 00:00000000
[   166.641] CRT1: SR19 - SR1A (reserved)
[   166.641] CRT1: SR1B - SR3A:
[   166.641] 	1b: 00:00000000
[   166.641] 	1c: 8f:10001111
[   166.641] 	1d: 00:00000000
[   166.641] 	1e: 7a:01111010
[   166.641] 	1f: c0:11000000
[   166.641] 	20: a1:10100001
[   166.641] 	21: a3:10100011
[   166.641] 	22: f3:11110011
[   166.641] 	23: 00:00000000
[   166.641] 	24: 00:00000000
[   166.641] 	25: 00:00000000
[   166.641] 	26: 40:01000000
[   166.641] 	27: 1f:00011111
[   166.641] 	28: 7c:01111100
[   166.641] 	29: 05:00000101
[   166.641] 	2a: 82:10000010
[   166.641] 	2b: 1b:00011011
[   166.641] 	2c: e1:11100001
[   166.641] 	2d: 01:00000001
[   166.641] 	2e: 29:00101001
[   166.641] 	2f: 01:00000001
[   166.641] 	30: 82:10000010
[   166.641] 	31: 00:00000000
[   166.641] 	32: 50:01010000
[   166.641] 	33: 20:00100000
[   166.641] 	34: 00:00000000
[   166.641] 	35: 00:00000000
[   166.641] 	36: 00:00000000
[   166.642] 	37: 04:00000100
[   166.642] 	38: 86:10000110
[   166.642] 	39: 40:01000000
[   166.642] 	3a: 00:00000000
[   166.642] CRT1: SR3B (reserved)
[   166.642] CRT1: SR3C - SR3F:
[   166.642] 	3c: 08:00001000
[   166.642] 	3d: 01:00000001
[   166.642] 	3e: 00:00000000
[   166.642] 	3f: 00:00000000
[   166.642] CRT1: CR19 - CR1A:
[   166.642] 	19: 00:00000000
[   166.642] 	1a: 00:00000000
[   166.642] CRT1: CR1B - CR27 (undocumented?)
[   166.642] CRT1: CR28 - CR2E:
[   166.642] 	28: 04:00000100
[   166.642] 	29: e0:11100000
[   166.642] 	2a: 00:00000000
[   166.642] 	2b: 00:00000000
[   166.642] 	2c: 00:00000000
[   166.642] 	2d: 00:00000000
[   166.642] 	2e: 00:00000000
[   166.642] CRT1: CR2F (reserved)
[   166.642] VGA BIOS: CR30 - CR3F:
[   166.642] 	30: 21:00100001
[   166.642] 	31: 40:01000000
[   166.642] 	32: 08:00001000
[   166.642] 	33: 00:00000000
[   166.642] 	34: 15:00010101
[   166.642] 	35: 00:00000000
[   166.642] 	36: ec:11101100
[   166.642] 	37: 23:00100011
[   166.642] 	38: 20:00100000
[   166.642] 	39: 30:00110000
[   166.642] 	3a: 00:00000000
[   166.642] 	3b: 08:00001000
[   166.642] 	3c: 80:10000000
[   166.642] 	3d: 20:00100000
[   166.642] 	3e: 00:00000000
[   166.642] 	3f: 00:00000000
[   166.642] CRT1: CR40 - CR43:
[   166.642] 	40: 00:00000000
[   166.642] 	41: 00:00000000
[   166.642] 	42: 00:00000000
[   166.642] 	43: 00:00000000
[   166.642] CRT1: CR44 - CR45 (reserved)
[   166.642] CRT1: CR46 - CR67:
[   166.642] 	46: 00:00000000
[   166.642] 	47: fe:11111110
[   166.642] 	48: c0:11000000
[   166.642] 	49: 08:00001000
[   166.642] 	4a: bf:10111111
[   166.642] 	4b: 88:10001000
[   166.642] 	4c: 00:00000000
[   166.642] 	4d: 10:00010000
[   166.642] 	4e: 10:00010000
[   166.642] 	4f: 20:00100000
[   166.642] 	50: 00:00000000
[   166.642] 	51: 00:00000000
[   166.642] 	52: 30:00110000
[   166.642] 	53: 40:01000000
[   166.642] 	54: 00:00000000
[   166.642] 	55: 00:00000000
[   166.642] 	56: 00:00000000
[   166.642] 	57: 00:00000000
[   166.642] 	58: 00:00000000
[   166.642] 	59: 00:00000000
[   166.642] 	5a: 00:00000000
[   166.642] 	5b: 00:00000000
[   166.642] 	5c: 00:00000000
[   166.642] 	5d: 00:00000000
[   166.642] 	5e: 00:00000000
[   166.642] 	5f: 00:00000000
[   166.642] 	60: 00:00000000
[   166.642] 	61: 00:00000000
[   166.642] 	62: 00:00000000
[   166.642] 	63: 00:00000000
[   166.642] 	64: 00:00000000
[   166.642] 	65: 00:00000000
[   166.642] 	66: 00:00000000
[   166.642] 	67: 00:00000000
[   166.642] CRT1: CR68 - CR6F (DRAM registers reserved for backward compatibility with 760)
