You are not logged in.
Hello everybody,
I have complete freezes on my computer from time to time and I cannot find the right solution. It does not respond to keyboard or mouse and only hardreset helps out.
I have installed Arch Linux with KDE Plasma 5 on my old laptop (Acer Travelmate 6292) a while ago (1 month now I think) and then ported the system on the SSD to an Acer TravelMate B115-M-41RQ. The only thing I had to mange was to install broadcom-wl drivers for WLAN.
On my older laptop I had no freezes. However, on the new one it freezes randomly. Sometimes only a few minutes after start and sometimes hours. Sometimes it does not freeze at all. IT freezes more often, when I do something on the internet (videostream, skype) but freezes even with WLAN and Ethernet both enabled (WLAN enabled and LAN cable plugged in).
I have read some information on the internet and my steps so far where:
1) Disable intel-pstates and use acpi-cpufreq (although the temperature should not be the problem)
2) change clocksource to acpi-pm (from tsc which was unstable in some cases)
3) run memtest86 with 7 passes and no errors
Here is my dmesg and xorg.log (without crash) . Maybe someone can tell me, how to see last log files after a hardreset, I have not find it out yet.
09/30/15 09:40:49 AM e820 BIOS-provided physical RAM map:
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000000000000-0x000000000009e7ff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x000000000009e800-0x000000000009ffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000000e0000-0x00000000000fffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000000100000-0x000000001effffff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x000000001f000000-0x000000001f0fffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x000000001f100000-0x000000001fffffff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000020000000-0x00000000200fffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000020100000-0x00000000781c0fff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000781c1000-0x00000000787c0fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000787c1000-0x00000000788c0fff] ACPI NVS
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000788c1000-0x0000000078900fff] ACPI data
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000078901000-0x00000000794c4fff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000794c5000-0x0000000079dc4fff] ACPI NVS
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000079dc5000-0x0000000079ffffff] usable
09/30/15 09:40:49 AM BIOS-e820 [mem 0x000000007a000000-0x000000007a7fffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x000000007ae00000-0x000000007fffffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fec00000-0x00000000fec00fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fed01000-0x00000000fed01fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fed03000-0x00000000fed03fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fed08000-0x00000000fed08fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fee00000-0x00000000fee00fff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000fef00000-0x00000000feffffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
09/30/15 09:40:49 AM BIOS-e820 [mem 0x0000000100000000-0x000000017fffffff] usable
09/30/15 09:40:49 AM NX (Execute Disable) protection: active
09/30/15 09:40:49 AM SMBIOS 2.7 present.
09/30/15 09:40:49 AM DMI Acer TravelMate B115-M/Roxy, BIOS V1.26 09/12/2014
09/30/15 09:40:49 AM e820 update [mem 0x00000000-0x00000fff] usable ==> reserved
09/30/15 09:40:49 AM e820 remove [mem 0x000a0000-0x000fffff] usable
09/30/15 09:40:49 AM e820 last_pfn = 0x180000 max_arch_pfn = 0x400000000
09/30/15 09:40:49 AM MTRR default type uncachable
09/30/15 09:40:49 AM MTRR fixed ranges enabled:
09/30/15 09:40:49 AM 00000-9FFFF write-back
09/30/15 09:40:49 AM A0000-BFFFF uncachable
09/30/15 09:40:49 AM C0000-FFFFF write-protect
09/30/15 09:40:49 AM MTRR variable ranges enabled:
09/30/15 09:40:49 AM 0 base 0FFC00000 mask FFFC00000 write-protect
09/30/15 09:40:49 AM 1 base 000000000 mask F80000000 write-back
09/30/15 09:40:49 AM 2 base 07C000000 mask FFC000000 uncachable
09/30/15 09:40:49 AM 3 base 07B000000 mask FFF000000 uncachable
09/30/15 09:40:49 AM 4 base 07AE00000 mask FFFE00000 uncachable
09/30/15 09:40:49 AM 5 base 100000000 mask F80000000 write-back
09/30/15 09:40:49 AM 6 disabled
09/30/15 09:40:49 AM 7 disabled
09/30/15 09:40:49 AM x86/PAT Configuration [0-7]: WB WC UC- UC WB WC UC- WT
09/30/15 09:40:49 AM e820 last_pfn = 0x7a000 max_arch_pfn = 0x400000000
09/30/15 09:40:49 AM Scanning 1 areas for low memory corruption
09/30/15 09:40:49 AM Base memory trampoline at [ffff880000098000] 98000 size 24576
09/30/15 09:40:49 AM init_memory_mapping [mem 0x00000000-0x000fffff]
09/30/15 09:40:49 AM [mem 0x00000000-0x000fffff] page 4k
09/30/15 09:40:49 AM BRK [0x01b36000, 0x01b36fff] PGTABLE
09/30/15 09:40:49 AM BRK [0x01b37000, 0x01b37fff] PGTABLE
09/30/15 09:40:49 AM BRK [0x01b38000, 0x01b38fff] PGTABLE
09/30/15 09:40:49 AM init_memory_mapping [mem 0x17fe00000-0x17fffffff]
09/30/15 09:40:49 AM [mem 0x17fe00000-0x17fffffff] page 2M
09/30/15 09:40:49 AM BRK [0x01b39000, 0x01b39fff] PGTABLE
09/30/15 09:40:49 AM init_memory_mapping [mem 0x160000000-0x17fdfffff]
09/30/15 09:40:49 AM [mem 0x160000000-0x17fdfffff] page 2M
09/30/15 09:40:49 AM init_memory_mapping [mem 0x00100000-0x1effffff]
09/30/15 09:40:49 AM [mem 0x00100000-0x001fffff] page 4k
09/30/15 09:40:49 AM [mem 0x00200000-0x1effffff] page 2M
09/30/15 09:40:49 AM init_memory_mapping [mem 0x1f100000-0x1fffffff]
09/30/15 09:40:49 AM [mem 0x1f100000-0x1f1fffff] page 4k
09/30/15 09:40:49 AM [mem 0x1f200000-0x1fffffff] page 2M
09/30/15 09:40:49 AM BRK [0x01b3a000, 0x01b3afff] PGTABLE
09/30/15 09:40:49 AM init_memory_mapping [mem 0x20100000-0x781c0fff]
09/30/15 09:40:49 AM [mem 0x20100000-0x201fffff] page 4k
09/30/15 09:40:49 AM [mem 0x20200000-0x77ffffff] page 2M
09/30/15 09:40:49 AM [mem 0x78000000-0x781c0fff] page 4k
09/30/15 09:40:49 AM BRK [0x01b3b000, 0x01b3bfff] PGTABLE
09/30/15 09:40:49 AM init_memory_mapping [mem 0x78901000-0x794c4fff]
09/30/15 09:40:49 AM [mem 0x78901000-0x789fffff] page 4k
09/30/15 09:40:49 AM [mem 0x78a00000-0x793fffff] page 2M
09/30/15 09:40:49 AM [mem 0x79400000-0x794c4fff] page 4k
09/30/15 09:40:49 AM init_memory_mapping [mem 0x79dc5000-0x79ffffff]
09/30/15 09:40:49 AM [mem 0x79dc5000-0x79dfffff] page 4k
09/30/15 09:40:49 AM [mem 0x79e00000-0x79ffffff] page 2M
09/30/15 09:40:49 AM init_memory_mapping [mem 0x100000000-0x15fffffff]
09/30/15 09:40:49 AM [mem 0x100000000-0x15fffffff] page 2M
09/30/15 09:40:49 AM RAMDISK [mem 0x37670000-0x37b2ffff]
09/30/15 09:40:49 AM ACPI Early table checksum verification disabled
09/30/15 09:40:49 AM ACPI RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
09/30/15 09:40:49 AM ACPI XSDT 0x0000000078900120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
09/30/15 09:40:49 AM ACPI FACP 0x00000000788F8000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI DSDT 0x00000000788EB000 008978 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI FACS 0x000000007887A000 000040
09/30/15 09:40:49 AM ACPI UEFI 0x00000000788FF000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
09/30/15 09:40:49 AM ACPI UEFI 0x00000000788FD000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788F9000 0030C1 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
09/30/15 09:40:49 AM ACPI HPET 0x00000000788F7000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI LPIT 0x00000000788F6000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI APIC 0x00000000788F5000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI MCFG 0x00000000788F4000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788EA000 0005D6 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E8000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E7000 0007DB (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E6000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E5000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E4000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
09/30/15 09:40:49 AM ACPI CSRT 0x00000000788E3000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
09/30/15 09:40:49 AM ACPI SSDT 0x00000000788E2000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
09/30/15 09:40:49 AM ACPI FPDT 0x00000000788E1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
09/30/15 09:40:49 AM ACPI Local APIC address 0xfee00000
09/30/15 09:40:49 AM No NUMA configuration found
09/30/15 09:40:49 AM Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
09/30/15 09:40:49 AM NODE_DATA(0) allocated [mem 0x17fff6000-0x17fff9fff]
09/30/15 09:40:49 AM [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
09/30/15 09:40:49 AM Zone ranges
09/30/15 09:40:49 AM DMA [mem 0x0000000000001000-0x0000000000ffffff]
09/30/15 09:40:49 AM DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
09/30/15 09:40:49 AM Normal [mem 0x0000000100000000-0x000000017fffffff]
09/30/15 09:40:49 AM Movable zone start for each node
09/30/15 09:40:49 AM Early memory node ranges
09/30/15 09:40:49 AM node 0 [mem 0x0000000000001000-0x000000000009dfff]
09/30/15 09:40:49 AM node 0 [mem 0x0000000000100000-0x000000001effffff]
09/30/15 09:40:49 AM node 0 [mem 0x000000001f100000-0x000000001fffffff]
09/30/15 09:40:49 AM node 0 [mem 0x0000000020100000-0x00000000781c0fff]
09/30/15 09:40:49 AM node 0 [mem 0x0000000078901000-0x00000000794c4fff]
09/30/15 09:40:49 AM node 0 [mem 0x0000000079dc5000-0x0000000079ffffff]
09/30/15 09:40:49 AM node 0 [mem 0x0000000100000000-0x000000017fffffff]
09/30/15 09:40:49 AM Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
09/30/15 09:40:49 AM On node 0 totalpages: 1019229
09/30/15 09:40:49 AM DMA zone 64 pages used for memmap
09/30/15 09:40:49 AM DMA zone 21 pages reserved
09/30/15 09:40:49 AM DMA zone 3997 pages, LIFO batch:0
09/30/15 09:40:49 AM DMA32 zone 7671 pages used for memmap
09/30/15 09:40:49 AM DMA32 zone 490944 pages, LIFO batch:31
09/30/15 09:40:49 AM Normal zone 8192 pages used for memmap
09/30/15 09:40:49 AM Normal zone 524288 pages, LIFO batch:31
09/30/15 09:40:49 AM x86/hpet Will disable the HPET for this platform because it's not reliable
09/30/15 09:40:49 AM Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
09/30/15 09:40:49 AM ACPI PM-Timer IO Port: 0x408
09/30/15 09:40:49 AM ACPI Local APIC address 0xfee00000
09/30/15 09:40:49 AM ACPI LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
09/30/15 09:40:49 AM ACPI LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
09/30/15 09:40:49 AM ACPI LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
09/30/15 09:40:49 AM ACPI LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
09/30/15 09:40:49 AM IOAPIC[0] apic_id 2, version 32, address 0xfec00000, GSI 0-86
09/30/15 09:40:49 AM ACPI INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
09/30/15 09:40:49 AM ACPI INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
09/30/15 09:40:49 AM ACPI IRQ0 used by override.
09/30/15 09:40:49 AM ACPI IRQ9 used by override.
09/30/15 09:40:49 AM Using ACPI (MADT) for SMP configuration information
09/30/15 09:40:49 AM ACPI HPET id: 0x8086a201 base: 0xfed00000
09/30/15 09:40:49 AM smpboot Allowing 4 CPUs, 0 hotplug CPUs
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x00000000-0x00000fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x0009e000-0x0009efff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x0009f000-0x0009ffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x000a0000-0x000dffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x000e0000-0x000fffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x20000000-0x200fffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x781c1000-0x787c0fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x787c1000-0x788c0fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x788c1000-0x78900fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x794c5000-0x79dc4fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x7a000000-0x7a7fffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x7a800000-0x7adfffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x7ae00000-0x7fffffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0x80000000-0xdfffffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xe4000000-0xfebfffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfec00000-0xfec00fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfec01000-0xfed00fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed01000-0xfed01fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed02000-0xfed02fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed03000-0xfed03fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed04000-0xfed07fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed08000-0xfed08fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfee00000-0xfee00fff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfee01000-0xfeefffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xfef00000-0xfeffffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xff000000-0xffbfffff]
09/30/15 09:40:49 AM PM Registered nosave memory: [mem 0xffc00000-0xffffffff]
09/30/15 09:40:49 AM e820 [mem 0x80000000-0xdfffffff] available for PCI devices
09/30/15 09:40:49 AM Booting paravirtualized kernel on bare hardware
09/30/15 09:40:49 AM clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
09/30/15 09:40:49 AM setup_percpu NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
09/30/15 09:40:49 AM PERCPU Embedded 32 pages/cpu @ffff88017fc00000 s91480 r8192 d31400 u524288
09/30/15 09:40:49 AM pcpu-alloc s91480 r8192 d31400 u524288 alloc=1*2097152
09/30/15 09:40:49 AM pcpu-alloc [0] 0 1 2 3
09/30/15 09:40:49 AM Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003281
09/30/15 09:40:49 AM Policy zone Normal
09/30/15 09:40:49 AM Kernel command line BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1adb1c7b-a5a2-4d6d-9582-5438e276246f rw quiet clocksource=acpi_pm intel_pstate=disable
09/30/15 09:40:49 AM PID hash table entries: 4096 (order: 3, 32768 bytes)
09/30/15 09:40:49 AM Calgary detecting Calgary via BIOS EBDA area
09/30/15 09:40:49 AM Calgary Unable to locate Rio Grande table in EBDA - bailing!
09/30/15 09:40:49 AM Memory 3928072K/4076916K available (5590K kernel code, 922K rwdata, 1764K rodata, 1180K init, 1152K bss, 148844K reserved, 0K cma-reserved)
09/30/15 09:40:49 AM SLUB HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
09/30/15 09:40:49 AM Preemptible hierarchical RCU implementation.
09/30/15 09:40:49 AM Build-time adjustment of leaf fanout to 64.
