I cann't find my wireless card after installation.[SOLVED]

wandy · 2015-02-28 10:27:02

I can find anything about wireless. No info in lspci , no info in dmesg. Only Ethernet and enp3s0. Someone please tell me what's the matter with it?

Last edited by wandy (2015-03-05 00:38:42)

nbvcxz · 2015-02-28 11:05:30

1. A big bad monster ate it and nothing we can help
2. Any mode details: paste lspci and lsusb output (don't forget tags). You can try to install inxi to list all hardware in text mode. If you have laptop or brand PC - what is the model?

Last edited by nbvcxz (2015-02-28 11:14:09)

Head_on_a_Stick · 2015-02-28 11:53:23

Does the card show up in the `lspci` output in a different (live) distribution?

Have you checked the card is seated/connected properly?

Did the card work during the installation process?

ewaller · 2015-02-28 17:35:21

Are you building this as a virtual machine using something like VMware or VirtualBox?

jasonwryan · 2015-02-28 18:40:07

Not an Installation issue, moving to NC...

wandy · 2015-03-02 06:33:20

nbvcxz wrote:

1. A big bad monster ate it and nothing we can help
2. Any mode details: paste lspci and lsusb output (don't forget tags). You can try to install inxi to list all hardware in text mode. If you have laptop or brand PC - what is the model?

Firstly, Thank you for you reply.

I found the wireless card should be : Intel wireless 1000 bgn. But I found nothing about it with lspci and only Ethernet appeared.

I also lsusb, but nothing about the wireless card too.

I install it in laptop(Hasee, which is a Chinese brand. I don't think you heard it.)

The first time I install arch into it, whose previous os is win7, and everything was fine. I used the wifi-menu. But afterwards, I just could not find the wireless card.

And I have to install it with wired network.

wandy · 2015-03-02 06:34:23

ewaller wrote:

Are you building this as a virtual machine using something like VMware or VirtualBox?

Nope, actually I installed it in Vbox and everything was fine.

wandy · 2015-03-02 06:38:42

Head_on_a_Stick wrote:

Does the card show up in the `lspci` output in a different (live) distribution?

Have you checked the card is seated/connected properly?
Did the card work during the installation process?

I can not find it in the output of lspci, but Ethernet.

I check the wireless card with the ArchISO before installation with HardWare detection which told me the exact name of wireless card. So I think it is seated well. But it didn't work during the installation process.

I found no Wlan0 interface and only ethernet enp3s0 during the installation.

Head_on_a_Stick · 2015-03-02 20:51:37

Try loading a different distribution in "live" mode and check the `lscpi` output in that distribution.

Your card may have stopped working.

wandy wrote:

I check the wireless card with the ArchISO before installation with HardWare detection which told me the exact name of wireless card.

What is "HardWare detection"?

ewaller · 2015-03-02 22:33:20

wandy wrote:

ewaller wrote:
Are you building this as a virtual machine using something like VMware or VirtualBox?

Nope, actually I installed it in Vbox and everything was fine.

The reason I had asked about whether it was installed in VM is because the wireless jardware won't show up inside a VM. Onlly a wired NIC will show up. What happens is the host either provides bridging or NAT from whatever interface is available (wired or wireless) on the host to the virtual "Wired" NIC in the VM. But, you say everything was fine inside Vbox, and now I am really confused. You definetly would not see the wireless itterface inside the Vbox environment.

nbvcxz · 2015-03-02 22:35:52

OK - first important thing we know it is one of http://www.hasee.com/en/ laptops. Now would be great if you can let us know which model it is ~~(we even can't guess what card is in it)~~. Second - paste on pastebin your lspci -v and lsusb no matter if you can see anything there. You can use any other livecd eg. Ubuntu and compare the results as Head_on_a_Stick suggested.
Edit:
Haven't seen above - could you also pastebin lsmod -if the module is not auto loaded by kernel - it could be the reason.

Last edited by nbvcxz (2015-03-02 22:39:54)

snakeroot · 2015-03-02 23:58:49

Centrino. Now there's a name I haven't heard in a very long time.

Anyway,it seems possible your card is the old Intel® Centrino® Wireless-N 1000.

The driver for this is iwldwm, which is compiled as a module in the Arch stock kernel. The firmware should be provided by the linux-firmware package (which replaces the old iwlwifi-1000-ucode package).

See here for more details:

https://wireless.wiki.kernel.org/en/use … rs/iwlwifi

Please run

lsmod | grep iwl

and tell us what you get.

wandy · 2015-03-03 01:09:32

Head_on_a_Stick wrote:

Try loading a different distribution in "live" mode and check the `lscpi` output in that distribution.
Your card may have stopped working.
wandy wrote:
I check the wireless card with the ArchISO before installation with HardWare detection which told me the exact name of wireless card.
What is "HardWare detection"?

I will try install other distro later.

Hardware detection , I mean I use the hardware information of ArchISO which has hardware information tools.

nullified · 2015-03-03 01:15:01

wandy wrote:

I will try install other distro later.

This may be a language barrier, but no one is suggesting you install another distro. You should be able to boot with a live usb stick, e.g. the Arch usb installer, to do some diagnostics.

Last edited by nullified (2015-03-03 01:20:34)

wandy · 2015-03-03 01:18:36

ewaller wrote:

wandy wrote:
ewaller wrote:
Are you building this as a virtual machine using something like VMware or VirtualBox?

Nope, actually I installed it in Vbox and everything was fine.
The reason I had asked about whether it was installed in VM is because the wireless jardware won't show up inside a VM. Onlly a wired NIC will show up. What happens is the host either provides bridging or NAT from whatever interface is available (wired or wireless) on the host to the virtual "Wired" NIC in the VM. But, you say everything was fine inside Vbox, and now I am really confused. You definetly would not see the wireless itterface inside the Vbox environment.

Sorry, I did not express it clearly. I mean I installed it in vbox and everything was fine. But now I install it in a laptop and I got this problem.

wandy · 2015-03-03 01:21:08

nullified wrote:

wandy wrote:
I will try install other distro later.
This may be a language barrier, but no one is suggesting you install another distro. You should be able to boot into a live usb stick, e.g. the Arch usb installer, to do some diagnostics.

Ah, I got it. My first language is not English. I will try it. Thank you.

lucke · 2015-03-03 01:21:21

Is it enabled via a hardware switch/Fn key?

wandy · 2015-03-03 01:26:34

nbvcxz wrote:

OK - first important thing we know it is one of http://www.hasee.com/en/ laptops. Now would be great if you can let us know which model it is ~~(we even can't guess what card is in it)~~. Second - paste on pastebin your lspci -v and lsusb no matter if you can see anything there. You can use any other livecd eg. Ubuntu and compare the results as Head_on_a_Stick suggested.
Edit:
Haven't seen above - could you also pastebin lsmod -if the module is not auto loaded by kernel - it could be the reason.

Ok, I will paste lspci -tv , dmesg, lsusb and lsmod. Thank you for your time, sir.

lspci -tv::

-+-[0000:ff]-+-00.0  Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers
 |           +-00.1  Intel Corporation Core Processor QuickPath Architecture System Address Decoder
 |           +-02.0  Intel Corporation Core Processor QPI Link 0
 |           +-02.1  Intel Corporation 1st Generation Core Processor QPI Physical 0
 |           +-02.2  Intel Corporation 1st Generation Core Processor Reserved
 |           \-02.3  Intel Corporation 1st Generation Core Processor Reserved
 \-[0000:00]-+-00.0  Intel Corporation Core Processor DRAM Controller
             +-01.0-[01]--+-00.0  NVIDIA Corporation GT215M [GeForce GT 335M]
             |            \-00.1  NVIDIA Corporation High Definition Audio Controller
             +-1a.0  Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             +-1b.0  Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
             +-1c.0-[02]--
             +-1c.1-[03]----00.0  Qualcomm Atheros AR8131 Gigabit Ethernet
             +-1c.4-[09-0b]--
             +-1d.0  Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             +-1e.0-[04]--
             +-1f.0  Intel Corporation Mobile 5 Series Chipset LPC Interface Controller
             +-1f.2  Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller
             +-1f.3  Intel Corporation 5 Series/3400 Series Chipset SMBus Controller
             +-1f.5  Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller
             \-1f.6  Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem

dmesg::

