You are not logged in.

Pages: 1

#1 2015-07-17 07:51:38

pkztk
Member
Registered: 2013-05-09
Posts: 6

[SOLVED] Horizontal stripes on icons and windows

Hi Arch Users,

Im facing an annoying problem with the look of icons and windows on my desktop. Since a few updates ago I can see horizontal stripes on them (see attached file). The latest update doesnt fix it and I do not have a clear clue what to do about it. Searched through the forum already but havent found an unambiguous answer. Could you please advise?

Attachment

Last edited by pkztk (2015-07-17 09:52:22)

Offline

#2 2015-07-17 08:07:57

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [SOLVED] Horizontal stripes on icons and windows

Graphics card and driver? Have you read the troubleshooting section of the wiki for your card? Looked in xorg's log or your journal?

Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2015-07-17 08:55:21

pkztk
Member
Registered: 2013-05-09
Posts: 6

Re: [SOLVED] Horizontal stripes on icons and windows

I use an integrated Intel card. Here's the content of xorg's log file:

[   274.840] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   274.840] X Protocol Version 11, Revision 0
[   274.841] Build Operating System: Linux 3.17.6-1-ARCH i686 
[   274.841] Current Operating System: Linux kastor 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[   274.841] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=126cdc40-828b-459d-a846-c8d86c34341f ro verbose ipv6.disable=1 init=/usr/lib/systemd/systemd
[   274.841] Build Date: 11 February 2015  08:12:41AM
[   274.841]  
[   274.841] Current version of pixman: 0.32.6
[   274.841] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   274.841] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   274.841] (==) Log file: "/home/archie/.local/share/xorg/Xorg.0.log", Time: Thu Feb 12 19:18:46 2015
[   274.842] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   274.842] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   274.842] (==) No Layout section.  Using the first Screen section.
[   274.842] (==) No screen section available. Using defaults.
[   274.842] (**) |-->Screen "Default Screen Section" (0)
[   274.842] (**) |   |-->Monitor "<default monitor>"
[   274.842] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   274.842] (==) Automatically adding devices
[   274.842] (==) Automatically enabling devices
[   274.842] (==) Automatically adding GPU devices
[   274.842] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   274.842] 	Entry deleted from font path.
[   274.842] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   274.842] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/
[   274.842] (==) ModulePath set to "/usr/lib/xorg/modules"
[   274.842] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   274.842] (II) Loader magic: 0x82a2700
[   274.842] (II) Module ABI versions:
[   274.842] 	X.Org ANSI C Emulation: 0.4
[   274.842] 	X.Org Video Driver: 18.0
[   274.842] 	X.Org XInput driver : 21.0
[   274.842] 	X.Org Server Extension : 8.0
[   274.845] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[   274.846] (II) xfree86: Adding drm device (/dev/dri/card0)
[   274.846] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   274.848] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 rev 7, Mem @ 0xfd400000/4194304, 0xd0000000/268435456, I/O @ 0x00005c00/8
[   274.848] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 rev 7, Mem @ 0xfd300000/1048576
[   274.848] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   274.848] (II) LoadModule: "glx"
[   274.849] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   274.850] (II) Module glx: vendor="X.Org Foundation"
[   274.850] 	compiled for 1.16.4, module version = 1.0.0
[   274.850] 	ABI class: X.Org Server Extension, version 8.0
[   274.850] (==) AIGLX enabled
[   274.850] (==) Matched intel as autoconfigured driver 0
[   274.850] (==) Matched intel as autoconfigured driver 1
[   274.850] (==) Matched modesetting as autoconfigured driver 2
[   274.850] (==) Matched fbdev as autoconfigured driver 3
[   274.850] (==) Matched vesa as autoconfigured driver 4
[   274.850] (==) Assigned the driver to the xf86ConfigLayout
[   274.850] (II) LoadModule: "intel"
[   274.850] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   274.851] (II) Module intel: vendor="X.Org Foundation"
[   274.851] 	compiled for 1.16.3, module version = 2.99.917
[   274.851] 	Module class: X.Org Video Driver
[   274.851] 	ABI class: X.Org Video Driver, version 18.0
[   274.851] (II) LoadModule: "modesetting"
[   274.851] (WW) Warning, couldn't open module modesetting
[   274.851] (II) UnloadModule: "modesetting"
[   274.851] (II) Unloading modesetting
[   274.851] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   274.851] (II) LoadModule: "fbdev"
[   274.851] (WW) Warning, couldn't open module fbdev
[   274.851] (II) UnloadModule: "fbdev"
[   274.851] (II) Unloading fbdev
[   274.851] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   274.851] (II) LoadModule: "vesa"
[   274.852] (WW) Warning, couldn't open module vesa
[   274.852] (II) UnloadModule: "vesa"
[   274.852] (II) Unloading vesa
[   274.852] (EE) Failed to load module "vesa" (module does not exist, 0)
[   274.852] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   274.852] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[   274.852] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[   274.852] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[   274.852] (++) using VT number 1