09/30/15 09:40:49 AM RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
09/30/15 09:40:49 AM RCU Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
09/30/15 09:40:49 AM NR_IRQS 448 nr_irqs:1024 16
09/30/15 09:40:49 AM Console colour dummy device 80x25
09/30/15 09:40:49 AM console [tty0] enabled
09/30/15 09:40:49 AM Maximum core-clock to bus-clock ratio: 0x1a
09/30/15 09:40:49 AM Resolved frequency ID: 0, frequency: 83200 KHz
09/30/15 09:40:49 AM TSC runs at 2163200 KHz
09/30/15 09:40:49 AM lapic_timer_frequency = 277333
09/30/15 09:40:49 AM tsc Detected 2163.200 MHz processor
09/30/15 09:40:49 AM Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
09/30/15 09:40:49 AM pid_max default: 32768 minimum: 301
09/30/15 09:40:49 AM ACPI Core revision 20150619
09/30/15 09:40:49 AM ACPI All ACPI Tables successfully acquired
09/30/15 09:40:49 AM Security Framework initialized
09/30/15 09:40:49 AM Yama becoming mindful.
09/30/15 09:40:49 AM Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
09/30/15 09:40:49 AM Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
09/30/15 09:40:49 AM Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
09/30/15 09:40:49 AM Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
09/30/15 09:40:49 AM Initializing cgroup subsys blkio
09/30/15 09:40:49 AM Initializing cgroup subsys memory
09/30/15 09:40:49 AM Initializing cgroup subsys devices
09/30/15 09:40:49 AM Initializing cgroup subsys freezer
09/30/15 09:40:49 AM Initializing cgroup subsys net_cls
09/30/15 09:40:49 AM CPU Physical Processor ID: 0
09/30/15 09:40:49 AM CPU Processor Core ID: 0
09/30/15 09:40:49 AM ENERGY_PERF_BIAS Set to 'normal', was 'performance'
09/30/15 09:40:49 AM ENERGY_PERF_BIAS View and update with x86_energy_perf_policy(8)
09/30/15 09:40:49 AM mce CPU supports 6 MCE banks
09/30/15 09:40:49 AM CPU0 Thermal monitoring handled by SMI
09/30/15 09:40:49 AM process using mwait in idle threads
09/30/15 09:40:49 AM Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
09/30/15 09:40:49 AM Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
09/30/15 09:40:49 AM Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
09/30/15 09:40:49 AM ftrace allocating 22094 entries in 87 pages
09/30/15 09:40:49 AM ..TIMER vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
09/30/15 09:40:49 AM TSC deadline timer enabled
09/30/15 09:40:49 AM smpboot CPU0: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
09/30/15 09:40:49 AM Performance Events PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
09/30/15 09:40:49 AM ... version 3
09/30/15 09:40:49 AM ... bit width 40
09/30/15 09:40:49 AM ... generic registers: 2
09/30/15 09:40:49 AM ... value mask 000000ffffffffff
09/30/15 09:40:49 AM ... max period 000000ffffffffff
09/30/15 09:40:49 AM ... fixed-purpose events: 3
09/30/15 09:40:49 AM ... event mask 0000000700000003
09/30/15 09:40:49 AM x86 Booting SMP configuration:
09/30/15 09:40:49 AM .... node #0, CPUs #1
09/30/15 09:40:49 AM CPU1 Thermal monitoring handled by SMI
09/30/15 09:40:49 AM NMI watchdog enabled on all CPUs, permanently consumes one hw-PMU counter.
09/30/15 09:40:49 AM #2
09/30/15 09:40:49 AM CPU2 Thermal monitoring handled by SMI
09/30/15 09:40:49 AM #3
09/30/15 09:40:49 AM CPU3 Thermal monitoring handled by SMI
09/30/15 09:40:49 AM x86 Booted up 1 node, 4 CPUs
09/30/15 09:40:49 AM smpboot Total of 4 processors activated (17312.66 BogoMIPS)
09/30/15 09:40:49 AM devtmpfs initialized
09/30/15 09:40:49 AM PM Registering ACPI NVS region [mem 0x787c1000-0x788c0fff] (1048576 bytes)
09/30/15 09:40:49 AM PM Registering ACPI NVS region [mem 0x794c5000-0x79dc4fff] (9437184 bytes)
09/30/15 09:40:49 AM clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
09/30/15 09:40:49 AM pinctrl core initialized pinctrl subsystem
09/30/15 09:40:49 AM RTC time 7:40:49, date: 09/30/15
09/30/15 09:40:49 AM NET Registered protocol family 16
09/30/15 09:40:49 AM cpuidle using governor ladder
09/30/15 09:40:49 AM cpuidle using governor menu
09/30/15 09:40:49 AM ACPI bus type PCI registered
09/30/15 09:40:49 AM acpiphp ACPI Hot Plug PCI Controller Driver version: 0.5
09/30/15 09:40:49 AM PCI MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
09/30/15 09:40:49 AM PCI MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
09/30/15 09:40:49 AM PCI Using configuration type 1 for base access
09/30/15 09:40:49 AM ACPI Added _OSI(Module Device)
09/30/15 09:40:49 AM ACPI Added _OSI(Processor Device)
09/30/15 09:40:49 AM ACPI Added _OSI(3.0 _SCP Extensions)
09/30/15 09:40:49 AM ACPI Added _OSI(Processor Aggregator Device)
09/30/15 09:40:49 AM ACPI Dynamic OEM Table Load:
09/30/15 09:40:49 AM ACPI SSDT 0xFFFF88017A631800 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
09/30/15 09:40:49 AM ACPI Dynamic OEM Table Load:
09/30/15 09:40:49 AM ACPI SSDT 0xFFFF88017A632000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
09/30/15 09:40:49 AM ACPI Dynamic OEM Table Load:
09/30/15 09:40:49 AM ACPI SSDT 0xFFFF88017A6A0200 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
09/30/15 09:40:49 AM ACPI Dynamic OEM Table Load:
09/30/15 09:40:49 AM ACPI SSDT 0xFFFF88017A656780 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
09/30/15 09:40:49 AM ACPI EC: EC started
09/30/15 09:40:49 AM ACPI Interpreter enabled
09/30/15 09:40:49 AM ACPI Exception AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
09/30/15 09:40:49 AM ACPI Exception AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
09/30/15 09:40:49 AM ACPI (supports S0 S3 S4 S5)
09/30/15 09:40:49 AM ACPI Using IOAPIC for interrupt routing
09/30/15 09:40:49 AM PCI Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
09/30/15 09:40:49 AM ACPI Power Resource [USBC] (on)
09/30/15 09:40:49 AM ACPI Power Resource [PC05] (on)
09/30/15 09:40:49 AM ACPI PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
09/30/15 09:40:49 AM acpi PNP0A08 0: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
09/30/15 09:40:49 AM \_SB_.PCI0 OSC invalid UUID
09/30/15 09:40:49 AM _OSC request data 1f 0
09/30/15 09:40:49 AM acpi PNP0A08 0: _OSC failed (AE_ERROR); disabling ASPM
09/30/15 09:40:49 AM acpi PNP0A08 0: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
09/30/15 09:40:49 AM PCI host bridge to bus 0000:00
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [bus 00-ff]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [io 0x0070-0x0077]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [io 0x0000-0x006f window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [io 0x0078-0x0cf7 window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [io 0x0d00-0xffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [mem 0x000a0000-0x000bffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [mem 0x000c0000-0x000dffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [mem 0x000e0000-0x000fffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: root bus resource [mem 0x80000000-0x909ffffe window]
09/30/15 09:40:49 AM pci 0000 0:00.0: [8086:0f00] type 00 class 0x060000
09/30/15 09:40:49 AM pci 0000 0:02.0: [8086:0f31] type 00 class 0x030000
09/30/15 09:40:49 AM pci 0000 0:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
09/30/15 09:40:49 AM pci 0000 0:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
09/30/15 09:40:49 AM pci 0000 0:02.0: reg 0x20: [io 0x2050-0x2057]
09/30/15 09:40:49 AM pci 0000 0:13.0: [8086:0f23] type 00 class 0x010601
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x10: [io 0x2048-0x204f]
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x14: [io 0x205c-0x205f]
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x18: [io 0x2040-0x2047]
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x1c: [io 0x2058-0x205b]
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x20: [io 0x2020-0x203f]
09/30/15 09:40:49 AM pci 0000 0:13.0: reg 0x24: [mem 0x9091d000-0x9091d7ff]
09/30/15 09:40:49 AM pci 0000 0:13.0: PME# supported from D3hot
09/30/15 09:40:49 AM pci 0000 0:14.0: [8086:0f35] type 00 class 0x0c0330
09/30/15 09:40:49 AM pci 0000 0:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
09/30/15 09:40:49 AM pci 0000 0:14.0: PME# supported from D3hot D3cold
09/30/15 09:40:49 AM pci 0000 0:14.0: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1a.0: [8086:0f18] type 00 class 0x108000
09/30/15 09:40:49 AM pci 0000 0:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
09/30/15 09:40:49 AM pci 0000 0:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
09/30/15 09:40:49 AM pci 0000 0:1a.0: PME# supported from D0 D3hot
09/30/15 09:40:49 AM pci 0000 0:1b.0: [8086:0f04] type 00 class 0x040300
09/30/15 09:40:49 AM pci 0000 0:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
09/30/15 09:40:49 AM pci 0000 0:1b.0: PME# supported from D0 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 0:1c.0: [8086:0f48] type 01 class 0x060400
09/30/15 09:40:49 AM pci 0000 0:1c.0: PME# supported from D0 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 0:1c.0: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1c.1: [8086:0f4a] type 01 class 0x060400
09/30/15 09:40:49 AM pci 0000 0:1c.1: PME# supported from D0 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 0:1c.1: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1c.2: [8086:0f4c] type 01 class 0x060400
09/30/15 09:40:49 AM pci 0000 0:1c.2: PME# supported from D0 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 0:1c.2: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1f.0: [8086:0f1c] type 00 class 0x060100
09/30/15 09:40:49 AM pci 0000 0:1f.3: [8086:0f12] type 00 class 0x0c0500
09/30/15 09:40:49 AM pci 0000 0:1f.3: reg 0x10: [mem 0x90919000-0x9091901f]
09/30/15 09:40:49 AM pci 0000 0:1f.3: reg 0x20: [io 0x2000-0x201f]
09/30/15 09:40:49 AM pci 0000 0:1c.0: PCI bridge to [bus 01]
09/30/15 09:40:49 AM pci 0000 2:00.0: [14e4:4359] type 00 class 0x028000
09/30/15 09:40:49 AM pci 0000 2:00.0: reg 0x10: [mem 0x90600000-0x90603fff 64bit]
09/30/15 09:40:49 AM pci 0000 2:00.0: supports D1 D2
09/30/15 09:40:49 AM pci 0000 2:00.0: PME# supported from D0 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 2:00.0: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1c.1: PCI bridge to [bus 02]
09/30/15 09:40:49 AM pci 0000 0:1c.1: bridge window [mem 0x90600000-0x906fffff]
09/30/15 09:40:49 AM pci 0000 3:00.0: [10ec:8168] type 00 class 0x020000
09/30/15 09:40:49 AM pci 0000 3:00.0: reg 0x10: [io 0x1000-0x10ff]
09/30/15 09:40:49 AM pci 0000 3:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
09/30/15 09:40:49 AM pci 0000 3:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
09/30/15 09:40:49 AM pci 0000 3:00.0: supports D1 D2
09/30/15 09:40:49 AM pci 0000 3:00.0: PME# supported from D0 D1 D2 D3hot D3cold
09/30/15 09:40:49 AM pci 0000 3:00.0: System wakeup disabled by ACPI
09/30/15 09:40:49 AM pci 0000 0:1c.2: PCI bridge to [bus 03]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [io 0x1000-0x1fff]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [mem 0x90500000-0x905fffff]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
09/30/15 09:40:49 AM ACPI PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
09/30/15 09:40:49 AM ACPI Enabled 4 GPEs in block 00 to 3F
09/30/15 09:40:49 AM ACPI EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
09/30/15 09:40:49 AM vgaarb setting as boot device: PCI:0000:00:02.0
09/30/15 09:40:49 AM vgaarb device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
09/30/15 09:40:49 AM vgaarb loaded
09/30/15 09:40:49 AM vgaarb bridge control possible 0000:00:02.0
09/30/15 09:40:49 AM PCI Using ACPI for IRQ routing
09/30/15 09:40:49 AM PCI pci_cache_line_size set to 64 bytes
09/30/15 09:40:49 AM e820 reserve RAM buffer [mem 0x0009e800-0x0009ffff]
09/30/15 09:40:49 AM e820 reserve RAM buffer [mem 0x1f000000-0x1fffffff]
09/30/15 09:40:49 AM e820 reserve RAM buffer [mem 0x781c1000-0x7bffffff]
09/30/15 09:40:49 AM e820 reserve RAM buffer [mem 0x794c5000-0x7bffffff]
09/30/15 09:40:49 AM e820 reserve RAM buffer [mem 0x7a000000-0x7bffffff]
09/30/15 09:40:49 AM NetLabel Initializing
09/30/15 09:40:49 AM NetLabel domain hash size = 128
09/30/15 09:40:49 AM NetLabel protocols = UNLABELED CIPSOv4
09/30/15 09:40:49 AM NetLabel unlabeled traffic allowed by default
09/30/15 09:40:49 AM clocksource Switched to clocksource refined-jiffies
09/30/15 09:40:49 AM pnp PnP ACPI init
09/30/15 09:40:49 AM pnp 00 0: Plug and Play ACPI device, IDs PNP0b00 (active)
09/30/15 09:40:49 AM system 00 1: [io 0x0680-0x069f] has been reserved
09/30/15 09:40:49 AM system 00 1: [io 0x0400-0x047f] has been reserved
09/30/15 09:40:49 AM system 00 1: [io 0x0500-0x05fe] has been reserved
09/30/15 09:40:49 AM system 00 1: [io 0x0600-0x061f] has been reserved
09/30/15 09:40:49 AM system 00 1: [mem 0xfed40000-0xfed44fff] has been reserved
09/30/15 09:40:49 AM system 00 1: Plug and Play ACPI device, IDs PNP0c02 (active)
09/30/15 09:40:49 AM pnp 00 2: Plug and Play ACPI device, IDs PNP0303 (active)
09/30/15 09:40:49 AM system 00 3: [mem 0xe0000000-0xefffffff] could not be reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed01000-0xfed01fff] has been reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed03000-0xfed03fff] has been reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed04000-0xfed04fff] has been reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed0c000-0xfed0ffff] could not be reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed08000-0xfed08fff] has been reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfed1c000-0xfed1cfff] has been reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfee00000-0xfeefffff] could not be reserved
09/30/15 09:40:49 AM system 00 3: [mem 0xfef00000-0xfeffffff] has been reserved
09/30/15 09:40:49 AM system 00 3: Plug and Play ACPI device, IDs PNP0c02 (active)
09/30/15 09:40:49 AM pnp PnP ACPI: found 4 devices
09/30/15 09:40:49 AM clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
09/30/15 09:40:49 AM clocksource Switched to clocksource acpi_pm
09/30/15 09:40:49 AM pci 0000 0:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
09/30/15 09:40:49 AM pci 0000 0:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
09/30/15 09:40:49 AM pci 0000 0:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
09/30/15 09:40:49 AM pci 0000 0:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
09/30/15 09:40:49 AM pci 0000 0:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
09/30/15 09:40:49 AM pci 0000 0:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 14: no space for [mem size 0x00200000]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 14: failed to assign [mem size 0x00200000]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
09/30/15 09:40:49 AM pci 0000 0:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
09/30/15 09:40:49 AM pci 0000 0:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 14: no space for [mem size 0x00200000]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 14: failed to assign [mem size 0x00200000]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
09/30/15 09:40:49 AM pci 0000 0:1c.0: PCI bridge to [bus 01]
09/30/15 09:40:49 AM pci 0000 0:1c.0: bridge window [io 0x3000-0x3fff]
09/30/15 09:40:49 AM pci 0000 0:1c.1: PCI bridge to [bus 02]
09/30/15 09:40:49 AM pci 0000 0:1c.1: bridge window [io 0x4000-0x4fff]
09/30/15 09:40:49 AM pci 0000 0:1c.1: bridge window [mem 0x90600000-0x906fffff]
09/30/15 09:40:49 AM pci 0000 0:1c.2: PCI bridge to [bus 03]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [io 0x1000-0x1fff]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [mem 0x90500000-0x905fffff]
09/30/15 09:40:49 AM pci 0000 0:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 4 [io 0x0070-0x0077]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 5 [io 0x0000-0x006f window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 6 [io 0x0078-0x0cf7 window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 7 [io 0x0d00-0xffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 8 [mem 0x000a0000-0x000bffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 9 [mem 0x000c0000-0x000dffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 10 [mem 0x000e0000-0x000fffff window]
09/30/15 09:40:49 AM pci_bus 0000 0: resource 11 [mem 0x80000000-0x909ffffe window]
09/30/15 09:40:49 AM pci_bus 0000 1: resource 0 [io 0x3000-0x3fff]
09/30/15 09:40:49 AM pci_bus 0000 2: resource 0 [io 0x4000-0x4fff]
09/30/15 09:40:49 AM pci_bus 0000 2: resource 1 [mem 0x90600000-0x906fffff]
09/30/15 09:40:49 AM pci_bus 0000 3: resource 0 [io 0x1000-0x1fff]
09/30/15 09:40:49 AM pci_bus 0000 3: resource 1 [mem 0x90500000-0x905fffff]
09/30/15 09:40:49 AM pci_bus 0000 3: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
09/30/15 09:40:49 AM NET Registered protocol family 2
09/30/15 09:40:49 AM TCP established hash table entries: 32768 (order: 6, 262144 bytes)
09/30/15 09:40:49 AM TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
09/30/15 09:40:49 AM TCP Hash tables configured (established 32768 bind 32768)
09/30/15 09:40:49 AM UDP hash table entries: 2048 (order: 4, 65536 bytes)
09/30/15 09:40:49 AM UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
09/30/15 09:40:49 AM NET Registered protocol family 1
09/30/15 09:40:49 AM pci 0000 0:02.0: Video device with shadowed ROM
09/30/15 09:40:49 AM PCI CLS 64 bytes, default 64
09/30/15 09:40:49 AM Unpacking initramfs...
