vmware 11.1 kernel 3.19 Failed to build vmnet

joosca77 · 2015-04-25 02:44:03

I have no idea what to do from here. I have searched and searched for a solution but cannot find anything other than references to the Arch Vmware Wiki guide showing how to patch for kernel 3.19 which as you will see does not fix my issue. I have installed Vmware and installed Vmware-Patch. I then try an run vmware and get this:

$ vmware
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-3LOAJb/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.19.3-3-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.19.3-3-ARCH/build'
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/task.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-3LOAJb/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-3LOAJb/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-3LOAJb/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-3LOAJb/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-3LOAJb/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.19.3-3-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-3LOAJb/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-3LOAJb/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-3LOAJb/vmmon-only'
make: Entering directory '/tmp/modconfig-3LOAJb/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.19.3-3-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.19.3-3-ARCH/build'
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/driver.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/hub.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/userif.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/netif.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/procfs.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/bridge.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/smac.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-3LOAJb/vmnet-only/vnetUserListener.o
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-3LOAJb/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-3LOAJb/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2251:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-3LOAJb/vmnet-only/net.h:38:0,
from /tmp/modconfig-3LOAJb/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-3LOAJb/vmnet-only/netif.c:42:
/tmp/modconfig-3LOAJb/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
/tmp/modconfig-3LOAJb/vmnet-only/userif.c: In function 'VNetCopyDatagram':
/tmp/modconfig-3LOAJb/vmnet-only/userif.c:527:4: error: implicit declaration of function 'skb_copy_datagram_iovec' [-Werror=implicit-function-declaration]
return skb_copy_datagram_iovec(skb, 0, &iov, len);
^
/tmp/modconfig-3LOAJb/vmnet-only/driver.c: In function 'VNetFileOpUnlockedIoctl':
/tmp/modconfig-3LOAJb/vmnet-only/driver.c:1202:20: error: 'struct file' has no member named 'f_dentry'
if (filp && filp->f_dentry) {
^
/tmp/modconfig-3LOAJb/vmnet-only/driver.c:1203:19: error: 'struct file' has no member named 'f_dentry'
inode = filp->f_dentry->d_inode;
^
scripts/Makefile.build:257: recipe for target '/tmp/modconfig-3LOAJb/vmnet-only/driver.o' failed
make[2]: *** [/tmp/modconfig-3LOAJb/vmnet-only/driver.o] Error 1
make[2]: *** Waiting for unfinished jobs....
In file included from /tmp/modconfig-3LOAJb/vmnet-only/net.h:38:0,
from /tmp/modconfig-3LOAJb/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-3LOAJb/vmnet-only/bridge.c:52:
/tmp/modconfig-3LOAJb/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-3LOAJb/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-3LOAJb/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2251:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
cc1: some warnings being treated as errors
scripts/Makefile.build:257: recipe for target '/tmp/modconfig-3LOAJb/vmnet-only/userif.o' failed
make[2]: *** [/tmp/modconfig-3LOAJb/vmnet-only/userif.o] Error 1
Makefile:1382: recipe for target '_module_/tmp/modconfig-3LOAJb/vmnet-only' failed
make[1]: *** [_module_/tmp/modconfig-3LOAJb/vmnet-only] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.19.3-3-ARCH/build'
Makefile:120: recipe for target 'vmnet.ko' failed
make: *** [vmnet.ko] Error 2
make: Leaving directory '/tmp/modconfig-3LOAJb/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet failed
VMware Authentication Daemon done

When I install the patch manually following the vmware wiki I get this:

