[SOLVED] Touchpad not working (on Acer CB3-111)

dioib · 2015-09-06 08:38:27

I am also struggling with the audio but that is for another time; please help, I don't want to go back to Ubuntu and I need to get this working as it is my work machine. I have installed the following package(s):

xf86-input-synaptics
gpointing-device-settings //read somewhere that it might contribute

but it doesn't work in X (herbstluftwm/i3). Invoking:

synclient TouchpadOff=0

returns

'Couldn't find synaptics properties. No synaptics driver loaded?'

Earlier this week after breaking free from Chrome OS I installed Arch and the touchpad worked for a while but then stopped working; I read somewhere that invoking 'poweroff' might cause problems with touchpad to function. But this is a fresh install (yesterday) after going through a bunch of other distros (couldn't install Slackware, 'fdisk' didn't see the disk); among them only Ubuntu 14/15 and (I think) Archbang managed to get it to respond.

I would mostly need it for browsing the web (decently - I have already installed 'links') but I do need it for that.

Last edited by dioib (2015-09-07 22:06:24)

ewaller · 2015-09-06 15:54:26

Please post the output of cat /sys/class/input/event*/device/name
How are you starting Xorg? Do you know how to find your Xorg logs?

dioib · 2015-09-06 16:40:26

Thank you for your response; here is the output of cat /sys/class/input/event*/device/name:

AT Translated Set 2 keyboard
Lid Switch
Power Button
Sleep Button
Sleep Button
Power Button
PC Speaker
HDA Intel PCH HDMI/DP,pcm=7
HDA Intel PCH HDMI/DP,pcm=3
HD WebCam

I start the Xorg with startx; I located the Xorg log.

ewaller · 2015-09-06 17:05:32

Could you post the log? That list of event devices does not look encouraging.

dioib · 2015-09-06 17:30:05

I thought so; here is the log:

[  4436.944] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[  4436.949] X Protocol Version 11, Revision 0
[  4436.951] Build Operating System: Linux 4.0.4-2-ARCH x86_64 
[  4436.953] Current Operating System: Linux acer 3.14.51-1-lts #1 SMP Mon Aug 17 19:21:08 CEST 2015 x86_64
[  4436.953] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mmcblk0p1 rw quiet
[  4436.956] Build Date: 17 July 2015  05:38:19PM
[  4436.957]  
[  4436.959] Current version of pixman: 0.32.6
[  4436.962] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  4436.962] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4436.969] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep  6 13:15:50 2015
[  4436.975] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4436.976] (==) No Layout section.  Using the first Screen section.
[  4436.976] (==) No screen section available. Using defaults.
[  4436.976] (**) |-->Screen "Default Screen Section" (0)
[  4436.976] (**) |   |-->Monitor "<default monitor>"
[  4436.978] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  4436.978] (==) Automatically adding devices
[  4436.978] (==) Automatically enabling devices
[  4436.978] (==) Automatically adding GPU devices
[  4436.980] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  4436.980] 	Entry deleted from font path.
[  4436.980] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  4436.980] 	Entry deleted from font path.
[  4436.980] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  4436.980] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  4436.980] 	Entry deleted from font path.
[  4436.980] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  4436.980] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[  4436.981] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4436.981] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4436.981] (II) Loader magic: 0x817d60
[  4436.981] (II) Module ABI versions:
[  4436.981] 	X.Org ANSI C Emulation: 0.4
[  4436.981] 	X.Org Video Driver: 19.0
[  4436.981] 	X.Org XInput driver : 21.1
[  4436.981] 	X.Org Server Extension : 9.0
[  4436.984] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  4436.986] (II) xfree86: Adding drm device (/dev/dri/card0)
[  4436.986] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  4436.987] (--) PCI:*(0:0:2:0) 8086:0f31:8086:0f31 rev 14, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00001000/8
[  4436.988] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  4436.988] (II) LoadModule: "glx"
[  4436.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4436.994] (II) Module glx: vendor="X.Org Foundation"
[  4436.994] 	compiled for 1.17.2, module version = 1.0.0
[  4436.994] 	ABI class: X.Org Server Extension, version 9.0
[  4436.994] (==) AIGLX enabled
[  4436.994] (==) Matched intel as autoconfigured driver 0
[  4436.994] (==) Matched intel as autoconfigured driver 1
[  4436.994] (==) Matched modesetting as autoconfigured driver 2
[  4436.994] (==) Matched fbdev as autoconfigured driver 3
[  4436.994] (==) Matched vesa as autoconfigured driver 4
[  4436.994] (==) Assigned the driver to the xf86ConfigLayout
[  4436.994] (II) LoadModule: "intel"
[  4436.995] (WW) Warning, couldn't open module intel
[  4436.995] (II) UnloadModule: "intel"
[  4436.995] (II) Unloading intel
[  4436.995] (EE) Failed to load module "intel" (module does not exist, 0)
[  4436.995] (II) LoadModule: "modesetting"
[  4436.995] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  4436.996] (II) Module modesetting: vendor="X.Org Foundation"
[  4436.996] 	compiled for 1.17.2, module version = 1.17.2
[  4436.996] 	Module class: X.Org Video Driver
[  4436.996] 	ABI class: X.Org Video Driver, version 19.0
[  4436.996] (II) LoadModule: "fbdev"
[  4436.997] (WW) Warning, couldn't open module fbdev
[  4436.997] (II) UnloadModule: "fbdev"
[  4436.997] (II) Unloading fbdev
[  4436.997] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  4436.997] (II) LoadModule: "vesa"
[  4436.997] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  4436.997] (II) Module vesa: vendor="X.Org Foundation"
[  4436.997] 	compiled for 1.17.2, module version = 2.3.4
[  4436.997] 	Module class: X.Org Video Driver
[  4436.997] 	ABI class: X.Org Video Driver, version 19.0
[  4436.998] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  4436.998] (II) VESA: driver for VESA chipsets: vesa
[  4436.998] (++) using VT number 1

[  4436.998] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  4436.998] (II) modeset(0): using drv /dev/dri/card0
[  4436.998] (WW) Falling back to old probe method for vesa
[  4436.998] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  4436.998] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  4436.998] (==) modeset(0): RGB weight 888
[  4436.998] (==) modeset(0): Default visual is TrueColor
[  4436.998] (II) Loading sub module "glamoregl"
[  4436.998] (II) LoadModule: "glamoregl"
[  4436.998] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  4437.012] (II) Module glamoregl: vendor="X.Org Foundation"
[  4437.012] 	compiled for 1.17.2, module version = 1.0.0
[  4437.012] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4437.012] (II) glamor: OpenGL accelerated X.org driver based.
[  4437.174] (II) glamor: EGL version 1.4 (DRI2):
[  4437.210] (II) modeset(0): glamor initialized
[  4437.211] (II) Loading sub module "dri2"
[  4437.211] (II) LoadModule: "dri2"
[  4437.211] (II) Module "dri2" already built-in
[  4437.211] (II) modeset(0): Output eDP-0 has no monitor section
[  4437.300] (II) modeset(0): Output VGA-0 has no monitor section
[  4437.300] (II) modeset(0): Output HDMI-0 has no monitor section
[  4437.300] (II) modeset(0): Output DisplayPort-0 has no monitor section
[  4437.320] (II) modeset(0): Output HDMI-1 has no monitor section
[  4437.321] (II) modeset(0): EDID for output eDP-0
[  4437.321] (II) modeset(0): Manufacturer: CMN  Model: 1132  Serial#: 0
[  4437.321] (II) modeset(0): Year: 2013  Week: 19
[  4437.321] (II) modeset(0): EDID Version: 1.4
[  4437.321] (II) modeset(0): Digital Display Input
[  4437.321] (II) modeset(0): 6 bits per channel
[  4437.321] (II) modeset(0): Digital interface is DisplayPort
[  4437.321] (II) modeset(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[  4437.321] (II) modeset(0): Gamma: 2.20
[  4437.321] (II) modeset(0): No DPMS capabilities specified
[  4437.321] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[  4437.321] (II) modeset(0): First detailed timing is preferred mode
[  4437.321] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  4437.321] (II) modeset(0): redX: 0.570 redY: 0.333   greenX: 0.325 greenY: 0.582
[  4437.321] (II) modeset(0): blueX: 0.160 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[  4437.321] (II) modeset(0): Manufacturer's mask: 0
[  4437.321] (II) modeset(0): Supported detailed timing:
[  4437.321] (II) modeset(0): clock: 76.4 MHz   Image Size:  256 x 144 mm
[  4437.321] (II) modeset(0): h_active: 1366  h_sync: 1502  h_sync_end 1532 h_blank_end 1592 h_border: 0
[  4437.321] (II) modeset(0): v_active: 768  v_sync: 776  v_sync_end 788 v_blanking: 800 v_border: 0
[  4437.321] (II) modeset(0):  N116BGE-EA2
[  4437.321] (II) modeset(0):  CMN
[  4437.321] (II) modeset(0):  N116BGE-EA2
[  4437.321] (II) modeset(0): EDID (in hex):
[  4437.321] (II) modeset(0): 	00ffffffffffff000dae321100000000
[  4437.321] (II) modeset(0): 	13170104951a0e780214359255539529
[  4437.321] (II) modeset(0): 	24505400000001010101010101010101
[  4437.321] (II) modeset(0): 	010101010101da1d56e250002030881e
[  4437.322] (II) modeset(0): 	8c00009010000018000000fe004e3131
[  4437.322] (II) modeset(0): 	364247452d4541320a20000000fe0043
[  4437.322] (II) modeset(0): 	4d4e0a202020202020202020000000fe
[  4437.322] (II) modeset(0): 	004e3131364247452d4541320a200048
[  4437.322] (II) modeset(0): Printing probed modes for output eDP-0
[  4437.322] (II) modeset(0): Modeline "1366x768"x60.0   76.42  1366 1502 1532 1592  768 776 788 800 -hsync -vsync (48.0 kHz eP)
[  4437.322] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  4437.322] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  4437.322] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  4437.322] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  4437.322] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  4437.322] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  4437.322] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  4437.322] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  4437.322] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  4437.322] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  4437.322] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  4437.322] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  4437.322] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  4437.323] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  4437.323] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  4437.323] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  4437.400] (II) modeset(0): EDID for output VGA-0
[  4437.400] (II) modeset(0): EDID for output HDMI-0
[  4437.400] (II) modeset(0): EDID for output DisplayPort-0
[  4437.420] (II) modeset(0): EDID for output HDMI-1
[  4437.420] (II) modeset(0): Output eDP-0 connected
[  4437.420] (II) modeset(0): Output VGA-0 disconnected
[  4437.420] (II) modeset(0): Output HDMI-0 disconnected
[  4437.420] (II) modeset(0): Output DisplayPort-0 disconnected
[  4437.420] (II) modeset(0): Output HDMI-1 disconnected
[  4437.420] (II) modeset(0): Using exact sizes for initial modes
[  4437.420] (II) modeset(0): Output eDP-0 using initial mode 1366x768
[  4437.420] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4437.420] (==) modeset(0): DPI set to (96, 96)
[  4437.420] (II) Loading sub module "fb"
[  4437.420] (II) LoadModule: "fb"
[  4437.420] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4437.468] (II) Module fb: vendor="X.Org Foundation"
[  4437.468] 	compiled for 1.17.2, module version = 1.0.0
[  4437.468] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4437.468] (II) UnloadModule: "vesa"
[  4437.468] (II) Unloading vesa
[  4437.468] (==) Depth 24 pixmap format is 32 bpp
[  4437.627] (==) modeset(0): Backing store enabled
[  4437.627] (==) modeset(0): Silken mouse enabled
[  4437.674] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4437.675] (==) modeset(0): DPMS enabled
[  4437.675] (II) modeset(0): [DRI2] Setup complete
[  4437.675] (II) modeset(0): [DRI2]   DRI driver: i965
[  4437.675] (II) modeset(0): [DRI2]   VDPAU driver: i965
[  4437.710] (--) RandR disabled
[  4437.797] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4437.797] (II) AIGLX: enabled GLX_ARB_create_context
[  4437.797] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  4437.797] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  4437.797] (II) AIGLX: enabled GLX_INTEL_swap_event
[  4437.797] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  4437.797] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  4437.797] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  4437.797] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  4437.797] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  4437.797] (II) AIGLX: Loaded and initialized i965
[  4437.797] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4437.850] (II) modeset(0): Setting screen physical size to 361 x 203
[  4437.942] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[  4437.942] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4437.942] (II) LoadModule: "evdev"
[  4437.942] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4437.945] (II) Module evdev: vendor="X.Org Foundation"
[  4437.945] 	compiled for 1.17.1, module version = 2.9.2
[  4437.945] 	Module class: X.Org XInput Driver
[  4437.945] 	ABI class: X.Org XInput driver, version 21.0
[  4437.946] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 15 paused 0
[  4437.946] (II) Using input driver 'evdev' for 'Power Button'
[  4437.946] (**) Power Button: always reports core events
[  4437.946] (**) evdev: Power Button: Device: "/dev/input/event5"
[  4437.946] (--) evdev: Power Button: Vendor 0 Product 0x1
[  4437.946] (--) evdev: Power Button: Found keys
[  4437.946] (II) evdev: Power Button: Configuring as keyboard
[  4437.946] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[  4437.946] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4437.946] (**) Option "xkb_rules" "evdev"
[  4437.946] (**) Option "xkb_model" "pc104"
[  4437.947] (**) Option "xkb_layout" "us"
[  4437.997] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  4437.997] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4437.998] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[  4437.998] (II) Using input driver 'evdev' for 'Power Button'
[  4437.998] (**) Power Button: always reports core events
[  4437.998] (**) evdev: Power Button: Device: "/dev/input/event2"
[  4437.998] (--) evdev: Power Button: Vendor 0 Product 0x1
[  4437.998] (--) evdev: Power Button: Found keys
[  4437.998] (II) evdev: Power Button: Configuring as keyboard
[  4437.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[  4437.998] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  4437.998] (**) Option "xkb_rules" "evdev"
[  4437.998] (**) Option "xkb_model" "pc104"
[  4437.998] (**) Option "xkb_layout" "us"
[  4437.999] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  4437.999] (II) No input driver specified, ignoring this device.
[  4437.999] (II) This device may have been added with another device file.
[  4438.000] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[  4438.000] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  4438.001] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[  4438.001] (II) Using input driver 'evdev' for 'Sleep Button'
[  4438.001] (**) Sleep Button: always reports core events
[  4438.001] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[  4438.001] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  4438.001] (--) evdev: Sleep Button: Found keys
[  4438.001] (II) evdev: Sleep Button: Configuring as keyboard
[  4438.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[  4438.001] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  4438.001] (**) Option "xkb_rules" "evdev"
[  4438.001] (**) Option "xkb_model" "pc104"
[  4438.001] (**) Option "xkb_layout" "us"
[  4438.002] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[  4438.002] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  4438.003] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 18 paused 0
[  4438.003] (II) Using input driver 'evdev' for 'Sleep Button'
[  4438.003] (**) Sleep Button: always reports core events
[  4438.003] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[  4438.003] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  4438.003] (--) evdev: Sleep Button: Found keys
[  4438.003] (II) evdev: Sleep Button: Configuring as keyboard
[  4438.003] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input4/event4"
[  4438.003] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  4438.003] (**) Option "xkb_rules" "evdev"
[  4438.003] (**) Option "xkb_model" "pc104"
[  4438.003] (**) Option "xkb_layout" "us"
[  4438.005] (II) config/udev: Adding input device HD WebCam (/dev/input/event9)
[  4438.005] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[  4438.006] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 19 paused 0
[  4438.006] (II) Using input driver 'evdev' for 'HD WebCam'
[  4438.006] (**) HD WebCam: always reports core events
[  4438.006] (**) evdev: HD WebCam: Device: "/dev/input/event9"
[  4438.006] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c67
[  4438.006] (--) evdev: HD WebCam: Found keys
[  4438.006] (II) evdev: HD WebCam: Configuring as keyboard
[  4438.006] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event9"
[  4438.006] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 10)
[  4438.006] (**) Option "xkb_rules" "evdev"
[  4438.006] (**) Option "xkb_model" "pc104"
[  4438.007] (**) Option "xkb_layout" "us"
[  4438.008] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[  4438.008] (II) No input driver specified, ignoring this device.
[  4438.008] (II) This device may have been added with another device file.
[  4438.008] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event7)
[  4438.008] (II) No input driver specified, ignoring this device.
[  4438.008] (II) This device may have been added with another device file.
[  4438.009] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  4438.009] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4438.010] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  4438.010] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  4438.010] (**) AT Translated Set 2 keyboard: always reports core events
[  4438.010] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  4438.010] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  4438.010] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  4438.010] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  4438.010] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  4438.010] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  4438.010] (**) Option "xkb_rules" "evdev"
[  4438.010] (**) Option "xkb_model" "pc104"
[  4438.010] (**) Option "xkb_layout" "us"
[  4438.011] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  4438.011] (II) No input driver specified, ignoring this device.
[  4438.011] (II) This device may have been added with another device file.
[  4444.432] (II) evdev: AT Translated Set 2 keyboard: Close
[  4444.432] (II) UnloadModule: "evdev"
[  4444.433] (II) systemd-logind: releasing fd for 13:64
[  4444.530] (II) evdev: HD WebCam: Close
[  4444.530] (II) UnloadModule: "evdev"
[  4444.530] (II) systemd-logind: releasing fd for 13:73
[  4444.590] (II) evdev: Sleep Button: Close
[  4444.590] (II) UnloadModule: "evdev"
[  4444.590] (II) systemd-logind: releasing fd for 13:68
[  4444.620] (II) evdev: Sleep Button: Close
[  4444.620] (II) UnloadModule: "evdev"
[  4444.620] (II) systemd-logind: releasing fd for 13:67
[  4444.650] (II) evdev: Power Button: Close
[  4444.650] (II) UnloadModule: "evdev"
[  4444.650] (II) systemd-logind: releasing fd for 13:66
[  4444.680] (II) evdev: Power Button: Close
[  4444.680] (II) UnloadModule: "evdev"
[  4444.680] (II) systemd-logind: releasing fd for 13:69
[  4447.408] (II) Server terminated successfully (0). Closing log file.