09/30/15 09:40:50 AM Freeing initrd memory: 4864K (ffff880037670000 - ffff880037b30000)
09/30/15 09:40:50 AM PCI-DMA Using software bounce buffering for IO (SWIOTLB)
09/30/15 09:40:50 AM software IO TLB [mem 0x741c1000-0x781c1000] (64MB) mapped at [ffff8800741c1000-ffff8800781c0fff]
09/30/15 09:40:50 AM microcode CPU0 sig=0x30678, pf=0x8, revision=0x829
09/30/15 09:40:50 AM microcode CPU1 sig=0x30678, pf=0x8, revision=0x829
09/30/15 09:40:50 AM microcode CPU2 sig=0x30678, pf=0x8, revision=0x829
09/30/15 09:40:50 AM microcode CPU3 sig=0x30678, pf=0x8, revision=0x829
09/30/15 09:40:50 AM microcode Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
09/30/15 09:40:50 AM Scanning for low memory corruption every 60 seconds
09/30/15 09:40:50 AM futex hash table entries: 1024 (order: 4, 65536 bytes)
09/30/15 09:40:50 AM Initialise system trusted keyring
09/30/15 09:40:50 AM HugeTLB registered 2 MB page size, pre-allocated 0 pages
09/30/15 09:40:50 AM zpool loaded
09/30/15 09:40:50 AM zbud loaded
09/30/15 09:40:50 AM VFS Disk quotas dquot_6.6.0
09/30/15 09:40:50 AM VFS Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
09/30/15 09:40:50 AM Key type big_key registered
09/30/15 09:40:50 AM Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
09/30/15 09:40:50 AM io scheduler noop registered
09/30/15 09:40:50 AM io scheduler deadline registered
09/30/15 09:40:50 AM io scheduler cfq registered (default)
09/30/15 09:40:50 AM pci_hotplug PCI Hot Plug PCI Core version: 0.5
09/30/15 09:40:50 AM pciehp PCI Express Hot Plug Controller Driver version: 0.4
09/30/15 09:40:50 AM efifb probing for efifb
09/30/15 09:40:50 AM efifb framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
09/30/15 09:40:50 AM efifb mode is 640x480x1, linelength=80, pages=1
09/30/15 09:40:50 AM efifb scrolling: redraw
09/30/15 09:40:50 AM efifb Truecolor: size=8:8:8:8, shift=24:16:8:0
09/30/15 09:40:50 AM Console switching to colour frame buffer device 80x30
09/30/15 09:40:50 AM fb0 EFI VGA frame buffer device
09/30/15 09:40:50 AM intel_idle MWAIT substates: 0x33000020
09/30/15 09:40:50 AM intel_idle v0.4 model 0x37
09/30/15 09:40:50 AM intel_idle lapic_timer_reliable_states 0xffffffff
09/30/15 09:40:50 AM GHES HEST is not enabled!
09/30/15 09:40:50 AM Serial 8250/16550 driver, 4 ports, IRQ sharing disabled
09/30/15 09:40:50 AM serial8250 ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
09/30/15 09:40:50 AM hpet number irqs doesn't agree with number of timers
09/30/15 09:40:50 AM Linux agpgart interface v0.103
09/30/15 09:40:50 AM rtc_cmos 00 0: RTC can wake from S4
09/30/15 09:40:50 AM rtc_cmos 00 0: rtc core: registered rtc_cmos as rtc0
09/30/15 09:40:50 AM rtc_cmos 00 0: alarms up to one month, y3k, 242 bytes nvram
09/30/15 09:40:50 AM ledtrig-cpu registered to indicate activity on CPUs
09/30/15 09:40:50 AM NET Registered protocol family 10
09/30/15 09:40:50 AM NET Registered protocol family 17
09/30/15 09:40:50 AM Loading compiled-in X.509 certificates
09/30/15 09:40:50 AM registered taskstats version 1
09/30/15 09:40:50 AM zswap loading zswap
09/30/15 09:40:50 AM zswap using zbud pool
09/30/15 09:40:50 AM zswap using lzo compressor
09/30/15 09:40:50 AM Magic number 15:147:674
09/30/15 09:40:50 AM hash matches drivers/base/power/main.c:611
09/30/15 09:40:50 AM rtc_cmos 00 0: setting system clock to 2015-09-30 07:40:49 UTC (1443598849)
09/30/15 09:40:50 AM PM Hibernation image not present or could not be loaded.
09/30/15 09:40:50 AM Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
09/30/15 09:40:50 AM Write protecting the kernel read-only data: 8192k
09/30/15 09:40:50 AM Freeing unused kernel memory: 544K (ffff880001578000 - ffff880001600000)
09/30/15 09:40:50 AM Freeing unused kernel memory: 284K (ffff8800017b9000 - ffff880001800000)
09/30/15 09:40:50 AM random systemd-tmpfile urandom read with 1 bits of entropy available
09/30/15 09:40:50 AM [drm] Initialized drm 1.1.0 20060810
09/30/15 09:40:50 AM input Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
09/30/15 09:40:50 AM ACPI Power Button [PWRB]
09/30/15 09:40:50 AM input Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
09/30/15 09:40:50 AM ACPI Sleep Button [SLPB]
09/30/15 09:40:50 AM input Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
09/30/15 09:40:50 AM ACPI Lid Switch [LID]
09/30/15 09:40:50 AM input Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
09/30/15 09:40:50 AM ACPI Power Button [PWRF]
09/30/15 09:40:50 AM [drm] Memory usable by graphics device = 2048M
09/30/15 09:40:50 AM checking generic (a0000 10000) vs hw (80000000 10000000)
09/30/15 09:40:50 AM fb switching to inteldrmfb from EFI VGA
09/30/15 09:40:50 AM Console switching to colour dummy device 80x25
09/30/15 09:40:50 AM [drm] Replacing VGA console driver
09/30/15 09:40:50 AM [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
09/30/15 09:40:50 AM [drm] Driver supports precise vblank timestamp query.
09/30/15 09:40:50 AM vgaarb device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
09/30/15 09:40:50 AM ACPI Video Device [GFX0] (multi-head: yes rom: no post: no)
09/30/15 09:40:50 AM input Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
09/30/15 09:40:50 AM [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
09/30/15 09:40:50 AM [drm rm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 122
09/30/15 09:40:50 AM Raw EDID
09/30/15 09:40:50 AM 00 ff ff ff ff ff ff 00 18 ac 77 40 53 33 4e 41
09/30/15 09:40:50 AM 33 16 01 03 80 33 1d 78 ea b9 67 a2 59 4f a1 26
09/30/15 09:40:50 AM 0d 50 74 a7 4f 00 71 4f 81 80 d1 c0 01 01 01 01
09/30/15 09:40:50 AM 01 01 01 01 01 01 03 3a 80 18 71 38 2d 40 58 2c
09/30/15 09:40:50 AM 47 00 fe 1f 11 00 00 1e 00 00 80 ff 00 59 4f 33
09/30/15 09:40:50 AM 4a 58 32 43 4f 41 4e 33 53 0b 00 00 00 fc 00 46
09/30/15 09:40:50 AM 47 4c 4c 30 78 b2 33 31 33 48 0e 20 80 80 00 fd
09/30/15 09:40:50 AM 00 b8 4c 1e 53 19 00 0f 30 30 b0 30 3f 30 80 ea
09/30/15 09:40:50 AM [drm rm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 118
09/30/15 09:40:50 AM Raw EDID
09/30/15 09:40:50 AM 00 ff ff ff ff ff ff 00 10 bc 77 40 73 33 4e 41
09/30/15 09:40:50 AM 33 1e 01 03 80 b3 1d 78 ea b9 67 a3 59 4f a1 36
09/30/15 09:40:50 AM 0d 50 d4 a7 4f 00 71 4f 81 80 d1 c0 01 01 01 01
09/30/15 09:40:50 AM 01 01 01 01 01 01 03 ba 80 98 71 38 2d 40 58 3c
09/30/15 09:40:50 AM 47 00 fe 1f 11 00 00 9e 00 80 80 ff 00 79 4e 33
09/30/15 09:40:50 AM 4e 58 32 43 4b 41 4e 33 53 0a 00 80 00 fc 00 66
09/30/15 09:40:50 AM e7 4c 4c 20 f0 b3 33 31 32 4c 0e 30 00 80 80 fd
09/30/15 09:40:50 AM 00 38 4c 1e 53 19 00 0f 30 30 b0 30 30 30 00 ea
09/30/15 09:40:50 AM [drm rm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 59
09/30/15 09:40:50 AM Raw EDID
09/30/15 09:40:50 AM 00 ff ff ff ff ff ff 00 18 ac 77 40 53 33 4e 41
09/30/15 09:40:50 AM 33 1e 01 03 80 b3 1d 78 ea b9 65 a3 59 4f a1 26
09/30/15 09:40:50 AM 0d 50 5c a7 4f 00 71 4f 81 80 d1 c0 01 01 01 01
09/30/15 09:40:50 AM 01 01 01 01 01 01 03 3a 80 18 71 38 3d 40 d8 2c
09/30/15 09:40:50 AM 47 00 fe 1f 11 00 80 9e 00 80 80 ff 00 59 4a 33
09/30/15 09:40:50 AM 4a 58 32 43 4b 41 4e 33 53 0f 00 00 00 fc 00 66
09/30/15 09:40:50 AM 47 6c 4c 30 d0 33 33 31 33 6c 0f 30 00 00 80 fd
09/30/15 09:40:50 AM 00 38 6c 1e 53 11 00 8f 30 20 30 30 30 30 80 ea
09/30/15 09:40:50 AM [drm rm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 121
09/30/15 09:40:50 AM Raw EDID
09/30/15 09:40:50 AM 00 ff ff ff ff ff ff 00 18 bc 77 40 73 33 4e 41
09/30/15 09:40:50 AM 33 16 01 03 80 b3 1d 78 ea b9 67 a2 59 4f a1 36
09/30/15 09:40:50 AM 0d 50 74 a7 4b 00 71 4f 81 80 d1 c0 81 01 01 01
09/30/15 09:40:50 AM 01 01 01 01 01 01 03 ba 80 98 71 38 3d 40 d8 2c
09/30/15 09:40:50 AM 65 00 fe 1f 11 00 00 1e 00 00 00 ff 00 59 4f 33
09/30/15 09:40:50 AM 4e 58 33 43 4b 41 4e 33 53 0a 00 80 00 fc 00 e6
09/30/15 09:40:50 AM c7 4c 4c 20 70 32 33 31 33 4c 0e 30 80 80 00 fd
09/30/15 09:40:50 AM 00 38 6c 1e 53 11 00 0f 20 30 b0 b0 30 b0 80 ea
09/30/15 09:40:50 AM i915 0000 0:02.0: HDMI-A-1: EDID block 0 invalid.
09/30/15 09:40:50 AM fbcon inteldrmfb (fb0) is primary device
09/30/15 09:40:51 AM tsc Refined TSC clocksource calibration: 2166.666 MHz
09/30/15 09:40:51 AM clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b3172f25, max_idle_ns: 440795274731 ns
09/30/15 09:40:52 AM Console switching to colour frame buffer device 170x48
09/30/15 09:40:52 AM i915 0000 0:02.0: fb0: inteldrmfb frame buffer device
09/30/15 09:40:52 AM i915 0000 0:02.0: registered panic notifier
09/30/15 09:40:52 AM i8042 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
09/30/15 09:40:52 AM i8042 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
09/30/15 09:40:52 AM serio i8042 KBD port at 0x60,0x64 irq 1
09/30/15 09:40:52 AM ACPI bus type USB registered
09/30/15 09:40:52 AM SCSI subsystem initialized
09/30/15 09:40:52 AM usbcore registered new interface driver usbfs
09/30/15 09:40:52 AM usbcore registered new interface driver hub
09/30/15 09:40:52 AM usbcore registered new device driver usb
09/30/15 09:40:52 AM libata version 3.00 loaded.