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f63f000-0x000000007f6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f7bf000-0x000000007f7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f7ff000-0x000000007f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Quanta TW9/SW9/Base Board Product Name, BIOS Q3F82 02/01/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017c0000, 0x017c0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37922000-0x37c88fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37497000-0x377fd823]
[    0.000000] Move RAMDISK from [mem 0x37922000-0x37c88823] to [mem 0x37497000-0x377fd823]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FE020 000024 (v02 HASEE )
[    0.000000] ACPI: XSDT 0x7F7FE120 000084 (v01 HASEE  PARADISE 00000001      01000013)
[    0.000000] ACPI: FACP 0x7F7FC000 0000F4 (v04 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x7F7EB000 00DC5D (v02 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x7F75F000 000040
[    0.000000] ACPI: ASF! 0x7F7FD000 0000A5 (v32 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 0x7F7FB000 000038 (v01 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x7F7FA000 00008C (v02 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x7F7F9000 00003C (v01 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x7F7EA000 000176 (v01 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 0x7F7E7000 000028 (v01 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x7F7E6000 000C39 (v01 INTEL  SataPri  00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x7F7E5000 0006C5 (v01 INTEL  SataSec  00001000 INTL 20051117)
[    0.000000] ACPI: ASPT 0x7F7E4000 000034 (v04 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 0x7F7E3000 000224 (v01 HASEE  PARADISE 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x7F7E2000 0009F1 (v01 HASEE  PARADISE 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1152MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017c1000, 0x017c1fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7f7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x7f63efff]
[    0.000000]   node   0: [mem 0x7f7ff000-0x7f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7f7fffff]
[    0.000000] On node 0 totalpages: 521693
[    0.000000] free_area_init_node: node 0, pgdat c1638ec0, node_mem_map f64a7020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2305 pages used for memmap
[    0.000000]   HighMem zone: 294466 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 16 pages/cpu @f641b000 s33600 r0 d31936 u65536
[    0.000000] pcpu-alloc: s33600 r0 d31936 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519917
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=26e42bb2-b9e6-44ad-a865-71b2e7c46b56 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4177912 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f800)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2053512K/2086772K available (4592K kernel code, 500K rwdata, 1348K rodata, 592K init, 836K bss, 33260K reserved, 1177864K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc164e000 - 0xc16e2000   ( 592 kB)
      .data : 0xc147c4a8 - 0xc164c2c0   (1855 kB)
      .text : 0xc1000000 - 0xc147c4a8   (4593 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:2304 nr_irqs:488 0
[    0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2261.294 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4524.02 BogoMIPS (lpj=7537646)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20140926
[    0.013872] ACPI: All ACPI Tables successfully acquired
[    0.036721] Security Framework initialized
[    0.036728] Yama: becoming mindful.
[    0.036741] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.036743] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.036921] Initializing cgroup subsys memory
[    0.036928] Initializing cgroup subsys devices
[    0.036930] Initializing cgroup subsys freezer
[    0.036932] Initializing cgroup subsys net_cls
[    0.036935] Initializing cgroup subsys blkio
[    0.036954] CPU: Physical Processor ID: 0
[    0.036955] CPU: Processor Core ID: 0
[    0.036960] mce: CPU supports 9 MCE banks
[    0.036970] CPU0: Thermal monitoring enabled (TM1)
[    0.036982] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.037125] Freeing SMP alternatives memory: 20K (c16e2000 - c16e7000)
[    0.037738] ftrace: allocating 19787 entries in 39 pages
[    0.046270] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.046772] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079788] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz (fam: 06, model: 25, stepping: 02)
[    0.183886] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.183903] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.183905] ... version:                3
[    0.183906] ... bit width:              48
[    0.183907] ... generic registers:      4
[    0.183908] ... value mask:             0000ffffffffffff
[    0.183909] ... max period:             000000007fffffff
[    0.183910] ... fixed-purpose events:   3
[    0.183911] ... event mask:             000000070000000f
[    0.203961] CPU 1 irqstacks, hard=f595a000 soft=f595c000
[    0.203965] x86: Booting SMP configuration:
[    0.203967] .... node  #0, CPUs:      #1
[    0.215001] Initializing CPU#1
[    0.215035] CPU1: Thermal monitoring handled by SMI
[    0.217234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.223968] CPU 2 irqstacks, hard=f5a3a000 soft=f5a3c000
[    0.223971]  #2
[    0.235102] Initializing CPU#2
[    0.235134] CPU2: Thermal monitoring handled by SMI
[    0.243947] CPU 3 irqstacks, hard=f5a9e000 soft=f5aa0000
[    0.243950]  #3
[    0.254980] Initializing CPU#3
[    0.255011] CPU3: Thermal monitoring handled by SMI
[    0.257110] x86: Booted up 1 node, 4 CPUs
[    0.257115] smpboot: Total of 4 processors activated (18097.11 BogoMIPS)
[    0.259693] devtmpfs: initialized
[    0.259902] PM: Registering ACPI NVS region [mem 0x7f6bf000-0x7f7befff] (1048576 bytes)
[    0.260991] pinctrl core: initialized pinctrl subsystem
[    0.261034] RTC time: 13:52:10, date: 03/02/15
[    0.261150] NET: Registered protocol family 16
[    0.273900] cpuidle: using governor ladder
[    0.287239] cpuidle: using governor menu
[    0.287336] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.287338] ACPI: bus type PCI registered
[    0.287340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.287425] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.287429] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.287430] PCI: Using MMCONFIG for extended config space
[    0.287431] PCI: Using configuration type 1 for base access
[    0.287540] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.287541] mtrr: probably your BIOS does not setup all CPUs.
[    0.287542] mtrr: corrected configuration.
[    0.300986] ACPI: Added _OSI(Module Device)
[    0.300988] ACPI: Added _OSI(Processor Device)
[    0.300989] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.300990] ACPI: Added _OSI(Processor Aggregator Device)
[    0.304478] ACPI: Executed 1 blocks of module-level executable AML code
[    0.330608] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.344367] ACPI: Dynamic OEM Table Load:
[    0.344375] ACPI: SSDT 0xF5816400 0003A0 (v01 HASEE  PARADISE 00003000 INTL 20051117)
[    0.344950] ACPI: Dynamic OEM Table Load:
[    0.344956] ACPI: SSDT 0xF5873000 000650 (v01 HASEE  PARADISE 00003001 INTL 20051117)
[    0.370871] ACPI: Dynamic OEM Table Load:
[    0.370878] ACPI: SSDT 0xF5816C00 000303 (v01 HASEE  PARADISE 00003000 INTL 20051117)
[    0.384026] ACPI: Dynamic OEM Table Load:
[    0.384031] ACPI: SSDT 0xF5B24E00 000119 (v01 HASEE  PARADISE 00003000 INTL 20051117)
[    0.445763] ACPI: Interpreter enabled
[    0.445774] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[    0.445779] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[    0.445798] ACPI: (supports S0 S3 S4 S5)
[    0.445799] ACPI: Using IOAPIC for interrupt routing
[    0.445830] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.496082] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[    0.502058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.502064] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.502097] \_SB_.PCI0:_OSC invalid UUID
[    0.502098] _OSC request data:1 1f 0 
[    0.502102] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.502907] PCI host bridge to bus 0000:00
[    0.502910] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.502912] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.502914] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.502915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.502917] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfeafffff]
[    0.502926] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.502947] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.503036] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.503072] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.503122] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.503204] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.503608] pci 0000:00:1a.0: reg 0x10: [mem 0x99105400-0x991057ff]
[    0.505875] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.505947] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.506000] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.506025] pci 0000:00:1b.0: reg 0x10: [mem 0x99100000-0x99103fff 64bit]
[    0.506136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.506196] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.506241] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.506349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.506410] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.506455] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.506563] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.506623] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.506671] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.506778] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.506838] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.506891] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.507277] pci 0000:00:1d.0: reg 0x10: [mem 0x99105000-0x991053ff]
[    0.509557] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.509628] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.509674] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.509792] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.509836] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.510029] pci 0000:00:1f.2: [8086:3b28] type 00 class 0x01018f
[    0.510051] pci 0000:00:1f.2: reg 0x10: [io  0x5078-0x507f]
[    0.510062] pci 0000:00:1f.2: reg 0x14: [io  0x508c-0x508f]
[    0.510072] pci 0000:00:1f.2: reg 0x18: [io  0x5070-0x5077]
[    0.510083] pci 0000:00:1f.2: reg 0x1c: [io  0x5088-0x508b]
[    0.510094] pci 0000:00:1f.2: reg 0x20: [io  0x5050-0x505f]
[    0.510105] pci 0000:00:1f.2: reg 0x24: [io  0x5040-0x504f]
[    0.510242] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.510264] pci 0000:00:1f.3: reg 0x10: [mem 0x99105800-0x991058ff 64bit]
[    0.510294] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.510406] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[    0.510427] pci 0000:00:1f.5: reg 0x10: [io  0x5068-0x506f]
[    0.510438] pci 0000:00:1f.5: reg 0x14: [io  0x5084-0x5087]
[    0.510449] pci 0000:00:1f.5: reg 0x18: [io  0x5060-0x5067]
[    0.510460] pci 0000:00:1f.5: reg 0x1c: [io  0x5080-0x5083]
[    0.510470] pci 0000:00:1f.5: reg 0x20: [io  0x5030-0x503f]
[    0.510482] pci 0000:00:1f.5: reg 0x24: [io  0x5020-0x502f]
[    0.510627] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.510660] pci 0000:00:1f.6: reg 0x10: [mem 0x99104000-0x99104fff 64bit]
[    0.510888] pci 0000:01:00.0: [10de:0caf] type 00 class 0x030000
[    0.510904] pci 0000:01:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[    0.510918] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.510931] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[    0.510940] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.510949] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.511067] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
[    0.511082] pci 0000:01:00.1: reg 0x10: [mem 0x93000000-0x93003fff]
