Black screen after sddm start (VirtualBox)

bade · 2015-11-08 21:51:14

Hi,

I've installed Arch Linux on VirtualBox. Afterwards, I installed vbox guest packages and ran VBoxClient-all without errors. Then, I followed this article: http://www.linuxveda.com/2015/02/27/how … rch-linux/ . I done everything up to this line:

systemctl start sddm

After executing that line, my window expanded a bit and went black. I can't see terminal, even after reboot. If I do "Ctrl-Alt-F1" I get my host-OS terminal (which is Mint) and with "host-F1" nothing happens. How can I get to Arch terminal and what steps should I follow to finally install DE (Plasma 5.4).

Thanks,
B

LCvanDinteren · 2015-11-09 14:00:50

Have you also tried host-f2 and others? It is possible that your sddm is (trying to) start in tty1.

If you get into terminal I would disable sddm untill the issue is solved

systemctl disable sddm

So that next time you boot, you just start in console again.

Next I would try to start Plasma manually using startx.

To test sddm you can use systemctl start sddm, you should only enable the service after you verified that it is working correctly.

bade · 2015-11-11 20:05:36

I managed to get to tty2 (Host + F2), but I still can't start X, that is - it starts and shuts down ("Server terminated successfully (0)").
Can someone please provide me with step-by-step instructions?
So far I have:
- sddm installed (if I enable it, I get black screen at boot)
- qt5 installed
- plasma and plasma-meta packages installed
- xorg (and xorg-utils) installed
- vbox guest packages installed and loaded (they are in lsmod output)
- at start of ~/.xinitrc is: "VBoxClient-all; exec startkde"

I'd be very grateful if someone help me, I lost few days on this already and I'm out of ideas.
Thanks!

LCvanDinteren · 2015-11-11 21:17:01

What have you tried so far? Besides startx command?
Do you have xorg-xinit package installed?
Can you post your /var/log/Xorg.0.log ?

bade · 2015-11-12 11:30:28

I have xorg-xinit installed. It seems I haven't had KDE packages installed. Now, when I do "startx", my screen goes full, I can see mouse pointer and after some time, I even get pop up box from Plasma saying "Invalid instruction (4)".
If I manually do "# startkde", I get "$DISPLAY is not set or cannot connect to the X server."
I put /usr/bin/rcvboxdrv to autostart at boot just to make sure everything is loaded. I still get black screen if I do "systemctl start sddm" and if I do "sddm-greeter", it gets aborted and core dumped.
I've seen somewhere package "plasma-next", but pacman says it can't find it (I presume it needs to be fetched from some other repo). Should I even install that package?

LCvanDinteren · 2015-11-12 11:59:56

Perhaps you should follow the Arch wiki: https://wiki.archlinux.org/index.php/KDE
It explains how to install and configure KDE.

In my experience, it is always better to follow the arch wiki than try some random post on a random site.

bade · 2015-11-12 12:32:11

I followed that wiki already. I've installed all packages that are listed in "Upgrading from Plasma 4 to 5" and in the next chapter, there is starting Plasma which says that all you have to do is to put "exec startkde" in ~/.xinitrc - which I did. What bothers me is that black screen when I enable SDDM... All error messages that I got when running any command (not just sddm) is about display... As if I don't have graphic driver installed.

LCvanDinteren · 2015-11-12 12:42:13

bade wrote:

As if I don't have graphic driver installed.

Do you?

Can you post your xorg.0.log and journal?

bade · 2015-11-12 19:45:32

I'm not sure where is exact location of journal logs. I looked in /var/log/journals but it seems like there's binary data.
Xorg.0.log doesn't show anything suspicious, although there's a lot of messages like:

config/udev: Adding input device PC Speaker...
No input driver specified, ignoring this device
This device may be added with another device file

LCvanDinteren · 2015-11-12 20:33:58

$ journalctl -h

Paste full xorg.0.log please, I don't think your PC Speakers are involved in this...;)

bade · 2015-11-12 21:47:20

I've finally managed to share folder with my host So, Xorg.0.log:

[  4521.035] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[  4521.040] X Protocol Version 11, Revision 0
[  4521.042] Build Operating System: Linux 4.2.5-1-ARCH i686 
[  4521.043] Current Operating System: Linux bade 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015 i686
[  4521.043] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c9f3c809-f8e9-40f6-9171-ee2e6e23725b rw quiet
[  4521.046] Build Date: 01 November 2015  10:39:16AM
[  4521.047]  
[  4521.047] Current version of pixman: 0.32.8
[  4521.051] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  4521.051] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4521.054] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 12 21:55:14 2015
[  4521.121] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4521.158] (==) No Layout section.  Using the first Screen section.
[  4521.158] (==) No screen section available. Using defaults.
[  4521.158] (**) |-->Screen "Default Screen Section" (0)
[  4521.158] (**) |   |-->Monitor "<default monitor>"
[  4521.175] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  4521.175] (==) Automatically adding devices
[  4521.175] (==) Automatically enabling devices
[  4521.176] (==) Automatically adding GPU devices
[  4521.237] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  4521.237] 	Entry deleted from font path.
[  4521.238] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  4521.238] 	Entry deleted from font path.
[  4521.239] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  4521.239] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  4521.240] 	Entry deleted from font path.
[  4521.240] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  4521.240] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[  4521.240] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4521.240] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4521.247] (II) Loader magic: 0x829e6c0
[  4521.247] (II) Module ABI versions:
[  4521.247] 	X.Org ANSI C Emulation: 0.4
[  4521.248] 	X.Org Video Driver: 19.0
[  4521.248] 	X.Org XInput driver : 21.1
[  4521.248] 	X.Org Server Extension : 9.0
[  4521.262] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  4521.263] (II) xfree86: Adding drm device (/dev/dri/card0)
[  4521.264] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  4521.271] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216
[  4521.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  4521.273] (II) LoadModule: "glx"
[  4521.280] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4521.452] (II) Module glx: vendor="X.Org Foundation"
[  4521.452] 	compiled for 1.17.4, module version = 1.0.0
[  4521.452] 	ABI class: X.Org Server Extension, version 9.0
[  4521.452] (==) AIGLX enabled
[  4521.452] (==) Matched vboxvideo as autoconfigured driver 0
[  4521.452] (==) Matched vboxvideo as autoconfigured driver 1
[  4521.453] (==) Matched modesetting as autoconfigured driver 2
[  4521.453] (==) Matched fbdev as autoconfigured driver 3
[  4521.453] (==) Matched vesa as autoconfigured driver 4
[  4521.453] (==) Assigned the driver to the xf86ConfigLayout
[  4521.453] (II) LoadModule: "vboxvideo"
[  4521.482] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[  4521.500] (II) Module vboxvideo: vendor="Oracle Corporation"
[  4521.500] 	compiled for 1.17.2, module version = 1.0.1
[  4521.501] 	Module class: X.Org Video Driver
[  4521.501] 	ABI class: X.Org Video Driver, version 19.0
[  4521.501] (**) Load address of symbol "VBOXVIDEO" is 0xb6d37220
[  4521.501] (II) LoadModule: "modesetting"
[  4521.502] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  4521.510] (II) Module modesetting: vendor="X.Org Foundation"
[  4521.510] 	compiled for 1.17.4, module version = 1.17.4
[  4521.510] 	Module class: X.Org Video Driver
[  4521.510] 	ABI class: X.Org Video Driver, version 19.0
[  4521.510] (II) LoadModule: "fbdev"
[  4521.511] (WW) Warning, couldn't open module fbdev
[  4521.511] (II) UnloadModule: "fbdev"
[  4521.511] (II) Unloading fbdev
[  4521.511] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  4521.511] (II) LoadModule: "vesa"
[  4521.511] (WW) Warning, couldn't open module vesa
[  4521.512] (II) UnloadModule: "vesa"
[  4521.512] (II) Unloading vesa
[  4521.512] (EE) Failed to load module "vesa" (module does not exist, 0)
[  4521.512] (II) VBoxVideo: guest driver for VirtualBox: vbox
[  4521.512] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  4521.512] (++) using VT number 1