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: xHCI Host Controller
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: new USB bus registered, assigned bus number 1
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: cache line size of 64 is not supported
09/30/15 09:40:52 AM hub 1-0 .0: USB hub found
09/30/15 09:40:52 AM hub 1-0 .0: 6 ports detected
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: xHCI Host Controller
09/30/15 09:40:52 AM xhci_hcd 0000 0:14.0: new USB bus registered, assigned bus number 2
09/30/15 09:40:52 AM hub 2-0 .0: USB hub found
09/30/15 09:40:52 AM hub 2-0 .0: 1 port detected
09/30/15 09:40:52 AM ahci 0000 0:13.0: version 3.0
09/30/15 09:40:52 AM ahci 0000 0:13.0: controller can't do DEVSLP, turning off
09/30/15 09:40:52 AM ahci 0000 0:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
09/30/15 09:40:52 AM ahci 0000 0:13.0: flags: 64bit ncq pm led clo pio slum part deso
09/30/15 09:40:52 AM scsi host0 ahci
09/30/15 09:40:52 AM scsi host1 ahci
09/30/15 09:40:52 AM ata1 SATA max UDMA/133 abar m2048@0x9091d000 port 0x9091d100 irq 263
09/30/15 09:40:52 AM ata2 DUMMY
09/30/15 09:40:52 AM input AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
09/30/15 09:40:52 AM ata1 SATA link up 3.0 Gbps (SStatus 123 SControl 300)
09/30/15 09:40:52 AM ata1.00 ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
09/30/15 09:40:52 AM ata1.00 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
09/30/15 09:40:52 AM ata1.00 configured for UDMA/133
09/30/15 09:40:52 AM scsi 0 :0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
09/30/15 09:40:52 AM sd 0 :0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
09/30/15 09:40:52 AM sd 0 :0:0: [sda] Write Protect is off
09/30/15 09:40:52 AM sd 0 :0:0: [sda] Mode Sense: 00 3a 00 00
09/30/15 09:40:52 AM sd 0 :0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
09/30/15 09:40:52 AM sda sda1 sda2 sda3 sda4
09/30/15 09:40:52 AM sd 0 :0:0: [sda] Attached SCSI disk
09/30/15 09:40:52 AM usb 1-1 new full-speed USB device number 2 using xhci_hcd
09/30/15 09:40:52 AM EXT4-fs (sda1) mounted filesystem with ordered data mode. Opts: (null)
09/30/15 09:40:52 AM ip_tables (C) 2000-2006 Netfilter Core Team
09/30/15 09:40:52 AM systemd[1] systemd 226 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
09/30/15 09:40:52 AM systemd[1] Detected architecture x86-64.
09/30/15 09:40:52 AM systemd[1] Set hostname to <gluon>.
09/30/15 09:40:52 AM usb 1-2 new high-speed USB device number 3 using xhci_hcd
09/30/15 09:40:52 AM systemd[1] Listening on Journal Socket (/dev/log).
09/30/15 09:40:52 AM systemd[1] Reached target Login Prompts.
09/30/15 09:40:52 AM systemd[1] Listening on /dev/initctl Compatibility Named Pipe.
09/30/15 09:40:52 AM systemd[1] Listening on Journal Socket.
09/30/15 09:40:52 AM systemd[1] Started Forward Password Requests to Wall Directory Watch.
09/30/15 09:40:52 AM systemd[1] Listening on udev Kernel Socket.
09/30/15 09:40:52 AM systemd[1] Set up automount Arbitrary Executable File Formats File System Automount Point.
09/30/15 09:40:52 AM systemd[1] Listening on LVM2 metadata daemon socket.
09/30/15 09:40:52 AM systemd[1] Reached target Remote File Systems.
09/30/15 09:40:52 AM systemd[1] Listening on Device-mapper event daemon FIFOs.
09/30/15 09:40:52 AM systemd[1] Created slice User and Session Slice.
09/30/15 09:40:52 AM systemd[1] Started Dispatch Password Requests to Console Directory Watch.
09/30/15 09:40:52 AM systemd[1] Reached target Encrypted Volumes.
09/30/15 09:40:52 AM systemd[1] Listening on udev Control Socket.
09/30/15 09:40:52 AM systemd[1] Created slice System Slice.
09/30/15 09:40:52 AM systemd[1] Created slice system-getty.slice.
09/30/15 09:40:52 AM systemd[1] Starting Journal Service...
09/30/15 09:40:52 AM systemd[1] Created slice system-systemd\x2dfsck.slice.
09/30/15 09:40:52 AM systemd[1] Reached target Slices.
09/30/15 09:40:52 AM systemd[1] Starting Create list of required static device nodes for the current kernel...
09/30/15 09:40:52 AM systemd[1] Starting Set Up Additional Binary Formats...
09/30/15 09:40:52 AM systemd[1] Mounting Huge Pages File System...
09/30/15 09:40:52 AM systemd[1] Starting Setup Virtual Console...
09/30/15 09:40:52 AM systemd[1] Starting Remount Root and Kernel File Systems...
09/30/15 09:40:52 AM systemd[1] Mounting Debug File System...
09/30/15 09:40:52 AM systemd[1] Mounting POSIX Message Queue File System...
09/30/15 09:40:52 AM systemd[1] Starting Apply Kernel Variables...
09/30/15 09:40:52 AM EXT4-fs (sda1) re-mounted. Opts: discard,data=ordered,errors=remount-ro
09/30/15 09:40:52 AM systemd[1] Mounting Configuration File System...
09/30/15 09:40:52 AM systemd[1] Mounted Huge Pages File System.
09/30/15 09:40:52 AM systemd[1] Mounted Debug File System.
09/30/15 09:40:52 AM systemd[1] Mounted POSIX Message Queue File System.
09/30/15 09:40:52 AM systemd[1] Started Create list of required static device nodes for the current kernel.
09/30/15 09:40:52 AM systemd[1] Started Remount Root and Kernel File Systems.
09/30/15 09:40:52 AM systemd[1] Mounted Configuration File System.
09/30/15 09:40:52 AM systemd[1] proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 181 (systemd-binfmt)
09/30/15 09:40:52 AM systemd[1] Started Apply Kernel Variables.
09/30/15 09:40:52 AM systemd[1] Mounting Arbitrary Executable File Formats File System...
09/30/15 09:40:52 AM systemd[1] Starting udev Coldplug all Devices...
09/30/15 09:40:52 AM systemd[1] Starting Load/Save Random Seed...
09/30/15 09:40:53 AM systemd[1] Starting Create Static Device Nodes in /dev...
09/30/15 09:40:53 AM systemd[1] Mounted Arbitrary Executable File Formats File System.
09/30/15 09:40:53 AM systemd[1] Started Set Up Additional Binary Formats.
09/30/15 09:40:53 AM systemd[1] Started Load/Save Random Seed.
09/30/15 09:40:53 AM systemd[1] Started Create Static Device Nodes in /dev.
09/30/15 09:40:53 AM hub 1-2 .0: USB hub found
09/30/15 09:40:53 AM systemd[1] Starting udev Kernel Device Manager...
09/30/15 09:40:53 AM systemd[1] Reached target Local File Systems (Pre).
09/30/15 09:40:53 AM hub 1-2 .0: 4 ports detected
09/30/15 09:40:53 AM usb failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
09/30/15 09:40:53 AM usb 1-2-port1 failed to peer to usb2-port1 (-16)
09/30/15 09:40:53 AM usb port power management may be unreliable
09/30/15 09:40:53 AM usb failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
09/30/15 09:40:53 AM usb 1-2-port2 failed to peer to usb2-port1 (-16)
09/30/15 09:40:53 AM usb failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
09/30/15 09:40:53 AM usb 1-2-port3 failed to peer to usb2-port1 (-16)
09/30/15 09:40:53 AM usb failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
09/30/15 09:40:53 AM usb 1-2-port4 failed to peer to usb2-port1 (-16)
09/30/15 09:40:53 AM systemd[1] Mounting /tmp...
09/30/15 09:40:53 AM systemd[1] Mounted /tmp.
09/30/15 09:40:53 AM systemd[1] Started Setup Virtual Console.
09/30/15 09:40:53 AM systemd[1] Started udev Coldplug all Devices.
09/30/15 09:40:53 AM systemd[1] Started udev Kernel Device Manager.
09/30/15 09:40:53 AM usb 1-4 new high-speed USB device number 4 using xhci_hcd
09/30/15 09:40:53 AM ACPI AC Adapter [ACAD] (on-line)
09/30/15 09:40:53 AM systemd[1] Started Journal Service.
09/30/15 09:40:53 AM dw_dmac INTL9C60 1: DesignWare DMA Controller, 8 channels
09/30/15 09:40:53 AM systemd-journald[179]: Received request to flush runtime journal from PID 1
09/30/15 09:40:53 AM wmi Mapper loaded
09/30/15 09:40:53 AM ACPI Battery Slot [BAT1] (battery present)
09/30/15 09:40:53 AM hidraw raw HID events driver (C) Jiri Kosina
09/30/15 09:40:53 AM ------------[ cut here ]------------
09/30/15 09:40:53 AM WARNING CPU: 3 PID: 239 at drivers/cpufreq/cpufreq.c:2362 cpufreq_update_policy+0x190/0x1d0()
09/30/15 09:40:53 AM Modules linked in hid thermal(+) battery wmi i2c_designware_platform int3400_thermal i2c_designware_core processor_thermal_device dw_dmac intel_soc_dts_iosf acpi_thermal_rel dw_dmac_core iosf_mbi int3403_thermal int340x_thermal_zone spi_pxa2xx_platform ac evdev acpi_cpufreq mac_hid processor sch_fq_codel ip_tables x_tables ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci xhci_pci libata xhci_hcd usbcore scsi_mod usb_common i8042 serio i915 video button intel_gtt i2c_algo_bit drm_kms_helper drm
09/30/15 09:40:53 AM CPU 3 PID: 239 Comm: systemd-udevd Not tainted 4.2.1-1-ARCH #1
09/30/15 09:40:53 AM Hardware name Acer TravelMate B115-M/Roxy, BIOS V1.26 09/12/2014
09/30/15 09:40:53 AM 0000000000000000 00000000ab94b1fd ffff8800377ef648 ffffffff8156b77a
09/30/15 09:40:53 AM 0000000000000000 0000000000000000 ffff8800377ef688 ffffffff81074846
09/30/15 09:40:53 AM ffff880179a92e00 ffff880179a92e00 00000000fffffffb ffff880179a92f48
09/30/15 09:40:53 AM Call Trace
09/30/15 09:40:53 AM [<ffffffff8156b77a>] dump_stack+0x4c/0x6e
09/30/15 09:40:53 AM [<ffffffff81074846>] warn_slowpath_common+0x86/0xc0
09/30/15 09:40:53 AM [<ffffffff8107497a>] warn_slowpath_null+0x1a/0x20
09/30/15 09:40:53 AM [<ffffffff81428190>] cpufreq_update_policy+0x190/0x1d0
09/30/15 09:40:53 AM [<ffffffff814281d0>] ? cpufreq_update_policy+0x1d0/0x1d0
09/30/15 09:40:53 AM [<ffffffffa034376e>] cpufreq_set_cur_state.part.2+0x8b/0x95 [processor]
09/30/15 09:40:53 AM [<ffffffffa0343888>] processor_set_cur_state+0xa1/0xdb [processor]
09/30/15 09:40:53 AM [<ffffffff81421d4e>] thermal_cdev_update.part.6+0xbe/0x160
09/30/15 09:40:53 AM [<ffffffff81421e08>] thermal_cdev_update+0x18/0x20
09/30/15 09:40:53 AM [<ffffffff814249a6>] step_wise_throttle+0x56/0x90
09/30/15 09:40:53 AM [<ffffffff81421edd>] handle_thermal_trip+0x5d/0x1c0
09/30/15 09:40:53 AM [<ffffffff814220c0>] thermal_zone_device_update+0x70/0x150
09/30/15 09:40:53 AM [<ffffffff814234a8>] thermal_zone_device_register+0x818/0x910
09/30/15 09:40:53 AM [<ffffffffa038924e>] acpi_thermal_add+0x25a/0x430 [thermal]
09/30/15 09:40:53 AM [<ffffffff81338a14>] acpi_device_probe+0x50/0xf7
09/30/15 09:40:53 AM [<ffffffff813d4654>] driver_probe_device+0x1f4/0x460
09/30/15 09:40:53 AM [<ffffffff813d4950>] __driver_attach+0x90/0xa0
09/30/15 09:40:53 AM [<ffffffff813d48c0>] ? driver_probe_device+0x460/0x460
09/30/15 09:40:53 AM [<ffffffff813d227c>] bus_for_each_dev+0x6c/0xc0
09/30/15 09:40:53 AM [<ffffffff813d3e4e>] driver_attach+0x1e/0x20
09/30/15 09:40:53 AM [<ffffffff813d39ab>] bus_add_driver+0x1eb/0x280
09/30/15 09:40:53 AM [<ffffffffa03a6000>] ? 0xffffffffa03a6000
09/30/15 09:40:53 AM [<ffffffff813d5260>] driver_register+0x60/0xe0
09/30/15 09:40:53 AM [<ffffffff813392a7>] acpi_bus_register_driver+0x3b/0x43
09/30/15 09:40:53 AM [<ffffffffa03a6064>] acpi_thermal_init+0x64/0x1000 [thermal]
09/30/15 09:40:53 AM [<ffffffff81002123>] do_one_initcall+0xb3/0x200
09/30/15 09:40:53 AM [<ffffffff81197ba5>] ? __vunmap+0x95/0xf0