[   166.642] CRT1: CR70 - CR77 (undocumented?)
[   166.642] SMA BIOS: CR78 - CR7F:
[   166.642] 	78: 66:01100110
[   166.642] 	79: 80:10000000
[   166.642] 	7a: 90:10010000
[   166.642] 	7b: 02:00000010
[   166.642] 	7c: a2:10100010
[   166.642] 	7d: 05:00000101
[   166.642] 	7e: a3:10100011
[   166.642] 	7f: 03:00000011
[   166.642] CRT1: CR80 - CR9B:
[   166.642] 	80: ffffffff:11111111111111111111111111111111
[   166.642] 	84: ffffffff:11111111111111111111111111111111
[   166.642] 	88: ffffffff:11111111111111111111111111111111
[   166.642] 	8c: ffffffff:11111111111111111111111111111111
[   166.642] 	90: ffffffff:11111111111111111111111111111111
[   166.642] 	94: ffffffff:11111111111111111111111111111111
[   166.642] 	98: ffffffff:11111111111111111111111111111111
[   166.642] 	9c: ffffffff:11111111111111111111111111111111
[   166.642] 	a0: ffffffff:11111111111111111111111111111111
[   166.642] 	a4: ffffffff:11111111111111111111111111111111
[   166.642] 	a8: ffffffff:11111111111111111111111111111111
[   166.642] 	ac: ffffffff:11111111111111111111111111111111
[   166.642] 	b0: ffffffff:11111111111111111111111111111111
[   166.642] CRT1: CRC0 - CRF3:
[   166.642] 	c0: ffffffff:11111111111111111111111111111111
[   166.642] 	c4: ffffffff:11111111111111111111111111111111
[   166.642] 	c8: ffffffff:11111111111111111111111111111111
[   166.642] 	cc: ffffffff:11111111111111111111111111111111
[   166.642] 	d0: ffffffff:11111111111111111111111111111111
[   166.642] 	d4: ffffffff:11111111111111111111111111111111
[   166.642] 	d8: ffffffff:11111111111111111111111111111111
[   166.642] 	dc: ffffffff:11111111111111111111111111111111
[   166.642] 	e0: ffffffff:11111111111111111111111111111111
[   166.642] 	e4: ffffffff:11111111111111111111111111111111
[   166.642] 	e8: ffffffff:11111111111111111111111111111111
[   166.642] 	ec: ffffffff:11111111111111111111111111111111
[   166.643] 	f0: ffffffff:11111111111111111111111111111111
[   166.643] CRT2: SIGNAL REGISTERS, PART1 00 - 45:
[   166.643] 	00: 42:01000010
[   166.643] 	01: 58:01011000
[   166.643] 	02: 52:01010010
[   166.643] 	03: 29:00101001
[   166.643] 	04: 00:00000000
[   166.643] 	05: 00:00000000
[   166.643] 	06: 00:00000000
[   166.643] 	07: 40:01000000
[   166.643] 	08: 7f:01111111
[   166.643] 	09: 51:01010001
[   166.643] 	0a: 10:00010000
[   166.643] 	0b: 20:00100000
[   166.643] 	0c: 55:01010101
[   166.643] 	0d: 30:00110000
[   166.643] 	0e: 2f:00101111
[   166.643] 	0f: 1f:00011111
[   166.643] 	10: 28:00101000
[   166.643] 	11: 3a:00111010
[   166.643] 	12: 1b:00011011
[   166.643] 	13: 00:00000000
[   166.643] 	14: a2:10100010
[   166.643] 	15: 06:00000110
[   166.643] 	16: 00:00000000
[   166.643] 	17: a0:10100000
[   166.643] 	18: 22:00100010
[   166.643] 	19: 25:00100101
[   166.643] 	1a: d8:11011000
[   166.643] 	1b: 2f:00101111
[   166.643] 	1c: 1f:00011111
[   166.643] 	1d: 1b:00011011
[   166.643] 	1e: 20:00100000
[   166.643] 	1f: ff:11111111
[   166.643] 	20: 1c:00011100
[   166.643] 	21: 1f:00011111
[   166.643] 	22: 80:10000000
[   166.643] 	23: 00:00000000
[   166.643] 	24: 00:00000000
[   166.643] 	25: 00:00000000
[   166.643] 	26: 10:00010000
[   166.643] 	27: 04:00000100
[   166.643] 	28: 00:00000000
[   166.643] 	29: 00:00000000
[   166.643] 	2a: 03:00000011
[   166.643] 	2b: 00:00000000
[   166.643] 	2c: 30:00110000
[   166.643] 	2d: 03:00000011
[   166.643] 	2e: 8e:10001110
[   166.643] 	2f: 05:00000101
[   166.643] 	30: 01:00000001
[   166.643] 	31: b5:10110101
