You are not logged in.
Hi!
I realise that this error message seems to be quite common but I've gone through all the threads I've found but I can't find the solution for this problem.
The problem I'm having is that my user run services are not working.
When I check systemctl --user I get
$ systemctl --user
Failed to list units: Process org.freedesktop.systemd1 exited with status 1If I run it as root:
$ sudo systemctl --user
Failed to connect to bus: No such file or directoryI read in some post that $XDG_RUNTIME_DIR should be set but for me it is unset. I tried to do a system update with pacman -syu hoping it would solve the problem but It did not. I am currently running 4.2.3-1-ARCH
with systemd 227.
Journalctl -b -x seems to show all kinds of errors but I'm guessing they are related to the problem with systemd although I don't understand them.
-- Logs begin at Sat 2015-06-20 15:00:02 CEST, end at Sun 2015-10-11 00:01:01 CEST. --
Oct 10 23:44:48 terminal01 systemd-journald[218]: Runtime journal (/run/log/journal/) is currently using 8.0M.
Maximum allowed usage is set to 803.5M.
Leaving at least 1.1G free (of currently available 7.8G of space).
Enforced usage limit is thus 803.5M, of which 795.5M are still available.
Oct 10 23:44:49 terminal01 systemd-journald[218]: System journal (/var/log/journal/) is currently using 608.0M.
Maximum allowed usage is set to 3.8G.
Leaving at least 4.0G free (of currently available 5.0G of space).
Enforced usage limit is thus 1.6G, of which 1.0G are still available.
Oct 10 23:44:49 terminal01 systemd-journald[218]: Time spent on flushing to /var is 10.146ms for 2 entries.
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys cpuset
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys cpu
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys cpuacct
Oct 10 23:44:49 terminal01 kernel: Linux version 4.2.3-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Sat Oct 3 18:52:50 CEST 2015
Oct 10 23:44:49 terminal01 kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=64a2f1c7-7783-4244-97e9-c42e136206ce rw rootflags=subvol=subvol_ro
Oct 10 23:44:49 terminal01 kernel: tseg: 00cf800000
Oct 10 23:44:49 terminal01 kernel: x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
Oct 10 23:44:49 terminal01 kernel: x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Oct 10 23:44:49 terminal01 kernel: x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Oct 10 23:44:49 terminal01 kernel: x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
Oct 10 23:44:49 terminal01 kernel: x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
Oct 10 23:44:49 terminal01 kernel: x86/fpu: Using 'lazy' FPU context switches.
Oct 10 23:44:49 terminal01 kernel: e820: BIOS-provided physical RAM map:
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cdd94fff] usable
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cdd95000-0x00000000cddc4fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cddc5000-0x00000000cddd4fff] ACPI data
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cddd5000-0x00000000ce1c4fff] ACPI NVS
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000ce1c5000-0x00000000ced83fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000ced84000-0x00000000cedc1fff] type 20
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cedc2000-0x00000000cedc2fff] usable
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cedc3000-0x00000000cefc8fff] ACPI NVS
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cefc9000-0x00000000cf44afff] usable
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cf44b000-0x00000000cf7dbfff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000cf7dc000-0x00000000cf7fffff] usable
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
Oct 10 23:44:49 terminal01 kernel: BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
Oct 10 23:44:49 terminal01 kernel: NX (Execute Disable) protection: active
Oct 10 23:44:49 terminal01 kernel: efi: EFI v2.31 by American Megatrends
Oct 10 23:44:49 terminal01 kernel: efi: ACPI=0xcddcd000 ACPI 2.0=0xcddcd000 SMBIOS=0xf04c0 MPS=0xfd4d0
Oct 10 23:44:49 terminal01 kernel: SMBIOS 2.7 present.
Oct 10 23:44:49 terminal01 kernel: DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FDk 10/07/2014
Oct 10 23:44:49 terminal01 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Oct 10 23:44:49 terminal01 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Oct 10 23:44:49 terminal01 kernel: AGP: No AGP bridge found
Oct 10 23:44:49 terminal01 kernel: e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
Oct 10 23:44:49 terminal01 kernel: MTRR default type: uncachable
Oct 10 23:44:49 terminal01 kernel: MTRR fixed ranges enabled:
Oct 10 23:44:49 terminal01 kernel: 00000-9FFFF write-back
Oct 10 23:44:49 terminal01 kernel: A0000-BFFFF write-through
Oct 10 23:44:49 terminal01 kernel: C0000-CFFFF write-protect
Oct 10 23:44:49 terminal01 kernel: D0000-DFFFF uncachable
Oct 10 23:44:49 terminal01 kernel: E0000-FFFFF write-protect
Oct 10 23:44:49 terminal01 kernel: MTRR variable ranges enabled:
Oct 10 23:44:49 terminal01 kernel: 0 base 000000000000 mask FFFF80000000 write-back
Oct 10 23:44:49 terminal01 kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Oct 10 23:44:49 terminal01 kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
Oct 10 23:44:49 terminal01 kernel: 3 base 0000CF800000 mask FFFFFF800000 uncachable
Oct 10 23:44:49 terminal01 kernel: 4 disabled
Oct 10 23:44:49 terminal01 kernel: 5 disabled
Oct 10 23:44:49 terminal01 kernel: 6 disabled
Oct 10 23:44:49 terminal01 kernel: 7 disabled
Oct 10 23:44:49 terminal01 kernel: TOM2: 000000042f000000 aka 17136M
Oct 10 23:44:49 terminal01 kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
Oct 10 23:44:49 terminal01 kernel: e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
Oct 10 23:44:49 terminal01 kernel: e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
Oct 10 23:44:49 terminal01 kernel: found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
Oct 10 23:44:49 terminal01 kernel: Scanning 1 areas for low memory corruption
Oct 10 23:44:49 terminal01 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
Oct 10 23:44:49 terminal01 kernel: Using GB pages for direct mapping
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x00000000-0x000fffff] page 4k
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b36000, 0x02b36fff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b37000, 0x02b37fff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b38000, 0x02b38fff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x42ee00000-0x42effffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x42ee00000-0x42effffff] page 2M
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b39000, 0x02b39fff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x420000000-0x42edfffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x420000000-0x42edfffff] page 2M
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x400000000-0x41fffffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x400000000-0x41fffffff] page 2M
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x00100000-0xcdd94fff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x00100000-0x001fffff] page 4k
Oct 10 23:44:49 terminal01 kernel: [mem 0x00200000-0x3fffffff] page 2M
Oct 10 23:44:49 terminal01 kernel: [mem 0x40000000-0xbfffffff] page 1G
Oct 10 23:44:49 terminal01 kernel: [mem 0xc0000000-0xcdbfffff] page 2M
Oct 10 23:44:49 terminal01 kernel: [mem 0xcdc00000-0xcdd94fff] page 4k
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0xcedc2000-0xcedc2fff]
Oct 10 23:44:49 terminal01 kernel: [mem 0xcedc2000-0xcedc2fff] page 4k
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b3a000, 0x02b3afff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0xcefc9000-0xcf44afff]
Oct 10 23:44:49 terminal01 kernel: [mem 0xcefc9000-0xceffffff] page 4k
Oct 10 23:44:49 terminal01 kernel: [mem 0xcf000000-0xcf3fffff] page 2M
Oct 10 23:44:49 terminal01 kernel: [mem 0xcf400000-0xcf44afff] page 4k
Oct 10 23:44:49 terminal01 kernel: BRK [0x02b3b000, 0x02b3bfff] PGTABLE
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0xcf7dc000-0xcf7fffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0xcf7dc000-0xcf7fffff] page 4k
Oct 10 23:44:49 terminal01 kernel: init_memory_mapping: [mem 0x100001000-0x3ffffffff]
Oct 10 23:44:49 terminal01 kernel: [mem 0x100001000-0x1001fffff] page 4k
Oct 10 23:44:49 terminal01 kernel: [mem 0x100200000-0x13fffffff] page 2M
Oct 10 23:44:49 terminal01 kernel: [mem 0x140000000-0x3ffffffff] page 1G
Oct 10 23:44:49 terminal01 kernel: RAMDISK: [mem 0x377e6000-0x37beafff]
Oct 10 23:44:49 terminal01 kernel: ACPI: Early table checksum verification disabled
Oct 10 23:44:49 terminal01 kernel: ACPI: RSDP 0x00000000CDDCD000 000024 (v02 ALASKA)
Oct 10 23:44:49 terminal01 kernel: ACPI: XSDT 0x00000000CDDCD078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI: FACP 0x00000000CDDD2AF8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (201
Oct 10 23:44:49 terminal01 kernel: ACPI: DSDT 0x00000000CDDCD170 005985 (v02 ALASKA A M I 00000088 INTL 20051117)
Oct 10 23:44:49 terminal01 kernel: ACPI: FACS 0x00000000CE1BFF80 000040
Oct 10 23:44:49 terminal01 kernel: ACPI: APIC 0x00000000CDDD2BF0 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI: FPDT 0x00000000CDDD2C90 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI: MCFG 0x00000000CDDD2CD8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI: HPET 0x00000000CDDD2D18 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
Oct 10 23:44:49 terminal01 kernel: ACPI: BGRT 0x00000000CDDD2D50 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
Oct 10 23:44:49 terminal01 kernel: ACPI: SSDT 0x00000000CDDD2D88 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
Oct 10 23:44:49 terminal01 kernel: ACPI: MATS 0x00000000CDDD44A0 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
Oct 10 23:44:49 terminal01 kernel: ACPI: IVRS 0x00000000CDDD44D8 0000D8 (v01 AMD RD890S 00202031 AMD 00000000)
Oct 10 23:44:49 terminal01 kernel: ACPI: Local APIC address 0xfee00000
Oct 10 23:44:49 terminal01 kernel: No NUMA configuration found
Oct 10 23:44:49 terminal01 kernel: Faking a node at [mem 0x0000000000000000-0x000000042effffff]
Oct 10 23:44:49 terminal01 kernel: NODE_DATA(0) allocated [mem 0x42eff6000-0x42eff9fff]
Oct 10 23:44:49 terminal01 kernel: [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Oct 10 23:44:49 terminal01 kernel: Zone ranges:
Oct 10 23:44:49 terminal01 kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
Oct 10 23:44:49 terminal01 kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Oct 10 23:44:49 terminal01 kernel: Normal [mem 0x0000000100000000-0x000000042effffff]
Oct 10 23:44:49 terminal01 kernel: Movable zone start for each node
Oct 10 23:44:49 terminal01 kernel: Early memory node ranges
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x0000000000001000-0x000000000009ffff]
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x0000000000100000-0x00000000cdd94fff]
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x00000000cedc2000-0x00000000cedc2fff]
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x00000000cefc9000-0x00000000cf44afff]
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x00000000cf7dc000-0x00000000cf7fffff]
Oct 10 23:44:49 terminal01 kernel: node 0: [mem 0x0000000100001000-0x000000042effffff]
Oct 10 23:44:49 terminal01 kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
Oct 10 23:44:49 terminal01 kernel: On node 0 totalpages: 4182490
Oct 10 23:44:49 terminal01 kernel: DMA zone: 64 pages used for memmap
Oct 10 23:44:49 terminal01 kernel: DMA zone: 25 pages reserved
Oct 10 23:44:49 terminal01 kernel: DMA zone: 3999 pages, LIFO batch:0
Oct 10 23:44:49 terminal01 kernel: DMA32 zone: 13129 pages used for memmap
Oct 10 23:44:49 terminal01 kernel: DMA32 zone: 840252 pages, LIFO batch:31
Oct 10 23:44:49 terminal01 kernel: Normal zone: 52160 pages used for memmap
Oct 10 23:44:49 terminal01 kernel: Normal zone: 3338239 pages, LIFO batch:31
Oct 10 23:44:49 terminal01 kernel: ACPI: PM-Timer IO Port: 0x808
Oct 10 23:44:49 terminal01 kernel: ACPI: Local APIC address 0xfee00000
Oct 10 23:44:49 terminal01 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Oct 10 23:44:49 terminal01 kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
Oct 10 23:44:49 terminal01 kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
Oct 10 23:44:49 terminal01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 10 23:44:49 terminal01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 10 23:44:49 terminal01 kernel: ACPI: IRQ0 used by override.
