You are not logged in.

#1 2015-10-28 15:52:49

TheChickenMan
Member
From: United States
Registered: 2015-07-25
Posts: 353

[SOLVED] linux4.2.4-1 No Video Output

I have a number of HP6400 laptops running Arch. With the update to the kernel version 4.2.4-1 video output stopped working. The computers do boot successfully and I was able to grab output from dmesg via ssh. The computers all work fine when I revert to to the previous kernel version (4.2.3-1). Video does display properly during BIOS and grub but the screen shuts off when the kernel loads.

diff of dmesg working vs not working
Left: Working linux-4.2.3-1 Right: Not Working linux-4.2.4-1

Initializing cgroup subsys cpuset				Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu					Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct				Initializing cgroup subsys cpuacct
Linux version 4.2.3-1-ARCH (builduser@tobias) (gcc version 5. |	Linux version 4.2.4-1-ARCH (builduser@tobias) (gcc version 5.
Disabled fast string operations					Disabled fast string operations
x86/fpu: Legacy x87 FPU detected.				x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.			x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:				e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable	BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserv	BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserv
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserv	BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserv
BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable	BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable
BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffe55ff] reserv	BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffe55ff] reserv
BIOS-e820: [mem 0x000000003ffe5600-0x000000003fff7fff] ACPI N	BIOS-e820: [mem 0x000000003ffe5600-0x000000003fff7fff] ACPI N
BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] reserv	BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] reserv
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserv	BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserv
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserv	BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserv
BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserv	BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserv
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserv	BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserv
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserv	BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserv
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserv	BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserv
Notice: NX (Execute Disable) protection cannot be enabled: no	Notice: NX (Execute Disable) protection cannot be enabled: no
SMBIOS 2.4 present.						SMBIOS 2.4 present.
DMI: Hewlett-Packard HP Compaq nc6400 (RE924US#ABA)/30AC, BIO	DMI: Hewlett-Packard HP Compaq nc6400 (RE924US#ABA)/30AC, BIO
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved	e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable			e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x100000		e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
MTRR default type: uncachable					MTRR default type: uncachable
MTRR fixed ranges enabled:					MTRR fixed ranges enabled:
  00000-9FFFF write-back					  00000-9FFFF write-back
  A0000-BFFFF uncachable					  A0000-BFFFF uncachable
  C0000-CFFFF write-protect					  C0000-CFFFF write-protect
  D0000-EFFFF uncachable					  D0000-EFFFF uncachable
  F0000-FFFFF write-protect					  F0000-FFFFF write-protect
MTRR variable ranges enabled:					MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back			  0 base 000000000 mask FC0000000 write-back
  1 base 0FEDA0000 mask FFFFE0000 uncachable			  1 base 0FEDA0000 mask FFFFE0000 uncachable
  2 disabled							  2 disabled
  3 disabled							  3 disabled
  4 disabled							  4 disabled
  5 disabled							  5 disabled
  6 disabled							  6 disabled
  7 disabled							  7 disabled
x86/PAT: PAT not supported by CPU.				x86/PAT: PAT not supported by CPU.
Scanning 1 areas for low memory corruption			Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01bfffff]		initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384		Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]		init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k				 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37000000-0x373fffff]		init_memory_mapping: [mem 0x37000000-0x373fffff]
 [mem 0x37000000-0x373fffff] page 4M				 [mem 0x37000000-0x373fffff] page 4M
init_memory_mapping: [mem 0x00100000-0x36ffffff]		init_memory_mapping: [mem 0x00100000-0x36ffffff]
 [mem 0x00100000-0x003fffff] page 4k				 [mem 0x00100000-0x003fffff] page 4k
 [mem 0x00400000-0x36ffffff] page 4M				 [mem 0x00400000-0x36ffffff] page 4M
init_memory_mapping: [mem 0x37400000-0x377fdfff]		init_memory_mapping: [mem 0x37400000-0x377fdfff]
 [mem 0x37400000-0x377fdfff] page 4k				 [mem 0x37400000-0x377fdfff] page 4k
BRK [0x01817000, 0x01817fff] PGTABLE			      |	BRK [0x0181d000, 0x0181dfff] PGTABLE
RAMDISK: [mem 0x37740000-0x37b97fff]				RAMDISK: [mem 0x37740000-0x37b97fff]
Allocated new RAMDISK: [mem 0x372e8000-0x3773f7df]	      |	Allocated new RAMDISK: [mem 0x372e8000-0x3773f93f]
Move RAMDISK from [mem 0x37740000-0x37b977df] to [mem 0x372e8 |	Move RAMDISK from [mem 0x37740000-0x37b9793f] to [mem 0x372e8
ACPI: Early table checksum verification disabled		ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7870 000024 (v02 HP    )		ACPI: RSDP 0x00000000000F7870 000024 (v02 HP    )
ACPI: XSDT 0x000000003FFE57C4 000074 (v01 HPQOEM SLIC-MPC 000	ACPI: XSDT 0x000000003FFE57C4 000074 (v01 HPQOEM SLIC-MPC 000
ACPI: FACP 0x000000003FFE5684 0000F4 (v04 HP     30AC     000	ACPI: FACP 0x000000003FFE5684 0000F4 (v04 HP     30AC     000
ACPI: DSDT 0x000000003FFE5AC0 0104BB (v01 HP     nc6400   000	ACPI: DSDT 0x000000003FFE5AC0 0104BB (v01 HP     nc6400   000
ACPI: FACS 0x000000003FFF7E80 000040				ACPI: FACS 0x000000003FFF7E80 000040
ACPI: FACS 0x000000003FFF7E80 000040				ACPI: FACS 0x000000003FFF7E80 000040
ACPI: SLIC 0x000000003FFE5838 000176 (v01 HPQOEM SLIC-MPC 000	ACPI: SLIC 0x000000003FFE5838 000176 (v01 HPQOEM SLIC-MPC 000
ACPI: HPET 0x000000003FFE59B0 000038 (v01 HP     30AC     000	ACPI: HPET 0x000000003FFE59B0 000038 (v01 HP     30AC     000
ACPI: APIC 0x000000003FFE59E8 000068 (v01 HP     30AC     000	ACPI: APIC 0x000000003FFE59E8 000068 (v01 HP     30AC     000
ACPI: MCFG 0x000000003FFE5A50 00003C (v01 HP     30AC     000	ACPI: MCFG 0x000000003FFE5A50 00003C (v01 HP     30AC     000
ACPI: TCPA 0x000000003FFE5A8C 000032 (v02 HP     30AC     000	ACPI: TCPA 0x000000003FFE5A8C 000032 (v02 HP     30AC     000
ACPI: SSDT 0x000000003FFF5F7B 00032D (v01 HP     HPQSAT   000	ACPI: SSDT 0x000000003FFF5F7B 00032D (v01 HP     HPQSAT   000
ACPI: SSDT 0x000000003FFF6ABB 00025F (v01 HP     Cpu0Tst  000	ACPI: SSDT 0x000000003FFF6ABB 00025F (v01 HP     Cpu0Tst  000
ACPI: SSDT 0x000000003FFF6D1A 0000A6 (v01 HP     Cpu1Tst  000	ACPI: SSDT 0x000000003FFF6D1A 0000A6 (v01 HP     Cpu1Tst  000
ACPI: SSDT 0x000000003FFF6DC0 0004D7 (v01 HP     CpuPm    000	ACPI: SSDT 0x000000003FFF6DC0 0004D7 (v01 HP     CpuPm    000
ACPI: Local APIC address 0xfee00000				ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.					135MB HIGHMEM available.
887MB LOWMEM available.						887MB LOWMEM available.
  mapped low ram: 0 - 377fe000					  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000						  low ram: 0 - 377fe000
BRK [0x01818000, 0x01818fff] PGTABLE			      |	BRK [0x0181e000, 0x0181efff] PGTABLE
Zone ranges:							Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]		  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x00000000377fdfff]		  Normal   [mem 0x0000000001000000-0x00000000377fdfff]
  HighMem  [mem 0x00000000377fe000-0x000000003ffcffff]		  HighMem  [mem 0x00000000377fe000-0x000000003ffcffff]
Movable zone start for each node				Movable zone start for each node
Early memory node ranges					Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]		  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000003ffcffff]		  node   0: [mem 0x0000000000100000-0x000000003ffcffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffcff	Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffcff
On node 0 totalpages: 261998					On node 0 totalpages: 261998
free_area_init_node: node 0, pgdat c168d380, node_mem_map f68 |	free_area_init_node: node 0, pgdat c1693380, node_mem_map f68
  DMA zone: 40 pages used for memmap				  DMA zone: 40 pages used for memmap
  DMA zone: 0 pages reserved					  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0				  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 2180 pages used for memmap			  Normal zone: 2180 pages used for memmap
  Normal zone: 223230 pages, LIFO batch:31			  Normal zone: 223230 pages, LIFO batch:31
  HighMem zone: 34770 pages, LIFO batch:7			  HighMem zone: 34770 pages, LIFO batch:7
Using APIC driver default					Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008					ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000				ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])		ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])		ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-2	IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-2
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)	ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)	ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.					ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.					ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information		Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000			ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs			smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]	PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]	PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]	PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]	PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x40000000-0xfebfffff] available for PCI devices	e820: [mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware			Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0x	clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0x
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_nod	setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_nod
PERCPU: Embedded 17 pages/cpu @f77d5000 s39756 r0 d29876 u696	PERCPU: Embedded 17 pages/cpu @f77d5000 s39756 r0 d29876 u696
pcpu-alloc: s39756 r0 d29876 u69632 alloc=17*4096		pcpu-alloc: s39756 r0 d29876 u69632 alloc=17*4096
pcpu-alloc: [0] 0 [0] 1 					pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total	Built 1 zonelists in Zone order, mobility grouping on.  Total
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID	Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID
PID hash table entries: 4096 (order: 2, 16384 bytes)		PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 byt	Dentry cache hash table entries: 131072 (order: 7, 524288 byt
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes	Inode-cache hash table entries: 65536 (order: 6, 262144 bytes
Initializing CPU#0						Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003ffd0)		Initializing HighMem for node 0 (000377fe:0003ffd0)
Initializing Movable for node 0 (00000000:00000000)		Initializing Movable for node 0 (00000000:00000000)
Memory: 1023976K/1047992K available (4908K kernel code, 505K  |	Memory: 1023952K/1047992K available (4926K kernel code, 509K 
virtual kernel memory layout:					virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)		    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)		    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)		    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)		    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc16a4000 - 0xc173a000   ( 600 kB)	      |	      .init : 0xc16aa000 - 0xc1740000   ( 600 kB)
      .data : 0xc14cb617 - 0xc16a2440   (1883 kB)	      |	      .data : 0xc14cfe57 - 0xc16a8440   (1889 kB)