[   166.643] 	32: ed:11101101
[   166.643] 	33: 92:10010010
[   166.643] 	34: 80:10000000
[   166.643] 	35: 22:00100010
[   166.643] 	36: 65:01100101
[   166.643] 	37: e3:11100011
[   166.643] 	38: 62:01100010
[   166.643] 	39: 0a:00001010
[   166.643] 	3a: 00:00000000
[   166.643] 	3b: 00:00000000
[   166.643] 	3c: 00:00000000
[   166.643] 	3d: 00:00000000
[   166.643] 	3e: 01:00000001
[   166.643] 	3f: 01:00000001
[   166.643] 	40: 00:00000000
[   166.643] 	41: 00:00000000
[   166.643] 	42: 00:00000000
[   166.643] 	43: 00:00000000
[   166.643] 	44: 00:00000000
[   166.643] 	45: 00:00000000
[   166.643] CRT2: TV SIGNAL REGISTERS, PART2 00 - 4d:
[   166.643] 	00: 3c:00111100
[   166.643] 	01: 34:00110100
[   166.643] 	02: 1b:00011011
[   166.643] 	03: 1f:00011111
[   166.643] 	04: 21:00100001
[   166.643] 	05: 2f:00101111
[   166.643] 	06: 1f:00011111
[   166.643] 	07: 0c:00001100
[   166.643] 	08: 0c:00001100
[   166.643] 	09: 90:10010000
[   166.643] 	0a: 40:01000000
[   166.643] 	0b: 01:00000001
[   166.643] 	0c: 0b:00001011
[   166.643] 	0d: 06:00000110
[   166.643] 	0e: 0d:00001101
[   166.643] 	0f: 04:00000100
[   166.643] 	10: 0a:00001010
[   166.643] 	11: 06:00000110
[   166.643] 	12: 14:00010100
[   166.643] 	13: 0d:00001101
[   166.643] 	14: 04:00000100
[   166.643] 	15: 0a:00001010
[   166.643] 	16: 00:00000000
[   166.643] 	17: 81:10000001
[   166.643] 	18: 1b:00011011
[   166.643] 	19: 2f:00101111
[   166.643] 	1a: 68:01101000
[   166.643] 	1b: 7e:01111110
[   166.643] 	1c: 28:00101000
[   166.643] 	1d: 55:01010101
[   166.644] 	1e: da:11011010
[   166.644] 	1f: 08:00001000
[   166.644] 	20: 07:00000111
[   166.644] 	21: 68:01101000
[   166.644] 	22: 75:01110101
[   166.644] 	23: 08:00001000
[   166.644] 	24: 0b:00001011
[   166.644] 	25: 35:00110101
[   166.644] 	26: e2:11100010
[   166.644] 	27: a2:10100010
[   166.644] 	28: 52:01010010
[   166.644] 	29: 33:00110011
[   166.644] 	2a: aa:10101010
[   166.644] 	2b: 45:01000101
[   166.644] 	2c: ff:11111111
[   166.644] 	2d: 58:01011000
[   166.644] 	2e: 7f:01111111
[   166.644] 	2f: 1e:00011110
[   166.644] 	30: c5:11000101
[   166.644] 	31: 21:00100001
[   166.644] 	32: f0:11110000
[   166.644] 	33: 7b:01111011
[   166.644] 	34: d6:11010110
[   166.644] 	35: 00:00000000
[   166.644] 	36: 00:00000000
[   166.644] 	37: 00:00000000
[   166.644] 	38: 00:00000000
[   166.644] 	39: 92:10010010
[   166.644] 	3a: 8f:10001111
[   166.644] 	3b: 40:01000000
[   166.644] 	3c: 60:01100000
[   166.644] 	3d: 80:10000000
[   166.644] 	3e: 14:00010100
[   166.644] 	3f: ff:11111111
[   166.644] 	40: ff:11111111
[   166.644] 	41: ff:11111111
[   166.644] 	42: 14:00010100
[   166.644] 	43: 4d:01001101
[   166.644] 	44: 00:00000000
[   166.644] 	45: 60:01100000
[   166.644] 	46: 78:01111000
[   166.644] 	47: 1d:00011101
[   166.644] 	48: 1e:00011110
[   166.644] 	49: 11:00010001
[   166.644] 	4a: 82:10000010
[   166.644] 	4b: 69:01101001
[   166.644] 	4c: 61:01100001
[   166.644] 	4d: 03:00000011
[   166.644] CRT2: TV COPY PROTECTION, PART3 00 - 40:
[   166.644] 	00: 00:00000000
[   166.644] 	01: 04:00000100
[   166.644] 	02: c0:11000000
[   166.644] 	03: 39:00111001
[   166.644] 	04: 07:00000111
[   166.644] 	05: 6f:01101111
[   166.644] 	06: 0a:00001010
[   166.644] 	07: 75:01110101
[   166.644] 	08: 01:00000001
[   166.644] 	09: ad:10101101
[   166.644] 	0a: 20:00100000
[   166.644] 	0b: 40:01000000
[   166.644] 	0c: 60:01100000
[   166.644] 	0d: 44:01000100
[   166.644] 	0e: c2:11000010