$ sudo vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-rl4cqO/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.19.3-3-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.19.3-3-ARCH/build'
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/task.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-rl4cqO/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-rl4cqO/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-rl4cqO/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-rl4cqO/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-rl4cqO/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.19.3-3-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-rl4cqO/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-rl4cqO/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-rl4cqO/vmmon-only'
make: Entering directory '/tmp/modconfig-rl4cqO/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.19.3-3-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.19.3-3-ARCH/build'
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/driver.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/hub.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/userif.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/netif.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/procfs.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/bridge.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/smac.o
CC [M] /tmp/modconfig-rl4cqO/vmnet-only/vnetUserListener.o
/tmp/modconfig-rl4cqO/vmnet-only/userif.c: In function 'VNetCopyDatagram':
/tmp/modconfig-rl4cqO/vmnet-only/userif.c:527:4: error: implicit declaration of function 'skb_copy_datagram_iovec' [-Werror=implicit-function-declaration]
return skb_copy_datagram_iovec(skb, 0, &iov, len);
^
In file included from /tmp/modconfig-rl4cqO/vmnet-only/net.h:38:0,
from /tmp/modconfig-rl4cqO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-rl4cqO/vmnet-only/bridge.c:52:
/tmp/modconfig-rl4cqO/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-rl4cqO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-rl4cqO/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2251:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
/tmp/modconfig-rl4cqO/vmnet-only/driver.c: In function 'VNetFileOpUnlockedIoctl':
/tmp/modconfig-rl4cqO/vmnet-only/driver.c:1202:20: error: 'struct file' has no member named 'f_dentry'
if (filp && filp->f_dentry) {
^
/tmp/modconfig-rl4cqO/vmnet-only/driver.c:1203:19: error: 'struct file' has no member named 'f_dentry'
inode = filp->f_dentry->d_inode;
^
scripts/Makefile.build:257: recipe for target '/tmp/modconfig-rl4cqO/vmnet-only/driver.o' failed
make[2]: *** [/tmp/modconfig-rl4cqO/vmnet-only/driver.o] Error 1
make[2]: *** Waiting for unfinished jobs....
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-rl4cqO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-rl4cqO/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2251:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-rl4cqO/vmnet-only/net.h:38:0,
from /tmp/modconfig-rl4cqO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-rl4cqO/vmnet-only/netif.c:42:
/tmp/modconfig-rl4cqO/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
cc1: some warnings being treated as errors
scripts/Makefile.build:257: recipe for target '/tmp/modconfig-rl4cqO/vmnet-only/userif.o' failed
make[2]: *** [/tmp/modconfig-rl4cqO/vmnet-only/userif.o] Error 1
Makefile:1382: recipe for target '_module_/tmp/modconfig-rl4cqO/vmnet-only' failed
make[1]: *** [_module_/tmp/modconfig-rl4cqO/vmnet-only] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.19.3-3-ARCH/build'
Makefile:120: recipe for target 'vmnet.ko' failed
make: *** [vmnet.ko] Error 2
make: Leaving directory '/tmp/modconfig-rl4cqO/vmnet-only'
Unable to install all modules. See log for details.

The log contains:

2015-04-24T20:30:52.624-06:00| modconfig| I120: Log for appLoader pid=12365 version=11.1.0 build=build-2496824 option=Release
2015-04-24T20:30:52.624-06:00| modconfig| I120: The process is 64-bit.
2015-04-24T20:30:52.624-06:00| modconfig| I120: Host codepage=UTF-8 encoding=UTF-8
2015-04-24T20:30:52.624-06:00| modconfig| I120: Host is unknown
2015-04-24T20:30:52.624-06:00| modconfig| I120: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2015-04-24T20:30:52.624-06:00| modconfig| I120: Msg_Reset:
2015-04-24T20:30:52.624-06:00| modconfig| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2015-04-24T20:30:52.624-06:00| modconfig| I120: ----------------------------------------
2015-04-24T20:30:52.624-06:00| modconfig| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-04-24T20:30:52.624-06:00| modconfig| I120: DictionaryLoad: Cannot open file "/root/.vmware/config": No such file or directory.
2015-04-24T20:30:52.624-06:00| modconfig| I120: Msg_Reset:
2015-04-24T20:30:52.624-06:00| modconfig| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2015-04-24T20:30:52.624-06:00| modconfig| I120: ----------------------------------------
2015-04-24T20:30:52.624-06:00| modconfig| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2015-04-24T20:30:52.627-06:00| modconfig| W110: HostinfoReadDistroFile: Cannot work with empty file.
2015-04-24T20:30:52.627-06:00| modconfig| W110: HostinfoOSData: Error: no distro file found
2015-04-24T20:30:52.627-06:00| modconfig| I120: Initialized! Lets do this thing...
2015-04-24T20:30:52.627-06:00| modconfig| I120: Obtaining info using the running kernel.
2015-04-24T20:30:52.627-06:00| modconfig| I120: Created new pathsHash.
2015-04-24T20:30:52.627-06:00| modconfig| I120: Setting header path for 3.19.3-3-ARCH to "/lib/modules/3.19.3-3-ARCH/build/include".
2015-04-24T20:30:52.627-06:00| modconfig| I120: Validating path "/lib/modules/3.19.3-3-ARCH/build/include" for kernel release "3.19.3-3-ARCH".
2015-04-24T20:30:52.627-06:00| modconfig| I120: using /sbin/gcc for preprocess check
2015-04-24T20:30:52.632-06:00| modconfig| I120: Preprocessed UTS_RELEASE, got value "3.19.3-3-ARCH".
2015-04-24T20:30:52.632-06:00| modconfig| I120: The header path "/lib/modules/3.19.3-3-ARCH/build/include" for the kernel "3.19.3-3-ARCH" is valid. Whoohoo!
2015-04-24T20:30:52.685-06:00| modconfig| I120: found symbol version file /lib/modules/3.19.3-3-ARCH/build/Module.symvers
2015-04-24T20:30:52.685-06:00| modconfig| I120: Reading symbol versions from /lib/modules/3.19.3-3-ARCH/build/Module.symvers.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Read 17243 symbol versions
2015-04-24T20:30:52.699-06:00| modconfig| I120: Reading in info for the vmmon module.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Reading in info for the vmnet module.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Reading in info for the vmblock module.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Reading in info for the vmci module.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Reading in info for the vsock module.
2015-04-24T20:30:52.699-06:00| modconfig| I120: Setting vsock to depend on vmci.
2015-04-24T20:30:52.709-06:00| modconfig| I120: Trying to find a suitable PBM set for kernel "3.19.3-3-ARCH".
2015-04-24T20:30:52.709-06:00| modconfig| I120: No matching PBM set was found for kernel "3.19.3-3-ARCH".
2015-04-24T20:30:52.709-06:00| modconfig| I120: Found compiler at "/sbin/gcc"
2015-04-24T20:30:52.711-06:00| modconfig| I120: Got gcc version "4.9.2".
2015-04-24T20:30:52.711-06:00| modconfig| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-04-24T20:30:52.711-06:00| modconfig| I120: Using temp dir "/tmp".
2015-04-24T20:30:52.822-06:00| modconfig| I120: Setting destination path for vmmon to "/lib/modules/3.19.3-3-ARCH/misc/vmmon.ko".
2015-04-24T20:30:52.822-06:00| modconfig| I120: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar".
2015-04-24T20:30:52.824-06:00| modconfig| I120: Successfully extracted the vmmon source.
2015-04-24T20:30:52.824-06:00| modconfig| I120: Building module with command "/sbin/make -j12 -C /tmp/modconfig-niMq8X/vmmon-only auto-build HEADER_DIR=/lib/modules/3.19.3-3-ARCH/build/include CC=/sbin/gcc IS_GCC_3=no"
2015-04-24T20:30:54.153-06:00| modconfig| I120: Successfully built vmmon. Module is currently at "/tmp/modconfig-niMq8X/vmmon.o".
2015-04-24T20:30:54.153-06:00| modconfig| I120: Found the vmmon symvers file at "/tmp/modconfig-niMq8X/vmmon-only/Module.symvers".
2015-04-24T20:30:54.153-06:00| modconfig| I120: Installing vmmon from /tmp/modconfig-niMq8X/vmmon.o to /lib/modules/3.19.3-3-ARCH/misc/vmmon.ko.
2015-04-24T20:30:54.154-06:00| modconfig| I120: Registering file "/lib/modules/3.19.3-3-ARCH/misc/vmmon.ko".
2015-04-24T20:30:54.388-06:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-04-24T20:30:54.388-06:00| modconfig| I120: Registering file "/usr/lib/vmware/symvers/vmmon-3.19.3-3-ARCH".
2015-04-24T20:30:54.589-06:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-04-24T20:30:54.589-06:00| modconfig| I120: Setting destination path for vmnet to "/lib/modules/3.19.3-3-ARCH/misc/vmnet.ko".
2015-04-24T20:30:54.589-06:00| modconfig| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-04-24T20:30:54.590-06:00| modconfig| I120: Successfully extracted the vmnet source.
2015-04-24T20:30:54.590-06:00| modconfig| I120: Building module with command "/sbin/make -j12 -C /tmp/modconfig-niMq8X/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.3-3-ARCH/build/include CC=/sbin/gcc IS_GCC_3=no"
2015-04-24T20:30:55.745-06:00| modconfig| W110: Failed to build vmnet. Failed to execute the build command.
2015-04-24T20:30:55.748-06:00| modconfig| I120: We are now shutdown. Ready to die!