      .text : 0xc1000000 - 0xc14cb617   (4909 kB)	      |	      .text : 0xc1000000 - 0xc14cfe57   (4927 kB)
Checking if this processor honours the WP bit even in supervi	Checking if this processor honours the WP bit even in supervi
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1	SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.			Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.			Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.		RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2	RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 16					NR_IRQS:2304 nr_irqs:440 16
CPU 0 irqstacks, hard=f6434000 soft=f6436000			CPU 0 irqstacks, hard=f6434000 soft=f6436000
Console: colour dummy device 80x25				Console: colour dummy device 80x25
console [tty0] enabled						console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, m	clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, m
hpet clockevent registered					hpet clockevent registered
tsc: Fast TSC calibration using PIT				tsc: Fast TSC calibration using PIT
tsc: Detected 1662.406 MHz processor			      |	tsc: Detected 1662.501 MHz processor
Calibrating delay loop (skipped), value calculated using time |	Calibrating delay loop (skipped), value calculated using time
pid_max: default: 32768 minimum: 301				pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619					ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired			ACPI: All ACPI Tables successfully acquired
Security Framework initialized					Security Framework initialized
Yama: becoming mindful.						Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)	Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 byt	Mountpoint-cache hash table entries: 2048 (order: 1, 8192 byt
Initializing cgroup subsys blkio				Initializing cgroup subsys blkio
Initializing cgroup subsys memory				Initializing cgroup subsys memory
Initializing cgroup subsys devices				Initializing cgroup subsys devices
Initializing cgroup subsys freezer				Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls				Initializing cgroup subsys net_cls
Disabled fast string operations					Disabled fast string operations
CPU: Physical Processor ID: 0					CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0					CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks					mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI				CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads				process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2			Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0		Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 20K (c173a000 - c173f000)    |	Freeing SMP alternatives memory: 20K (c1740000 - c1745000)
ftrace: allocating 20753 entries in 41 pages		      |	ftrace: allocating 20816 entries in 41 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs			Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1		..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Genuine Intel(R) CPU           T2300  @ 1.66GH	smpboot: CPU0: Genuine Intel(R) CPU           T2300  @ 1.66GH
Performance Events: Core events, core PMU driver.		Performance Events: Core events, core PMU driver.
... version:                1					... version:                1
... bit width:              40					... bit width:              40
... generic registers:      2					... generic registers:      2
... value mask:             000000ffffffffff			... value mask:             000000ffffffffff
... max period:             000000007fffffff			... max period:             000000007fffffff
... fixed-purpose events:   0					... fixed-purpose events:   0
... event mask:             0000000000000003			... event mask:             0000000000000003
NMI watchdog: enabled on all CPUs, permanently consumes one h	NMI watchdog: enabled on all CPUs, permanently consumes one h
CPU 1 irqstacks, hard=f6548000 soft=f654a000			CPU 1 irqstacks, hard=f6548000 soft=f654a000
x86: Booting SMP configuration:					x86: Booting SMP configuration:
.... node  #0, CPUs:      #1					.... node  #0, CPUs:      #1
Initializing CPU#1						Initializing CPU#1
Disabled fast string operations					Disabled fast string operations
CPU1: Thermal monitoring handled by SMI				CPU1: Thermal monitoring handled by SMI
x86: Booted up 1 node, 2 CPUs					x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6652.69 BogoMIPS)   |	smpboot: Total of 2 processors activated (6652.08 BogoMIPS)
devtmpfs: initialized						devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3ffe5600-0x3fff7fff] (	PM: Registering ACPI NVS region [mem 0x3ffe5600-0x3fff7fff] (
reboot: HP Compaq Laptop series board detected. Selecting BIO	reboot: HP Compaq Laptop series board detected. Selecting BIO
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff	clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff
pinctrl core: initialized pinctrl subsystem			pinctrl core: initialized pinctrl subsystem
RTC time: 10:49:15, date: 10/28/15			      |	RTC time: 15:31:56, date: 10/28/15
NET: Registered protocol family 16				NET: Registered protocol family 16
cpuidle: using governor ladder					cpuidle: using governor ladder
cpuidle: using governor menu					cpuidle: using governor menu
ACPI: bus type PCI registered					ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5	acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-	PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-
PCI: not using MMCONFIG						PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32	PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
PCI: Using configuration type 1 for base access			PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings		mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.		mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.					mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)					ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)				ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)				ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)			ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:					ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6559200 0001FB (v01 HP     Cpu0Ist  000 |	ACPI: SSDT 0x00000000F6559000 0001FB (v01 HP     Cpu0Ist  000
ACPI: Dynamic OEM Table Load:					ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6411800 0004CB (v01 HP     Cpu0Cst  000	ACPI: SSDT 0x00000000F6411800 0004CB (v01 HP     Cpu0Cst  000
ACPI: Dynamic OEM Table Load:					ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6513200 0000C8 (v01 HP     Cpu1Ist  000 |	ACPI: SSDT 0x00000000F651A000 0000C8 (v01 HP     Cpu1Ist  000
ACPI: Dynamic OEM Table Load:					ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F650D600 000085 (v01 HP     Cpu1Cst  000 |	ACPI: SSDT 0x00000000F650F600 000085 (v01 HP     Cpu1Cst  000
ACPI : EC: EC started						ACPI : EC: EC started
ACPI: Interpreter enabled					ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\	ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\	ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\
ACPI: (supports S0 S3 S4 S5)					ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing			ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-	PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI	PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI
PCI: Using MMCONFIG for extended config space			PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, us	PCI: Ignoring host bridge windows from ACPI; if necessary, us
[Firmware Bug]: ACPI: No _BQC method, cannot determine initia	[Firmware Bug]: ACPI: No _BQC method, cannot determine initia
ACPI: Power Resource [C1ED] (off)				ACPI: Power Resource [C1ED] (off)
ACPI: Power Resource [C1F5] (on)				ACPI: Power Resource [C1F5] (on)
ACPI: Power Resource [C1FC] (on)				ACPI: Power Resource [C1FC] (on)
ACPI: Power Resource [C219] (on)				ACPI: Power Resource [C219] (on)
ACPI: Power Resource [C221] (on)				ACPI: Power Resource [C221] (on)
ACPI: Power Resource [C32A] (off)				ACPI: Power Resource [C32A] (off)
ACPI: Power Resource [C32B] (off)				ACPI: Power Resource [C32B] (off)
ACPI: Power Resource [C32C] (off)				ACPI: Power Resource [C32C] (off)
ACPI: Power Resource [C32D] (off)				ACPI: Power Resource [C32D] (off)
ACPI: Power Resource [C32E] (off)				ACPI: Power Resource [C32E] (off)
ACPI: Power Resource [C32F] (off)				ACPI: Power Resource [C32F] (off)
ACPI: Power Resource [C330] (off)				ACPI: Power Resource [C330] (off)
ACPI: Power Resource [C331] (off)				ACPI: Power Resource [C331] (off)
ACPI: Power Resource [C332] (off)				ACPI: Power Resource [C332] (off)
ACPI: Power Resource [C333] (off)				ACPI: Power Resource [C333] (off)
ACPI: Power Resource [C334] (off)				ACPI: Power Resource [C334] (off)
ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])		ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM Clock	acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM Clock
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM	acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7 window	acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7 window
acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff window	acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff window
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bfff	acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bfff
acpi PNP0A08:00: host bridge window [mem 0x40000000-0xfedffff	acpi PNP0A08:00: host bridge window [mem 0x40000000-0xfedffff
acpi PNP0A08:00: host bridge window [mem 0xfee01000-0xfffffff	acpi PNP0A08:00: host bridge window [mem 0xfee01000-0xfffffff
acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dfff	acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dfff
PCI: root bus 00: using default resources			PCI: root bus 00: using default resources
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [b	acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [b
PCI host bridge to bus 0000:00					PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]			pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]		pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff	pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000		pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400		pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold		pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300		pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe4700000-0xe4703fff 64bit]	pci 0000:00:1b.0: reg 0x10: [mem 0xe4700000-0xe4703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold		pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400		pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold		pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI		pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400		pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold		pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI		pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400		pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold		pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI		pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300		pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]			pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300		pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]			pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
pci 0000:00:1d.1: System wakeup disabled by ACPI		pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300		pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]			pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
pci 0000:00:1d.2: System wakeup disabled by ACPI		pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300		pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]			pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
pci 0000:00:1d.3: System wakeup disabled by ACPI		pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320		pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe4704000-0xe47043ff]		pci 0000:00:1d.7: reg 0x10: [mem 0xe4704000-0xe47043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold		pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI		pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401		pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI		pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100		pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: add	pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: add
pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 	pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (m	pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (m
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (m	pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (m
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (m	pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (m
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a		pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]			pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]			pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]			pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]			pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]			pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x0	pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x0
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]	pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0	pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]	pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601		pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x13f0-0x13f7]			pci 0000:00:1f.2: reg 0x10: [io  0x13f0-0x13f7]
pci 0000:00:1f.2: reg 0x14: [io  0x15f4-0x15f7]			pci 0000:00:1f.2: reg 0x14: [io  0x15f4-0x15f7]
pci 0000:00:1f.2: reg 0x18: [io  0x1370-0x1377]			pci 0000:00:1f.2: reg 0x18: [io  0x1370-0x1377]
pci 0000:00:1f.2: reg 0x1c: [io  0x1574-0x1577]			pci 0000:00:1f.2: reg 0x1c: [io  0x1574-0x1577]
pci 0000:00:1f.2: reg 0x20: [io  0x50b0-0x50bf]			pci 0000:00:1f.2: reg 0x20: [io  0x50b0-0x50bf]
pci 0000:00:1f.2: reg 0x24: [mem 0xe4705000-0xe47053ff]		pci 0000:00:1f.2: reg 0x24: [mem 0xe4705000-0xe47053ff]
pci 0000:00:1f.2: PME# supported from D3hot			pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1002:714a] type 00 class 0x030000		pci 0000:01:00.0: [1002:714a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]	pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:00.0: reg 0x14: [io  0x4000-0x40ff]			pci 0000:01:00.0: reg 0x14: [io  0x4000-0x40ff]
pci 0000:01:00.0: reg 0x18: [mem 0xe4600000-0xe460ffff]		pci 0000:01:00.0: reg 0x18: [mem 0xe4600000-0xe460ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]	pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2				pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You	pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You
pci 0000:00:01.0: PCI bridge to [bus 01]			pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]		pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xe4600000-0xe46fffff]	pci 0000:00:01.0:   bridge window [mem 0xe4600000-0xe46fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 	pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 
pci 0000:08:00.0: [14e4:16fd] type 00 class 0x020000		pci 0000:08:00.0: [14e4:16fd] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xe4100000-0xe410ffff 64bit]	pci 0000:08:00.0: reg 0x10: [mem 0xe4100000-0xe410ffff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold		pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI		pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You	pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You
pci 0000:00:1c.0: PCI bridge to [bus 08]			pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]	pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:10:00.0: [8086:4222] type 00 class 0x028000		pci 0000:10:00.0: [8086:4222] type 00 class 0x028000
pci 0000:10:00.0: reg 0x10: [mem 0xe4000000-0xe4000fff]		pci 0000:10:00.0: reg 0x10: [mem 0xe4000000-0xe4000fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold		pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: System wakeup disabled by ACPI		pci 0000:10:00.0: System wakeup disabled by ACPI
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You	pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You
pci 0000:00:1c.1: PCI bridge to [bus 10]			pci 0000:00:1c.1: PCI bridge to [bus 10]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]	pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
acpiphp: Slot [1] registered					acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 20]			pci 0000:00:1c.3: PCI bridge to [bus 20]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]		pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]	pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:02:06.0: [104c:8039] type 02 class 0x060700		pci 0000:02:06.0: [104c:8039] type 02 class 0x060700
pci 0000:02:06.0: reg 0x10: [mem 0xe4200000-0xe4200fff]		pci 0000:02:06.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
pci 0000:02:06.0: supports D1 D2				pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot		pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.2: [104c:803b] type 00 class 0x018000		pci 0000:02:06.2: [104c:803b] type 00 class 0x018000
pci 0000:02:06.2: reg 0x10: [mem 0xe4201000-0xe4201fff]		pci 0000:02:06.2: reg 0x10: [mem 0xe4201000-0xe4201fff]
pci 0000:02:06.2: supports D1 D2				pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot		pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.3: [104c:803c] type 00 class 0x080500		pci 0000:02:06.3: [104c:803c] type 00 class 0x080500
pci 0000:02:06.3: reg 0x10: [mem 0xe4202000-0xe42020ff]		pci 0000:02:06.3: reg 0x10: [mem 0xe4202000-0xe42020ff]
pci 0000:02:06.3: supports D1 D2				pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot		pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.4: [104c:803d] type 00 class 0x078000		pci 0000:02:06.4: [104c:803d] type 00 class 0x078000
pci 0000:02:06.4: reg 0x10: [mem 0xe4203000-0xe4203fff]		pci 0000:02:06.4: reg 0x10: [mem 0xe4203000-0xe4203fff]
pci 0000:02:06.4: reg 0x14: [mem 0xe4204000-0xe4204fff]		pci 0000:02:06.4: reg 0x14: [mem 0xe4204000-0xe4204fff]
pci 0000:02:06.4: supports D1 D2				pci 0000:02:06.4: supports D1 D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot		pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive deco	pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive deco
pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]	pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtra	pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtra
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff]	pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff]
pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [	pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06	pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [	pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [
pci_bus 0000:03: [bus 03-06] partially hidden behind transpar	pci_bus 0000:03: [bus 03-06] partially hidden behind transpar
pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06	pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
pci_bus 0000:00: on NUMA node 0					pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)			ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)			ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)			ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C111] (IRQs 10 11) *5			ACPI: PCI Interrupt Link [C111] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C124] (IRQs *10 11)			ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
ACPI: PCI Interrupt Link [C125] (IRQs *10 11)			ACPI: PCI Interrupt Link [C125] (IRQs *10 11)
ACPI: PCI Interrupt Link [C126] (IRQs 10 *11)			ACPI: PCI Interrupt Link [C126] (IRQs 10 *11)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20150619/pci_l	ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20150619/pci_l
ACPI: Enabled 7 GPEs in block 00 to 1F				ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x6	ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x6
vgaarb: setting as boot device: PCI:0000:01:00.0		vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io	vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io
vgaarb: loaded							vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0			vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing					PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes			PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]		e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]		e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]
NetLabel: Initializing						NetLabel: Initializing
NetLabel:  domain hash size = 128				NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4			NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default			NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu ti	HPET: 3 timers in total, 0 timers will be used for per-cpu ti
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0				hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter		hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet			clocksource: Switched to clocksource hpet
pnp: PnP ACPI init						pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserv	system 00:00: [mem 0x00000000-0x0009ffff] could not be reserv
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserv	system 00:00: [mem 0x000e0000-0x000fffff] could not be reserv
system 00:00: [mem 0x00100000-0x3fffffff] could not be reserv	system 00:00: [mem 0x00100000-0x3fffffff] could not be reserv
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)	system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 3]						pnp 00:01: [dma 3]
pnp 00:01: Plug and Play ACPI device, IDs SMCf010 PNP0511 (ac	pnp 00:01: Plug and Play ACPI device, IDs SMCf010 PNP0511 (ac
pnp 00:02: [dma 1]						pnp 00:02: [dma 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)	pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (ac	pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (ac
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)	pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)	pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN0122 SYN0100 SYN	pnp 00:06: Plug and Play ACPI device, IDs SYN0122 SYN0100 SYN
system 00:07: [io  0x0500-0x055f] has been reserved		system 00:07: [io  0x0500-0x055f] has been reserved
system 00:07: [io  0x0800-0x080f] has been reserved		system 00:07: [io  0x0800-0x080f] has been reserved
system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved	system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved	system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)	system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x04d0-0x04d1] has been reserved		system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x1000-0x107f] could not be reserved		system 00:08: [io  0x1000-0x107f] could not be reserved
system 00:08: [io  0x1100-0x113f] has been reserved		system 00:08: [io  0x1100-0x113f] has been reserved
system 00:08: [io  0x1200-0x121f] has been reserved		system 00:08: [io  0x1200-0x121f] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved	system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfec00000-0xfec000ff] could not be reserv	system 00:08: [mem 0xfec00000-0xfec000ff] could not be reserv
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved	system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved	system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed9afff] has been reserved	system 00:08: [mem 0xfed90000-0xfed9afff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)	system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000cfc00-0x000cffff] has been reserved	system 00:09: [mem 0x000cfc00-0x000cffff] has been reserved
system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved	system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved	system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)	system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices					pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, ma	clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, ma