[   166.644] 	0f: f2:11110010
[   166.644] 	10: 71:01110001
[   166.644] 	11: 64:01100100
[   166.644] 	12: d1:11010001
[   166.644] 	13: f5:11110101
[   166.644] 	14: b7:10110111
[   166.644] 	15: 59:01011001
[   166.644] 	16: 84:10000100
[   166.644] 	17: 80:10000000
[   166.644] 	18: 36:00110110
[   166.644] 	19: 00:00000000
[   166.644] 	1a: 42:01000010
[   166.644] 	1b: 9c:10011100
[   166.644] 	1c: 9f:10011111
[   166.644] 	1d: 2a:00101010
[   166.644] 	1e: 52:01010010
[   166.644] 	1f: 7e:01111110
[   166.644] 	20: 24:00100100
[   166.645] 	21: 6f:01101111
[   166.645] 	22: 16:00010110
[   166.645] 	23: 4c:01001100
[   166.645] 	24: e6:11100110
[   166.645] 	25: 89:10001001
[   166.645] 	26: c4:11000100
[   166.645] 	27: 1b:00011011
[   166.645] 	28: bf:10111111
[   166.645] 	29: a1:10100001
[   166.645] 	2a: 83:10000011
[   166.645] 	2b: 7e:01111110
[   166.645] 	2c: 81:10000001
[   166.645] 	2d: 4b:01001011
[   166.645] 	2e: d0:11010000
[   166.645] 	2f: e4:11100100
[   166.645] 	30: 61:01100001
[   166.645] 	31: 91:10010001
[   166.645] 	32: 1f:00011111
[   166.645] 	33: f9:11111001
[   166.645] 	34: d4:11010100
[   166.645] 	35: 45:01000101
[   166.645] 	36: c4:11000100
[   166.645] 	37: 67:01100111
[   166.645] 	38: b9:10111001
[   166.645] 	39: 41:01000001
[   166.645] 	3a: 2d:00101101
[   166.645] 	3b: 1b:00011011
[   166.645] 	3c: eb:11101011
[   166.645] 	3d: f5:11110101
[   166.645] 	3e: 40:01000000
[   166.645] 	3f: a6:10100110
[   166.645] 	40: 01:00000001
[   166.645] CRT2: SIGNAL REGISTERS, PART4 00 - 3A:
[   166.645] 	00: 07:00000111
[   166.645] 	01: e1:11100001
[   166.645] 	02: 01:00000001
[   166.645] 	03: 4f:01001111
[   166.645] 	04: 00:00000000
[   166.645] 	05: 00:00000000
[   166.645] 	06: 00:00000000
[   166.645] 	07: ef:11101111
[   166.645] 	08: 3f:00111111
[   166.645] 	09: 00:00000000
[   166.645] 	0a: 9c:10011100
[   166.645] 	0b: 62:01100010
[   166.645] 	0c: 83:10000011
[   166.645] 	0d: 8e:10001110
[   166.645] 	0e: 60:01100000
[   166.645] 	0f: 03:00000011
[   166.645] 	10: 80:10000000
[   166.645] 	11: 00:00000000
[   166.645] 	12: 08:00001000
[   166.645] 	13: 01:00000001
[   166.645] 	14: 01:00000001
[   166.645] 	15: 2b:00101011
[   166.645] 	16: 7f:01111111
[   166.645] 	17: 2a:00101010
[   166.645] 	18: 32:00110010
[   166.645] 	19: 40:01000000
[   166.645] 	1a: 00:00000000
[   166.645] 	1b: 00:00000000
[   166.645] 	1c: 28:00101000
[   166.645] 	1d: 3f:00111111
[   166.645] 	1e: 10:00010000
[   166.645] 	1f: f6:11110110
[   166.645] 	20: aa:10101010
[   166.645] 	21: d0:11010000
[   166.645] 	22: be:10111110
[   166.645] 	23: c7:11000111
[   166.645] 	24: 0e:00001110
[   166.645] 	25: 10:00010000
[   166.645] 	26: 06:00000110
[   166.645] 	27: 8c:10001100
[   166.645] 	28: 62:01100010
[   166.645] 	29: d2:11010010
[   166.645] 	2a: 00:00000000
[   166.645] 	2b: a0:10100000
[   166.645] 	2c: 02:00000010
[   166.645] 	2d: 3f:00111111
[   166.645] 	2e: 02:00000010
[   166.645] 	2f: 3f:00111111
[   166.645] 	30: 68:01101000
[   166.645] 	31: 0d:00001101
[   166.646] 	32: 70:01110000
[   166.646] 	33: 38:00111000
[   166.646] 	34: 10:00010000
[   166.646] 	35: c8:11001000
[   166.646] 	36: 10:00010000
[   166.646] 	37: c0:11000000
[   166.646] 	38: 8b:10001011
[   166.646] 	39: ff:11111111
[   166.646] 	3a: fd:11111101
[   166.646] CRT2: PALETTE SIGNAL REGISTERS, PART5 00 - 00 (?):
[   166.646] 	00: 00:00000000
[   166.646] (II) SIS(0): Default Xv adaptor is Video Overlay