The weird/sad thing is that Arch used to see it last time (at least for a while).

Last edited by dioib (2015-09-06 17:36:28)

ewaller · 2015-09-06 17:44:08

Yeah, it is not seeing it. What kernel are you using? ( uname -a )

Edit. Never mind. it is 4.0. What if you upgrade to 4.2 (in testing)?
Edit: Or at least to 4.1 in core?
Edit: Actually, how about a full pacman -Syu

Last edited by ewaller (2015-09-06 17:49:02)

loqs · 2015-09-06 18:08:41

@ewaller

[  4436.953] Current Operating System: Linux acer 3.14.51-1-lts

On an unrelated note it does seem to be missing the xf86-video-intel package as it is falling back to the modesetting driver.
Is the xf86-input-synaptics package installed?
--
Edit Spelling

Last edited by loqs (2015-09-06 18:09:10)

dioib · 2015-09-06 18:20:50

loqs is right; it's the LTS kernel; I can't run the current kernel without chroot (it fails initializing stuff and halts). I will install the xf86-video-intel package, but the synaptics package is already there.

Last edited by dioib (2015-09-06 18:21:51)

loqs · 2015-09-06 19:49:36

dioib wrote:

Earlier this week after breaking free from Chrome OS I installed Arch and the touchpad worked for a while but then stopped working; I read somewhere that invoking 'poweroff' might cause problems with touchpad to function. But this is a fresh install (yesterday) after going through a bunch of other distros (couldn't install Slackware, 'fdisk' didn't see the disk); among them only Ubuntu 14/15 and (I think) Archbang managed to get it to respond.

Do you know which kernel versions the the distros that could use access the touchpad were using or even better have an Xorg log from one of them.
Also is the touchpad showing up via lspci or lsusb?
Might be worth starting a separate thread ( if you have not already done so ) to address the issue with the 4.1 kernel as driver support may have been added since 3.14.

dioib · 2015-09-06 20:42:07

Unfortunately I don't remember the kernel versions; I have installed Arch, Ubuntu 14/15, Archbang and tried Ubuntu 12, Back Box, Crunchbang, LXLE plus, perhaps, up to two others --in the past few days.

Here is the output of lspci:

00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)

and lsusb:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07dc Intel Corp. 
Bus 001 Device 002: ID 1bcf:2c67 Sunplus Innovation Technology Inc. 
Bus 001 Device 011: ID 3538:0054 Power Quotient International Co., Ltd Flash Drive (2GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I don't know what I should exactly be looking for.
I'll reinstall Ubuntu to see what is the kernel it settles for; I noticed it was downloading another kernel but don't remember the version.

Edit: That download was after the fact but I'll check the kernel version anyway.

Last edited by dioib (2015-09-06 20:52:52)

dioib · 2015-09-06 21:34:08

loqs wrote:

dioib wrote:
Earlier this week after breaking free from Chrome OS I installed Arch and the touchpad worked for a while but then stopped working; I read somewhere that invoking 'poweroff' might cause problems with touchpad to function. But this is a fresh install (yesterday) after going through a bunch of other distros (couldn't install Slackware, 'fdisk' didn't see the disk); among them only Ubuntu 14/15 and (I think) Archbang managed to get it to respond.
Do you know which kernel versions the the distros that could use access the touchpad were using or even better have an Xorg log from one of them.
Also is the touchpad showing up via lspci or lsusb?
Might be worth starting a separate thread ( if you have not already done so ) to address the issue with the 4.1 kernel as driver support may have been added since 3.14.

Here is the Xorg.log of Ubuntu 14.04.3 in 'try' mode (touchpad is working just fine):

[    71.360] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[    71.360] X Protocol Version 11, Revision 0
[    71.360] Build Operating System: Linux 3.2.0-77-generic x86_64 Ubuntu
[    71.360] Current Operating System: Linux ubuntu 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 x86_64
[    71.360] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    71.360] Build Date: 13 May 2015  04:35:05AM
[    71.360] xorg-server 2:1.17.1-0ubuntu3~trusty1 (For technical support please see http://www.ubuntu.com/support) 
[    71.360] Current version of pixman: 0.30.2
[    71.360] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    71.360] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    71.360] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep  6 21:15:11 2015
[    71.360] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    71.361] (==) No Layout section.  Using the first Screen section.
[    71.361] (==) No screen section available. Using defaults.
[    71.361] (**) |-->Screen "Default Screen Section" (0)
[    71.361] (**) |   |-->Monitor "<default monitor>"
[    71.361] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    71.361] (==) Automatically adding devices
[    71.361] (==) Automatically enabling devices
[    71.361] (==) Automatically adding GPU devices
[    71.361] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    71.361] 	Entry deleted from font path.
[    71.361] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    71.361] 	Entry deleted from font path.
[    71.361] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    71.361] 	Entry deleted from font path.
[    71.361] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    71.361] 	Entry deleted from font path.
[    71.361] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    71.361] 	Entry deleted from font path.
[    71.361] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    71.361] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    71.361] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    71.362] (II) Loader magic: 0x7fe9f6b6ac60
[    71.362] (II) Module ABI versions:
[    71.362] 	X.Org ANSI C Emulation: 0.4
[    71.362] 	X.Org Video Driver: 19.0
[    71.362] 	X.Org XInput driver : 21.0
[    71.362] 	X.Org Server Extension : 9.0
[    71.362] (II) xfree86: Adding drm device (/dev/dri/card0)
[    71.363] (--) PCI:*(0:0:2:0) 8086:0f31:8086:0f31 rev 14, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00001000/8
[    71.363] (II) LoadModule: "glx"
[    71.364] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    71.366] (II) Module glx: vendor="X.Org Foundation"
[    71.366] 	compiled for 1.17.1, module version = 1.0.0
[    71.366] 	ABI class: X.Org Server Extension, version 9.0
[    71.366] (==) AIGLX enabled
[    71.366] (==) Matched intel as autoconfigured driver 0
[    71.366] (==) Matched intel as autoconfigured driver 1
[    71.366] (==) Matched modesetting as autoconfigured driver 2
[    71.366] (==) Matched fbdev as autoconfigured driver 3
[    71.366] (==) Matched vesa as autoconfigured driver 4
[    71.366] (==) Assigned the driver to the xf86ConfigLayout
[    71.366] (II) LoadModule: "intel"
[    71.366] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    71.367] (II) Module intel: vendor="X.Org Foundation"
[    71.367] 	compiled for 1.17.1, module version = 2.99.917
[    71.367] 	Module class: X.Org Video Driver
[    71.367] 	ABI class: X.Org Video Driver, version 19.0
[    71.367] (II) LoadModule: "modesetting"
[    71.367] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    71.367] (II) Module modesetting: vendor="X.Org Foundation"
[    71.367] 	compiled for 1.17.1, module version = 1.17.1
[    71.367] 	Module class: X.Org Video Driver
[    71.367] 	ABI class: X.Org Video Driver, version 19.0
[    71.367] (II) LoadModule: "fbdev"
[    71.367] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    71.367] (II) Module fbdev: vendor="X.Org Foundation"
[    71.367] 	compiled for 1.17.1, module version = 0.4.4
[    71.367] 	Module class: X.Org Video Driver
[    71.367] 	ABI class: X.Org Video Driver, version 19.0
[    71.367] (II) LoadModule: "vesa"
[    71.368] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    71.368] (II) Module vesa: vendor="X.Org Foundation"
[    71.368] 	compiled for 1.17.1, module version = 2.3.3
[    71.368] 	Module class: X.Org Video Driver
[    71.368] 	ABI class: X.Org Video Driver, version 19.0
[    71.368] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    71.368] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    71.368] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    71.368] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    71.368] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    71.368] (II) FBDEV: driver for framebuffer: fbdev
[    71.368] (II) VESA: driver for VESA chipsets: vesa
[    71.368] (++) using VT number 7

