You are not logged in.
After a recent upgrade, my laptop's keyboard (X1 Carbon) became unresponsive under graphical environments (while it works fine before starting a DE): I cannot get past the SDDM login screen (to log into KDE, my usual DE), and even though I can start XFCE manually (after disabling sddm, just run startxfce4), the keyboard is also unresponsive after XFCE starts. The mouse is completely fine.
Attached is the Xorg.0.log; any help would be welcome.
[ 2.637]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 2.637] X Protocol Version 11, Revision 0
[ 2.637] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 2.637] Current Operating System: Linux antony1 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[ 2.637] Kernel command line: \vmlinuz-linux ro root=UUID=8b521849-d74d-4396-9ef2-edd9732d6999 initrd=intel-ucode.img initrd=initramfs-linux.img
[ 2.637] Build Date: 01 November 2015 10:36:50AM
[ 2.637]
[ 2.637] Current version of pixman: 0.32.8
[ 2.637] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.637] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.637] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 11:19:31 2015
[ 2.640] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.640] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.641] (==) No Layout section. Using the first Screen section.
[ 2.641] (==) No screen section available. Using defaults.
[ 2.641] (**) |-->Screen "Default Screen Section" (0)
[ 2.641] (**) | |-->Monitor "<default monitor>"
[ 2.641] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2.641] (**) | |-->Device "Intel Graphics"
[ 2.641] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.641] (==) Automatically adding devices
[ 2.641] (==) Automatically enabling devices
[ 2.641] (==) Automatically adding GPU devices
[ 2.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.643] Entry deleted from font path.
[ 2.643] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.644] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.644] Entry deleted from font path.
[ 2.644] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.644] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.644] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.644] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.644] (II) Loader magic: 0x817d60
[ 2.644] (II) Module ABI versions:
[ 2.644] X.Org ANSI C Emulation: 0.4
[ 2.644] X.Org Video Driver: 19.0
[ 2.644] X.Org XInput driver : 21.1
[ 2.644] X.Org Server Extension : 9.0
[ 2.644] (EE) systemd-logind: failed to get session: PID 360 does not belong to any known session
[ 2.645] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2.646] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:2218 rev 11, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 2.646] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.646] (II) LoadModule: "glx"
[ 2.648] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.660] (II) Module glx: vendor="X.Org Foundation"
[ 2.660] compiled for 1.17.4, module version = 1.0.0
[ 2.660] ABI class: X.Org Server Extension, version 9.0
[ 2.660] (==) AIGLX enabled
[ 2.660] (II) LoadModule: "intel"
[ 2.660] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2.663] (II) Module intel: vendor="X.Org Foundation"
[ 2.663] compiled for 1.17.2, module version = 2.99.917
[ 2.663] Module class: X.Org Video Driver
[ 2.663] ABI class: X.Org Video Driver, version 19.0
[ 2.663] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2.663] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2.663] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2.663] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2.663] (++) using VT number 1
[ 2.664] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.664] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2.664] (==) intel(0): RGB weight 888
[ 2.664] (==) intel(0): Default visual is TrueColor
[ 2.664] (**) intel(0): Option "AccelMethod" "uxa"
[ 2.664] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 2.664] (**) intel(0): Relaxed fencing enabled
[ 2.664] (**) intel(0): Wait on SwapBuffers? enabled
[ 2.664] (**) intel(0): Triple buffering? enabled
[ 2.664] (**) intel(0): Framebuffer tiled
[ 2.664] (**) intel(0): Pixmaps tiled
[ 2.664] (**) intel(0): 3D buffers tiled
[ 2.664] (**) intel(0): SwapBuffers wait enabled
[ 2.664] (==) intel(0): video overlay key set to 0x101fe
[ 2.665] (II) intel(0): Output eDP1 has no monitor section
[ 2.665] (--) intel(0): found backlight control interface intel_backlight
[ 2.665] (II) intel(0): Output DP1 has no monitor section
[ 2.666] (II) intel(0): Output HDMI1 has no monitor section
[ 2.666] (II) intel(0): Output DP2 has no monitor section
[ 2.666] (II) intel(0): Output HDMI2 has no monitor section
[ 2.667] (II) intel(0): EDID for output eDP1
[ 2.667] (II) intel(0): Manufacturer: AUO Model: 303e Serial#: 0
[ 2.667] (II) intel(0): Year: 2012 Week: 0
[ 2.667] (II) intel(0): EDID Version: 1.4
[ 2.667] (II) intel(0): Digital Display Input
[ 2.667] (II) intel(0): 6 bits per channel
