You are not logged in.
- Topics: Active | Unanswered
#1 2015-06-03 21:33:38
- shizi
- Member
- Registered: 2015-06-02
- Posts: 6
Strange problem when logging out of Openbox
Hello,
I recently installed Arch and everything seems to work, I can log in through "startx" into openbox without any problems, but when I log out from openbox I instantly get a lot of flickering. Sometimes it stops though and I made a picture of the error messages (I hope they're legible enough):
The Xorg.0.log reads as follows:
[ 6.234]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 6.234] X Protocol Version 11, Revision 0
[ 6.234] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[ 6.234] Current Operating System: Linux shishi 4.0.4-2-ARCH #1 SMP PREEMPT Fri May 22 03:05:23 UTC 2015 x86_64
[ 6.234] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 6.234] Build Date: 14 April 2015 10:34:18AM
[ 6.234]
[ 6.234] Current version of pixman: 0.32.6
[ 6.234] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 6.234] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.234] (==) Log file: "/home/shizi/.local/share/xorg/Xorg.0.log", Time: Tue Jun 2 09:13:42 2015
[ 6.236] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.236] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.237] (==) No Layout section. Using the first Screen section.
[ 6.237] (==) No screen section available. Using defaults.
[ 6.237] (**) |-->Screen "Default Screen Section" (0)
[ 6.237] (**) | |-->Monitor "<default monitor>"
[ 6.237] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.237] (==) Automatically adding devices
[ 6.237] (==) Automatically enabling devices
[ 6.237] (==) Automatically adding GPU devices
[ 6.239] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.239] Entry deleted from font path.
[ 6.239] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.239] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.239] Entry deleted from font path.
[ 6.239] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.239] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 6.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.239] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.239] (II) Loader magic: 0x815d80
[ 6.239] (II) Module ABI versions:
[ 6.239] X.Org ANSI C Emulation: 0.4
[ 6.239] X.Org Video Driver: 19.0
[ 6.239] X.Org XInput driver : 21.0
[ 6.239] X.Org Server Extension : 9.0
[ 6.241] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 6.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.242] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 6.243] (--) PCI:*(0:0:2:0) 8086:1616:1025:0940 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 6.243] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.244] (II) LoadModule: "glx"
[ 6.245] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.252] (II) Module glx: vendor="X.Org Foundation"
[ 6.252] compiled for 1.17.1, module version = 1.0.0
[ 6.252] ABI class: X.Org Server Extension, version 9.0
[ 6.252] (==) AIGLX enabled
[ 6.252] (==) Matched intel as autoconfigured driver 0
[ 6.252] (==) Matched intel as autoconfigured driver 1
[ 6.252] (==) Matched modesetting as autoconfigured driver 2
[ 6.252] (==) Matched fbdev as autoconfigured driver 3
[ 6.252] (==) Matched vesa as autoconfigured driver 4
[ 6.252] (==) Assigned the driver to the xf86ConfigLayout
[ 6.252] (II) LoadModule: "intel"
[ 6.252] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.254] (II) Module intel: vendor="X.Org Foundation"
[ 6.254] compiled for 1.17.1, module version = 2.99.917
[ 6.254] Module class: X.Org Video Driver
[ 6.254] ABI class: X.Org Video Driver, version 19.0
[ 6.254] (II) LoadModule: "modesetting"
[ 6.254] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6.255] (II) Module modesetting: vendor="X.Org Foundation"
[ 6.255] compiled for 1.17.1, module version = 1.17.1
[ 6.255] Module class: X.Org Video Driver
[ 6.255] ABI class: X.Org Video Driver, version 19.0
[ 6.255] (II) LoadModule: "fbdev"
[ 6.255] (WW) Warning, couldn't open module fbdev
[ 6.255] (II) UnloadModule: "fbdev"
[ 6.255] (II) Unloading fbdev
[ 6.255] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 6.255] (II) LoadModule: "vesa"
[ 6.255] (WW) Warning, couldn't open module vesa
[ 6.255] (II) UnloadModule: "vesa"
[ 6.255] (II) Unloading vesa
[ 6.255] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 6.255] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 6.256] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 6.256] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 6.256] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 6.256] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6.256] (++) using VT number 1
[ 6.256] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 6.256] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 6.256] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150130
[ 6.257] (WW) Falling back to old probe method for modesetting
[ 6.258] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 6.259] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD graphics 5500