[    71.368] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20141121
[    71.368] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-vivid 2:2.99.917-1~exp1ubuntu2.2~trusty1 (Timo Aaltonen <tjaalton@debian.org>)
[    71.368] (II) intel(0): SNA compiled for use with valgrind
[    71.369] (WW) Falling back to old probe method for modesetting
[    71.369] (WW) Falling back to old probe method for fbdev
[    71.369] (II) Loading sub module "fbdevhw"
[    71.369] (II) LoadModule: "fbdevhw"
[    71.369] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    71.369] (II) Module fbdevhw: vendor="X.Org Foundation"
[    71.369] 	compiled for 1.17.1, module version = 0.0.2
[    71.369] 	ABI class: X.Org Video Driver, version 19.0
[    71.369] (WW) Falling back to old probe method for vesa
[    71.370] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[    71.370] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[    71.370] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    71.370] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    71.370] (==) intel(0): RGB weight 888
[    71.370] (==) intel(0): Default visual is TrueColor
[    71.370] (II) intel(0): Output eDP1 has no monitor section
[    71.370] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    71.370] (II) intel(0): Enabled output eDP1
[    71.370] (II) intel(0): Output HDMI1 has no monitor section
[    71.370] (II) intel(0): Enabled output HDMI1
[    71.370] (II) intel(0): Output DP1 has no monitor section
[    71.370] (II) intel(0): Enabled output DP1
[    71.371] (II) intel(0): Output HDMI2 has no monitor section
[    71.371] (II) intel(0): Enabled output HDMI2
[    71.371] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    71.371] (II) intel(0): Output VIRTUAL1 has no monitor section
[    71.371] (II) intel(0): Enabled output VIRTUAL1
[    71.371] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[    71.371] (==) intel(0): TearFree disabled
[    71.371] (==) intel(0): DPI set to (96, 96)
[    71.371] (II) Loading sub module "dri2"
[    71.371] (II) LoadModule: "dri2"
[    71.371] (II) Module "dri2" already built-in
[    71.371] (II) Loading sub module "present"
[    71.371] (II) LoadModule: "present"
[    71.371] (II) Module "present" already built-in
[    71.371] (II) UnloadModule: "modesetting"
[    71.371] (II) Unloading modesetting
[    71.371] (II) UnloadModule: "fbdev"
[    71.371] (II) Unloading fbdev
[    71.371] (II) UnloadSubModule: "fbdevhw"
[    71.371] (II) Unloading fbdevhw
[    71.371] (II) UnloadModule: "vesa"
[    71.371] (II) Unloading vesa
[    71.371] (==) Depth 24 pixmap format is 32 bpp
[    71.372] (II) intel(0): SNA initialized with Baytrail (gen7) backend
[    71.372] (==) intel(0): Backing store enabled
[    71.372] (==) intel(0): Silken mouse enabled
[    71.372] (II) intel(0): HW Cursor enabled
[    71.372] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    71.372] (==) intel(0): DPMS enabled
[    71.372] (==) intel(0): display hotplug detection enabled
[    71.372] (II) intel(0): [DRI2] Setup complete
[    71.372] (II) intel(0): [DRI2]   DRI driver: i965
[    71.372] (II) intel(0): [DRI2]   VDPAU driver: i965
[    71.373] (II) intel(0): direct rendering: DRI2 enabled
[    71.373] (II) intel(0): hardware support for Present enabled
[    71.373] (--) RandR disabled
[    71.449] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    71.449] (II) AIGLX: enabled GLX_ARB_create_context
[    71.449] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    71.449] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    71.449] (II) AIGLX: enabled GLX_INTEL_swap_event
[    71.449] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    71.449] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    71.449] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    71.449] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    71.449] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    71.449] (II) AIGLX: Loaded and initialized i965
[    71.449] (II) GLX: Initialized DRI2 GL provider for screen 0
[    71.454] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    71.461] (II) intel(0): Setting screen physical size to 361 x 203
[    71.474] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    71.478] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    71.478] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    71.478] (II) LoadModule: "evdev"
[    71.478] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    71.479] (II) Module evdev: vendor="X.Org Foundation"
[    71.479] 	compiled for 1.17.1, module version = 2.9.0
[    71.479] 	Module class: X.Org XInput Driver
[    71.479] 	ABI class: X.Org XInput driver, version 21.0
[    71.479] (II) Using input driver 'evdev' for 'Power Button'
[    71.479] (**) Power Button: always reports core events
[    71.479] (**) evdev: Power Button: Device: "/dev/input/event4"
[    71.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[    71.479] (--) evdev: Power Button: Found keys
[    71.479] (II) evdev: Power Button: Configuring as keyboard
[    71.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    71.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    71.479] (**) Option "xkb_rules" "evdev"
[    71.479] (**) Option "xkb_model" "pc105"
[    71.479] (**) Option "xkb_layout" "us"
[    71.480] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    71.480] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    71.480] (II) Using input driver 'evdev' for 'Power Button'
[    71.480] (**) Power Button: always reports core events
[    71.480] (**) evdev: Power Button: Device: "/dev/input/event1"
[    71.480] (--) evdev: Power Button: Vendor 0 Product 0x1
[    71.480] (--) evdev: Power Button: Found keys
[    71.480] (II) evdev: Power Button: Configuring as keyboard
[    71.480] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    71.480] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    71.480] (**) Option "xkb_rules" "evdev"
[    71.480] (**) Option "xkb_model" "pc105"
[    71.480] (**) Option "xkb_layout" "us"
[    71.481] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    71.481] (II) No input driver specified, ignoring this device.
[    71.481] (II) This device may have been added with another device file.
[    71.481] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    71.481] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    71.481] (II) Using input driver 'evdev' for 'Sleep Button'
[    71.482] (**) Sleep Button: always reports core events
[    71.482] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    71.482] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    71.482] (--) evdev: Sleep Button: Found keys
[    71.482] (II) evdev: Sleep Button: Configuring as keyboard
[    71.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    71.482] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    71.482] (**) Option "xkb_rules" "evdev"
[    71.482] (**) Option "xkb_model" "pc105"
[    71.482] (**) Option "xkb_layout" "us"
[    71.482] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    71.482] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    71.482] (II) Using input driver 'evdev' for 'Sleep Button'
[    71.482] (**) Sleep Button: always reports core events
[    71.482] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    71.482] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    71.482] (--) evdev: Sleep Button: Found keys
[    71.483] (II) evdev: Sleep Button: Configuring as keyboard
[    71.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input3/event3"
[    71.483] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    71.483] (**) Option "xkb_rules" "evdev"
[    71.483] (**) Option "xkb_model" "pc105"
[    71.483] (**) Option "xkb_layout" "us"
[    71.484] (II) config/udev: Adding input device HD WebCam (/dev/input/event7)
[    71.484] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[    71.484] (II) Using input driver 'evdev' for 'HD WebCam'
[    71.484] (**) HD WebCam: always reports core events
[    71.484] (**) evdev: HD WebCam: Device: "/dev/input/event7"
[    71.484] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c67
[    71.484] (--) evdev: HD WebCam: Found keys
[    71.484] (II) evdev: HD WebCam: Configuring as keyboard
[    71.484] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7/event7"
[    71.484] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 10)
[    71.484] (**) Option "xkb_rules" "evdev"
[    71.484] (**) Option "xkb_model" "pc105"
[    71.484] (**) Option "xkb_layout" "us"
[    71.485] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[    71.485] (II) No input driver specified, ignoring this device.
[    71.485] (II) This device may have been added with another device file.
[    71.485] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[    71.485] (II) No input driver specified, ignoring this device.
[    71.485] (II) This device may have been added with another device file.
[    71.486] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event6)
[    71.486] (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall"
[    71.486] (**) Elan Touchpad: Applying InputClass "touchpad catchall"
[    71.486] (**) Elan Touchpad: Applying InputClass "Default clickpad buttons"
[    71.486] (II) LoadModule: "synaptics"
[    71.486] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    71.486] (II) Module synaptics: vendor="X.Org Foundation"
[    71.486] 	compiled for 1.17.1, module version = 1.8.99
[    71.486] 	Module class: X.Org XInput Driver
[    71.486] 	ABI class: X.Org XInput driver, version 21.0
[    71.486] (II) Using input driver 'synaptics' for 'Elan Touchpad'
[    71.486] (**) Elan Touchpad: always reports core events
[    71.486] (**) Option "Device" "/dev/input/event6"
[    71.496] (II) synaptics: Elan Touchpad: found clickpad property
[    71.496] (--) synaptics: Elan Touchpad: x-axis range 0 - 3207 (res 31)
[    71.497] (--) synaptics: Elan Touchpad: y-axis range 0 - 1791 (res 31)
[    71.497] (--) synaptics: Elan Touchpad: pressure range 0 - 255
[    71.497] (--) synaptics: Elan Touchpad: finger width range 0 - 15
[    71.497] (--) synaptics: Elan Touchpad: buttons: left double triple
[    71.497] (--) synaptics: Elan Touchpad: Vendor 0 Product 0
[    71.497] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    71.497] (--) synaptics: Elan Touchpad: touchpad found
[    71.497] (**) Elan Touchpad: always reports core events
[    71.508] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:00/i2c-8/i2c-ELAN0000:00/input/input6/event6"
[    71.508] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 11)
[    71.508] (**) synaptics: Elan Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    71.508] (**) synaptics: Elan Touchpad: (accel) MaxSpeed is now 1.75
[    71.508] (**) synaptics: Elan Touchpad: (accel) AccelFactor is now 0.054
[    71.509] (**) Elan Touchpad: (accel) keeping acceleration scheme 1
[    71.509] (**) Elan Touchpad: (accel) acceleration profile 1
[    71.509] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[    71.509] (**) Elan Touchpad: (accel) acceleration threshold: 4
[    71.509] (--) synaptics: Elan Touchpad: touchpad found
[    71.509] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[    71.509] (**) Elan Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    71.510] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    71.510] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    71.510] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    71.510] (**) AT Translated Set 2 keyboard: always reports core events
[    71.510] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[    71.510] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    71.510] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    71.510] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    71.510] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    71.510] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    71.510] (**) Option "xkb_rules" "evdev"
[    71.510] (**) Option "xkb_model" "pc105"
[    71.510] (**) Option "xkb_layout" "us"
[    73.281] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    79.010] (II) intel(0): EDID vendor "CMN", prod id 4402
[    79.010] (II) intel(0): Printing DDC gathered Modelines:
[    79.010] (II) intel(0): Modeline "1366x768"x0.0   76.42  1366 1502 1532 1592  768 776 788 800 -hsync -vsync (48.0 kHz eP)
[    79.931] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    79.992] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.062] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.110] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.157] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.197] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.244] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.274] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    83.889] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[   525.043] (II) config/udev: Adding input device Logitech T400 (/dev/input/mouse1)
[   525.043] (II) No input driver specified, ignoring this device.
[   525.043] (II) This device may have been added with another device file.
[   525.061] (II) config/udev: Adding input device Logitech T400 (/dev/input/event10)
[   525.061] (**) Logitech T400: Applying InputClass "evdev pointer catchall"
[   525.061] (**) Logitech T400: Applying InputClass "evdev keyboard catchall"
[   525.061] (II) Using input driver 'evdev' for 'Logitech T400'
[   525.061] (**) Logitech T400: always reports core events
[   525.061] (**) evdev: Logitech T400: Device: "/dev/input/event10"
[   525.061] (--) evdev: Logitech T400: Vendor 0x46d Product 0x4026
[   525.061] (--) evdev: Logitech T400: Found 20 mouse buttons
[   525.061] (--) evdev: Logitech T400: Found scroll wheel(s)
[   525.061] (--) evdev: Logitech T400: Found relative axes
[   525.061] (--) evdev: Logitech T400: Found x and y relative axes
[   525.061] (--) evdev: Logitech T400: Found absolute axes
[   525.061] (II) evdev: Logitech T400: Forcing absolute x/y axes to exist.
[   525.061] (--) evdev: Logitech T400: Found keys
[   525.061] (II) evdev: Logitech T400: Configuring as mouse
[   525.061] (II) evdev: Logitech T400: Configuring as keyboard
[   525.061] (II) evdev: Logitech T400: Adding scrollwheel support
[   525.061] (**) evdev: Logitech T400: YAxisMapping: buttons 4 and 5
[   525.061] (**) evdev: Logitech T400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   525.062] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4026.0004/input/input10/event10"
[   525.062] (II) XINPUT: Adding extended input device "Logitech T400" (type: KEYBOARD, id 13)
[   525.062] (**) Option "xkb_rules" "evdev"
[   525.062] (**) Option "xkb_model" "pc105"
[   525.062] (**) Option "xkb_layout" "us"
[   525.066] (II) evdev: Logitech T400: initialized for relative axes.
[   525.066] (WW) evdev: Logitech T400: ignoring absolute axes.
[   525.066] (**) Logitech T400: (accel) keeping acceleration scheme 1
[   525.066] (**) Logitech T400: (accel) acceleration profile 0
[   525.066] (**) Logitech T400: (accel) acceleration factor: 2.000
[   525.066] (**) Logitech T400: (accel) acceleration threshold: 4

twix · 2015-09-06 22:33:28

My touchpad stopped working in graphical sessions a few days ago too on my Dell Latitude 3540.
What's weird is that in GDM and gnome-shell in wayland mode it is working, while openbox and gnome-shell are not.

The problem is not related to kernel version (both LTS and "classic" are not working correctly)

xorg-server 1.17.2-4
xf86-input-evdev 2.9.2-1
xf86-input-libinput 0.14.0-3
xf86-input-synaptics 1.8.2-2
libinput 1.0.1-1
libevdev 1.4.4-1

% synclient 
 Couldn't find synaptics properties. No synaptics driver loaded?