[ 2.667] (II) intel(0): Digital interface is DisplayPort
[ 2.667] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 2.667] (II) intel(0): Gamma: 2.20
[ 2.667] (II) intel(0): No DPMS capabilities specified
[ 2.667] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 2.667] (II) intel(0): First detailed timing is preferred mode
[ 2.667] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 2.667] (II) intel(0): redX: 0.600 redY: 0.350 greenX: 0.320 greenY: 0.570
[ 2.667] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 2.667] (II) intel(0): Manufacturer's mask: 0
[ 2.667] (II) intel(0): Supported detailed timing:
[ 2.667] (II) intel(0): clock: 115.2 MHz Image Size: 309 x 174 mm
[ 2.667] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2000 h_border: 0
[ 2.667] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 960 v_border: 0
[ 2.667] (II) intel(0): Unknown vendor-specific block f
[ 2.667] (II) intel(0): AUO
[ 2.667] (II) intel(0): B140RTN03.0
[ 2.667] (II) intel(0): EDID (in hex):
[ 2.667] (II) intel(0): 00ffffffffffff0006af3e3000000000
[ 2.667] (II) intel(0): 00160104951f117802a0959959529226
[ 2.667] (II) intel(0): 21505400000001010101010101010101
[ 2.667] (II) intel(0): 010101010101002d409061843c30402a
[ 2.667] (II) intel(0): 330035ae100000180000000f00000000
[ 2.667] (II) intel(0): 00000000000000000020000000fe0041
[ 2.667] (II) intel(0): 554f0a202020202020202020000000fe
[ 2.667] (II) intel(0): 004231343052544e30332e30200a009d
[ 2.667] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2.667] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2.667] (II) intel(0): Printing probed modes for output eDP1
[ 2.667] (II) intel(0): Modeline "1600x900"x60.0 115.20 1600 1664 1706 2000 900 903 906 960 -hsync -vsync (57.6 kHz eP)
[ 2.667] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2.667] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2.667] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2.667] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2.667] (II) intel(0): EDID for output DP1
[ 2.668] (II) intel(0): EDID for output HDMI1
[ 2.668] (II) intel(0): EDID for output DP2
[ 2.668] (II) intel(0): EDID for output HDMI2
[ 2.668] (II) intel(0): Output eDP1 connected
[ 2.668] (II) intel(0): Output DP1 disconnected
[ 2.668] (II) intel(0): Output HDMI1 disconnected
[ 2.668] (II) intel(0): Output DP2 disconnected
[ 2.668] (II) intel(0): Output HDMI2 disconnected
[ 2.668] (II) intel(0): Using exact sizes for initial modes
[ 2.668] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 2.668] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2.668] (II) intel(0): Kernel page flipping support detected, enabling
[ 2.668] (==) intel(0): DPI set to (96, 96)
[ 2.668] (II) Loading sub module "fb"
[ 2.668] (II) LoadModule: "fb"
[ 2.668] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.669] (II) Module fb: vendor="X.Org Foundation"
[ 2.669] compiled for 1.17.4, module version = 1.0.0
[ 2.669] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.669] (II) Loading sub module "dri2"
[ 2.669] (II) LoadModule: "dri2"
[ 2.669] (II) Module "dri2" already built-in
[ 2.669] (==) Depth 24 pixmap format is 32 bpp
[ 2.669] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 2.670] (II) UXA(0): Driver registered support for the following operations:
[ 2.670] (II) solid
[ 2.670] (II) copy
[ 2.670] (II) composite (RENDER acceleration)
[ 2.670] (II) put_image
[ 2.670] (II) get_image
[ 2.670] (II) intel(0): [DRI2] Setup complete
[ 2.670] (II) intel(0): [DRI2] DRI driver: i965
[ 2.670] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 2.670] (==) intel(0): Backing store enabled
[ 2.670] (==) intel(0): Silken mouse enabled
[ 2.671] (II) intel(0): Initializing HW Cursor
[ 2.671] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2.671] (==) intel(0): DPMS enabled
[ 2.671] (==) intel(0): Intel XvMC decoder enabled
[ 2.671] (II) intel(0): Set up textured video
[ 2.671] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 2.671] (II) intel(0): DRI2: Enabled
[ 2.671] (II) intel(0): DRI3: Disabled
[ 2.671] (==) intel(0): hotplug detection: "enabled"
[ 2.675] (--) RandR disabled
[ 2.699] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2.699] (II) AIGLX: enabled GLX_ARB_create_context
[ 2.699] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2.699] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2.699] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2.699] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2.700] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2.700] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2.700] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2.700] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 2.700] (II) AIGLX: Loaded and initialized i965
[ 2.700] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2.700] (II) intel(0): Setting screen physical size to 423 x 238
[ 2.756] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2.756] (II) No input driver specified, ignoring this device.