[   274.852] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   274.852] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   274.852] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[   274.852] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   274.853] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[   274.853] (--) intel(0): CPU: x86, sse2, sse3, ssse3
[   274.853] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   274.853] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   274.853] (==) intel(0): RGB weight 888
[   274.853] (==) intel(0): Default visual is TrueColor
[   274.853] (II) intel(0): Output LVDS1 has no monitor section
[   274.854] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[   274.854] (II) intel(0): Enabled output LVDS1
[   274.854] (II) intel(0): Output VGA1 has no monitor section
[   274.854] (II) intel(0): Enabled output VGA1
[   274.854] (II) intel(0): Output HDMI1 has no monitor section
[   274.854] (II) intel(0): Enabled output HDMI1
[   274.854] (II) intel(0): Output DP1 has no monitor section
[   274.854] (II) intel(0): Enabled output DP1
[   274.854] (II) intel(0): Output DP2 has no monitor section
[   274.854] (II) intel(0): Enabled output DP2
[   274.854] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   274.854] (II) intel(0): Output VIRTUAL1 has no monitor section
[   274.854] (II) intel(0): Enabled output VIRTUAL1
[   274.854] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[   274.854] (==) intel(0): TearFree disabled
[   274.854] (==) intel(0): DPI set to (96, 96)
[   274.854] (II) Loading sub module "dri2"
[   274.854] (II) LoadModule: "dri2"
[   274.854] (II) Module "dri2" already built-in
[   274.854] (II) Loading sub module "present"
[   274.854] (II) LoadModule: "present"
[   274.854] (II) Module "present" already built-in
[   274.854] (==) Depth 24 pixmap format is 32 bpp
[   274.855] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[   274.855] (==) intel(0): Backing store enabled
[   274.855] (==) intel(0): Silken mouse enabled
[   274.855] (II) intel(0): HW Cursor enabled
[   274.855] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   274.855] (==) intel(0): DPMS enabled
[   274.855] (==) intel(0): display hotplug detection enabled
[   274.855] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   274.855] (II) intel(0): [DRI2] Setup complete
[   274.855] (II) intel(0): [DRI2]   DRI driver: i965
[   274.855] (II) intel(0): [DRI2]   VDPAU driver: i965
[   274.855] (II) intel(0): direct rendering: DRI2 enabled
[   274.855] (II) intel(0): hardware support for Present enabled
[   274.855] (--) RandR disabled
[   274.876] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   274.876] (II) AIGLX: enabled GLX_ARB_create_context
[   274.876] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   274.876] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   274.876] (II) AIGLX: enabled GLX_INTEL_swap_event
[   274.876] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   274.876] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   274.876] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   274.876] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   274.876] (II) AIGLX: Loaded and initialized i965
[   274.876] (II) GLX: Initialized DRI2 GL provider for screen 0
[   274.882] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[   274.903] (II) intel(0): Setting screen physical size to 338 x 211
[   275.002] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   275.002] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   275.002] (**) Power Button: Applying InputClass "system-keyboard"
[   275.002] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   275.002] (II) LoadModule: "evdev"
[   275.002] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   275.003] (II) Module evdev: vendor="X.Org Foundation"
[   275.003] 	compiled for 1.16.2, module version = 2.9.1
[   275.003] 	Module class: X.Org XInput Driver
[   275.003] 	ABI class: X.Org XInput driver, version 21.0
[   275.004] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 12 paused 0
[   275.004] (II) Using input driver 'evdev' for 'Power Button'
[   275.004] (**) Power Button: always reports core events
[   275.004] (**) evdev: Power Button: Device: "/dev/input/event5"
[   275.004] (--) evdev: Power Button: Vendor 0 Product 0x1
[   275.004] (--) evdev: Power Button: Found keys
[   275.004] (II) evdev: Power Button: Configuring as keyboard
[   275.004] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[   275.004] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   275.004] (**) Option "xkb_rules" "evdev"
[   275.004] (**) Option "xkb_model" "pc104"
[   275.004] (**) Option "xkb_layout" "pl"
[   275.033] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   275.033] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   275.033] (**) Video Bus: Applying InputClass "system-keyboard"
[   275.033] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   275.034] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 13 paused 0
[   275.034] (II) Using input driver 'evdev' for 'Video Bus'
[   275.034] (**) Video Bus: always reports core events
[   275.034] (**) evdev: Video Bus: Device: "/dev/input/event8"
[   275.034] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   275.034] (--) evdev: Video Bus: Found keys
[   275.034] (II) evdev: Video Bus: Configuring as keyboard
[   275.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8"
[   275.034] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   275.034] (**) Option "xkb_rules" "evdev"
[   275.034] (**) Option "xkb_model" "pc104"
[   275.034] (**) Option "xkb_layout" "pl"
[   275.035] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[   275.035] (II) No input driver specified, ignoring this device.
[   275.035] (II) This device may have been added with another device file.
[   275.035] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   275.035] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   275.035] (**) Sleep Button: Applying InputClass "system-keyboard"