09/30/15 09:40:53 AM [<ffffffff811b427f>] ? kfree+0x14f/0x160
09/30/15 09:40:53 AM [<ffffffff8156ab0c>] do_init_module+0x60/0x1e7
09/30/15 09:40:53 AM [<ffffffff810f8b66>] load_module+0x2206/0x2850
09/30/15 09:40:53 AM [<ffffffff810f5900>] ? symbol_put_addr+0x40/0x40
09/30/15 09:40:53 AM [<ffffffff810f9304>] SyS_init_module+0x154/0x1a0
09/30/15 09:40:53 AM [<ffffffff81099ca2>] ? finish_task_switch+0x62/0x1b0
09/30/15 09:40:53 AM [<ffffffff81570cee>] entry_SYSCALL_64_fastpath+0x12/0x71
09/30/15 09:40:53 AM ---[ end trace 5456dc627ed75613 ]---
09/30/15 09:40:53 AM ------------[ cut here ]------------
09/30/15 09:40:53 AM WARNING CPU: 3 PID: 239 at drivers/cpufreq/cpufreq.c:2362 cpufreq_update_policy+0x190/0x1d0()
09/30/15 09:40:53 AM Modules linked in hid thermal(+) battery wmi i2c_designware_platform int3400_thermal i2c_designware_core processor_thermal_device dw_dmac intel_soc_dts_iosf acpi_thermal_rel dw_dmac_core iosf_mbi int3403_thermal int340x_thermal_zone spi_pxa2xx_platform ac evdev acpi_cpufreq mac_hid processor sch_fq_codel ip_tables x_tables ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci xhci_pci libata xhci_hcd usbcore scsi_mod usb_common i8042 serio i915 video button intel_gtt i2c_algo_bit drm_kms_helper drm
09/30/15 09:40:53 AM CPU 3 PID: 239 Comm: systemd-udevd Tainted: G W 4.2.1-1-ARCH #1
09/30/15 09:40:53 AM Hardware name Acer TravelMate B115-M/Roxy, BIOS V1.26 09/12/2014
09/30/15 09:40:53 AM 0000000000000000 00000000ab94b1fd ffff8800377ef648 ffffffff8156b77a
09/30/15 09:40:53 AM 0000000000000000 0000000000000000 ffff8800377ef688 ffffffff81074846
09/30/15 09:40:53 AM ffff880179a92e00 ffff880179a92e00 00000000fffffffb ffff880179a92f48
09/30/15 09:40:53 AM Call Trace
09/30/15 09:40:53 AM [<ffffffff8156b77a>] dump_stack+0x4c/0x6e
09/30/15 09:40:53 AM [<ffffffff81074846>] warn_slowpath_common+0x86/0xc0
09/30/15 09:40:53 AM [<ffffffff8107497a>] warn_slowpath_null+0x1a/0x20
09/30/15 09:40:53 AM [<ffffffff81428190>] cpufreq_update_policy+0x190/0x1d0
09/30/15 09:40:53 AM [<ffffffff814281d0>] ? cpufreq_update_policy+0x1d0/0x1d0
09/30/15 09:40:53 AM [<ffffffffa034376e>] cpufreq_set_cur_state.part.2+0x8b/0x95 [processor]
09/30/15 09:40:53 AM [<ffffffffa0343888>] processor_set_cur_state+0xa1/0xdb [processor]
09/30/15 09:40:53 AM [<ffffffff81421d4e>] thermal_cdev_update.part.6+0xbe/0x160
09/30/15 09:40:53 AM [<ffffffff81421e08>] thermal_cdev_update+0x18/0x20
09/30/15 09:40:53 AM [<ffffffff814249a6>] step_wise_throttle+0x56/0x90
09/30/15 09:40:53 AM [<ffffffff81421edd>] handle_thermal_trip+0x5d/0x1c0
09/30/15 09:40:53 AM [<ffffffff814220c0>] thermal_zone_device_update+0x70/0x150
09/30/15 09:40:53 AM [<ffffffff814234a8>] thermal_zone_device_register+0x818/0x910
09/30/15 09:40:53 AM [<ffffffffa038924e>] acpi_thermal_add+0x25a/0x430 [thermal]
09/30/15 09:40:53 AM [<ffffffff81338a14>] acpi_device_probe+0x50/0xf7
09/30/15 09:40:53 AM [<ffffffff813d4654>] driver_probe_device+0x1f4/0x460
09/30/15 09:40:53 AM [<ffffffff813d4950>] __driver_attach+0x90/0xa0
09/30/15 09:40:53 AM [<ffffffff813d48c0>] ? driver_probe_device+0x460/0x460
09/30/15 09:40:53 AM [<ffffffff813d227c>] bus_for_each_dev+0x6c/0xc0
09/30/15 09:40:53 AM [<ffffffff813d3e4e>] driver_attach+0x1e/0x20
09/30/15 09:40:53 AM [<ffffffff813d39ab>] bus_add_driver+0x1eb/0x280
09/30/15 09:40:53 AM [<ffffffffa03a6000>] ? 0xffffffffa03a6000
09/30/15 09:40:53 AM [<ffffffff813d5260>] driver_register+0x60/0xe0
09/30/15 09:40:53 AM [<ffffffff813392a7>] acpi_bus_register_driver+0x3b/0x43
09/30/15 09:40:53 AM [<ffffffffa03a6064>] acpi_thermal_init+0x64/0x1000 [thermal]
09/30/15 09:40:53 AM [<ffffffff81002123>] do_one_initcall+0xb3/0x200
09/30/15 09:40:53 AM [<ffffffff81197ba5>] ? __vunmap+0x95/0xf0
09/30/15 09:40:53 AM [<ffffffff811b427f>] ? kfree+0x14f/0x160
09/30/15 09:40:53 AM [<ffffffff8156ab0c>] do_init_module+0x60/0x1e7
09/30/15 09:40:53 AM [<ffffffff810f8b66>] load_module+0x2206/0x2850
09/30/15 09:40:53 AM [<ffffffff810f5900>] ? symbol_put_addr+0x40/0x40
09/30/15 09:40:53 AM [<ffffffff810f9304>] SyS_init_module+0x154/0x1a0
09/30/15 09:40:53 AM [<ffffffff81099ca2>] ? finish_task_switch+0x62/0x1b0
09/30/15 09:40:53 AM [<ffffffff81570cee>] entry_SYSCALL_64_fastpath+0x12/0x71
09/30/15 09:40:53 AM ---[ end trace 5456dc627ed75614 ]---
09/30/15 09:40:53 AM ------------[ cut here ]------------
09/30/15 09:40:53 AM WARNING CPU: 3 PID: 239 at drivers/cpufreq/cpufreq.c:2362 cpufreq_update_policy+0x190/0x1d0()
09/30/15 09:40:53 AM Modules linked in hid thermal(+) battery wmi i2c_designware_platform int3400_thermal i2c_designware_core processor_thermal_device dw_dmac intel_soc_dts_iosf acpi_thermal_rel dw_dmac_core iosf_mbi int3403_thermal int340x_thermal_zone spi_pxa2xx_platform ac evdev acpi_cpufreq mac_hid processor sch_fq_codel ip_tables x_tables ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci xhci_pci libata xhci_hcd usbcore scsi_mod usb_common i8042 serio i915 video button intel_gtt i2c_algo_bit drm_kms_helper drm
09/30/15 09:40:53 AM CPU 3 PID: 239 Comm: systemd-udevd Tainted: G W 4.2.1-1-ARCH #1
09/30/15 09:40:53 AM Hardware name Acer TravelMate B115-M/Roxy, BIOS V1.26 09/12/2014
09/30/15 09:40:53 AM 0000000000000000 00000000ab94b1fd ffff8800377ef648 ffffffff8156b77a
09/30/15 09:40:53 AM 0000000000000000 0000000000000000 ffff8800377ef688 ffffffff81074846
09/30/15 09:40:53 AM ffff880179a92e00 ffff880179a92e00 00000000fffffffb ffff880179a92f48
09/30/15 09:40:53 AM Call Trace
09/30/15 09:40:53 AM [<ffffffff8156b77a>] dump_stack+0x4c/0x6e
09/30/15 09:40:53 AM [<ffffffff81074846>] warn_slowpath_common+0x86/0xc0
09/30/15 09:40:53 AM [<ffffffff8107497a>] warn_slowpath_null+0x1a/0x20
09/30/15 09:40:53 AM [<ffffffff81428190>] cpufreq_update_policy+0x190/0x1d0
09/30/15 09:40:53 AM [<ffffffff814281d0>] ? cpufreq_update_policy+0x1d0/0x1d0
09/30/15 09:40:53 AM [<ffffffffa034376e>] cpufreq_set_cur_state.part.2+0x8b/0x95 [processor]
09/30/15 09:40:53 AM [<ffffffffa0343888>] processor_set_cur_state+0xa1/0xdb [processor]
09/30/15 09:40:53 AM [<ffffffff81421d4e>] thermal_cdev_update.part.6+0xbe/0x160
09/30/15 09:40:53 AM [<ffffffff81421e08>] thermal_cdev_update+0x18/0x20
09/30/15 09:40:53 AM [<ffffffff814249a6>] step_wise_throttle+0x56/0x90
09/30/15 09:40:53 AM [<ffffffff81421edd>] handle_thermal_trip+0x5d/0x1c0
09/30/15 09:40:53 AM [<ffffffff814220c0>] thermal_zone_device_update+0x70/0x150
09/30/15 09:40:53 AM [<ffffffff814234a8>] thermal_zone_device_register+0x818/0x910
09/30/15 09:40:53 AM [<ffffffffa038924e>] acpi_thermal_add+0x25a/0x430 [thermal]
09/30/15 09:40:53 AM [<ffffffff81338a14>] acpi_device_probe+0x50/0xf7
09/30/15 09:40:53 AM [<ffffffff813d4654>] driver_probe_device+0x1f4/0x460
09/30/15 09:40:53 AM [<ffffffff813d4950>] __driver_attach+0x90/0xa0
09/30/15 09:40:53 AM [<ffffffff813d48c0>] ? driver_probe_device+0x460/0x460
09/30/15 09:40:53 AM [<ffffffff813d227c>] bus_for_each_dev+0x6c/0xc0
09/30/15 09:40:53 AM [<ffffffff813d3e4e>] driver_attach+0x1e/0x20
09/30/15 09:40:53 AM [<ffffffff813d39ab>] bus_add_driver+0x1eb/0x280
09/30/15 09:40:53 AM [<ffffffffa03a6000>] ? 0xffffffffa03a6000
09/30/15 09:40:53 AM [<ffffffff813d5260>] driver_register+0x60/0xe0
09/30/15 09:40:53 AM [<ffffffff813392a7>] acpi_bus_register_driver+0x3b/0x43
09/30/15 09:40:53 AM [<ffffffffa03a6064>] acpi_thermal_init+0x64/0x1000 [thermal]
09/30/15 09:40:53 AM [<ffffffff81002123>] do_one_initcall+0xb3/0x200
09/30/15 09:40:53 AM [<ffffffff81197ba5>] ? __vunmap+0x95/0xf0
09/30/15 09:40:53 AM [<ffffffff811b427f>] ? kfree+0x14f/0x160
09/30/15 09:40:53 AM [<ffffffff8156ab0c>] do_init_module+0x60/0x1e7
09/30/15 09:40:53 AM [<ffffffff810f8b66>] load_module+0x2206/0x2850
09/30/15 09:40:53 AM [<ffffffff810f5900>] ? symbol_put_addr+0x40/0x40
09/30/15 09:40:53 AM [<ffffffff810f9304>] SyS_init_module+0x154/0x1a0
09/30/15 09:40:53 AM [<ffffffff81099ca2>] ? finish_task_switch+0x62/0x1b0
09/30/15 09:40:53 AM [<ffffffff81570cee>] entry_SYSCALL_64_fastpath+0x12/0x71
09/30/15 09:40:53 AM ---[ end trace 5456dc627ed75615 ]---
09/30/15 09:40:53 AM thermal LNXTHERM 0: registered as thermal_zone3
09/30/15 09:40:53 AM ACPI Thermal Zone [TZ01] (42 C)
09/30/15 09:40:53 AM input PC Speaker as /devices/platform/pcspkr/input/input6
09/30/15 09:40:53 AM ACPI Warning SystemIO range 0x0000000000002000-0x000000000000201F conflicts with OpRegion 0x0000000000002000-0x000000000000200F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
09/30/15 09:40:53 AM ACPI If an ACPI driver is available for this device, you should use it instead of the native driver
09/30/15 09:40:53 AM shpchp Standard Hot Plug PCI Controller Driver version: 0.4
09/30/15 09:40:53 AM r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
09/30/15 09:40:53 AM r8169 0000 3:00.0: can't disable ASPM; OS doesn't have ASPM control
09/30/15 09:40:53 AM r8169 0000 3:00.0 eth0: RTL8168g/8111g at 0xffffc9000065a000, c4:54:44:fd:dd:c5, XID 0c000800 IRQ 265
09/30/15 09:40:53 AM r8169 0000 3:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
09/30/15 09:40:53 AM snd_hda_intel 0000 0:1b.0: bound 0000:00:02.0 (ops i915_exit [i915])
09/30/15 09:40:53 AM Adding 2046972k swap on /dev/sda2. Priority:-1 extents:1 across:2046972k SSFS
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: inputs:
09/30/15 09:40:53 AM snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b
09/30/15 09:40:53 AM intel_rapl Found RAPL domain package
09/30/15 09:40:53 AM intel_rapl Found RAPL domain core
09/30/15 09:40:53 AM usb 1-2.1 new full-speed USB device number 5 using xhci_hcd
09/30/15 09:40:53 AM wl module license 'Mixed/Proprietary' taints kernel.
09/30/15 09:40:53 AM Disabling lock debugging due to kernel taint
09/30/15 09:40:53 AM acer_wmi Acer Laptop ACPI-WMI Extras
09/30/15 09:40:53 AM acer_wmi Function bitmap for Communication Button: 0x801
09/30/15 09:40:53 AM acer_wmi Enabling Launch Manager failed: 0xe4 - 0x0
09/30/15 09:40:53 AM input Acer WMI hotkeys as /devices/virtual/input/input8
09/30/15 09:40:53 AM input Acer BMA150 accelerometer as /devices/virtual/input/input9
09/30/15 09:40:53 AM iTCO_vendor_support vendor-support=0
09/30/15 09:40:53 AM iTCO_wdt Intel TCO WatchDog Timer Driver v1.11
09/30/15 09:40:53 AM iTCO_wdt Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
09/30/15 09:40:53 AM iTCO_wdt initialized. heartbeat=30 sec (nowayout=0)
09/30/15 09:40:53 AM i2c_hid i2c-SYN1B7D 1: failed to retrieve report from device.
09/30/15 09:40:53 AM i2c_hid i2c-SYN1B7D 1: failed to retrieve report from device.
09/30/15 09:40:53 AM i2c_hid i2c-SYN1B7D 1: failed to retrieve report from device.
09/30/15 09:40:53 AM r8169 0000 3:00.0 enp3s0: renamed from eth0
09/30/15 09:40:53 AM EXT4-fs (sda4) mounted filesystem with ordered data mode. Opts: discard
09/30/15 09:40:53 AM i2c_hid i2c-SYN1B7D 1: failed to retrieve report from device.
09/30/15 09:40:53 AM i2c_hid i2c-SYN1B7D 1: failed to retrieve report from device.