[   166.715] (II) SIS(0): Initialized SISCTRL extension version 0.1
[   166.715] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[   166.715] (==) RandR enabled
[   166.726] (II) AIGLX: Screen 0 is not DRI2 capable
[   166.726] (EE) AIGLX: reverting to software rendering
[   167.717] (II) AIGLX: Loaded and initialized swrast
[   167.717] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   168.007] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   168.007] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   168.007] (II) LoadModule: "evdev"
[   168.007] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   168.029] (II) Module evdev: vendor="X.Org Foundation"
[   168.029] 	compiled for 1.16.2, module version = 2.9.1
[   168.029] 	Module class: X.Org XInput Driver
[   168.029] 	ABI class: X.Org XInput driver, version 21.0
[   168.030] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 12 paused 0
[   168.030] (II) Using input driver 'evdev' for 'Power Button'
[   168.030] (**) Power Button: always reports core events
[   168.030] (**) evdev: Power Button: Device: "/dev/input/event5"
[   168.030] (--) evdev: Power Button: Vendor 0 Product 0x1
[   168.030] (--) evdev: Power Button: Found keys
[   168.030] (II) evdev: Power Button: Configuring as keyboard
[   168.030] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[   168.030] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   168.030] (**) Option "xkb_rules" "evdev"
[   168.030] (**) Option "xkb_model" "pc104"
[   168.030] (**) Option "xkb_layout" "us"
[   168.064] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   168.064] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   168.064] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 13 paused 0
[   168.065] (II) Using input driver 'evdev' for 'Video Bus'
[   168.065] (**) Video Bus: always reports core events
[   168.065] (**) evdev: Video Bus: Device: "/dev/input/event2"
[   168.065] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   168.065] (--) evdev: Video Bus: Found keys
[   168.065] (II) evdev: Video Bus: Configuring as keyboard
[   168.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6/event2"
[   168.065] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   168.065] (**) Option "xkb_rules" "evdev"
[   168.065] (**) Option "xkb_model" "pc104"
[   168.065] (**) Option "xkb_layout" "us"
[   168.065] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   168.065] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   168.066] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[   168.066] (II) Using input driver 'evdev' for 'Power Button'
[   168.066] (**) Power Button: always reports core events
[   168.066] (**) evdev: Power Button: Device: "/dev/input/event3"
[   168.066] (--) evdev: Power Button: Vendor 0 Product 0x1
[   168.066] (--) evdev: Power Button: Found keys
[   168.066] (II) evdev: Power Button: Configuring as keyboard
[   168.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event3"
[   168.066] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   168.066] (**) Option "xkb_rules" "evdev"
[   168.066] (**) Option "xkb_model" "pc104"
[   168.067] (**) Option "xkb_layout" "us"
[   168.067] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   168.067] (II) No input driver specified, ignoring this device.
[   168.067] (II) This device may have been added with another device file.
[   168.068] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   168.068] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   168.068] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 15 paused 0