[   275.035] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   275.036] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[   275.036] (II) Using input driver 'evdev' for 'Sleep Button'
[   275.036] (**) Sleep Button: always reports core events
[   275.036] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[   275.036] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   275.036] (--) evdev: Sleep Button: Found keys
[   275.036] (II) evdev: Sleep Button: Configuring as keyboard
[   275.036] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[   275.036] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   275.036] (**) Option "xkb_rules" "evdev"
[   275.036] (**) Option "xkb_model" "pc104"
[   275.036] (**) Option "xkb_layout" "pl"
[   275.037] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   275.037] (II) No input driver specified, ignoring this device.
[   275.037] (II) This device may have been added with another device file.
[   275.038] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[   275.038] (II) No input driver specified, ignoring this device.
[   275.038] (II) This device may have been added with another device file.
[   275.038] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
[   275.038] (II) No input driver specified, ignoring this device.
[   275.038] (II) This device may have been added with another device file.
[   275.038] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
[   275.038] (II) No input driver specified, ignoring this device.
[   275.038] (II) This device may have been added with another device file.
[   275.039] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[   275.039] (II) No input driver specified, ignoring this device.
[   275.039] (II) This device may have been added with another device file.
[   275.039] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event14)
[   275.039] (II) No input driver specified, ignoring this device.
[   275.039] (II) This device may have been added with another device file.
[   275.040] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[   275.040] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   275.040] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   275.040] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0
[   275.040] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   275.040] (**) Logitech USB Receiver: always reports core events
[   275.040] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[   275.041] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   275.041] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   275.041] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   275.041] (--) evdev: Logitech USB Receiver: Found relative axes
[   275.041] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   275.041] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   275.041] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   275.041] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   275.041] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   275.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/0003:046D:C52F.0001/input/input5/event1"
[   275.041] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[   275.041] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   275.041] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   275.041] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   275.041] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   275.041] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   275.042] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   275.042] (II) No input driver specified, ignoring this device.
[   275.042] (II) This device may have been added with another device file.
[   275.042] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[   275.042] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   275.042] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[   275.042] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   275.043] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[   275.043] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   275.043] (**) Logitech USB Receiver: always reports core events
[   275.043] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[   275.043] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   275.043] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   275.043] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   275.043] (--) evdev: Logitech USB Receiver: Found relative axes
[   275.043] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   275.043] (--) evdev: Logitech USB Receiver: Found absolute axes
[   275.043] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   275.043] (--) evdev: Logitech USB Receiver: Found keys
[   275.043] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   275.043] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   275.044] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   275.044] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   275.044] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   275.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/input/input6/event2"
[   275.044] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[   275.044] (**) Option "xkb_rules" "evdev"
[   275.044] (**) Option "xkb_model" "pc104"
[   275.044] (**) Option "xkb_layout" "pl"
[   275.044] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   275.044] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   275.044] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   275.044] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   275.044] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   275.044] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   275.045] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[   275.045] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[   275.045] (**) Asus Laptop extra buttons: Applying InputClass "system-keyboard"
[   275.045] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[   275.045] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 17 paused 0