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0	pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64	pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 1	pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 1
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64	pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64	pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64
pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res 	pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res 
pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res 	pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res 
pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 0	pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 0
pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignme	pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignme
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pr	pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pr
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pr	pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pr
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pr	pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pr
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pr	pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pr
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pr	pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pr
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pr	pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pr
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res 	pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res 
pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res 	pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res 
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res 	pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res 
pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res 	pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res 
pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res 	pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res 
pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res 	pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res 
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff	pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff
pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff	pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff
pci 0000:00:1c.3: BAR 15: assigned [mem 0x40400000-0x405fffff	pci 0000:00:1c.3: BAR 15: assigned [mem 0x40400000-0x405fffff
pci 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]		pci 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x7000-0x7fff]		pci 0000:00:1c.1: BAR 13: assigned [io  0x7000-0x7fff]
pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]		pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe4620000-0xe463ffff 	pci 0000:01:00.0: BAR 6: assigned [mem 0xe4620000-0xe463ffff 
pci 0000:00:01.0: PCI bridge to [bus 01]			pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]		pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xe4600000-0xe46fffff]	pci 0000:00:01.0:   bridge window [mem 0xe4600000-0xe46fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 	pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 
pci 0000:00:1c.0: PCI bridge to [bus 08]			pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]		pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]	pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 	pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 
pci 0000:00:1c.1: PCI bridge to [bus 10]			pci 0000:00:1c.1: PCI bridge to [bus 10]
pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]		pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]	pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff 	pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff 
pci 0000:00:1c.3: PCI bridge to [bus 20]			pci 0000:00:1c.3: PCI bridge to [bus 20]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]		pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]	pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.3:   bridge window [mem 0x40400000-0x405fffff 	pci 0000:00:1c.3:   bridge window [mem 0x40400000-0x405fffff 
pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] re	pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] re
pci 0000:02:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] re	pci 0000:02:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] re
pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_	pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_
pci 0000:02:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_	pci 0000:02:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_
pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res 	pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res 
pci 0000:02:06.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res 	pci 0000:02:06.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res 
pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res 	pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res 
pci 0000:02:06.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res 	pci 0000:02:06.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res 
pci 0000:02:06.0: BAR 15: assigned [mem 0xe8000000-0xebffffff	pci 0000:02:06.0: BAR 15: assigned [mem 0xe8000000-0xebffffff
pci 0000:02:06.0: BAR 16: assigned [mem 0xec000000-0xefffffff	pci 0000:02:06.0: BAR 16: assigned [mem 0xec000000-0xefffffff
pci 0000:02:06.0: BAR 13: assigned [io  0x8000-0x80ff]		pci 0000:02:06.0: BAR 13: assigned [io  0x8000-0x80ff]
pci 0000:02:06.0: BAR 14: assigned [io  0x8400-0x84ff]		pci 0000:02:06.0: BAR 14: assigned [io  0x8400-0x84ff]
pci 0000:02:06.0: CardBus bridge to [bus 03-06]			pci 0000:02:06.0: CardBus bridge to [bus 03-06]
pci 0000:02:06.0:   bridge window [io  0x8000-0x80ff]		pci 0000:02:06.0:   bridge window [io  0x8000-0x80ff]
pci 0000:02:06.0:   bridge window [io  0x8400-0x84ff]		pci 0000:02:06.0:   bridge window [io  0x8400-0x84ff]
pci 0000:02:06.0:   bridge window [mem 0xe8000000-0xebffffff 	pci 0000:02:06.0:   bridge window [mem 0xe8000000-0xebffffff 
pci 0000:02:06.0:   bridge window [mem 0xec000000-0xefffffff]	pci 0000:02:06.0:   bridge window [mem 0xec000000-0xefffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]			pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]		pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]	pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]			pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]		pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]			pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xe4600000-0xe46fffff]		pci_bus 0000:01: resource 1 [mem 0xe4600000-0xe46fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit 	pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit 
pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]			pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xe4100000-0xe41fffff]		pci_bus 0000:08: resource 1 [mem 0xe4100000-0xe41fffff]
pci_bus 0000:08: resource 2 [mem 0x40000000-0x401fffff 64bit 	pci_bus 0000:08: resource 2 [mem 0x40000000-0x401fffff 64bit 
pci_bus 0000:10: resource 0 [io  0x7000-0x7fff]			pci_bus 0000:10: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]		pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
pci_bus 0000:10: resource 2 [mem 0x40200000-0x403fffff 64bit 	pci_bus 0000:10: resource 2 [mem 0x40200000-0x403fffff 64bit 
pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]			pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]		pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:20: resource 2 [mem 0x40400000-0x405fffff 64bit 	pci_bus 0000:20: resource 2 [mem 0x40400000-0x405fffff 64bit 
pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]			pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]		pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]			pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]		pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x8000-0x80ff]			pci_bus 0000:03: resource 0 [io  0x8000-0x80ff]
pci_bus 0000:03: resource 1 [io  0x8400-0x84ff]			pci_bus 0000:03: resource 1 [io  0x8400-0x84ff]
pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]	pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]
pci_bus 0000:03: resource 3 [mem 0xec000000-0xefffffff]		pci_bus 0000:03: resource 3 [mem 0xec000000-0xefffffff]
NET: Registered protocol family 2				NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 byt	TCP established hash table entries: 8192 (order: 3, 32768 byt
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)	TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)	TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)		UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)	UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1				NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM		pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64					PCI: CLS 64 bytes, default 64
Unpacking initramfs...						Unpacking initramfs...
Freeing initrd memory: 4448K (f72e8000 - f7740000)		Freeing initrd memory: 4448K (f72e8000 - f7740000)
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39		microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39		microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fs	microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fs
apm: BIOS not found.						apm: BIOS not found.
Scanning for low memory corruption every 60 seconds		Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)		futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring				Initialise system trusted keyring
HugeTLB registered 4 MB page size, pre-allocated 0 pages	HugeTLB registered 4 MB page size, pre-allocated 0 pages
zpool: loaded							zpool: loaded
zbud: loaded							zbud: loaded
VFS: Disk quotas dquot_6.6.0					VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 byte	VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 byte
Key type big_key registered					Key type big_key registered
bounce: pool size: 64 pages					bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (maj	Block layer SCSI generic (bsg) driver version 0.4 loaded (maj
io scheduler noop registered					io scheduler noop registered
io scheduler deadline registered				io scheduler deadline registered
io scheduler cfq registered (default)				io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5			pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4	pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0		vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw					vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0			vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd8000000, mapped to 0xf8400000, usin	vesafb: framebuffer at 0xd8000000, mapped to 0xf8400000, usin
Console: switching to colour frame buffer device 128x48		Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device				fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 14			intel_idle: does not run on family 6 model 14
GHES: HEST is not enabled!					GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...				isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found				isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled	Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:01: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 	00:01: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 
serial 00:01: disabled						serial 00:01: disabled
Failed to find cpu0 device node					Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0		Unable to detect cache hierarchy from DT for CPU 0
rtc_cmos 00:04: RTC can wake from S4				rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0		rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram,	rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram,
ledtrig-cpu: registered to indicate activity on CPUs		ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10				NET: Registered protocol family 10
NET: Registered protocol family 17				NET: Registered protocol family 17
Using IPI No-Shortcut mode					Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates				Loading compiled-in X.509 certificates