Oct 10 23:44:49 terminal01 kernel: ACPI: IRQ9 used by override.
Oct 10 23:44:49 terminal01 kernel: Using ACPI (MADT) for SMP configuration information
Oct 10 23:44:49 terminal01 kernel: ACPI: HPET id: 0x43538210 base: 0xfed00000
Oct 10 23:44:49 terminal01 kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcdd95000-0xcddc4fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcddc5000-0xcddd4fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcddd5000-0xce1c4fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xce1c5000-0xced83fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xced84000-0xcedc1fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcedc3000-0xcefc8fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcf44b000-0xcf7dbfff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
Oct 10 23:44:49 terminal01 kernel: PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
Oct 10 23:44:49 terminal01 kernel: e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
Oct 10 23:44:49 terminal01 kernel: Booting paravirtualized kernel on bare hardware
Oct 10 23:44:49 terminal01 kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
Oct 10 23:44:49 terminal01 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
Oct 10 23:44:49 terminal01 kernel: PERCPU: Embedded 32 pages/cpu @ffff88042ec00000 s91480 r8192 d31400 u262144
Oct 10 23:44:49 terminal01 kernel: pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
Oct 10 23:44:49 terminal01 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Oct 10 23:44:49 terminal01 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 4117112
Oct 10 23:44:49 terminal01 kernel: Policy zone: Normal
Oct 10 23:44:49 terminal01 kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=64a2f1c7-7783-4244-97e9-c42e136206ce rw rootflags=subvol=su
Oct 10 23:44:49 terminal01 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Oct 10 23:44:49 terminal01 kernel: AGP: Checking aperture...
Oct 10 23:44:49 terminal01 kernel: AGP: No AGP bridge found
Oct 10 23:44:49 terminal01 kernel: AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Oct 10 23:44:49 terminal01 kernel: Memory: 16201260K/16729960K available (5592K kernel code, 922K rwdata, 1764K rodata, 1180K init, 1152K bss, 528700K
Oct 10 23:44:49 terminal01 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Oct 10 23:44:49 terminal01 kernel: Preemptible hierarchical RCU implementation.
Oct 10 23:44:49 terminal01 kernel: Build-time adjustment of leaf fanout to 64.
Oct 10 23:44:49 terminal01 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Oct 10 23:44:49 terminal01 kernel: RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
Oct 10 23:44:49 terminal01 kernel: NR_IRQS:8448 nr_irqs:1032 16
Oct 10 23:44:49 terminal01 kernel: Console: colour dummy device 80x25
Oct 10 23:44:49 terminal01 kernel: console [tty0] enabled
Oct 10 23:44:49 terminal01 kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
Oct 10 23:44:49 terminal01 kernel: hpet clockevent registered
Oct 10 23:44:49 terminal01 kernel: tsc: Fast TSC calibration using PIT
Oct 10 23:44:49 terminal01 kernel: tsc: Detected 4018.090 MHz processor
Oct 10 23:44:49 terminal01 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.02 BogoMIPS (lpj=13393633)
Oct 10 23:44:49 terminal01 kernel: pid_max: default: 32768 minimum: 301
Oct 10 23:44:49 terminal01 kernel: ACPI: Core revision 20150619
Oct 10 23:44:49 terminal01 kernel: ACPI: All ACPI Tables successfully acquired
Oct 10 23:44:49 terminal01 kernel: Security Framework initialized
Oct 10 23:44:49 terminal01 kernel: Yama: becoming mindful.
Oct 10 23:44:49 terminal01 kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Oct 10 23:44:49 terminal01 kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Oct 10 23:44:49 terminal01 kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 10 23:44:49 terminal01 kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys blkio
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys memory
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys devices
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys freezer
Oct 10 23:44:49 terminal01 kernel: Initializing cgroup subsys net_cls
Oct 10 23:44:49 terminal01 kernel: CPU: Physical Processor ID: 0
Oct 10 23:44:49 terminal01 kernel: CPU: Processor Core ID: 0
Oct 10 23:44:49 terminal01 kernel: mce: CPU supports 7 MCE banks
Oct 10 23:44:49 terminal01 kernel: LVT offset 1 assigned for vector 0xf9
Oct 10 23:44:49 terminal01 kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Oct 10 23:44:49 terminal01 kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Oct 10 23:44:49 terminal01 kernel: Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
Oct 10 23:44:49 terminal01 kernel: ftrace: allocating 22098 entries in 87 pages
Oct 10 23:44:49 terminal01 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 10 23:44:49 terminal01 kernel: smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Oct 10 23:44:49 terminal01 kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
Oct 10 23:44:49 terminal01 kernel: ... version: 0
Oct 10 23:44:49 terminal01 kernel: ... bit width: 48
Oct 10 23:44:49 terminal01 kernel: ... generic registers: 6
Oct 10 23:44:49 terminal01 kernel: ... value mask: 0000ffffffffffff
Oct 10 23:44:49 terminal01 kernel: ... max period: 00007fffffffffff
Oct 10 23:44:49 terminal01 kernel: ... fixed-purpose events: 0
Oct 10 23:44:49 terminal01 kernel: ... event mask: 000000000000003f
Oct 10 23:44:49 terminal01 kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Oct 10 23:44:49 terminal01 kernel: x86: Booting SMP configuration:
Oct 10 23:44:49 terminal01 kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
Oct 10 23:44:49 terminal01 kernel: x86: Booted up 1 node, 8 CPUs
Oct 10 23:44:49 terminal01 kernel: smpboot: Total of 8 processors activated (64315.16 BogoMIPS)
Oct 10 23:44:49 terminal01 kernel: devtmpfs: initialized
Oct 10 23:44:49 terminal01 kernel: PM: Registering ACPI NVS region [mem 0xcddd5000-0xce1c4fff] (4128768 bytes)
Oct 10 23:44:49 terminal01 kernel: PM: Registering ACPI NVS region [mem 0xcedc3000-0xcefc8fff] (2121728 bytes)
Oct 10 23:44:49 terminal01 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
Oct 10 23:44:49 terminal01 kernel: pinctrl core: initialized pinctrl subsystem
Oct 10 23:44:49 terminal01 kernel: RTC time: 21:44:47, date: 10/10/15
Oct 10 23:44:49 terminal01 kernel: NET: Registered protocol family 16
Oct 10 23:44:49 terminal01 kernel: cpuidle: using governor ladder
Oct 10 23:44:49 terminal01 kernel: cpuidle: using governor menu
Oct 10 23:44:49 terminal01 kernel: ACPI: bus type PCI registered
Oct 10 23:44:49 terminal01 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 10 23:44:49 terminal01 kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Oct 10 23:44:49 terminal01 kernel: PCI: not using MMCONFIG
Oct 10 23:44:49 terminal01 kernel: PCI: Using configuration type 1 for base access
Oct 10 23:44:49 terminal01 kernel: PCI: Using configuration type 1 for extended access
Oct 10 23:44:49 terminal01 kernel: ACPI: Added _OSI(Module Device)
Oct 10 23:44:49 terminal01 kernel: ACPI: Added _OSI(Processor Device)
Oct 10 23:44:49 terminal01 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 10 23:44:49 terminal01 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Oct 10 23:44:49 terminal01 kernel: ACPI: Executed 3 blocks of module-level executable AML code
Oct 10 23:44:49 terminal01 kernel: ACPI: Interpreter enabled
Oct 10 23:44:49 terminal01 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
Oct 10 23:44:49 terminal01 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
Oct 10 23:44:49 terminal01 kernel: ACPI: (supports S0 S3 S4 S5)
Oct 10 23:44:49 terminal01 kernel: ACPI: Using IOAPIC for interrupt routing
Oct 10 23:44:49 terminal01 kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Oct 10 23:44:49 terminal01 kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Oct 10 23:44:49 terminal01 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Oct 10 23:44:49 terminal01 kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Oct 10 23:44:49 terminal01 kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Oct 10 23:44:49 terminal01 kernel: PCI host bridge to bus 0000:00
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe50b000-0xfe50b3ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe50a000-0xfe50afff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe509000-0xfe5090ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.2: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe508000-0xfe508fff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.2: reg 0x10: [mem 0xfe507000-0xfe5070ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.2: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.2: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.5: reg 0x10: [mem 0xfe506000-0xfe506fff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.0: reg 0x10: [mem 0xfe505000-0xfe505fff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.2: reg 0x10: [mem 0xfe504000-0xfe5040ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.2: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:16.2: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: [10de:1184] type 00 class 0x030000
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
Oct 10 23:44:49 terminal01 kernel: pci 0000:02:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]
Oct 10 23:44:49 terminal01 kernel: pci 0000:02:00.0: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: bridge window [mem 0xfe400000-0xfe4fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x24: [mem 0xfe310000-0xfe3101ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfe300000-0xfe30ffff pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:03:00.0: PME# supported from D3hot
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: bridge window [mem 0xfe300000-0xfe3fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
Oct 10 23:44:49 terminal01 kernel: pci 0000:04:0e.0: reg 0x10: [mem 0xfe200000-0xfe2007ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:04:0e.0: reg 0x14: [io 0xc000-0xc07f]
Oct 10 23:44:49 terminal01 kernel: pci 0000:04:0e.0: supports D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: reg 0x18: [mem 0xda104000-0xda104fff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:05:00.0: System wakeup disabled by ACPI
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: PCI bridge to [bus 05]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
Oct 10 23:44:49 terminal01 kernel: pci 0000:06:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
Oct 10 23:44:49 terminal01 kernel: pci 0000:06:00.0: supports D1 D2
Oct 10 23:44:49 terminal01 kernel: pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: PCI bridge to [bus 06]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: on NUMA node 0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
Oct 10 23:44:49 terminal01 kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
Oct 10 23:44:49 terminal01 kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 10 23:44:49 terminal01 kernel: vgaarb: loaded
Oct 10 23:44:49 terminal01 kernel: vgaarb: bridge control possible 0000:01:00.0
Oct 10 23:44:49 terminal01 kernel: PCI: Using ACPI for IRQ routing
Oct 10 23:44:49 terminal01 kernel: PCI: pci_cache_line_size set to 64 bytes
Oct 10 23:44:49 terminal01 kernel: e820: reserve RAM buffer [mem 0xcdd95000-0xcfffffff]
Oct 10 23:44:49 terminal01 kernel: e820: reserve RAM buffer [mem 0xcedc3000-0xcfffffff]
Oct 10 23:44:49 terminal01 kernel: e820: reserve RAM buffer [mem 0xcf44b000-0xcfffffff]
Oct 10 23:44:49 terminal01 kernel: e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
Oct 10 23:44:49 terminal01 kernel: e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
