You are not logged in.

Pages: 1

#1 2015-04-22 13:57:24

jediintraining
Member
Registered: 2015-04-22
Posts: 5

Problems with Elantech trackpad G750JW

I have been having issues with the trackpad on my Asus G750JW.  The physical buttons do not work and I am not sure how to fix it. I have tried various synaptics settings and reinstalling drivers and such.

xinput outputs:

   ⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
   ⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
   ⎜   ↳ PIXART USB OPTICAL MOUSE                	id=9	[slave  pointer  (2)]
   ⎜   ↳ ETPS/2 Elantech Touchpad                	id=13	[slave  pointer  (2)]
   ⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
        ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
        ↳ Power Button                            	id=6	[slave  keyboard (3)]
        ↳ Video Bus                               	id=7	[slave  keyboard (3)]  
        ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
        ↳ USB2.0 UVC HD Webcam                    	id=10	[slave  keyboard (3)]
        ↳ Asus WMI hotkeys                        	id=11	[slave  keyboard (3)]
        ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]

xinput list 13 outputs:

   ETPS/2 Elantech Touchpad                	id=13	[slave  pointer  (2)]
   	Reporting 10 classes:
		Class originated from: 13. Type: XIButtonClass
   		Buttons supported: 12
   		Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button        Horiz Wheel Left" "Button Horiz Wheel Right" None None None None None
      		Button state:
   		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 0:
   		  Label: Rel X
   		  Range: 0.000000 - 3591.000000
   		  Resolution: 33000 units/m
   		  Mode: relative
    		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 1:
   		  Label: Rel Y
   		  Range: 0.000000 - 1881.000000
   		  Resolution: 32000 units/m
   		  Mode: relative
   		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 2:
   		  Label: Rel Horiz Scroll
   		  Range: 0.000000 - -1.000000
   		  Resolution: 0 units/m
   		  Mode: relative
   		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 3:
   		  Label: Rel Vert Scroll
   		  Range: 0.000000 - -1.000000
   		  Resolution: 0 units/m
   		  Mode: relative
   		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 4:
   		  Label: Abs MT Touch Major
   		  Range: 0.000000 - 2565.000000
   		  Resolution: 0 units/m
   		  Mode: absolute
   		  Current value: 0.000000
   		Class originated from: 13. Type: XIValuatorClass
   		Detail for Valuator 5:
   		  Label: Abs MT Pressure
   		  Range: 0.000000 - 255.000000
   		  Resolution: 0 units/m
   		  Mode: absolute
   		  Current value: 0.000000
   		Class originated from: 13. Type: XIScrollClass
   		Scroll info for Valuator 2
   		  type: 2 (horizontal)
   		  increment: 83.000000
   		  flags: 0x0
   		Class originated from: 13. Type: XIScrollClass
   		Scroll info for Valuator 3
   		  type: 1 (vertical)
   		  increment: 80.000000
   		  flags: 0x0
   		Class originated from: 13. Type: XITouchClass
   		Touch mode: dependent
   		Max number of touches: 5

My 10-evdev.conf:

   #
   # Catch-all evdev loader for udev-based systems
   # We don't simply match on any device since that also adds accelerometers
   # and other devices that we don't really want to use. The list below
   # matches everything but joysticks.

   Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
   EndSection

   Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
   EndSection

  Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
   EndSection

  Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
   EndSection

  Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
   EndSection

And my 50-synaptics.conf:

     GNU nano 2.4.1                File: /etc/X11/xorg.conf.d/50-synaptics.conf                                       

   # Example xorg.conf.d snippet that assigns the touchpad driver
   # to all touchpads. See xorg.conf.d(5) for more information on
   # InputClass.
   # DO NOT EDIT THIS FILE, your distribution will likely overwrite
   # it when updating. Copy (and rename) this file into
   # /etc/X11/xorg.conf.d first.
   # Additional options may be added in the form of
   #   Option "OptionName" "value"
   #