[ 2.756] (II) This device may have been added with another device file.
[ 2.756] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 2.756] (II) No input driver specified, ignoring this device.
[ 2.756] (II) This device may have been added with another device file.
[ 2.756] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2.756] (II) No input driver specified, ignoring this device.
[ 2.756] (II) This device may have been added with another device file.
[ 2.757] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2.757] (II) No input driver specified, ignoring this device.
[ 2.757] (II) This device may have been added with another device file.
[ 2.757] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[ 2.757] (II) No input driver specified, ignoring this device.
[ 2.757] (II) This device may have been added with another device file.
[ 2.757] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[ 2.757] (II) No input driver specified, ignoring this device.
[ 2.757] (II) This device may have been added with another device file.
[ 2.757] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 2.757] (II) No input driver specified, ignoring this device.
[ 2.757] (II) This device may have been added with another device file.
[ 2.758] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2.758] (II) No input driver specified, ignoring this device.
[ 2.758] (II) This device may have been added with another device file.
[ 2.758] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 2.758] (II) No input driver specified, ignoring this device.
[ 2.758] (II) This device may have been added with another device file.
[ 2.758] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2.758] (II) No input driver specified, ignoring this device.
[ 2.758] (II) This device may have been added with another device file.
[ 2.758] (II) config/udev: Adding input device Integrated Camera (/dev/input/event13)
[ 2.758] (II) No input driver specified, ignoring this device.
[ 2.758] (II) This device may have been added with another device file.
[ 2.759] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2.759] (II) No input driver specified, ignoring this device.
[ 2.759] (II) This device may have been added with another device file.
[ 2.759] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 2.759] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2.759] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2.759] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Clickpad"
[ 2.759] (II) LoadModule: "evdev"
[ 2.759] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2.761] (II) Module evdev: vendor="X.Org Foundation"
[ 2.761] compiled for 1.17.1, module version = 2.9.2
[ 2.761] Module class: X.Org XInput Driver
[ 2.761] ABI class: X.Org XInput driver, version 21.0
[ 2.761] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 2.761] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2.761] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event14"
[ 2.761] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2.761] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
[ 2.761] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 2.762] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 2.762] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 2.762] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 2.762] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 2.762] (**) Option "Device" "/dev/input/event14"
[ 2.800] (II) evdev: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2.800] (II) evdev: SynPS/2 Synaptics TouchPad: found top buttonpad property
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: x-axis range 1024 - 5112 (res 42)
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: y-axis range 2024 - 4832 (res 42)
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2.800] (**) Option "AreaTopEdge" "40%"
[ 2.800] (**) Option "AreaBottomEdge" "0"
[ 2.800] (**) Option "TapButton1" "1"
[ 2.800] (**) Option "TapButton2" "3"
[ 2.800] (**) Option "TapButton3" "2"
[ 2.800] (**) Option "SoftButtonAreas" "60% 0 0 40% 40% 60% 0 40%"
[ 2.800] (**) Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
[ 2.800] (--) evdev: SynPS/2 Synaptics TouchPad: touchpad found
[ 2.800] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2.813] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event14"
[ 2.813] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 6)
[ 2.813] (**) evdev: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2.813] (**) evdev: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2.813] (**) evdev: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 2.813] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2.813] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2.813] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2.813] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2.813] (--) evdev: SynPS/2 Synaptics TouchPad: touchpad found
[ 2.813] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2.813] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2.814] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 2.814] (II) No input driver specified, ignoring this device.
[ 2.814] (II) This device may have been added with another device file.
[ 2.814] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 2.814] (II) No input driver specified, ignoring this device.
[ 2.814] (II) This device may have been added with another device file.
[ 3.319] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 6.369] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 6.369] (II) No input driver specified, ignoring this device.
[ 6.369] (II) This device may have been added with another device file.
[ 6.399] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 6.399] (II) No input driver specified, ignoring this device.
[ 6.399] (II) This device may have been added with another device file.