[    63.978] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    63.978] X Protocol Version 11, Revision 0
[    63.978] Build Operating System: Linux 4.0.4-2-ARCH x86_64 
[    63.978] Current Operating System: Linux haswell 4.1.6-1-ARCH #1 SMP PREEMPT Mon Aug 17 08:52:28 CEST 2015 x86_64
[    63.978] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f47a52fc-99e7-4d6c-9c95-746dbdcb18e3 rw rootflags=subvol=rootvol quiet cryptdevice=UUID=84277ef0-57fd-48ea-bc3b-b1919ff1bad7:root:allow-discards rootflags=subvol=rootvol,noatime,discard,ssd,autodefrag,compress=lzo,space_cache elevator=deadline pcie_aspm=force rw
[    63.979] Build Date: 17 July 2015  05:38:19PM
[    63.979]  
[    63.979] Current version of pixman: 0.32.6
[    63.979] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    63.979] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep  6 10:36:54 2015
[    63.979] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    63.979] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    63.979] (==) No Layout section.  Using the first Screen section.
[    63.979] (==) No screen section available. Using defaults.
[    63.979] (**) |-->Screen "Default Screen Section" (0)
[    63.979] (**) |   |-->Monitor "<default monitor>"
[    63.979] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    63.979] (==) Automatically adding devices
[    63.979] (==) Automatically enabling devices
[    63.979] (==) Automatically adding GPU devices
[    63.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    63.979] 	Entry deleted from font path.
[    63.979] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    63.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    63.979] 	Entry deleted from font path.
[    63.979] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    63.979] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    63.979] (==) ModulePath set to "/usr/lib/xorg/modules"
[    63.980] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    63.980] (II) Loader magic: 0x817d60
[    63.980] (II) Module ABI versions:
[    63.980] 	X.Org ANSI C Emulation: 0.4
[    63.980] 	X.Org Video Driver: 19.0
[    63.980] 	X.Org XInput driver : 21.1
[    63.980] 	X.Org Server Extension : 9.0
[    63.983] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[    63.987] (II) xfree86: Adding drm device (/dev/dri/card0)
[    63.987] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[    63.988] (II) xfree86: Adding drm device (/dev/dri/card1)
[    63.988] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[    63.989] (--) PCI:*(0:0:2:0) 8086:0a16:1028:0609 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[    63.989] (--) PCI: (0:3:0:0) 1002:6823:1028:0609 rev 0, Mem @ 0xd0000000/268435456, 0xf0500000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    63.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    63.989] (II) LoadModule: "glx"
[    63.990] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    63.992] (II) Module glx: vendor="X.Org Foundation"
[    63.992] 	compiled for 1.17.2, module version = 1.0.0
[    63.992] 	ABI class: X.Org Server Extension, version 9.0
[    63.992] (==) AIGLX enabled
[    63.992] (==) Matched intel as autoconfigured driver 0
[    63.992] (==) Matched ati as autoconfigured driver 1
[    63.992] (==) Matched intel as autoconfigured driver 2
[    63.992] (==) Matched modesetting as autoconfigured driver 3
[    63.992] (==) Matched fbdev as autoconfigured driver 4
[    63.992] (==) Matched vesa as autoconfigured driver 5
[    63.992] (==) Assigned the driver to the xf86ConfigLayout
[    63.992] (II) LoadModule: "intel"
[    63.992] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    63.997] (II) Module intel: vendor="X.Org Foundation"
[    63.997] 	compiled for 1.17.2, module version = 2.99.917
[    63.997] 	Module class: X.Org Video Driver
[    63.997] 	ABI class: X.Org Video Driver, version 19.0
[    63.997] (II) LoadModule: "ati"
[    63.997] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    63.998] (II) Module ati: vendor="X.Org Foundation"
[    63.998] 	compiled for 1.17.0, module version = 7.5.0
[    63.998] 	Module class: X.Org Video Driver
[    63.998] 	ABI class: X.Org Video Driver, version 19.0
[    63.998] (II) LoadModule: "radeon"
[    63.998] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    64.000] (II) Module radeon: vendor="X.Org Foundation"
[    64.000] 	compiled for 1.17.0, module version = 7.5.0
[    64.000] 	Module class: X.Org Video Driver
[    64.000] 	ABI class: X.Org Video Driver, version 19.0
[    64.000] (II) LoadModule: "modesetting"
[    64.000] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    64.001] (II) Module modesetting: vendor="X.Org Foundation"
[    64.001] 	compiled for 1.17.2, module version = 1.17.2
[    64.001] 	Module class: X.Org Video Driver
[    64.001] 	ABI class: X.Org Video Driver, version 19.0
[    64.001] (II) LoadModule: "fbdev"
[    64.002] (WW) Warning, couldn't open module fbdev
[    64.002] (II) UnloadModule: "fbdev"
[    64.002] (II) Unloading fbdev
[    64.002] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    64.002] (II) LoadModule: "vesa"
[    64.002] (WW) Warning, couldn't open module vesa
[    64.002] (II) UnloadModule: "vesa"
[    64.002] (II) Unloading vesa
[    64.002] (EE) Failed to load module "vesa" (module does not exist, 0)
[    64.002] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    64.002] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    64.002] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    64.002] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    64.002] (II) RADEON: Driver for ATI Radeon chipsets:
[    64.035] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    64.035] (++) using VT number 2

[    64.035] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[    64.035] (II) intel(0): SNA compiled from 2.99.917-381-g5772556
[    64.036] (II) [KMS] Kernel modesetting enabled.
[    64.036] (WW) Falling back to old probe method for modesetting
[    64.036] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    64.036] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    64.036] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    64.036] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    64.036] (==) intel(0): RGB weight 888
[    64.036] (==) intel(0): Default visual is TrueColor
[    64.036] (II) intel(0): Output eDP1 has no monitor section
[    64.037] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    64.037] (II) intel(0): Enabled output eDP1
[    64.037] (II) intel(0): Output DP1 has no monitor section
[    64.037] (II) intel(0): Enabled output DP1
[    64.037] (II) intel(0): Output DP2 has no monitor section
[    64.037] (II) intel(0): Enabled output DP2
[    64.037] (II) intel(0): Output HDMI1 has no monitor section
[    64.037] (II) intel(0): Enabled output HDMI1
[    64.037] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    64.037] (II) intel(0): Output VIRTUAL1 has no monitor section
[    64.037] (II) intel(0): Enabled output VIRTUAL1
[    64.037] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    64.037] (==) intel(0): TearFree disabled
[    64.037] (==) intel(0): DPI set to (96, 96)
[    64.037] (II) Loading sub module "dri2"
[    64.037] (II) LoadModule: "dri2"
[    64.037] (II) Module "dri2" already built-in
[    64.037] (II) Loading sub module "present"
[    64.037] (II) LoadModule: "present"
[    64.037] (II) Module "present" already built-in
[    64.037] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[    64.037] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    64.037] (==) RADEON(G0): Default visual is TrueColor
[    64.037] (==) RADEON(G0): RGB weight 888
[    64.037] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[    64.037] (--) RADEON(G0): Chipset: "VERDE" (ChipID = 0x6823)
[    64.037] (II) Loading sub module "dri2"
[    64.037] (II) LoadModule: "dri2"
[    64.037] (II) Module "dri2" already built-in
[    64.037] (II) Loading sub module "glamoregl"
[    64.037] (II) LoadModule: "glamoregl"
[    64.037] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    64.043] (II) Module glamoregl: vendor="X.Org Foundation"
[    64.043] 	compiled for 1.17.2, module version = 1.0.0
[    64.043] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    64.043] (II) glamor: OpenGL accelerated X.org driver based.
[    64.071] (II) glamor: EGL version 1.4 (DRI2):
[    64.074] (II) RADEON(G0): glamor detected, initialising EGL layer.
[    64.074] (II) RADEON(G0): KMS Color Tiling: enabled
[    64.074] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[    64.074] (II) RADEON(G0): KMS Pageflipping: enabled
[    64.074] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[    64.074] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    64.074] (II) RADEON(G0): mem size init: gart size :3fbce000 vram size: s:80000000 visible:7f886000
[    64.074] (==) RADEON(G0): DPI set to (96, 96)
[    64.074] (II) Loading sub module "fb"
[    64.074] (II) LoadModule: "fb"
[    64.074] (II) Loading /usr/lib/xorg/modules/libfb.so
[    64.075] (II) Module fb: vendor="X.Org Foundation"
[    64.075] 	compiled for 1.17.2, module version = 1.0.0
[    64.075] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    64.075] (II) Loading sub module "ramdac"
[    64.075] (II) LoadModule: "ramdac"
[    64.075] (II) Module "ramdac" already built-in
[    64.075] (II) UnloadModule: "modesetting"
[    64.075] (II) Unloading modesetting
[    64.075] (==) Depth 24 pixmap format is 32 bpp
[    64.075] (II) RADEON(G0): [DRI2] Setup complete
[    64.075] (II) RADEON(G0): [DRI2]   DRI driver: radeonsi
[    64.075] (II) RADEON(G0): [DRI2]   VDPAU driver: radeonsi
[    64.075] (II) RADEON(G0): Front buffer size: 3072K
[    64.075] (II) RADEON(G0): VRAM usage limit set to 1877695K
[    64.076] (==) RADEON(G0): Backing store enabled
[    64.076] (II) RADEON(G0): Direct rendering enabled
[    64.117] (II) RADEON(G0): Use GLAMOR acceleration.
[    64.117] (II) RADEON(G0): Acceleration enabled
[    64.117] (==) RADEON(G0): DPMS enabled
[    64.117] (==) RADEON(G0): Silken mouse enabled
[    64.117] (II) RADEON(G0): Set up textured video (glamor)
[    64.117] (II) RADEON(G0): [XvMC] Associated with GLAMOR Textured Video.
[    64.117] (II) RADEON(G0): [XvMC] Extension initialized.
[    64.117] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    64.118] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    64.118] (==) intel(0): Backing store enabled
[    64.118] (==) intel(0): Silken mouse enabled
[    64.118] (II) intel(0): HW Cursor enabled
[    64.118] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    64.118] (==) intel(0): DPMS enabled
[    64.118] (==) intel(0): Display hotplug detection enabled
[    64.118] (II) intel(0): [DRI2] Setup complete
[    64.118] (II) intel(0): [DRI2]   DRI driver: i965
[    64.118] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    64.118] (II) intel(0): direct rendering: DRI2 enabled
[    64.118] (II) intel(0): hardware support for Present enabled
[    64.118] (--) RandR disabled
[    64.148] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    64.149] (II) AIGLX: enabled GLX_ARB_create_context
[    64.149] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    64.149] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    64.149] (II) AIGLX: enabled GLX_INTEL_swap_event
[    64.149] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    64.149] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    64.149] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    64.149] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    64.149] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    64.149] (II) AIGLX: Loaded and initialized i965
[    64.149] (II) GLX: Initialized DRI2 GL provider for screen 0
[    64.171] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    64.171] (II) intel(0): Setting screen physical size to 508 x 285
[    64.199] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    64.199] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    64.199] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    64.199] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    64.199] (II) LoadModule: "evdev"
[    64.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    64.201] (II) Module evdev: vendor="X.Org Foundation"
[    64.201] 	compiled for 1.17.1, module version = 2.9.2
[    64.201] 	Module class: X.Org XInput Driver
[    64.201] 	ABI class: X.Org XInput driver, version 21.0
[    64.201] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    64.201] (II) Using input driver 'evdev' for 'Power Button'
[    64.201] (**) Power Button: always reports core events
[    64.201] (**) evdev: Power Button: Device: "/dev/input/event2"
[    64.201] (--) evdev: Power Button: Vendor 0 Product 0x1
[    64.201] (--) evdev: Power Button: Found keys
[    64.201] (II) evdev: Power Button: Configuring as keyboard
[    64.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    64.201] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    64.201] (**) Option "xkb_rules" "evdev"
[    64.201] (**) Option "xkb_model" "pc104"
[    64.201] (**) Option "xkb_layout" "fr"
[    64.218] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    64.218] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    64.218] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    64.218] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    64.219] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 21 paused 0
[    64.219] (II) Using input driver 'evdev' for 'Video Bus'
[    64.219] (**) Video Bus: always reports core events
[    64.219] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    64.219] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    64.219] (--) evdev: Video Bus: Found keys
[    64.219] (II) evdev: Video Bus: Configuring as keyboard
[    64.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[    64.219] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    64.219] (**) Option "xkb_rules" "evdev"
[    64.219] (**) Option "xkb_model" "pc104"
[    64.219] (**) Option "xkb_layout" "fr"
[    64.220] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    64.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    64.220] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    64.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    64.220] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[    64.220] (II) Using input driver 'evdev' for 'Power Button'
[    64.220] (**) Power Button: always reports core events
[    64.220] (**) evdev: Power Button: Device: "/dev/input/event1"
[    64.220] (--) evdev: Power Button: Vendor 0 Product 0x1
[    64.220] (--) evdev: Power Button: Found keys
[    64.220] (II) evdev: Power Button: Configuring as keyboard
[    64.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1/event1"
[    64.221] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    64.221] (**) Option "xkb_rules" "evdev"
[    64.221] (**) Option "xkb_model" "pc104"
[    64.221] (**) Option "xkb_layout" "fr"
[    64.221] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    64.221] (II) No input driver specified, ignoring this device.
[    64.221] (II) This device may have been added with another device file.
[    64.222] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    64.222] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    64.222] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    64.222] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    64.222] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 23 paused 0
[    64.222] (II) Using input driver 'evdev' for 'Video Bus'
[    64.222] (**) Video Bus: always reports core events
[    64.222] (**) evdev: Video Bus: Device: "/dev/input/event3"
[    64.222] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    64.222] (--) evdev: Video Bus: Found keys
[    64.222] (II) evdev: Video Bus: Configuring as keyboard
[    64.222] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input3/event3"
[    64.222] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    64.222] (**) Option "xkb_rules" "evdev"
[    64.222] (**) Option "xkb_model" "pc104"
[    64.222] (**) Option "xkb_layout" "fr"
[    64.224] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event9)
[    64.224] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    64.224] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    64.224] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    64.224] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 24 paused 0
[    64.224] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    64.224] (**) Logitech USB Optical Mouse: always reports core events
[    64.224] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event9"
[    64.224] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[    64.224] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    64.224] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    64.224] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    64.224] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    64.224] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    64.224] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    64.224] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    64.224] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    64.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0001/input/input11/event9"
[    64.224] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    64.224] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    64.225] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    64.225] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    64.225] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    64.225] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    64.225] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    64.225] (II) No input driver specified, ignoring this device.
[    64.225] (II) This device may have been added with another device file.
[    64.225] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event7)
[    64.226] (II) No input driver specified, ignoring this device.
[    64.226] (II) This device may have been added with another device file.
[    64.226] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event11)
[    64.226] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    64.226] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[    64.226] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    64.227] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 25 paused 0
[    64.227] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    64.227] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    64.227] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event11"
[    64.227] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0x64e Product 0x8132
[    64.227] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    64.227] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    64.227] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/input/input12/event11"
[    64.227] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    64.227] (**) Option "xkb_rules" "evdev"
[    64.227] (**) Option "xkb_model" "pc104"
[    64.227] (**) Option "xkb_layout" "fr"
[    64.228] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    64.228] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    64.228] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    64.228] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    64.228] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[    64.228] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    64.228] (**) AT Translated Set 2 keyboard: always reports core events
[    64.228] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[    64.229] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    64.229] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    64.229] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    64.229] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    64.229] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    64.229] (**) Option "xkb_rules" "evdev"
[    64.229] (**) Option "xkb_model" "pc104"
[    64.229] (**) Option "xkb_layout" "fr"
[    64.229] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    64.230] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 27 paused 0
[    64.230] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[    64.230] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    64.230] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    64.230] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[    64.230] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    64.230] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    64.231] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    64.231] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    64.231] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    64.231] (II) No input driver specified, ignoring this device.
[    64.231] (II) This device may have been added with another device file.
[    64.232] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[    64.232] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.232] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    64.232] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.232] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 28 paused 0
[    64.232] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    64.232] (**) Dell WMI hotkeys: always reports core events
[    64.232] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[    64.232] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    64.232] (--) evdev: Dell WMI hotkeys: Found keys
[    64.232] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    64.232] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[    64.232] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    64.232] (**) Option "xkb_rules" "evdev"
[    64.232] (**) Option "xkb_model" "pc104"
[    64.232] (**) Option "xkb_layout" "fr"
[    64.766] (II) intel(0): EDID vendor "AUO", prod id 8685
[    64.766] (II) intel(0): Printing DDC gathered Modelines:
[    64.766] (II) intel(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2068 2100  1080 1083 1084 1110 +hsync -vsync (66.7 kHz eP)

