You are not logged in.
Hello,
I'm Nico, and this is my first topic in the forum. I've been using Archlinux for two years solving all my problems, but today I've found an error that I can't solve.
I've installed yesterday again all the system to make a raid 0 configuration on my disks. This is graphics card: "NVIDIA Corporation GF108 [GeForce GT 630]" and, to install its drivers I've used these commands:
# pacman -S --noconfirm nvidia-304xx lib32-nvidia-304xx-utils
# nvidia-xconfigand then, to install gdm, I just installed gnome and enabled the service:
# pacman -S --noconfirm gnome
# systemctl enable gdmBut now, when I turn on the computer, since gdm boots, no animations are displayed. I've looked the Xorg log file (/var/log/gdm is empty) and this is the content:
$ cat /var/log/Xorg.0.log
[ 25.727] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 25.727] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 25.727]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 25.727] X Protocol Version 11, Revision 0
[ 25.727] Build Operating System: Linux 4.0.4-2-ARCH x86_64
[ 25.727] Current Operating System: Linux SC 4.0.5-1-ARCH #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015 x86_64
[ 25.727] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5bc68509-934c-4a1a-9fb4-7b3792b064f9 rw quiet
[ 25.727] Build Date: 11 June 2015 10:52:10AM
[ 25.727]
[ 25.727] Current version of pixman: 0.32.6
[ 25.727] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.727] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.727] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 12 21:20:54 2015
[ 25.727] (==) Using config file: "/etc/X11/xorg.conf"
[ 25.727] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.727] (==) ServerLayout "Layout0"
[ 25.727] (**) |-->Screen "Screen0" (0)
[ 25.727] (**) | |-->Monitor "Monitor0"
[ 25.727] (**) | |-->Device "Device0"
[ 25.727] (**) |-->Input Device "Keyboard0"
[ 25.727] (**) |-->Input Device "Mouse0"
[ 25.727] (==) Automatically adding devices
[ 25.727] (==) Automatically enabling devices
[ 25.727] (==) Automatically adding GPU devices
[ 25.727] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 25.727] Entry deleted from font path.
[ 25.727] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 25.727] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 25.727] Entry deleted from font path.
[ 25.727] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 25.727] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 25.727] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.727] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 25.727] (WW) Disabling Keyboard0
[ 25.727] (WW) Disabling Mouse0
[ 25.727] (II) Loader magic: 0x816d60
[ 25.727] (II) Module ABI versions:
[ 25.727] X.Org ANSI C Emulation: 0.4
[ 25.727] X.Org Video Driver: 19.0
[ 25.727] X.Org XInput driver : 21.1
[ 25.727] X.Org Server Extension : 9.0
[ 25.729] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 25.729] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.729] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 25.730] (--) PCI:*(0:1:0:0) 10de:0f00:1043:8426 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 25.730] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 25.730] (II) LoadModule: "glx"
[ 25.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.731] (II) Module glx: vendor="X.Org Foundation"
[ 25.731] compiled for 1.17.1, module version = 1.0.0
[ 25.731] ABI class: X.Org Server Extension, version 9.0
[ 25.731] (==) AIGLX enabled
[ 25.731] (II) LoadModule: "nvidia"
[ 25.731] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 25.731] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 25.731] compiled for 4.0.2, module version = 1.0.0
[ 25.731] Module class: X.Org Video Driver
[ 25.731] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 20:00:30 PST 2014
[ 25.731] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.731] (++) using VT number 2
[ 25.731] (II) Loading sub module "fb"
[ 25.731] (II) LoadModule: "fb"
[ 25.731] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.731] (II) Module fb: vendor="X.Org Foundation"
[ 25.731] compiled for 1.17.1, module version = 1.0.0
[ 25.731] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.731] (II) Loading sub module "wfb"
[ 25.731] (II) LoadModule: "wfb"
[ 25.731] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.731] (II) Module wfb: vendor="X.Org Foundation"
[ 25.731] compiled for 1.17.1, module version = 1.0.0
[ 25.731] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.731] (II) Loading sub module "ramdac"
[ 25.731] (II) LoadModule: "ramdac"
[ 25.731] (II) Module "ramdac" already built-in
[ 25.732] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 25.732] (==) NVIDIA(0): RGB weight 888
[ 25.732] (==) NVIDIA(0): Default visual is TrueColor
[ 25.732] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.732] (**) NVIDIA(0): Enabling 2D acceleration
[ 25.732] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 25.732] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 25.732] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 25.732] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 25.732] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 25.759] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HL225D (DFP-0)) does not