   Section "InputClass"
   #       Identifier "ETPS/2 Elantech Touchpad"
           Identifier "touchpad catchall"
           Driver "synaptics"
           MatchIsTouchpad "on"
           Option "TapButton1" "1"
           Option "TapButton2" "2"
           Option "TapButton3" "3"
           Option "EmulationMidButtonTime" "0"
   # This option is recommend on all Linux systems using evdev, but cannot be 
   # enabled by default. See the following link for details:
   # [url]http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html[/url]
           MatchDevicePath "/dev/input/event*"
   EndSection

   #Section "InputClass"
   #        Identifier "touchpad ignore duplicates"
   #        MatchIsTouchpad "on"
   #        MatchOS "Linux"
   #        MatchDevicePath "/dev/input/mouse*"
   #        Option "Ignore" "on"
   #EndSection

   # This option enables the bottom right corner to be a right button on clickpads
   # and the right and middle top areas to be right / middle buttons on clickpads
   # with a top button area.
   # This option is only interpreted by clickpads.
   #Section "InputClass"
   #        Identifier "Default clickpad buttons"
   #        MatchDriver "synaptics"
   #        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
   #        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
   #EndSection

   # This option disables software buttons on Apple touchpads.
   # This option is only interpreted by clickpads.
   #Section "InputClass"
   #        Identifier "Disable clickpad buttons on Apple touchpads"
   #        MatchProduct "Apple|bcm5974"
   #        MatchDriver "synaptics"
   #        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
   #EndSection

Edit: I forgot my Xorg.0.log. Also fixing formatting. Here it is:

