[Solved]Arch fails to print over CUPS

PhotonX · 2015-05-28 12:59:23

Hello community,

I'm using a Raspi running Raspbian and CUPS 1.5.3 and a Brother HL-2030 printer hanging on the Raspi. Several clients are connected through the local network and should be able to use the printer. The machines are running Xubuntu, Manjaro and Arch. On the Xubuntu and Manjaro machines printing works out of the box (the printer is being discovered and shown in the printing dialogue automatically and then printing works).

On the Arch machine, however, it doesn't work. The printer is also discovered automatically but printing gives these errors in the /var/log/cups/error_log:

On the client there is no output, only this (but the timestamps don't match the time when the print job has been sent):

E [28/May/2015:09:22:15 +0200] Unknown directive BrowseOrder on line 9 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive BrowseAllow on line 10 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive BrowseRemoteProtocols on line 11 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive BrowseAddress on line 12 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive JobPrivateAccess on line 90 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive JobPrivateValues on line 91 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive SubscriptionPrivateAccess on line 93 of /etc/cups/cupsd.conf.
E [28/May/2015:09:22:15 +0200] Unknown directive SubscriptionPrivateValues on line 94 of /etc/cups/cupsd.conf.

On the server (Raspi):

E [28/May/2015:14:33:35 +0200] [Job 176] Job stopped due to filter errors; please consult the error_log file for details.
D [28/May/2015:14:33:35 +0200] [Job 176] The following messages were recorded from 14:33:34 to 14:33:35
D [28/May/2015:14:33:35 +0200] [Job 176] Adding start banner page "none".
D [28/May/2015:14:33:35 +0200] [Job 176] Queued on "Brother_HL-2030_series" by "photon".
D [28/May/2015:14:33:35 +0200] [Job 176] File of type application/vnd.cups-pdf queued by "photon".
D [28/May/2015:14:33:35 +0200] [Job 176] Adding end banner page "none".
D [28/May/2015:14:33:35 +0200] [Job 176] job-sheets=none,none
D [28/May/2015:14:33:35 +0200] [Job 176] argv[0]="Brother_HL-2030_series"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[1]="176"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[2]="photon"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[3]="[T3Übungsblatt5s1](importiert)"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[4]="1"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[5]="EconoMode=off InputSlot=auto job-originating-host-name=192.168.2.100 job-uuid=urn:uuid:a0d99b40-10c0-372e-73fe-6c4a73c618dd MediaType=plain PageSize=Letter Resolution=600x600dpi time-at-creation=1432816414 time-at-processing=1432816415"
D [28/May/2015:14:33:35 +0200] [Job 176] argv[6]="/var/spool/cups/d00176-001"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[8]="HOME=/var/spool/cups/tmp"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[10]="SERVER_ADMIN=root@raspberrypi"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[11]="SOFTWARE=CUPS/1.5.3"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[13]="TZ=Europe/Berlin"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[14]="USER=root"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[17]="IPP_PORT=631"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[18]="CHARSET=utf-8"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[19]="LANG=de_DE.UTF-8"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[20]="PPD=/etc/cups/ppd/Brother_HL-2030_series.ppd"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[21]="RIP_MAX_CACHE=128m"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[23]="DEVICE_URI=usb://Brother/HL-2030%20series?serial=F6J111812"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[24]="PRINTER_INFO=Brother HL-2030 series"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[25]="PRINTER_LOCATION="
D [28/May/2015:14:33:35 +0200] [Job 176] envp[26]="PRINTER=Brother_HL-2030_series"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[27]="PRINTER_STATE_REASONS=none"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[28]="CUPS_FILETYPE=document"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[29]="FINAL_CONTENT_TYPE=printer/Brother_HL-2030_series"
D [28/May/2015:14:33:35 +0200] [Job 176] envp[30]="AUTH_I****"
D [28/May/2015:14:33:35 +0200] [Job 176] Started filter /usr/lib/cups/filter/gziptoany (PID 3371)
D [28/May/2015:14:33:35 +0200] [Job 176] Started filter /usr/lib/cups/filter/foomatic-rip (PID 3372)
D [28/May/2015:14:33:35 +0200] [Job 176] Started backend /usr/lib/cups/backend/usb (PID 3373)
D [28/May/2015:14:33:35 +0200] [Job 176] Getting input from file 
D [28/May/2015:14:33:35 +0200] [Job 176] foomatic-rip version 4.0.17.256 running...
D [28/May/2015:14:33:35 +0200] [Job 176] Parsing PPD file ...
D [28/May/2015:14:33:35 +0200] [Job 176] Added option ColorSpace
