Splashy-full won't compile

joseribeiro · 2015-04-28 18:55:48

I can't install splashy-full:

[jribeiro@arkosta tmp]$ yaourt -S splashy-full

==> Downloading splashy-full PKGBUILD from AUR...
x .AURINFO
x splash-initscripts
x splashy-functions
x PKGBUILD
x splashy-full.install
x initcpio_hook
x splash.conf
x automake.patch
x initcpio_install
x configure.ac.patch
Comment by ZHoob2004  (2013-10-02 19:04)
As a quick fix to the automake issue, I just installed automake1.10 from the aur and ran alias automake=automake1.10 before doing makepkg and it built with no issues. automake1.10 doesn't replace automake, so it could be configured as a dependency and the command changed in the PKGBUILD as a solution to this update headache.

But then it had trouble with directfb 1.7 vs 1.6 when I tried to run mkinitcpio, so I'm going to be trying to use plymouth instead since it's working fine so far.

Comment by davidrapan  (2014-01-07 00:44)
Hi guys!

Please can someone look at my error while compiling ?

Thread: https://bbs.archlinux.org/viewtopic.php?pid=1367882#p1367882

Problem:
[code]
== Extracting sources...
== Starting build()...
- Cloning initial copy of splashy...
Cloning into 'splashy'...
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
== ERROR: A failure occurred in build().
Aborting...
[/code]

Comment by carstene1ns  (2014-01-11 11:04)
I have fixed the PKGBUILD so it compiles again, however please note that splashy requires SysV-Init and is not systemd-ready. It will likely not work!
https://gist.github.com/carstene1ns/c968774bb64ce4ac26d6

Comment by kaede  (2014-02-17 11:42)
Same like davidrapan.

Cloning into 'splashy'...
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

Comment by carstene1ns  (2014-03-21 01:11)
As said the source url is wrong. Try my uploaded PKGBUILD instead.
(Or better: do not use splashy at all, it is not systemd-ready!)

splashy-full c2c9cc2-1  (Sex Jul  3 18:05:53 WEST 2009)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n

==> splashy-full dependencies:
 - mkinitcpio (already installed)
 - sysfsutils (already installed)
 - glib2 (already installed)
 - directfb (already installed)
 - git (already installed)


==> Edit splashy-full.install ? [Y/n] ("A" to abort)
==> ------------------------------------------------
==> n

==> Continue building splashy-full ? [Y/n]
==> --------------------------------------
==> 
==> Building and installing package
==> A criar o pacote: splashy-full c2c9cc2-1 (Ter Abr 28 19:54:09 WEST 2015)
==> A verfificar as dependências para executar a aplicação...
==> A verificar as dependências para construir a aplicação...
==> A obter as fontes ...
  -> A clonar splashy do repositório git ...
Clonando em um repositorio nu (bare) '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/splashy'...
Checking connectivity... terminado.
  -> Encontrado splash.conf
  -> Encontrado splash-initscripts
  -> Encontrado splashy-functions
  -> Encontrado initcpio_hook
  -> Encontrado initcpio_install
  -> Encontrado automake.patch
  -> Encontrado configure.ac.patch
==> A validar ficheiros fonte com sha512sums...
    splashy ... Saltado
    splash.conf ... Passou
    splash-initscripts ... Passou
    splashy-functions ... Passou
    initcpio_hook ... Passou
    initcpio_install ... Passou
    automake.patch ... Passou
    configure.ac.patch ... Passou
==> A extrair as fontes...
  -> A criar uma cópia de trabalho splashy do repositório git ...
Clonar em 'splashy'...
terminado.
==> A iniciar pkgver()...
==> A iniciar build()...
patching file ./autogen.sh
patching file ./configure.ac
checking for autoconf >= 2.59...
  testing autoconf2.50... not found.
  testing autoconf... found 2.69
checking for automake >= 1.9...
  testing automake-1.9... not found.
  testing automake-1.10... not found.
  testing automake-1.14... found 1.15
checking for libtool >= 1.5...
  testing libtoolize... found 2.4.6
checking for glib-gettext >= 2.2.0...
  testing glib-gettextize... found 2.44.0
checking for pkg-config >= 0.14.0...
  testing pkg-config... found 0.28
Checking for required M4 macros...
Checking for forbidden M4 macros...
Processing ./configure.ac
Running libtoolize...
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
Running glib-gettextize... Ignore non-fatal messages.
Copying file po/Makefile.in.in

Please add the files
  codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
  progtest.m4
from the /usr/share/aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.