[ 20.320] (II) UnloadModule: "evdev"
[ 21.430] (II) Server terminated successfully (0). Closing log file.Last edited by antony (2015-11-12 06:34:53)
Offline
Is there anything logged in dmesg / journalctl that indicates a problem with the keyboard? Also check your pacman.log to see which package upgrade could have caused this.
Offline
dmesg:
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
[ 0.000000] Command line: \vmlinuz-linux ro root=UUID=8b521849-d74d-4396-9ef2-edd9732d6999 initrd=intel-ucode.img initrd=initramfs-linux.img
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf138fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf139000-0x00000000cf33afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf33b000-0x00000000da45efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da45f000-0x00000000dcd3efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dcefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dcf00000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xced56018-0xced62057] usable ==> usable
[ 0.000000] e820: update [mem 0xced28018-0xced38057] usable ==> usable
[ 0.000000] e820: update [mem 0xced1c018-0xced27057] usable ==> usable
[ 0.000000] e820: update [mem 0xced0b018-0xced1b657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008c000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ced0b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced0b018-0x00000000ced1b657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced1b658-0x00000000ced1c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced1c018-0x00000000ced27057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced27058-0x00000000ced28017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced28018-0x00000000ced38057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced38058-0x00000000ced56017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced56018-0x00000000ced62057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ced62058-0x00000000cf138fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cf139000-0x00000000cf33afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cf33b000-0x00000000da45efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000da45f000-0x00000000dcd3efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dceff000-0x00000000dcefffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dcf00000-0x00000000df9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011e5fffff] usable
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI=0xdcefe000 ACPI 2.0=0xdcefe014 SMBIOS=0xdcd3e000
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20A7CTO1WW/20A7CTO1WW, BIOS GRET32WW (1.09 ) 02/13/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdcf00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000063000] 63000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11e400000-0x11e5fffff]
[ 0.000000] [mem 0x11e400000-0x11e5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11e3fffff]
[ 0.000000] [mem 0x100000000-0x11e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xcf138fff]
[ 0.000000] [mem 0xc0000000-0xceffffff] page 2M
[ 0.000000] [mem 0xcf000000-0xcf138fff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf33b000-0xda45efff]
[ 0.000000] [mem 0xcf33b000-0xcf3fffff] page 4k
[ 0.000000] [mem 0xcf400000-0xda3fffff] page 2M
[ 0.000000] [mem 0xda400000-0xda45efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdceff000-0xdcefffff]
[ 0.000000] [mem 0xdceff000-0xdcefffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc00000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DCEFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000DC (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCEF9000 00010C (v05 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCEE1000 012D6B (v01 LENOVO TP-GR 00001090 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCE4A000 000040
[ 0.000000] ACPI: DBGP 0x00000000DCEFC000 000034 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DCEFB000 000052 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCEF8000 000038 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCEF7000 000098 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCEF6000 00003C (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEF4000 00044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEE0000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDF000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDE000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDC000 001215 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: PCCT 0x00000000DCEDA000 00006E (v05 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[ 0.000000] ACPI: TCPA 0x00000000DCED8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DCED7000 000042 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x00000000DCDB2000 000055 (v03 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: ASF! 0x00000000DCEFD000 0000A5 (v32 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCED6000 000046 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCED5000 000064 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCED4000 0002E2 (v01 LENOVO TP-GR 00001090 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCED3000 00047F (v01 LENOVO IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11e5f9000-0x11e5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880119c00000-ffff88011dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf138fff]
[ 0.000000] node 0: [mem 0x00000000cf33b000-0x00000000da45efff]
[ 0.000000] node 0: [mem 0x00000000dceff000-0x00000000dcefffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[ 0.000000] On node 0 totalpages: 1017832
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 72 pages reserved
[ 0.000000] DMA zone: 3978 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13898 pages used for memmap
[ 0.000000] DMA32 zone: 889438 pages, LIFO batch:31
[ 0.000000] Normal zone: 1944 pages used for memmap
[ 0.000000] Normal zone: 124416 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced0b000-0xced0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced1b000-0xced1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced1c000-0xced1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced27000-0xced27fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced28000-0xced28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced38000-0xced38fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced56000-0xced56fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced62000-0xced62fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf139000-0xcf33afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda45f000-0xdcd3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf00000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88011e200000 s91480 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1001854
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: \vmlinuz-linux ro root=UUID=8b521849-d74d-4396-9ef2-edd9732d6999 initrd=intel-ucode.img initrd=initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3840396K/4071328K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 230932K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.194 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.23 BogoMIPS (lpj=8313980)
[ 0.000040] pid_max: default: 32768 minimum: 301
[ 0.000045] ACPI: Core revision 20150619
[ 0.020758] ACPI: All ACPI Tables successfully acquired
[ 0.054893] Security Framework initialized
[ 0.054897] Yama: becoming mindful.