Oct 10 23:44:49 terminal01 kernel: NetLabel: Initializing
Oct 10 23:44:49 terminal01 kernel: NetLabel: domain hash size = 128
Oct 10 23:44:49 terminal01 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Oct 10 23:44:49 terminal01 kernel: NetLabel: unlabeled traffic allowed by default
Oct 10 23:44:49 terminal01 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Oct 10 23:44:49 terminal01 kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Oct 10 23:44:49 terminal01 kernel: clocksource: Switched to clocksource hpet
Oct 10 23:44:49 terminal01 kernel: pnp: PnP ACPI init
Oct 10 23:44:49 terminal01 kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x040b] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x04d6] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c00-0x0c01] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c14] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c50-0x0c51] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c52] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c6c] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0c6f] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0cd0-0x0cd1] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0cd2-0x0cd3] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0cd4-0x0cd5] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0cd6-0x0cd7] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0cd8-0x0cdf] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0800-0x089f] could not be reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0b20-0x0b3f] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0900-0x090f] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0x0910-0x091f] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [io 0xfe00-0xfefe] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:02: [io 0x0220-0x0227] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:02: [io 0x0228-0x0237] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:02: [io 0x0a20-0x0a2f] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: pnp 00:03: [dma 0 disabled]
Oct 10 23:44:49 terminal01 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
Oct 10 23:44:49 terminal01 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:05: [io 0x04d0-0x04d1] has been reserved
Oct 10 23:44:49 terminal01 kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
Oct 10 23:44:49 terminal01 kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
Oct 10 23:44:49 terminal01 kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 10 23:44:49 terminal01 kernel: pnp: PnP ACPI: found 9 devices
Oct 10 23:44:49 terminal01 kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:09.0: bridge window [mem 0xfe400000-0xfe4fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: PCI bridge to [bus 03]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:0a.0: bridge window [mem 0xfe300000-0xfe3fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: PCI bridge to [bus 04]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: PCI bridge to [bus 05]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: PCI bridge to [bus 06]
Oct 10 23:44:49 terminal01 kernel: pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff window]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:05: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
Oct 10 23:44:49 terminal01 kernel: pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
Oct 10 23:44:49 terminal01 kernel: NET: Registered protocol family 2
Oct 10 23:44:49 terminal01 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 10 23:44:49 terminal01 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 10 23:44:49 terminal01 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 10 23:44:49 terminal01 kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
Oct 10 23:44:49 terminal01 kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Oct 10 23:44:49 terminal01 kernel: NET: Registered protocol family 1
Oct 10 23:44:49 terminal01 kernel: pci 0000:01:00.0: Video device with shadowed ROM
Oct 10 23:44:49 terminal01 kernel: PCI: CLS 64 bytes, default 64
Oct 10 23:44:49 terminal01 kernel: Unpacking initramfs...
Oct 10 23:44:49 terminal01 kernel: Freeing initrd memory: 4116K (ffff8800377e6000 - ffff880037beb000)
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:00.0 to group 0
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:02.0 to group 1
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:09.0 to group 2
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:0a.0 to group 3
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:11.0 to group 4
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:12.0 to group 5
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:12.2 to group 5
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:13.0 to group 6
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:13.2 to group 6
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.0 to group 7
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.1 to group 8
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.2 to group 9
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.3 to group 10
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.4 to group 11
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:14.5 to group 12
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:15.0 to group 13
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:15.1 to group 13
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:16.0 to group 14
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:00:16.2 to group 14
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:01:00.0 to group 15
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:01:00.1 to group 15
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:02:00.0 to group 16
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:03:00.0 to group 17
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:04:0e.0 to group 11
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:05:00.0 to group 13
Oct 10 23:44:49 terminal01 kernel: iommu: Adding device 0000:06:00.0 to group 13
Oct 10 23:44:49 terminal01 kernel: AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
Oct 10 23:44:49 terminal01 kernel: AMD-Vi: Interrupt remapping enabled
Oct 10 23:44:49 terminal01 kernel: AMD-Vi: Lazy IO/TLB flushing enabled
Oct 10 23:44:49 terminal01 kernel: perf: AMD NB counters detected
Oct 10 23:44:49 terminal01 kernel: microcode: CPU0: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU1: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU2: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU3: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU4: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU5: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU6: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: CPU7: patch_level=0x06000822
Oct 10 23:44:49 terminal01 kernel: microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 10 23:44:49 terminal01 kernel: LVT offset 0 assigned for vector 0x400
Oct 10 23:44:49 terminal01 kernel: perf: AMD IBS detected (0x000000ff)
Oct 10 23:44:49 terminal01 kernel: Scanning for low memory corruption every 60 seconds
Oct 10 23:44:49 terminal01 kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
Oct 10 23:44:49 terminal01 kernel: Initialise system trusted keyring
Oct 10 23:44:49 terminal01 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 10 23:44:49 terminal01 kernel: zpool: loaded
Oct 10 23:44:49 terminal01 kernel: zbud: loaded
Oct 10 23:44:49 terminal01 kernel: VFS: Disk quotas dquot_6.6.0
Oct 10 23:44:49 terminal01 kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 10 23:44:49 terminal01 kernel: Key type big_key registered
Oct 10 23:44:49 terminal01 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Oct 10 23:44:49 terminal01 kernel: io scheduler noop registered
Oct 10 23:44:49 terminal01 kernel: io scheduler deadline registered
Oct 10 23:44:49 terminal01 kernel: io scheduler cfq registered (default)
Oct 10 23:44:49 terminal01 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 10 23:44:49 terminal01 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 10 23:44:49 terminal01 kernel: efifb: probing for efifb
Oct 10 23:44:49 terminal01 kernel: efifb: framebuffer at 0xd9000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
Oct 10 23:44:49 terminal01 kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
Oct 10 23:44:49 terminal01 kernel: efifb: scrolling: redraw
Oct 10 23:44:49 terminal01 kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Oct 10 23:44:49 terminal01 kernel: Console: switching to colour frame buffer device 128x48
Oct 10 23:44:49 terminal01 kernel: fb0: EFI VGA frame buffer device
Oct 10 23:44:49 terminal01 kernel: GHES: HEST is not enabled!
Oct 10 23:44:49 terminal01 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oct 10 23:44:49 terminal01 kernel: 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Oct 10 23:44:49 terminal01 kernel: Linux agpgart interface v0.103
Oct 10 23:44:49 terminal01 kernel: rtc_cmos 00:04: RTC can wake from S4
Oct 10 23:44:49 terminal01 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 10 23:44:49 terminal01 kernel: rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct 10 23:44:49 terminal01 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 10 23:44:49 terminal01 kernel: NET: Registered protocol family 10
Oct 10 23:44:49 terminal01 kernel: NET: Registered protocol family 17
Oct 10 23:44:49 terminal01 kernel: Loading compiled-in X.509 certificates
Oct 10 23:44:49 terminal01 kernel: registered taskstats version 1
Oct 10 23:44:49 terminal01 kernel: zswap: loading zswap
Oct 10 23:44:49 terminal01 kernel: zswap: using zbud pool
Oct 10 23:44:49 terminal01 kernel: zswap: using lzo compressor
Oct 10 23:44:49 terminal01 kernel: Magic number: 3:688:752
Oct 10 23:44:49 terminal01 kernel: tty ttyS3: hash matches
Oct 10 23:44:49 terminal01 kernel: rtc_cmos 00:04: setting system clock to 2015-10-10 21:44:47 UTC (1444513487)
Oct 10 23:44:49 terminal01 kernel: PM: Hibernation image not present or could not be loaded.
Oct 10 23:44:49 terminal01 kernel: Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
Oct 10 23:44:49 terminal01 kernel: Write protecting the kernel read-only data: 8192k
Oct 10 23:44:49 terminal01 kernel: Freeing unused kernel memory: 540K (ffff880002579000 - ffff880002600000)
Oct 10 23:44:49 terminal01 kernel: Freeing unused kernel memory: 284K (ffff8800027b9000 - ffff880002800000)
Oct 10 23:44:49 terminal01 kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
Oct 10 23:44:49 terminal01 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Oct 10 23:44:49 terminal01 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 10 23:44:49 terminal01 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 10 23:44:49 terminal01 kernel: ACPI: bus type USB registered
Oct 10 23:44:49 terminal01 kernel: usbcore: registered new interface driver usbfs
Oct 10 23:44:49 terminal01 kernel: usbcore: registered new interface driver hub
Oct 10 23:44:49 terminal01 kernel: usbcore: registered new device driver usb
Oct 10 23:44:49 terminal01 kernel: SCSI subsystem initialized
Oct 10 23:44:49 terminal01 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 10 23:44:49 terminal01 kernel: ehci-pci: EHCI PCI platform driver
Oct 10 23:44:49 terminal01 kernel: QUIRK: Enable AMD PLL fix
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: debug port 1
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe509000
Oct 10 23:44:49 terminal01 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 10 23:44:49 terminal01 kernel: ohci-pci: OHCI PCI platform driver
Oct 10 23:44:49 terminal01 kernel: libata version 3.00 loaded.