[     5.569] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[     5.569] X Protocol Version 11, Revision 0
[     5.569] Build Operating System: Linux 3.19.2-1-ARCH x86_64 
[     5.569] Current Operating System: Linux localhost 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[     5.569] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[     5.569] Build Date: 14 April 2015  10:34:18AM
[     5.569]  
[     5.569] Current version of pixman: 0.32.6
[     5.569] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[     5.569] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.569] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 22 04:03:01 2015
[     5.581] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.581] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.584] (==) No Layout section.  Using the first Screen section.
[     5.584] (==) No screen section available. Using defaults.
[     5.584] (**) |-->Screen "Default Screen Section" (0)
[     5.584] (**) |   |-->Monitor "<default monitor>"
[     5.585] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.585] (==) Automatically adding devices
[     5.585] (==) Automatically enabling devices
[     5.585] (==) Automatically adding GPU devices
[     5.602] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[     5.602] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.602] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.602] (II) Loader magic: 0x815d80
[     5.602] (II) Module ABI versions:
[     5.602] 	X.Org ANSI C Emulation: 0.4
[     5.602] 	X.Org Video Driver: 19.0
[     5.602] 	X.Org XInput driver : 21.0
[     5.602] 	X.Org Server Extension : 9.0
[     5.603] (EE) systemd-logind: failed to get session: PID 427 does not belong to any known session
[     5.603] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.604] (--) PCI:*(0:1:0:0) 10de:11e2:1043:119d rev 161, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.604] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.604] (II) LoadModule: "glx"
[     5.608] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.627] (II) Module glx: vendor="X.Org Foundation"
[     5.627] 	compiled for 1.17.1, module version = 1.0.0
[     5.627] 	ABI class: X.Org Server Extension, version 9.0
[     5.627] (==) AIGLX enabled
[     5.627] (==) Matched nouveau as autoconfigured driver 0
[     5.627] (==) Matched nv as autoconfigured driver 1
[     5.627] (==) Matched nouveau as autoconfigured driver 2
[     5.627] (==) Matched nv as autoconfigured driver 3
[     5.627] (==) Matched modesetting as autoconfigured driver 4
[     5.627] (==) Matched fbdev as autoconfigured driver 5
[     5.627] (==) Matched vesa as autoconfigured driver 6
[     5.627] (==) Assigned the driver to the xf86ConfigLayout
[     5.627] (II) LoadModule: "nouveau"
[     5.627] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.630] (II) Module nouveau: vendor="X.Org Foundation"
[     5.630] 	compiled for 1.17.0, module version = 1.0.11
[     5.630] 	Module class: X.Org Video Driver
[     5.630] 	ABI class: X.Org Video Driver, version 19.0
[     5.630] (II) LoadModule: "nv"
[     5.631] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[     5.632] (II) Module nv: vendor="X.Org Foundation"
[     5.632] 	compiled for 1.17.0, module version = 2.1.20
[     5.632] 	Module class: X.Org Video Driver
[     5.632] 	ABI class: X.Org Video Driver, version 19.0
[     5.632] (II) LoadModule: "modesetting"
[     5.632] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.633] (II) Module modesetting: vendor="X.Org Foundation"
[     5.633] 	compiled for 1.17.1, module version = 1.17.1
[     5.633] 	Module class: X.Org Video Driver
[     5.633] 	ABI class: X.Org Video Driver, version 19.0
[     5.633] (II) LoadModule: "fbdev"
[     5.633] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.634] (II) Module fbdev: vendor="X.Org Foundation"
[     5.634] 	compiled for 1.17.0, module version = 0.4.4
[     5.634] 	Module class: X.Org Video Driver
[     5.634] 	ABI class: X.Org Video Driver, version 19.0
[     5.634] (II) LoadModule: "vesa"
[     5.634] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.635] (II) Module vesa: vendor="X.Org Foundation"
[     5.635] 	compiled for 1.17.0, module version = 2.3.2
[     5.635] 	Module class: X.Org Video Driver
[     5.635] 	ABI class: X.Org Video Driver, version 19.0
[     5.635] (II) NOUVEAU driver 
[     5.635] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.635] 	RIVA TNT        (NV04)
[     5.635] 	RIVA TNT2       (NV05)
[     5.635] 	GeForce 256     (NV10)
[     5.635] 	GeForce 2       (NV11, NV15)
[     5.635] 	GeForce 4MX     (NV17, NV18)
[     5.635] 	GeForce 3       (NV20)
[     5.635] 	GeForce 4Ti     (NV25, NV28)
[     5.635] 	GeForce FX      (NV3x)
[     5.635] 	GeForce 6       (NV4x)
[     5.635] 	GeForce 7       (G7x)
[     5.635] 	GeForce 8       (G8x)
[     5.635] 	GeForce GTX 200 (NVA0)
[     5.635] 	GeForce GTX 400 (NVC0)
[     5.635] (II) NOUVEAU driver 
[     5.635] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.635] 	RIVA TNT        (NV04)
[     5.635] 	RIVA TNT2       (NV05)
[     5.635] 	GeForce 256     (NV10)
[     5.635] 	GeForce 2       (NV11, NV15)
[     5.635] 	GeForce 4MX     (NV17, NV18)
[     5.635] 	GeForce 3       (NV20)
[     5.635] 	GeForce 4Ti     (NV25, NV28)
[     5.635] 	GeForce FX      (NV3x)
[     5.635] 	GeForce 6       (NV4x)
[     5.635] 	GeForce 7       (G7x)
[     5.635] 	GeForce 8       (G8x)
[     5.635] 	GeForce GTX 200 (NVA0)
[     5.635] 	GeForce GTX 400 (NVC0)
[     5.635] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.635] (II) FBDEV: driver for framebuffer: fbdev
[     5.635] (II) VESA: driver for VESA chipsets: vesa
[     5.635] (++) using VT number 7