09/30/15 09:40:53 AM input SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-8/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input10
09/30/15 09:40:53 AM hid-multitouch 0018 6CB:2991.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
09/30/15 09:40:53 AM EXT4-fs (sda3) mounted filesystem with ordered data mode. Opts: discard
09/30/15 09:40:53 AM input HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
09/30/15 09:40:53 AM input HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
09/30/15 09:40:53 AM input HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
09/30/15 09:40:53 AM mousedev PS/2 mouse device common for all mice
09/30/15 09:40:53 AM wl0 online cpus 1
09/30/15 09:40:53 AM wlan0 Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
09/30/15 09:40:53 AM wl 0000 2:00.0 wlp2s0: renamed from wlan0
09/30/15 09:40:53 AM usb 1-2.2 new full-speed USB device number 6 using xhci_hcd
09/30/15 09:40:53 AM media Linux media interface: v0.10
09/30/15 09:40:53 AM usbcore registered new interface driver usbhid
09/30/15 09:40:53 AM usbhid USB HID core driver
09/30/15 09:40:53 AM Linux video capture interface: v2.00
09/30/15 09:40:53 AM logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
09/30/15 09:40:53 AM uvcvideo Found UVC 1.00 device HD WebCam (1bcf:2c57)
09/30/15 09:40:53 AM input HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14
09/30/15 09:40:53 AM usbcore registered new interface driver uvcvideo
09/30/15 09:40:53 AM USB Video Class driver (1.1.1)
09/30/15 09:40:53 AM random nonblocking pool is initialized
09/30/15 09:40:53 AM usb 1-2.3 new low-speed USB device number 7 using xhci_hcd
09/30/15 09:40:53 AM input Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4024.0007/input/input15
09/30/15 09:40:53 AM logitech-hidpp-device 0003:046D:4024.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-1:1
09/30/15 09:40:53 AM usb 1-2.3 ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
09/30/15 09:40:53 AM usb 1-2.3 ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
09/30/15 09:40:53 AM input Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C526.0005/input/input16
09/30/15 09:40:53 AM Bluetooth Core ver 2.20
09/30/15 09:40:53 AM NET Registered protocol family 31
09/30/15 09:40:53 AM Bluetooth HCI device and connection manager initialized
09/30/15 09:40:53 AM Bluetooth HCI socket layer initialized
09/30/15 09:40:53 AM Bluetooth L2CAP socket layer initialized
09/30/15 09:40:53 AM Bluetooth SCO socket layer initialized
09/30/15 09:40:53 AM usbcore registered new interface driver btusb
09/30/15 09:40:53 AM hid-generic 0003 46D:C526.0005: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2.2/input0
09/30/15 09:40:53 AM input Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C526.0006/input/input17
09/30/15 09:40:53 AM Bluetooth hci0: BCM: chip id 63
09/30/15 09:40:53 AM Bluetooth hci0: BCM20702A1 (001.002.014) build 0000
09/30/15 09:40:53 AM bluetooth hci0 Direct firmware load for brcm/BCM20702A1-0489-e046.hcd failed with error -2
09/30/15 09:40:53 AM Bluetooth hci0: BCM: Patch brcm/BCM20702A1-0489-e046.hcd not found
09/30/15 09:40:53 AM IPv6 ADDRCONF(NETDEV_UP): enp3s0: link is not ready
09/30/15 09:40:54 AM hid-generic 0003 46D:C526.0006: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.2/input1
09/30/15 09:40:54 AM input HID 046a:0021 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046A:0021.0008/input/input18
09/30/15 09:40:54 AM r8169 0000 3:00.0 enp3s0: link down
09/30/15 09:40:54 AM r8169 0000 3:00.0 enp3s0: link down
09/30/15 09:40:54 AM IPv6 ADDRCONF(NETDEV_UP): enp3s0: link is not ready
09/30/15 09:40:54 AM IPv6 ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
09/30/15 09:40:54 AM hid-generic 0003 46A:0021.0008: input,hidraw5: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:14.0-2.3/input0
09/30/15 09:40:54 AM input HID 046a:0021 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:046A:0021.0009/input/input19
09/30/15 09:40:54 AM hid-generic 0003 46A:0021.0009: input,hidraw6: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:14.0-2.3/input1
09/30/15 09:40:56 AM r8169 0000 3:00.0 enp3s0: link up
09/30/15 09:40:56 AM IPv6 ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
09/30/15 09:40:59 AM wl0 link up (wlp2s0)
09/30/15 09:40:59 AM QXcbEventReader[782]: segfault at 7f2083cd9ca9 ip 00007f2083cd9ca9 sp 00007f2081cd9de0 error 14 in locale-archive[7f208418a000+303000]
09/30/15 10:01:16 AM wl0 link up (wlp2s0)
09/30/15 10:01:16 AM ------------[ cut here ]------------
09/30/15 10:01:16 AM WARNING CPU: 1 PID: 315 at net/wireless/sme.c:850 cfg80211_roamed+0x86/0xa0 [cfg80211]()
09/30/15 10:01:16 AM Modules linked in btusb btrtl btbcm btintel bluetooth hid_generic hid_logitech_hidpp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common hid_logitech_dj videodev media usbhid mousedev snd_hda_codec_hdmi joydev hid_multitouch iTCO_wdt iTCO_vendor_support wl(PO) acer_wmi sparse_keymap intel_rapl intel_soc_dts_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic kvm_intel kvm snd_hda_intel cfg80211 snd_hda_codec crct10dif_pclmul crc32_pclmul crc32c_intel snd_hda_core ghash_clmulni_intel snd_hwdep snd_pcm input_leds rfkill cryptd r8169 mii led_class snd_timer mei_txe snd lpc_ich soundcore mei shpchp i2c_i801 serio_raw pcspkr i2c_hid hid thermal battery wmi i2c_designware_platform int3400_thermal i2c_designware_core processor_thermal_device dw_dmac
09/30/15 10:01:16 AM intel_soc_dts_iosf acpi_thermal_rel dw_dmac_core iosf_mbi int3403_thermal int340x_thermal_zone spi_pxa2xx_platform ac evdev acpi_cpufreq mac_hid processor sch_fq_codel ip_tables x_tables ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci xhci_pci libata xhci_hcd usbcore scsi_mod usb_common i8042 serio i915 video button intel_gtt i2c_algo_bit drm_kms_helper drm
09/30/15 10:01:16 AM CPU 1 PID: 315 Comm: wl_event_handle Tainted: P W O 4.2.1-1-ARCH #1
09/30/15 10:01:16 AM Hardware name Acer TravelMate B115-M/Roxy, BIOS V1.26 09/12/2014
09/30/15 10:01:16 AM 0000000000000000 00000000dc275981 ffff880073bcbda8 ffffffff8156b77a
09/30/15 10:01:16 AM 0000000000000000 0000000000000000 ffff880073bcbde8 ffffffff81074846
09/30/15 10:01:16 AM ffff8801771d4878 ffff88003747e000 ffff880165ffdd80 0000000000000095
09/30/15 10:01:16 AM Call Trace
09/30/15 10:01:16 AM [<ffffffff8156b77a>] dump_stack+0x4c/0x6e
09/30/15 10:01:16 AM [<ffffffff81074846>] warn_slowpath_common+0x86/0xc0
09/30/15 10:01:16 AM [<ffffffff8107497a>] warn_slowpath_null+0x1a/0x20
09/30/15 10:01:16 AM [<ffffffffa0525ee6>] cfg80211_roamed+0x86/0xa0 [cfg80211]
09/30/15 10:01:16 AM [<ffffffffa09aab05>] wl_notify_roaming_status+0xc5/0x140 [wl]
09/30/15 10:01:16 AM [<ffffffffa09a75a4>] wl_event_handler+0x64/0x1d0 [wl]
09/30/15 10:01:16 AM [<ffffffffa09a7540>] ? wl_deinit_priv_mem+0xa0/0xa0 [wl]
09/30/15 10:01:16 AM [<ffffffff81092518>] kthread+0xd8/0xf0
09/30/15 10:01:16 AM [<ffffffff8156d594>] ? preempt_schedule+0x24/0x30
09/30/15 10:01:16 AM [<ffffffff81092440>] ? kthread_worker_fn+0x170/0x170
09/30/15 10:01:16 AM [<ffffffff815710df>] ret_from_fork+0x3f/0x70
09/30/15 10:01:16 AM [<ffffffff81092440>] ? kthread_worker_fn+0x170/0x170
09/30/15 10:01:16 AM ---[ end trace 5456dc627ed75616 ]---
09/30/15 10:01:18 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:18 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:20 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:24 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:24 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:24 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:30 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:30 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:30 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:35 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:36 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:36 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:39 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:42 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:42 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:45 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:48 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:48 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:50 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:54 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:54 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:01:54 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:00 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:00 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:00 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:06 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:06 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:06 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:11 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:12 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:12 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:17 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:19 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:19 AM ERROR @wl_cfg80211_get_station : Wrong Mac address, mac = 24:b6:57:af:34:34 profile =58:bf:ea:41:d0:14
09/30/15 10:02:27 AM wl0 link up (wlp2s0) Information [ 4.376]
Information X.Org X Server 1.17.2
Information Release Date: 2015-06-16
Information [ 4.377] X Protocol Version 11, Revision 0
Information [ 4.377] Build Operating System: Linux 4.0.4-2-ARCH x86_64
Information [ 4.377] Current Operating System: Linux gluon 4.2.1-1-ARCH #1 SMP PREEMPT Tue Sep 22 06:57:07 CEST 2015 x86_64
Information [ 4.377] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1adb1c7b-a5a2-4d6d-9582-5438e276246f rw quiet clocksource=acpi_pm intel_pstate=disable
Information [ 4.377] Build Date: 17 July 2015 05:38:19PM
Information [ 4.377]
Information [ 4.377] Current version of pixman: 0.32.8
Information [ 4.377] Before reporting problems, check http://wiki.x.org
Information to make sure that you have the latest version.
Information [ 4.377] Markers: (--) probed, (**) from config file, (==) default setting,
Information (++) from command line, (!!) notice, (II) informational,
Information (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Information [ 4.377] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 30 09:40:53 2015
Information [ 4.419] (==) Using config directory: "/etc/X11/xorg.conf.d"
Information [ 4.419] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Information [ 4.425] (==) No Layout section. Using the first Screen section.
Information [ 4.425] (==) No screen section available. Using defaults.
Information [ 4.425] (**) |-->Screen "Default Screen Section" (0)
Information [ 4.425] (**) | |-->Monitor "<default monitor>"
Information [ 4.426] (==) No monitor specified for screen "Default Screen Section".
Information Using a default monitor configuration.
Information [ 4.426] (==) Automatically adding devices
Information [ 4.426] (==) Automatically enabling devices
Information [ 4.426] (==) Automatically adding GPU devices
Information [ 4.518] (==) FontPath set to:
Information /usr/share/fonts/misc/,
Information /usr/share/fonts/TTF/,
Information /usr/share/fonts/OTF/,
Information /usr/share/fonts/Type1/,
Information /usr/share/fonts/100dpi/,
Information /usr/share/fonts/75dpi/
Information [ 4.518] (==) ModulePath set to "/usr/lib/xorg/modules"
Information [ 4.518] (II) The server relies on udev to provide the list of input devices.
Information If no devices become available, reconfigure udev or disable AutoAddDevices.