[ 0.055224] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.056180] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.056605] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.056613] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.056825] Initializing cgroup subsys blkio
[ 0.056828] Initializing cgroup subsys memory
[ 0.056836] Initializing cgroup subsys devices
[ 0.056838] Initializing cgroup subsys freezer
[ 0.056840] Initializing cgroup subsys net_cls
[ 0.056865] CPU: Physical Processor ID: 0
[ 0.056866] CPU: Processor Core ID: 0
[ 0.056871] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.056872] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.058014] mce: CPU supports 7 MCE banks
[ 0.058029] CPU0: Thermal monitoring enabled (TM1)
[ 0.058038] process: using mwait in idle threads
[ 0.058042] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.058043] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.058409] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[ 0.062862] ftrace: allocating 22161 entries in 87 pages
[ 0.073953] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.074631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107678] TSC deadline timer enabled
[ 0.107681] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45, stepping: 01)
[ 0.107710] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.107734] ... version: 3
[ 0.107735] ... bit width: 48
[ 0.107736] ... generic registers: 4
[ 0.107737] ... value mask: 0000ffffffffffff
[ 0.107738] ... max period: 0000ffffffffffff
[ 0.107739] ... fixed-purpose events: 3
[ 0.107740] ... event mask: 000000070000000f
[ 0.121138] x86: Booting SMP configuration:
[ 0.121140] .... node #0, CPUs: #1
[ 0.125671] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.128937] #2
[ 0.131475] microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.135633] #3
[ 0.140079] x86: Booted up 1 node, 4 CPUs
[ 0.140082] smpboot: Total of 4 processors activated (19961.95 BogoMIPS)
[ 0.144589] devtmpfs: initialized
[ 0.146991] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
[ 0.147103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.147202] pinctrl core: initialized pinctrl subsystem
[ 0.147251] RTC time: 19:48:38, date: 11/10/15
[ 0.147385] NET: Registered protocol family 16
[ 0.157768] cpuidle: using governor ladder
[ 0.171125] cpuidle: using governor menu
[ 0.171222] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.171224] ACPI: bus type PCI registered
[ 0.171226] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.171418] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.171420] PCI: not using MMCONFIG
[ 0.171422] PCI: Using configuration type 1 for base access
[ 0.171635] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.188154] ACPI: Added _OSI(Module Device)
[ 0.188156] ACPI: Added _OSI(Processor Device)
[ 0.188158] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.188159] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190428] ACPI : EC: EC description table is found, configuring boot EC
[ 0.190442] ACPI : EC: EC started
[ 0.196937] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.198987] ACPI: Dynamic OEM Table Load:
[ 0.199001] ACPI: SSDT 0xFFFF880118C68800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.199846] ACPI: Dynamic OEM Table Load:
[ 0.199859] ACPI: SSDT 0xFFFF880118C69000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.200754] ACPI: Dynamic OEM Table Load:
[ 0.200764] ACPI: SSDT 0xFFFF880118F78000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.202037] ACPI: Interpreter enabled
[ 0.202046] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.202052] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.202069] ACPI: (supports S0 S3 S4 S5)
[ 0.202070] ACPI: Using IOAPIC for interrupt routing
[ 0.202087] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.202558] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.202580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.205350] ACPI: Power Resource [PUBS] (on)
[ 0.209863] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.209929] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.209990] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210050] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210110] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210289] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.210382] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.210388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.210506] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.210557] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.210559] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.210562] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.210563] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.210726] PCI host bridge to bus 0000:00
[ 0.210729] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.210732] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.210734] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.210736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.210738] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.210739] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.210748] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.210850] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.210866] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.210874] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.210880] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.210967] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.210981] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
[ 0.211091] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.211116] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
[ 0.211163] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.211204] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.211248] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.211278] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit]
[ 0.211334] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.211411] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 0.211437] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
[ 0.211446] pci 0000:00:16.3: reg 0x14: [mem 0xf053f000-0xf053ffff]
[ 0.211568] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 0.211592] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[ 0.211600] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
[ 0.211608] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.211651] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.211690] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.211734] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.211758] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
[ 0.211811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211890] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[ 0.211957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.212080] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[ 0.212151] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.212227] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.212276] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.212305] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
[ 0.212374] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.212421] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.212465] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.212639] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.212659] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.212667] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 0.212674] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.212681] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 0.212688] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.212696] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