[     5.640] (II) [drm] nouveau interface version: 1.2.1
[     5.640] (WW) Falling back to old probe method for modesetting
[     5.640] (WW) Falling back to old probe method for fbdev
[     5.640] (II) Loading sub module "fbdevhw"
[     5.640] (II) LoadModule: "fbdevhw"
[     5.641] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.641] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.641] 	compiled for 1.17.1, module version = 0.0.2
[     5.641] 	ABI class: X.Org Video Driver, version 19.0
[     5.641] (WW) Falling back to old probe method for vesa
[     5.641] (II) Loading sub module "dri2"
[     5.641] (II) LoadModule: "dri2"
[     5.641] (II) Module "dri2" already built-in
[     5.641] (--) NOUVEAU(0): Chipset: "NVIDIA NVE6"
[     5.641] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.641] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     5.641] (==) NOUVEAU(0): RGB weight 888
[     5.641] (==) NOUVEAU(0): Default visual is TrueColor
[     5.642] (==) NOUVEAU(0): Using HW cursor
[     5.642] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[     5.642] (==) NOUVEAU(0): Page flipping enabled
[     5.642] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[     5.642] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[     5.642] (II) NOUVEAU(0): Initializing outputs ...
[     5.673] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[     5.694] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     5.696] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[     5.803] (II) NOUVEAU(0): Output DP-1 has no monitor section
[     5.803] (II) NOUVEAU(0): 4 crtcs needed for screen.
[     5.806] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[     5.806] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[     5.807] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[     5.807] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[     5.837] (II) NOUVEAU(0): EDID for output LVDS-1
[     5.837] (II) NOUVEAU(0): Manufacturer: AUO  Model: 219d  Serial#: 0
[     5.837] (II) NOUVEAU(0): Year: 2012  Week: 0
[     5.837] (II) NOUVEAU(0): EDID Version: 1.4
[     5.837] (II) NOUVEAU(0): Digital Display Input
[     5.837] (II) NOUVEAU(0): 6 bits per channel
[     5.837] (II) NOUVEAU(0): Digital interface is undefined
[     5.837] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[     5.837] (II) NOUVEAU(0): Gamma: 2.20
[     5.837] (II) NOUVEAU(0): No DPMS capabilities specified
[     5.837] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 
[     5.837] (II) NOUVEAU(0): First detailed timing is preferred mode
[     5.837] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[     5.837] (II) NOUVEAU(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[     5.837] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[     5.837] (II) NOUVEAU(0): Manufacturer's mask: 0
[     5.837] (II) NOUVEAU(0): Supported detailed timing:
[     5.837] (II) NOUVEAU(0): clock: 141.0 MHz   Image Size:  381 x 214 mm
[     5.837] (II) NOUVEAU(0): h_active: 1920  h_sync: 1968  h_sync_end 2068 h_blank_end 2112 h_border: 0
[     5.837] (II) NOUVEAU(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1112 v_border: 0
[     5.837] (II) NOUVEAU(0): Unknown vendor-specific block f
[     5.837] (II) NOUVEAU(0):  AUO
[     5.837] (II) NOUVEAU(0):  B173HW02 V1
[     5.837] (II) NOUVEAU(0): EDID (in hex):
[     5.837] (II) NOUVEAU(0): 	00ffffffffffff0006af9d2100000000
[     5.837] (II) NOUVEAU(0): 	001601049026157802c8959e57549226
[     5.837] (II) NOUVEAU(0): 	0f505400000001010101010101010101
[     5.837] (II) NOUVEAU(0): 	010101010101143780c0703820403064
[     5.837] (II) NOUVEAU(0): 	36007dd6100000180000000f00000000
[     5.837] (II) NOUVEAU(0): 	00000000000000000020000000fe0041
[     5.837] (II) NOUVEAU(0): 	554f0a202020202020202020000000fe
[     5.837] (II) NOUVEAU(0): 	004231373348573032205631200a0051
[     5.837] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[     5.837] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[     5.837] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[     5.837] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[     5.858] (II) NOUVEAU(0): EDID for output VGA-1
[     5.860] (II) NOUVEAU(0): EDID for output HDMI-1
[     5.966] (II) NOUVEAU(0): EDID for output DP-1
[     5.966] (II) NOUVEAU(0): Output LVDS-1 connected
[     5.966] (II) NOUVEAU(0): Output VGA-1 disconnected
[     5.966] (II) NOUVEAU(0): Output HDMI-1 disconnected
[     5.966] (II) NOUVEAU(0): Output DP-1 disconnected
[     5.966] (II) NOUVEAU(0): Using exact sizes for initial modes
[     5.966] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1920x1080
[     5.966] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     5.966] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[     5.966] (**) NOUVEAU(0):  Driver mode "1920x1080": 141.0 MHz (scaled from 0.0 MHz), 66.8 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[     5.966] (**) NOUVEAU(0):  Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[     5.966] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[     5.966] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[     5.966] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[     5.966] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[     5.966] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[     5.966] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[     5.966] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[     5.966] (==) NOUVEAU(0): DPI set to (96, 96)
[     5.966] (II) Loading sub module "fb"
[     5.966] (II) LoadModule: "fb"
[     5.966] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.968] (II) Module fb: vendor="X.Org Foundation"
[     5.968] 	compiled for 1.17.1, module version = 1.0.0
[     5.968] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.968] (II) Loading sub module "shadowfb"
[     5.968] (II) LoadModule: "shadowfb"
[     5.969] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     5.969] (II) Module shadowfb: vendor="X.Org Foundation"
[     5.969] 	compiled for 1.17.1, module version = 1.0.0
[     5.969] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.969] (II) UnloadModule: "nv"
[     5.969] (II) Unloading nv
[     5.969] (II) UnloadModule: "modesetting"
[     5.969] (II) Unloading modesetting
[     5.969] (II) UnloadModule: "fbdev"
[     5.969] (II) Unloading fbdev
[     5.969] (II) UnloadSubModule: "fbdevhw"
[     5.969] (II) Unloading fbdevhw
[     5.969] (II) UnloadModule: "vesa"
[     5.969] (II) Unloading vesa
[     5.969] (--) Depth 24 pixmap format is 32 bpp
[     8.091] (EE) NOUVEAU(0): Failed to initialise context object: 2D_NVC0 (0)
[     8.091] (EE) NOUVEAU(0): Error initialising acceleration.  Falling back to NoAccel
[     8.091] (**) NOUVEAU(0): [COPY] acceleration disabled
[     8.099] (==) NOUVEAU(0): Backing store enabled
[     8.099] (==) NOUVEAU(0): Silken mouse enabled
[     8.100] (==) NOUVEAU(0): DPMS enabled
[     8.100] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.101] (--) RandR disabled
[     8.105] (II) AIGLX: Screen 0 is not DRI2 capable
[     8.105] (EE) AIGLX: reverting to software rendering
[     8.223] (II) AIGLX: Loaded and initialized swrast
[     8.223] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     8.226] (II) NOUVEAU(0): NVEnterVT is called.
[     8.253] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[     8.254] resize called 1920 1080