[ 6.259] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 6.259] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.259] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.259] (==) intel(0): RGB weight 888
[ 6.259] (==) intel(0): Default visual is TrueColor
[ 6.259] (II) intel(0): Output eDP1 has no monitor section
[ 6.260] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 6.260] (II) intel(0): Enabled output eDP1
[ 6.260] (II) intel(0): Output DP1 has no monitor section
[ 6.260] (II) intel(0): Enabled output DP1
[ 6.260] (II) intel(0): Output HDMI1 has no monitor section
[ 6.260] (II) intel(0): Enabled output HDMI1
[ 6.260] (II) intel(0): Output HDMI2 has no monitor section
[ 6.260] (II) intel(0): Enabled output HDMI2
[ 6.260] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 6.260] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 6.260] (II) intel(0): Enabled output VIRTUAL1
[ 6.260] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 6.260] (==) intel(0): TearFree disabled
[ 6.260] (==) intel(0): DPI set to (96, 96)
[ 6.260] (II) Loading sub module "dri2"
[ 6.260] (II) LoadModule: "dri2"
[ 6.260] (II) Module "dri2" already built-in
[ 6.260] (II) Loading sub module "present"
[ 6.260] (II) LoadModule: "present"
[ 6.260] (II) Module "present" already built-in
[ 6.260] (II) UnloadModule: "modesetting"
[ 6.260] (II) Unloading modesetting
[ 6.261] (==) Depth 24 pixmap format is 32 bpp
[ 6.262] (II) intel(0): SNA initialized with Broadwell backend
[ 6.262] (==) intel(0): Backing store enabled
[ 6.262] (==) intel(0): Silken mouse enabled
[ 6.263] (II) intel(0): HW Cursor enabled
[ 6.263] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.263] (==) intel(0): DPMS enabled
[ 6.263] (==) intel(0): display hotplug detection enabled
[ 6.263] (II) intel(0): [DRI2] Setup complete
[ 6.263] (II) intel(0): [DRI2] DRI driver: i965
[ 6.263] (II) intel(0): [DRI2] VDPAU driver: i965
[ 6.263] (II) intel(0): direct rendering: DRI2 enabled
[ 6.263] (II) intel(0): hardware support for Present enabled
[ 6.263] (--) RandR disabled
[ 6.302] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.302] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.302] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.302] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.302] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.302] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.302] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6.302] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6.302] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.302] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 6.303] (II) AIGLX: Loaded and initialized i965
[ 6.303] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.305] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 6.316] (II) intel(0): Setting screen physical size to 361 x 203
[ 6.355] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 6.355] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.355] (**) Power Button: Applying InputClass "system-keyboard"
[ 6.355] (**) Power Button: Applying InputClass "keyboard"
[ 6.355] (II) LoadModule: "evdev"
[ 6.355] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.357] (II) Module evdev: vendor="X.Org Foundation"
[ 6.357] compiled for 1.17.1, module version = 2.9.2
[ 6.357] Module class: X.Org XInput Driver
[ 6.357] ABI class: X.Org XInput driver, version 21.0
[ 6.357] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 12 paused 0
[ 6.357] (II) Using input driver 'evdev' for 'Power Button'
[ 6.357] (**) Power Button: always reports core events
[ 6.357] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 6.357] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.357] (--) evdev: Power Button: Found keys
[ 6.357] (II) evdev: Power Button: Configuring as keyboard
[ 6.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 6.357] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.357] (**) Option "xkb_rules" "evdev"
[ 6.357] (**) Option "xkb_model" "pc104"
[ 6.357] (**) Option "xkb_layout" "de"
[ 6.357] (WW) Option "xkb_variant" requires a string value
[ 6.376] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 6.376] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.376] (**) Video Bus: Applying InputClass "system-keyboard"
[ 6.376] (**) Video Bus: Applying InputClass "keyboard"
[ 6.377] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 13 paused 0
[ 6.377] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.377] (**) Video Bus: always reports core events
[ 6.377] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 6.377] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.377] (--) evdev: Video Bus: Found keys
[ 6.377] (II) evdev: Video Bus: Configuring as keyboard
[ 6.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 6.377] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.377] (**) Option "xkb_rules" "evdev"
[ 6.377] (**) Option "xkb_model" "pc104"
[ 6.377] (**) Option "xkb_layout" "de"
[ 6.377] (WW) Option "xkb_variant" requires a string value
[ 6.377] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 6.377] (II) No input driver specified, ignoring this device.