[   168.068] (II) Using input driver 'evdev' for 'Sleep Button'
[   168.068] (**) Sleep Button: always reports core events
[   168.068] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[   168.068] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   168.068] (--) evdev: Sleep Button: Found keys
[   168.068] (II) evdev: Sleep Button: Configuring as keyboard
[   168.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event4"
[   168.069] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   168.069] (**) Option "xkb_rules" "evdev"
[   168.069] (**) Option "xkb_model" "pc104"
[   168.069] (**) Option "xkb_layout" "us"
[   168.069] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[   168.069] (II) No input driver specified, ignoring this device.
[   168.069] (II) This device may have been added with another device file.
[   168.070] (II) config/udev: Adding input device HDA SIS966 Mic (/dev/input/event7)
[   168.070] (II) No input driver specified, ignoring this device.
[   168.070] (II) This device may have been added with another device file.
[   168.070] (II) config/udev: Adding input device HDA SIS966 Headphone (/dev/input/event8)
[   168.070] (II) No input driver specified, ignoring this device.
[   168.070] (II) This device may have been added with another device file.
[   168.070] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   168.070] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   168.071] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 16 paused 0
[   168.071] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   168.071] (**) AT Translated Set 2 keyboard: always reports core events
[   168.071] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   168.071] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   168.071] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   168.071] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   168.071] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   168.071] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   168.071] (**) Option "xkb_rules" "evdev"
[   168.071] (**) Option "xkb_model" "pc104"
[   168.071] (**) Option "xkb_layout" "us"
[   168.072] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[   168.072] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   168.072] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   168.072] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   168.072] (II) LoadModule: "synaptics"
[   168.072] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   168.091] (II) Module synaptics: vendor="X.Org Foundation"
[   168.091] 	compiled for 1.16.0, module version = 1.8.1
[   168.091] 	Module class: X.Org XInput Driver
[   168.091] 	ABI class: X.Org XInput driver, version 21.0
[   168.092] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 17 paused 0
[   168.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   168.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   168.092] (**) Option "Device" "/dev/input/event10"
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 68)
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 93)
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   168.133] (**) Option "TapButton1" "1"
[   168.133] (**) Option "TapButton2" "2"
[   168.133] (**) Option "TapButton3" "3"
[   168.133] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   168.133] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   168.133] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event10"