Oct 10 23:44:49 terminal01 kernel: firewire_ohci 0000:04:0e.0: enabling device (0000 -> 0003)
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Oct 10 23:44:49 terminal01 kernel: hub 1-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 1-0:1.0: 5 ports detected
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
Oct 10 23:44:49 terminal01 kernel: hub 2-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 2-0:1.0: 2 ports detected
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 10 23:44:49 terminal01 kernel: hub 3-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 3-0:1.0: 2 ports detected
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: debug port 1
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xfe507000
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Oct 10 23:44:49 terminal01 kernel: hub 4-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 4-0:1.0: 5 ports detected
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:06:00.0: xHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
Oct 10 23:44:49 terminal01 kernel: hub 5-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 5-0:1.0: 2 ports detected
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:06:00.0: xHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
Oct 10 23:44:49 terminal01 kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 10 23:44:49 terminal01 kernel: hub 6-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 6-0:1.0: 2 ports detected
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: debug port 1
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xfe504000
Oct 10 23:44:49 terminal01 kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
Oct 10 23:44:49 terminal01 kernel: hub 7-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 7-0:1.0: 4 ports detected
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xfe50a000
Oct 10 23:44:49 terminal01 kernel: firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
Oct 10 23:44:49 terminal01 kernel: hub 8-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 8-0:1.0: 5 ports detected
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe508000
Oct 10 23:44:49 terminal01 kernel: hub 9-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 9-0:1.0: 5 ports detected
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe506000
Oct 10 23:44:49 terminal01 kernel: hub 10-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 10-0:1.0: 2 ports detected
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
Oct 10 23:44:49 terminal01 kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xfe505000
Oct 10 23:44:49 terminal01 kernel: hub 11-0:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 11-0:1.0: 4 ports detected
Oct 10 23:44:49 terminal01 kernel: scsi host0: pata_atiixp
Oct 10 23:44:49 terminal01 kernel: scsi host1: pata_atiixp
Oct 10 23:44:49 terminal01 kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Oct 10 23:44:49 terminal01 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Oct 10 23:44:49 terminal01 kernel: ahci 0000:00:11.0: version 3.0
Oct 10 23:44:49 terminal01 kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
Oct 10 23:44:49 terminal01 kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Oct 10 23:44:49 terminal01 kernel: scsi host2: ahci
Oct 10 23:44:49 terminal01 kernel: scsi host3: ahci
Oct 10 23:44:49 terminal01 kernel: scsi host4: ahci
Oct 10 23:44:49 terminal01 kernel: scsi host5: ahci
Oct 10 23:44:49 terminal01 kernel: ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
Oct 10 23:44:49 terminal01 kernel: ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
Oct 10 23:44:49 terminal01 kernel: ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19
Oct 10 23:44:49 terminal01 kernel: ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
Oct 10 23:44:49 terminal01 kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Oct 10 23:44:49 terminal01 kernel: ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
Oct 10 23:44:49 terminal01 kernel: scsi host6: ahci
Oct 10 23:44:49 terminal01 kernel: scsi host7: ahci
Oct 10 23:44:49 terminal01 kernel: ata7: SATA max UDMA/133 abar m512@0xfe310000 port 0xfe310100 irq 33
Oct 10 23:44:49 terminal01 kernel: ata8: SATA max UDMA/133 abar m512@0xfe310000 port 0xfe310180 irq 33
Oct 10 23:44:49 terminal01 kernel: firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550a3350b00, S400
Oct 10 23:44:49 terminal01 kernel: usb 9-2: new full-speed USB device number 2 using ohci-pci
Oct 10 23:44:49 terminal01 kernel: ata5: SATA link down (SStatus 0 SControl 300)
Oct 10 23:44:49 terminal01 kernel: ata6: SATA link down (SStatus 0 SControl 300)
Oct 10 23:44:49 terminal01 kernel: usb 4-3: new high-speed USB device number 3 using ehci-pci
Oct 10 23:44:49 terminal01 kernel: ata7: SATA link down (SStatus 0 SControl 300)
Oct 10 23:44:49 terminal01 kernel: ata8: SATA link down (SStatus 0 SControl 300)
Oct 10 23:44:49 terminal01 kernel: hub 4-3:1.0: USB hub found
Oct 10 23:44:49 terminal01 kernel: hub 4-3:1.0: 4 ports detected
Oct 10 23:44:49 terminal01 kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 10 23:44:49 terminal01 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Oct 10 23:44:49 terminal01 kernel: ata4.00: HPA detected: current 1953523055, native 1953525168
Oct 10 23:44:49 terminal01 kernel: ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
Oct 10 23:44:49 terminal01 kernel: ata4.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Oct 10 23:44:49 terminal01 kernel: usbcore: registered new interface driver usbhid
Oct 10 23:44:49 terminal01 kernel: usbhid: USB HID core driver
Oct 10 23:44:49 terminal01 kernel: input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:046D:C245.0001/input/inp
Oct 10 23:44:49 terminal01 kernel: hid-generic 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:13.0
Oct 10 23:44:49 terminal01 kernel: ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 10 23:44:49 terminal01 kernel: ata3.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133
Oct 10 23:44:49 terminal01 kernel: ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Oct 10 23:44:49 terminal01 kernel: ata3.00: configured for UDMA/133
Oct 10 23:44:49 terminal01 kernel: scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDH22 200 PQ: 0 ANSI: 5
Oct 10 23:44:49 terminal01 kernel: ata4.00: configured for UDMA/133
Oct 10 23:44:49 terminal01 kernel: scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1118 PQ: 0 ANSI: 5
Oct 10 23:44:49 terminal01 kernel: hid-generic 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1
Oct 10 23:44:49 terminal01 kernel: sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
Oct 10 23:44:49 terminal01 kernel: sd 2:0:0:0: [sda] Write Protect is off
Oct 10 23:44:49 terminal01 kernel: sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 10 23:44:49 terminal01 kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 10 23:44:49 terminal01 kernel: sd 3:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
Oct 10 23:44:49 terminal01 kernel: sd 3:0:0:0: [sdb] Write Protect is off
Oct 10 23:44:49 terminal01 kernel: sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 10 23:44:49 terminal01 kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 10 23:44:49 terminal01 kernel: sda: sda1 sda2 sda3 sda4 sda5 sda6
Oct 10 23:44:49 terminal01 kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Oct 10 23:44:49 terminal01 kernel: sdb: sdb1 sdb2
Oct 10 23:44:49 terminal01 kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x1 gen() 7241 MB/s
Oct 10 23:44:49 terminal01 kernel: tsc: Refined TSC clocksource calibration: 4018.225 MHz
Oct 10 23:44:49 terminal01 kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39eb9dbc74f, max_idle_ns: 440795373111 ns
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x1 xor() 4829 MB/s
Oct 10 23:44:49 terminal01 kernel: usb 4-3.2: new full-speed USB device number 4 using ehci-pci
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x2 gen() 11752 MB/s
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x2 xor() 7846 MB/s
Oct 10 23:44:49 terminal01 kernel: input: Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3.2/4-3.2:1.0/0003:195D:2029.0003/input/input3
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x4 gen() 13880 MB/s
Oct 10 23:44:49 terminal01 kernel: hid-generic 0003:195D:2029.0003: input,hidraw2: USB HID v1.11 Keyboard [Gaming keyboard] on usb-0000:00:13.2-3.2/inp
Oct 10 23:44:49 terminal01 kernel: input: Gaming keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3.2/4-3.2:1.1/0003:195D:2029.0004/input/input4
Oct 10 23:44:49 terminal01 kernel: raid6: sse2x4 xor() 7008 MB/s
Oct 10 23:44:49 terminal01 kernel: raid6: using algorithm sse2x4 gen() 13880 MB/s
Oct 10 23:44:49 terminal01 kernel: raid6: .... xor() 7008 MB/s, rmw enabled
Oct 10 23:44:49 terminal01 kernel: raid6: using ssse3x2 recovery algorithm
Oct 10 23:44:49 terminal01 kernel: xor: automatically using best checksumming function:
Oct 10 23:44:49 terminal01 kernel: hid-generic 0003:195D:2029.0004: input,hidraw3: USB HID v1.11 Device [Gaming keyboard] on usb-0000:00:13.2-3.2/input
Oct 10 23:44:49 terminal01 kernel: avx : 4666.800 MB/sec
Oct 10 23:44:49 terminal01 kernel: Btrfs loaded
Oct 10 23:44:49 terminal01 kernel: BTRFS: device label Home devid 1 transid 83527 /dev/sdb2
Oct 10 23:44:49 terminal01 kernel: BTRFS: device label arch devid 1 transid 21389 /dev/sda6
Oct 10 23:44:49 terminal01 kernel: BTRFS info (device sda6): disk space caching is enabled
Oct 10 23:44:49 terminal01 kernel: BTRFS: has skinny extents
Oct 10 23:44:49 terminal01 kernel: BTRFS: detected SSD devices, enabling SSD mode
Oct 10 23:44:49 terminal01 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 10 23:44:49 terminal01 systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +
Oct 10 23:44:49 terminal01 systemd[1]: Detected architecture x86-64.
Oct 10 23:44:49 terminal01 systemd[1]: Set hostname to <terminal01>.
Oct 10 23:44:49 terminal01 systemd[1]: vmware.service: Cannot add dependency job, ignoring: Unit vmware-usbarbitrator.service failed to load: No such f
Oct 10 23:44:49 terminal01 systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No su
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Remote File Systems.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 10 23:44:49 terminal01 systemd[1]: Listening on LVM2 metadata daemon socket.
Oct 10 23:44:49 terminal01 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on Network Service Netlink Socket.
Oct 10 23:44:49 terminal01 systemd[1]: Created slice User and Session Slice.
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Encrypted Volumes.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on Journal Socket.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on udev Kernel Socket.
Oct 10 23:44:49 terminal01 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 10 23:44:49 terminal01 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Paths.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Oct 10 23:44:49 terminal01 systemd[1]: Listening on udev Control Socket.
Oct 10 23:44:49 terminal01 systemd[1]: Created slice System Slice.
Oct 10 23:44:49 terminal01 systemd[1]: Mounting POSIX Message Queue File System...
Oct 10 23:44:49 terminal01 systemd[1]: Created slice system-syncthing\x2dinotify.slice.
Oct 10 23:44:49 terminal01 systemd[1]: Created slice system-syncthing.slice.
Oct 10 23:44:49 terminal01 systemd[1]: Created slice system-dropbox.slice.
Oct 10 23:44:49 terminal01 systemd[1]: Mounting Debug File System...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Setup Virtual Console...
Oct 10 23:44:49 terminal01 systemd[1]: Mounting Temporary Directory...
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Slices.
Oct 10 23:44:49 terminal01 systemd[1]: Mounting Huge Pages File System...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Create list of required static device nodes for the current kernel...
Oct 10 23:44:49 terminal01 systemd[1]: Created slice system-getty.slice.