Anyone have an idea what is going on here?

ashbreeze · 2015-04-27 13:43:29

I'm having virtually the same problem:

root@velo:~# ./build-vmware-modules.sh 
 vmware-unpatch
+ vmware-unpatch
==> Reverting VMware Workstation v11.1.0 module sources..
  -> Removing /usr/lib/vmware/modules/source/
  -> Renaming backup: /usr/lib/vmware/modules/source-11.1.0/ -> /usr/lib/vmware/modules/source/
    -> Done.
 vmware-patch -f -v
+ vmware-patch -f -v
==> Patching VMware Workstation v11.1.0 for kernel 3.19.3-3-ARCH..
  -> Backing up..
  -> [vmnet]
    -> Extracting archives..
    -> Patching..
patching file vmnet-only/driver.c
patching file vmnet-only/userif.c
    -> Recreating archives..
==> Installing modules..
Stopping VMware services:
   VMware Authentication Daemon                                        done
   VM communication interface socket family                            done
   Virtual machine communication interface                             done
   Virtual machine monitor                                             done
   Blocking file system                                                done
Starting VMware services:
   Virtual machine monitor                                             done
   Virtual machine communication interface                             done
   VM communication interface socket family                            done
   Blocking file system                                                done
   Virtual ethernet                                                   failed
   VMware Authentication Daemon                                        done
Unable to start services
  -> Done.

Updating gtkmm3 (3.10.0-1 -> 3.16.0-1 seems to have fixed this problem.

Last edited by ashbreeze (2015-04-28 14:27:04)

Arch Linux

#1 2015-04-25 02:44:03

vmware 11.1 kernel 3.19 Failed to build vmnet

#2 2015-04-27 13:43:29

Re: vmware 11.1 kernel 3.19 Failed to build vmnet

Board footer