D [28/May/2015:14:33:35 +0200] [Job 176] Added option PageSize
D [28/May/2015:14:33:35 +0200] [Job 176] Added option ImageableArea
D [28/May/2015:14:33:35 +0200] [Job 176] Added option PaperDimension
D [28/May/2015:14:33:35 +0200] [Job 176] Added option EconoMode
D [28/May/2015:14:33:35 +0200] [Job 176] Added option InputSlot
D [28/May/2015:14:33:35 +0200] [Job 176] Printing on printer with URI: usb://Brother/HL-2030%20series?serial=F6J111812
D [28/May/2015:14:33:35 +0200] [Job 176] Added option Resolution
D [28/May/2015:14:33:35 +0200] [Job 176] Added option MediaType
D [28/May/2015:14:33:35 +0200] [Job 176] Added option Font
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] Parameter Summary
D [28/May/2015:14:33:35 +0200] [Job 176] -----------------
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] Spooler: cups
D [28/May/2015:14:33:35 +0200] [Job 176] Printer: Brother_HL-2030_series
D [28/May/2015:14:33:35 +0200] [Job 176] Shell: /bin/bash
D [28/May/2015:14:33:35 +0200] [Job 176] PPD file: /etc/cups/ppd/Brother_HL-2030_series.ppd
D [28/May/2015:14:33:35 +0200] [Job 176] ATTR file: 
D [28/May/2015:14:33:35 +0200] [Job 176] Printer model: Brother HL-2030 Foomatic/hl1250 (recommended)
D [28/May/2015:14:33:35 +0200] [Job 176] Job title: T3Übungsblatt5s1importiert
D [28/May/2015:14:33:35 +0200] [Job 176] File(s) to be printed:
D [28/May/2015:14:33:35 +0200] [Job 176] <STDIN>
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [28/May/2015:14:33:35 +0200] [Job 176] Printing system options:
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'job-originating-host-name=192.168.2.100'
D [28/May/2015:14:33:35 +0200] [Job 176] Unknown option job-originating-host-name=192.168.2.100.
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'job-uuid=urn:uuid:a0d99b40-10c0-372e-73fe-6c4a73c618dd'
D [28/May/2015:14:33:35 +0200] [Job 176] Unknown option job-uuid=urn:uuid:a0d99b40-10c0-372e-73fe-6c4a73c618dd.
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'time-at-creation=1432816414'
D [28/May/2015:14:33:35 +0200] [Job 176] Unknown option time-at-creation=1432816414.
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'time-at-processing=1432816415'
D [28/May/2015:14:33:35 +0200] [Job 176] Unknown option time-at-processing=1432816415.
D [28/May/2015:14:33:35 +0200] [Job 176] Options from the PPD file:
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'EconoMode=off'
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'InputSlot=auto'
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'MediaType=plain'
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'PageSize=Letter'
D [28/May/2015:14:33:35 +0200] [Job 176] Pondering option 'Resolution=600x600dpi'
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] ================================================
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] File: <STDIN>
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] ================================================
D [28/May/2015:14:33:35 +0200] [Job 176] 
D [28/May/2015:14:33:35 +0200] [Job 176] Cannot process "<STDIN>": Unknown filetype.
D [28/May/2015:14:33:35 +0200] [Job 176] Process is dying with "Could not print file <STDIN>
D [28/May/2015:14:33:35 +0200] [Job 176] ", exit stat 2
D [28/May/2015:14:33:35 +0200] [Job 176] Cleaning up...
D [28/May/2015:14:33:35 +0200] [Job 176] libusb_get_device_list=5
D [28/May/2015:14:33:35 +0200] [Job 176] STATE: +connecting-to-device
D [28/May/2015:14:33:35 +0200] [Job 176] STATE: -connecting-to-device
D [28/May/2015:14:33:35 +0200] [Job 176] Printer found with device ID: MFG:Brother;CMD:PJL,HBP;MDL:HL-2030 series;CLS:PRINTER; Device URI: usb://Brother/HL-2030%20series?serial=F6J111812
D [28/May/2015:14:33:35 +0200] [Job 176] Device protocol: 2
D [28/May/2015:14:33:35 +0200] [Job 176] Sending data to printer.
D [28/May/2015:14:33:35 +0200] [Job 176] Sent 0 bytes...
D [28/May/2015:14:33:35 +0200] [Job 176] Waiting for read thread to exit...
D [28/May/2015:14:33:35 +0200] [Job 176] End of messages
D [28/May/2015:14:33:35 +0200] [Job 176] printer-state=3(idle)
D [28/May/2015:14:33:35 +0200] [Job 176] printer-state-message="Sending data to printer."
D [28/May/2015:14:33:35 +0200] [Job 176] printer-state-reasons=none
E [28/May/2015:14:38:36 +0200] [Job 176] Stopping unresponsive job!

If I add the printer manually using the "raw" driver (which helped earlier: https://bbs.archlinux.org/viewtopic.php?id=193650), I get following error_log:

On the client:

E [28/May/2015:14:45:08 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [28/May/2015:14:45:20 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [28/May/2015:14:45:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

On the server: nothing.

Any hints how to track down the problem?

Thanks,
Photon

edit: Solved by reinstalling Raspbian on the Raspi.

Last edited by PhotonX (2017-04-11 16:59:06)

Arch Linux

#1 2015-05-28 12:59:23

[Solved]Arch fails to print over CUPS

Board footer