[    0.511237] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.511239] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.511242] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.511245] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.511323] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.511328] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.511333] pci 0000:00:1c.0:   bridge window [mem 0x98100000-0x990fffff]
[    0.511340] pci 0000:00:1c.0:   bridge window [mem 0x93100000-0x940fffff 64bit pref]
[    0.511482] pci 0000:03:00.0: [1969:1063] type 00 class 0x020000
[    0.511571] pci 0000:03:00.0: reg 0x10: [mem 0x97100000-0x9713ffff 64bit]
[    0.511616] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.512046] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.519350] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.519451] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.519456] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.519461] pci 0000:00:1c.1:   bridge window [mem 0x97100000-0x980fffff]
[    0.519468] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff 64bit pref]
[    0.519547] pci 0000:00:1c.4: PCI bridge to [bus 09-0b]
[    0.519552] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.519556] pci 0000:00:1c.4:   bridge window [mem 0x96100000-0x970fffff]
[    0.519564] pci 0000:00:1c.4:   bridge window [mem 0x95100000-0x960fffff 64bit pref]
[    0.519648] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.519661] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.519663] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.519665] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.519667] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfeafffff] (subtractive decode)
[    0.519707] pci_bus 0000:00: on NUMA node 0
[    0.520358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.520411] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.520462] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.520513] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.520567] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.520619] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.520676] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.520727] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.520850] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.520854] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.520858] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.520926] PCI host bridge to bus 0000:ff
[    0.520928] pci_bus 0000:ff: root bus resource [bus ff]
[    0.520934] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.520985] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.521036] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.521082] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.521130] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.521175] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.521229] pci_bus 0000:ff: on NUMA node 0
[    0.521315] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.521453] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.521533] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.521536] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.521538] vgaarb: loaded
[    0.521539] vgaarb: bridge control possible 0000:01:00.0
[    0.521603] PCI: Using ACPI for IRQ routing
[    0.531378] PCI: pci_cache_line_size set to 64 bytes
[    0.531441] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.531443] e820: reserve RAM buffer [mem 0x7f63f000-0x7fffffff]
[    0.531444] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[    0.531558] NetLabel: Initializing
[    0.531559] NetLabel:  domain hash size = 128
[    0.531560] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.531571] NetLabel:  unlabeled traffic allowed by default
[    0.531609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.531614] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.533645] Switched to clocksource hpet
[    0.539070] pnp: PnP ACPI init
[    0.542614] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io  0x1000-0x1fff]
[    0.542663] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.542665] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.542667] system 00:00: [io  0x0810-0x0813] has been reserved
[    0.542669] system 00:00: [io  0xffff] has been reserved
[    0.542671] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.542673] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.542675] system 00:00: [io  0x0380-0x038e] has been reserved
[    0.542678] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.542713] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.542743] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.542887] pnp 00:03: Plug and Play ACPI device, IDs STL3888 PNP0f13 (active)
[    0.543240] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.543243] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.543245] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.543247] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.543249] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.543251] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.543253] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.543255] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.543257] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.543259] system 00:04: [mem 0x99200000-0x99200fff] has been reserved
[    0.543261] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.543437] pnp: PnP ACPI: found 5 devices
[    0.580469] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.580516] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref]
[    0.580519] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.580522] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.580525] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.580528] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.580531] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.580534] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.580540] pci 0000:00:1c.0:   bridge window [mem 0x98100000-0x990fffff]
[    0.580545] pci 0000:00:1c.0:   bridge window [mem 0x93100000-0x940fffff 64bit pref]
[    0.580553] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.580556] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.580562] pci 0000:00:1c.1:   bridge window [mem 0x97100000-0x980fffff]
[    0.580567] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff 64bit pref]
[    0.580574] pci 0000:00:1c.4: PCI bridge to [bus 09-0b]
[    0.580577] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.580583] pci 0000:00:1c.4:   bridge window [mem 0x96100000-0x970fffff]
[    0.580587] pci 0000:00:1c.4:   bridge window [mem 0x95100000-0x960fffff 64bit pref]
[    0.580594] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.580609] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.580610] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.580612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.580614] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfeafffff]
[    0.580616] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.580618] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff]
[    0.580620] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[    0.580622] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.580623] pci_bus 0000:02: resource 1 [mem 0x98100000-0x990fffff]
[    0.580625] pci_bus 0000:02: resource 2 [mem 0x93100000-0x940fffff 64bit pref]
[    0.580627] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.580629] pci_bus 0000:03: resource 1 [mem 0x97100000-0x980fffff]
[    0.580631] pci_bus 0000:03: resource 2 [mem 0x94100000-0x950fffff 64bit pref]
[    0.580633] pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
[    0.580634] pci_bus 0000:09: resource 1 [mem 0x96100000-0x970fffff]
[    0.580636] pci_bus 0000:09: resource 2 [mem 0x95100000-0x960fffff 64bit pref]
[    0.580638] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.580640] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.580642] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.580644] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfeafffff]
[    0.580669] NET: Registered protocol family 2
[    0.580859] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.580883] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.580921] TCP: Hash tables configured (established 8192 bind 8192)
[    0.580938] TCP: reno registered
[    0.580940] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.580948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.580998] NET: Registered protocol family 1
[    0.607169] pci 0000:01:00.0: Video device with shadowed ROM
[    0.607191] PCI: CLS 64 bytes, default 64
[    0.607238] Unpacking initramfs...
[    0.679003] Freeing initrd memory: 3484K (f7497000 - f77fe000)
[    0.679047] Simple Boot Flag at 0x44 set to 0x1
[    0.679308] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[    0.679315] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[    0.679325] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[    0.679332] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[    0.679398] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.679411] apm: BIOS not found.
[    0.679436] Scanning for low memory corruption every 60 seconds
[    0.679794] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.679828] Initialise system trusted keyring
[    0.680133] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.681588] zpool: loaded
[    0.681591] zbud: loaded
[    0.681715] VFS: Disk quotas dquot_6.5.2
[    0.681753] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.681871] msgmni has been set to 1717
[    0.681926] Key type big_key registered
[    0.682152] bounce: pool size: 64 pages
[    0.682186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.682241] io scheduler noop registered
[    0.682243] io scheduler deadline registered
[    0.682275] io scheduler cfq registered (default)
[    0.682466] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.682867] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.682884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.682916] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.682917] vesafb: scrolling: redraw
[    0.682919] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.682933] vesafb: framebuffer at 0x91000000, mapped to 0xf8080000, using 1216k, total 1216k
[    0.725426] Console: switching to colour frame buffer device 80x30
[    0.767855] fb0: VESA VGA frame buffer device
[    0.767873] intel_idle: MWAIT substates: 0x1120
[    0.767874] intel_idle: v0.4 model 0x25
[    0.767875] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.768067] GHES: HEST is not enabled!
[    0.768081] isapnp: Scanning for PnP cards...
[    1.081719] isapnp: No Plug & Play device found
[    1.081775] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.082349] rtc_cmos 00:01: RTC can wake from S4
[    1.082497] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.082530] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.082563] ledtrig-cpu: registered to indicate activity on CPUs
[    1.082677] TCP: cubic registered
[    1.082796] NET: Registered protocol family 10
[    1.083015] NET: Registered protocol family 17
[    1.083202] Using IPI No-Shortcut mode
[    1.083380] Loading compiled-in X.509 certificates
[    1.083395] registered taskstats version 1
[    1.083855]   Magic number: 7:846:886
[    1.083952] rtc_cmos 00:01: setting system clock to 2015-03-02 13:52:11 UTC (1425304331)
[    1.084038] PM: Hibernation image not present or could not be loaded.
[    1.084215] Freeing unused kernel memory: 592K (c164e000 - c16e2000)
[    1.084239] Write protecting the kernel text: 4596k
[    1.084291] Write protecting the kernel read-only data: 1352k
[    1.093681] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    1.108876] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:AVC0] at 0x60,0x64 irq 1,12
[    1.122803] ACPI: bus type USB registered
[    1.122842] usbcore: registered new interface driver usbfs
[    1.122857] usbcore: registered new interface driver hub
[    1.122899] usbcore: registered new device driver usb
[    1.122989] SCSI subsystem initialized