Oct 10 23:44:49 terminal01 systemd[1]: Starting Journal Service...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Load Kernel Modules...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 10 23:44:49 terminal01 systemd[1]: Started Create list of required static device nodes for the current kernel.
Oct 10 23:44:49 terminal01 kernel: BTRFS info (device sda6): disk space caching is enabled
Oct 10 23:44:49 terminal01 systemd[1]: Mounted Debug File System.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted POSIX Message Queue File System.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted Huge Pages File System.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted Temporary Directory.
Oct 10 23:44:49 terminal01 systemd[1]: Started Load Kernel Modules.
Oct 10 23:44:49 terminal01 systemd[1]: Started Remount Root and Kernel File Systems.
Oct 10 23:44:49 terminal01 systemd[1]: Starting Load/Save Random Seed...
Oct 10 23:44:49 terminal01 systemd[1]: Starting udev Coldplug all Devices...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 10 23:44:49 terminal01 systemd[1]: Starting Apply Kernel Variables...
Oct 10 23:44:49 terminal01 systemd[1]: Mounting Configuration File System...
Oct 10 23:44:49 terminal01 systemd[1]: Mounted Configuration File System.
Oct 10 23:44:49 terminal01 systemd[1]: Started Load/Save Random Seed.
Oct 10 23:44:49 terminal01 systemd[1]: Started Create Static Device Nodes in /dev.
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Local File Systems (Pre).
Oct 10 23:44:49 terminal01 systemd[1]: Starting udev Kernel Device Manager...
Oct 10 23:44:49 terminal01 systemd[1]: Started Setup Virtual Console.
Oct 10 23:44:49 terminal01 systemd[1]: Started udev Coldplug all Devices.
Oct 10 23:44:49 terminal01 systemd[1]: Started udev Kernel Device Manager.
Oct 10 23:44:49 terminal01 systemd[1]: Started Apply Kernel Variables.
Oct 10 23:44:49 terminal01 kernel: ACPI: acpi_idle registered with cpuidle
Oct 10 23:44:49 terminal01 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
Oct 10 23:44:49 terminal01 kernel: ACPI: Power Button [PWRB]
Oct 10 23:44:49 terminal01 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
Oct 10 23:44:49 terminal01 kernel: ACPI: Power Button [PWRF]
Oct 10 23:44:49 terminal01 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 10 23:44:49 terminal01 kernel: wmi: Mapper loaded
Oct 10 23:44:49 terminal01 kernel: acpi-cpufreq: overriding BIOS provided _PSD data
Oct 10 23:44:49 terminal01 kernel: [drm] Initialized drm 1.1.0 20060810
Oct 10 23:44:49 terminal01 kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Oct 10 23:44:49 terminal01 kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
Oct 10 23:44:49 terminal01 kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Oct 10 23:44:49 terminal01 kernel: sp5100_tco: PCI Revision ID: 0x42
Oct 10 23:44:49 terminal01 kernel: sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
Oct 10 23:44:49 terminal01 kernel: sp5100_tco: Last reboot was not triggered by watchdog.
Oct 10 23:44:49 terminal01 kernel: sp5100_tco: initialized (0xffffc900018b2b00). heartbeat=60 sec (nowayout=0)
Oct 10 23:44:49 terminal01 kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 10 23:44:49 terminal01 kernel: r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
Oct 10 23:44:49 terminal01 kernel: r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018b4000, 94:de:80:28:a0:4e, XID 0c900800 IRQ 34
Oct 10 23:44:49 terminal01 kernel: r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Oct 10 23:44:49 terminal01 kernel: MCE: In-kernel MCE decoding enabled.
Oct 10 23:44:49 terminal01 kernel: EDAC MC: Ver: 3.0.0
Oct 10 23:44:49 terminal01 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
Oct 10 23:44:49 terminal01 kernel: AMD64 EDAC driver v3.4.0
Oct 10 23:44:49 terminal01 kernel: EDAC amd64: DRAM ECC disabled.
Oct 10 23:44:49 terminal01 kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Oct 10 23:44:49 terminal01 kernel: mousedev: PS/2 mouse device common for all mice
Oct 10 23:44:49 terminal01 kernel: snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
Oct 10 23:44:49 terminal01 kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
Oct 10 23:44:49 terminal01 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
Oct 10 23:44:49 terminal01 kernel: AVX version of gcm_enc/dec engaged.
Oct 10 23:44:49 terminal01 kernel: AES CTR mode by8 optimization enabled
Oct 10 23:44:49 terminal01 systemd[1]: Found device SanDisk_SDSSDH2256G 5.
Oct 10 23:44:49 terminal01 systemd[1]: Found device SanDisk_SDSSDH2256G 5.
Oct 10 23:44:49 terminal01 systemd[1]: Activating swap Swap Partition...
Oct 10 23:44:49 terminal01 systemd[1]: Mounting /mnt/btrfs...
Oct 10 23:44:49 terminal01 kernel: Adding 2097148k swap on /dev/sda5. Priority:-1 extents:1 across:2097148k SSFS
Oct 10 23:44:49 terminal01 systemd[1]: Mounting /.snapshots...
Oct 10 23:44:49 terminal01 systemd[1]: Activated swap Swap Partition.
Oct 10 23:44:49 terminal01 systemd[1]: Activated swap /dev/disk/by-uuid/0066ef45-f0d2-48ea-a3cf-f2e4ec1b7275.
Oct 10 23:44:49 terminal01 systemd[1]: Found device SanDisk_SDSSDH2256G EFI\x20system\x20partition.
Oct 10 23:44:49 terminal01 systemd[1]: Found device SAMSUNG_HD103UJ Storage.
Oct 10 23:44:49 terminal01 systemd[1]: Found device SAMSUNG_HD103UJ Home.
Oct 10 23:44:49 terminal01 systemd[1]: home.mount: Directory /home to mount over is not empty, mounting anyway.
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
Oct 10 23:44:49 terminal01 kernel: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Oct 10 23:44:49 terminal01 systemd[1]: Mounting /home...
Oct 10 23:44:49 terminal01 kernel: r8169 0000:05:00.0 enp5s0: renamed from eth0
Oct 10 23:44:49 terminal01 systemd[1]: Mounting /mnt/ntfs...
Oct 10 23:44:49 terminal01 kernel: BTRFS info (device sdb2): disk space caching is enabled
Oct 10 23:44:49 terminal01 kernel: BTRFS: has skinny extents
Oct 10 23:44:49 terminal01 systemd[1]: Mounting /boot...
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Swap.
Oct 10 23:44:49 terminal01 kernel: nvidia: module license 'NVIDIA' taints kernel.
Oct 10 23:44:49 terminal01 kernel: Disabling lock debugging due to kernel taint
Oct 10 23:44:49 terminal01 kernel: fuse init (API version 7.23)
Oct 10 23:44:49 terminal01 kernel: kvm: Nested Virtualization enabled
Oct 10 23:44:49 terminal01 kernel: kvm: Nested Paging enabled
Oct 10 23:44:49 terminal01 systemd[1]: Mounting FUSE Control File System...
Oct 10 23:44:49 terminal01 systemd[1]: Reached target Sound Card.
Oct 10 23:44:49 terminal01 kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Oct 10 23:44:49 terminal01 kernel: NVLINK: Nvlink Core is being initialized, major device number 246
Oct 10 23:44:49 terminal01 kernel: [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
Oct 10 23:44:49 terminal01 kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 355.11 Wed Aug 26 16:35:41 PDT 2015
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
Oct 10 23:44:49 terminal01 systemd[1]: Mounted FUSE Control File System.
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
Oct 10 23:44:49 terminal01 kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
Oct 10 23:44:49 terminal01 kernel: FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted /boot.
Oct 10 23:44:49 terminal01 systemd-journald[218]: Journal started
-- Subject: The journal has been started
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The system journal process has started up, opened the journal
-- files for writing and is now ready to process requests.
Oct 10 23:44:49 terminal01 systemd-modules-load[220]: Inserted module 'virtio'
Oct 10 23:44:49 terminal01 mtp-probe[286]: checking bus 9, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb9/9-2"
Oct 10 23:44:49 terminal01 mtp-probe[285]: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3.2"
Oct 10 23:44:49 terminal01 mtp-probe[286]: bus: 9, device: 2 was not an MTP device
Oct 10 23:44:49 terminal01 mtp-probe[285]: bus: 4, device: 4 was not an MTP device
Oct 10 23:44:49 terminal01 systemd[1]: Started Journal Service.
Oct 10 23:44:49 terminal01 systemd[1]: Starting Flush Journal to Persistent Storage...
-- Subject: Unit systemd-journal-flush.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-journal-flush.service has begun starting up.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted /.snapshots.
-- Subject: Unit \x2esnapshots.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit \x2esnapshots.mount has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:49 terminal01 systemd[1]: Mounted /mnt/btrfs.
-- Subject: Unit mnt-btrfs.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mnt-btrfs.mount has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:49 terminal01 kernel: random: nonblocking pool is initialized
Oct 10 23:44:49 terminal01 systemd[1]: Started Flush Journal to Persistent Storage.
-- Subject: Unit systemd-journal-flush.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-journal-flush.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:49 terminal01 kernel: clocksource: Switched to clocksource tsc
Oct 10 23:44:49 terminal01 kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
Oct 10 23:44:49 terminal01 kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
Oct 10 23:44:49 terminal01 kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
Oct 10 23:44:49 terminal01 kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
Oct 10 23:44:49 terminal01 ntfs-3g[398]: Version 2015.3.14 external FUSE 29
Oct 10 23:44:49 terminal01 ntfs-3g[398]: Mounted /dev/sdb1 (Read-Write, label "Storage", NTFS 3.1)
Oct 10 23:44:49 terminal01 ntfs-3g[398]: Cmdline options: rw,nls=utf8,dmask=002,fmask=113,uid=1000,gid=1000,windows_names
Oct 10 23:44:49 terminal01 ntfs-3g[398]: Mount options: rw,nls=utf8,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sdb1,blkdev,blksize=4
Oct 10 23:44:49 terminal01 ntfs-3g[398]: Global ownership and permissions enforced, configuration type 7
Oct 10 23:44:49 terminal01 systemd[1]: Mounted /mnt/ntfs.
-- Subject: Unit mnt-ntfs.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mnt-ntfs.mount has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Mounted /home.
-- Subject: Unit home.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit home.mount has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Local File Systems.
-- Subject: Unit local-fs.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit local-fs.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Create Volatile Files and Directories...
-- Subject: Unit systemd-tmpfiles-setup.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-tmpfiles-setup.service has begun starting up.