Maybe related package upgrades :

[2015-09-04 22:29] [ALPM] upgraded libevdev (1.4.3-1 -> 1.4.4-1)
[2015-09-04 22:29] [ALPM] upgraded libinput (1.0.0-1 -> 1.0.1-1)
[2015-09-05 12:59] [ALPM] upgraded hwids (20150129-1 -> 20150717-1)

EDIT : rolled back to libevdev 1.4.3-1 and libinput 0.21.0-2, didn't help

Last edited by twix (2015-09-06 22:54:50)

dioib · 2015-09-06 23:09:20

Thank you; I was behind on

xf86-input-libinput 0.14.0-3
libinput 1.0.1-1

But the problem persists after update.

loqs · 2015-09-06 23:15:24

dioib can you post the output of dmesg from both arch and ubuntu please.

dioib · 2015-09-06 23:47:42

loqs, sure here is the one from Arch:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.51-1-lts (builduser@andyrtr) (gcc version 5.2.0 (GCC) ) #1 SMP Mon Aug 17 19:21:08 CEST 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mmcblk0p1 rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000007ae5bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ae5c000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000febfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed05000-0x00000000fed05fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: GOOGLE Gnawty, BIOS          08/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ae5c max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 060000000 mask FF0000000 write-back
[    0.000000]   3 base 070000000 mask FF8000000 write-back
[    0.000000]   4 base 078000000 mask FFC000000 write-back
[    0.000000]   5 base 07B800000 mask FFF800000 uncachable
[    0.000000]   6 base 0FF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[    0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7ac00000-0x7adfffff]
[    0.000000]  [mem 0x7ac00000-0x7adfffff] page 2M
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78000000-0x7abfffff]
[    0.000000]  [mem 0x78000000-0x7abfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
[    0.000000]  [mem 0x20100000-0x201fffff] page 4k
[    0.000000]  [mem 0x20200000-0x77ffffff] page 2M
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7ae00000-0x7ae5bfff]
[    0.000000]  [mem 0x7ae00000-0x7ae5bfff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3796e000-0x37caefff]
[    0.000000] ACPI: RSDP 0x00000000000F3750 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007AF780E0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007AF7C540 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 0x000000007AF78250 0042EA (v05 COREv4 COREBOOT 20110725 INTL 20130117)
[    0.000000] ACPI: FACS 0x000000007AF78210 000040
[    0.000000] ACPI: HPET 0x000000007AF7C640 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007AF7C680 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 0x000000007AF7C6E0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x000000007AF7D7D0 000810 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ae5bfff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7ae5bfff]
[    0.000000]   NODE_DATA [mem 0x7ae57000-0x7ae5bfff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880078600000-ffff88007a5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20100000-0x7ae5bfff]
[    0.000000] On node 0 totalpages: 503034
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7802 pages used for memmap
[    0.000000]   DMA32 zone: 499036 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 103
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007ac00000 s80576 r8192 d21824 u1048576
[    0.000000] pcpu-alloc: s80576 r8192 d21824 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 495147
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mmcblk0p1 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1963992K/2012136K available (5205K kernel code, 803K rwdata, 1628K rodata, 1120K init, 1296K bss, 48144K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 2163200 KHz
[    0.000000] lapic_timer_frequency = 832000
[    0.000000] tsc: Detected 2163.200 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=21632000)
[    0.000041] pid_max: default: 32768 minimum: 301
[    0.000056] ACPI: Core revision 20131218
[    0.004671] ACPI: All ACPI Tables successfully acquired
[    0.004715] Security Framework initialized
[    0.004724] Yama: becoming mindful.
[    0.004956] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005859] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.006291] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006301] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006604] Initializing cgroup subsys memory
[    0.006615] Initializing cgroup subsys devices
[    0.006619] Initializing cgroup subsys freezer
[    0.006622] Initializing cgroup subsys net_cls
[    0.006625] Initializing cgroup subsys blkio
[    0.006657] CPU: Physical Processor ID: 0
[    0.006660] CPU: Processor Core ID: 0
[    0.006666] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.011407] mce: CPU supports 6 MCE banks
[    0.011418] CPU0: Thermal monitoring enabled (TM1)
[    0.011423] process: using mwait in idle threads
[    0.011430] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
               tlb_flushall_shift: 6
[    0.011543] Freeing SMP alternatives memory: 20K (ffffffff819e2000 - ffffffff819e7000)
[    0.014536] ftrace: allocating 20041 entries in 79 pages
[    0.026131] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.126065] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2830  @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[    0.126078] TSC deadline timer enabled
[    0.126094] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.126109] ... version:                3
[    0.126111] ... bit width:              40
[    0.126113] ... generic registers:      2
[    0.126115] ... value mask:             000000ffffffffff
[    0.126117] ... max period:             000000ffffffffff
[    0.126119] ... fixed-purpose events:   3
[    0.126121] ... event mask:             0000000700000003
[    0.128150] x86: Booting SMP configuration:
[    0.128156] .... node  #0, CPUs:      #1
[    0.146038] x86: Booted up 1 node, 2 CPUs
[    0.146045] smpboot: Total of 2 processors activated (8652.80 BogoMIPS)
[    0.146366] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.146680] devtmpfs: initialized
[    0.154341] pinctrl core: initialized pinctrl subsystem
[    0.154403] RTC time: 23:05:23, date: 09/06/15
[    0.154465] NET: Registered protocol family 16
[    0.154635] cpuidle: using governor ladder
[    0.154639] cpuidle: using governor menu
[    0.154664] ACPI: bus type PCI registered
[    0.154668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154761] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.154765] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.155459] PCI: Using configuration type 1 for base access
[    0.156670] bio: create slab <bio-0> at 0
[    0.156860] ACPI: Added _OSI(Module Device)
[    0.156863] ACPI: Added _OSI(Processor Device)
[    0.156866] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156868] ACPI: Added _OSI(Processor Aggregator Device)
[    0.286000] ACPI: Interpreter enabled
[    0.286011] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.286018] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.286042] ACPI: (supports S0 S3 S4 S5)
[    0.286045] ACPI: Using IOAPIC for interrupt routing
[    0.286087] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.286279] ACPI: No dock devices found.
[    0.319467] ACPI: Power Resource [PLPE] (on)
[    0.347842] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.347852] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.347937] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.348105] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000a0000-0x000bffff] ignored
[    0.348110] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c0000-0x000c3fff] ignored
[    0.348114] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c4000-0x000c7fff] ignored
[    0.348119] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c8000-0x000cbfff] ignored
[    0.348123] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000cc000-0x000cffff] ignored
[    0.348127] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d0000-0x000d3fff] ignored
[    0.348131] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d4000-0x000d7fff] ignored
[    0.348135] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d8000-0x000dbfff] ignored
[    0.348139] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000dc000-0x000dffff] ignored
[    0.348143] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e0000-0x000e3fff] ignored
[    0.348147] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e4000-0x000e7fff] ignored
[    0.348151] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e8000-0x000ebfff] ignored
[    0.348155] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000ec000-0x000effff] ignored
[    0.348159] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000f0000-0x000fffff] ignored
[    0.348263] PCI host bridge to bus 0000:00
[    0.348269] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.348273] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.348277] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.348280] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfeafffff]
[    0.348284] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.348296] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.348407] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.348423] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.348436] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.348448] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.348575] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.348596] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit]
[    0.348656] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.348693] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.348780] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.348809] pci 0000:00:1a.0: reg 0x10: [mem 0xd0600000-0xd06fffff]
[    0.348823] pci 0000:00:1a.0: reg 0x14: [mem 0xd0700000-0xd07fffff]
[    0.348932] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.349029] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.349054] pci 0000:00:1b.0: reg 0x10: [mem 0xd0914000-0xd0917fff 64bit]
[    0.349126] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.349218] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.349281] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.349379] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.349627] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[    0.349674] pci 0000:01:00.0: reg 0x10: [mem 0xd0800000-0xd0801fff 64bit]
[    0.349877] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.375942] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.375950] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.376076] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.376182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.376288] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.376399] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.376503] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.376607] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.376711] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.376815] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.466153] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.466326] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.466331] vgaarb: loaded
[    0.466333] vgaarb: bridge control possible 0000:00:02.0
[    0.466380] PCI: Using ACPI for IRQ routing
[    0.472266] PCI: pci_cache_line_size set to 64 bytes
[    0.472314] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.472318] e820: reserve RAM buffer [mem 0x7ae5c000-0x7bffffff]
[    0.472478] NetLabel: Initializing
[    0.472482] NetLabel:  domain hash size = 128
[    0.472483] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.472505] NetLabel:  unlabeled traffic allowed by default
[    0.472530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.472537] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.474571] Switched to clocksource hpet
[    0.482571] pnp: PnP ACPI init
[    0.482602] ACPI: bus type PNP registered
[    0.482741] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.482748] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.482752] system 00:00: [mem 0xfed03000-0xfed033ff] has been reserved
[    0.482756] system 00:00: [mem 0xfed08000-0xfed083ff] has been reserved
[    0.482760] system 00:00: [mem 0xfed01000-0xfed013ff] has been reserved
[    0.482764] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.482769] system 00:00: [mem 0xfed05000-0xfed057ff] has been reserved
[    0.482773] system 00:00: [mem 0xfed1c000-0xfed1c3ff] has been reserved
[    0.482779] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482862] pnp 00:01: Plug and Play ACPI device, IDs INT33bd (active)
[    0.483120] pnp 00:02: [dma 4]
[    0.483158] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.483210] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.483282] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.483288] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.483368] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.483417] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.483496] system 00:07: [io  0x0900-0x09fe] has been reserved
[    0.483502] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.483576] system 00:08: [io  0x0200] has been reserved
[    0.483582] system 00:08: [io  0x0204] has been reserved
[    0.483586] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.483590] system 00:08: [io  0x0880-0x08ff] has been reserved
[    0.483595] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.483673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.504685] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.504796] pnp 00:0b: Plug and Play ACPI device, IDs INT33fc (active)
[    0.504898] pnp 00:0c: Plug and Play ACPI device, IDs INT33fc (active)
[    0.504992] pnp 00:0d: Plug and Play ACPI device, IDs INT33fc (active)
[    0.594745] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c0e (active)
[    0.594831] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c0e (active)
[    0.594857] pnp: PnP ACPI: found 16 devices
[    0.594860] ACPI: bus type PNP unregistered
[    0.603547] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.603556] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.603566] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.603569] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.603573] pci_bus 0000:00: resource 6 [mem 0x00000000-0xfeafffff]
[    0.603576] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff]
[    0.603580] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[    0.603623] NET: Registered protocol family 2
[    0.603924] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.603997] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.604074] TCP: Hash tables configured (established 16384 bind 16384)
[    0.604121] TCP: reno registered
[    0.604130] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604151] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.604239] NET: Registered protocol family 1
[    0.604261] pci 0000:00:02.0: Boot video device
[    0.605209] PCI: CLS 64 bytes, default 64
[    0.605290] Unpacking initramfs...
[    0.692281] Freeing initrd memory: 3332K (ffff88003796e000 - ffff880037caf000)
[    0.692523] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x829
[    0.692532] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x829
[    0.692637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.692671] Scanning for low memory corruption every 60 seconds
[    0.693041] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.709519] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.712066] zbud: loaded
[    0.712291] VFS: Disk quotas dquot_6.5.2
[    0.712371] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.712593] msgmni has been set to 3842
[    0.712686] Key type big_key registered
[    0.712897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.712950] io scheduler noop registered
[    0.712953] io scheduler deadline registered (default)
[    0.713008] io scheduler cfq registered
[    0.713084] pcieport 0000:00:1c.0: device [8086:0f48] has invalid IRQ; check vendor BIOS
[    0.713560] pcieport 0000:00:1c.0: irq 103 for MSI/MSI-X
[    0.713709] aer 0000:00:1c.0:pcie02: service driver aer loaded
[    0.713736] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.713741] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.713746] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.713772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.713800] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.713862] efifb: probing for efifb
[    0.713870] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[    0.713873] efifb: mode is 640x480x1, linelength=80, pages=1
[    0.713874] efifb: scrolling: redraw
[    0.713878] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.716380] Console: switching to colour frame buffer device 80x30
[    0.718730] fb0: EFI VGA frame buffer device
[    0.718744] intel_idle: does not run on family 6 model 55
[    0.718777] GHES: HEST is not enabled!
[    0.718858] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.739204] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.739706] Linux agpgart interface v0.103
[    0.739780] rtc_cmos 00:06: RTC can wake from S4
[    0.739931] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.739964] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.739982] Intel P-state driver initializing.
[    0.740003] Intel pstate controlling: cpu 0
[    0.740037] Intel pstate controlling: cpu 1
[    0.740145] ledtrig-cpu: registered to indicate activity on CPUs
[    0.740963] TCP: cubic registered
[    0.741737] NET: Registered protocol family 10
[    0.742804] NET: Registered protocol family 17
[    0.744323] registered taskstats version 1
[    0.745125]   Magic number: 15:422:99
[    0.745248] rtc_cmos 00:06: setting system clock to 2015-09-06 23:05:24 UTC (1441580724)
[    0.745357] PM: Hibernation image not present or could not be loaded.
[    0.747052] Freeing unused kernel memory: 1120K (ffffffff818ca000 - ffffffff819e2000)
[    0.747058] Write protecting the kernel read-only data: 8192k
[    0.750539] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    0.752200] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[    0.763091] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.819636] ACPI: bus type USB registered
[    0.819692] usbcore: registered new interface driver usbfs
[    0.819712] usbcore: registered new interface driver hub
[    0.822051] usbcore: registered new device driver usb
[    0.823586] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.823601] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.823999] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.824031] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X
[    0.825560] sdhci: Secure Digital Host Controller Interface driver
[    0.825564] sdhci: Copyright(c) Pierre Ossman
[    0.828065] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    0.830356] mmc1: SDHCI controller on ACPI [80860F16:00] using ADMA
[    0.830634] hub 1-0:1.0: USB hub found
[    0.830655] hub 1-0:1.0: 6 ports detected
[    0.831032] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.831040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.831383] hub 2-0:1.0: USB hub found
[    0.831403] hub 2-0:1.0: 1 port detected
[    0.836482] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 53
[    0.836487] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.837005] i8042: Warning: Keylock active
[    0.837152] serio: i8042 KBD port at 0x60,0x64 irq 53
[    0.940506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.990112] mmc0: BKOPS_EN bit is not set
[    1.078811] mmc0: new HS200 MMC card at address 0001
[    1.080669] mmcblk0: mmc0:0001 HAG2e 14.6 GiB 
[    1.080751] mmcblk0boot0: mmc0:0001 HAG2e partition 1 4.00 MiB
[    1.080822] mmcblk0boot1: mmc0:0001 HAG2e partition 2 4.00 MiB
[    1.080896] mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB
[    1.082076]  mmcblk0: p1
[    1.087882]  mmcblk0boot1: unknown partition table
[    1.093461]  mmcblk0boot0: unknown partition table
[    1.145160] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.595629] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.660596] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    1.685612] tsc: Refined TSC clocksource calibration: 2166.667 MHz
[    1.778464] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.784533] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    1.784752] systemd[1]: Detected architecture x86-64.
[    1.785006] systemd[1]: Set hostname to <acer>.
[    1.881227] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    1.882120] systemd[1]: Created slice Root Slice.
[    1.882192] systemd[1]: Reached target Encrypted Volumes.
[    1.882266] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.882349] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.882427] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.882453] systemd[1]: Reached target Paths.
[    1.882511] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.882537] systemd[1]: Reached target Swap.
[    1.882589] systemd[1]: Listening on udev Kernel Socket.
[    1.882781] systemd[1]: Created slice User and Session Slice.
[    1.882994] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.883067] systemd[1]: Listening on Journal Socket.
[    1.883129] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.883155] systemd[1]: Reached target Remote File Systems.
[    1.883409] systemd[1]: Created slice System Slice.
[    1.883592] systemd[1]: Created slice system-getty.slice.
[    1.884438] systemd[1]: Mounting Huge Pages File System...
[    1.886150] systemd[1]: Mounting Temporary Directory...
[    1.887078] systemd[1]: Mounting POSIX Message Queue File System...
[    1.889063] systemd[1]: Starting Apply Kernel Variables...
[    1.890052] systemd[1]: Mounting Configuration File System...
[    1.891042] systemd[1]: Mounting Debug File System...
[    1.892062] systemd[1]: Starting Setup Virtual Console...
[    1.894643] systemd[1]: Starting Journal Service...
[    1.895659] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.896786] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.896921] systemd[1]: Listening on udev Control Socket.
[    1.897027] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.897075] systemd[1]: Reached target Slices.
[    1.900422] systemd[1]: Started Setup Virtual Console.
[    1.904398] systemd[1]: Mounted POSIX Message Queue File System.
[    1.904462] systemd[1]: Mounted Huge Pages File System.
[    1.905183] systemd[1]: Mounted Temporary Directory.
[    1.910275] systemd[1]: Mounted Debug File System.
[    1.910336] systemd[1]: Mounted Configuration File System.
[    1.915754] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.922274] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
[    1.925329] systemd[1]: Started Remount Root and Kernel File Systems.
[    1.931344] systemd[1]: Started Apply Kernel Variables.
[    1.942320] systemd[1]: Starting udev Coldplug all Devices...
[    1.943444] systemd[1]: Starting Load/Save Random Seed...
[    1.944514] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.957822] systemd[1]: Started Load/Save Random Seed.
[    1.989579] systemd[1]: Started Create Static Device Nodes in /dev.
[    1.989720] systemd[1]: Reached target Local File Systems (Pre).
[    1.989781] systemd[1]: Reached target Local File Systems.
[    1.990866] systemd[1]: Starting udev Kernel Device Manager...
[    2.004992] systemd[1]: Started udev Coldplug all Devices.
[    2.058122] systemd[1]: Started udev Kernel Device Manager.
[    2.114908] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    2.146101] ACPI: Lid Switch [LID0]
[    2.146228] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    2.146237] ACPI: Power Button [PWRB]
[    2.146312] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    2.146317] ACPI: Sleep Button [TPAD]
[    2.146389] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input4
[    2.146394] ACPI: Sleep Button [TSCR]
[    2.146466] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.146471] ACPI: Power Button [PWRF]
[    2.176487] Monitor-Mwait will be used to enter C-1 state
[    2.176507] Monitor-Mwait will be used to enter C-2 state
[    2.176539] ACPI: acpi_idle registered with cpuidle
[    2.216642] INT3403: probe of INT3403:03 failed with error -22
[    2.236322] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[    2.266887] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    2.267735] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    2.268502] ACPI: AC Adapter [AC] (on-line)
[    2.279614] ACPI: Battery Slot [BAT0] (battery present)
[    2.306693] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.331701] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.336588] [drm] Initialized drm 1.1.0 20060810
[    2.336693] tpm_tis 00:0a: [Firmware Bug]: TPM interrupt not working, polling instead
[    2.342926] media: Linux media interface: v0.10
[    2.350239] Linux video capture interface: v2.00
[    2.359589] systemd[1]: Started Journal Service.
[    2.370311] cfg80211: Calling CRDA to update world regulatory domain
[    2.375929] Bluetooth: Core ver 2.18
[    2.375956] NET: Registered protocol family 31
[    2.375959] Bluetooth: HCI device and connection manager initialized
[    2.375969] Bluetooth: HCI socket layer initialized
[    2.375973] Bluetooth: L2CAP socket layer initialized
[    2.375986] Bluetooth: SCO socket layer initialized
[    2.392254] snd_hda_intel 0000:00:1b.0: irq 105 for MSI/MSI-X
[    2.400453] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
[    2.403743] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.403749] Copyright(c) 2003- 2014 Intel Corporation
[    2.404334] iwlwifi 0000:01:00.0: irq 106 for MSI/MSI-X
[    2.404939] usbcore: registered new interface driver btusb
[    2.412353] [drm] Memory usable by graphics device = 2048M
[    2.412361] checking generic (a0000 10000) vs hw (c0000000 10000000)
[    2.412364] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    2.412387] Console: switching to colour dummy device 80x25
[    2.415881] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
[    2.415984] usbcore: registered new interface driver uvcvideo
[    2.415987] USB Video Class driver (1.1.1)
[    2.423460] Bluetooth: hci0: read Intel version: 370710018002030d00
[    2.429404] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.429537] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.438478] iwlwifi 0000:01:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
[    2.442932] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    2.466284] i915 0000:00:02.0: irq 107 for MSI/MSI-X
[    2.466299] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.466302] [drm] Driver supports precise vblank timestamp query.
[    2.466408] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.476936] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[    2.478213] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    2.478468] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    2.570122] systemd-journald[201]: Received request to flush runtime journal from PID 1
[    2.606524] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    2.686516] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    2.686539] Switched to clocksource tsc
[    2.697589] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.806476] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[    2.828620] fbcon: inteldrmfb (fb0) is primary device
[    2.842688] random: nonblocking pool is initialized
[    3.812242] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    3.812484] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    3.833905] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    4.067904] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
[    5.489168] Console: switching to colour frame buffer device 170x48
[    5.514935] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.514943] i915 0000:00:02.0: registered panic notifier
[    5.515024] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.447820] wlp1s0: authenticate with 18:1b:eb:e7:63:2b
[    9.450906] wlp1s0: send auth to 18:1b:eb:e7:63:2b (try 1/3)
[    9.452722] wlp1s0: authenticated
[    9.461919] wlp1s0: associate with 18:1b:eb:e7:63:2b (try 1/3)
[    9.465421] wlp1s0: RX AssocResp from 18:1b:eb:e7:63:2b (capab=0x411 status=0 aid=1)
[    9.466569] wlp1s0: associated
[    9.466617] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready

and Ubuntu 14.04.3 (try mode):

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
[    0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000007ae5bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ae5c000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000febfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed05000-0x00000000fed05fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: GOOGLE Gnawty, BIOS          08/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ae5c max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 060000000 mask FF0000000 write-back
[    0.000000]   3 base 070000000 mask FF8000000 write-back
[    0.000000]   4 base 078000000 mask FFC000000 write-back
[    0.000000]   5 base 07B800000 mask FFF800000 uncachable
[    0.000000]   6 base 0FF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 512MB, type WB
[    0.000000] reg 2, base: 1536MB, range: 256MB, type WB
[    0.000000] reg 3, base: 1792MB, range: 128MB, type WB
[    0.000000] reg 4, base: 1920MB, range: 64MB, type WB
[    0.000000] reg 5, base: 1976MB, range: 8MB, type UC
[    0.000000] reg 6, base: 4088MB, range: 8MB, type UC
[    0.000000] total RAM covered: 1976M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 1976MB, range: 8MB, type UC
[    0.000000] reg 2, base: 1984MB, range: 64MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x79600000-0x797fffff]
[    0.000000]  [mem 0x79600000-0x797fffff] page 2M
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x795fffff]
[    0.000000]  [mem 0x60000000-0x795fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20100000-0x3fffffff]
[    0.000000]  [mem 0x20100000-0x201fffff] page 4k
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x79800000-0x7ae5bfff]
[    0.000000]  [mem 0x79800000-0x7adfffff] page 2M
[    0.000000]  [mem 0x7ae00000-0x7ae5bfff] page 4k
[    0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x799aa000-0x7ae5bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F3750 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007AF780E0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007AF7C540 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 0x000000007AF78250 0042EA (v05 COREv4 COREBOOT 20110725 INTL 20130117)
[    0.000000] ACPI: FACS 0x000000007AF78210 000040
[    0.000000] ACPI: HPET 0x000000007AF7C640 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007AF7C680 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 0x000000007AF7C6E0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x000000007AF7D7D0 000810 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ae5bfff]
[    0.000000] NODE_DATA(0) allocated [mem 0x799a5000-0x799a9fff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880077000000-ffff880078ffffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7ae5bfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20100000-0x7ae5bfff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7ae5bfff]
[    0.000000] On node 0 totalpages: 503034
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7802 pages used for memmap
[    0.000000]   DMA32 zone: 499036 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880079600000 s86144 r8192 d32640 u1048576
[    0.000000] pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 495147
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1941336K/2012136K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 70800K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 2163200 KHz
[    0.000000] lapic_timer_frequency = 332800
[    0.000000] tsc: Detected 2163.200 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=8652800)
[    0.000042] pid_max: default: 32768 minimum: 301
[    0.000051] ACPI: Core revision 20141107
[    0.006290] ACPI: All ACPI Tables successfully acquired
[    0.008225] Security Framework initialized
[    0.008249] AppArmor: AppArmor initialized
[    0.008252] Yama: becoming mindful.
[    0.008535] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009434] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.009861] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.009871] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.010234] Initializing cgroup subsys memory
[    0.010250] Initializing cgroup subsys devices
[    0.010256] Initializing cgroup subsys freezer
[    0.010262] Initializing cgroup subsys net_cls
[    0.010267] Initializing cgroup subsys blkio
[    0.010272] Initializing cgroup subsys perf_event
[    0.010278] Initializing cgroup subsys net_prio
[    0.010283] Initializing cgroup subsys hugetlb
[    0.010314] CPU: Physical Processor ID: 0
[    0.010317] CPU: Processor Core ID: 0
[    0.010322] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010322] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.015063] mce: CPU supports 6 MCE banks
[    0.015073] CPU0: Thermal monitoring enabled (TM1)
[    0.015078] process: using mwait in idle threads
[    0.015085] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.015085] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.015214] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[    0.016642] ftrace: allocating 29988 entries in 118 pages
[    0.033036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072710] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2830  @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[    0.072737] TSC deadline timer enabled
[    0.072770] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.072785] ... version:                3
[    0.072787] ... bit width:              40
[    0.072789] ... generic registers:      2
[    0.072791] ... value mask:             000000ffffffffff
[    0.072793] ... max period:             000000ffffffffff
[    0.072795] ... fixed-purpose events:   3
[    0.072797] ... event mask:             0000000700000003
[    0.074317] x86: Booting SMP configuration:
[    0.074323] .... node  #0, CPUs:      #1
[    0.092068] x86: Booted up 1 node, 2 CPUs
[    0.092074] smpboot: Total of 2 processors activated (8652.80 BogoMIPS)
[    0.092125] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092692] devtmpfs: initialized
[    0.099006] evm: security.selinux
[    0.099010] evm: security.SMACK64
[    0.099012] evm: security.SMACK64EXEC
[    0.099014] evm: security.SMACK64TRANSMUTE
[    0.099016] evm: security.SMACK64MMAP
[    0.099018] evm: security.ima
[    0.099020] evm: security.capability
[    0.099357] pinctrl core: initialized pinctrl subsystem
[    0.099532] RTC time: 23:28:58, date: 09/06/15
[    0.099763] NET: Registered protocol family 16
[    0.104074] cpuidle: using governor ladder
[    0.108070] cpuidle: using governor menu
[    0.108186] ACPI: bus type PCI registered
[    0.108190] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.108311] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.108317] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.109004] PCI: Using configuration type 1 for base access
[    0.116934] ACPI: Added _OSI(Module Device)
[    0.116940] ACPI: Added _OSI(Processor Device)
[    0.116942] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.116945] ACPI: Added _OSI(Processor Aggregator Device)
[    0.122501] ACPI: Interpreter enabled
[    0.122513] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.122521] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.122545] ACPI: (supports S0 S3 S4 S5)
[    0.122548] ACPI: Using IOAPIC for interrupt routing
[    0.122596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.129063] ACPI: Power Resource [PLPE] (on)
[    0.130895] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.130906] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.130994] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.131164] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000a0000-0x000bffff] ignored
[    0.131170] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c0000-0x000c3fff] ignored
[    0.131174] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c4000-0x000c7fff] ignored
[    0.131178] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000c8000-0x000cbfff] ignored
[    0.131182] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000cc000-0x000cffff] ignored
[    0.131187] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d0000-0x000d3fff] ignored
[    0.131191] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d4000-0x000d7fff] ignored
[    0.131195] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000d8000-0x000dbfff] ignored
[    0.131199] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000dc000-0x000dffff] ignored
[    0.131203] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e0000-0x000e3fff] ignored
[    0.131208] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e4000-0x000e7fff] ignored
[    0.131212] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000e8000-0x000ebfff] ignored
[    0.131216] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000ec000-0x000effff] ignored
[    0.131220] acpi PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfeafffff]; [mem 0x000f0000-0x000fffff] ignored
[    0.131324] PCI host bridge to bus 0000:00
[    0.131329] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.131333] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.131337] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.131341] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfeafffff]
[    0.131345] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.131356] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.131476] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.131492] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.131505] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.131517] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.131651] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.131673] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit]
[    0.131737] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.131773] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.131857] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.131887] pci 0000:00:1a.0: reg 0x10: [mem 0xd0600000-0xd06fffff]
[    0.131902] pci 0000:00:1a.0: reg 0x14: [mem 0xd0700000-0xd07fffff]
[    0.132015] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.132116] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.132141] pci 0000:00:1b.0: reg 0x10: [mem 0xd0914000-0xd0917fff 64bit]
[    0.132218] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.132311] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.132380] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.132481] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.132740] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[    0.132811] pci 0000:01:00.0: reg 0x10: [mem 0xd0800000-0xd0801fff 64bit]
[    0.133021] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.140829] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.140838] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.141085] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.141196] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.141311] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.141418] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.141525] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.141632] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.141738] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[    0.141844] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0
[    0.146108] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.146305] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.146310] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.146314] vgaarb: loaded
[    0.146316] vgaarb: bridge control possible 0000:00:02.0
[    0.146753] SCSI subsystem initialized
[    0.146852] libata version 3.00 loaded.
[    0.146905] ACPI: bus type USB registered
[    0.146943] usbcore: registered new interface driver usbfs
[    0.146962] usbcore: registered new interface driver hub
[    0.146992] usbcore: registered new device driver usb
[    0.147250] PCI: Using ACPI for IRQ routing
[    0.153154] PCI: pci_cache_line_size set to 64 bytes
[    0.153205] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.153208] e820: reserve RAM buffer [mem 0x7ae5c000-0x7bffffff]
[    0.153409] NetLabel: Initializing
[    0.153413] NetLabel:  domain hash size = 128
[    0.153414] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.153437] NetLabel:  unlabeled traffic allowed by default
[    0.153600] Switched to clocksource refined-jiffies
[    0.164354] AppArmor: AppArmor Filesystem Enabled
[    0.164494] pnp: PnP ACPI init
[    0.164646] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.164654] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.164658] system 00:00: [mem 0xfed03000-0xfed033ff] has been reserved
[    0.164663] system 00:00: [mem 0xfed08000-0xfed083ff] has been reserved
[    0.164667] system 00:00: [mem 0xfed01000-0xfed013ff] has been reserved
[    0.164672] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.164676] system 00:00: [mem 0xfed05000-0xfed057ff] has been reserved
[    0.164680] system 00:00: [mem 0xfed1c000-0xfed1c3ff] has been reserved
[    0.164686] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165023] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.165029] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.165106] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165160] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.165237] system 00:04: [io  0x0900-0x09fe] has been reserved
[    0.165243] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165319] system 00:05: [io  0x0200] has been reserved
[    0.165324] system 00:05: [io  0x0204] has been reserved
[    0.165329] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.165333] system 00:05: [io  0x0880-0x08ff] has been reserved
[    0.165338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165422] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.165520] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.166160] pnp: PnP ACPI: found 8 devices
[    0.174464] Switched to clocksource acpi_pm
[    0.174492] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.174500] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    0.174509] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.174513] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.174517] pci_bus 0000:00: resource 6 [mem 0x00000000-0xfeafffff]
[    0.174521] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff]
[    0.174525] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[    0.174568] NET: Registered protocol family 2
[    0.174848] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.174921] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.174998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.175045] TCP: reno registered
[    0.175054] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.175074] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.175163] NET: Registered protocol family 1
[    0.175190] pci 0000:00:02.0: Video device with shadowed ROM
[    0.176176] PCI: CLS 64 bytes, default 64
[    0.176286] Trying to unpack rootfs image as initramfs...
[    7.487647] Freeing initrd memory: 21192K (ffff8800799aa000 - ffff88007ae5c000)
[    7.488019] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x829
[    7.488029] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x829
[    7.488151] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.488201] Scanning for low memory corruption every 60 seconds
[    7.488879] futex hash table entries: 512 (order: 3, 32768 bytes)
[    7.488902] Initialise system trusted keyring
[    7.488942] audit: initializing netlink subsys (disabled)
[    7.488974] audit: type=2000 audit(1441582145.447:1): initialized
[    7.489473] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    7.492439] zpool: loaded