[  4521.512] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  4521.513] (WW) Falling back to old probe method for modesetting
[  4521.514] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.0.8_OSEr103449
[  4521.514] (II) Loading sub module "ramdac"
[  4521.514] (II) LoadModule: "ramdac"
[  4521.514] (II) Module "ramdac" already built-in
[  4521.514] (II) Loading sub module "fb"
[  4521.514] (II) LoadModule: "fb"
[  4521.515] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4521.533] (II) Module fb: vendor="X.Org Foundation"
[  4521.533] 	compiled for 1.17.4, module version = 1.0.0
[  4521.533] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4521.533] (II) Loading sub module "shadowfb"
[  4521.533] (II) LoadModule: "shadowfb"
[  4521.533] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  4521.547] (II) Module shadowfb: vendor="X.Org Foundation"
[  4521.547] 	compiled for 1.17.4, module version = 1.0.0
[  4521.547] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4521.547] (II) Loading sub module "vgahw"
[  4521.547] (II) LoadModule: "vgahw"
[  4521.547] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  4521.555] (II) Module vgahw: vendor="X.Org Foundation"
[  4521.555] 	compiled for 1.17.4, module version = 0.1.0
[  4521.555] 	ABI class: X.Org Video Driver, version 19.0
[  4521.555] (II) Loading sub module "dri2"
[  4521.555] (II) LoadModule: "dri2"
[  4521.555] (II) Module "dri2" already built-in
[  4521.555] (II) VBoxVideo(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  4521.555] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[  4521.555] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
[  4521.555] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[  4521.555] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  4521.555] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[  4521.555] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  4521.556] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  4521.556] (==) VBoxVideo(0): RGB weight 888
[  4521.556] (==) VBoxVideo(0): Default visual is TrueColor
[  4521.556] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[  4521.556] (==) VBoxVideo(0): DPI set to (96, 96)
[  4521.556] (II) UnloadModule: "modesetting"
[  4521.556] (II) Unloading modesetting
[  4521.556] (--) Depth 24 pixmap format is 32 bpp
[  4521.640] (II) VBoxVideo(0): Requested monitor count: 1
[  4521.650] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[  4521.651] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[  4521.651] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[  4521.651] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz Pb)
[  4521.651] (II) VBoxVideo(0): Modeline "2560x1600"x60.0  247.26  2560 2562 2564 2566  1600 1602 1604 1606 (96.4 kHz b)
[  4521.651] (II) VBoxVideo(0): Modeline "2560x1440"x60.0  222.63  2560 2562 2564 2566  1440 1442 1444 1446 (86.8 kHz b)
[  4521.652] (II) VBoxVideo(0): Modeline "2048x1536"x60.0  190.04  2048 2050 2052 2054  1536 1538 1540 1542 (92.5 kHz b)
[  4521.652] (II) VBoxVideo(0): Modeline "1920x1600"x60.0  185.59  1920 1922 1924 1926  1600 1602 1604 1606 (96.4 kHz b)
[  4521.652] (II) VBoxVideo(0): Modeline "1920x1080"x60.0  125.50  1920 1922 1924 1926  1080 1082 1084 1086 (65.2 kHz b)
[  4521.652] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "1680x1050"x60.0  106.82  1680 1682 1684 1686  1050 1052 1054 1056 (63.4 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "1400x1050"x60.0   89.08  1400 1402 1404 1406  1050 1052 1054 1056 (63.4 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "1280x1024"x60.0   79.47  1280 1282 1284 1286  1024 1026 1028 1030 (61.8 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  4521.653] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[  4521.653] (II) VBoxVideo(0): Output VGA-0 connected
[  4521.654] (II) VBoxVideo(0): Using exact sizes for initial modes
[  4521.654] (II) VBoxVideo(0): Output VGA-0 using initial mode 800x600
[  4521.654] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4521.654] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4521.672] (==) VBoxVideo(0): DPMS enabled
[  4521.673] (--) RandR disabled
[  4521.689] (II) AIGLX: Screen 0 is not DRI2 capable
[  4521.689] (EE) AIGLX: reverting to software rendering
[  4522.893] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4522.894] (II) AIGLX: Loaded and initialized swrast
[  4522.894] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  4522.894] (II) VBoxVideo(0): Setting screen physical size to 211 x 158
[  4523.335] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  4523.335] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4523.335] (II) LoadModule: "evdev"
[  4523.335] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4523.355] (II) Module evdev: vendor="X.Org Foundation"
[  4523.355] 	compiled for 1.17.4, module version = 2.10.0
[  4523.355] 	Module class: X.Org XInput Driver
[  4523.355] 	ABI class: X.Org XInput driver, version 21.1
[  4523.357] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[  4523.357] (II) Using input driver 'evdev' for 'Power Button'
[  4523.357] (**) Power Button: always reports core events
[  4523.357] (**) evdev: Power Button: Device: "/dev/input/event3"
[  4523.358] (--) evdev: Power Button: Vendor 0 Product 0x1
[  4523.358] (--) evdev: Power Button: Found keys
[  4523.358] (II) evdev: Power Button: Configuring as keyboard
[  4523.358] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[  4523.358] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4523.358] (**) Option "xkb_rules" "evdev"
[  4523.360] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[  4523.360] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  4523.361] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 16 paused 0
[  4523.361] (II) Using input driver 'evdev' for 'Sleep Button'
[  4523.361] (**) Sleep Button: always reports core events
[  4523.361] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[  4523.361] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  4523.362] (--) evdev: Sleep Button: Found keys
[  4523.362] (II) evdev: Sleep Button: Configuring as keyboard
[  4523.362] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event4"
[  4523.362] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[  4523.362] (**) Option "xkb_rules" "evdev"
[  4523.363] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  4523.363] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  4523.365] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 17 paused 0
[  4523.365] (II) Using input driver 'evdev' for 'Video Bus'
[  4523.365] (**) Video Bus: always reports core events
[  4523.365] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  4523.365] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  4523.365] (--) evdev: Video Bus: Found keys
[  4523.365] (II) evdev: Video Bus: Configuring as keyboard
[  4523.365] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6/event5"
[  4523.365] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  4523.365] (**) Option "xkb_rules" "evdev"
[  4523.367] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event2)
[  4523.367] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[  4523.369] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 18 paused 0
[  4523.369] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[  4523.369] (**) VirtualBox mouse integration: always reports core events
[  4523.369] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event2"
[  4523.369] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[  4523.369] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[  4523.370] (--) evdev: VirtualBox mouse integration: Found absolute axes
[  4523.370] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[  4523.370] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[  4523.370] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[  4523.370] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[  4523.370] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4523.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input3/event2"
[  4523.370] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 9)
[  4523.370] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[  4523.370] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[  4523.370] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[  4523.370] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[  4523.370] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[  4523.371] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[  4523.371] (II) No input driver specified, ignoring this device.
[  4523.371] (II) This device may have been added with another device file.
[  4523.372] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[  4523.372] (II) No input driver specified, ignoring this device.
[  4523.372] (II) This device may have been added with another device file.
[  4523.373] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[  4523.373] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[  4523.430] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[  4523.430] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[  4523.430] (**) VirtualBox USB Tablet: always reports core events
[  4523.430] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event1"
[  4523.430] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[  4523.430] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[  4523.430] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[  4523.430] (--) evdev: VirtualBox USB Tablet: Found relative axes
[  4523.430] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[  4523.430] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[  4523.431] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[  4523.431] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[  4523.431] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[  4523.431] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[  4523.431] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4523.431] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2/event1"
[  4523.431] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 10)
[  4523.431] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[  4523.431] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[  4523.431] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[  4523.431] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[  4523.431] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[  4523.431] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[  4523.433] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[  4523.433] (II) No input driver specified, ignoring this device.
[  4523.433] (II) This device may have been added with another device file.
[  4523.434] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[  4523.434] (II) No input driver specified, ignoring this device.
[  4523.434] (II) This device may have been added with another device file.
[  4523.435] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  4523.435] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4523.437] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  4523.437] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  4523.437] (**) AT Translated Set 2 keyboard: always reports core events
[  4523.437] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  4523.437] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  4523.437] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  4523.437] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  4523.437] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  4523.437] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  4523.437] (**) Option "xkb_rules" "evdev"
[  4523.439] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[  4523.439] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[  4523.441] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 21 paused 0
[  4523.441] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[  4523.441] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[  4523.441] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event7"
[  4523.441] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[  4523.441] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[  4523.441] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[  4523.441] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[  4523.441] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[  4523.441] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[  4523.441] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[  4523.441] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[  4523.441] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4523.441] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[  4523.441] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[  4523.441] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[  4523.442] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[  4523.442] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[  4523.442] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[  4523.442] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[  4523.443] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[  4523.443] (II) No input driver specified, ignoring this device.
[  4523.443] (II) This device may have been added with another device file.
[  4523.444] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  4523.444] (II) No input driver specified, ignoring this device.
[  4523.444] (II) This device may have been added with another device file.

And journalctl --system:

Nov 12 22:37:37 bade systemd[351]: Started D-Bus User Message Bus.
Nov 12 22:37:40 bade kernel: hrtimer: interrupt took 5709638 ns
Nov 12 22:37:41 bade kdeinit5[625]: Qt: Session management error: networkIdsList argument is NULL
Nov 12 22:37:41 bade kdeinit5[625]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Nov 12 22:37:42 bade kdeinit5[627]: Qt: Session management error: networkIdsList argument is NULL
Nov 12 22:37:43 bade kdeinit5[627]: kf5.kded: found kded module "statusnotifierwatcher" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:43 bade kdeinit5[630]: Initializing  "kcm_access" :  "kcminit_access"
Nov 12 22:37:43 bade kdeinit5[627]: kf5.kded: found kded module "powerdevil" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:44 bade kdeinit5[627]: kf5.kded: found kded module "printmanager" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:44 bade kdeinit5[627]: kf5.kded: found kded module "kscreen" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:44 bade kdeinit5[630]: Initializing  "kcm_style" :  "kcminit_style"
Nov 12 22:37:44 bade kdeinit5[627]: kf5.kded: found kded module "networkmanagement" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:45 bade kaccess[632]: QCoreApplication::arguments: Please instantiate the QApplication object first
Nov 12 22:37:45 bade kaccess[633]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Nov 12 22:37:45 bade kdeinit5[627]: kf5.kded: found kded module "accounts" by prepending 'kded_' to the library path, please fix your metadata.
Nov 12 22:37:46 bade systemd-coredump[624]: Process 603 (ksplashqml) of user 0 dumped core.
Nov 12 22:38:28 bade systemd-journald[115]: Runtime journal (/run/log/journal/) is currently using 4.6M.
Nov 12 22:38:29 bade systemd-journald[115]: System journal (/var/log/journal/) is currently using 104.0M.
Nov 12 22:38:29 bade systemd-journald[115]: Time spent on flushing to /var is 37.232ms for 2 entries.
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys cpuset
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys cpu
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys cpuacct
Nov 12 22:38:29 bade kernel: Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015
Nov 12 22:38:29 bade kernel: x86/fpu: Legacy x87 FPU detected.
Nov 12 22:38:29 bade kernel: x86/fpu: Using 'lazy' FPU context switches.
Nov 12 22:38:29 bade kernel: e820: BIOS-provided physical RAM map:
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x0000000000100000-0x000000002ffeffff] usable
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x000000002fff0000-0x000000002fffffff] ACPI data
Nov 12 22:38:29 bade kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
Nov 12 22:38:29 bade kernel: Notice: NX (Execute Disable) protection missing in CPU!
Nov 12 22:38:29 bade kernel: SMBIOS 2.5 present.
Nov 12 22:38:29 bade kernel: DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Nov 12 22:38:29 bade kernel: Hypervisor detected: KVM
Nov 12 22:38:29 bade kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 12 22:38:29 bade kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 12 22:38:29 bade kernel: e820: last_pfn = 0x2fff0 max_arch_pfn = 0x100000
Nov 12 22:38:29 bade kernel: MTRR default type: uncachable
Nov 12 22:38:29 bade kernel: MTRR variable ranges disabled:
Nov 12 22:38:29 bade kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Nov 12 22:38:29 bade kernel: MTRR: Disabled
Nov 12 22:38:29 bade kernel: CPU MTRRs all blank - virtualized system.
Nov 12 22:38:29 bade kernel: Scanning 1 areas for low memory corruption
Nov 12 22:38:29 bade kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
Nov 12 22:38:29 bade kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Nov 12 22:38:29 bade kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 12 22:38:29 bade kernel:  [mem 0x00000000-0x000fffff] page 4k
Nov 12 22:38:29 bade kernel: init_memory_mapping: [mem 0x2f800000-0x2fbfffff]
Nov 12 22:38:29 bade kernel:  [mem 0x2f800000-0x2fbfffff] page 4M
Nov 12 22:38:29 bade kernel: init_memory_mapping: [mem 0x00100000-0x2f7fffff]
Nov 12 22:38:29 bade kernel:  [mem 0x00100000-0x003fffff] page 4k
Nov 12 22:38:29 bade kernel:  [mem 0x00400000-0x2f7fffff] page 4M
Nov 12 22:38:29 bade kernel: init_memory_mapping: [mem 0x2fc00000-0x2ffeffff]
Nov 12 22:38:29 bade kernel:  [mem 0x2fc00000-0x2ffeffff] page 4k
Nov 12 22:38:29 bade kernel: BRK [0x0181d000, 0x0181dfff] PGTABLE
Nov 12 22:38:29 bade kernel: RAMDISK: [mem 0x2f331000-0x2f6d1fff]
Nov 12 22:38:29 bade kernel: ACPI: Early table checksum verification disabled
Nov 12 22:38:29 bade kernel: ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
Nov 12 22:38:29 bade kernel: ACPI: XSDT 0x000000002FFF0030 000034 (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
Nov 12 22:38:29 bade kernel: ACPI: FACP 0x000000002FFF00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
Nov 12 22:38:29 bade kernel: ACPI: DSDT 0x000000002FFF0410 001BF1 (v01 VBOX   VBOXBIOS 00000002 INTL 20140214)
Nov 12 22:38:29 bade kernel: ACPI: FACS 0x000000002FFF0200 000040
Nov 12 22:38:29 bade kernel: ACPI: FACS 0x000000002FFF0200 000040
Nov 12 22:38:29 bade kernel: ACPI: SSDT 0x000000002FFF0240 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20140214)
Nov 12 22:38:29 bade kernel: 0MB HIGHMEM available.
Nov 12 22:38:29 bade kernel: 767MB LOWMEM available.
Nov 12 22:38:29 bade kernel:   mapped low ram: 0 - 2fff0000
Nov 12 22:38:29 bade kernel:   low ram: 0 - 2fff0000
Nov 12 22:38:29 bade kernel: kvm-clock: Using msrs 4b564d01 and 4b564d00
Nov 12 22:38:29 bade kernel: kvm-clock: cpu 0, msr 0:2ffef001, primary cpu clock
Nov 12 22:38:29 bade kernel: clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Nov 12 22:38:29 bade kernel: BRK [0x0181e000, 0x0181efff] PGTABLE
Nov 12 22:38:29 bade kernel: Zone ranges:
Nov 12 22:38:29 bade kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Nov 12 22:38:29 bade kernel:   Normal   [mem 0x0000000001000000-0x000000002ffeffff]
Nov 12 22:38:29 bade kernel:   HighMem  empty
Nov 12 22:38:29 bade kernel: Movable zone start for each node
Nov 12 22:38:29 bade kernel: Early memory node ranges
Nov 12 22:38:29 bade kernel:   node   0: [mem 0x0000000000001000-0x000000000009efff]
Nov 12 22:38:29 bade kernel:   node   0: [mem 0x0000000000100000-0x000000002ffeffff]
Nov 12 22:38:29 bade kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000002ffeffff]
Nov 12 22:38:29 bade kernel: On node 0 totalpages: 196494
Nov 12 22:38:29 bade kernel: free_area_init_node: node 0, pgdat c1693380, node_mem_map ef86f028
Nov 12 22:38:29 bade kernel:   DMA zone: 40 pages used for memmap
Nov 12 22:38:29 bade kernel:   DMA zone: 0 pages reserved
Nov 12 22:38:29 bade kernel:   DMA zone: 3998 pages, LIFO batch:0
Nov 12 22:38:29 bade kernel:   Normal zone: 1880 pages used for memmap
Nov 12 22:38:29 bade kernel:   Normal zone: 192496 pages, LIFO batch:31
Nov 12 22:38:29 bade kernel: Using APIC driver default
Nov 12 22:38:29 bade kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 12 22:38:29 bade kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Nov 12 22:38:29 bade kernel: Found and enabled local APIC!
Nov 12 22:38:29 bade kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Nov 12 22:38:29 bade kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 12 22:38:29 bade kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Nov 12 22:38:29 bade kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Nov 12 22:38:29 bade kernel: e820: [mem 0x30000000-0xfffbffff] available for PCI devices
Nov 12 22:38:29 bade kernel: Booting paravirtualized kernel on KVM
Nov 12 22:38:29 bade kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
Nov 12 22:38:29 bade kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Nov 12 22:38:29 bade kernel: PERCPU: Embedded 17 pages/cpu @ef858000 s39756 r0 d29876 u69632
Nov 12 22:38:29 bade kernel: pcpu-alloc: s39756 r0 d29876 u69632 alloc=17*4096
Nov 12 22:38:29 bade kernel: pcpu-alloc: [0] 0 
Nov 12 22:38:29 bade kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194574
Nov 12 22:38:29 bade kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c9f3c809-f8e9-40f6-9171-ee2e6e23725b rw quiet
Nov 12 22:38:29 bade kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Nov 12 22:38:29 bade kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 12 22:38:29 bade kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 12 22:38:29 bade kernel: Initializing CPU#0
Nov 12 22:38:29 bade kernel: Initializing HighMem for node 0 (00000000:00000000)
Nov 12 22:38:29 bade kernel: Memory: 765296K/785976K available (4927K kernel code, 505K rwdata, 1376K rodata, 600K init, 832K bss, 20680K reserved, 0K cma-reserved, 0K highmem)
Nov 12 22:38:29 bade kernel: virtual kernel memory layout:
Nov 12 22:38:29 bade kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 12 22:38:29 bade kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Nov 12 22:38:29 bade kernel: Preemptible hierarchical RCU implementation.
Nov 12 22:38:29 bade kernel:         Build-time adjustment of leaf fanout to 32.
Nov 12 22:38:29 bade kernel:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
Nov 12 22:38:29 bade kernel: RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
Nov 12 22:38:29 bade kernel: NR_IRQS:2304 nr_irqs:32 16
Nov 12 22:38:29 bade kernel: CPU 0 irqstacks, hard=eec30000 soft=eec32000
Nov 12 22:38:29 bade kernel: Console: colour dummy device 80x25
Nov 12 22:38:29 bade kernel: console [tty0] enabled
Nov 12 22:38:29 bade kernel: tsc: Detected 2194.918 MHz processor
Nov 12 22:38:29 bade kernel: Calibrating delay loop (skipped) preset value.. 4391.74 BogoMIPS (lpj=7316393)
Nov 12 22:38:29 bade kernel: pid_max: default: 32768 minimum: 301
Nov 12 22:38:29 bade kernel: ACPI: Core revision 20150619
Nov 12 22:38:29 bade kernel: ACPI: All ACPI Tables successfully acquired
Nov 12 22:38:29 bade kernel: ACPI: setting ELCR to 0200 (from 0e00)
Nov 12 22:38:29 bade kernel: Security Framework initialized
Nov 12 22:38:29 bade kernel: Yama: becoming mindful.
Nov 12 22:38:29 bade kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Nov 12 22:38:29 bade kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys blkio
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys memory
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys devices
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys freezer
Nov 12 22:38:29 bade kernel: Initializing cgroup subsys net_cls
Nov 12 22:38:29 bade kernel: CPU: Physical Processor ID: 0
Nov 12 22:38:29 bade kernel: mce: CPU supports 0 MCE banks
Nov 12 22:38:29 bade kernel: process: using mwait in idle threads
Nov 12 22:38:29 bade kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Nov 12 22:38:29 bade kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Nov 12 22:38:29 bade kernel: Freeing SMP alternatives memory: 20K (c1740000 - c1745000)
Nov 12 22:38:29 bade kernel: ftrace: allocating 20816 entries in 41 pages
Nov 12 22:38:29 bade kernel: smpboot: weird, boot CPU (#0) not listed by the BIOS
Nov 12 22:38:29 bade kernel: smpboot: SMP motherboard not detected
Nov 12 22:38:29 bade kernel: smpboot: SMP disabled
Nov 12 22:38:29 bade kernel: Enabling APIC mode:  Flat.  Using 0 I/O APICs
Nov 12 22:38:29 bade kernel: Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
Nov 12 22:38:29 bade kernel: x86: Booted up 1 node, 1 CPUs
Nov 12 22:38:29 bade kernel: smpboot: Total of 1 processors activated (4391.74 BogoMIPS)
Nov 12 22:38:29 bade kernel: devtmpfs: initialized
Nov 12 22:38:29 bade kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
Nov 12 22:38:29 bade kernel: pinctrl core: initialized pinctrl subsystem
Nov 12 22:38:29 bade kernel: RTC time: 21:38:12, date: 11/12/15
Nov 12 22:38:29 bade kernel: NET: Registered protocol family 16
Nov 12 22:38:29 bade kernel: cpuidle: using governor ladder
Nov 12 22:38:29 bade kernel: cpuidle: using governor menu
Nov 12 22:38:29 bade kernel: ACPI: bus type PCI registered
Nov 12 22:38:29 bade kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 12 22:38:29 bade kernel: PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
Nov 12 22:38:29 bade kernel: PCI: Using configuration type 1 for base access
Nov 12 22:38:29 bade kernel: ACPI: Added _OSI(Module Device)
Nov 12 22:38:29 bade kernel: ACPI: Added _OSI(Processor Device)
Nov 12 22:38:29 bade kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 12 22:38:29 bade kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 12 22:38:29 bade kernel: ACPI: Executed 1 blocks of module-level executable AML code
Nov 12 22:38:29 bade kernel: ACPI: Interpreter enabled
Nov 12 22:38:29 bade kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
Nov 12 22:38:29 bade kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
Nov 12 22:38:29 bade kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
Nov 12 22:38:29 bade kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
Nov 12 22:38:29 bade kernel: ACPI: (supports S0 S5)
Nov 12 22:38:29 bade kernel: ACPI: Using PIC for interrupt routing
Nov 12 22:38:29 bade kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Nov 12 22:38:29 bade kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: host bridge window [mem 0x30000000-0xffdfffff window] (ignored)
Nov 12 22:38:29 bade kernel: PCI: root bus 00: using default resources
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Nov 12 22:38:29 bade kernel: PCI host bridge to bus 0000:00
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
Nov 12 22:38:29 bade kernel: pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
Nov 12 22:38:29 bade kernel: pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Nov 12 22:38:29 bade kernel: pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
Nov 12 22:38:29 bade kernel: pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
Nov 12 22:38:29 bade kernel: pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
Nov 12 22:38:29 bade kernel: pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
Nov 12 22:38:29 bade kernel: pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
Nov 12 22:38:29 bade kernel: pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
Nov 12 22:38:29 bade kernel: pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
Nov 12 22:38:29 bade kernel: pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
Nov 12 22:38:29 bade kernel: pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
Nov 12 22:38:29 bade kernel: pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
Nov 12 22:38:29 bade kernel: pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
Nov 12 22:38:29 bade kernel: pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
Nov 12 22:38:29 bade kernel: pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
Nov 12 22:38:29 bade kernel: pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
Nov 12 22:38:29 bade kernel: pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
Nov 12 22:38:29 bade kernel: pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
Nov 12 22:38:29 bade kernel: pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
Nov 12 22:38:29 bade kernel: pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
Nov 12 22:38:29 bade kernel: pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
Nov 12 22:38:29 bade kernel: pci 0000:00:0d.0: reg 0x10: [io  0xd240-0xd247]
Nov 12 22:38:29 bade kernel: pci 0000:00:0d.0: reg 0x18: [io  0xd250-0xd257]
Nov 12 22:38:29 bade kernel: pci 0000:00:0d.0: reg 0x20: [io  0xd260-0xd26f]
Nov 12 22:38:29 bade kernel: pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: on NUMA node 0
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Nov 12 22:38:29 bade kernel: ACPI: Enabled 2 GPEs in block 00 to 07
Nov 12 22:38:29 bade kernel: vgaarb: setting as boot device: PCI:0000:00:02.0
Nov 12 22:38:29 bade kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Nov 12 22:38:29 bade kernel: vgaarb: loaded
Nov 12 22:38:29 bade kernel: vgaarb: bridge control possible 0000:00:02.0
Nov 12 22:38:29 bade kernel: PCI: Using ACPI for IRQ routing
Nov 12 22:38:29 bade kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 12 22:38:29 bade kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Nov 12 22:38:29 bade kernel: e820: reserve RAM buffer [mem 0x2fff0000-0x2fffffff]
Nov 12 22:38:29 bade kernel: NetLabel: Initializing
Nov 12 22:38:29 bade kernel: NetLabel:  domain hash size = 128
Nov 12 22:38:29 bade kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Nov 12 22:38:29 bade kernel: NetLabel:  unlabeled traffic allowed by default
Nov 12 22:38:29 bade kernel: clocksource: Switched to clocksource kvm-clock
Nov 12 22:38:29 bade kernel: pnp: PnP ACPI init
Nov 12 22:38:29 bade kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
Nov 12 22:38:29 bade kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
Nov 12 22:38:29 bade kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
Nov 12 22:38:29 bade kernel: pnp: PnP ACPI: found 3 devices
Nov 12 22:38:29 bade kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
Nov 12 22:38:29 bade kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
Nov 12 22:38:29 bade kernel: NET: Registered protocol family 2
Nov 12 22:38:29 bade kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Nov 12 22:38:29 bade kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Nov 12 22:38:29 bade kernel: TCP: Hash tables configured (established 8192 bind 8192)
Nov 12 22:38:29 bade kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Nov 12 22:38:29 bade kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Nov 12 22:38:29 bade kernel: NET: Registered protocol family 1
Nov 12 22:38:29 bade kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Nov 12 22:38:29 bade kernel: pci 0000:00:01.0: Activating ISA DMA hang workarounds
Nov 12 22:38:29 bade kernel: pci 0000:00:02.0: Video device with shadowed ROM
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Nov 12 22:38:29 bade kernel: PCI: setting IRQ 11 as level-triggered
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Nov 12 22:38:29 bade kernel: PCI: setting IRQ 10 as level-triggered
Nov 12 22:38:29 bade kernel: PCI: CLS 0 bytes, default 64
Nov 12 22:38:29 bade kernel: Unpacking initramfs...
Nov 12 22:38:29 bade kernel: Freeing initrd memory: 3716K (ef331000 - ef6d2000)
Nov 12 22:38:29 bade kernel: platform rtc_cmos: registered platform RTC device (no PNP device found)
Nov 12 22:38:29 bade kernel: RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer
Nov 12 22:38:29 bade kernel: hw unit of domain pp0-core 2^-0 Joules
Nov 12 22:38:29 bade kernel: hw unit of domain package 2^-0 Joules
Nov 12 22:38:29 bade kernel: hw unit of domain dram 2^-0 Joules
Nov 12 22:38:29 bade kernel: hw unit of domain pp1-gpu 2^-0 Joules
Nov 12 22:38:29 bade kernel: microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
Nov 12 22:38:29 bade kernel: microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Nov 12 22:38:29 bade kernel: apm: BIOS not found.
Nov 12 22:38:29 bade kernel: Scanning for low memory corruption every 60 seconds
Nov 12 22:38:29 bade kernel: futex hash table entries: 256 (order: 2, 16384 bytes)
Nov 12 22:38:29 bade kernel: Initialise system trusted keyring
Nov 12 22:38:29 bade kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Nov 12 22:38:29 bade kernel: zpool: loaded
Nov 12 22:38:29 bade kernel: zbud: loaded
Nov 12 22:38:29 bade kernel: VFS: Disk quotas dquot_6.6.0
Nov 12 22:38:29 bade kernel: VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 12 22:38:29 bade kernel: Key type big_key registered
Nov 12 22:38:29 bade kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 12 22:38:29 bade kernel: io scheduler noop registered
Nov 12 22:38:29 bade kernel: io scheduler deadline registered
Nov 12 22:38:29 bade kernel: io scheduler cfq registered (default)
Nov 12 22:38:29 bade kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 12 22:38:29 bade kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 12 22:38:29 bade kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
Nov 12 22:38:29 bade kernel: vesafb: scrolling: redraw
Nov 12 22:38:29 bade kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 12 22:38:29 bade kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf0800000, using 1216k, total 1216k
Nov 12 22:38:29 bade kernel: Console: switching to colour frame buffer device 80x30
Nov 12 22:38:29 bade kernel: fb0: VESA VGA frame buffer device
Nov 12 22:38:29 bade kernel: GHES: HEST is not enabled!
Nov 12 22:38:29 bade kernel: isapnp: Scanning for PnP cards...
Nov 12 22:38:29 bade kernel: isapnp: No Plug & Play device found
Nov 12 22:38:29 bade kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 12 22:38:29 bade kernel: rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Nov 12 22:38:29 bade kernel: rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
Nov 12 22:38:29 bade kernel: ledtrig-cpu: registered to indicate activity on CPUs
Nov 12 22:38:29 bade kernel: NET: Registered protocol family 10
Nov 12 22:38:29 bade kernel: NET: Registered protocol family 17
Nov 12 22:38:29 bade kernel: Using IPI No-Shortcut mode
Nov 12 22:38:29 bade kernel: Loading compiled-in X.509 certificates
Nov 12 22:38:29 bade kernel: registered taskstats version 1
Nov 12 22:38:29 bade kernel: zswap: loading zswap
Nov 12 22:38:29 bade kernel: zswap: using zbud pool
Nov 12 22:38:29 bade kernel: zswap: using lzo compressor
Nov 12 22:38:29 bade kernel:   Magic number: 7:741:651
Nov 12 22:38:29 bade kernel: acpi PNP0A03:00: hash matches
Nov 12 22:38:29 bade kernel: rtc_cmos rtc_cmos: setting system clock to 2015-11-12 21:38:13 UTC (1447364293)
Nov 12 22:38:29 bade kernel: PM: Hibernation image not present or could not be loaded.
Nov 12 22:38:29 bade kernel: Freeing unused kernel memory: 600K (c16aa000 - c1740000)
Nov 12 22:38:29 bade kernel: Write protecting the kernel text: 4932k
Nov 12 22:38:29 bade kernel: Write protecting the kernel read-only data: 1380k
Nov 12 22:38:29 bade kernel: random: systemd-tmpfile urandom read with 11 bits of entropy available
Nov 12 22:38:29 bade kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov 12 22:38:29 bade kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 12 22:38:29 bade kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 12 22:38:29 bade kernel: tsc: Refined TSC clocksource calibration: 2194.918 MHz
Nov 12 22:38:29 bade kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
Nov 12 22:38:29 bade kernel: SCSI subsystem initialized
Nov 12 22:38:29 bade kernel: libata version 3.00 loaded.
Nov 12 22:38:29 bade kernel: ata_piix 0000:00:01.1: version 2.13
Nov 12 22:38:29 bade kernel: scsi host0: ata_piix
Nov 12 22:38:29 bade kernel: scsi host1: ata_piix
Nov 12 22:38:29 bade kernel: ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
Nov 12 22:38:29 bade kernel: ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Nov 12 22:38:29 bade kernel: ACPI: bus type USB registered
Nov 12 22:38:29 bade kernel: usbcore: registered new interface driver usbfs
Nov 12 22:38:29 bade kernel: usbcore: registered new interface driver hub
Nov 12 22:38:29 bade kernel: usbcore: registered new device driver usb
Nov 12 22:38:29 bade kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 12 22:38:29 bade kernel: ehci-pci: EHCI PCI platform driver
Nov 12 22:38:29 bade kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 12 22:38:29 bade kernel: ohci-pci: OHCI PCI platform driver
Nov 12 22:38:29 bade kernel: ehci-pci 0000:00:0b.0: EHCI Host Controller
Nov 12 22:38:29 bade kernel: ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
Nov 12 22:38:29 bade kernel: ehci-pci 0000:00:0b.0: irq 10, io mem 0xf0805000
Nov 12 22:38:29 bade kernel: ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
Nov 12 22:38:29 bade kernel: hub 1-0:1.0: USB hub found
Nov 12 22:38:29 bade kernel: hub 1-0:1.0: 12 ports detected
Nov 12 22:38:29 bade kernel: ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
Nov 12 22:38:29 bade kernel: ata2.00: configured for UDMA/33
Nov 12 22:38:29 bade kernel: ohci-pci 0000:00:06.0: OHCI PCI host controller
Nov 12 22:38:29 bade kernel: ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
Nov 12 22:38:29 bade kernel: ohci-pci 0000:00:06.0: irq 11, io mem 0xf0804000
Nov 12 22:38:29 bade kernel: scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
Nov 12 22:38:29 bade kernel: hub 2-0:1.0: USB hub found
Nov 12 22:38:29 bade kernel: hub 2-0:1.0: 12 ports detected
Nov 12 22:38:29 bade kernel: ahci 0000:00:0d.0: version 3.0
Nov 12 22:38:29 bade kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 12 22:38:29 bade kernel: ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
Nov 12 22:38:29 bade kernel: ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Nov 12 22:38:29 bade kernel: ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
Nov 12 22:38:29 bade kernel: scsi host2: ahci
Nov 12 22:38:29 bade kernel: ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
Nov 12 22:38:29 bade kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 12 22:38:29 bade kernel: ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Nov 12 22:38:29 bade kernel: ata3.00: 41943040 sectors, multi 128: LBA48 NCQ (depth 31/32)
Nov 12 22:38:29 bade kernel: ata3.00: configured for UDMA/133
Nov 12 22:38:29 bade kernel: scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
Nov 12 22:38:29 bade kernel: usb 2-1: new full-speed USB device number 2 using ohci-pci
Nov 12 22:38:29 bade kernel: floppy0: no floppy controllers found
Nov 12 22:38:29 bade kernel: work still pending
Nov 12 22:38:29 bade kernel: floppy0: floppy_shutdown: timeout handler died.  
Nov 12 22:38:29 bade kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Nov 12 22:38:29 bade kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
Nov 12 22:38:29 bade kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 12 22:38:29 bade kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Nov 12 22:38:29 bade kernel: sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
Nov 12 22:38:29 bade kernel: sd 2:0:0:0: [sda] Write Protect is off
Nov 12 22:38:29 bade kernel: sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 12 22:38:29 bade kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 12 22:38:29 bade kernel: hidraw: raw HID events driver (C) Jiri Kosina
Nov 12 22:38:29 bade kernel:  sda: sda1 sda2 sda3 sda4
Nov 12 22:38:29 bade kernel: usbcore: registered new interface driver usbhid
Nov 12 22:38:29 bade kernel: usbhid: USB HID core driver
Nov 12 22:38:29 bade kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Nov 12 22:38:29 bade kernel: input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input2
Nov 12 22:38:29 bade kernel: hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
Nov 12 22:38:29 bade kernel: random: nonblocking pool is initialized
Nov 12 22:38:29 bade kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 12 22:38:29 bade kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 12 22:38:29 bade systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
Nov 12 22:38:29 bade systemd[1]: Detected virtualization oracle.
Nov 12 22:38:29 bade systemd[1]: Detected architecture x86.
Nov 12 22:38:29 bade systemd[1]: Set hostname to <bade>.
Nov 12 22:38:29 bade systemd[1]: Configuration file /etc/systemd/system/vbox_script.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Nov 12 22:38:29 bade systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
Nov 12 22:38:29 bade systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Nov 12 22:38:29 bade systemd[1]: Reached target Encrypted Volumes.
Nov 12 22:38:29 bade systemd[1]: Created slice System Slice.
Nov 12 22:38:29 bade systemd[1]: Created slice system-dhcpcd.slice.
Nov 12 22:38:29 bade systemd[1]: Created slice system-systemd\x2dfsck.slice.
Nov 12 22:38:29 bade systemd[1]: Created slice system-getty.slice.
Nov 12 22:38:29 bade systemd[1]: Reached target Remote File Systems.
Nov 12 22:38:29 bade systemd[1]: Listening on udev Kernel Socket.
Nov 12 22:38:29 bade systemd[1]: Listening on Journal Socket (/dev/log).
Nov 12 22:38:29 bade systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 12 22:38:29 bade systemd[1]: Listening on udev Control Socket.
Nov 12 22:38:29 bade systemd[1]: Listening on LVM2 metadata daemon socket.
Nov 12 22:38:29 bade systemd[1]: Listening on Device-mapper event daemon FIFOs.
Nov 12 22:38:29 bade systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Nov 12 22:38:29 bade systemd[1]: Listening on Journal Socket.
Nov 12 22:38:29 bade systemd[1]: Mounting POSIX Message Queue File System...
Nov 12 22:38:29 bade systemd[1]: Starting Journal Service...
Nov 12 22:38:29 bade systemd[1]: Mounting Debug File System...
Nov 12 22:38:29 bade systemd[1]: Starting Create list of required static device nodes for the current kernel...
Nov 12 22:38:29 bade systemd[1]: Mounting Configuration File System...
Nov 12 22:38:29 bade systemd[1]: Mounting Huge Pages File System...
Nov 12 22:38:29 bade systemd[1]: Starting Apply Kernel Variables...
Nov 12 22:38:29 bade systemd[1]: Starting Remount Root and Kernel File Systems...
Nov 12 22:38:29 bade systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 12 22:38:29 bade systemd[1]: Reached target Paths.
Nov 12 22:38:29 bade systemd[1]: Starting Setup Virtual Console...
Nov 12 22:38:29 bade systemd[1]: Created slice User and Session Slice.
Nov 12 22:38:29 bade systemd[1]: Reached target Slices.
Nov 12 22:38:29 bade systemd[1]: Mounting Temporary Directory...
Nov 12 22:38:29 bade systemd[1]: Started Create list of required static device nodes for the current kernel.
Nov 12 22:38:29 bade kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
Nov 12 22:38:29 bade systemd[1]: Mounted Configuration File System.
Nov 12 22:38:29 bade systemd[1]: Mounted POSIX Message Queue File System.
Nov 12 22:38:29 bade systemd[1]: Mounted Debug File System.
Nov 12 22:38:29 bade systemd[1]: Mounted Huge Pages File System.
Nov 12 22:38:29 bade systemd[1]: Mounted Temporary Directory.
Nov 12 22:38:29 bade systemd[1]: Started Remount Root and Kernel File Systems.
Nov 12 22:38:29 bade systemd[1]: Started Apply Kernel Variables.
Nov 12 22:38:29 bade systemd[1]: Starting Load/Save Random Seed...
Nov 12 22:38:29 bade systemd[1]: Starting Create Static Device Nodes in /dev...
Nov 12 22:38:29 bade systemd[1]: Starting udev Coldplug all Devices...
Nov 12 22:38:29 bade systemd[1]: Started Load/Save Random Seed.
Nov 12 22:38:29 bade systemd[1]: Started Setup Virtual Console.
Nov 12 22:38:29 bade systemd[1]: Started udev Coldplug all Devices.
Nov 12 22:38:29 bade systemd[1]: Started Create Static Device Nodes in /dev.
Nov 12 22:38:29 bade systemd[1]: Reached target Local File Systems (Pre).
Nov 12 22:38:29 bade systemd[1]: Starting udev Kernel Device Manager...
Nov 12 22:38:29 bade systemd-journald[115]: Journal started
Nov 12 22:38:29 bade systemd[1]: Started Journal Service.
Nov 12 22:38:29 bade systemd[1]: Starting Flush Journal to Persistent Storage...
Nov 12 22:38:30 bade systemd[1]: Started udev Kernel Device Manager.
Nov 12 22:38:30 bade systemd[1]: Started Flush Journal to Persistent Storage.
Nov 12 22:38:30 bade kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Nov 12 22:38:30 bade kernel: ACPI: Power Button [PWRF]
Nov 12 22:38:30 bade kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
Nov 12 22:38:30 bade kernel: ACPI: Sleep Button [SLPF]
Nov 12 22:38:30 bade kernel: ACPI: AC Adapter [AC] (on-line)
Nov 12 22:38:30 bade kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Nov 12 22:38:30 bade kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
Nov 12 22:38:30 bade kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Nov 12 22:38:30 bade kernel: PCI: setting IRQ 9 as level-triggered
Nov 12 22:38:30 bade kernel: VbgdCommonInitDevExt: Setting up heartbeat to trigger every 2000 milliseconds
Nov 12 22:38:30 bade kernel: input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
Nov 12 22:38:30 bade kernel: vboxguest: misc device minor 58, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
Nov 12 22:38:30 bade kernel: vboxguest: Successfully loaded version 5.0.8_OSE (interface 0x00010004)
Nov 12 22:38:30 bade kernel: Linux agpgart interface v0.103
Nov 12 22:38:30 bade kernel: ACPI: Battery Slot [BAT0] (battery present)
Nov 12 22:38:31 bade kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Nov 12 22:38:31 bade kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Nov 12 22:38:31 bade kernel: parport_pc 00:02: reported by Plug and Play ACPI
Nov 12 22:38:31 bade kernel: [drm] Initialized drm 1.1.0 20060810
Nov 12 22:38:31 bade kernel: [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
Nov 12 22:38:31 bade mtp-probe[176]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1"
Nov 12 22:38:31 bade mtp-probe[176]: bus: 2, device: 2 was not an MTP device
Nov 12 22:38:31 bade systemd[1]: Found device VBOX_HARDDISK 1.
Nov 12 22:38:31 bade systemd[1]: Starting File System Check on /dev/disk/by-uuid/f3beee27-a6d3-4259-a29f-7cb2d99c909f...
Nov 12 22:38:31 bade systemd[1]: Found device VBOX_HARDDISK 3.
Nov 12 22:38:31 bade systemd[1]: Activating swap /dev/disk/by-uuid/6717e4d1-dcdc-4ca3-9ef4-23598728aa30...
Nov 12 22:38:31 bade kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
Nov 12 22:38:31 bade systemd[1]: Found device VBOX_HARDDISK 4.
Nov 12 22:38:31 bade systemd[1]: Starting File System Check on /dev/disk/by-uuid/4ec51e04-4154-4ebc-8ea3-8d617911e4b8...
Nov 12 22:38:31 bade kernel: Adding 2097148k swap on /dev/sda3.  Priority:-1 extents:1 across:2097148k FS
Nov 12 22:38:31 bade systemd[1]: Activated swap /dev/disk/by-uuid/6717e4d1-dcdc-4ca3-9ef4-23598728aa30.
Nov 12 22:38:31 bade systemd[1]: Reached target Swap.
Nov 12 22:38:32 bade kernel: psmouse serio1: hgpk: ID: 10 00 64
Nov 12 22:38:32 bade kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input8
Nov 12 22:38:32 bade kernel: intel_rapl: no valid rapl domains found in package 0
Nov 12 22:38:32 bade systemd-fsck[177]: /dev/sda1: recovering journal
Nov 12 22:38:32 bade systemd-fsck[177]: /dev/sda1: clean, 358/25376 files, 44983/101376 blocks
Nov 12 22:38:32 bade systemd[1]: Started File System Check on /dev/disk/by-uuid/f3beee27-a6d3-4259-a29f-7cb2d99c909f.
Nov 12 22:38:32 bade systemd[1]: Mounting /boot...
Nov 12 22:38:32 bade systemd-fsck[183]: /dev/sda4: recovering journal
Nov 12 22:38:32 bade kernel: ppdev: user-space parallel port driver
Nov 12 22:38:32 bade kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
Nov 12 22:38:32 bade systemd[1]: Mounted /boot.
Nov 12 22:38:32 bade kernel: e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:ee:b1:4f
Nov 12 22:38:32 bade kernel: e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
Nov 12 22:38:32 bade systemd-fsck[183]: /dev/sda4: clean, 14/524288 files, 70400/2097152 blocks
Nov 12 22:38:32 bade systemd[1]: Started File System Check on /dev/disk/by-uuid/4ec51e04-4154-4ebc-8ea3-8d617911e4b8.
Nov 12 22:38:32 bade kernel: piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Nov 12 22:38:32 bade systemd[1]: Mounting /home...
Nov 12 22:38:32 bade kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
Nov 12 22:38:32 bade systemd[1]: Mounted /home.
Nov 12 22:38:32 bade systemd[1]: Reached target Local File Systems.
Nov 12 22:38:32 bade systemd[1]: Starting Create Volatile Files and Directories...
Nov 12 22:38:32 bade kernel: snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
Nov 12 22:38:32 bade systemd[1]: Started Create Volatile Files and Directories.
Nov 12 22:38:32 bade systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Nov 12 22:38:32 bade systemd[1]: Started Update UTMP about System Boot/Shutdown.
Nov 12 22:38:32 bade systemd[1]: Reached target System Initialization.
Nov 12 22:38:32 bade systemd[1]: Started Daily rotation of log files.
Nov 12 22:38:32 bade systemd[1]: Started Daily Cleanup of Temporary Directories.
Nov 12 22:38:32 bade systemd[1]: Listening on D-Bus System Message Bus Socket.
Nov 12 22:38:32 bade systemd[1]: Reached target Sockets.
Nov 12 22:38:32 bade systemd[1]: Started Daily man-db cache update.
Nov 12 22:38:32 bade systemd[1]: Started Daily verification of password and group files.
Nov 12 22:38:32 bade systemd[1]: Reached target Timers.
Nov 12 22:38:32 bade systemd[1]: Reached target Basic System.
Nov 12 22:38:32 bade systemd[1]: Starting VirtualBox Guest Service...
Nov 12 22:38:32 bade systemd[1]: Started VBox skripta.
Nov 12 22:38:33 bade systemd[1]: Started D-Bus System Message Bus.
Nov 12 22:38:33 bade kernel: mousedev: PS/2 mouse device common for all mice
Nov 12 22:38:33 bade kernel: e1000 0000:00:03.0 enp0s3: renamed from eth0
Nov 12 22:38:33 bade kernel: snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
Nov 12 22:38:33 bade rcvboxdrv[229]: Unloading modules:
Nov 12 22:38:33 bade rcvboxdrv[229]: DKMS autoinstall
Nov 12 22:38:34 bade kernel: floppy0: no floppy controllers found
Nov 12 22:38:34 bade kernel: work still pending
Nov 12 22:38:34 bade kernel: vboxdrv: Found 1 processor cores
Nov 12 22:38:34 bade kernel: vboxdrv: TSC mode is Invariant, tentative frequency 2201079944 Hz
Nov 12 22:38:34 bade kernel: vboxdrv: Successfully loaded version 5.0.8_OSE (interface 0x00240000)
Nov 12 22:38:34 bade systemd[1]: Starting Permit User Sessions...
Nov 12 22:38:34 bade systemd[1]: Starting Login Service...
Nov 12 22:38:34 bade kernel: VBoxNetAdp: Successfully started.
Nov 12 22:38:34 bade systemd[1]: Started Permit User Sessions.
Nov 12 22:38:34 bade systemd[1]: Found device 82540EM Gigabit Ethernet Controller (PRO/1000 MT Desktop Adapter).
Nov 12 22:38:34 bade kernel: VBoxNetFlt: Successfully started.
Nov 12 22:38:34 bade kernel: VBoxPciLinuxInit
Nov 12 22:38:34 bade kernel: vboxsf: Successfully loaded version 5.0.8_OSE (interface 0x00010004)
Nov 12 22:38:34 bade systemd[1]: Started VirtualBox Guest Service.
Nov 12 22:38:34 bade kernel: vboxpci: IOMMU not found (not registered)
Nov 12 22:38:34 bade rcvboxdrv[229]: Loading modules: vboxnetadp vboxnetflt vboxpci vboxdrv
Nov 12 22:38:34 bade kernel: VBoxService 5.0.8_OSE r103449 (verbosity: 0) linux.x86 (Oct 23 2015 17:29:59) release log
Nov 12 22:38:34 bade VBoxService[285]: VBoxService 5.0.8_OSE r103449 (verbosity: 0) linux.x86 (Oct 23 2015 17:29:59) release log
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.000782 main     Log opened 2015-11-12T21:38:34.831111000Z
Nov 12 22:38:34 bade kernel: 00:00:00.018622 main     OS Product: Linux
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.018622 main     OS Product: Linux
Nov 12 22:38:34 bade kernel: 00:00:00.020982 main     OS Release: 4.2.5-1-ARCH
Nov 12 22:38:34 bade kernel: 00:00:00.021215 main     OS Version: #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015
Nov 12 22:38:34 bade kernel: 00:00:00.021333 main     OS Service Pack: #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015
Nov 12 22:38:34 bade kernel: 00:00:00.021425 main     Executable: /usr/bin/VBoxService
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.020982 main     OS Release: 4.2.5-1-ARCH
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.021215 main     OS Version: #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.021333 main     OS Service Pack: #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.021425 main     Executable: /usr/bin/VBoxService
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.021428 main     Process ID: 285
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.021442 main     Package type: LINUX_32BITS_GENERIC (OSE)
Nov 12 22:38:34 bade kernel: 00:00:00.035598 main     5.0.8_OSE r103449 started. Verbose level = 0
Nov 12 22:38:34 bade VBoxService[285]: 00:00:00.035598 main     5.0.8_OSE r103449 started. Verbose level = 0
Nov 12 22:38:34 bade systemd-logind[268]: New seat seat0.
Nov 12 22:38:34 bade systemd[1]: Started Login Service.
Nov 12 22:38:34 bade systemd[1]: Reached target Sound Card.
Nov 12 22:38:34 bade systemd-logind[268]: Watching system buttons on /dev/input/event2 (Power Button)
Nov 12 22:38:34 bade systemd[1]: Starting dhcpcd on enp0s3...
Nov 12 22:38:34 bade systemd-logind[268]: Watching system buttons on /dev/input/event3 (Sleep Button)
Nov 12 22:38:34 bade systemd-logind[268]: Watching system buttons on /dev/input/event4 (Video Bus)
Nov 12 22:38:34 bade systemd[1]: Started Getty on tty1.
Nov 12 22:38:34 bade systemd[1]: Reached target Login Prompts.
Nov 12 22:38:35 bade systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: adding address fe80::8bce:7fca:9a7d:c5ec
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: waiting for carrier
Nov 12 22:38:35 bade kernel: e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Nov 12 22:38:35 bade kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
Nov 12 22:38:35 bade kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: carrier acquired
Nov 12 22:38:35 bade dhcpcd[299]: DUID 00:01:00:01:1d:d1:e6:17:08:00:27:ee:b1:4f
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: IAID 27:ee:b1:4f
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: rebinding lease of 10.0.2.15
Nov 12 22:38:35 bade dhcpcd[299]: enp0s3: probing static address 10.0.2.15/24
Nov 12 22:38:36 bade dhcpcd[299]: enp0s3: soliciting an IPv6 router
Nov 12 22:38:40 bade dhcpcd[299]: enp0s3: leased 10.0.2.15 for 86400 seconds
Nov 12 22:38:40 bade dhcpcd[299]: enp0s3: adding route to 10.0.2.0/24
Nov 12 22:38:40 bade dhcpcd[299]: enp0s3: adding default route via 10.0.2.2
Nov 12 22:38:41 bade dhcpcd[299]: forked to background, child pid 359
Nov 12 22:38:41 bade systemd[1]: Started dhcpcd on enp0s3.
Nov 12 22:38:41 bade systemd[1]: Reached target Network.
Nov 12 22:38:41 bade systemd[1]: Reached target Multi-User System.
Nov 12 22:38:41 bade systemd[1]: Reached target Graphical Interface.
Nov 12 22:38:41 bade systemd[1]: Startup finished in 15.267s (kernel) + 15.451s (userspace) = 30.719s.
Nov 12 22:38:48 bade dhcpcd[359]: enp0s3: no IPv6 Routers available
Nov 12 22:39:57 bade login[305]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Nov 12 22:39:57 bade systemd[1]: Created slice user-0.slice.
Nov 12 22:39:57 bade systemd-logind[268]: New session c1 of user root.
Nov 12 22:39:57 bade systemd[1]: Started Session c1 of user root.
Nov 12 22:39:57 bade systemd[1]: Starting User Manager for UID 0...
Nov 12 22:39:57 bade systemd[370]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Nov 12 22:39:57 bade systemd[370]: Starting D-Bus User Message Bus Socket.
Nov 12 22:39:57 bade systemd[370]: Listening on Sound System.
Nov 12 22:39:57 bade systemd[370]: Reached target Timers.
Nov 12 22:39:57 bade systemd[370]: Reached target Paths.
Nov 12 22:39:57 bade systemd[370]: Listening on D-Bus User Message Bus Socket.
Nov 12 22:39:57 bade systemd[370]: Reached target Sockets.
Nov 12 22:39:57 bade systemd[370]: Reached target Basic System.
Nov 12 22:39:57 bade systemd[370]: Reached target Default.
Nov 12 22:39:57 bade systemd[370]: Startup finished in 241ms.
Nov 12 22:39:57 bade systemd[1]: Started User Manager for UID 0.
Nov 12 22:39:57 bade login[305]: ROOT LOGIN ON tty1

LCvanDinteren · 2015-11-13 07:24:13

Seems to me that your video drivers are not loading.
Afaik vesa and fbdev have something to do with display, both are failing to load.

Have you installed your video drivers?

Try to supply as much info as possible, you've talked about error messages about display, could you supply those?

As for always: try to give as many details as possible, show commands you try, output it gives, packages you installed, etc etc

bade · 2015-11-13 18:41:58

I really can't recall anything else that I've tried - that is, I tried million things and can't remember what else was about X. Anyway, I installed xf86-video-vesa, xf86-video-fbdev and xf86-video-intel so there is no "couldn't open module vesa" in log. Here's log after installing of packages:

[  3038.706] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[  3038.708] X Protocol Version 11, Revision 0
[  3038.709] Build Operating System: Linux 4.2.5-1-ARCH i686 
[  3038.710] Current Operating System: Linux bade 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:28:41 CET 2015 i686
[  3038.710] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c9f3c809-f8e9-40f6-9171-ee2e6e23725b rw quiet
[  3038.712] Build Date: 01 November 2015  10:39:16AM
[  3038.713]  
[  3038.714] Current version of pixman: 0.32.8
[  3038.715] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  3038.715] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3038.718] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 13 18:27:25 2015
[  3038.719] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  3038.720] (==) No Layout section.  Using the first Screen section.
[  3038.720] (==) No screen section available. Using defaults.
[  3038.720] (**) |-->Screen "Default Screen Section" (0)
[  3038.720] (**) |   |-->Monitor "<default monitor>"
[  3038.720] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  3038.720] (==) Automatically adding devices
[  3038.720] (==) Automatically enabling devices
[  3038.720] (==) Automatically adding GPU devices
[  3038.720] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  3038.720] 	Entry deleted from font path.
[  3038.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  3038.721] 	Entry deleted from font path.
[  3038.721] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  3038.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  3038.721] 	Entry deleted from font path.
[  3038.721] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  3038.721] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[  3038.721] (==) ModulePath set to "/usr/lib/xorg/modules"
[  3038.721] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  3038.721] (II) Loader magic: 0x829e6c0
[  3038.721] (II) Module ABI versions:
[  3038.721] 	X.Org ANSI C Emulation: 0.4
[  3038.721] 	X.Org Video Driver: 19.0
[  3038.721] 	X.Org XInput driver : 21.1
[  3038.721] 	X.Org Server Extension : 9.0
[  3038.738] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  3038.741] (II) xfree86: Adding drm device (/dev/dri/card0)
[  3038.742] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  3038.749] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216
[  3038.749] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  3038.750] (II) LoadModule: "glx"
[  3038.750] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  3038.757] (II) Module glx: vendor="X.Org Foundation"
[  3038.757] 	compiled for 1.17.4, module version = 1.0.0
[  3038.757] 	ABI class: X.Org Server Extension, version 9.0
[  3038.757] (==) AIGLX enabled
[  3038.757] (==) Matched vboxvideo as autoconfigured driver 0
[  3038.757] (==) Matched vboxvideo as autoconfigured driver 1
[  3038.758] (==) Matched modesetting as autoconfigured driver 2
[  3038.758] (==) Matched fbdev as autoconfigured driver 3
[  3038.758] (==) Matched vesa as autoconfigured driver 4
[  3038.758] (==) Assigned the driver to the xf86ConfigLayout
[  3038.758] (II) LoadModule: "vboxvideo"
[  3038.759] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[  3038.759] (II) Module vboxvideo: vendor="Oracle Corporation"
[  3038.760] 	compiled for 1.17.2, module version = 1.0.1
[  3038.760] 	Module class: X.Org Video Driver
[  3038.760] 	ABI class: X.Org Video Driver, version 19.0
[  3038.760] (**) Load address of symbol "VBOXVIDEO" is 0xb6d23220
[  3038.760] (II) LoadModule: "modesetting"
[  3038.761] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  3038.761] (II) Module modesetting: vendor="X.Org Foundation"
[  3038.761] 	compiled for 1.17.4, module version = 1.17.4
[  3038.761] 	Module class: X.Org Video Driver
[  3038.761] 	ABI class: X.Org Video Driver, version 19.0
[  3038.761] (II) LoadModule: "fbdev"
[  3038.762] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  3038.763] (II) Module fbdev: vendor="X.Org Foundation"
[  3038.763] 	compiled for 1.17.0, module version = 0.4.4
[  3038.763] 	Module class: X.Org Video Driver
[  3038.763] 	ABI class: X.Org Video Driver, version 19.0
[  3038.763] (II) LoadModule: "vesa"
[  3038.764] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  3038.764] (II) Module vesa: vendor="X.Org Foundation"
[  3038.764] 	compiled for 1.17.2, module version = 2.3.4
[  3038.765] 	Module class: X.Org Video Driver
[  3038.765] 	ABI class: X.Org Video Driver, version 19.0
[  3038.765] (II) VBoxVideo: guest driver for VirtualBox: vbox
[  3038.765] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  3038.765] (II) FBDEV: driver for framebuffer: fbdev
[  3038.765] (II) VESA: driver for VESA chipsets: vesa
[  3038.765] (++) using VT number 1

[  3038.765] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  3038.771] (WW) Falling back to old probe method for modesetting
[  3038.771] (WW) Falling back to old probe method for fbdev
[  3038.771] (II) Loading sub module "fbdevhw"
[  3038.771] (II) LoadModule: "fbdevhw"
[  3038.772] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  3038.773] (II) Module fbdevhw: vendor="X.Org Foundation"
[  3038.773] 	compiled for 1.17.4, module version = 0.0.2
[  3038.773] 	ABI class: X.Org Video Driver, version 19.0
[  3038.773] (WW) Falling back to old probe method for vesa
[  3038.774] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.0.8_OSEr103449
[  3038.774] (II) Loading sub module "ramdac"
[  3038.774] (II) LoadModule: "ramdac"
[  3038.774] (II) Module "ramdac" already built-in
[  3038.774] (II) Loading sub module "fb"
[  3038.774] (II) LoadModule: "fb"
[  3038.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[  3038.775] (II) Module fb: vendor="X.Org Foundation"
[  3038.775] 	compiled for 1.17.4, module version = 1.0.0
[  3038.775] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3038.775] (II) Loading sub module "shadowfb"
[  3038.775] (II) LoadModule: "shadowfb"
[  3038.776] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  3038.777] (II) Module shadowfb: vendor="X.Org Foundation"
[  3038.777] 	compiled for 1.17.4, module version = 1.0.0
[  3038.777] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3038.777] (II) Loading sub module "vgahw"
[  3038.777] (II) LoadModule: "vgahw"
[  3038.778] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  3038.778] (II) Module vgahw: vendor="X.Org Foundation"
[  3038.778] 	compiled for 1.17.4, module version = 0.1.0
[  3038.779] 	ABI class: X.Org Video Driver, version 19.0
[  3038.779] (II) Loading sub module "dri2"
[  3038.779] (II) LoadModule: "dri2"
[  3038.779] (II) Module "dri2" already built-in
[  3038.779] (II) VBoxVideo(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  3038.779] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[  3038.779] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
[  3038.779] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[  3038.779] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  3038.779] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[  3038.779] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  3038.780] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  3038.780] (==) VBoxVideo(0): RGB weight 888
[  3038.780] (==) VBoxVideo(0): Default visual is TrueColor
[  3038.780] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[  3038.780] (==) VBoxVideo(0): DPI set to (96, 96)
[  3038.780] (II) UnloadModule: "modesetting"
[  3038.780] (II) Unloading modesetting
[  3038.780] (II) UnloadModule: "fbdev"
[  3038.780] (II) Unloading fbdev
[  3038.781] (II) UnloadSubModule: "fbdevhw"
[  3038.781] (II) Unloading fbdevhw
[  3038.781] (II) UnloadModule: "vesa"
[  3038.781] (II) Unloading vesa
[  3038.781] (--) Depth 24 pixmap format is 32 bpp
[  3038.921] (II) VBoxVideo(0): Requested monitor count: 1
[  3038.921] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[  3038.921] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[  3038.922] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[  3038.933] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz Pb)
[  3038.934] (II) VBoxVideo(0): Modeline "2560x1600"x60.0  247.26  2560 2562 2564 2566  1600 1602 1604 1606 (96.4 kHz b)
[  3038.934] (II) VBoxVideo(0): Modeline "2560x1440"x60.0  222.63  2560 2562 2564 2566  1440 1442 1444 1446 (86.8 kHz b)
[  3038.934] (II) VBoxVideo(0): Modeline "2048x1536"x60.0  190.04  2048 2050 2052 2054  1536 1538 1540 1542 (92.5 kHz b)
[  3038.934] (II) VBoxVideo(0): Modeline "1920x1600"x60.0  185.59  1920 1922 1924 1926  1600 1602 1604 1606 (96.4 kHz b)
[  3038.934] (II) VBoxVideo(0): Modeline "1920x1080"x60.0  125.50  1920 1922 1924 1926  1080 1082 1084 1086 (65.2 kHz b)
[  3038.934] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "1680x1050"x60.0  106.82  1680 1682 1684 1686  1050 1052 1054 1056 (63.4 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "1400x1050"x60.0   89.08  1400 1402 1404 1406  1050 1052 1054 1056 (63.4 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "1280x1024"x60.0   79.47  1280 1282 1284 1286  1024 1026 1028 1030 (61.8 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[  3038.935] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[  3038.935] (II) VBoxVideo(0): Output VGA-0 connected
[  3038.935] (II) VBoxVideo(0): Using exact sizes for initial modes
[  3038.935] (II) VBoxVideo(0): Output VGA-0 using initial mode 800x600
[  3038.935] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  3038.935] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  3038.936] (==) VBoxVideo(0): DPMS enabled
[  3038.936] (--) RandR disabled
[  3038.944] (II) AIGLX: Screen 0 is not DRI2 capable
[  3038.944] (EE) AIGLX: reverting to software rendering
[  3038.985] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  3038.985] (II) AIGLX: Loaded and initialized swrast
[  3038.985] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  3038.986] (II) VBoxVideo(0): Setting screen physical size to 211 x 158
[  3039.125] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  3039.125] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  3039.126] (II) LoadModule: "evdev"
[  3039.127] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  3039.128] (II) Module evdev: vendor="X.Org Foundation"
[  3039.128] 	compiled for 1.17.4, module version = 2.10.0
[  3039.128] 	Module class: X.Org XInput Driver
[  3039.128] 	ABI class: X.Org XInput driver, version 21.1
[  3039.131] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[  3039.131] (II) Using input driver 'evdev' for 'Power Button'
[  3039.131] (**) Power Button: always reports core events
[  3039.131] (**) evdev: Power Button: Device: "/dev/input/event2"
[  3039.131] (--) evdev: Power Button: Vendor 0 Product 0x1
[  3039.131] (--) evdev: Power Button: Found keys
[  3039.132] (II) evdev: Power Button: Configuring as keyboard
[  3039.132] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[  3039.132] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  3039.132] (**) Option "xkb_rules" "evdev"
[  3039.135] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[  3039.135] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  3039.137] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 16 paused 0
[  3039.137] (II) Using input driver 'evdev' for 'Sleep Button'
[  3039.137] (**) Sleep Button: always reports core events
[  3039.137] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[  3039.138] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  3039.138] (--) evdev: Sleep Button: Found keys
[  3039.138] (II) evdev: Sleep Button: Configuring as keyboard
[  3039.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event3"
[  3039.138] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[  3039.138] (**) Option "xkb_rules" "evdev"
[  3039.141] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  3039.141] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  3039.143] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 17 paused 0
[  3039.144] (II) Using input driver 'evdev' for 'Video Bus'
[  3039.144] (**) Video Bus: always reports core events
[  3039.144] (**) evdev: Video Bus: Device: "/dev/input/event4"
[  3039.144] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  3039.144] (--) evdev: Video Bus: Found keys
[  3039.144] (II) evdev: Video Bus: Configuring as keyboard
[  3039.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5/event4"
[  3039.144] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  3039.144] (**) Option "xkb_rules" "evdev"
[  3039.148] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[  3039.148] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[  3039.150] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 18 paused 0
[  3039.150] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[  3039.150] (**) VirtualBox mouse integration: always reports core events
[  3039.150] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[  3039.151] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[  3039.151] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[  3039.151] (--) evdev: VirtualBox mouse integration: Found absolute axes
[  3039.151] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[  3039.151] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[  3039.151] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[  3039.151] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[  3039.151] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  3039.151] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input6/event5"
[  3039.151] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 9)
[  3039.151] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[  3039.152] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[  3039.152] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[  3039.152] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[  3039.152] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[  3039.154] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[  3039.154] (II) No input driver specified, ignoring this device.
[  3039.155] (II) This device may have been added with another device file.
[  3039.156] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[  3039.157] (II) No input driver specified, ignoring this device.
[  3039.157] (II) This device may have been added with another device file.
[  3039.160] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[  3039.160] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[  3039.218] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[  3039.219] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[  3039.219] (**) VirtualBox USB Tablet: always reports core events
[  3039.220] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event1"
[  3039.221] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[  3039.222] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[  3039.222] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[  3039.222] (--) evdev: VirtualBox USB Tablet: Found relative axes
[  3039.222] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[  3039.223] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[  3039.223] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[  3039.223] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[  3039.223] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[  3039.223] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[  3039.223] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  3039.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0003/input/input10/event1"
[  3039.224] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 10)
[  3039.224] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[  3039.224] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[  3039.224] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[  3039.224] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[  3039.225] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[  3039.225] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[  3039.228] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[  3039.228] (II) No input driver specified, ignoring this device.
[  3039.228] (II) This device may have been added with another device file.
[  3039.231] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[  3039.231] (II) No input driver specified, ignoring this device.
[  3039.231] (II) This device may have been added with another device file.
[  3039.233] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  3039.234] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  3039.235] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  3039.235] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  3039.236] (**) AT Translated Set 2 keyboard: always reports core events
[  3039.236] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  3039.236] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  3039.237] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  3039.237] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  3039.237] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  3039.237] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  3039.237] (**) Option "xkb_rules" "evdev"
[  3039.240] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[  3039.241] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[  3039.242] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 21 paused 0
[  3039.243] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[  3039.243] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[  3039.243] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event7"
[  3039.243] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[  3039.243] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[  3039.244] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[  3039.244] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[  3039.244] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[  3039.244] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[  3039.244] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[  3039.244] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[  3039.244] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  3039.244] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[  3039.244] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[  3039.244] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[  3039.245] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[  3039.245] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[  3039.245] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[  3039.245] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[  3039.248] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[  3039.248] (II) No input driver specified, ignoring this device.
[  3039.248] (II) This device may have been added with another device file.
[  3039.250] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  3039.250] (II) No input driver specified, ignoring this device.
[  3039.250] (II) This device may have been added with another device file.
[  3108.620] (II) systemd-logind: got pause for 13:66
[  3108.621] (II) systemd-logind: got pause for 13:68
[  3108.621] (II) systemd-logind: got pause for 13:67
[  3108.621] (II) systemd-logind: got pause for 13:71
[  3108.621] (II) systemd-logind: got pause for 13:69
[  3108.621] (II) systemd-logind: got pause for 13:65
[  3108.621] (II) systemd-logind: got pause for 13:64
[  3108.621] (II) systemd-logind: got pause for 226:0
[  3111.263] (II) evdev: ImExPS/2 Generic Explorer Mouse: Close
[  3111.263] (II) UnloadModule: "evdev"
[  3111.264] (II) systemd-logind: releasing fd for 13:71
[  3111.284] (II) evdev: AT Translated Set 2 keyboard: Close
[  3111.284] (II) UnloadModule: "evdev"
[  3111.284] (II) systemd-logind: releasing fd for 13:64
[  3111.301] (II) evdev: VirtualBox USB Tablet: Close
[  3111.301] (II) UnloadModule: "evdev"
[  3111.301] (II) systemd-logind: releasing fd for 13:65
[  3111.317] (II) evdev: VirtualBox mouse integration: Close
[  3111.317] (II) UnloadModule: "evdev"
[  3111.317] (II) systemd-logind: releasing fd for 13:69
[  3111.339] (II) evdev: Video Bus: Close
[  3111.339] (II) UnloadModule: "evdev"
[  3111.339] (II) systemd-logind: releasing fd for 13:68
[  3111.350] (II) evdev: Sleep Button: Close
[  3111.351] (II) UnloadModule: "evdev"
[  3111.351] (II) systemd-logind: releasing fd for 13:67
[  3111.357] (II) evdev: Power Button: Close
[  3111.357] (II) UnloadModule: "evdev"
[  3111.357] (II) systemd-logind: releasing fd for 13:66
[  3111.830] (II) Server terminated successfully (0). Closing log file.

I still get black screen when I enable SDDM, and /var/log/sddm.log doesn't show anything.
If You have any suggestions on what commands to try and check, please tell me.

P.S.: Thanks for helping me

LCvanDinteren · 2015-11-13 19:27:10

No problem at all. I'm afraid I have to disappoint you though.. I have no idea how to proceed either..:(

Caldazar · 2015-11-13 23:43:34

I get this a lot with sddm to the point that I expect it at every update. It's alpha quality at best and 80% of the reason why KDE 5 is absolutely not ready for production.

On my machine the problem usually stems from some incompatibility of sddm with the kernel.
If you're on the normal kernel, try linux-lts for a change. If lts gives you problems try the normal one. Or safe mode.

Of course, also check what 'journalctl' and 'systemctl status' tell you about the service, sometimes they give good hints.

bade · 2015-11-14 20:41:05

And Plasma won't run with KDM?
How do I know if I'm on normal kernel? I'm running Arch in Virtualbox with standard settings that came with .iso.

Caldazar · 2015-11-15 12:41:21

Plasma 5 only recommends using sddm so in theory it should run with kdm as well but it's deprecated. As the wiki says, "both the Qt OpenGL module and kdm have to be compiled against OpenGL ES" and I'm not sure whether that's the case with the Arch package or if you'd have to recompile that thing. At the time that sounded like too much trouble, so I just went the recommended path.

To figure out which kernel you're running, use

uname -a

The standard kernel is at version 4.2.5-1 at the moment, while lts returns 4.1.12-1-lts.

Running the lts version is basically a matter of installing linux-lts and linux-lts-headers, and then cofiguring your bootloader accordingly.
You can configure a dualboot menu for both kernels with Grub. On bios (as opposed to uefi) I'd use os-prober to get this done automatically.
I don't know how all this works with the other bootloaders though.

As a disclaimer: I can't guarantee you that this will work, especially as you're on a virtual machine. I can say however that on my machine, sddm only works with the lts-kernel.

Last edited by Caldazar (2015-11-15 12:57:44)

bade · 2015-11-15 19:43:29

I tried with kernel-lts. Still won't work. Too bad I'll get back to this once the Plasma 5 matures
Thanks for helping me, guys!

stochastix · 2017-06-28 19:15:15

Hi, I just had this very problem installing Arch in Virtualbox, testing out my Ansible scripts. I am pretty sure you forgot to install virtualbox-guest-modules-arch. I imagine virtualbox-guest-utils you will want also for seamless mouse and other things. I think its the same as the guest additions from Oracle though.

virtualbox-guest-modules-arch will get you the vboxvideo, vboxsf, and vboxguest kernel modules I believe

From the Wiki:
VirtualBox Guest Additions provides drivers and applications that optimize the guest operating system including improved image resolution and better control of the mouse. Within the installed guest system, install:
virtualbox-guest-utils for VirtualBox Guest utilities with X support
virtualbox-guest-utils-nox for VirtualBox Guest utilities without X support

Both packages will make you choose a package to provide guest modules:
for linux kernel choose virtualbox-guest-modules-arch
for other kernels choose virtualbox-guest-dkms

V1del · 2017-06-28 20:01:59

Thanks for sharing, however be aware that virtualbox packages and modules are by virtue a very moving target. Since this thread is over 2 years old chances are that what you are recommending doesn't apply anymore. Please refrain from further necro bumping and pay attention to the dates you are responding to.

Closing.

Arch Linux

#1 2015-11-08 21:51:14

Black screen after sddm start (VirtualBox)

#2 2015-11-09 14:00:50

Re: Black screen after sddm start (VirtualBox)

#3 2015-11-11 20:05:36

Re: Black screen after sddm start (VirtualBox)

#4 2015-11-11 21:17:01

Re: Black screen after sddm start (VirtualBox)

#5 2015-11-12 11:30:28

Re: Black screen after sddm start (VirtualBox)

#6 2015-11-12 11:59:56

Re: Black screen after sddm start (VirtualBox)

#7 2015-11-12 12:32:11

Re: Black screen after sddm start (VirtualBox)

#8 2015-11-12 12:42:13

Re: Black screen after sddm start (VirtualBox)

#9 2015-11-12 19:45:32

Re: Black screen after sddm start (VirtualBox)

#10 2015-11-12 20:33:58

Re: Black screen after sddm start (VirtualBox)

#11 2015-11-12 21:47:20

Re: Black screen after sddm start (VirtualBox)

#12 2015-11-13 07:24:13

Re: Black screen after sddm start (VirtualBox)

#13 2015-11-13 18:41:58

Re: Black screen after sddm start (VirtualBox)

#14 2015-11-13 19:27:10

Re: Black screen after sddm start (VirtualBox)

#15 2015-11-13 23:43:34

Re: Black screen after sddm start (VirtualBox)

#16 2015-11-14 20:41:05

Re: Black screen after sddm start (VirtualBox)

#17 2015-11-15 12:41:21

Re: Black screen after sddm start (VirtualBox)

#18 2015-11-15 19:43:29

Re: Black screen after sddm start (VirtualBox)

#19 2017-06-28 19:15:15

Re: Black screen after sddm start (VirtualBox)

#20 2017-06-28 20:01:59

Re: Black screen after sddm start (VirtualBox)

Board footer