[   168.133] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[   168.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   168.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   168.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[   168.133] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   168.134] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   168.134] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   168.134] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   168.134] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   168.134] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   168.134] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   168.134] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   168.134] (II) No input driver specified, ignoring this device.
[   168.134] (II) This device may have been added with another device file.
[   169.913] (EE) 
[   169.914] (EE) Backtrace:
[   169.944] (EE) 0: /usr/lib/xorg-server/Xorg (xorg_backtrace+0x52) [0x81db3f2]
[   169.944] (EE) 1: /usr/lib/xorg-server/Xorg (0x8048000+0x197612) [0x81df612]
[   169.944] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb778bb94]
[   169.944] (EE) 3: /usr/lib/xorg/modules/drivers/sisimedia_drv.so (0xb6ae1000+0x44676) [0xb6b25676]
[   169.944] (EE) 4: /usr/lib/xorg/modules/drivers/sisimedia_drv.so (0xb6ae1000+0x37592) [0xb6b18592]
[   169.944] (EE) 5: /usr/lib/xorg/modules/drivers/sisimedia_drv.so (0xb6ae1000+0x27217) [0xb6b08217]
[   169.944] (EE) 6: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x4df7) [0xb6aa6df7]
[   169.944] (EE) 7: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x527f) [0xb6aa727f]
[   169.944] (EE) 8: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x5344) [0xb6aa7344]
[   169.944] (EE) 9: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x5cf5) [0xb6aa7cf5]
[   169.944] (EE) 10: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x3af8) [0xb6aa5af8]
[   169.944] (EE) 11: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x8a41) [0xb6aaaa41]
[   169.944] (EE) 12: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x9401) [0xb6aab401]
[   169.944] (EE) 13: /usr/lib/xorg-server/Xorg (miCopyRegion+0x18d) [0x81bae9d]
[   169.944] (EE) 14: /usr/lib/xorg-server/Xorg (miDoCopy+0x48d) [0x81bb46d]
[   169.944] (EE) 15: /usr/lib/xorg/modules/libexa.so (0xb6aa2000+0x7ab9) [0xb6aa9ab9]
[   169.944] (EE) 16: /usr/lib/xorg-server/Xorg (0x8048000+0x11b6b5) [0x81636b5]
[   169.944] (EE) 17: /usr/lib/xorg-server/Xorg (0x8048000+0x2e794) [0x8076794]
[   169.944] (EE) 18: /usr/lib/xorg-server/Xorg (0x8048000+0x32a06) [0x807aa06]
[   169.944] (EE) 19: /usr/lib/xorg-server/Xorg (0x8048000+0x36bdf) [0x807ebdf]
[   169.944] (EE) 20: /usr/lib/xorg-server/Xorg (0x8048000+0x20a1a) [0x8068a1a]
[   169.944] (EE) 21: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb730764e]
[   169.944] (EE) 22: /usr/lib/xorg-server/Xorg (0x8048000+0x20a48) [0x8068a48]
[   169.944] (EE) 
[   169.944] (EE) Segmentation fault at address 0x0
[   169.945] (EE) 
Fatal server error:
[   169.945] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   169.945] (EE) 
[   169.945] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   169.945] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   169.945] (EE) 
[   169.953] (II) SIS(0): Restoring by setting old mode 0x62
[   172.262] (EE) Server terminated with error (1). Closing log file.