[     8.371] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     8.371] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.371] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.371] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.371] (II) LoadModule: "evdev"
[     8.371] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.374] (II) Module evdev: vendor="X.Org Foundation"
[     8.374] 	compiled for 1.17.1, module version = 2.9.2
[     8.374] 	Module class: X.Org XInput Driver
[     8.374] 	ABI class: X.Org XInput driver, version 21.0
[     8.374] (II) Using input driver 'evdev' for 'Power Button'
[     8.374] (**) Power Button: always reports core events
[     8.374] (**) evdev: Power Button: Device: "/dev/input/event4"
[     8.374] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.374] (--) evdev: Power Button: Found keys
[     8.374] (II) evdev: Power Button: Configuring as keyboard
[     8.374] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[     8.374] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.374] (**) Option "xkb_rules" "evdev"
[     8.374] (**) Option "xkb_model" "pc104"
[     8.374] (**) Option "xkb_layout" "us"
[     8.387] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     8.387] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.387] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.387] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.387] (II) Using input driver 'evdev' for 'Video Bus'
[     8.387] (**) Video Bus: always reports core events
[     8.387] (**) evdev: Video Bus: Device: "/dev/input/event6"
[     8.387] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.387] (--) evdev: Video Bus: Found keys
[     8.387] (II) evdev: Video Bus: Configuring as keyboard
[     8.387] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:63/LNXVIDEO:00/input/input11/event6"
[     8.387] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.387] (**) Option "xkb_rules" "evdev"
[     8.387] (**) Option "xkb_model" "pc104"
[     8.387] (**) Option "xkb_layout" "us"
[     8.387] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     8.387] (II) No input driver specified, ignoring this device.
[     8.387] (II) This device may have been added with another device file.
[     8.388] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     8.388] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.388] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     8.388] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.388] (II) Using input driver 'evdev' for 'Sleep Button'
[     8.388] (**) Sleep Button: always reports core events
[     8.388] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[     8.388] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     8.388] (--) evdev: Sleep Button: Found keys
[     8.388] (II) evdev: Sleep Button: Configuring as keyboard
[     8.388] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[     8.388] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     8.388] (**) Option "xkb_rules" "evdev"
[     8.388] (**) Option "xkb_model" "pc104"
[     8.388] (**) Option "xkb_layout" "us"
[     8.388] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[     8.388] (II) No input driver specified, ignoring this device.
[     8.388] (II) This device may have been added with another device file.
[     8.388] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[     8.388] (II) No input driver specified, ignoring this device.
[     8.388] (II) This device may have been added with another device file.
[     8.388] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event1)
[     8.388] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[     8.388] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[     8.388] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[     8.388] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[     8.388] (**) PIXART USB OPTICAL MOUSE: always reports core events
[     8.388] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event1"
[     8.440] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[     8.440] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[     8.440] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[     8.440] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[     8.440] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[     8.440] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[     8.440] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[     8.440] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[     8.440] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:093A:2510.0001/input/input5/event1"
[     8.440] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 9)
[     8.440] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[     8.440] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[     8.440] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[     8.440] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[     8.440] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[     8.440] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[     8.440] (II) No input driver specified, ignoring this device.
[     8.440] (II) This device may have been added with another device file.
[     8.440] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event10)
[     8.440] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[     8.440] (**) USB2.0 UVC HD Webcam: Applying InputClass "libinput keyboard catchall"
[     8.440] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[     8.440] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[     8.440] (**) USB2.0 UVC HD Webcam: always reports core events
[     8.440] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event10"
[     8.440] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[     8.440] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[     8.440] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[     8.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input18/event10"
[     8.440] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[     8.440] (**) Option "xkb_rules" "evdev"
[     8.440] (**) Option "xkb_model" "pc104"
[     8.440] (**) Option "xkb_layout" "us"
[     8.441] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[     8.441] (II) No input driver specified, ignoring this device.
[     8.441] (II) This device may have been added with another device file.
[     8.441] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[     8.441] (II) No input driver specified, ignoring this device.
[     8.441] (II) This device may have been added with another device file.
[     8.441] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[     8.441] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.441] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     8.441] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.441] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[     8.441] (**) Asus WMI hotkeys: always reports core events
[     8.441] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[     8.441] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[     8.441] (--) evdev: Asus WMI hotkeys: Found keys
[     8.441] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[     8.441] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event7"
[     8.441] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[     8.441] (**) Option "xkb_rules" "evdev"