[   275.045] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[   275.045] (**) Asus Laptop extra buttons: always reports core events
[   275.045] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event6"
[   275.045] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[   275.045] (--) evdev: Asus Laptop extra buttons: Found keys
[   275.045] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[   275.045] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input10/event6"
[   275.045] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[   275.045] (**) Option "xkb_rules" "evdev"
[   275.045] (**) Option "xkb_model" "pc104"
[   275.045] (**) Option "xkb_layout" "pl"
[   275.046] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   275.046] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   275.046] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[   275.046] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   275.047] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[   275.047] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   275.047] (**) AT Translated Set 2 keyboard: always reports core events
[   275.047] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   275.047] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   275.047] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   275.047] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   275.047] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   275.047] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   275.047] (**) Option "xkb_rules" "evdev"
[   275.047] (**) Option "xkb_model" "pc104"
[   275.047] (**) Option "xkb_layout" "pl"
[   275.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[   275.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   275.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   275.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   275.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   275.048] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 19 paused 0
[   275.048] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[   275.048] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   275.048] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7"
[   275.048] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   275.048] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[   275.048] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[   275.048] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[   275.048] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[   275.048] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[   275.048] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[   275.048] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   275.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event7"
[   275.049] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   275.049] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[   275.049] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   275.049] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   275.049] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   275.049] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   275.049] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   275.049] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   275.050] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[   275.050] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   275.050] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   275.050] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 20 paused 0
[   275.050] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[   275.050] (**) TPPS/2 IBM TrackPoint: always reports core events
[   275.050] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[   275.050] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[   275.050] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[   275.050] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[   275.050] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[   275.050] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[   275.050] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   275.050] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   275.050] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input16/event15"
[   275.050] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[   275.050] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[   275.051] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   275.051] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   275.051] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   275.051] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   275.051] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[   275.051] (II) No input driver specified, ignoring this device.
[   275.051] (II) This device may have been added with another device file.
[   275.678] (II) intel(0): EDID vendor "LEN", prod id 16471
[   275.678] (II) intel(0): Printing DDC gathered Modelines:
[   275.678] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1304 1336 1408  800 804 808 820 -hsync -vsync (49.2 kHz eP)
[   275.678] (II) intel(0): Modeline "1280x800"x0.0   57.80  1280 1304 1336 1408  800 804 808 820 -hsync -vsync (41.1 kHz e)
[   276.140] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

Offline

#4 2015-07-17 09:10:06

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [SOLVED] Horizontal stripes on icons and windows

According to the log, you're using sna, try switching to uxa: https://wiki.archlinux.org/index.php/In … SNA_issues

According to the log, you're also using an old xorg-server and kernel. Read https://wiki.archlinux.org/index.php/Xo … leshooting and doublecheck if you pasted the latest log.

Offline

#5 2015-07-17 09:51:20

pkztk
Member
Registered: 2013-05-09
Posts: 6

Re: [SOLVED] Horizontal stripes on icons and windows

Switching to uxa fixed the issue. Thank you.

Offline

Pages: 1

Board footer

Powered by FluxBB