[ 6.377] (II) This device may have been added with another device file.
[ 6.377] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 6.377] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6.377] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 6.377] (**) Sleep Button: Applying InputClass "keyboard"
[ 6.378] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 14 paused 0
[ 6.378] (II) Using input driver 'evdev' for 'Sleep Button'
[ 6.378] (**) Sleep Button: always reports core events
[ 6.378] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 6.378] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 6.378] (--) evdev: Sleep Button: Found keys
[ 6.378] (II) evdev: Sleep Button: Configuring as keyboard
[ 6.378] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event5"
[ 6.378] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 6.378] (**) Option "xkb_rules" "evdev"
[ 6.378] (**) Option "xkb_model" "pc104"
[ 6.378] (**) Option "xkb_layout" "de"
[ 6.378] (WW) Option "xkb_variant" requires a string value
[ 6.378] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 6.378] (II) No input driver specified, ignoring this device.
[ 6.378] (II) This device may have been added with another device file.
[ 6.379] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 6.379] (II) No input driver specified, ignoring this device.
[ 6.379] (II) This device may have been added with another device file.
[ 6.379] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 6.379] (II) No input driver specified, ignoring this device.
[ 6.379] (II) This device may have been added with another device file.
[ 6.379] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 6.379] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.379] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 6.379] (**) Logitech USB Keyboard: Applying InputClass "keyboard"
[ 6.379] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0
[ 6.379] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 6.379] (**) Logitech USB Keyboard: always reports core events
[ 6.379] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 6.379] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc328
[ 6.379] (--) evdev: Logitech USB Keyboard: Found keys
[ 6.379] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 6.379] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C328.0001/input/input1/event1"
[ 6.379] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 6.379] (**) Option "xkb_rules" "evdev"
[ 6.380] (**) Option "xkb_model" "pc104"
[ 6.380] (**) Option "xkb_layout" "de"
[ 6.380] (WW) Option "xkb_variant" requires a string value
[ 6.380] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 6.380] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.380] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 6.380] (**) Logitech USB Keyboard: Applying InputClass "keyboard"
[ 6.380] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 6.380] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 6.380] (**) Logitech USB Keyboard: always reports core events
[ 6.380] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 6.380] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc328
[ 6.380] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 6.380] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 6.380] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 6.380] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 6.380] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 6.380] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 6.380] (--) evdev: Logitech USB Keyboard: Found keys
[ 6.380] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 6.380] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 6.380] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 6.380] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 6.380] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.381] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C328.0002/input/input2/event2"
[ 6.381] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 6.381] (**) Option "xkb_rules" "evdev"
[ 6.381] (**) Option "xkb_model" "pc104"
[ 6.381] (**) Option "xkb_layout" "de"
[ 6.381] (WW) Option "xkb_variant" requires a string value
[ 6.381] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 6.381] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 6.381] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 6.381] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 6.381] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 6.381] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 6.381] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event3)
[ 6.381] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 6.433] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[ 6.433] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 6.433] (**) Logitech USB Laser Mouse: always reports core events
[ 6.433] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event3"
[ 6.433] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc06d
[ 6.433] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[ 6.433] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[ 6.433] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[ 6.433] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[ 6.433] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[ 6.433] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[ 6.433] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 6.433] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C06D.0003/input/input3/event3"
[ 6.433] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 11)
[ 6.433] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[ 6.433] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 6.433] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 6.433] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 6.433] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 6.434] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 6.434] (II) No input driver specified, ignoring this device.
[ 6.434] (II) This device may have been added with another device file.
