Arch Linux

Banderas

Member

Registered: 2015-08-11

Posts: 12

No sound in alsamixer

Hi!
I set all sounds in my alsamixer on full and sound doesnt work. Can anybody help me?
My card is Xonar DG AUDIO.

[denek@archhost ~]$ lspci | grep -i audio
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
06:01.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]

[denek@archhost ~]$ aplay -lL;
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=DG
    Xonar DG, Multichannel
    Default Audio Device
front:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Front speakers
surround21:CARD=DG,DEV=0
    Xonar DG, Multichannel
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.0 Surround output to Front and Rear speakers
surround41:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DG,DEV=0
    Xonar DG, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DG,DEV=0
    Xonar DG, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: DG [Xonar DG], device 1: Digital [Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

[denek@archhost ~]$ modinfo soundcore
filename:       /lib/modules/4.1.4-1-ARCH/kernel/sound/soundcore.ko.gz
alias:          char-major-14-*
license:        GPL
author:         Alan Cox
description:    Core sound module
depends:        
intree:         Y
vermagic:       4.1.4-1-ARCH SMP preempt mod_unload modversions 
parm:           preclaim_oss:int

Last edited by Banderas (2015-08-11 21:53:02)

Malkymder

Member

Registered: 2015-05-13

Posts: 258

Re: No sound in alsamixer

You set volume to 100 but did you check if it was muted ? shows 'MM' at the bottom when muted (pressing 'M' toggles it)...