[    1.123298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.123622] ehci-pci: EHCI PCI platform driver
[    1.123815] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.123825] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.123865] ehci-pci 0000:00:1a.0: debug port 2
[    1.127814] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.127839] ehci-pci 0000:00:1a.0: irq 16, io mem 0x99105400
[    1.132464] libata version 3.00 loaded.
[    1.137359] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.140216] hub 1-0:1.0: USB hub found
[    1.140230] hub 1-0:1.0: 3 ports detected
[    1.140481] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.140551] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.140621] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.140634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.140651] ehci-pci 0000:00:1d.0: debug port 2
[    1.144626] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.144645] ehci-pci 0000:00:1d.0: irq 21, io mem 0x99105000
[    1.153875] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.154086] hub 2-0:1.0: USB hub found
[    1.154097] hub 2-0:1.0: 3 ports detected
[    1.154264] ata_piix 0000:00:1f.2: version 2.13
[    1.154384] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.170879] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.307964] scsi host0: ata_piix
[    1.308535] scsi host1: ata_piix
[    1.308656] ata1: SATA max UDMA/133 cmd 0x5078 ctl 0x508c bmdma 0x5050 irq 19
[    1.308670] ata2: SATA max UDMA/133 cmd 0x5070 ctl 0x5088 bmdma 0x5058 irq 19
[    1.308777] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.444065] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.460742] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.461129] scsi host2: ata_piix
[    1.461309] scsi host3: ata_piix
[    1.461362] ata3: SATA max UDMA/133 cmd 0x5068 ctl 0x5084 bmdma 0x5030 irq 19
[    1.461368] ata4: SATA max UDMA/133 cmd 0x5060 ctl 0x5080 bmdma 0x5038 irq 19
[    1.568208] hub 1-1:1.0: USB hub found
[    1.568319] hub 1-1:1.0: 6 ports detected
[    1.585149] hub 2-1:1.0: USB hub found
[    1.585378] hub 2-1:1.0: 8 ports detected
[    1.680813] tsc: Refined TSC clocksource calibration: 2261.254 MHz
[    1.792368] ata3: SATA link down (SStatus 0 SControl 300)
[    1.804172] ata4: SATA link down (SStatus 0 SControl 300)
[    1.857772] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    2.651141] ata2.01: failed to resume link (SControl 0)
[    2.651243] ata1.01: failed to resume link (SControl 0)
[    2.681341] Switched to clocksource tsc
[    2.804589] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.804612] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.804793] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.804815] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.804831] ata2.01: link offline, clearing class 3 to NONE
[    2.811711] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[    2.811716] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.825069] ata1.00: configured for UDMA/133
[    2.825390] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 C64G PQ: 0 ANSI: 5
[    2.828109] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, CH01, max UDMA/100
[    2.828115] ata2.00: applying bridge limits
[    2.858127] ata2.00: configured for UDMA/100
[    2.863338] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633C  CH01 PQ: 0 ANSI: 5
[    2.879415] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.879523] sd 0:0:0:0: [sda] Write Protect is off
[    2.879527] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.879557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.895646] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.895648] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.895827] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.916032]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.917458] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.596368] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.176864] random: nonblocking pool is initialized
[    5.239899] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.694120] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    6.839950] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.839957] ACPI: Power Button [PWRB]
[    6.840025] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    6.843309] ACPI: Video Device [VGA1] (multi-head: yes  rom: yes  post: no)
[    6.843520] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:02/input/input4
[    6.843969] ACPI: Lid Switch [LID0]
[    6.844024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    6.844027] ACPI: Sleep Button [SLPB]
[    6.844101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    6.844104] ACPI: Power Button [PWRF]
[    6.917694] ACPI: Battery Slot [BAT0] (battery present)
[    6.918328] wmi: Mapper loaded
[    6.943382] ACPI: AC Adapter [ACAD] (off-line)
[    6.988957] thermal LNXTHERM:00: registered as thermal_zone0
[    6.988960] ACPI: Thermal Zone [TZ01] (25 C)
[    7.092436] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    7.092575] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    7.092654] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    7.114660] Linux agpgart interface v0.103
[    7.156707] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.184922] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140926/utaddress-258)
[    7.184929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.184932] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[    7.184936] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.184937] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[    7.184939] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.184941] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[    7.184943] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.184944] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.209315] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    7.270943] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    7.337252] systemd-journald[144]: Received request to flush runtime journal from PID 1
[    7.458033] ACPI Warning: SystemIO range 0x00005000-0x0000501f conflicts with OpRegion 0x00005000-0x0000500f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[    7.458040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.767240] iTCO_vendor_support: vendor-support=0
[    7.789950] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[    7.789951] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[    7.790085] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.790094] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.841609] psmouse serio1: hgpk: ID: 10 00 64
[    7.926967] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.927016] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    7.927212] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.944667] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.944671] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.944673] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.944675] sound hdaudioC0D0:    mono: mono_out=0x0
[    7.944676] sound hdaudioC0D0:    inputs:
[    7.944678] sound hdaudioC0D0:      Mic=0x18
[    7.944680] sound hdaudioC0D0:      Internal Mic=0x12
[    7.955495] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[    7.955793] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.955865] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.170848] [drm] Initialized drm 1.1.0 20060810
[    8.297670] media: Linux media interface: v0.10
[    8.356331] psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.1.1, sn: 0, sw: 1.1.0-K
[    8.374384] Adding 4194300k swap on /dev/sda2.  Priority:-1 extents:1 across:4194300k FS
[    8.396091] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[    8.554360] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    8.554455] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    8.554610] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    8.554697] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    8.558989] Linux video capture interface: v2.00
[    8.677710] MXM: GUID detected in BIOS
[    8.677778] ACPI Warning: \_SB_.PCI0.P0P3.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[    8.677795] ACPI: \_SB_.PCI0.P0P3.VGA_: failed to evaluate _DSM
[    8.677822] checking generic (91000000 130000) vs hw (80000000 10000000)
[    8.677823] checking generic (91000000 130000) vs hw (90000000 2000000)
[    8.677825] fb: switching to nouveaufb from VESA VGA
[    8.677846] Console: switching to colour dummy device 80x25
[    8.678490] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a3780a2
[    8.678497] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT215 (NVA3)
[    8.678500] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    8.678535] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    8.809164] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    8.809168] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    8.809273] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    8.809276] nouveau  [   VBIOS][0000:01:00.0] version 70.15.15.00.05
[    8.829743] nouveau 0000:01:00.0: irq 26 for MSI/MSI-X
[    8.829759] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    8.829809] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    8.829811] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    8.829813] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 2048 tags
[    8.833115] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[    8.862217] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    8.862234] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    8.862239] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    8.882320] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[    8.882324] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[    8.882327] nouveau  [     CLK][0000:01:00.0] 0f: core 450 MHz shader 1080 MHz memory 790 MHz
[    8.882371] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[    8.883682] [TTM] Zone  kernel: Available graphics memory: 439872 kiB
[    8.883685] [TTM] Zone highmem: Available graphics memory: 1028804 kiB
[    8.883687] [TTM] Initializing pool allocator
[    8.883694] [TTM] Initializing DMA pool allocator
[    8.883707] nouveau  [     DRM] VRAM: 1024 MiB
[    8.883709] nouveau  [     DRM] GART: 1048576 MiB
[    8.883713] nouveau  [     DRM] TMDS table version 2.0
[    8.883716] nouveau  [     DRM] DCB version 4.0
[    8.883719] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[    8.883722] nouveau  [     DRM] DCB outp 01: 02014300 00000000
[    8.883724] nouveau  [     DRM] DCB outp 02: 02021362 00020010
[    8.883726] nouveau  [     DRM] DCB conn 00: 00000340
[    8.883729] nouveau  [     DRM] DCB conn 01: 00001061
[    8.883731] nouveau  [     DRM] DCB conn 02: 00000147
[    8.883733] nouveau  [     DRM] DCB conn 03: 00202346
[    8.883734] nouveau  [     DRM] DCB conn 04: 00000400
[    8.883737] nouveau  [     DRM] DCB conn 05: 00000210
[    8.883739] nouveau  [     DRM] DCB conn 06: 00000211
[    8.883741] nouveau  [     DRM] DCB conn 07: 00000213
[    8.929381] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.929383] [drm] Driver supports precise vblank timestamp query.
[    8.947062] uvcvideo: Found UVC 1.00 device USB Webcam (0408:1322)
[    8.950807] input: USB Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input16
[    8.950898] usbcore: registered new interface driver uvcvideo
[    8.950900] USB Video Class driver (1.1.1)
[    8.972258] nouveau  [     DRM] MM: using COPY for buffer copies
[    9.126974] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input8
[    9.151311] mousedev: PS/2 mouse device common for all mice
[    9.248258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    9.425029] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[   10.102340] nouveau  [     DRM] allocated 1366x768 fb: 0x70000, bo f2291c00
[   10.102461] fbcon: nouveaufb (fb0) is primary device
[   10.419175] Console: switching to colour frame buffer device 170x48
[   10.419802] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   10.419805] nouveau 0000:01:00.0: registered panic notifier