registered taskstats version 1					registered taskstats version 1
zswap: loading zswap						zswap: loading zswap
zswap: using zbud pool						zswap: using zbud pool
zswap: using lzo compressor					zswap: using lzo compressor
  Magic number: 3:975:831				      |	  Magic number: 3:199:539
rtc_cmos 00:04: setting system clock to 2015-10-28 10:49:16 U |	rtc_cmos 00:04: setting system clock to 2015-10-28 15:31:57 U
PM: Hibernation image not present or could not be loaded.	PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 600K (c16a4000 - c173a000)      |	Freeing unused kernel memory: 600K (c16aa000 - c1740000)
Write protecting the kernel text: 4912k			      |	Write protecting the kernel text: 4928k
Write protecting the kernel read-only data: 1376k	      |	Write protecting the kernel read-only data: 1380k
random: systemd-tmpfile urandom read with 1 bits of entropy a	random: systemd-tmpfile urandom read with 1 bits of entropy a
i8042: PNP: PS/2 Controller [PNP0303:C216,PNP0f13:C217] at 0x	i8042: PNP: PS/2 Controller [PNP0303:C216,PNP0f13:C217] at 0x
i8042: Detected active multiplexing controller, rev 1.1		i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1			serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12			serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12			serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12			serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12			serio: i8042 AUX3 port at 0x60,0x64 irq 12
							      >	SCSI subsystem initialized
							      >	sdhci: Secure Digital Host Controller Interface driver
							      >	sdhci: Copyright(c) Pierre Ossman
							      >	sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (r
							      >	sdhci-pci 0000:02:06.3: No vmmc regulator found
							      >	sdhci-pci 0000:02:06.3: No vqmmc regulator found
ACPI: bus type USB registered					ACPI: bus type USB registered
usbcore: registered new interface driver usbfs			usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub			usbcore: registered new interface driver hub
usbcore: registered new device driver usb			usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver	ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver	uhci_hcd: USB Universal Host Controller Interface driver
							      >	mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
uhci_hcd 0000:00:1d.0: UHCI Host Controller			uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus n	uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus n
uhci_hcd 0000:00:1d.0: detected 2 ports				uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000		uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
							      >	libata version 3.00 loaded.
hub 1-0:1.0: USB hub found					hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected					hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller			uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus n	uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus n
uhci_hcd 0000:00:1d.1: detected 2 ports				uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020		uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020
ehci-pci: EHCI PCI platform driver			      <
hub 2-0:1.0: USB hub found					hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected					hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller			uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus n	uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus n
uhci_hcd 0000:00:1d.2: detected 2 ports				uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040		uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
hub 3-0:1.0: USB hub found					hub 3-0:1.0: USB hub found
SCSI subsystem initialized				      <
sdhci: Secure Digital Host Controller Interface driver	      <
sdhci: Copyright(c) Pierre Ossman			      <
hub 3-0:1.0: 2 ports detected					hub 3-0:1.0: 2 ports detected
sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (r <
sdhci-pci 0000:02:06.3: No vmmc regulator found		      <
sdhci-pci 0000:02:06.3: No vqmmc regulator found	      <
uhci_hcd 0000:00:1d.3: UHCI Host Controller			uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus n	uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus n
uhci_hcd 0000:00:1d.3: detected 2 ports				uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060		uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
libata version 3.00 loaded.				      <
mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO	      <
hub 4-0:1.0: USB hub found					hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected					hub 4-0:1.0: 2 ports detected
							      >	ahci 0000:00:1f.2: version 3.0
							      >	ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
							      >	ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0
							      >	ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp 
							      >	ehci-pci: EHCI PCI platform driver
							      >	scsi host0: ahci
							      >	scsi host1: ahci
							      >	scsi host2: ahci
							      >	tifm_core: MMC/SD card detected in socket 0:1
							      >	scsi host3: ahci
							      >	ata1: SATA max UDMA/133 abar m1024@0xe4705000 port 0xe4705100
							      >	ata2: DUMMY
							      >	ata3: DUMMY
							      >	ata4: DUMMY
							      >	ata_piix 0000:00:1f.1: version 2.13
							      >	scsi host4: ata_piix
							      >	scsi host5: ata_piix
							      >	ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 
							      >	ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 
ehci-pci 0000:00:1d.7: EHCI Host Controller			ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus n	ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus n
ehci-pci 0000:00:1d.7: debug port 1				ehci-pci 0000:00:1d.7: debug port 1
							      >	ata6: port disabled--ignoring
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported	ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xe4704000		ehci-pci 0000:00:1d.7: irq 20, io mem 0xe4704000
tifm_core: MMC/SD card detected in socket 0:1		      <
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00		ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found					hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected					hub 5-0:1.0: 8 ports detected
hub 1-0:1.0: USB hub found					hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected					hub 1-0:1.0: 2 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i804	input: AT Translated Set 2 keyboard as /devices/platform/i804
hub 2-0:1.0: USB hub found					hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected					hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found					hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected					hub 3-0:1.0: 2 ports detected
hub 4-0:1.0: USB hub found					hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected					hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13			      |	ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, HP13, max MWDMA2
scsi host0: ata_piix					      |	ata5.00: configured for MWDMA2
scsi host1: ata_piix					      <
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq  <
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq  <
ahci 0000:00:1f.2: version 3.0				      <
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled   <
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0 <
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp  <
ata2: port disabled--ignoring				      <
scsi host2: ahci					      <
scsi host3: ahci					      <
scsi host4: ahci					      <
scsi host5: ahci					      <
ata3: SATA max UDMA/133 abar m1024@0xe4705000 port 0xe4705100 <
ata4: DUMMY						      <
ata5: DUMMY						      <
ata6: DUMMY						      <
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, HP13, max MWDMA2   <
ata1.00: configured for MWDMA2				      <
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N HP1 <
tsc: Refined TSC clocksource calibration: 1662.499 MHz		tsc: Refined TSC clocksource calibration: 1662.499 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6	clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6
							      >	ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
							      >	ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
							      >	ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION 
							      >	ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) su
							      >	ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtere
usb 2-1: new full-speed USB device number 2 using uhci_hcd	usb 2-1: new full-speed USB device number 2 using uhci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)	      |	ata1.00: ATA-7: WDC WD600BEVS-75LAT0, 02.06M02, max UDMA/133
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) |	ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 1), AA
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION  |	ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) su |	ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION 
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtere |	ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) su
ata3.00: ATA-7: WDC WD600BEVS-75LAT0, 02.06M02, max UDMA/133  |	ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtere
ata3.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 1), AA |	ata1.00: configured for UDMA/133
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) |	scsi 0:0:0:0: Direct-Access     ATA      WDC WD600BEVS-75 6M0
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION  |	scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N HP1
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) su |	sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtere |	sd 0:0:0:0: [sda] Write Protect is off
ata3.00: configured for UDMA/133			      |	sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access     ATA      WDC WD600BEVS-75 6M0 |	sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
sd 2:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB |	sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/
sd 2:0:0:0: [sda] Write Protect is off			      <
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00		      <
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,  <
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/ <
cdrom: Uniform CD-ROM driver Revision: 3.20			cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0			      |	sr 4:0:0:0: Attached scsi CD-ROM sr0
 sda: sda1 sda2 sda3						 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk			      |	sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Op	EXT4-fs (sda1): mounted filesystem with ordered data mode. Op
clocksource: Switched to clocksource tsc			clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized				random: nonblocking pool is initialized
ip_tables: (C) 2000-2006 Netfilter Core Team			ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT 	systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT 
systemd[1]: Detected architecture x86.				systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to <MAX14-2>.				systemd[1]: Set hostname to <MAX14-2>.
							      >	systemd[1]: Listening on udev Control Socket.
							      >	systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Set up automount Arbitrary Executable File Format	systemd[1]: Set up automount Arbitrary Executable File Format
systemd[1]: Listening on Journal Socket (/dev/log).	      |	systemd[1]: Listening on udev Kernel Socket.
							      >	systemd[1]: Listening on /dev/initctl Compatibility Named Pip
systemd[1]: Listening on Journal Socket.			systemd[1]: Listening on Journal Socket.
							      >	systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.		systemd[1]: Created slice User and Session Slice.
							      >	systemd[1]: Reached target Encrypted Volumes.
							      >	systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice System Slice.				systemd[1]: Created slice System Slice.
							      >	systemd[1]: Mounting Temporary Directory...
							      >	systemd[1]: Starting Setup Virtual Console...
							      >	systemd[1]: Starting Journal Service...
							      >	systemd[1]: Mounting Configuration File System...