Information [ 4.519] (II) Loader magic: 0x817d60
Information [ 4.519] (II) Module ABI versions:
Information [ 4.519] X.Org ANSI C Emulation: 0.4
Information [ 4.519] X.Org Video Driver: 19.0
Information [ 4.519] X.Org XInput driver : 21.1
Information [ 4.519] X.Org Server Extension : 9.0
Information [ 4.533] (EE) systemd-logind: failed to get session: PID 397 does not belong to any known session
Information [ 4.541] (II) xfree86: Adding drm device (/dev/dri/card0)
Information [ 4.545] (--) PCI:*(0:0:2:0) 8086:0f31:1025:0860 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8
Information [ 4.545] (II) Open ACPI successful (/var/run/acpid.socket)
Information [ 4.546] (II) LoadModule: "glx"
Information [ 4.556] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
Information [ 4.589] (II) Module glx: vendor="X.Org Foundation"
Information [ 4.589] compiled for 1.17.2, module version = 1.0.0
Information [ 4.589] ABI class: X.Org Server Extension, version 9.0
Information [ 4.589] (==) AIGLX enabled
Information [ 4.589] (==) Matched intel as autoconfigured driver 0
Information [ 4.589] (==) Matched intel as autoconfigured driver 1
Information [ 4.589] (==) Matched modesetting as autoconfigured driver 2
Information [ 4.589] (==) Matched fbdev as autoconfigured driver 3
Information [ 4.589] (==) Matched vesa as autoconfigured driver 4
Information [ 4.589] (==) Assigned the driver to the xf86ConfigLayout
Information [ 4.589] (II) LoadModule: "intel"
Information [ 4.589] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Information [ 4.603] (II) Module intel: vendor="X.Org Foundation"
Information [ 4.603] compiled for 1.17.2, module version = 2.99.917
Information [ 4.603] Module class: X.Org Video Driver
Information [ 4.603] ABI class: X.Org Video Driver, version 19.0
Information [ 4.603] (II) LoadModule: "modesetting"
Information [ 4.603] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
Information [ 4.605] (II) Module modesetting: vendor="X.Org Foundation"
Information [ 4.605] compiled for 1.17.2, module version = 1.17.2
Information [ 4.605] Module class: X.Org Video Driver
Information [ 4.605] ABI class: X.Org Video Driver, version 19.0
Information [ 4.605] (II) LoadModule: "fbdev"
Information [ 4.606] (WW) Warning, couldn't open module fbdev
Information [ 4.606] (II) UnloadModule: "fbdev"
Information [ 4.606] (II) Unloading fbdev
Information [ 4.606] (EE) Failed to load module "fbdev" (module does not exist, 0)
Information [ 4.606] (II) LoadModule: "vesa"
Information [ 4.606] (WW) Warning, couldn't open module vesa
Information [ 4.606] (II) UnloadModule: "vesa"
Information [ 4.606] (II) Unloading vesa
Information [ 4.606] (EE) Failed to load module "vesa" (module does not exist, 0)
Information [ 4.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
Information i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
Information 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Information Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Information GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
Information [ 4.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
Information [ 4.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
Information [ 4.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
Information [ 4.607] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
Information [ 4.607] (++) using VT number 1
Information
Information [ 4.609] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
Information [ 4.609] (II) intel(0): SNA compiled from 2.99.917-381-g5772556
Information [ 4.613] (WW) Falling back to old probe method for modesetting
Information [ 4.614] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
Information [ 4.614] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads
Information [ 4.614] (II) intel(0): Creating default Display subsection in Screen section
Information "Default Screen Section" for depth/fbbpp 24/32
Information [ 4.614] (==) intel(0): Depth 24, (--) framebuffer bpp 32
Information [ 4.614] (==) intel(0): RGB weight 888
Information [ 4.614] (==) intel(0): Default visual is TrueColor
Information [ 4.617] (II) intel(0): Output eDP1 has no monitor section
Information [ 4.630] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
Information [ 4.630] (II) intel(0): Enabled output eDP1
Information [ 4.630] (II) intel(0): Output HDMI1 has no monitor section
Information [ 4.630] (II) intel(0): Enabled output HDMI1
Information [ 4.630] (II) intel(0): Output DP1 has no monitor section
Information [ 4.630] (II) intel(0): Enabled output DP1
Information [ 4.630] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
Information [ 4.630] (II) intel(0): Output VIRTUAL1 has no monitor section
Information [ 4.630] (II) intel(0): Enabled output VIRTUAL1
Information [ 4.630] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
Information [ 4.630] (==) intel(0): TearFree disabled
Information [ 4.630] (==) intel(0): DPI set to (96, 96)
Information [ 4.630] (II) Loading sub module "dri2"
Information [ 4.630] (II) LoadModule: "dri2"
Information [ 4.630] (II) Module "dri2" already built-in
Information [ 4.630] (II) Loading sub module "present"
Information [ 4.630] (II) LoadModule: "present"
Information [ 4.630] (II) Module "present" already built-in
Information [ 4.631] (II) UnloadModule: "modesetting"
Information [ 4.631] (II) Unloading modesetting
Information [ 4.631] (==) Depth 24 pixmap format is 32 bpp
Information [ 4.637] (II) intel(0): SNA initialized with Baytrail (gen7) backend
Information [ 4.637] (==) intel(0): Backing store enabled
Information [ 4.637] (==) intel(0): Silken mouse enabled
Information [ 4.638] (II) intel(0): HW Cursor enabled
Information [ 4.638] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Information [ 4.639] (==) intel(0): DPMS enabled
Information [ 4.640] (==) intel(0): Display hotplug detection enabled
Information [ 4.640] (II) intel(0): [DRI2] Setup complete
Information [ 4.640] (II) intel(0): [DRI2] DRI driver: i965
Information [ 4.640] (II) intel(0): [DRI2] VDPAU driver: va_gl
Information [ 4.640] (II) intel(0): direct rendering: DRI2 enabled
Information [ 4.640] (II) intel(0): hardware support for Present enabled
Information [ 4.640] (--) RandR disabled
Information [ 4.703] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
Information [ 4.703] (II) AIGLX: enabled GLX_ARB_create_context
Information [ 4.703] (II) AIGLX: enabled GLX_ARB_create_context_profile
Information [ 4.703] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
Information [ 4.703] (II) AIGLX: enabled GLX_INTEL_swap_event
Information [ 4.703] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
Information [ 4.703] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
Information [ 4.703] (II) AIGLX: enabled GLX_ARB_fbconfig_float
Information [ 4.703] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
Information [ 4.703] (II) AIGLX: enabled GLX_ARB_create_context_robustness
Information [ 4.704] (II) AIGLX: Loaded and initialized i965
Information [ 4.704] (II) GLX: Initialized DRI2 GL provider for screen 0
Information [ 4.710] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
Information [ 4.710] (II) intel(0): Setting screen physical size to 361 x 203
Information [ 4.860] (II) config/udev: Adding input device Power Button (/dev/input/event3)
Information [ 4.860] (**) Power Button: Applying InputClass "evdev keyboard catchall"
Information [ 4.860] (**) Power Button: Applying InputClass "system-keyboard"
Information [ 4.860] (II) LoadModule: "evdev"
Information [ 4.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
Information [ 4.869] (II) Module evdev: vendor="X.Org Foundation"
Information [ 4.869] compiled for 1.17.1, module version = 2.9.2
Information [ 4.869] Module class: X.Org XInput Driver
Information [ 4.869] ABI class: X.Org XInput driver, version 21.0
Information [ 4.869] (II) Using input driver 'evdev' for 'Power Button'
Information [ 4.869] (**) Power Button: always reports core events
Information [ 4.869] (**) evdev: Power Button: Device: "/dev/input/event3"
Information [ 4.869] (--) evdev: Power Button: Vendor 0 Product 0x1
Information [ 4.869] (--) evdev: Power Button: Found keys
Information [ 4.869] (II) evdev: Power Button: Configuring as keyboard
Information [ 4.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
Information [ 4.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
Information [ 4.869] (**) Option "xkb_rules" "evdev"
Information [ 4.869] (**) Option "xkb_model" "pc104"
Information [ 4.869] (**) Option "xkb_layout" "de"
Information [ 4.924] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
Information [ 4.924] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
Information [ 4.924] (**) Video Bus: Applying InputClass "system-keyboard"
Information [ 4.924] (II) Using input driver 'evdev' for 'Video Bus'
Information [ 4.924] (**) Video Bus: always reports core events
Information [ 4.924] (**) evdev: Video Bus: Device: "/dev/input/event4"
Information [ 4.924] (--) evdev: Video Bus: Vendor 0 Product 0x6
Information [ 4.924] (--) evdev: Video Bus: Found keys
Information [ 4.924] (II) evdev: Video Bus: Configuring as keyboard
Information [ 4.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
Information [ 4.924] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
Information [ 4.924] (**) Option "xkb_rules" "evdev"
Information [ 4.924] (**) Option "xkb_model" "pc104"
Information [ 4.924] (**) Option "xkb_layout" "de"
Information [ 4.925] (II) config/udev: Adding input device Power Button (/dev/input/event0)
Information [ 4.926] (**) Power Button: Applying InputClass "evdev keyboard catchall"
Information [ 4.926] (**) Power Button: Applying InputClass "system-keyboard"
Information [ 4.926] (II) Using input driver 'evdev' for 'Power Button'
Information [ 4.926] (**) Power Button: always reports core events
Information [ 4.926] (**) evdev: Power Button: Device: "/dev/input/event0"
Information [ 4.926] (--) evdev: Power Button: Vendor 0 Product 0x1
Information [ 4.926] (--) evdev: Power Button: Found keys
Information [ 4.926] (II) evdev: Power Button: Configuring as keyboard
Information [ 4.926] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
Information [ 4.926] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
Information [ 4.926] (**) Option "xkb_rules" "evdev"
Information [ 4.926] (**) Option "xkb_model" "pc104"
Information [ 4.926] (**) Option "xkb_layout" "de"
Information [ 4.927] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
Information [ 4.927] (II) No input driver specified, ignoring this device.
Information [ 4.927] (II) This device may have been added with another device file.
Information [ 4.928] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
Information [ 4.928] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
Information [ 4.928] (**) Sleep Button: Applying InputClass "system-keyboard"
Information [ 4.928] (II) Using input driver 'evdev' for 'Sleep Button'
Information [ 4.928] (**) Sleep Button: always reports core events
Information [ 4.928] (**) evdev: Sleep Button: Device: "/dev/input/event1"
Information [ 4.928] (--) evdev: Sleep Button: Vendor 0 Product 0x3
Information [ 4.928] (--) evdev: Sleep Button: Found keys
Information [ 4.928] (II) evdev: Sleep Button: Configuring as keyboard
Information [ 4.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
Information [ 4.929] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
Information [ 4.929] (**) Option "xkb_rules" "evdev"
Information [ 4.929] (**) Option "xkb_model" "pc104"
Information [ 4.929] (**) Option "xkb_layout" "de"
Information [ 4.931] (II) config/udev: Adding input device Logitech K400 (/dev/input/event14)
Information [ 4.931] (**) Logitech K400: Applying InputClass "evdev pointer catchall"
Information [ 4.931] (**) Logitech K400: Applying InputClass "evdev keyboard catchall"
Information [ 4.931] (**) Logitech K400: Applying InputClass "system-keyboard"
Information [ 4.931] (II) Using input driver 'evdev' for 'Logitech K400'
Information [ 4.931] (**) Logitech K400: always reports core events
Information [ 4.931] (**) evdev: Logitech K400: Device: "/dev/input/event14"
Information [ 4.931] (--) evdev: Logitech K400: Vendor 0x46d Product 0x4024
Information [ 4.931] (--) evdev: Logitech K400: Found 20 mouse buttons
Information [ 4.932] (--) evdev: Logitech K400: Found scroll wheel(s)
Information [ 4.932] (--) evdev: Logitech K400: Found relative axes
Information [ 4.932] (--) evdev: Logitech K400: Found x and y relative axes
Information [ 4.932] (--) evdev: Logitech K400: Found absolute axes
Information [ 4.932] (II) evdev: Logitech K400: Forcing absolute x/y axes to exist.
Information [ 4.932] (--) evdev: Logitech K400: Found keys
Information [ 4.932] (II) evdev: Logitech K400: Configuring as mouse
Information [ 4.932] (II) evdev: Logitech K400: Configuring as keyboard
Information [ 4.932] (II) evdev: Logitech K400: Adding scrollwheel support
Information [ 4.932] (**) evdev: Logitech K400: YAxisMapping: buttons 4 and 5
Information [ 4.932] (**) evdev: Logitech K400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 4.932] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0004/0003:046D:4024.0007/input/input15/event14"
Information [ 4.932] (II) XINPUT: Adding extended input device "Logitech K400" (type: KEYBOARD, id 10)
Information [ 4.932] (**) Option "xkb_rules" "evdev"
Information [ 4.932] (**) Option "xkb_model" "pc104"
Information [ 4.932] (**) Option "xkb_layout" "de"
Information [ 4.932] (II) evdev: Logitech K400: initialized for relative axes.
Information [ 4.932] (WW) evdev: Logitech K400: ignoring absolute axes.
Information [ 4.933] (**) Logitech K400: (accel) keeping acceleration scheme 1
Information [ 4.933] (**) Logitech K400: (accel) acceleration profile 0
Information [ 4.933] (**) Logitech K400: (accel) acceleration factor: 2.000
Information [ 4.933] (**) Logitech K400: (accel) acceleration threshold: 4
Information [ 4.934] (II) config/udev: Adding input device Logitech K400 (/dev/input/mouse1)
Information [ 4.934] (**) Logitech K400: Applying InputClass "system-keyboard"
Information [ 4.934] (II) No input driver specified, ignoring this device.
Information [ 4.934] (II) This device may have been added with another device file.
Information [ 4.935] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15)
Information [ 4.935] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
Information [ 4.935] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
Information [ 4.935] (**) Logitech USB Receiver: always reports core events
Information [ 4.935] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event15"
Information [ 4.987] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
Information [ 4.987] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
Information [ 4.987] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
Information [ 4.987] (--) evdev: Logitech USB Receiver: Found relative axes
Information [ 4.987] (--) evdev: Logitech USB Receiver: Found x and y relative axes
Information [ 4.987] (II) evdev: Logitech USB Receiver: Configuring as mouse
Information [ 4.987] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
Information [ 4.987] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
Information [ 4.988] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 4.988] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C526.0005/input/input16/event15"
Information [ 4.988] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
Information [ 4.988] (II) evdev: Logitech USB Receiver: initialized for relative axes.
Information [ 4.989] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
Information [ 4.989] (**) Logitech USB Receiver: (accel) acceleration profile 0
Information [ 4.990] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Information [ 4.990] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Information [ 4.993] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
Information [ 4.994] (II) No input driver specified, ignoring this device.
Information [ 4.994] (II) This device may have been added with another device file.
Information [ 4.995] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event16)
Information [ 4.995] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
Information [ 4.995] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
Information [ 4.995] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
Information [ 4.995] (**) Logitech USB Receiver: always reports core events
Information [ 4.995] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event16"
Information [ 4.996] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
Information [ 4.996] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
Information [ 4.996] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
Information [ 4.996] (--) evdev: Logitech USB Receiver: Found relative axes
Information [ 4.996] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
Information [ 4.996] (--) evdev: Logitech USB Receiver: Found absolute axes
Information [ 4.996] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
Information [ 4.996] (--) evdev: Logitech USB Receiver: Found keys
Information [ 4.996] (II) evdev: Logitech USB Receiver: Configuring as mouse
Information [ 4.996] (II) evdev: Logitech USB Receiver: Configuring as keyboard
Information [ 4.996] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
Information [ 4.996] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
Information [ 4.996] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 4.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C526.0006/input/input17/event16"
Information [ 4.996] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
Information [ 4.996] (**) Option "xkb_rules" "evdev"
Information [ 4.996] (**) Option "xkb_model" "pc104"
Information [ 4.996] (**) Option "xkb_layout" "de"
Information [ 4.997] (II) evdev: Logitech USB Receiver: initialized for relative axes.
Information [ 4.997] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
Information [ 4.997] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
Information [ 4.997] (**) Logitech USB Receiver: (accel) acceleration profile 0
Information [ 4.997] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Information [ 4.997] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Information [ 4.999] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event17)
Information [ 4.999] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall"
Information [ 4.999] (**) HID 046a:0021: Applying InputClass "system-keyboard"
Information [ 4.999] (II) Using input driver 'evdev' for 'HID 046a:0021'
Information [ 4.999] (**) HID 046a:0021: always reports core events
Information [ 4.999] (**) evdev: HID 046a:0021: Device: "/dev/input/event17"
Information [ 4.999] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21
Information [ 4.999] (--) evdev: HID 046a:0021: Found keys
Information [ 4.999] (II) evdev: HID 046a:0021: Configuring as keyboard
Information [ 4.999] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046A:0021.0008/input/input18/event17"
Information [ 4.999] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 13)
Information [ 4.999] (**) Option "xkb_rules" "evdev"
Information [ 4.999] (**) Option "xkb_model" "pc104"
Information [ 4.999] (**) Option "xkb_layout" "de"
Information [ 5.001] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event18)
Information [ 5.001] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall"
Information [ 5.001] (**) HID 046a:0021: Applying InputClass "system-keyboard"
Information [ 5.002] (II) Using input driver 'evdev' for 'HID 046a:0021'
Information [ 5.002] (**) HID 046a:0021: always reports core events
Information [ 5.002] (**) evdev: HID 046a:0021: Device: "/dev/input/event18"
Information [ 5.002] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21
Information [ 5.002] (--) evdev: HID 046a:0021: Found 1 mouse buttons
Information [ 5.002] (--) evdev: HID 046a:0021: Found scroll wheel(s)
Information [ 5.002] (--) evdev: HID 046a:0021: Found relative axes
Information [ 5.002] (II) evdev: HID 046a:0021: Forcing relative x/y axes to exist.
Information [ 5.002] (--) evdev: HID 046a:0021: Found absolute axes
Information [ 5.002] (II) evdev: HID 046a:0021: Forcing absolute x/y axes to exist.