Running aclocal-1.14...
Running autoconf...
Running autoheader...
Running automake-1.14...
configure.ac:7: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.ac:7: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
configure.ac:11: installing './compile'
configure.ac:17: installing './config.guess'
configure.ac:17: installing './config.sub'
configure.ac:7: installing './install-sh'
configure.ac:7: installing './missing'
Makefile.am: installing './INSTALL'
doc/Makefile.am:11: warning: '%'-style pattern rules are a GNU make extension
doc/Makefile.am:14: warning: '%'-style pattern rules are a GNU make extension
src/Makefile.am:14: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
src/Makefile.am: installing './depcomp'
Running ./configure --enable-maintainer-mode --prefix=/usr --libdir=/usr/lib --sysconfdir=/etc --sbindir=/sbin --datarootdir=/usr/share --mandir=/usr/share/man --includedir=/usr/include ...
configure: WARNING: unrecognized options: --enable-maintainer-mode
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether ln -s works... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed...  es sk fr de hu pt
checking magic.h usability... yes
checking magic.h presence... yes
checking for magic.h... yes
checking for magic_open in -lmagic... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for splashy... yes
checking for splashy_config... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating po/Makefile.in
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/xml_format.h
config.status: creating doc/Makefile
config.status: creating doc/config.xml
config.status: creating doc/theme.xml
config.status: creating scripts/Makefile
config.status: creating scripts/initramfs-tools/hooks/libsplashy
config.status: creating Doxyfile
config.status: creating splashy.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
configure: WARNING: unrecognized options: --enable-maintainer-mode

splashy 0.3.14

Print debugging messages...... :

configure complete, now type 'make'