[ 25.759] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 25.759] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:1:0:0 (GPU-0)
[ 25.759] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 25.759] (--) NVIDIA(0): VideoBIOS: 70.08.b1.00.00
[ 25.759] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 25.759] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 25.761] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:1:0:0
[ 25.761] (--) NVIDIA(0): CRT-0
[ 25.761] (--) NVIDIA(0): CRT-1
[ 25.761] (--) NVIDIA(0): HannStar Display Corp HL225D (DFP-0) (connected)
[ 25.761] (--) NVIDIA(0): DFP-1
[ 25.761] (--) NVIDIA(0): CRT-0: 160.0 MHz maximum pixel clock
[ 25.761] (--) NVIDIA(0): CRT-1: 480.0 MHz maximum pixel clock
[ 25.761] (--) NVIDIA(0): HannStar Display Corp HL225D (DFP-0): 330.0 MHz maximum pixel clock
[ 25.761] (--) NVIDIA(0): HannStar Display Corp HL225D (DFP-0): Internal Dual Link TMDS
[ 25.761] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 25.761] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 25.761] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.761] (**) NVIDIA(0): device HannStar Display Corp HL225D (DFP-0) (Using EDID
[ 25.761] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 25.762] (==) NVIDIA(0):
[ 25.762] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 25.762] (==) NVIDIA(0): will be used as the requested mode.
[ 25.762] (==) NVIDIA(0):
[ 25.762] (II) NVIDIA(0): Validated MetaModes:
[ 25.762] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 25.762] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 25.787] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 25.787] (--) NVIDIA(0): option
[ 25.787] (--) Depth 24 pixmap format is 32 bpp
[ 25.788] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 25.788] (II) NVIDIA: access.
[ 25.789] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 25.789] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 25.789] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 25.789] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 25.789] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 25.789] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 25.789] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 25.789] (II) NVIDIA(0): Config Options in the README.
[ 25.790] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 25.864] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.864] (==) NVIDIA(0): Backing store enabled
[ 25.864] (==) NVIDIA(0): Silken mouse enabled
[ 25.865] (**) NVIDIA(0): DPMS enabled
[ 25.865] (II) Loading sub module "dri2"
[ 25.865] (II) LoadModule: "dri2"
[ 25.865] (II) Module "dri2" already built-in
[ 25.865] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.865] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.865] (--) RandR disabled
[ 25.868] (II) AIGLX: Screen 0 is not DRI2 capable
[ 25.868] (EE) AIGLX: reverting to software rendering
[ 25.878] (II) AIGLX: Loaded and initialized swrast
[ 25.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 25.895] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.895] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.895] (II) LoadModule: "evdev"
[ 25.895] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.896] (II) Module evdev: vendor="X.Org Foundation"
[ 25.896] compiled for 1.17.1, module version = 2.9.2
[ 25.896] Module class: X.Org XInput Driver
[ 25.896] ABI class: X.Org XInput driver, version 21.0
[ 25.896] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 25.896] (II) Using input driver 'evdev' for 'Power Button'
[ 25.896] (**) Power Button: always reports core events
[ 25.896] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 25.896] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.896] (--) evdev: Power Button: Found keys
[ 25.896] (II) evdev: Power Button: Configuring as keyboard
[ 25.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[ 25.896] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.896] (**) Option "xkb_rules" "evdev"
[ 25.896] (**) Option "xkb_model" "pc104"
[ 25.896] (**) Option "xkb_layout" "us"
[ 25.914] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.914] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[ 25.914] (II) Using input driver 'evdev' for 'Power Button'
[ 25.914] (**) Power Button: always reports core events
[ 25.914] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 25.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.915] (--) evdev: Power Button: Found keys
[ 25.915] (II) evdev: Power Button: Configuring as keyboard
[ 25.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 25.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 25.915] (**) Option "xkb_rules" "evdev"
[ 25.915] (**) Option "xkb_model" "pc104"
[ 25.915] (**) Option "xkb_layout" "us"
[ 25.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.915] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.915] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 25.915] (II) No input driver specified, ignoring this device.