Offline

#12 2015-02-20 09:38:14

thearcherblog
Member
Registered: 2014-10-30
Posts: 165

Re: [SOLVED] I can not run X Server

I'm not expert but...

what you have on .xinitrc?

Looks like there is a segmentation fault and I'm not expert on that but looking at other webs I found some people having issues as well.

If I remember fine, on the old days I used the sismedia driver not the sisi one... but do not know if that has changed.

Offline

#13 2015-02-20 16:14:24

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

thearcherblog wrote:

I'm not expert but...

what you have on .xinitrc?

Looks like there is a segmentation fault and I'm not expert on that but looking at other webs I found some people having issues as well.

If I remember fine, on the old days I used the sismedia driver not the sisi one... but do not know if that has changed.

I don't think that the problem is in the .xinitrc script, because, as I said, I'm able to run the X server if I use the xf86-video-fbdev driver, but the resolution is wrong when I use it. However, my .xinitrc file looks like this: 

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

# exec gnome-session
exec startkde
# exec startxfce4
# ...or the Window Manager of your choice

Offline

#14 2015-02-20 16:25:00

Gusar
Member
Registered: 2009-08-25
Posts: 3,607

Re: [SOLVED] I can not run X Server

That log shows a crash in EXA. It seems the xf86-video-sis671-git driver lacks has the necessary fixes for that. So disable EXA - in your config, add this to the Device section

  Option "ShadowFB" "true"

If that won't do, you'll probably have more luck getting xf86-video-sisimedia to work, however that one was just put into AUR because it doesn't compile with xorg-server-1.17, so you'd need to fix the driver for that.

Another option is to use xf86-video-sis671-git, but apply the patch used with xf86-video-sis that disables the UploadToScreen and DownloadFromScreen hooks (that's where the EXA crash is).

Last edited by Gusar (2015-02-20 16:29:00)

Offline

#15 2015-02-20 19:27:33

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

Gusar wrote:

That log shows a crash in EXA. It seems the xf86-video-sis671-git driver lacks has the necessary fixes for that. So disable EXA - in your config, add this to the Device section

  Option "ShadowFB" "true"

If that won't do, you'll probably have more luck getting xf86-video-sisimedia to work, however that one was just put into AUR because it doesn't compile with xorg-server-1.17, so you'd need to fix the driver for that.

Another option is to use xf86-video-sis671-git, but apply the patch used with xf86-video-sis that disables the UploadToScreen and DownloadFromScreen hooks (that's where the EXA crash is).

Thank you very much! It almost works. Only one small issue- there are some weird shadows around KDE panels, like on the screenshot below:
screenshot

Last edited by amethystAnt (2015-02-20 19:45:25)

Offline

#16 2015-02-20 20:31:10

Gusar
Member
Registered: 2009-08-25
Posts: 3,607

Re: [SOLVED] I can not run X Server

That screenshot looks like issues with rendering transparency. This makes me think you have KDE configured to use compositing. Disable it.

Another thing to try, compile xf86-video-sis671-git with this patch, it should make EXA work. In theory. And no idea if the patch even applies.

Offline

#17 2015-02-20 20:59:59

amethystAnt
Member
Registered: 2015-02-18
Posts: 9

Re: [SOLVED] I can not run X Server

Gusar wrote:

That screenshot looks like issues with rendering transparency. This makes me think you have KDE configured to use compositing. Disable it.

Another thing to try, compile xf86-video-sis671-git with this patch, it should make EXA work. In theory. And no idea if the patch even applies.

It works when I disable compositing. Thank you very much!

Offline

Pages: 1

Board footer

Powered by FluxBB