[    7.492445] zbud: loaded
[    7.492718] VFS: Disk quotas dquot_6.5.2
[    7.492794] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    7.493787] fuse init (API version 7.23)
[    7.494063] Key type big_key registered
[    7.494995] Key type asymmetric registered
[    7.495002] Asymmetric key parser 'x509' registered
[    7.495079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    7.495151] io scheduler noop registered
[    7.495157] io scheduler deadline registered (default)
[    7.495221] io scheduler cfq registered
[    7.495993] aer 0000:00:1c.0:pcie02: service driver aer loaded
[    7.496023] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    7.496028] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    7.496033] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    7.496049] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.496080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    7.496162] intel_idle: MWAIT substates: 0x33000020
[    7.496166] intel_idle: v0.4 model 0x37
[    7.496168] intel_idle: lapic_timer_reliable_states 0xffffffff
[    7.496516] ACPI: AC Adapter [AC] (on-line)
[    7.496705] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    7.496774] ACPI: Lid Switch [LID0]
[    7.496857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    7.496863] ACPI: Power Button [PWRB]
[    7.496942] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    7.496947] ACPI: Sleep Button [TPAD]
[    7.497020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input3
[    7.497026] ACPI: Sleep Button [TSCR]
[    7.497101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.497107] ACPI: Power Button [PWRF]
[    7.497606] GHES: HEST is not enabled!
[    7.497786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    7.498282] ACPI: Battery Slot [BAT0] (battery present)
[    7.517966] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.523166] hpet_acpi_add: no address or irqs in _CRS
[    7.523196] Linux agpgart interface v0.103
[    7.523634] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16)
[    7.580946] tpm_tis 00:07: [Firmware Bug]: TPM interrupt not working, polling instead
[    7.777696] brd: module loaded
[    7.780129] loop: module loaded
[    7.780535] libphy: Fixed MDIO Bus: probed
[    7.780541] tun: Universal TUN/TAP device driver, 1.6
[    7.780544] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.780742] PPP generic driver version 2.4.2
[    7.781394] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.781406] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    7.781803] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    7.781936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.781940] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.781944] usb usb1: Product: xHCI Host Controller
[    7.781948] usb usb1: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
[    7.781951] usb usb1: SerialNumber: 0000:00:14.0
[    7.782417] hub 1-0:1.0: USB hub found
[    7.782436] hub 1-0:1.0: 6 ports detected
[    7.782820] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.782827] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    7.782894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    7.782899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.782902] usb usb2: Product: xHCI Host Controller
[    7.782906] usb usb2: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
[    7.782909] usb usb2: SerialNumber: 0000:00:14.0
[    7.783211] hub 2-0:1.0: USB hub found
[    7.783225] hub 2-0:1.0: 1 port detected
[    7.783377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.783389] ehci-pci: EHCI PCI platform driver
[    7.783412] ehci-platform: EHCI generic platform driver
[    7.783440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.783450] ohci-pci: OHCI PCI platform driver
[    7.783474] ohci-platform: OHCI generic platform driver
[    7.783494] uhci_hcd: USB Universal Host Controller Interface driver
[    7.783592] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 53
[    7.783595] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    7.784106] i8042: Warning: Keylock active
[    7.784252] serio: i8042 KBD port at 0x60,0x64 irq 53
[    7.784580] mousedev: PS/2 mouse device common for all mice
[    7.785731] rtc_cmos 00:03: RTC can wake from S4
[    7.785935] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    7.785982] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[    7.786019] i2c /dev entries driver
[    7.786165] device-mapper: uevent: version 1.0.3
[    7.786443] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    7.786463] Intel P-state driver initializing.
[    7.786912] Consider also installing thermald for improved thermal control.
[    7.786931] ledtrig-cpu: registered to indicate activity on CPUs
[    7.787548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    7.787950] PCCT header not found.
[    7.787953] ACPI PCC probe failed.
[    7.788163] TCP: cubic registered
[    7.788372] NET: Registered protocol family 10
[    7.788796] NET: Registered protocol family 17
[    7.788823] Key type dns_resolver registered
[    7.790443] Loading compiled-in X.509 certificates
[    7.792181] Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
[    7.792213] registered taskstats version 1
[    7.796867] Key type trusted registered
[    7.806259] Key type encrypted registered
[    7.806274] AppArmor: AppArmor sha1 policy hashing enabled
[    8.093416] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    8.224988] usb 1-2: New USB device found, idVendor=3538, idProduct=0054
[    8.225062] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.225080] usb 1-2: Product: PQI USB Flash Drive
[    8.225094] usb 1-2: Manufacturer: PQI
[    8.225107] usb 1-2: SerialNumber: 00000000000077
[    8.337525] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    8.429730] evm: HMAC attrs: 0x1
[    8.430171]   Magic number: 15:834:503
[    8.430390] rtc_cmos 00:03: setting system clock to 2015-09-06 23:29:07 UTC (1441582147)
[    8.430489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    8.430492] EDD information not available.
[    8.430635] PM: Hibernation image not present or could not be loaded.
[    8.431384] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[    8.431390] Write protecting the kernel read-only data: 12288k
[    8.432100] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[    8.432530] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
[    8.460767] systemd-udevd[106]: starting version 204
[    8.485270] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[    8.496623] sdhci: Secure Digital Host Controller Interface driver
[    8.496628] sdhci: Copyright(c) Pierre Ossman
[    8.507352] [drm] Initialized drm 1.1.0 20060810
[    8.519669] sdhci-acpi 80860F14:00: No vmmc regulator found
[    8.519675] sdhci-acpi 80860F14:00: No vqmmc regulator found
[    8.540207] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    8.540580] sdhci-acpi 80860F16:00: failed to setup card detect gpio
[    8.541606] sdhci-acpi 80860F16:00: No vmmc regulator found
[    8.541612] sdhci-acpi 80860F16:00: No vqmmc regulator found
[    8.546915] [drm] Memory usable by graphics device = 2048M
[    8.546921] [drm] Replacing VGA console driver
[    8.548436] Console: switching to colour dummy device 80x25
[    8.550040] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.550045] [drm] Driver supports precise vblank timestamp query.
[    8.550104] mmc1: SDHCI controller on ACPI [80860F16:00] using ADMA
[    8.588532] usb 1-3: New USB device found, idVendor=1bcf, idProduct=2c67
[    8.590571] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.590575] usb 1-3: Product: HD WebCam
[    8.590578] usb 1-3: Manufacturer: SunplusIT Inc
[    8.645667] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.691229] mmc0: BKOPS_EN bit is not set
[    8.710056] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[    8.735413] mmc0: new HS200 MMC card at address 0001
[    8.739113] Driver 'mmcblk' needs updating - please use bus_type methods
[    8.739248] mmcblk0: mmc0:0001 HAG2e\x05 14.6 GiB 
[    8.739450] mmcblk0boot0: mmc0:0001 HAG2e\x05 partition 1 4.00 MiB
[    8.739537] mmcblk0boot1: mmc0:0001 HAG2e\x05 partition 2 4.00 MiB
[    8.739621] mmcblk0rpmb: mmc0:0001 HAG2e\x05 partition 3 4.00 MiB
[    8.740667]  mmcblk0: p1
[    8.765499] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[    8.768121] fbcon: inteldrmfb (fb0) is primary device
[    8.773543] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    8.903434] usb 1-4: New USB device found, idVendor=8087, idProduct=07dc
[    8.903437] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.911388] usb-storage 1-2:1.0: USB Mass Storage device detected
[    8.911918] scsi host0: usb-storage 1-2:1.0
[    8.912108] usbcore: registered new interface driver usb-storage
[    8.914535] usbcore: registered new interface driver uas
[    9.486663] Switched to clocksource tsc
[    9.912485] scsi 0:0:0:0: Direct-Access     Generic  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[    9.913006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.913717] sd 0:0:0:0: [sda] 4030463 512-byte logical blocks: (2.06 GB/1.92 GiB)
[    9.914344] sd 0:0:0:0: [sda] Write Protect is off
[    9.914347] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[    9.915182] sd 0:0:0:0: [sda] Asking for cache data failed
[    9.915184] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    9.981452]  sda: sda1 sda2
[    9.984843] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   10.531034] Console: switching to colour frame buffer device 170x48
[   10.536874] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.536877] i915 0000:00:02.0: registered panic notifier
[   10.967410] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   11.207259] ISO 9660 Extensions: Microsoft Joliet Level 3
[   11.212001] ISO 9660 Extensions: RRIP_1991A
[   11.248035] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   11.665543] random: debconf-communi urandom read with 92 bits of entropy available
[   12.356520] random: nonblocking pool is initialized
[   24.598130] systemd-udevd[1109]: starting version 204
[   24.896351] lp: driver loaded but no devices found
[   24.932503] ppdev: user-space parallel port driver
[   25.051391] Bluetooth: Core ver 2.20
[   25.051751] NET: Registered protocol family 31
[   25.051755] Bluetooth: HCI device and connection manager initialized
[   25.052085] Bluetooth: HCI socket layer initialized
[   25.052239] Bluetooth: L2CAP socket layer initialized
[   25.052417] Bluetooth: SCO socket layer initialized
[   25.123062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.123068] Bluetooth: BNEP filters: protocol multicast
[   25.123075] Bluetooth: BNEP socket layer initialized
[   25.137249] Bluetooth: RFCOMM TTY layer initialized
[   25.137266] Bluetooth: RFCOMM socket layer initialized
[   25.137277] Bluetooth: RFCOMM ver 1.11
[   25.204470] sst-acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin-48kHz_i2s_master failed with error -2
[   25.204480] sst-acpi 80860F28:00: Cannot load firmware intel/fw_sst_0f28.bin-48kHz_i2s_master
[   25.280096] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[   25.284223] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   25.344186] elants_i2c i2c-ELAN0001:00: nothing at this address
[   25.370464] i2c-ELAN0000:00 supply vcc not found, using dummy regulator
[   25.594515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.610088] usbcore: registered new interface driver btusb
[   25.616551] input: Elan Touchpad as /devices/platform/80860F41:00/i2c-8/i2c-ELAN0000:00/input/input6
[   25.625067] init: cups main process (1199) killed by HUP signal
[   25.625092] init: cups main process ended, respawning
[   25.628323] Bluetooth: hci0: read Intel version: 370710018002030d00
[   25.657433] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   25.778752] cfg80211: Calling CRDA to update world regulatory domain
[   25.815596] media: Linux media interface: v0.10
[   25.839747] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   25.846582] Linux video capture interface: v2.00
[   25.885660] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   25.885665] Copyright(c) 2003- 2014 Intel Corporation
[   25.915817] device-mapper: multipath: version 1.7.0 loaded
[   25.983617] iwlwifi 0000:01:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
[   26.001460] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
[   26.011424] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
[   26.015667] usbcore: registered new interface driver uvcvideo
[   26.015672] USB Video Class driver (1.1.1)
[   26.088562] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   26.089656] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[   26.089906] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[   26.263587] intel_soc_dts_thermal: request_threaded_irq ret -22
[   26.328714] intel_soc_dts_thermal: request_threaded_irq ret -22
[   26.341523] intel_rapl: Found RAPL domain package
[   26.341529] intel_rapl: Found RAPL domain core
[   26.347312] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   26.561712] byt-max98090 byt-max98090: ASoC: CPU DAI baytrail-pcm-audio not registered
[   26.561731] byt-max98090 byt-max98090: snd_soc_register_card failed -517
[   26.561740] platform byt-max98090: Driver byt-max98090 requests probe deferral
[   26.652075] mei_txe 0000:00:1a.0: wait for readiness failed
[   26.652083] mei_txe 0000:00:1a.0: waiting for readiness failed
[   26.652088] mei_txe 0000:00:1a.0: hw_start failed ret = -62
[   26.767713] cfg80211: World regulatory domain updated:
[   26.767721] cfg80211:  DFS Master region: unset
[   26.767723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   26.767728] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   26.767731] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   26.767734] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   26.767737] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   26.767740] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   26.819580] init: failsafe main process (1380) killed by TERM signal
[   27.652829] mei_txe 0000:00:1a.0: wait for readiness failed
[   27.652843] mei_txe 0000:00:1a.0: waiting for readiness failed
[   27.652853] mei_txe 0000:00:1a.0: hw_start failed ret = -62
[   28.374941] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[   28.375188] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[   28.393012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.653639] mei_txe 0000:00:1a.0: wait for readiness failed
[   28.653647] mei_txe 0000:00:1a.0: waiting for readiness failed
[   28.653652] mei_txe 0000:00:1a.0: hw_start failed ret = -62
[   28.653655] mei_txe 0000:00:1a.0: reset: reached maximal consecutive resets: disabling the device
[   28.653658] mei_txe 0000:00:1a.0: reset failed ret = -19
[   28.653661] mei_txe 0000:00:1a.0: link layer initialization failed.
[   28.653664] mei_txe 0000:00:1a.0: init hw failure.
[   28.654275] mei_txe 0000:00:1a.0: initialization failed.
[   28.658045] byt-max98090 byt-max98090: ASoC: CPU DAI baytrail-pcm-audio not registered
[   28.658062] byt-max98090 byt-max98090: snd_soc_register_card failed -517
[   28.658071] platform byt-max98090: Driver byt-max98090 requests probe deferral
[   28.748010] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   28.748801] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   32.499141] init: plymouth-upstart-bridge main process ended, respawning
[   32.519544] init: plymouth-upstart-bridge main process (2106) terminated with status 1
[   32.519571] init: plymouth-upstart-bridge main process ended, respawning
[   78.904663] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)