Now type `make' to compile Package
make  all-recursive
make[1]: Entering directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy'
Making all in po
make[2]: Entering directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/po'
file=./`echo es | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file es.po
/usr/bin/msgfmt: es.po: warning: PO file header fuzzy
                        warning: older versions of msgfmt will give an error on this
es.po:8: warning: header field 'Language' missing in header
file=./`echo sk | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file sk.po
/usr/bin/msgfmt: sk.po: warning: PO file header fuzzy
                        warning: older versions of msgfmt will give an error on this
sk.po:8: warning: header field 'Language' missing in header
file=./`echo fr | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file fr.po
fr.po:7: warning: header field 'Language' missing in header
file=./`echo de | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file de.po
/usr/bin/msgfmt: de.po: warning: PO file header fuzzy
                        warning: older versions of msgfmt will give an error on this
de.po:9: warning: header field 'Language' missing in header
file=./`echo hu | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file hu.po
/usr/bin/msgfmt: hu.po: warning: PO file header fuzzy
                        warning: older versions of msgfmt will give an error on this
hu.po:8: warning: header field 'Language' missing in header
file=./`echo pt | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -c -o $file pt.po
/usr/bin/msgfmt: pt.po: warning: PO file header fuzzy
                        warning: older versions of msgfmt will give an error on this
pt.po:8: warning: header field 'Language' missing in header
make[2]: Leaving directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/po'
Making all in doc
make[2]: Entering directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/doc'
pod2man --section 1 --center "Splashy POSIX boot splash system" --date `date +%Y-%m-%d` splashy.pod > splashy.1 
pod2man --section 1 --center "Splashy POSIX boot splash system" --date `date +%Y-%m-%d` splashy_config.pod > splashy_config.1 
pod2man --section 1 --center "Splashy POSIX boot splash system" --date `date +%Y-%m-%d` splashy_update.pod > splashy_update.1 
pod2man --section 5 --center "Splashy POSIX boot splash system" --date `date +%Y-%m-%d` splashy-config.xml.pod > splashy-config.xml.5 
pod2man --section 5 --center "Splashy POSIX boot splash system" --date `date +%Y-%m-%d` splashy-theme.xml.pod > splashy-theme.xml.5 
make[2]: Leaving directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/doc'
Making all in src
make[2]: Entering directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/src'
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..  -D_REENTRANT -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/directfb   -D_FORTIFY_SOURCE=2  -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -Werror -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -MT xml_config.lo -MD -MP -MF .deps/xml_config.Tpo -c -o xml_config.lo xml_config.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -D_REENTRANT -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/directfb -D_FORTIFY_SOURCE=2 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -Werror -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -MT xml_config.lo -MD -MP -MF .deps/xml_config.Tpo -c xml_config.c  -fPIC -DPIC -o .libs/xml_config.o
mv -f .deps/xml_config.Tpo .deps/xml_config.Plo
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..  -D_REENTRANT -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/directfb   -D_FORTIFY_SOURCE=2  -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -Werror -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -MT xml_parser.lo -MD -MP -MF .deps/xml_parser.Tpo -c -o xml_parser.lo xml_parser.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -D_REENTRANT -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/directfb -D_FORTIFY_SOURCE=2 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -Werror -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -MT xml_parser.lo -MD -MP -MF .deps/xml_parser.Tpo -c xml_parser.c  -fPIC -DPIC -o .libs/xml_parser.o
xml_parser.c: In function ‘xml_parser_xpath_pop’:
xml_parser.c:94:25: error: variable ‘_last’ set but not used [-Werror=unused-but-set-variable]
         xml_tag_text_t *_last = NULL;
                         ^
xml_parser.c: In function ‘xml_parser_stack_pop’:
xml_parser.c:109:21: error: variable ‘_last’ set but not used [-Werror=unused-but-set-variable]
         xml_node_t *_last = NULL;
                     ^
cc1: all warnings being treated as errors
Makefile:611: recipe for target 'xml_parser.lo' failed
make[2]: *** [xml_parser.lo] Error 1
make[2]: Leaving directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy/src'
Makefile:528: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/tmp/yaourt-tmp-jribeiro/aur-splashy-full/src/splashy'
Makefile:409: recipe for target 'all' failed
make: *** [all] Error 2
==> ERRO: Uma falha ocorreu em build().
    A cancelar...
==> ERROR: Makepkg was unable to build splashy-full.
==> Restart building splashy-full ? [y/N]
==> -------------------------------------
==>

Anyone knows how to fix this?

runical · 2015-04-28 20:13:55

Did you try:

Building using makepkg/in clean chroot?
Leaving a comment on the AUR page?
Searching on the internet?

Also, note that the comments mention that splashy is not systemd ready. Did you take that into account?

Last edited by runical (2015-04-28 20:14:04)

joseribeiro · 2015-04-28 21:41:32

Yes.
Yes.
Yes.

runical · 2015-04-29 10:26:01

Looking into splashy, it seems that the software is not under active development (last release in 2008 [1]) and that the wiki page/forum post is horribly out of date [2,3]. Also, the build seems to require automake 1.9, 1.10 or 1.14, so my attempt ends there. If you really want to use splashy instead of just going with plymouth or just foregoing the bootsplash entirely, you'll have to post whatever you used in your build attempt.

[1] https://alioth.debian.org/projects/splashy/
[2] https://wiki.archlinux.org/index.php/Splashy
[3] https://bbs.archlinux.org/viewtopic.php?id=48978

Arch Linux

#1 2015-04-28 18:55:48

Splashy-full won't compile

#2 2015-04-28 20:13:55

Re: Splashy-full won't compile

#3 2015-04-28 21:41:32

Re: Splashy-full won't compile

#4 2015-04-29 10:26:01

Re: Splashy-full won't compile

Board footer