							      >	systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Create list of required static device no	systemd[1]: Starting Create list of required static device no
systemd[1]: Mounting Debug File System...		      <
systemd[1]: Mounting POSIX Message Queue File System...		systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice system-getty.slice.		      <
systemd[1]: Listening on Device-mapper event daemon FIFOs.    <
systemd[1]: Starting Setup Virtual Console...		      <
systemd[1]: Started Dispatch Password Requests to Console Dir <
systemd[1]: Starting Set Up Additional Binary Formats...      <
systemd[1]: Reached target Remote File Systems.		      <
systemd[1]: Listening on udev Kernel Socket.		      <
systemd[1]: Listening on /dev/initctl Compatibility Named Pip <
systemd[1]: Reached target Encrypted Volumes.		      <
systemd[1]: Starting Remount Root and Kernel File Systems...	systemd[1]: Starting Remount Root and Kernel File Systems...
EXT4-fs (sda1): re-mounted. Opts: data=ordered		      |	systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Huge Pages File System...		      |	systemd[1]: Started Dispatch Password Requests to Console Dir
systemd[1]: Created slice system-systemd\x2dfsck.slice.	      <
systemd[1]: Mounting Temporary Directory...		      <
systemd[1]: Reached target Slices.				systemd[1]: Reached target Slices.
systemd[1]: Listening on LVM2 metadata daemon socket.	      |	systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...			      <
systemd[1]: Mounting Configuration File System...	      <
systemd[1]: Started Forward Password Requests to Wall Directo	systemd[1]: Started Forward Password Requests to Wall Directo
systemd[1]: Starting Apply Kernel Variables...		      |	systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.		      |	systemd[1]: Mounting Debug File System...
systemd[1]: Mounted Debug File System.			      |	systemd[1]: Created slice system-systemd\x2dfsck.slice.
							      >	systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Mounted POSIX Message Queue File System.		systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.		      |	systemd[1]: Mounted Debug File System.
							      >	systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted Temporary Directory.			systemd[1]: Mounted Temporary Directory.
							      >	systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nod	systemd[1]: Started Create list of required static device nod
systemd[1]: Started Setup Virtual Console.			systemd[1]: Started Setup Virtual Console.
							      >	EXT4-fs (sda1): re-mounted. Opts: data=ordered
systemd[1]: Started Remount Root and Kernel File Systems.	systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount  |	systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Configuration File System.		      <
systemd[1]: Mounting Arbitrary Executable File Formats File S <
systemd[1]: Starting udev Coldplug all Devices...		systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...			systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create Static Device Nodes in /dev...    |	systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount 
							      >	systemd[1]: Mounting Arbitrary Executable File Formats File S
systemd[1]: Mounted Arbitrary Executable File Formats File Sy	systemd[1]: Mounted Arbitrary Executable File Formats File Sy
							      >	systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Apply Kernel Variables.			systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Load/Save Random Seed.			systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started udev Coldplug all Devices.		      <
systemd[1]: Started Set Up Additional Binary Formats.		systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Create Static Device Nodes in /dev.		systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...		systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).		systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started udev Kernel Device Manager.			systemd[1]: Started udev Kernel Device Manager.
tsc: Marking TSC unstable due to TSC halts in idle		tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle				ACPI: acpi_idle registered with cpuidle
clocksource: Switched to clocksource hpet			clocksource: Switched to clocksource hpet
Linux agpgart interface v0.103				      <
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C	input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C
ACPI: Sleep Button [C242]					ACPI: Sleep Button [C242]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D	input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D
ACPI: Lid Switch [C23A]						ACPI: Lid Switch [C23A]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input	input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input
ACPI: Power Button [PWRF]					ACPI: Power Button [PWRF]
							      >	Linux agpgart interface v0.103
ACPI: AC Adapter [C1B8] (on-line)				ACPI: AC Adapter [C1B8] (on-line)
NET: Registered protocol family 23			      <
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4  <
[Firmware Bug]: _BCQ is used instead of _BQC			[Firmware Bug]: _BCQ is used instead of _BQC
ACPI: Video Device [C12F] (multi-head: yes  rom: no  post: no	ACPI: Video Device [C12F] (multi-head: yes  rom: no  post: no
[Firmware Bug]: ACPI: No _BQC method, cannot determine initia	[Firmware Bug]: ACPI: No _BQC method, cannot determine initia
acpi device:02: registered as cooling_device2			acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:	input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:
							      >	NET: Registered protocol family 23
							      >	found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47
							      >	smsc_superio_flat(): fir: 0x00, sir: 0x00, dma: 15, irq: 0, m
							      >	shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
thermal LNXTHERM:00: registered as thermal_zone0		thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (55 C)					ACPI: Thermal Zone [TZ0] (55 C)
thermal LNXTHERM:01: registered as thermal_zone1		thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (56 C)				      |	ACPI: Thermal Zone [TZ1] (51 C)
parport_pc 00:02: reported by Plug and Play ACPI	      <
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]		      <
ACPI: Battery Slot [C1BA] (battery present)		      <
ACPI: Battery Slot [C1B9] (battery absent)		      <
thermal LNXTHERM:02: registered as thermal_zone2		thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ2] (57 C)				      |	ACPI: Thermal Zone [TZ2] (53 C)
thermal LNXTHERM:03: registered as thermal_zone3		thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (48 C)				      |	ACPI: Thermal Zone [TZ3] (44 C)
							      >	ACPI: Battery Slot [C1BA] (battery present)
							      >	ACPI: Battery Slot [C1B9] (battery absent)
							      >	wmi: Mapper loaded
thermal LNXTHERM:04: registered as thermal_zone4		thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (31 C)					ACPI: Thermal Zone [TZ4] (31 C)
thermal LNXTHERM:05: registered as thermal_zone5	      <
ACPI: Thermal Zone [TZ5] (33 C)				      <
found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47 <
smsc_superio_flat(): fir: 0x00, sir: 0x00, dma: 15, irq: 0, m <
wmi: Mapper loaded					      <
tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)		tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
							      >	thermal LNXTHERM:05: registered as thermal_zone5
							      >	ACPI: Thermal Zone [TZ5] (48 C)
							      >	hp_accel: hardware type NC64x0 found
							      >	lis3lv02d: 12 bits sensor found
tpm_tis 00:03: [Hardware Error]: Adjusting reported timeouts:	tpm_tis 00:03: [Hardware Error]: Adjusting reported timeouts:
tpm_tis 00:03: Adjusting TPM timeout parameters.		tpm_tis 00:03: Adjusting TPM timeout parameters.
							      >	input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3l
intel_rng: FWH not detected					intel_rng: FWH not detected
pps_core: LinuxPPS API ver. 1 registered			pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo G	pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo G
PTP clock support registered					PTP clock support registered
							      >	tg3.c:v3.137 (May 11, 2014)
							      >	tpm_tis 00:03: TPM is disabled/deactivated (0x7)
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ac]	yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ac]
yenta_cardbus 0000:02:06.0: Enabling burst memory read transa	yenta_cardbus 0000:02:06.0: Enabling burst memory read transa
yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interru	yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interru
yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI	yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64	yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
hp_accel: hardware type NC64x0 found			      |	parport_pc 00:02: reported by Plug and Play ACPI
lis3lv02d: 12 bits sensor found				      |	parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18   <
yenta_cardbus 0000:02:06.0: Socket status: 30000006	      <
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) <
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: <
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff <
 excluding 0x8000-0x80ff 0x8400-0x84ff			      <
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: <
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe <
 excluding 0xe4200000-0xe423ffff			      <
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3l <
tpm_tis 00:03: TPM is disabled/deactivated (0x7)	      <
tg3.c:v3.137 (May 11, 2014)				      <
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4201] (P	tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4201] (P
tg3 0000:08:00.0 eth0: attached PHY is 5750 (10/100/1000Base-	tg3 0000:08:00.0 eth0: attached PHY is 5750 (10/100/1000Base-
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[	tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[
tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]	tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI Warning: SystemIO range 0x0000000000001028-0x00000000000	ACPI Warning: SystemIO range 0x0000000000001028-0x00000000000
ACPI: If an ACPI driver is available for this device, you sho	ACPI: If an ACPI driver is available for this device, you sho
ACPI Warning: SystemIO range 0x0000000000001130-0x00000000000	ACPI Warning: SystemIO range 0x0000000000001130-0x00000000000
ACPI: If an ACPI driver is available for this device, you sho	ACPI: If an ACPI driver is available for this device, you sho
ACPI Warning: SystemIO range 0x0000000000001100-0x00000000000	ACPI Warning: SystemIO range 0x0000000000001100-0x00000000000
ACPI: If an ACPI driver is available for this device, you sho	ACPI: If an ACPI driver is available for this device, you sho
lpc_ich: Resource conflict(s) found affecting gpio_ich		lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found				leds_ss4200: no LED devices found
input: PC Speaker as /devices/platform/pcspkr/input/input10   |	yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
systemd[1]: Found device WDC_WD600BEVS-75LAT0 SWAP.	      |	yenta_cardbus 0000:02:06.0: Socket status: 30000006
systemd[1]: Activating swap /dev/disk/by-uuid/16f5df4f-ce73-4 |	pci_bus 0000:02: Raising subordinate bus# of parent bus (#02)
[drm] Initialized drm 1.1.0 20060810			      |	yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window:
Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 acr |	pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff
systemd[1]: Activated swap /dev/disk/by-uuid/16f5df4f-ce73-4f |	 excluding 0x8000-0x80ff 0x8400-0x84ff
systemd[1]: Reached target Swap.			      |	yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window:
							      >	pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe
							      >	 excluding 0xe4200000-0xe423ffff
							      >	input: PC Speaker as /devices/platform/pcspkr/input/input14
snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line	snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line
snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/	snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/
snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x6/0x0/0x0/0	snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x6/0x0/0x0/0
snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0		snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_analog hdaudioC0D0:    inputs:			snd_hda_codec_analog hdaudioC0D0:    inputs:
snd_hda_codec_analog hdaudioC0D0:      Mic=0x8			snd_hda_codec_analog hdaudioC0D0:      Mic=0x8
snd_hda_codec_analog hdaudioC0D0:      Internal Mic=0x18	snd_hda_codec_analog hdaudioC0D0:      Internal Mic=0x18
snd_hda_codec_analog hdaudioC0D0:      Line=0x9			snd_hda_codec_analog hdaudioC0D0:      Line=0x9
							      >	psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x
							      >	psmouse serio4: synaptics: serio: Synaptics pass-through port
							      >	input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/
							      >	[drm] Initialized drm 1.1.0 20060810
							      >	ppdev: user-space parallel port driver
							      >	iTCO_vendor_support: vendor-support=0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0	input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/soun	input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/soun
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sou	input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sou
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.	input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.
ppdev: user-space parallel port driver			      |	iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection 
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x |	iwl3945: Copyright(c) 2003-2011 Intel Corporation
psmouse serio4: synaptics: serio: Synaptics pass-through port |	iwl3945 0000:10:00.0: can't disable ASPM; OS doesn't have ASP
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/ <
input: HP WMI hotkeys as /devices/virtual/input/input20		input: HP WMI hotkeys as /devices/virtual/input/input20
mousedev: PS/2 mouse device common for all mice		      |	iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
							      >	iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCO
							      >	iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
							      >	iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.1
							      >	iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945A
							      >	tg3 0000:08:00.0 enp8s0: renamed from eth0
							      >	systemd[1]: Reached target Sound Card.
							      >	systemd[1]: Listening on Load/Save RF Kill Switch Status /dev
							      >	systemd[1]: Starting Load/Save RF Kill Switch Status...
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:	pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
 excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f			 excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:	pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
 excluding 0x3f0-0x3f7 0x4d0-0x4d7				 excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:	pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
 clean								 clean
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:	pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
 clean								 clean
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0ff	pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0ff
 excluding 0xc0000-0xcffff 0xe0000-0xfffff			 excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa	pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa
 clean								 clean
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x6	pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x6
 clean								 clean
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:	pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
 clean								 clean
systemd[1]: Found device WDC_WD600BEVS-75LAT0 HOME.	      <
systemd[1]: Starting File System Check on /dev/disk/by-uuid/8 <
systemd[1]: Reached target Sound Card.			      <
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev <
systemd[1]: Starting Load/Save RF Kill Switch Status...	      <
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection  <
iwl3945: Copyright(c) 2003-2011 Intel Corporation	      <
iwl3945 0000:10:00.0: can't disable ASPM; OS doesn't have ASP <
iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.1 <
iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945A <
tg3 0000:08:00.0 enp8s0: renamed from eth0		      <
iTCO_vendor_support: vendor-support=0			      <
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'	ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945 0000:10:00.0 wlp16s0: renamed from wlan0		iwl3945 0000:10:00.0 wlp16s0: renamed from wlan0
							      >	mousedev: PS/2 mouse device common for all mice
[drm] radeon kernel modesetting enabled.			[drm] radeon kernel modesetting enabled.
checking generic (d8000000 300000) vs hw (d8000000 8000000)	checking generic (d8000000 300000) vs hw (d8000000 8000000)
fb: switching to radeondrmfb from VESA VGA			fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25			Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV515 0x1002:0x714A 0x	[drm] initializing kernel modesetting (RV515 0x1002:0x714A 0x
[drm] register mmio base: 0xE4600000				[drm] register mmio base: 0xE4600000
[drm] register mmio size: 65536					[drm] register mmio size: 65536
ATOM BIOS: M52T							ATOM BIOS: M52T
[drm] Generation 2 PCI interface, using max accessible memory	[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x000000	radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x000000
radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000	radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000
[drm] Detected VRAM RAM=128M, BAR=128M				[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR					[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 444982 kiB     |	[TTM] Zone  kernel: Available graphics memory: 444970 kiB
[TTM] Zone highmem: Available graphics memory: 514522 kiB     |	[TTM] Zone highmem: Available graphics memory: 514510 kiB
[TTM] Initializing pool allocator				[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator				[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready				[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.				[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072		[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: power management initialized			[drm] radeon: power management initialized
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11		      <
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCO <
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)	      <
[drm] radeon: 1 quad pipes, 1 z pipes initialized.		[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000)	[drm] PCIE GART of 512M enabled (table at 0x0000000000040000)
radeon 0000:01:00.0: WB enabled					radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00 |	radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).	[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.		[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit		radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.					[drm] radeon: irq initialized.
[drm] Loading R500 Microcode					[drm] Loading R500 Microcode
							      >	systemd[1]: Started Load/Save RF Kill Switch Status.
[drm] radeon: ring at 0x0000000008001000			[drm] radeon: ring at 0x0000000008001000
[drm] ring test succeeded in 9 usecs				[drm] ring test succeeded in 9 usecs
[drm] ib test succeeded in 0 usecs				[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors					[drm] Radeon Display Connectors
[drm] Connector 0:						[drm] Connector 0:
[drm]   VGA-1							[drm]   VGA-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c	[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
[drm]   Encoders:						[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1				[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:						[drm] Connector 1:
[drm]   LVDS-1							[drm]   LVDS-1
[drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c	[drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c
[drm]   Encoders:						[drm]   Encoders:
[drm]     LCD1: INTERNAL_LVTM1					[drm]     LCD1: INTERNAL_LVTM1
[drm] Connector 2:						[drm] Connector 2:
[drm]   SVIDEO-1						[drm]   SVIDEO-1
[drm]   Encoders:						[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2				[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:						[drm] Connector 3:
[drm]   DVI-I-1							[drm]   DVI-I-1
[drm]   HPD1							[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c	[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
[drm]   Encoders:						[drm]   Encoders:
[drm]     DFP1: INTERNAL_KLDSCP_TMDS1				[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[drm] fb mappable at 0xD80C0000					[drm] fb mappable at 0xD80C0000
[drm] vram apper at 0xD8000000					[drm] vram apper at 0xD8000000
[drm] size 4096000						[drm] size 4096000
[drm] fb depth is 24						[drm] fb depth is 24
[drm]    pitch is 5120						[drm]    pitch is 5120
fbcon: radeondrmfb (fb0) is primary device			fbcon: radeondrmfb (fb0) is primary device
							      >	systemd[1]: Found device WDC_WD600BEVS-75LAT0 SWAP.
							      >	systemd[1]: Activating swap /dev/disk/by-uuid/16f5df4f-ce73-4
Console: switching to colour frame buffer device 160x50		Console: switching to colour frame buffer device 160x50
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device	radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier			radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on 	[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on 
							      >	Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 acr
							      >	systemd[1]: Activated swap /dev/disk/by-uuid/16f5df4f-ce73-4f
							      >	systemd[1]: Reached target Swap.
systemd[1]: Created slice system-systemd\x2dbacklight.slice.	systemd[1]: Created slice system-systemd\x2dbacklight.slice.
systemd[1]: Starting Load/Save Screen Backlight Brightness of	systemd[1]: Starting Load/Save Screen Backlight Brightness of
							      >	systemd[1]: Found device WDC_WD600BEVS-75LAT0 HOME.
							      >	systemd[1]: Starting File System Check on /dev/disk/by-uuid/8
systemd[1]: Started Load/Save Screen Backlight Brightness of 	systemd[1]: Started Load/Save Screen Backlight Brightness of 
systemd[1]: Started File System Check on /dev/disk/by-uuid/88	systemd[1]: Started File System Check on /dev/disk/by-uuid/88
systemd[1]: Mounting /home...					systemd[1]: Mounting /home...
EXT4-fs (sda3): mounted filesystem with ordered data mode. Op	EXT4-fs (sda3): mounted filesystem with ordered data mode. Op
systemd[1]: Mounted /home.					systemd[1]: Mounted /home.
systemd[1]: Reached target Local File Systems.			systemd[1]: Reached target Local File Systems.
systemd[1]: Started Load/Save RF Kill Switch Status.	      <
systemd[1]: Started Journal Service.				systemd[1]: Started Journal Service.
systemd-journald[165]: Received request to flush runtime jour |	systemd-journald[149]: Received request to flush runtime jour
nf_conntrack version 0.5.0 (16078 buckets, 64312 max)		nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team			ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered					Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been dep	bridge: automatic filtering via arp/ip/ip6tables has been dep
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready		IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready		IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready		IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
tg3 0000:08:00.0 enp8s0: Link is up at 1000 Mbps, full duplex	tg3 0000:08:00.0 enp8s0: Link is up at 1000 Mbps, full duplex
tg3 0000:08:00.0 enp8s0: Flow control is on for TX and on for	tg3 0000:08:00.0 enp8s0: Flow control is on for TX and on for
IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready	IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
fuse init (API version 7.23)					fuse init (API version 7.23)
perf interrupt took too long (2509 > 2495), lowering kernel.p <