[   10.435412] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[  122.812138] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[  123.268062] hidraw: raw HID events driver (C) Jiri Kosina
[  123.292135] usbcore: registered new interface driver usbhid
[  123.292141] usbhid: USB HID core driver
[  123.303554] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046A:0011.0001/input/input17
[  123.303748] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1.2/input0
[  295.123696] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  303.113082] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  309.892047] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[ 1059.886749] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[ 2016.392967] PM: Syncing filesystems ... done.
[ 2016.496034] PM: Preparing system for mem sleep
[ 2016.497169] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2016.498353] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2016.499494] PM: Entering mem sleep
[ 2016.499586] Suspending console(s) (use no_console_suspend to debug)
[ 2016.500025] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2016.546677] sd 0:0:0:0: [sda] Stopping disk
[ 2017.084698] i8042 aux 00:03: System wakeup disabled by ACPI
[ 2017.084731] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2017.084882] nouveau  [     DRM] suspending console...
[ 2017.084892] nouveau  [     DRM] suspending display...
[ 2017.084975] nouveau  [     DRM] evicting buffers...
[ 2017.092466] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 2017.092508] nouveau  [     DRM] suspending client object trees...
[ 2017.092772] nouveau  [     DRM] suspending kernel object tree...
[ 2019.616304] PM: suspend of devices complete after 3115.510 msecs
[ 2019.616669] PM: late suspend of devices complete after 0.360 msecs
[ 2019.617259] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2019.617388] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2019.629424] PM: noirq suspend of devices complete after 12.747 msecs
[ 2019.629725] ACPI: Preparing to enter system sleep state S3
[ 2019.637852] PM: Saving platform NVS memory
[ 2019.638602] Disabling non-boot CPUs ...
[ 2019.639933] kvm: disabling virtualization on CPU1
[ 2019.640143] smpboot: CPU 1 is now offline
[ 2019.641699] kvm: disabling virtualization on CPU2
[ 2019.641707] smpboot: CPU 2 is now offline
[ 2019.643268] kvm: disabling virtualization on CPU3
[ 2019.643294] smpboot: CPU 3 is now offline
[ 2019.644436] ACPI: Low-level resume complete
[ 2019.644493] PM: Restoring platform NVS memory
[ 2019.645132] Enabling non-boot CPUs ...
[ 2019.645184] x86: Booting SMP configuration:
[ 2019.645185] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2019.656237] Initializing CPU#1
[ 2019.656305] kvm: enabling virtualization on CPU1
[ 2019.658717] CPU1 is up
[ 2019.658743] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2019.669858] Initializing CPU#2
[ 2019.669921] kvm: enabling virtualization on CPU2
[ 2019.672361] CPU2 is up
[ 2019.672388] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2019.683403] Initializing CPU#3
[ 2019.683469] kvm: enabling virtualization on CPU3
[ 2019.685950] CPU3 is up
[ 2019.688449] ACPI: Waking up from system sleep state S3
[ 2019.727894] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2019.728125] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2019.728198] PM: noirq resume of devices complete after 13.557 msecs
[ 2019.728409] PM: early resume of devices complete after 0.180 msecs
[ 2019.728606] nouveau  [     DRM] re-enabling device...
[ 2019.728623] nouveau  [     DRM] resuming kernel object tree...
[ 2019.728642] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 2019.730959] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 2019.731342] sd 0:0:0:0: [sda] Starting disk
[ 2019.740810] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2019.740838] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2019.916989] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2019.916997] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 2019.937082] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 2019.941870] nouveau  [     DRM] resuming client object trees...
[ 2019.941879] nouveau  [     DRM] resuming display...
[ 2019.944248] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 2020.062765] ata4: SATA link down (SStatus 0 SControl 300)
[ 2020.074595] ata3: SATA link down (SStatus 4 SControl 300)
[ 2020.241981] nouveau  [     DRM] resuming console...
[ 2020.242715] PM: resume of devices complete after 514.127 msecs
[ 2020.670701] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input18
[ 2020.670971] PM: Finishing wakeup.
[ 2020.670973] Restarting tasks ... done.
[ 2021.074690] ata2.01: failed to resume link (SControl 0)
[ 2021.074788] ata1.01: failed to resume link (SControl 0)
[ 2021.228884] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2021.228911] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2021.228930] ata2.01: link offline, clearing class 3 to NONE
[ 2021.328359] ata2.00: configured for UDMA/100
[ 2022.668615] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2022.668638] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2022.699141] ata1.00: configured for UDMA/133
[ 2046.670333] PM: Syncing filesystems ... done.
[ 2047.302797] PM: Preparing system for mem sleep
[ 2047.303599] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2047.304792] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2047.306002] PM: Entering mem sleep
[ 2047.306093] Suspending console(s) (use no_console_suspend to debug)
[ 2047.306492] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2047.342704] sd 0:0:0:0: [sda] Stopping disk
[ 2047.901329] i8042 aux 00:03: System wakeup disabled by ACPI
[ 2047.901350] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2047.901419] nouveau  [     DRM] suspending console...
[ 2047.901430] nouveau  [     DRM] suspending display...
[ 2047.901528] nouveau  [     DRM] evicting buffers...
[ 2047.902149] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 2047.902186] nouveau  [     DRM] suspending client object trees...
[ 2047.902461] nouveau  [     DRM] suspending kernel object tree...
[ 2050.428278] PM: suspend of devices complete after 3120.975 msecs
[ 2050.428614] PM: late suspend of devices complete after 0.332 msecs
[ 2050.429107] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2050.429221] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2050.441335] PM: noirq suspend of devices complete after 12.714 msecs
[ 2050.441643] ACPI: Preparing to enter system sleep state S3
[ 2050.449766] PM: Saving platform NVS memory
[ 2050.450495] Disabling non-boot CPUs ...
[ 2050.451857] kvm: disabling virtualization on CPU1
[ 2050.452086] smpboot: CPU 1 is now offline
[ 2050.453607] kvm: disabling virtualization on CPU2
[ 2050.453615] smpboot: CPU 2 is now offline
[ 2050.455137] kvm: disabling virtualization on CPU3
[ 2050.455160] smpboot: CPU 3 is now offline
[ 2050.456180] ACPI: Low-level resume complete
[ 2050.456239] PM: Restoring platform NVS memory
[ 2050.456881] Enabling non-boot CPUs ...
[ 2050.456947] x86: Booting SMP configuration:
[ 2050.456948] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2050.468084] Initializing CPU#1
[ 2050.468150] kvm: enabling virtualization on CPU1
[ 2050.470573] CPU1 is up
[ 2050.470599] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2050.481714] Initializing CPU#2
[ 2050.481777] kvm: enabling virtualization on CPU2
[ 2050.484222] CPU2 is up
[ 2050.484255] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2050.495270] Initializing CPU#3
[ 2050.495333] kvm: enabling virtualization on CPU3
[ 2050.497807] CPU3 is up
[ 2050.500295] ACPI: Waking up from system sleep state S3
[ 2051.036809] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2051.036853] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2051.036920] PM: noirq resume of devices complete after 11.816 msecs
[ 2051.037092] PM: early resume of devices complete after 0.144 msecs
[ 2051.037229] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 2051.037348] nouveau  [     DRM] re-enabling device...
[ 2051.037365] nouveau  [     DRM] resuming kernel object tree...
[ 2051.037384] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 2051.039939] sd 0:0:0:0: [sda] Starting disk
[ 2051.049517] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2051.049549] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2051.225681] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2051.225692] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 2051.245779] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 2051.250528] nouveau  [     DRM] resuming client object trees...
[ 2051.250537] nouveau  [     DRM] resuming display...
[ 2051.252941] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 2051.371735] ata4: SATA link down (SStatus 0 SControl 300)
[ 2051.383921] ata3: SATA link down (SStatus 4 SControl 300)
[ 2051.551815] nouveau  [     DRM] resuming console...
[ 2051.552526] PM: resume of devices complete after 515.255 msecs
[ 2051.552753] PM: Finishing wakeup.
[ 2051.552755] Restarting tasks ... done.
[ 2052.386676] ata2.01: failed to resume link (SControl 0)
[ 2052.390003] ata1.01: failed to resume link (SControl 0)
[ 2052.540147] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2052.540174] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2052.540196] ata2.01: link offline, clearing class 3 to NONE
[ 2052.640367] ata2.00: configured for UDMA/100
[ 2053.450447] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2053.450469] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2053.474290] ata1.00: configured for UDMA/133
[ 2370.945503] PM: Syncing filesystems ... done.
[ 2371.237152] PM: Preparing system for mem sleep
[ 2371.237959] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2371.239100] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2371.240238] PM: Entering mem sleep
[ 2371.240343] Suspending console(s) (use no_console_suspend to debug)
[ 2371.240853] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2371.241014] sd 0:0:0:0: [sda] Stopping disk
[ 2371.837330] i8042 aux 00:03: System wakeup disabled by ACPI
[ 2371.837350] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2371.837443] nouveau  [     DRM] suspending console...
[ 2371.837464] nouveau  [     DRM] suspending display...
[ 2371.837543] nouveau  [     DRM] evicting buffers...
[ 2371.838190] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 2371.838227] nouveau  [     DRM] suspending client object trees...
[ 2371.838559] nouveau  [     DRM] suspending kernel object tree...
[ 2374.366396] PM: suspend of devices complete after 3124.824 msecs
[ 2374.366787] PM: late suspend of devices complete after 0.385 msecs
[ 2374.367344] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2374.367407] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2374.379386] PM: noirq suspend of devices complete after 12.591 msecs
[ 2374.379689] ACPI: Preparing to enter system sleep state S3
[ 2374.387811] PM: Saving platform NVS memory
[ 2374.388555] Disabling non-boot CPUs ...
[ 2374.389916] kvm: disabling virtualization on CPU1
[ 2374.390149] smpboot: CPU 1 is now offline
[ 2374.391707] kvm: disabling virtualization on CPU2
[ 2374.391711] smpboot: CPU 2 is now offline
[ 2374.393332] kvm: disabling virtualization on CPU3
[ 2374.393346] smpboot: CPU 3 is now offline
[ 2374.394368] ACPI: Low-level resume complete
[ 2374.394426] PM: Restoring platform NVS memory
[ 2374.395080] Enabling non-boot CPUs ...
[ 2374.395146] x86: Booting SMP configuration:
[ 2374.395147] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2374.406183] Initializing CPU#1
[ 2374.406247] kvm: enabling virtualization on CPU1
[ 2374.408667] CPU1 is up
[ 2374.408692] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2374.419708] Initializing CPU#2
[ 2374.419770] kvm: enabling virtualization on CPU2
[ 2374.422216] CPU2 is up
[ 2374.422242] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2374.433357] Initializing CPU#3
[ 2374.433422] kvm: enabling virtualization on CPU3
[ 2374.435893] CPU3 is up
[ 2374.438400] ACPI: Waking up from system sleep state S3
[ 2374.974337] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2374.974670] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2374.974885] PM: noirq resume of devices complete after 13.389 msecs