Information [ 5.002] (--) evdev: HID 046a:0021: Found keys
Information [ 5.002] (II) evdev: HID 046a:0021: Configuring as mouse
Information [ 5.002] (II) evdev: HID 046a:0021: Configuring as keyboard
Information [ 5.002] (II) evdev: HID 046a:0021: Adding scrollwheel support
Information [ 5.002] (**) evdev: HID 046a:0021: YAxisMapping: buttons 4 and 5
Information [ 5.002] (**) evdev: HID 046a:0021: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 5.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:046A:0021.0009/input/input19/event18"
Information [ 5.002] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 14)
Information [ 5.002] (**) Option "xkb_rules" "evdev"
Information [ 5.002] (**) Option "xkb_model" "pc104"
Information [ 5.002] (**) Option "xkb_layout" "de"
Information [ 5.003] (II) evdev: HID 046a:0021: initialized for relative axes.
Information [ 5.003] (WW) evdev: HID 046a:0021: ignoring absolute axes.
Information [ 5.004] (**) HID 046a:0021: (accel) keeping acceleration scheme 1
Information [ 5.004] (**) HID 046a:0021: (accel) acceleration profile 0
Information [ 5.004] (**) HID 046a:0021: (accel) acceleration factor: 2.000
Information [ 5.004] (**) HID 046a:0021: (accel) acceleration threshold: 4
Information [ 5.005] (II) config/udev: Adding input device HD WebCam (/dev/input/event13)
Information [ 5.005] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
Information [ 5.005] (**) HD WebCam: Applying InputClass "system-keyboard"
Information [ 5.005] (II) Using input driver 'evdev' for 'HD WebCam'
Information [ 5.005] (**) HD WebCam: always reports core events
Information [ 5.005] (**) evdev: HD WebCam: Device: "/dev/input/event13"
Information [ 5.005] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c57
Information [ 5.005] (--) evdev: HD WebCam: Found keys
Information [ 5.005] (II) evdev: HD WebCam: Configuring as keyboard
Information [ 5.005] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14/event13"
Information [ 5.005] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 15)
Information [ 5.005] (**) Option "xkb_rules" "evdev"
Information [ 5.005] (**) Option "xkb_model" "pc104"
Information [ 5.005] (**) Option "xkb_layout" "de"
Information [ 5.006] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
Information [ 5.006] (II) No input driver specified, ignoring this device.
Information [ 5.006] (II) This device may have been added with another device file.
Information [ 5.007] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
Information [ 5.007] (II) No input driver specified, ignoring this device.
Information [ 5.007] (II) This device may have been added with another device file.
Information [ 5.007] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
Information [ 5.007] (II) No input driver specified, ignoring this device.
Information [ 5.007] (II) This device may have been added with another device file.
Information [ 5.008] (II) config/udev: Adding input device SYN1B7D:01 06CB:2991 UNKNOWN (/dev/input/event9)
Information [ 5.008] (**) SYN1B7D:01 06CB:2991 UNKNOWN: Applying InputClass "evdev touchpad catchall"
Information [ 5.008] (**) SYN1B7D:01 06CB:2991 UNKNOWN: Applying InputClass "touchpad catchall"
Information [ 5.008] (**) SYN1B7D:01 06CB:2991 UNKNOWN: Applying InputClass "Default clickpad buttons"
Information [ 5.008] (II) LoadModule: "synaptics"
Information [ 5.009] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
Information [ 5.010] (II) Module synaptics: vendor="X.Org Foundation"
Information [ 5.010] compiled for 1.17.1, module version = 1.8.2
Information [ 5.010] Module class: X.Org XInput Driver
Information [ 5.010] ABI class: X.Org XInput driver, version 21.0
Information [ 5.010] (II) Using input driver 'synaptics' for 'SYN1B7D:01 06CB:2991 UNKNOWN'
Information [ 5.010] (**) SYN1B7D:01 06CB:2991 UNKNOWN: always reports core events
Information [ 5.010] (**) Option "Device" "/dev/input/event9"
Information [ 5.092] (II) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: found clickpad property
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: x-axis range 0 - 1223 (res 12)
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: y-axis range 0 - 684 (res 12)
Information [ 5.092] (II) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: device does not report pressure, will use touch data.
Information [ 5.092] (II) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: device does not report finger width.
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: buttons: left double triple
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: Vendor 0x6cb Product 0x2991
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: invalid pressure range. defaulting to 0 - 255
Information [ 5.092] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: invalid finger width range. defaulting to 0 - 15
Information [ 5.092] (**) Option "TapButton1" "1"
Information [ 5.092] (**) Option "TapButton2" "2"
Information [ 5.093] (**) Option "TapButton3" "3"
Information [ 5.093] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Information [ 5.094] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: touchpad found
Information [ 5.094] (**) SYN1B7D:01 06CB:2991 UNKNOWN: always reports core events
Information [ 5.124] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:00/i2c-8/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input10/event9"
Information [ 5.124] (II) XINPUT: Adding extended input device "SYN1B7D:01 06CB:2991 UNKNOWN" (type: TOUCHPAD, id 16)
Information [ 5.124] (**) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
Information [ 5.124] (**) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: (accel) MaxSpeed is now 1.75
Information [ 5.125] (**) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: (accel) AccelFactor is now 0.143
Information [ 5.126] (**) SYN1B7D:01 06CB:2991 UNKNOWN: (accel) keeping acceleration scheme 1
Information [ 5.127] (**) SYN1B7D:01 06CB:2991 UNKNOWN: (accel) acceleration profile 1
Information [ 5.127] (**) SYN1B7D:01 06CB:2991 UNKNOWN: (accel) acceleration factor: 2.000
Information [ 5.127] (**) SYN1B7D:01 06CB:2991 UNKNOWN: (accel) acceleration threshold: 4
Information [ 5.129] (--) synaptics: SYN1B7D:01 06CB:2991 UNKNOWN: touchpad found
Information [ 5.132] (II) config/udev: Adding input device SYN1B7D:01 06CB:2991 UNKNOWN (/dev/input/mouse0)
Information [ 5.132] (**) SYN1B7D:01 06CB:2991 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
Information [ 5.134] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
Information [ 5.134] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
Information [ 5.134] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
Information [ 5.134] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
Information [ 5.134] (**) AT Translated Set 2 keyboard: always reports core events
Information [ 5.134] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
Information [ 5.135] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
Information [ 5.135] (--) evdev: AT Translated Set 2 keyboard: Found keys
Information [ 5.135] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
Information [ 5.135] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
Information [ 5.135] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
Information [ 5.135] (**) Option "xkb_rules" "evdev"
Information [ 5.135] (**) Option "xkb_model" "pc104"
Information [ 5.135] (**) Option "xkb_layout" "de"
Information [ 5.136] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
Information [ 5.136] (II) No input driver specified, ignoring this device.
Information [ 5.136] (II) This device may have been added with another device file.
Information [ 5.137] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7)
Information [ 5.137] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
Information [ 5.137] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
Information [ 5.137] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
Information [ 5.137] (**) Acer WMI hotkeys: always reports core events
Information [ 5.137] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7"
Information [ 5.138] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
Information [ 5.138] (--) evdev: Acer WMI hotkeys: Found keys
Information [ 5.138] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
Information [ 5.138] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
Information [ 5.138] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 18)
Information [ 5.138] (**) Option "xkb_rules" "evdev"
Information [ 5.138] (**) Option "xkb_model" "pc104"
Information [ 5.138] (**) Option "xkb_layout" "de"
Information [ 5.139] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event8)
Information [ 5.139] (II) No input driver specified, ignoring this device.
Information [ 5.139] (II) This device may have been added with another device file.
Information [ 5.139] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
Information [ 5.139] (II) No input driver specified, ignoring this device.
Information [ 5.139] (II) This device may have been added with another device file.
Information [ 5.152] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
Information [ 5.152] (II) No input driver specified, ignoring this device.
Information [ 5.152] (II) This device may have been added with another device file.
Information [ 5.152] (II) config/udev: removing device HID 046a:0021
Information [ 5.173] (II) evdev: HID 046a:0021: Close
Information [ 5.173] (II) UnloadModule: "evdev"
Information [ 5.174] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event17)
Information [ 5.174] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall"
Information [ 5.174] (**) HID 046a:0021: Applying InputClass "system-keyboard"
Information [ 5.175] (II) Using input driver 'evdev' for 'HID 046a:0021'
Information [ 5.175] (**) HID 046a:0021: always reports core events
Information [ 5.175] (**) evdev: HID 046a:0021: Device: "/dev/input/event17"
Information [ 5.175] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21
Information [ 5.175] (--) evdev: HID 046a:0021: Found keys
Information [ 5.175] (II) evdev: HID 046a:0021: Configuring as keyboard
Information [ 5.175] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:046A:0021.0008/input/input18/event17"
Information [ 5.175] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 13)
Information [ 5.175] (**) Option "xkb_rules" "evdev"
Information [ 5.175] (**) Option "xkb_model" "pc104"
Information [ 5.175] (**) Option "xkb_layout" "de"
Information [ 5.176] (II) config/udev: removing device HID 046a:0021
Information [ 5.216] (II) evdev: HID 046a:0021: Close
Information [ 5.216] (II) UnloadModule: "evdev"
Information [ 5.217] (II) config/udev: Adding input device HID 046a:0021 (/dev/input/event18)
Information [ 5.217] (**) HID 046a:0021: Applying InputClass "evdev keyboard catchall"
Information [ 5.217] (**) HID 046a:0021: Applying InputClass "system-keyboard"
Information [ 5.217] (II) Using input driver 'evdev' for 'HID 046a:0021'
Information [ 5.217] (**) HID 046a:0021: always reports core events
Information [ 5.217] (**) evdev: HID 046a:0021: Device: "/dev/input/event18"
Information [ 5.217] (--) evdev: HID 046a:0021: Vendor 0x46a Product 0x21
Information [ 5.217] (--) evdev: HID 046a:0021: Found 1 mouse buttons
Information [ 5.217] (--) evdev: HID 046a:0021: Found scroll wheel(s)
Information [ 5.217] (--) evdev: HID 046a:0021: Found relative axes
Information [ 5.217] (II) evdev: HID 046a:0021: Forcing relative x/y axes to exist.
Information [ 5.217] (--) evdev: HID 046a:0021: Found absolute axes
Information [ 5.217] (II) evdev: HID 046a:0021: Forcing absolute x/y axes to exist.
Information [ 5.217] (--) evdev: HID 046a:0021: Found keys
Information [ 5.218] (II) evdev: HID 046a:0021: Configuring as mouse
Information [ 5.218] (II) evdev: HID 046a:0021: Configuring as keyboard
Information [ 5.218] (II) evdev: HID 046a:0021: Adding scrollwheel support
Information [ 5.218] (**) evdev: HID 046a:0021: YAxisMapping: buttons 4 and 5
Information [ 5.218] (**) evdev: HID 046a:0021: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 5.218] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:046A:0021.0009/input/input19/event18"
Information [ 5.218] (II) XINPUT: Adding extended input device "HID 046a:0021" (type: KEYBOARD, id 14)
Information [ 5.218] (**) Option "xkb_rules" "evdev"
Information [ 5.218] (**) Option "xkb_model" "pc104"
Information [ 5.218] (**) Option "xkb_layout" "de"
Information [ 5.218] (II) evdev: HID 046a:0021: initialized for relative axes.
Information [ 5.218] (WW) evdev: HID 046a:0021: ignoring absolute axes.
Information [ 5.218] (**) HID 046a:0021: (accel) keeping acceleration scheme 1
Information [ 5.218] (**) HID 046a:0021: (accel) acceleration profile 0
Information [ 5.218] (**) HID 046a:0021: (accel) acceleration factor: 2.000
Information [ 5.218] (**) HID 046a:0021: (accel) acceleration threshold: 4
Information [ 5.219] (II) config/udev: removing device Logitech USB Receiver
Information [ 5.250] (II) evdev: Logitech USB Receiver: Close
Information [ 5.250] (II) UnloadModule: "evdev"
Information [ 5.251] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event16)
Information [ 5.251] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
Information [ 5.251] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
Information [ 5.251] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
Information [ 5.251] (**) Logitech USB Receiver: always reports core events
Information [ 5.251] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event16"
Information [ 5.252] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
Information [ 5.252] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
Information [ 5.252] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
Information [ 5.252] (--) evdev: Logitech USB Receiver: Found relative axes
Information [ 5.252] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
Information [ 5.252] (--) evdev: Logitech USB Receiver: Found absolute axes
Information [ 5.252] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
Information [ 5.252] (--) evdev: Logitech USB Receiver: Found keys
Information [ 5.252] (II) evdev: Logitech USB Receiver: Configuring as mouse
Information [ 5.252] (II) evdev: Logitech USB Receiver: Configuring as keyboard
Information [ 5.252] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
Information [ 5.252] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
Information [ 5.252] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 5.252] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C526.0006/input/input17/event16"
Information [ 5.252] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
Information [ 5.252] (**) Option "xkb_rules" "evdev"
Information [ 5.252] (**) Option "xkb_model" "pc104"
Information [ 5.252] (**) Option "xkb_layout" "de"
Information [ 5.253] (II) evdev: Logitech USB Receiver: initialized for relative axes.
Information [ 5.253] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
Information [ 5.253] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
Information [ 5.253] (**) Logitech USB Receiver: (accel) acceleration profile 0
Information [ 5.253] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Information [ 5.253] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Information [ 5.254] (II) config/udev: removing device Logitech USB Receiver
Information [ 5.287] (II) evdev: Logitech USB Receiver: Close
Information [ 5.287] (II) UnloadModule: "evdev"
Information [ 5.288] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15)
Information [ 5.288] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
Information [ 5.288] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
Information [ 5.288] (**) Logitech USB Receiver: always reports core events
Information [ 5.288] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event15"
Information [ 5.340] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
Information [ 5.340] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
Information [ 5.340] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
Information [ 5.340] (--) evdev: Logitech USB Receiver: Found relative axes
Information [ 5.340] (--) evdev: Logitech USB Receiver: Found x and y relative axes
Information [ 5.340] (II) evdev: Logitech USB Receiver: Configuring as mouse
Information [ 5.340] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
Information [ 5.340] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
Information [ 5.340] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Information [ 5.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C526.0005/input/input16/event15"
Information [ 5.340] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
Information [ 5.340] (II) evdev: Logitech USB Receiver: initialized for relative axes.
Information [ 5.340] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
Information [ 5.340] (**) Logitech USB Receiver: (accel) acceleration profile 0
Information [ 5.341] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
Information [ 5.341] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
Information [ 8.172] (II) intel(0): EDID vendor "AUO", prod id 9052
Information [ 8.172] (II) intel(0): Printing DDC gathered Modelines:
Information [ 8.172] (II) intel(0): Modeline "1366x768"x0.0 76.30 1366 1404 1426 1592 768 771 777 798 -hsync -vsync (47.9 kHz eP)
Information [ 9.087] (II) intel(0): resizing framebuffer to 1920x1080
Information [ 9.097] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection noneEvery help is highly welcome.
Offline