https://bugs.archlinux.org/task/46902

Last edited by TheChickenMan (2015-12-31 09:15:48)


If quantum mechanics hasn't profoundly shocked you, you haven't understood it yet.
Niels Bohr

Offline

#2 2015-11-14 21:21:36

dakaujunk
Member
Registered: 2015-11-14
Posts: 1

Re: [SOLVED] linux4.2.4-1 No Video Output

TheChickenMan,

I've a Thinkpad T60 with the same problem. I've not yet tried your solution of downgrading yet.

But I found a temporary solution myself. Once the system boots up, enable DPMS by running the following command in the terminal. Only works for x86 platform (should work for both 686 - 32 bit and x86-64/amd64 - 64 bit).

sudo vbetool dpms on

Let me know if this helps. Meanwhile, I'll try your solution and see if that permanently fixes this issue. Thanks.

Offline

#3 2015-11-28 23:26:44

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

5 days ago I upgraded Arch on this laptop. (Last upgrade was done 2-4 months ago.)

Now laptop boots, but screen gets black right after the kernel boot messages.

I verified that this isn't an Xorg problem, because this happens even with Xorg disabled and Xorg.log untouched. System itself works, I can log  into it through the network.

What is wrong?

Last edited by FlyingJay (2015-11-28 23:29:47)

Offline

#4 2015-11-28 23:45:26

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 16,812

Re: [SOLVED] linux4.2.4-1 No Video Output

Are you using a display manager?  Which one?
Can you change to a different console with CTRL-ALT-F2 and login?
If you can ssh in, you can read the journal.  Anything interesting in the Journal?
What is your graphics chip set?  Is it a hybrid graphics system?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#5 2015-11-29 01:49:13

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

ewaller wrote:

Are you using a display manager?  Which one?

lightdm

ewaller wrote:

Can you change to a different console with CTRL-ALT-F2 and login?

No, screen remains black. It's like something during boot makes screen completely dysfunctional.

ewaller wrote:

If you can ssh in, you can read the journal.  Anything interesting in the Journal?

I couldn't find anything obviously wrong in system.journal

ewaller wrote:

What is your graphics chip set?  Is it a hybrid graphics system?

01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270]
This isn't a hybrid graphics system.

I updated again today, with forced update of all packages, and still a black screen.

Offline

#6 2015-11-29 01:57:52

byte
Member
From: Düsseldorf (DE)
Registered: 2006-05-01
Posts: 2,046

Re: [SOLVED] linux4.2.4-1 No Video Output


1000

Offline

#7 2015-11-29 02:07:12

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 16,812

Re: [SOLVED] linux4.2.4-1 No Video Output

Okay, let's try a different tack.  Any chance the back light is turning off?  SSH in and look around in /sys/class/backlight and see if you find the 'file' that controls the brightness and see what is in it.  Try writing a bigger number to that 'file'.   Either that, or grab a flashlight (torch) and illuminate your display at an angle in a low-light room.  Can you see anything on the display?  (BTW, this is just a WAG [wild arsed guess])

Edit:  Oh, byte may be on to something

Last edited by ewaller (2015-11-29 02:08:08)


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#8 2015-11-29 02:30:05

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

ewaller wrote:

Okay, let's try a different tack.  Any chance the back light is turning off?  SSH in and look around in /sys/class/backlight and see if you find the 'file' that controls the brightness and see what is in it.  Try writing a bigger number to that 'file'.   Either that, or grab a flashlight (torch) and illuminate your display at an angle in a low-light room.  Can you see anything on the display?  (BTW, this is just a WAG [wild arsed guess])

Yes, it is a backlight issue. Something turns it off.

# pwd
/sys/class/backlight/acpi_video0
# ls -l
total 0
-r--r--r-- 1 root root 4096 Nov 28 18:28 actual_brightness
-rw-r--r-- 1 root root 4096 Nov 28 18:28 bl_power
-rw-r--r-- 1 root root 4096 Nov 28 18:28 brightness
lrwxrwxrwx 1 root root    0 Nov 28 18:28 device -> ../../../0000:01:05.0
-r--r--r-- 1 root root 4096 Nov 28 18:28 max_brightness
drwxr-xr-x 2 root root    0 Nov 28 18:28 power
lrwxrwxrwx 1 root root    0 Nov 28 17:27 subsystem -> ../../../../../../class/backlight
-r--r--r-- 1 root root 4096 Nov 28 18:28 type
-rw-r--r-- 1 root root 4096 Nov 28 18:28 uevent

actual_brightness=7
bl_power=0
brightness=7
max_brightness=7
type=firmware

Offline

#9 2015-11-29 03:12:52

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

Writing 7 into bl_power doesn't help. They all are at max (7).

Last edited by FlyingJay (2015-11-29 03:40:35)

Offline

#10 2015-11-29 04:31:43

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 16,812

Re: [SOLVED] linux4.2.4-1 No Video Output

I don't know.   I'm out of altitude, airspeed and ideas all at the same time.  Sorry.


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#11 2015-11-29 09:47:09

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

'vbetool dpms on' lights the screen again.

I don't know how can I use this without sshing into it. Any idea who might be turning the backlight off? I guess the wide class of the video cards is affected by this bug.

Last edited by FlyingJay (2015-11-29 09:51:17)

Offline

#12 2015-11-29 17:22:58

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 16,812

Re: [SOLVED] linux4.2.4-1 No Video Output

Merging threads


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#13 2015-11-29 23:17:35

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

What is the easiest way to auto-execute this command after the kernel boots? Like as the last started service that starts?

Offline

#14 2015-11-30 00:09:48

TheChickenMan
Member
From: United States
Registered: 2015-07-25
Posts: 353

Re: [SOLVED] linux4.2.4-1 No Video Output

If you upgrade the kernel to 4.3-1 from [testing] it should fix the problem. I was waiting for the next kernel to make it out from there before marking this as solved.


If quantum mechanics hasn't profoundly shocked you, you haven't understood it yet.
Niels Bohr

Offline

#15 2015-11-30 09:04:46

FlyingJay
Member
Registered: 2015-04-06
Posts: 30

Re: [SOLVED] linux4.2.4-1 No Video Output

It works, thanks!

Offline

#16 2015-12-01 15:29:00

WFV
Member
From: right here right now ℶ
Registered: 2013-04-23
Posts: 247

Re: [SOLVED] linux4.2.4-1 No Video Output

removed (unrelated)

Last edited by WFV (2015-12-27 00:15:33)

Offline

Board footer

Powered by FluxBB