You are not logged in.
Pages: 1
Hi,
its longtime i want setting my fan control.
if you want me help i block to the starting of fancontrol he start and dont finish.
here is my config :
sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +36.0°C (high = +78.0°C, crit = +100.0°C)
Core 1: +37.0°C (high = +78.0°C, crit = +100.0°C)
w83667hg-isa-0290
Adapter: ISA adapter
Vcore: +1.08 V (min = +0.00 V, max = +1.74 V)
in1: +1.73 V (min = +0.13 V, max = +1.29 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.30 V (min = +2.98 V, max = +3.63 V)
in4: +1.69 V (min = +0.28 V, max = +0.30 V) ALARM
in5: +2.04 V (min = +0.56 V, max = +0.27 V) ALARM
3VSB: +3.39 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan2: 4440 RPM (min = 620 RPM, div = 16)
fan3: 0 RPM (min = 2109 RPM, div = 128) ALARM
fan4: 0 RPM (min = 1318 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
temp1: +27.0°C (high = +9.0°C, hyst = +76.0°C) ALARM sensor = thermistor
temp2: +23.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
temp3: +27.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +0.000 V
intrusion0: OK
fancontrol by pwmconfig
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=
DEVNAME=
FCTEMPS=
FCFANS=
MINTEMP=20
MAXTEMP=50
MINSTART=20
MINSTOP=
MINPWM=50
MAXPWM=150
fancontrol by me
INTERVAL=1
DEVPATH=hwmon1=devices/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.656
DEVNAME=hwmon1=coretemp hwmon1=w83667hg
FCTEMPS=hwmon1/device/pwm1=hwmon0/device/temp3_input
FCFANS=hwmon1/device/pwm1=hwmon1/device/fan2_input
MINTEMP=hwmon1/device/pwm1=20
MAXTEMP=hwmon1/device/pwm1=50
MINSTART=hwmon1/device/pwm1=20
MINSTOP=hwmon1/device/pwm1=105
MINPWM=hwmon1/device/pwm1=50
MAXPWM=hwmon1/device/pwm1=150
i have also modified in grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_enforce_resources=lax"
Very thank for help.
Offline
Pages: 1