dioib · 2015-09-07 00:17:10

I am not sure how relevant this might be but just before the display goes offline when I shutdown, it also throws this message (modulo punctuations maybe):

[{some number}] cgroup: option or name mismatch: new 0x0 "", old 0x4 "systemd"

Just one line.

Edit: literal correction.

Last edited by dioib (2015-09-07 00:52:25)

loqs · 2015-09-07 00:18:01

https://git.kernel.org/cgit/linux/kerne … s/v3.14.51
notice no elan_i2c* files in 3.14.51
https://git.kernel.org/cgit/linux/kerne … ags/v4.1.6
they are present here 4.1.6
according to http://cateee.net/lkddb/web-lkddb/MOUSE_ELAN_I2C.html
found in Linux kernels: 3.19, 4.0–4.2, 4.2+HEAD

from the ubuntu 3.19 dmesg

[   25.344186] elants_i2c i2c-ELAN0001:00: nothing at this address
[   25.370464] i2c-ELAN0000:00 supply vcc not found, using dummy regulator

and then 2 lines later

[   25.616551] input: Elan Touchpad as /devices/platform/80860F41:00/i2c-8/i2c-ELAN0000:00/input/input6

So what I think is missing is kernel support in 3.14 for the i2c interface that connects the trackpad to the motherboard.
What I do not know is was the code for elan i2c actually added in 3.19 or was it simply refactored into its own module then.

dioib · 2015-09-07 00:57:05

Ioqs, thank you so much! I am downloading the 4.2 kernel and try to build and install it --never done it before but breaking things should be easy.

twix · 2015-09-07 14:06:21

dioib wrote:

Ioqs, thank you so much! I am downloading the 4.2 kernel and try to build and install it --never done it before but breaking things should be easy.

I have it just compiled if you want, but it did not fix my problem sadly.

loqs · 2015-09-07 15:06:54

@twix from your xorg log

[    64.229] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    64.229] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    64.230] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 27 paused 0
[    64.230] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[    64.230] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    64.230] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    64.230] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    64.230] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    64.230] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[    64.230] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    64.230] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    64.230] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    64.231] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    64.231] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"

There is a touchpad visible to xorg which it is not for dioib.
twix if the touchpad also shows in the output from

cat /sys/class/input/event*/device/name

Then I would say it is a different issue
--
Edit Spelling

Last edited by loqs (2015-09-07 15:07:28)

twix · 2015-09-07 15:13:28

loqs wrote:

There is a touchpad visible to xorg which it is not for dioib.
twix if the touchpad also shows in the output from
cat /sys/class/input/event*/device/name
Then I would say it is a different issue

You're right, while the touchpad is not responding and not found by synclient, it is recognized by Xorg.

Sorry for the noise

dioib · 2015-09-07 21:49:58

First and foremost: thank you loqs for your patience and help; I really appreciate it.

I did the following and got the touch back:

- Started with the LTS version (3.14.51-1-lts) since the current version can't reach the login prompt. I presume I could chroot but I didn't want to explore all the possibilities.
- Followed the instructions on Kernels/Compilation/Traditional and built (from 4.2.0) upon my LTS .config file (next step).
- Used make nconfig since it's mentioned that it automatically takes care of dependencies; I added the following on top of LTS:
- device drivers/input device support/mice/ELAN I2C trackpad support/..
- device drivers/platform support for chrome hardware/..
- firmware drivers/google firmware drivers/..
Here '..' stands for 'choosing everything in that branch' (I used 'M' where applicable).
- Followed the rest of instructions on Kernels/Compilation/Traditional.

Not all of those modules might be necessary though; I have not experimented with that since I have other hardware problems as well.

@twix: this might work for you too. And thanks for trying to get me out of this situation.

Now I need to see if I can get the audio back; I haven't got to HDMI support yet.

Edit: [cosmetic]

Last edited by dioib (2015-09-07 22:14:00)

ewaller · 2015-09-07 22:26:59

Nice Not many newcomers jump right into a custom kernel.

You can see which modules actually get loaded by the kernel using lsmod. It will help you determine which modules are needed and which are not. Once you work that out, I suggest you file a bug against the Arch Kernel and ask for those modules to be included and the indicate hardware that requires it.

dioib · 2015-09-07 23:05:12

Thank you ewaller; I didn't want to surrender to Ubuntu's initial convenience, my machine doesn't take it well with only 2 GBs of RAM; that was the main reason I broke free from running linux under Chrome OS (thanks to John Lewis) --besides the scary boot screen.

Figuring out which module is which is going to take me a while, but I will. Here is the output of my lsmod BTW:

Module                  Size  Used by
sha256_ssse3           16668  1
sha256_generic         10457  1 sha256_ssse3
hmac                    3153  1
drbg                   14644  1
ansi_cprng              4068  0
ctr                     4031  1
ccm                     8574  1
arc4                    2296  2
iwlmvm                213699  0
mac80211              559098  1 iwlmvm
tpm_infineon            7782  0
coretemp                6492  0
snd_hda_codec_hdmi     40649  1
hwmon                   3506  1 coretemp
joydev                 10407  0
intel_powerclamp        8310  0
iTCO_wdt                6052  0
mousedev               10824  0
iTCO_vendor_support     2161  1 iTCO_wdt
kvm_intel             153202  0
kvm                   438613  1 kvm_intel
crct10dif_pclmul        4580  0
crc32_pclmul            3059  0
crc32c_intel           13318  0
ghash_clmulni_intel     4338  0
snd_hda_intel          25434  0
cryptd                  9033  1 ghash_clmulni_intel
snd_hda_codec          97958  2 snd_hda_codec_hdmi,snd_hda_intel
uvcvideo               76541  0
i915                 1045565  3
evdev                  11031  12
snd_hda_core           40285  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
iwlwifi               157268  1 iwlmvm
input_leds              3150  0
snd_hwdep               6314  1 snd_hda_codec
btusb                  31635  0
videobuf2_vmalloc       5478  1 uvcvideo
mac_hid                 3505  0
snd_pcm                81560  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
btrtl                   4896  1 btusb
videobuf2_memops        2471  1 videobuf2_vmalloc
serio_raw               5194  0
videobuf2_core         34466  1 uvcvideo
btbcm                   5698  1 btusb
pcspkr                  2227  0
btintel                 1713  1 btusb
cfg80211              452607  3 iwlwifi,mac80211,iwlmvm
v4l2_common             3982  1 videobuf2_core
bluetooth             436345  5 btbcm,btrtl,btusb,btintel
snd_timer              19889  1 snd_pcm
lpc_ich                14368  0
video                  23684  1 i915
videodev              134207  3 uvcvideo,v4l2_common,videobuf2_core
snd                    60653  6 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
drm_kms_helper         92839  1 i915
tpm_tis                10523  0
media                  12709  2 uvcvideo,videodev
rfkill                 16010  3 cfg80211,bluetooth
soundcore               5475  1 snd
shpchp                 24857  0
ac                      3891  0
battery                 8010  0
dw_dmac                 2818  0
tpm                    27408  2 tpm_tis,tpm_infineon
drm                   278082  4 i915,drm_kms_helper
dw_dmac_core           16817  1 dw_dmac
intel_gtt              12615  1 i915
elan_i2c               23117  0
i2c_algo_bit            5520  1 i915
i2c_designware_platform     3892  0
8250_dw                 6540  0
i2c_designware_core     7245  1 i2c_designware_platform
spi_pxa2xx_platform    16402  0
i2c_core               40563  8 drm,i915,elan_i2c,i2c_designware_platform,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
button                  5041  1 i915
processor              25181  0
sch_fq_codel            8298  5
ip_tables              18050  0
x_tables               16744  1 ip_tables
ext4                  496944  1
crc16                   1591  2 ext4,bluetooth
mbcache                 7339  1 ext4
jbd2                   77809  1 ext4
mmc_block              27542  2
atkbd                  17117  0
libps2                  4739  1 atkbd
xhci_pci                4906  0
xhci_hcd              144659  1 xhci_pci
usbcore               189484  4 btusb,uvcvideo,xhci_hcd,xhci_pci
usb_common              1944  1 usbcore
i8042                  13929  1 libps2
serio                  11098  4 serio_raw,atkbd,i8042
sdhci_acpi              5169  0
sdhci                  30555  1 sdhci_acpi
led_class               4908  3 sdhci,iwlmvm,input_leds
mmc_core              100929  3 mmc_block,sdhci,sdhci_acpi

Edit: It sounded like I did the real work; that was all loqs.

Last edited by dioib (2015-09-07 23:23:35)

Arch Linux

#1 2015-09-06 08:38:27

[SOLVED] Touchpad not working (on Acer CB3-111)

#2 2015-09-06 15:54:26

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#3 2015-09-06 16:40:26

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#4 2015-09-06 17:05:32

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#5 2015-09-06 17:30:05

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#6 2015-09-06 17:44:08

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#7 2015-09-06 18:08:41

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#8 2015-09-06 18:20:50

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#9 2015-09-06 19:49:36

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#10 2015-09-06 20:42:07

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#11 2015-09-06 21:34:08

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#12 2015-09-06 22:33:28

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#13 2015-09-06 23:09:20

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#14 2015-09-06 23:15:24

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#15 2015-09-06 23:47:42

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#16 2015-09-07 00:17:10

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#17 2015-09-07 00:18:01

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#18 2015-09-07 00:57:05

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#19 2015-09-07 14:06:21

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#20 2015-09-07 15:06:54

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#21 2015-09-07 15:13:28

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#22 2015-09-07 21:49:58

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#23 2015-09-07 22:26:59

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

#24 2015-09-07 23:05:12

Re: [SOLVED] Touchpad not working (on Acer CB3-111)

Board footer