[ 2374.975086] PM: early resume of devices complete after 0.173 msecs
[ 2374.975202] nouveau  [     DRM] re-enabling device...
[ 2374.975240] nouveau  [     DRM] resuming kernel object tree...
[ 2374.975261] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 2374.975395] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 2374.977888] sd 0:0:0:0: [sda] Starting disk
[ 2374.987545] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2374.987572] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2375.164910] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2375.164918] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 2375.185009] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 2375.188588] nouveau  [     DRM] resuming client object trees...
[ 2375.188605] nouveau  [     DRM] resuming display...
[ 2375.191054] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 2375.302836] ata3: SATA link down (SStatus 4 SControl 300)
[ 2375.315646] ata4: SATA link down (SStatus 0 SControl 300)
[ 2375.488820] nouveau  [     DRM] resuming console...
[ 2375.489528] PM: resume of devices complete after 514.263 msecs
[ 2375.489773] PM: Finishing wakeup.
[ 2375.489775] Restarting tasks ... done.
[ 2376.314747] ata1.01: failed to resume link (SControl 0)
[ 2376.338093] ata2.01: failed to resume link (SControl 0)
[ 2376.491601] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2376.491628] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2376.491647] ata2.01: link offline, clearing class 3 to NONE
[ 2376.591706] ata2.00: configured for UDMA/100
[ 2377.375174] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2377.375198] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2377.405663] ata1.00: configured for UDMA/133
[ 2595.898439] atl1c 0000:03:00.0: irq 27 for MSI/MSI-X
[ 2595.898556] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<1000 Mbps Full Duplex>
[ 2794.335093] PM: Syncing filesystems ... done.
[ 2794.634638] PM: Preparing system for mem sleep
[ 2794.635506] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2794.636731] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2794.637887] PM: Entering mem sleep
[ 2794.637977] Suspending console(s) (use no_console_suspend to debug)
[ 2794.638484] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2794.638665] sd 0:0:0:0: [sda] Stopping disk
[ 2795.230399] i8042 aux 00:03: System wakeup disabled by ACPI
[ 2795.230436] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2795.230577] nouveau  [     DRM] suspending console...
[ 2795.230594] nouveau  [     DRM] suspending display...
[ 2795.230822] nouveau  [     DRM] evicting buffers...
[ 2795.231342] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 2795.231377] nouveau  [     DRM] suspending client object trees...
[ 2795.231709] nouveau  [     DRM] suspending kernel object tree...
[ 2797.748221] PM: suspend of devices complete after 3109.038 msecs
[ 2797.748617] PM: late suspend of devices complete after 0.391 msecs
[ 2797.749259] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2797.749331] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2797.761216] PM: noirq suspend of devices complete after 12.591 msecs
[ 2797.761523] ACPI: Preparing to enter system sleep state S3
[ 2797.769645] PM: Saving platform NVS memory
[ 2797.770393] Disabling non-boot CPUs ...
[ 2797.771746] kvm: disabling virtualization on CPU1
[ 2797.771983] smpboot: CPU 1 is now offline
[ 2797.773782] kvm: disabling virtualization on CPU2
[ 2797.773792] smpboot: CPU 2 is now offline
[ 2797.775672] kvm: disabling virtualization on CPU3
[ 2797.775680] smpboot: CPU 3 is now offline
[ 2797.776888] ACPI: Low-level resume complete
[ 2797.776947] PM: Restoring platform NVS memory
[ 2797.777594] Enabling non-boot CPUs ...
[ 2797.777646] x86: Booting SMP configuration:
[ 2797.777647] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2797.788788] Initializing CPU#1
[ 2797.788852] kvm: enabling virtualization on CPU1
[ 2797.791274] CPU1 is up
[ 2797.791301] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2797.802415] Initializing CPU#2
[ 2797.802477] kvm: enabling virtualization on CPU2
[ 2797.804918] CPU2 is up
[ 2797.804946] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2797.816061] Initializing CPU#3
[ 2797.816124] kvm: enabling virtualization on CPU3
[ 2797.818577] CPU3 is up
[ 2797.821080] ACPI: Waking up from system sleep state S3
[ 2798.356227] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2798.356525] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2798.356803] PM: noirq resume of devices complete after 13.182 msecs
[ 2798.357118] PM: early resume of devices complete after 0.247 msecs
[ 2798.357326] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 2798.357593] nouveau  [     DRM] re-enabling device...
[ 2798.357609] nouveau  [     DRM] resuming kernel object tree...
[ 2798.357630] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 2798.367178] sd 0:0:0:0: [sda] Starting disk
[ 2798.368398] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2798.368420] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2798.379698] atl1c 0000:03:00.0: irq 27 for MSI/MSI-X
[ 2798.546481] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2798.546488] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 2798.566574] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 2798.570429] nouveau  [     DRM] resuming client object trees...
[ 2798.570438] nouveau  [     DRM] resuming display...
[ 2798.580227] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 2798.691298] ata4: SATA link down (SStatus 0 SControl 300)
[ 2798.703106] ata3: SATA link down (SStatus 4 SControl 300)
[ 2798.872332] nouveau  [     DRM] resuming console...
[ 2798.872964] PM: resume of devices complete after 515.667 msecs
[ 2798.873166] PM: Finishing wakeup.
[ 2798.873168] Restarting tasks ... done.
[ 2799.703260] ata1.01: failed to resume link (SControl 0)
[ 2799.703359] ata2.01: failed to resume link (SControl 0)
[ 2799.856763] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2799.856789] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2799.856809] ata2.01: link offline, clearing class 3 to NONE
[ 2799.940294] ata2.00: configured for UDMA/100
[ 2800.763707] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2800.763729] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2800.787583] ata1.00: configured for UDMA/133
[ 2801.399611] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<1000 Mbps Full Duplex>
[ 2857.191628] PM: Syncing filesystems ... done.
[ 2857.657259] PM: Preparing system for mem sleep
[ 2857.658113] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2857.659373] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2857.660536] PM: Entering mem sleep
[ 2857.660628] Suspending console(s) (use no_console_suspend to debug)
[ 2857.661015] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2857.675002] sd 0:0:0:0: [sda] Stopping disk
[ 2858.253544] i8042 aux 00:03: System wakeup disabled by ACPI
[ 2858.253565] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2858.253710] nouveau  [     DRM] suspending console...
[ 2858.253719] nouveau  [     DRM] suspending display...
[ 2858.253799] nouveau  [     DRM] evicting buffers...
[ 2858.254502] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 2858.254536] nouveau  [     DRM] suspending client object trees...
[ 2858.254879] nouveau  [     DRM] suspending kernel object tree...
[ 2860.784160] PM: suspend of devices complete after 3122.303 msecs
[ 2860.784612] PM: late suspend of devices complete after 0.445 msecs
[ 2860.785244] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2860.785325] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2860.797391] PM: noirq suspend of devices complete after 12.772 msecs
[ 2860.797688] ACPI: Preparing to enter system sleep state S3
[ 2860.805809] PM: Saving platform NVS memory
[ 2860.806565] Disabling non-boot CPUs ...
[ 2860.807920] kvm: disabling virtualization on CPU1
[ 2860.808151] smpboot: CPU 1 is now offline
[ 2860.809695] kvm: disabling virtualization on CPU2
[ 2860.809704] smpboot: CPU 2 is now offline
[ 2860.811242] kvm: disabling virtualization on CPU3
[ 2860.811257] smpboot: CPU 3 is now offline
[ 2860.812251] ACPI: Low-level resume complete
[ 2860.812310] PM: Restoring platform NVS memory
[ 2860.812963] Enabling non-boot CPUs ...
[ 2860.813016] x86: Booting SMP configuration:
[ 2860.813016] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2860.824167] Initializing CPU#1
[ 2860.824232] kvm: enabling virtualization on CPU1
[ 2860.826658] CPU1 is up
[ 2860.826683] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2860.837799] Initializing CPU#2
[ 2860.837861] kvm: enabling virtualization on CPU2
[ 2860.840307] CPU2 is up
[ 2860.840334] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2860.851449] Initializing CPU#3
[ 2860.851513] kvm: enabling virtualization on CPU3
[ 2860.853989] CPU3 is up
[ 2860.856477] ACPI: Waking up from system sleep state S3
[ 2860.895571] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2860.895593] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2860.899069] PM: noirq resume of devices complete after 14.116 msecs
[ 2860.899267] PM: early resume of devices complete after 0.170 msecs
[ 2860.899396] nouveau  [     DRM] re-enabling device...
[ 2860.899411] nouveau  [     DRM] resuming kernel object tree...
[ 2860.899432] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 2860.902231] snd_hda_intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 2860.902804] sd 0:0:0:0: [sda] Starting disk
[ 2860.912051] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2860.912079] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2860.925710] atl1c 0000:03:00.0: irq 27 for MSI/MSI-X
[ 2861.088455] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2861.088463] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 2861.108550] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 2861.113045] nouveau  [     DRM] resuming client object trees...
[ 2861.113052] nouveau  [     DRM] resuming display...
[ 2861.115530] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 2861.142113] atkbd serio0: Failed to enable keyboard on isa0060/serio0
[ 2861.233948] ata3: SATA link down (SStatus 4 SControl 300)
[ 2861.245744] ata4: SATA link down (SStatus 0 SControl 300)
[ 2861.342198] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[ 2861.413195] nouveau  [     DRM] resuming console...
[ 2861.413904] PM: resume of devices complete after 514.458 msecs
[ 2861.414138] PM: Finishing wakeup.
[ 2861.414140] Restarting tasks ... done.
[ 2861.742397] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 2861.942457] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[ 2862.245899] ata2.01: failed to resume link (SControl 0)
[ 2862.245994] ata1.01: failed to resume link (SControl 0)
[ 2862.399373] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2862.399398] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2862.399420] ata2.01: link offline, clearing class 3 to NONE
[ 2862.499574] ata2.00: configured for UDMA/100
[ 2862.742721] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 2862.742727] psmouse serio1: sentelic: Unable get OPC state.
[ 2862.942789] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[ 2863.342925] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 2863.542993] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[ 2863.839847] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2863.839869] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2863.873752] ata1.00: configured for UDMA/133
[ 2863.914092] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<1000 Mbps Full Duplex>
[ 2863.943132] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 2863.946551] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2864.674063] psmouse serio1: hgpk: ID: 10 00 64
[ 2865.181291] psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.1.1, sn: 0, sw: 1.1.0-K
[ 2865.974905] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input20
[ 2867.249442] psmouse serio1: hgpk: ID: 10 00 64
[ 2867.759888] psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.1.1, sn: 0, sw: 1.1.0-K
[ 2868.552441] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input22