[ 0.212719] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212790] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.212806] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
[ 0.212826] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.212951] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.213161] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[ 0.213274] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.213522] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.219250] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.219256] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.220431] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.220528] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
[ 0.220643] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.220645] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220648] vgaarb: loaded
[ 0.220649] vgaarb: bridge control possible 0000:00:02.0
[ 0.220787] PCI: Using ACPI for IRQ routing
[ 0.222162] PCI: pci_cache_line_size set to 64 bytes
[ 0.222478] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.222480] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[ 0.222481] e820: reserve RAM buffer [mem 0xced0b018-0xcfffffff]
[ 0.222483] e820: reserve RAM buffer [mem 0xced1c018-0xcfffffff]
[ 0.222485] e820: reserve RAM buffer [mem 0xced28018-0xcfffffff]
[ 0.222486] e820: reserve RAM buffer [mem 0xced56018-0xcfffffff]
[ 0.222488] e820: reserve RAM buffer [mem 0xcf139000-0xcfffffff]
[ 0.222489] e820: reserve RAM buffer [mem 0xda45f000-0xdbffffff]
[ 0.222490] e820: reserve RAM buffer [mem 0xdcf00000-0xdfffffff]
[ 0.222492] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[ 0.222613] NetLabel: Initializing
[ 0.222615] NetLabel: domain hash size = 128
[ 0.222616] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.222628] NetLabel: unlabeled traffic allowed by default
[ 0.222663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.222669] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.224701] clocksource: Switched to clocksource hpet
[ 0.230388] pnp: PnP ACPI init
[ 0.230820] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.230823] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.230825] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.230827] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.230829] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.230831] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.230833] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.230835] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.230837] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.230839] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.230840] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.230842] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.230844] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.230846] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.230848] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.230850] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.230852] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
[ 0.230856] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.230973] system 00:01: [io 0x1800-0x189f] could not be reserved
[ 0.230976] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.230978] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.230980] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.230982] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.230984] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.230986] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.230988] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.230989] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.230991] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.230993] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.230995] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.230998] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.231000] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.231002] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.231004] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.231006] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.231008] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.231010] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.231013] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231068] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.231093] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.231117] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13 (active)
[ 0.231164] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.231630] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.231634] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231685] pnp: PnP ACPI: found 7 devices
[ 0.238139] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.238158] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.238161] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.238164] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.238177] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.238179] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.238182] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.238184] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.238186] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.238188] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.238193] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
[ 0.238198] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.238201] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.238204] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.238209] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.238214] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
[ 0.238218] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.238224] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.238229] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.238238] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.238240] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.238242] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.238244] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[ 0.238246] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.238248] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.238249] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff]
[ 0.238251] pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.238253] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.238288] NET: Registered protocol family 2
[ 0.238478] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.238556] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.238622] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.238649] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.238665] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.238716] NET: Registered protocol family 1
[ 0.238731] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.239171] PCI: CLS 64 bytes, default 64
[ 0.239220] Unpacking initramfs...
[ 0.312411] Freeing initrd memory: 4096K (ffff88007fc00000 - ffff880080000000)
[ 0.312423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.312427] software IO TLB [mem 0xc95f5000-0xcd5f5000] (64MB) mapped at [ffff8800c95f5000-ffff8800cd5f4fff]
[ 0.312489] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.312491] hw unit of domain pp0-core 2^-14 Joules
[ 0.312492] hw unit of domain package 2^-14 Joules
[ 0.312493] hw unit of domain dram 2^-14 Joules
[ 0.312494] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.312534] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[ 0.312535] ------------[ cut here ]------------
[ 0.312540] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x234/0x390()
[ 0.312541] Info: mapping multiple BARs. Your kernel is fine.