[     8.441] (**) Option "xkb_model" "pc104"
[     8.441] (**) Option "xkb_layout" "us"
[     8.441] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     8.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.441] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     8.441] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.441] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.441] (**) AT Translated Set 2 keyboard: always reports core events
[     8.441] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     8.441] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.441] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.441] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.441] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     8.441] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     8.441] (**) Option "xkb_rules" "evdev"
[     8.441] (**) Option "xkb_model" "pc104"
[     8.441] (**) Option "xkb_layout" "us"
[     8.442] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     8.442] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     8.442] (II) LoadModule: "synaptics"
[     8.442] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     8.443] (II) Module synaptics: vendor="X.Org Foundation"
[     8.443] 	compiled for 1.17.1, module version = 1.8.2
[     8.443] 	Module class: X.Org XInput Driver
[     8.443] 	ABI class: X.Org XInput driver, version 21.0
[     8.443] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     8.443] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.443] (**) Option "Device" "/dev/input/event11"
[     8.543] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3591 (res 33)
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1881 (res 32)
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     8.543] (**) Option "TapButton1" "1"
[     8.543] (**) Option "TapButton2" "2"
[     8.543] (**) Option "TapButton3" "3"
[     8.543] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     8.543] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event11"
[     8.596] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[     8.596] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     8.596] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     8.596] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.049
[     8.596] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     8.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     8.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     8.597] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     8.597] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.597] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     8.597] ip Sync Battle Season 1 Episode 3 Full Episode : S1xE3 Anne Hathaway vs. Emily Blunt Live HD TV(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     8.597] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     8.597] (II) No input driver specified, ignoring this device.
[     8.597] (II) This device may have been added with another device file.
[     8.599] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[     8.599] (II) No input driver specified, ignoring this device.
[     8.599] (II) This device may have been added with another device file.
[     8.599] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[     8.599] (II) No input driver specified, ignoring this device.
[     8.599] (II) This device may have been added with another device file.
[     8.599] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[     8.599] (II) No input driver specified, ignoring this device.
[     8.599] (II) This device may have been added with another device file.
[     8.599] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[     8.599] (II) No input driver specified, ignoring this device.
[     8.599] (II) This device may have been added with another device file.
[    14.220] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    14.220] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.220] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    14.382] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    14.382] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.382] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    16.196] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    16.196] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.196] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    16.354] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    16.354] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.354] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    16.569] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    16.569] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.569] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    16.728] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    16.729] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.729] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    16.928] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    16.928] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.928] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    17.087] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    17.087] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    17.087] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    17.378] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    17.378] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    17.378] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    17.537] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    17.537] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    17.537] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    18.204] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    18.204] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    18.204] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    18.365] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    18.365] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    18.365] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    18.767] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    18.767] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    18.767] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    19.120] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    19.120] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    19.120] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    19.281] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    19.281] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    19.281] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    23.934] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    23.934] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    23.934] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    92.599] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    92.599] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    92.599] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)
[    92.759] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8605
[    92.759] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    92.759] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  141.00  1920 1968 2068 2112  1080 1083 1089 1112 -hsync -vsync (66.8 kHz eP)