lsmod::

Module                  Size  Used by
mousedev               17096  0 
uvcvideo               69839  0 
videobuf2_vmalloc      12720  1 uvcvideo
videobuf2_memops       12471  1 videobuf2_vmalloc
nouveau              1160867  1 
videobuf2_core         39091  1 uvcvideo
v4l2_common            12867  1 videobuf2_core
videodev              120318  3 uvcvideo,v4l2_common,videobuf2_core
ttm                    67916  1 nouveau
media                  17894  2 uvcvideo,videodev
drm_kms_helper         71483  1 nouveau
drm                   212860  4 ttm,drm_kms_helper,nouveau
coretemp               12708  0 
iTCO_wdt               12727  0 
i2c_algo_bit           12640  1 nouveau
snd_hda_codec_hdmi     44455  4 
hwmon                  12818  2 coretemp,nouveau
intel_powerclamp       16978  0 
i2c_i801               16845  0 
iTCO_vendor_support    12585  1 iTCO_wdt
evdev                  17136  5 
kvm_intel             133522  0 
psmouse               106424  0 
snd_hda_codec_realtek    58068  1 
i2c_core               41134  7 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,nouveau,videodev
mxm_wmi                12467  1 nouveau
atl1c                  39978  0 
kvm                   368824  1 kvm_intel
lpc_ich                16616  0 
mac_hid                12569  0 
pcspkr                 12531  0 
crc32c_intel           12659  0 
serio_raw              12737  0 
snd_hda_codec_generic    57941  1 snd_hda_codec_realtek
thermal                17343  0 
snd_hda_intel          26011  0 
snd_hda_controller     26498  1 snd_hda_intel
snd_hda_codec          93726  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                78142  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
ac                     12627  0 
snd_timer              26106  1 snd_pcm
snd                    55101  8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
button                 12833  1 nouveau
video                  17718  1 nouveau
battery                13164  0 
acpi_cpufreq           17050  1 
intel_ips              17205  0 
shpchp                 30666  0 
intel_agp              17232  0 
intel_gtt              17584  1 intel_agp
agpgart                31256  4 drm,ttm,intel_agp,intel_gtt
soundcore              12895  2 snd,snd_hda_codec
wmi                    17147  2 mxm_wmi,nouveau
processor              27273  1 acpi_cpufreq
sch_fq_codel           17151  1 
ext4                  462828  3 
crc16                  12327  1 ext4
mbcache                17027  1 ext4
jbd2                   80964  1 ext4
sr_mod                 21568  0 
cdrom                  46828  1 sr_mod
sd_mod                 43039  5 
hid_generic            12369  0 
usbhid                 43790  0 
ata_generic            12450  0 
pata_acpi              12675  0 
hid                    89207  2 hid_generic,usbhid
atkbd                  21926  0 
libps2                 12643  2 atkbd,psmouse
ata_piix               29371  4 
libata                161789  3 pata_acpi,ata_generic,ata_piix
ehci_pci               12464  0 
ehci_hcd               65019  1 ehci_pci
scsi_mod              132306  3 libata,sd_mod,sr_mod
usbcore               170982  4 uvcvideo,ehci_hcd,ehci_pci,usbhid
usb_common             12621  1 usbcore
i8042                  17690  1 libps2
serio                  17914  6 serio_raw,atkbd,i8042,psmouse