[ 0.312542] Modules linked in:
[ 0.312546] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.5-1-ARCH #1
[ 0.312548] Hardware name: LENOVO 20A7CTO1WW/20A7CTO1WW, BIOS GRET32WW (1.09 ) 02/13/2014
[ 0.312550] 0000000000000000 00000000266a4b5a ffff8801193cbab8 ffffffff81570d0a
[ 0.312553] 0000000000000000 ffff8801193cbb10 ffff8801193cbaf8 ffffffff810748a6
[ 0.312556] ffff8801193cbb28 00000000fed10000 ffffc90000658000 0000000000006000
[ 0.312558] Call Trace:
[ 0.312564] [<ffffffff81570d0a>] dump_stack+0x4c/0x6e
[ 0.312568] [<ffffffff810748a6>] warn_slowpath_common+0x86/0xc0
[ 0.312570] [<ffffffff81074935>] warn_slowpath_fmt+0x55/0x70
[ 0.312573] [<ffffffff81063ad4>] __ioremap_caller+0x234/0x390
[ 0.312575] [<ffffffff81063c47>] ioremap_nocache+0x17/0x20
[ 0.312579] [<ffffffff8103a669>] snb_uncore_imc_init_box+0x79/0xb0
[ 0.312582] [<ffffffff810389c6>] uncore_pci_probe+0xd6/0x210
[ 0.312586] [<ffffffff812fa545>] local_pci_probe+0x45/0xa0
[ 0.312588] [<ffffffff812fa490>] ? pci_match_device+0xe0/0x110
[ 0.312590] [<ffffffff812fa693>] pci_device_probe+0xf3/0x140
[ 0.312593] [<ffffffff813d4ad4>] driver_probe_device+0x1f4/0x460
[ 0.312595] [<ffffffff813d4dd0>] __driver_attach+0x90/0xa0
[ 0.312597] [<ffffffff813d4d40>] ? driver_probe_device+0x460/0x460
[ 0.312601] [<ffffffff813d26fc>] bus_for_each_dev+0x6c/0xc0
[ 0.312604] [<ffffffff813d42ce>] driver_attach+0x1e/0x20
[ 0.312607] [<ffffffff813d3e2b>] bus_add_driver+0x1eb/0x280
[ 0.312609] [<ffffffff8190f0fe>] ? uncore_types_exit+0x26/0x26
[ 0.312611] [<ffffffff813d56e0>] driver_register+0x60/0xe0
[ 0.312614] [<ffffffff812f9cbc>] __pci_register_driver+0x4c/0x50
[ 0.312616] [<ffffffff8190f1d0>] intel_uncore_init+0xd2/0x2b7
[ 0.312618] [<ffffffff8190f0fe>] ? uncore_types_exit+0x26/0x26
[ 0.312621] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 0.312625] [<ffffffff81091b81>] ? parse_args+0x271/0x4a0
[ 0.312627] [<ffffffff819001bc>] kernel_init_freeable+0x179/0x218
[ 0.312630] [<ffffffff815672c0>] ? rest_init+0x90/0x90
[ 0.312631] [<ffffffff815672ce>] kernel_init+0xe/0xe0
[ 0.312634] [<ffffffff8157665f>] ret_from_fork+0x3f/0x70
[ 0.312636] [<ffffffff815672c0>] ? rest_init+0x90/0x90
[ 0.312641] ---[ end trace 0da7fd4b0193b48b ]---
[ 0.312721] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.312727] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.312736] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.312745] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.312796] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.312886] Scanning for low memory corruption every 60 seconds
[ 0.313189] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.313211] Initialise system trusted keyring
[ 0.313587] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.315283] zpool: loaded
[ 0.315285] zbud: loaded
[ 0.315493] VFS: Disk quotas dquot_6.6.0
[ 0.315531] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.315700] Key type big_key registered
[ 0.315838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.315880] io scheduler noop registered
[ 0.315885] io scheduler deadline registered
[ 0.315921] io scheduler cfq registered (default)
[ 0.316235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.316242] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.316259] efifb: probing for efifb
[ 0.316271] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90000a00000, using 1200k, total 1200k
[ 0.316273] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.316274] efifb: scrolling: redraw
[ 0.316276] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.317161] Console: switching to colour frame buffer device 80x30
[ 0.317940] fb0: EFI VGA frame buffer device
[ 0.317949] intel_idle: MWAIT substates: 0x11142120
[ 0.317951] intel_idle: v0.4 model 0x45
[ 0.317952] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.318249] GHES: HEST is not enabled!
[ 0.318321] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.339074] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 17, base_baud = 115200) is a 16550A
[ 0.339271] Linux agpgart interface v0.103
[ 0.339659] rtc_cmos 00:02: RTC can wake from S4
[ 0.339813] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.339841] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.339853] Intel P-state driver initializing.