[ 6.434] (II) config/udev: Adding input device HD WebCam (/dev/input/event16)
[ 6.434] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 6.434] (**) HD WebCam: Applying InputClass "system-keyboard"
[ 6.434] (**) HD WebCam: Applying InputClass "keyboard"
[ 6.434] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 18 paused 0
[ 6.434] (II) Using input driver 'evdev' for 'HD WebCam'
[ 6.434] (**) HD WebCam: always reports core events
[ 6.434] (**) evdev: HD WebCam: Device: "/dev/input/event16"
[ 6.434] (--) evdev: HD WebCam: Vendor 0x4f2 Product 0xb455
[ 6.434] (--) evdev: HD WebCam: Found keys
[ 6.434] (II) evdev: HD WebCam: Configuring as keyboard
[ 6.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16/event16"
[ 6.434] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 12)
[ 6.434] (**) Option "xkb_rules" "evdev"
[ 6.434] (**) Option "xkb_model" "pc104"
[ 6.434] (**) Option "xkb_layout" "de"
[ 6.434] (WW) Option "xkb_variant" requires a string value
[ 6.435] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 6.435] (II) No input driver specified, ignoring this device.
[ 6.435] (II) This device may have been added with another device file.
[ 6.435] (II) config/udev: Adding input device ELAN0501:00 04F3:300B UNKNOWN (/dev/input/event11)
[ 6.435] (**) ELAN0501:00 04F3:300B UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 6.435] (**) ELAN0501:00 04F3:300B UNKNOWN: Applying InputClass "touchpad catchall"
[ 6.435] (**) ELAN0501:00 04F3:300B UNKNOWN: Applying InputClass "Default clickpad buttons"
[ 6.435] (II) LoadModule: "synaptics"
[ 6.435] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6.436] (II) Module synaptics: vendor="X.Org Foundation"
[ 6.436] compiled for 1.17.1, module version = 1.8.2
[ 6.436] Module class: X.Org XInput Driver
[ 6.436] ABI class: X.Org XInput driver, version 21.0
[ 6.438] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 6.438] (II) Using input driver 'synaptics' for 'ELAN0501:00 04F3:300B UNKNOWN'
[ 6.438] (**) ELAN0501:00 04F3:300B UNKNOWN: always reports core events
[ 6.438] (**) Option "Device" "/dev/input/event11"
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: x-axis range 0 - 3239 (res 31)
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: y-axis range 0 - 2347 (res 32)
[ 6.490] (II) synaptics: ELAN0501:00 04F3:300B UNKNOWN: device does not report pressure, will use touch data.
[ 6.490] (II) synaptics: ELAN0501:00 04F3:300B UNKNOWN: device does not report finger width.
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: buttons: left double triple
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: Vendor 0x4f3 Product 0x300b
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: invalid pressure range. defaulting to 0 - 255
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: invalid finger width range. defaulting to 0 - 15
[ 6.490] (**) Option "TapButton1" "1"
[ 6.490] (**) Option "TapButton2" "2"
[ 6.490] (**) Option "TapButton3" "3"
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: touchpad found
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: always reports core events
[ 6.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3433:00/i2c-1/i2c-ELAN0501:00/0018:04F3:300B.0004/input/input11/event11"
[ 6.490] (II) XINPUT: Adding extended input device "ELAN0501:00 04F3:300B UNKNOWN" (type: TOUCHPAD, id 13)
[ 6.490] (**) synaptics: ELAN0501:00 04F3:300B UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
[ 6.490] (**) synaptics: ELAN0501:00 04F3:300B UNKNOWN: (accel) MaxSpeed is now 1.75
[ 6.490] (**) synaptics: ELAN0501:00 04F3:300B UNKNOWN: (accel) AccelFactor is now 0.050
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: (accel) keeping acceleration scheme 1
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: (accel) acceleration profile 1
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: (accel) acceleration factor: 2.000
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: (accel) acceleration threshold: 4
[ 6.490] (--) synaptics: ELAN0501:00 04F3:300B UNKNOWN: touchpad found
[ 6.490] (II) config/udev: Adding input device ELAN0501:00 04F3:300B UNKNOWN (/dev/input/mouse1)
[ 6.490] (**) ELAN0501:00 04F3:300B UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
[ 6.491] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.491] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.491] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 6.491] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 6.491] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[ 6.491] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.491] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.491] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.491] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.491] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.491] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.491] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 6.491] (**) Option "xkb_rules" "evdev"
[ 6.491] (**) Option "xkb_model" "pc104"
[ 6.491] (**) Option "xkb_layout" "de"
[ 6.491] (WW) Option "xkb_variant" requires a string value
[ 6.491] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 6.491] (II) No input driver specified, ignoring this device.