Oct 10 23:44:50 terminal01 kernel: microcode: CPU0: new patch_level=0x06000832
Oct 10 23:44:50 terminal01 kernel: microcode: CPU2: new patch_level=0x06000832
Oct 10 23:44:50 terminal01 kernel: microcode: CPU4: new patch_level=0x06000832
Oct 10 23:44:50 terminal01 kernel: microcode: CPU6: new patch_level=0x06000832
Oct 10 23:44:50 terminal01 systemd[1]: Started Create Volatile Files and Directories.
-- Subject: Unit systemd-tmpfiles-setup.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-tmpfiles-setup.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
-- Subject: Unit systemd-update-utmp.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-update-utmp.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Network Time Synchronization...
-- Subject: Unit systemd-timesyncd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-timesyncd.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Started Update UTMP about System Boot/Shutdown.
-- Subject: Unit systemd-update-utmp.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-update-utmp.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Network Time Synchronization.
-- Subject: Unit systemd-timesyncd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-timesyncd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target System Time Synchronized.
-- Subject: Unit time-sync.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit time-sync.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target System Initialization.
-- Subject: Unit sysinit.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sysinit.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Listening on PC/SC Smart Card Daemon Activation Socket.
-- Subject: Unit pcscd.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit pcscd.socket has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Daily Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.timer has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-tmpfiles-clean.timer has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Daily man-db cache update.
-- Subject: Unit man-db.timer has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit man-db.timer has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
-- Subject: Unit avahi-daemon.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit avahi-daemon.socket has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Listening on D-Bus System Message Bus Socket.
-- Subject: Unit dbus.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dbus.socket has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Sockets.
-- Subject: Unit sockets.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sockets.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Restore Sound Card State...
-- Subject: Unit alsa-restore.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit alsa-restore.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Basic System.
-- Subject: Unit basic.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit basic.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
-- Subject: Unit avahi-daemon.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit avahi-daemon.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Permit User Sessions...
-- Subject: Unit systemd-user-sessions.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-user-sessions.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Started D-Bus System Message Bus.
-- Subject: Unit dbus.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dbus.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Successfully dropped root privileges.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: avahi-daemon 0.6.31 starting up.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Successfully called chroot().
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Successfully dropped remaining capabilities.
Oct 10 23:44:50 terminal01 avahi-daemon[415]: chroot.c: open() failed: No such file or directory
Oct 10 23:44:50 terminal01 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
-- Subject: Unit avahi-daemon.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit avahi-daemon.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Failed to open /etc/resolv.conf: Invalid argument
Oct 10 23:44:50 terminal01 systemd[1]: Starting Network Service...
-- Subject: Unit systemd-networkd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-networkd.service has begun starting up.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Loading service file /services/sftp-ssh.service.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Login Service...
-- Subject: Unit systemd-logind.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-logind.service has begun starting up.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Loading service file /services/ssh.service.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Dynamic Kernel Modules System...
-- Subject: Unit dkms.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dkms.service has begun starting up.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Network interface enumeration completed.
Oct 10 23:44:50 terminal01 systemd[1]: Started Periodic Command Scheduler.
-- Subject: Unit cronie.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit cronie.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Server startup complete. Host name is terminal01.local. Local service cookie is 1981470080.
Oct 10 23:44:50 terminal01 systemd[1]: Started Daily verification of password and group files.
-- Subject: Unit shadow.timer has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit shadow.timer has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Service "terminal01" (/services/ssh.service) successfully established.
Oct 10 23:44:50 terminal01 systemd[1]: Started Daily rotation of log files.
-- Subject: Unit logrotate.timer has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit logrotate.timer has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 avahi-daemon[410]: Service "terminal01" (/services/sftp-ssh.service) successfully established.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Timers.
-- Subject: Unit timers.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit timers.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Restore Sound Card State.
-- Subject: Unit alsa-restore.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit alsa-restore.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Permit User Sessions.
-- Subject: Unit systemd-user-sessions.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-user-sessions.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 crond[419]: (CRON) INFO (Syslog will be used instead of sendmail.)
Oct 10 23:44:50 terminal01 crond[419]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 68% if used.)
Oct 10 23:44:50 terminal01 crond[419]: (CRON) INFO (running with inotify support)
Oct 10 23:44:50 terminal01 systemd[1]: Started Getty on tty1.
-- Subject: Unit getty@tty1.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit getty@tty1.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Login Prompts.
-- Subject: Unit getty.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit getty.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Login Service.
-- Subject: Unit systemd-logind.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-logind.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd-logind[417]: New seat seat0.
-- Subject: A new seat seat0 is now available
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
--
-- A new seat seat0 has been configured and is now available.
Oct 10 23:44:50 terminal01 systemd-logind[417]: Watching system buttons on /dev/input/event4 (Power Button)
Oct 10 23:44:50 terminal01 systemd-logind[417]: Watching system buttons on /dev/input/event3 (Power Button)
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd-networkd[416]: Enumeration completed
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd-networkd[416]: enp5s0: Renamed to eth0
Oct 10 23:44:50 terminal01 systemd[1]: Started Network Service.
-- Subject: Unit systemd-networkd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-networkd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd-networkd[416]: eth0: Renamed to enp5s0
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Network.
-- Subject: Unit network.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit network.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Naming services LDAP client daemon....
-- Subject: Unit nslcd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nslcd.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd[1]: Starting Network Name Resolution...
-- Subject: Unit systemd-resolved.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-resolved.service has begun starting up.
Oct 10 23:44:50 terminal01 systemd[1]: Started VMware daemon.
-- Subject: Unit vmware.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit vmware.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started VMware USB Arbitrator.
-- Subject: Unit vmware-USBArbitrator.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit vmware-USBArbitrator.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Syncthing - Open Source Continuous File Synchronization for jimmy.
-- Subject: Unit syncthing@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit syncthing@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Syncthing Inotify File Watcher for jimmy.
-- Subject: Unit syncthing-inotify@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit syncthing-inotify@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Started OpenSSH Daemon.
-- Subject: Unit sshd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd-resolved[431]: Using system hostname 'terminal01'.
Oct 10 23:44:50 terminal01 systemd[1]: Started Dynamic Kernel Modules System.
-- Subject: Unit dkms.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dkms.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 vmware[433]: Starting VMware services:
Oct 10 23:44:50 terminal01 vmware[433]: [34B blob data]
Oct 10 23:44:50 terminal01 sshd[443]: error: Bind to port 22 on 10.0.0.50 failed: Cannot assign requested address.
Oct 10 23:44:50 terminal01 sshd[443]: fatal: Cannot bind any address.
Oct 10 23:44:50 terminal01 systemd[1]: sshd.service: Main process exited, code=exited, status=255/n/a
Oct 10 23:44:50 terminal01 nslcd[483]: version 0.9.6 starting
Oct 10 23:44:50 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:50 terminal01 systemd[1]: sshd.service: Failed with result 'exit-code'.
Oct 10 23:44:50 terminal01 nslcd[483]: accepting connections
Oct 10 23:44:50 terminal01 kernel: r8169 0000:05:00.0 enp5s0: link down
Oct 10 23:44:50 terminal01 kernel: r8169 0000:05:00.0 enp5s0: link down
Oct 10 23:44:50 terminal01 kernel: IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
Oct 10 23:44:50 terminal01 systemd[1]: Started Naming services LDAP client daemon..
-- Subject: Unit nslcd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nslcd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:50 terminal01 systemd[1]: Started Network Name Resolution.
-- Subject: Unit systemd-resolved.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-resolved.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Multi-User System.
-- Subject: Unit multi-user.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit multi-user.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Reached target Graphical Interface.
-- Subject: Unit graphical.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit graphical.target has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:50 terminal01 systemd[1]: Startup finished in 1.770s (kernel) + 2.079s (userspace) = 19.511s.
-- Subject: System start-up is now complete
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- All system services necessary queued for starting at boot have been
-- successfully started. Note that this does not mean that the machine is
-- now idle as services might still be busy with completing start-up.
--
-- Kernel start-up required 1770444 microseconds.
--
-- Initial RAM disk start-up required INITRD_USEC microseconds.
--
-- Userspace start-up required 2079956 microseconds.
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: syncthing v0.11.26 "Aluminium Ant" (go1.5.1 linux-amd64 default) builduser@svetlemodry 2015-10
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: My ID: WTB6NRH-R3K2YFM-5FZDL4T-MJKWE6S-YY2W5AQ-5MFN4UY-6EJEQZD-7F22VAF
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Database block cache capacity 65536 KiB
Oct 10 23:44:51 terminal01 syncthing-inotify[437]: [WARNING] Cannot connect to Syncthing: Get https://127.0.0.1:8384/rest/404: dial tcp 127.0.0.1:8384:
Oct 10 23:44:51 terminal01 kernel: Guest personality initialized and is inactive
Oct 10 23:44:51 terminal01 kernel: VMCI host device registered (name=vmci, major=10, minor=58)
Oct 10 23:44:51 terminal01 kernel: Initialized host personality
Oct 10 23:44:51 terminal01 vmware[433]: [49B blob data]
Oct 10 23:44:51 terminal01 kernel: NET: Registered protocol family 40
Oct 10 23:44:51 terminal01 vmware[433]: [50B blob data]
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:51 terminal01 systemd[1]: Stopped OpenSSH Daemon.
-- Subject: Unit sshd.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished shutting down.
Oct 10 23:44:51 terminal01 vmware[433]: [30B blob data]
Oct 10 23:44:51 terminal01 systemd[1]: Started OpenSSH Daemon.
-- Subject: Unit sshd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:51 terminal01 sshd[576]: error: Bind to port 22 on 10.0.0.50 failed: Cannot assign requested address.
Oct 10 23:44:51 terminal01 sshd[576]: fatal: Cannot bind any address.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Main process exited, code=exited, status=255/n/a
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Failed with result 'exit-code'.
Oct 10 23:44:51 terminal01 vmware[433]: [27B blob data]
Oct 10 23:44:51 terminal01 kernel: ppdev: user-space parallel port driver
Oct 10 23:44:51 terminal01 vmware[433]: [38B blob data]
Oct 10 23:44:51 terminal01 systemd[1]: vmware.service: Main process exited, code=exited, status=1/FAILURE
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:51 terminal01 systemd[1]: Stopped OpenSSH Daemon.
-- Subject: Unit sshd.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished shutting down.
Oct 10 23:44:51 terminal01 systemd[1]: Started OpenSSH Daemon.
-- Subject: Unit sshd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:51 terminal01 syncthing-inotify[437]: [WARNING] Cannot connect to Syncthing: Get https://127.0.0.1:8384/rest/404: dial tcp 127.0.0.1:8384:
Oct 10 23:44:51 terminal01 sshd[605]: error: Bind to port 22 on 10.0.0.50 failed: Cannot assign requested address.
Oct 10 23:44:51 terminal01 sshd[605]: fatal: Cannot bind any address.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Main process exited, code=exited, status=255/n/a
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Failed with result 'exit-code'.
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] OK: Ready to synchronize KTH (read-write)
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] OK: Ready to synchronize Other (read-write)
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] OK: Ready to synchronize android (read-write)
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Starting web GUI on https://127.0.0.1:8384/
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Completed initial scan (rw) of folder KTH
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Starting local discovery announcements
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Starting global discovery announcements
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Device WTB6NRH-R3K2YFM-5FZDL4T-MJKWE6S-YY2W5AQ-5MFN4UY-6EJEQZD-7F22VAF is "terminal01" at [dyn
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Device ZPZOYFV-ZEOYPW6-VYSGZHU-TTCLDCQ-2NINHJR-3S7D4QM-4GA5ISF-RUCFSAG is "sync" at [dynamic]
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Device T7QSXIJ-VX73XC4-YHKSVE6-IHDZWFI-2AYRJUO-Y56VMZ2-CNE3RQC-YOOTLQB is "terminal02" at [dyn
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: No UPnP device detected
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Starting usage reporting
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Local discovery (broadcast writer): write udp4 0.0.0.0:39842->255.255.255.255:21025: sendto: n
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: API listening on 127.0.0.1:8384
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Completed initial scan (rw) of folder Other
Oct 10 23:44:51 terminal01 syncthing[435]: [WTB6N] INFO: Completed initial scan (rw) of folder android
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:51 terminal01 systemd[1]: Stopped OpenSSH Daemon.
-- Subject: Unit sshd.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished shutting down.
Oct 10 23:44:51 terminal01 systemd[1]: Started OpenSSH Daemon.
-- Subject: Unit sshd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:51 terminal01 sshd[610]: error: Bind to port 22 on 10.0.0.50 failed: Cannot assign requested address.
Oct 10 23:44:51 terminal01 sshd[610]: fatal: Cannot bind any address.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Main process exited, code=exited, status=255/n/a
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:51 terminal01 systemd[1]: sshd.service: Failed with result 'exit-code'.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:52 terminal01 systemd[1]: Stopped OpenSSH Daemon.
-- Subject: Unit sshd.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished shutting down.
Oct 10 23:44:52 terminal01 systemd[1]: Started OpenSSH Daemon.
-- Subject: Unit sshd.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:52 terminal01 sshd[619]: error: Bind to port 22 on 10.0.0.50 failed: Cannot assign requested address.
Oct 10 23:44:52 terminal01 sshd[619]: fatal: Cannot bind any address.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Main process exited, code=exited, status=255/n/a
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Failed with result 'exit-code'.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:52 terminal01 systemd[1]: Stopped OpenSSH Daemon.
-- Subject: Unit sshd.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has finished shutting down.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Start request repeated too quickly.
Oct 10 23:44:52 terminal01 systemd[1]: Failed to start OpenSSH Daemon.
-- Subject: Unit sshd.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sshd.service has failed.
--
-- The result is failed.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Unit entered failed state.
Oct 10 23:44:52 terminal01 systemd[1]: sshd.service: Failed with result 'start-limit'.
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Watching android: /home/jimmy/Program/Syncthing/android
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Watching KTH: /home/jimmy/Program/Syncthing/KTH
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Watching Other: /home/jimmy/Program/Syncthing/Other
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Syncthing is indexing change in Other: [.stfolder]
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Syncthing is indexing change in KTH: [.stfolder]
Oct 10 23:44:52 terminal01 syncthing-inotify[437]: [OK] Syncthing is indexing change in android: [.stfolder]
Oct 10 23:44:53 terminal01 kernel: r8169 0000:05:00.0 enp5s0: link up
Oct 10 23:44:53 terminal01 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
Oct 10 23:44:53 terminal01 systemd-networkd[416]: enp5s0: Gained carrier
Oct 10 23:44:53 terminal01 systemd-timesyncd[406]: No network connectivity, watching for changes.
Oct 10 23:44:55 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:44:55 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:44:55 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:44:55 terminal01 avahi-daemon[410]: Registering new address record for fe80::96de:80ff:fe28:a04e on enp5s0.*.
Oct 10 23:44:55 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:55 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:44:55 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:55 terminal01 nslcd[483]: [8b4567] <group/member="jimmy"> failed to bind to LDAP server ldap://10.0.0.20/: Can't contact LDAP server: Tran
Oct 10 23:44:55 terminal01 nslcd[483]: [8b4567] <group/member="jimmy"> no available LDAP server found, sleeping 1 seconds
Oct 10 23:44:55 terminal01 systemd-networkd[416]: enp5s0: DHCPv4 address 10.0.0.50/24 via 10.0.0.1
Oct 10 23:44:55 terminal01 systemd-networkd[416]: enp5s0: Configured
Oct 10 23:44:55 terminal01 avahi-daemon[410]: Joining mDNS multicast group on interface enp5s0.IPv4 with address 10.0.0.50.
Oct 10 23:44:55 terminal01 avahi-daemon[410]: New relevant interface enp5s0.IPv4 for mDNS.
Oct 10 23:44:55 terminal01 avahi-daemon[410]: Registering new address record for 10.0.0.50 on enp5s0.IPv4.
Oct 10 23:44:56 terminal01 nslcd[483]: [7b23c6] <authc="jimmy"> connected to LDAP server ldap://10.0.0.20/
Oct 10 23:44:56 terminal01 login[420]: pam_unix(login:session): session opened for user jimmy by LOGIN(uid=0)
Oct 10 23:44:56 terminal01 systemd[1]: Created slice user-10000.slice.
-- Subject: Unit user-10000.slice has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit user-10000.slice has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[1]: Starting User Manager for UID 10000...
-- Subject: Unit user@10000.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit user@10000.service has begun starting up.
Oct 10 23:44:56 terminal01 systemd-logind[417]: New session c1 of user jimmy.
-- Subject: A new session c1 has been created for user jimmy
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
--
-- A new session with the ID c1 has been created for the user jimmy.
--
-- The leading process of the session is 420.
Oct 10 23:44:56 terminal01 systemd[1]: Started Session c1 of user jimmy.
-- Subject: Unit session-c1.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-c1.scope has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: pam_unix(systemd-user:session): session opened for user jimmy by (uid=0)
Oct 10 23:44:56 terminal01 systemd[631]: Reached target Timers.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Reached target Paths.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Listening on D-Bus User Message Bus Socket.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Listening on Sound System.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Reached target Sockets.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Reached target Basic System.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:56 terminal01 systemd[631]: Starting Emacs: the extensible, self-documenting text editor...
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Oct 10 23:44:56 terminal01 emacs[636]: Warning: due to a long standing Gtk+ bug
Oct 10 23:44:56 terminal01 emacs[636]: http://bugzilla.gnome.org/show_bug.cgi?id=85715
Oct 10 23:44:56 terminal01 emacs[636]: Emacs might crash when run in daemon mode and the X11 connection is unexpectedly lost.
Oct 10 23:44:56 terminal01 emacs[636]: Using an Emacs configured with --with-x-toolkit=lucid does not have this problem.
Oct 10 23:44:57 terminal01 dropbox[440]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:44:57 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:44:57 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:44:57 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:44:57 terminal01 dropbox[629]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:44:57 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:57 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:44:57 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:44:59 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:44:59 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:44:59 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:44:59 terminal01 dropbox[658]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:44:59 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:44:59 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:44:59 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:00 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:00 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:00 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:00 terminal01 dropbox[687]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:01 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:01 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:01 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:02 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:02 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:02 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:02 terminal01 dropbox[716]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:02 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:02 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:02 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:03 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:03 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:03 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:03 terminal01 dropbox[745]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:04 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:04 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:04 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:05 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:05 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:05 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:05 terminal01 dropbox[774]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:05 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:05 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:05 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:06 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:06 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:06 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:06 terminal01 dropbox[803]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:07 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:07 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:07 terminal01 systemd[1]: Started Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Main process exited, code=killed, status=9/KILL
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'signal'.
Oct 10 23:45:08 terminal01 dropbox[832]: !! (Qt:Fatal) QXcbConnection: Could not connect to display :0
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Service hold-off time over, scheduling restart.
Oct 10 23:45:08 terminal01 systemd[1]: Stopped Dropbox.
-- Subject: Unit dropbox@jimmy.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has finished shutting down.
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Start request repeated too quickly.
Oct 10 23:45:08 terminal01 systemd[1]: Failed to start Dropbox.
-- Subject: Unit dropbox@jimmy.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit dropbox@jimmy.service has failed.
--
-- The result is failed.
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Unit entered failed state.
Oct 10 23:45:08 terminal01 systemd[1]: dropbox@jimmy.service: Failed with result 'start-limit'.
Oct 10 23:45:21 terminal01 login[420]: pam_systemd(login:session): Failed to create session: Connection timed out
Oct 10 23:45:21 terminal01 login[420]: LOGIN ON tty1 BY jimmy
Oct 10 23:45:22 terminal01 systemd-timesyncd[406]: Synchronized to time server 10.0.0.30:123 (10.0.0.30).
Oct 10 23:45:32 terminal01 kernel: NVRM: Your system is not currently configured to drive a VGA console
Oct 10 23:45:32 terminal01 kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Oct 10 23:45:32 terminal01 kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
Oct 10 23:45:32 terminal01 kernel: NVRM: drivers including, but not limited to, vesafb, may result in
Oct 10 23:45:32 terminal01 kernel: NVRM: corruption and stability problems, and is not supported.
Oct 10 23:45:32 terminal01 kernel: snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 8
Oct 10 23:45:33 terminal01 dbus[412]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Oct 10 23:45:33 terminal01 systemd[1]: Starting Authorization Manager...
-- Subject: Unit polkit.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit polkit.service has begun starting up.
Oct 10 23:45:33 terminal01 polkitd[941]: Started polkitd version 0.113
Oct 10 23:45:33 terminal01 polkitd[941]: Loading rules from directory /etc/polkit-1/rules.d
Oct 10 23:45:33 terminal01 polkitd[941]: Loading rules from directory /usr/share/polkit-1/rules.d
Oct 10 23:45:33 terminal01 polkitd[941]: Finished loading, compiling and executing 1 rules
Oct 10 23:45:33 terminal01 dbus[412]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Oct 10 23:45:33 terminal01 systemd[1]: Started Authorization Manager.
-- Subject: Unit polkit.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit polkit.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:33 terminal01 polkitd[941]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Oct 10 23:45:33 terminal01 kernel: snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 52
Oct 10 23:45:33 terminal01 kernel: snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 19
Oct 10 23:45:33 terminal01 org.freedesktop.thumbnails.Thumbnailer1[938]: (tumblerd:985): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thum
Oct 10 23:45:33 terminal01 org.freedesktop.thumbnails.Thumbnailer1[938]: (tumblerd:985): tumbler-WARNING **: Failed to load plugin "tumbler-odf-thumbna
Oct 10 23:45:34 terminal01 org.freedesktop.thumbnails.Thumbnailer1[938]: (tumblerd:985): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbna
Oct 10 23:45:34 terminal01 dbus[412]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Oct 10 23:45:34 terminal01 systemd[1]: Starting Disk Manager...
-- Subject: Unit udisks2.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit udisks2.service has begun starting up.
Oct 10 23:45:34 terminal01 udisksd[1007]: udisks daemon version 2.1.6 starting
Oct 10 23:45:34 terminal01 dbus[412]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Oct 10 23:45:34 terminal01 systemd[1]: Started Disk Manager.
-- Subject: Unit udisks2.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit udisks2.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:34 terminal01 udisksd[1007]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Oct 10 23:45:34 terminal01 org.gtk.vfs.AfcVolumeMonitor[938]: Volume monitor alive
Oct 10 23:45:34 terminal01 dbus[412]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Oct 10 23:45:34 terminal01 systemd[1]: Starting Daemon for power management...
-- Subject: Unit upower.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit upower.service has begun starting up.
Oct 10 23:45:34 terminal01 dbus[412]: [system] Successfully activated service 'org.freedesktop.UPower'
Oct 10 23:45:34 terminal01 systemd[1]: Started Daemon for power management.
-- Subject: Unit upower.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit upower.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:45:34 terminal01 org.a11y.Bus[938]: Activating service name='org.a11y.atspi.Registry'
Oct 10 23:45:34 terminal01 org.a11y.Bus[938]: Successfully activated service 'org.a11y.atspi.Registry'
Oct 10 23:45:34 terminal01 org.a11y.atspi.Registry[1053]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 10 23:45:34 terminal01 polkitd[941]: Registered Authentication Agent for unix-session:c1 (system bus name :1.15 [/usr/lib/polkit-gnome/polkit-gnome
Oct 10 23:45:38 terminal01 systemd[1]: Started Getty on tty2.
-- Subject: Unit getty@tty2.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit getty@tty2.service has finished starting up.
--
-- The start-up result is done.
Oct 10 23:46:18 terminal01 sudo[1146]: jimmy : TTY=pts/1 ; PWD=/home/jimmy ; USER=root ; COMMAND=/usr/bin/systemctl --user
Oct 10 23:46:18 terminal01 sudo[1146]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 10 23:46:18 terminal01 sudo[1146]: pam_unix(sudo:session): session closed for user root
Oct 10 23:46:26 terminal01 systemd[631]: emacs.service: Start operation timed out. Terminating.
Oct 10 23:46:26 terminal01 systemd[1]: user@10000.service: Start operation timed out. Terminating.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped Emacs: the extensible, self-documenting text editor.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: emacs.service: Unit entered failed state.
Oct 10 23:46:26 terminal01 systemd[631]: emacs.service: Failed with result 'timeout'.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped target Default.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped target Basic System.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped target Paths.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped target Sockets.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Closed D-Bus User Message Bus Socket.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Closed Sound System.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Reached target Shutdown.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 10 23:46:26 terminal01 systemd[631]: Starting Exit the Session...
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Oct 10 23:46:26 terminal01 systemd[631]: Stopped target Timers.
-- Subject: Unit UNIT has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished shutting down.
Oct 10 23:46:26 terminal01 systemd[631]: Received SIGRTMIN+24 from PID 1149 (kill).
Oct 10 23:46:26 terminal01 systemd[633]: pam_unix(systemd-user:session): session closed for user jimmy
Oct 10 23:46:26 terminal01 systemd[1]: Failed to start User Manager for UID 10000.
-- Subject: Unit user@10000.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit user@10000.service has failed.
--
-- The result is failed.
Oct 10 23:46:26 terminal01 systemd[1]: user@10000.service: Unit entered failed state.
Oct 10 23:46:26 terminal01 systemd[1]: user@10000.service: Failed with result 'timeout'.
Oct 10 23:49:12 terminal01 sudo[1313]: jimmy : TTY=pts/0 ; PWD=/home/jimmy ; USER=root ; COMMAND=/usr/bin/systemctl --user
Oct 10 23:49:12 terminal01 sudo[1313]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 10 23:49:12 terminal01 sudo[1313]: pam_unix(sudo:session): session closed for user root
Oct 10 23:49:14 terminal01 sudo[1316]: jimmy : TTY=pts/0 ; PWD=/home/jimmy ; USER=root ; COMMAND=/usr/bin/su
Oct 10 23:49:14 terminal01 sudo[1316]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 10 23:49:17 terminal01 su[1317]: (to root) root on pts/0
Oct 10 23:52:48 terminal01 nslcd[483]: [4102b4] <passwd="*"> request denied by validnames option
Oct 10 23:52:49 terminal01 nslcd[483]: [bf9da8] <passwd="*"> request denied by validnames option
Oct 10 23:52:49 terminal01 nslcd[483]: [a2ecca] <passwd="*"> request denied by validnames option
Oct 10 23:56:28 terminal01 nslcd[483]: [3c7c99] <authc="jimmy"> uid=jimmy,ou=Users,dc=skynet,dc=net: Invalid credentials
Oct 10 23:56:28 terminal01 login[1096]: pam_ldap(login:auth): Authentication failure; user=jimmy
Oct 10 23:56:28 terminal01 login[1096]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty2 ruser= rhost= user=jimmy
Oct 10 23:56:30 terminal01 login[1096]: FAILED LOGIN 1 FROM tty2 FOR jimmy, Authentication failure
Oct 10 23:56:35 terminal01 login[1096]: pam_unix(login:session): session opened for user jimmy by LOGIN(uid=0)
Oct 10 23:56:35 terminal01 systemd-logind[417]: New session c2 of user jimmy.
-- Subject: A new session c2 has been created for user jimmy
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
--
-- A new session with the ID c2 has been created for the user jimmy.
--
-- The leading process of the session is 1096.
Oct 10 23:56:35 terminal01 systemd[1]: Started Session c2 of user jimmy.
-- Subject: Unit session-c2.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-c2.scope has finished starting up.
--
-- The start-up result is done.
Oct 10 23:56:35 terminal01 login[1096]: LOGIN ON tty2 BY jimmy
Oct 10 23:58:36 terminal01 sudo[1316]: pam_unix(sudo:session): session closed for user root
Oct 11 00:00:07 terminal01 systemd[1]: Starting Verify integrity of password and group files...
-- Subject: Unit shadow.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit shadow.service has begun starting up.
Oct 11 00:00:07 terminal01 systemd[1]: Starting Cleanup of Temporary Directories...
-- Subject: Unit systemd-tmpfiles-clean.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-tmpfiles-clean.service has begun starting up.
Oct 11 00:00:07 terminal01 systemd[1]: Starting Rotate log files...
-- Subject: Unit logrotate.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit logrotate.service has begun starting up.
Oct 11 00:00:07 terminal01 systemd[1]: Starting Update man-db cache...
-- Subject: Unit man-db.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit man-db.service has begun starting up.
Oct 11 00:00:07 terminal01 pwck[1420]: user 'test': directory '/home/test' does not exist
Oct 11 00:00:07 terminal01 pwck[1420]: user 'mysql': directory '/var/lib/mysql' does not exist
Oct 11 00:00:07 terminal01 pwck[1420]: user 'kvm': directory '/home/kvm' does not exist
Oct 11 00:00:07 terminal01 pwck[1420]: pwck: no changes
Oct 11 00:00:07 terminal01 systemd[1]: shadow.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:00:07 terminal01 systemd[1]: Failed to start Verify integrity of password and group files.
-- Subject: Unit shadow.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit shadow.service has failed.
--
-- The result is failed.
Oct 11 00:00:07 terminal01 systemd[1]: shadow.service: Unit entered failed state.
Oct 11 00:00:07 terminal01 systemd[1]: shadow.service: Failed with result 'exit-code'.
Oct 11 00:00:07 terminal01 systemd[1]: Started Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-tmpfiles-clean.service has finished starting up.
--
-- The start-up result is done.
Oct 11 00:00:07 terminal01 systemd[1]: Started Rotate log files.
-- Subject: Unit logrotate.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit logrotate.service has finished starting up.
--
-- The start-up result is done.
Oct 11 00:00:22 terminal01 systemd[1]: Started Update man-db cache.
-- Subject: Unit man-db.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit man-db.service has finished starting up.
--
-- The start-up result is done.
Oct 11 00:00:23 terminal01 sudo[9280]: jimmy : TTY=pts/0 ; PWD=/home/jimmy ; USER=root ; COMMAND=/usr/bin/systemctl --user
Oct 11 00:00:23 terminal01 sudo[9280]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 11 00:00:23 terminal01 sudo[9280]: pam_unix(sudo:session): session closed for user root
Oct 11 00:01:01 terminal01 CROND[10348]: (root) CMD (run-parts /etc/cron.hourly)
Oct 11 00:01:01 terminal01 anacron[10353]: Anacron started on 2015-10-11
Oct 11 00:01:01 terminal01 anacron[10353]: Normal exit (0 jobs run)
Oct 11 00:01:01 terminal01 dbus[412]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper)
Oct 11 00:01:01 terminal01 dbus[412]: [system] Successfully activated service 'org.opensuse.Snapper'Another (maybe related) problem I'm having is that when I start my computer I normally type in my username and password in the TTY1 terminal after which X is started automatically due to my .bashrc:
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx Now however I get a message about how it could not open display "default display", but if I type startx manually, it starts.
Also I should mention that I use ldap to login and I have uid 10000. The useraccount exists with the same uid in /etc/passwd. I also have another test account with uid 1000 that seems to login in without any problems and for that account systemctl --user seems to be working fine although that user does not have anything other that defaults configured.
Would appreciate any help to solve this issue!
Last edited by jfjallid (2015-10-11 08:27:19)
Offline
Related? https://bugs.archlinux.org/task/46374
I use startx (xorg-xinit package).
Some dbus erros like gnome-terminal won't open, solved for me copying /etc/X11/xinit/xinitrc to .xinitrc
Offline
Related? https://bugs.archlinux.org/task/46374
I use startx (xorg-xinit package).
Some dbus erros like gnome-terminal won't open, solved for me copying /etc/X11/xinit/xinitrc to .xinitrc
Does not seem to be related to the bug but I found what might have been the issue.
I had a systemd unit file for emacs as described in https://wiki.archlinux.org/index.php/Em … stemd_unit
located in ~/.config/systemd/user/emacs.service
When I removed it and rebooted the problem with startx and systemctl --user was gone.
So now the problem is that I can't run the emacs service. Is the method for adding the systemd unit outdated and can I add it in some other way?
Offline