lsusb::

Bus 002 Device 004: ID 0408:1322 Quanta Computer, Inc. 
Bus 002 Device 003: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

wandy · 2015-03-03 01:28:57

snakeroot wrote:

Centrino. Now there's a name I haven't heard in a very long time.
Anyway,it seems possible your card is the old Intel® Centrino® Wireless-N 1000.
The driver for this is iwldwm, which is compiled as a module in the Arch stock kernel. The firmware should be provided by the linux-firmware package (which replaces the old iwlwifi-1000-ucode package).
See here for more details:
https://wireless.wiki.kernel.org/en/use … rs/iwlwifi
Please run
lsmod | grep iwl
and tell us what you get.

I will read it. And I got nothing when I run

lsmod | grep iwl

And I paste the lsmod below.

Thank you for your time.

wandy · 2015-03-03 01:31:34

lucke wrote:

Is it enabled via a hardware switch/Fn key?

I think so. I push F2 during the bootup process and open the bios interface and saw the wireless swich is on. Do you mean this?

lucke · 2015-03-03 01:51:30

Usually you can disable WiFi on a laptop either by pressing one of the Fn keys (Fn key + one of the keys from the top row, look for a WiFi icon there) or by using a switch which is present somewhere on the case, usually at the front.

wandy · 2015-03-03 05:51:16

lucke wrote:

Usually you can disable WiFi on a laptop either by pressing one of the Fn keys (Fn key + one of the keys from the top row, look for a WiFi icon there) or by using a switch which is present somewhere on the case, usually at the front.

I have found any sort of switch you mean. In the Arch, the Fn keys will behave as in windows? Any way I tried it and it didn't work.

aaroncaffrey · 2015-03-03 06:16:05

@wandy - Atheros AR8131

wandy · 2015-03-03 06:32:45

aaroncaffrey wrote:

@wandy - Atheros AR8131

You mean "Qualcomm Atheros AR8131 Gigabit Ethernet"?

aaroncaffrey · 2015-03-03 07:00:08

If you can't find the particular information in the search enginges that will solve the issue, download and compile the compat drivers from source code. If the compat drivers are not working properly your best bet will be ndiswrapper.

These are my primary 3 steps to make any wireless/wifi card/chipset working, good luck.

Last edited by aaroncaffrey (2015-03-03 07:00:20)

Arch Linux

#1 2015-02-28 10:27:02

I cann't find my wireless card after installation.[SOLVED]

#2 2015-02-28 11:05:30

Re: I cann't find my wireless card after installation.[SOLVED]

#3 2015-02-28 11:53:23

Re: I cann't find my wireless card after installation.[SOLVED]

#4 2015-02-28 17:35:21

Re: I cann't find my wireless card after installation.[SOLVED]

#5 2015-02-28 18:40:07

Re: I cann't find my wireless card after installation.[SOLVED]

#6 2015-03-02 06:33:20

Re: I cann't find my wireless card after installation.[SOLVED]

#7 2015-03-02 06:34:23

Re: I cann't find my wireless card after installation.[SOLVED]

#8 2015-03-02 06:38:42

Re: I cann't find my wireless card after installation.[SOLVED]

#9 2015-03-02 20:51:37

Re: I cann't find my wireless card after installation.[SOLVED]

#10 2015-03-02 22:33:20

Re: I cann't find my wireless card after installation.[SOLVED]

#11 2015-03-02 22:35:52

Re: I cann't find my wireless card after installation.[SOLVED]

#12 2015-03-02 23:58:49

Re: I cann't find my wireless card after installation.[SOLVED]

#13 2015-03-03 01:09:32

Re: I cann't find my wireless card after installation.[SOLVED]

#14 2015-03-03 01:15:01

Re: I cann't find my wireless card after installation.[SOLVED]

#15 2015-03-03 01:18:36

Re: I cann't find my wireless card after installation.[SOLVED]

#16 2015-03-03 01:21:08

Re: I cann't find my wireless card after installation.[SOLVED]

#17 2015-03-03 01:21:21

Re: I cann't find my wireless card after installation.[SOLVED]

#18 2015-03-03 01:26:34

Re: I cann't find my wireless card after installation.[SOLVED]

#19 2015-03-03 01:28:57

Re: I cann't find my wireless card after installation.[SOLVED]

#20 2015-03-03 01:31:34

Re: I cann't find my wireless card after installation.[SOLVED]

#21 2015-03-03 01:51:30

Re: I cann't find my wireless card after installation.[SOLVED]

#22 2015-03-03 05:51:16

Re: I cann't find my wireless card after installation.[SOLVED]

#23 2015-03-03 06:16:05

Re: I cann't find my wireless card after installation.[SOLVED]

#24 2015-03-03 06:32:45

Re: I cann't find my wireless card after installation.[SOLVED]

#25 2015-03-03 07:00:08

Re: I cann't find my wireless card after installation.[SOLVED]

Board footer