Last edited by jediintraining (2015-04-22 14:28:09)

Offline

#2 2015-04-22 14:19:17

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,546

Re: Problems with Elantech trackpad G750JW

In mercy's name *PLEASE* edit your post and get rid of  that giant highlighted wall of text.   Use BBCode code tags around file contents and program output.  It will use a monospaced font so columns will line up, and you will have a nice scroll bar for the long passages.  Use separate code tags around each file.

Thank you.
The Management.

Edit:  I see you were editing as I was posting.  Please use code tags instead of quote tags smile

Last edited by ewaller (2015-04-22 14:20:29)

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#3 2015-04-22 14:23:55

jediintraining
Member
Registered: 2015-04-22
Posts: 5

Re: Problems with Elantech trackpad G750JW

Sorry I am still new to this forum so I am trying to figure out the formatting still.  I will go ahead and change to code tags.
Edit: Fixed it.  I hope I did not burn your eyes to bad while figuring out the formatting.

Last edited by jediintraining (2015-04-22 14:29:58)

Offline

#4 2015-04-22 14:28:27

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,546

Re: Problems with Elantech trackpad G750JW

Are you sure they really are physical buttons, or does the touch surface actually extend into that area?  Some trackpads just have pictures of buttons and are handled as touch events.  Others really do have physical switches.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#5 2015-04-22 14:29:32

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,546

Re: Problems with Elantech trackpad G750JW

jediintraining wrote:

Sorry I am still new to this forum so I am trying to figure out the formatting still.  I will go ahead and change to code tags.

No problem smile    It looks much better now.

Welcome to Arch Linux.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#6 2015-04-22 14:31:41

jediintraining
Member
Registered: 2015-04-22
Posts: 5

Re: Problems with Elantech trackpad G750JW

ewaller wrote:

Are you sure they really are physical buttons, or does the touch surface actually extend into that area?  Some trackpads just have pictures of buttons and are handled as touch events.  Others really do have physical switches.

They are physical buttons, the touch surface end at the top of the buttons. Here is the link to the Newegg listing if that helps: http://www.newegg.com/Product/Product.a … 6834231333

Last edited by jediintraining (2015-04-22 14:36:37)

Offline

#7 2015-04-28 22:21:14

jediintraining
Member
Registered: 2015-04-22
Posts: 5

Re: Problems with Elantech trackpad G750JW

Any ideas?  I am not sure what else to try.

Offline

Pages: 1

Board footer

Powered by FluxBB