[ 6.491] (II) This device may have been added with another device file.
[ 6.492] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)
[ 6.492] (II) No input driver specified, ignoring this device.
[ 6.492] (II) This device may have been added with another device file.
[ 6.492] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 6.492] (II) No input driver specified, ignoring this device.
[ 6.492] (II) This device may have been added with another device file.
[ 6.492] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9)
[ 6.492] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 6.492] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 6.492] (**) Acer WMI hotkeys: Applying InputClass "keyboard"
[ 6.492] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 21 paused 0
[ 6.492] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 6.492] (**) Acer WMI hotkeys: always reports core events
[ 6.492] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event9"
[ 6.492] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 6.492] (--) evdev: Acer WMI hotkeys: Found keys
[ 6.492] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 6.492] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 6.492] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 6.492] (**) Option "xkb_rules" "evdev"
[ 6.492] (**) Option "xkb_model" "pc104"
[ 6.492] (**) Option "xkb_layout" "de"
[ 6.492] (WW) Option "xkb_variant" requires a string valueSorry, I don't know what other log I should provide at this stage... I have an Intel HD Graphics 5500 and I'm using the xf86-intel-graphics driver. Actually I could just ignore the problem since I can log into openbox just fine - but anyway, I don't like the flickering and those error messages at all. Though the console is still responsive when it happens and I usually just type "reboot". But interestingly, I can't log back to openbox because the flickering will persist, only after a reboot the machine will work again.
Can anyone offer some advice? It would be very appreciated.
Offline
#2 2015-06-03 22:20:20
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: Strange problem when logging out of Openbox
Not an Installation issue, moving to NC...
Offline
#3 2015-06-04 02:48:32
- professorblargin
- Member
- From: Texas
- Registered: 2015-05-29
- Posts: 2
Re: Strange problem when logging out of Openbox
Well you're getting a permissions error, so you might have to chmod something. Does it still do this when you're logged in as root? If it still does it as root, then try installing that pyXDG package and see if that helps.
Offline
#4 2015-06-04 08:44:13
- shizi
- Member
- Registered: 2015-06-02
- Posts: 6
Re: Strange problem when logging out of Openbox
Yes, the problem also persists when I log in as root. The pyXDG package is already installed, but the problem is still there. Also, I'm not sure exactly which one of those error messages is fatal. I even tried to disable KMS, but couldn't log in to openbox anymore. Not sure what else I can try.
Offline
#5 2015-06-04 11:38:49
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,543
- Website
Re: Strange problem when logging out of Openbox
When you log out and get back to a working tty (even if not visible) where you say you can type "reboot" can you instead try typing "reset" to reinitialize the tty. If the graphical glitches persist in a restarted X session, I doubt reset will actually help, but it's worth a shot.
EDIT: coincidentally, I just installed arch on my new Lenovo T450s and I am having a problem that sounds very similar. The tty works fine until I log into X. Then after I log out of X I'm getting an odd glitch: the screen is sweeping right to left about 4-5 times per second. It is *almost* completely unreadable, but I can type in commands and they execute just fine. The sweeping continues even after switching to another tty or restarting X, "reset" does not help, only a reboot does. This is on an Intel Broadwell-U integrated graphics (rev 09).
Last edited by Trilby (2015-06-05 17:28:35)
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#6 2015-06-06 01:15:08
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,543
- Website
Re: Strange problem when logging out of Openbox
Shizi,
I'm starting to find other incidences that look similar to my issue on my new Broadwell. You gave some information on your card, but I'm not very well versed in what all these indicators mean: is yours a Broadwell too? If so, and if your issue is a similar horizontal-sync type problem, we could revise the title to focus on that rather than on openbox. If not, I don't want to end up hijacking your thread here.
EDIT: crossreference to solved thread that looks like the same issue.
Last edited by Trilby (2015-06-12 14:51:01)
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline