Arch Linux

TheShade007

Member

Registered: 2015-09-29

Posts: 10

[SOLVED] smbd.service wont start after changing kernel

Earlier I used the linux core kernel which is 4.2.x , Now i'm using the linux-lts kernel as it is a AMD catalyst proprietary software dependancy.
Now whenener I start the smbd.service, it says ,

Job for smbd.service failed because the control process exited with error code. See "systemctl status smbd.service" and "journalctl -xe" for details.

status smbd.service output :

smbd.service - Samba SMB/CIFS server
   Loaded: loaded (/usr/lib/systemd/system/smbd.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Tue 2015-10-20 17:11:38 IST; 41s ago
  Process: 1410 ExecStart=/usr/bin/smbd -D (code=exited, status=1/FAILURE)

journalctl -xe output :

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
      Pass -q to turn off this notice.
-- The start-up result is done.
Oct 20 16:48:50 ArchPC dbus-daemon[683]: Successfully activated service 'org.fre
Oct 20 16:48:51 ArchPC dbus-daemon[683]: Activating via systemd: service name='o
Oct 20 16:48:51 ArchPC systemd[418]: Starting Virtual filesystem metadata servic
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
--
-- Unit UNIT has begun starting up.
Oct 20 16:48:51 ArchPC dbus-daemon[683]: Successfully activated service 'org.gtk
Oct 20 16:48:51 ArchPC systemd[418]: Started Virtual filesystem metadata service
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is done.
Oct 20 16:48:56 ArchPC gvfs-udisks2-volume-monitor[782]: disc.c:350: error openi
Oct 20 16:48:56 ArchPC gvfs-udisks2-volume-monitor[782]: disc.c:350: error openi
Oct 20 16:49:13 ArchPC dbus-daemon[683]: Activating service name='org.gnome.GCon
Oct 20 16:49:13 ArchPC dbus-daemon[683]: Successfully activated service 'org.gno
Oct 20 17:11:32 ArchPC polkit-agent-helper-1[1406]: pam_unix(polkit-1:auth): aut
lines 3317-3339/3339 (END)

Now earlier when I used the linux core kernel, it used to work fine..
Please help me regarding this issue
Thank You

Last edited by TheShade007 (2015-10-22 15:44:31)

Dude-man

Member

Registered: 2012-11-17

Posts: 43

Re: [SOLVED] smbd.service wont start after changing kernel

I'm using the latest kernel 4.2.3-1 and have a simular error disc.c:350

When I'm trying to mount sshfs via a resumt@user.service

arch gvfs-udisks2-volume-monitor[4962]: disc.c:350: error opening file BDMV/index.bdmv

perhaps related? sorry not any more useful

jasonwryan

Anarchist

From: .nz

Registered: 2009-05-09

Posts: 30,424

Website

Re: [SOLVED] smbd.service wont start after changing kernel

https://bbs.archlinux.org/viewtopic.php?id=203808

---

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

TheShade007

Member

Registered: 2015-09-29

Posts: 10

Re: [SOLVED] smbd.service wont start after changing kernel

ty guys for the reply..
the link which jasonwryan  gave says that smb is partially fixed, but in my case I cannot even start the smbd.service ..
hence the link was not at all of any use 
anyways thanks for trying..

EDIT : the output of systemctl --failed :

UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● nmbd.service                 loaded failed failed Samba NetBIOS name server
● smbd.service                 loaded failed failed Samba SMB/CIFS server
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

3 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

output of /usr/lib/systemd/systemd-modules-load :

Failed to find module 'vboxdrv'
Failed to find module 'vboxnetflt'
Failed to find module 'vboxnetadp'

Last edited by TheShade007 (2015-10-21 02:55:36)

Dude-man

Member

Registered: 2012-11-17

Posts: 43

Re: [SOLVED] smbd.service wont start after changing kernel

I downgraded to gvfs 1.26.0-3, rebooted and still the sshfs mounts don't work from the systemd service but work fine from command line

systemd[1]: Started User resume actions.
Oct 21 08:35:16 arch polkitd[3180]: Unregistered Authentication Agent for unix-process:5302:7561 (system bus name :1.56, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.utf8) (disconnected from bus)
Oct 21 08:35:16 arch mountnfs[5310]: Mount Videos
Oct 21 08:35:16 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:16 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv
Oct 21 08:35:16 arch /py3status[4704]: user method net_speed failed ('eth0:' is not in list)
Oct 21 08:35:16 arch /py3status[4704]: user method net_traffic failed ('eth0:' is not in list)
Oct 21 08:35:16 arch mountnfs[5310]: done
Oct 21 08:35:16 arch mountnfs[5310]: Mount Documents
Oct 21 08:35:17 arch mountnfs[5310]: Mount Music
Oct 21 08:35:17 arch mountnfs[5310]: Mount OurVIdeos
Oct 21 08:35:17 arch mountnfs[5310]: Mount Pictures
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv
Oct 21 08:35:17 arch org.mate.panel.applet.MultiLoadAppletFactory[4395]: glibtop(c=4937): [WARNING] statvfs '/home/dudman/Documents' failed: Input/output error
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/index.bdmv
Oct 21 08:35:17 arch org.gtk.vfs.UDisks2VolumeMonitor[4395]: disc.c:350: error opening file BDMV/BACKUP/index.bdmv

TheShade007

Member

Registered: 2015-09-29

Posts: 10

Re: [SOLVED] smbd.service wont start after changing kernel

So Dude-man, you believe this is a bug of gvfs??
ok then I think we should wait till the problem gets fixed or downgrade..
I think I will wait tills devs fix the issue.
Please post to this thread as soon as the bug gets fixed.

TheShade007

Member

Registered: 2015-09-29

Posts: 10

Re: [SOLVED] smbd.service wont start after changing kernel

SOLVED!!
The latest samba update fixes the issue..
Thank You guys for all the help.. and cheers to the devs

Dude-man

Member

Registered: 2012-11-17

Posts: 43

Re: [SOLVED] smbd.service wont start after changing kernel

TheShade007 Don't know really but I'm upto date and still have the same error message... and running the mount script, just a bunch of sshfs lines works ok. So I'll post back here if anything changes and wait on up stream.