Arch Linux

dam

Member

Registered: 2015-04-03

Posts: 2

SoundGraph Inc. iMON PAD Remote Controller - No receives IR codes

Hi,

I have problem with this remote controller, some info:

[root@htpc ~]# lsusb | grep iMON
Bus 008 Device 006: ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller

[root@htpc ~]# ir-keytable 
Found /sys/class/rc/rc0/ (/dev/input/event11) with:
	Driver imon, table rc-imon-mce
	Supported protocols: RC-6 
	Enabled protocols: RC-6 
	Name: iMON Remote (15c2:ffdc)
	bus: 3, vendor/product: 15c2:ffdc, version: 0x0000
	Repeat delay = 500 ms, repeat period = 125 ms

[root@htpc ~]# uname -a
Linux htpc 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux

[root@htpc ~]# uname -a
Linux htpc 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux
[root@htpc ~]# lsmod | grep lirc
lirc_imon              17057  0 
lirc_dev               16951  1 lirc_imon
rc_core                22437  4 imon,lirc_dev,rc_imon_mce
usbcore               199382  15 uas,imon,btusb,lirc_imon,usb_storage,usbserial,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,pl2303,usbhid,xhci_hcd,xhci_pci

Lirc starting ok, but irw or ir-keytable not receiving any codes

I try Windows XP and remote controller works fine.
When i switched iMON from laptop with Windows to htpc witch Arch then irw receives codes ok. But after Arch reboot not receiving again.

Whoever uses this remote controller and had a similar problem?

Sorry for my bad English.

Last edited by dam (2015-04-03 20:30:55)