[ 25.915] (II) This device may have been added with another device file.
[ 25.916] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 25.916] (II) No input driver specified, ignoring this device.
[ 25.916] (II) This device may have been added with another device file.
[ 25.916] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 25.916] (II) No input driver specified, ignoring this device.
[ 25.916] (II) This device may have been added with another device file.
[ 25.916] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 25.916] (II) No input driver specified, ignoring this device.
[ 25.916] (II) This device may have been added with another device file.
[ 25.916] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event0)
[ 25.916] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 25.916] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[ 25.916] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 25.916] (**) USB Optical Mouse: always reports core events
[ 25.916] (**) evdev: USB Optical Mouse: Device: "/dev/input/event0"
[ 25.916] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 25.916] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 25.916] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 25.916] (--) evdev: USB Optical Mouse: Found relative axes
[ 25.916] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 25.916] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 25.916] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 25.916] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 25.916] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:1BCF:0005.0001/input/input2/event0"
[ 25.917] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[ 25.917] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 25.917] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 25.917] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 25.917] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 25.917] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 25.917] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 25.917] (II) No input driver specified, ignoring this device.
[ 25.917] (II) This device may have been added with another device file.
[ 25.917] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event1)
[ 25.917] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.917] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[ 25.917] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 25.917] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 25.917] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event1"
[ 25.917] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 25.917] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 25.917] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 25.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/0003:0518:0001.0002/input/input3/event1"
[ 25.917] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 9)
[ 25.917] (**) Option "xkb_rules" "evdev"
[ 25.917] (**) Option "xkb_model" "pc104"
[ 25.918] (**) Option "xkb_layout" "us"
[ 25.918] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[ 25.918] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.918] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[ 25.918] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 25.918] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 25.918] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[ 25.918] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[ 25.918] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 25.918] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[ 25.918] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 25.918] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[ 25.918] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 25.918] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.918] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/0003:0518:0001.0003/input/input4/event2"
[ 25.918] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 10)
[ 25.918] (**) Option "xkb_rules" "evdev"
[ 25.918] (**) Option "xkb_model" "pc104"
[ 25.918] (**) Option "xkb_layout" "us"
[ 25.918] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[ 25.918] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[ 25.919] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 25.919] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[ 25.919] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 25.919] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[ 25.919] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse1)
[ 25.919] (II) No input driver specified, ignoring this device.
[ 25.919] (II) This device may have been added with another device file.
[ 25.919] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
[ 25.919] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.919] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 32 paused 0
[ 25.919] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 25.919] (**) Eee PC WMI hotkeys: always reports core events
[ 25.919] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event11"
[ 25.919] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 25.919] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 25.919] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 25.919] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input14/event11"
[ 25.919] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 25.919] (**) Option "xkb_rules" "evdev"
[ 25.919] (**) Option "xkb_model" "pc104"
[ 25.919] (**) Option "xkb_layout" "us"
[ 25.920] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 25.920] (II) No input driver specified, ignoring this device.
[ 25.920] (II) This device may have been added with another device file.
[ 29.762] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HL225D (DFP-0)) does not
[ 29.762] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 29.762] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.762] (**) NVIDIA(0): device HannStar Display Corp HL225D (DFP-0) (Using EDID
[ 29.762] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 31.353] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HL225D (DFP-0)) does not
[ 31.353] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 31.353] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.353] (**) NVIDIA(0): device HannStar Display Corp HL225D (DFP-0) (Using EDID
[ 31.353] (**) NVIDIA(0): frequencies has been enabled on all display devices.)There are no animations at all: either in gdm or in gnome-shell (displaying user login screen, opening apps drawer...).
I don't know if it's related to, but glxgears output is this:
$ glxgears
8515 frames in 5.0 seconds = 1702.895 FPS
9543 frames in 5.0 seconds = 1908.543 FPS
9504 frames in 5.0 seconds = 1900.758 FPSEdit:
Finally, I could solve the problem. When I did pacman --noconfirm, I was automatically installing mesa-libgl and lib32-mesa-libgl. I did this:
# pacman -S nvidia-304xx-libgl lib32-nvidia-304xx-libgland now animations appear.
Last edited by nicovell3 (2015-06-13 10:02:50)
Offline