[ 0.340015] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.340857] NET: Registered protocol family 10
[ 0.341272] NET: Registered protocol family 17
[ 0.342092] Loading compiled-in X.509 certificates
[ 0.342118] registered taskstats version 1
[ 0.342140] zswap: loading zswap
[ 0.342145] zswap: using zbud pool
[ 0.342154] zswap: using lzo compressor
[ 0.343096] Magic number: 7:585:849
[ 0.343104] index1: hash matches
[ 0.343108] index1: hash matches
[ 0.343110] index1: hash matches
[ 0.343113] index1: hash matches
[ 0.343134] graphics fbcon: hash matches
[ 0.343239] rtc_cmos 00:02: setting system clock to 2015-11-10 19:48:38 UTC (1447184918)
[ 0.343489] PM: Hibernation image not present or could not be loaded.
[ 0.344139] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[ 0.344143] Write protecting the kernel read-only data: 8192k
[ 0.344731] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
[ 0.344974] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
[ 0.354661] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.373176] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.375529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.375540] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.379468] ACPI: bus type USB registered
[ 0.379487] usbcore: registered new interface driver usbfs
[ 0.379494] usbcore: registered new interface driver hub
[ 0.379518] usbcore: registered new device driver usb
[ 0.380089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.380335] ehci-pci: EHCI PCI platform driver
[ 0.380491] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.380500] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.380514] ehci-pci 0000:00:1d.0: debug port 2
[ 0.381218] SCSI subsystem initialized
[ 0.382273] libata version 3.00 loaded.
[ 0.384411] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.384428] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
[ 0.391587] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.391787] hub 1-0:1.0: USB hub found
[ 0.391794] hub 1-0:1.0: 3 ports detected
[ 0.392122] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.392130] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.392212] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
[ 0.392218] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.392433] hub 2-0:1.0: USB hub found
[ 0.392448] hub 2-0:1.0: 9 ports detected
[ 0.394190] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.394194] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.394347] hub 3-0:1.0: USB hub found
[ 0.394360] hub 3-0:1.0: 4 ports detected
[ 0.395285] ahci 0000:00:1f.2: version 3.0
[ 0.396158] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.408337] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 0.408347] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.408815] scsi host0: ahci
[ 0.408938] scsi host1: ahci
[ 0.409040] scsi host2: ahci
[ 0.409096] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100 irq 41
[ 0.409098] ata2: DUMMY
[ 0.409099] ata3: DUMMY
[ 0.698635] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.728667] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.730522] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.730527] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.730605] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 0.730963] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 0.731023] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.731025] ata1.00: ATA-9: SAMSUNG MZNTD128HAGM-000L1, DXT23L0Q, max UDMA/133
[ 0.731027] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.731328] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.731331] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.731358] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 0.731542] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.731600] ata1.00: configured for UDMA/133
[ 0.731748] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZNTD128 3L0Q PQ: 0 ANSI: 5
[ 0.734192] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.734263] sd 0:0:0:0: [sda] Write Protect is off
[ 0.734268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.734298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.735820] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 0.736811] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.751970] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 0.822753] hub 1-1:1.0: USB hub found
[ 0.823042] hub 1-1:1.0: 8 ports detected
[ 1.089025] usb 1-1.8: new high-speed USB device number 3 using ehci-pci
[ 1.093486] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.140212] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.163120] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.163265] systemd[1]: Detected architecture x86-64.
[ 1.163642] systemd[1]: Set hostname to <antony1>.
[ 1.226596] systemd[1]: psd.service: Cannot add dependency job, ignoring: Unit psd.service failed to load: No such file or directory.
[ 1.226622] systemd[1]: psd-resync.service: Cannot add dependency job, ignoring: Unit psd-resync.service failed to load: No such file or directory.
[ 1.226625] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 1.227184] systemd[1]: Created slice User and Session Slice.
[ 1.227342] systemd[1]: Created slice System Slice.
[ 1.227489] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.227713] systemd[1]: Listening on udev Control Socket.
[ 1.227793] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.227876] systemd[1]: Listening on Journal Socket.
[ 1.228266] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.229240] systemd[1]: Mounting Temporary Directory...
[ 1.229630] systemd[1]: Mounting Huge Pages File System...
[ 1.230088] systemd[1]: Mounting Debug File System...
[ 1.231218] systemd[1]: Starting Set Up Additional Binary Formats...
[ 1.231354] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.233744] systemd[1]: Listening on udev Kernel Socket.
[ 1.234676] systemd[1]: Starting Setup Virtual Console...
[ 1.235313] systemd[1]: Reached target Slices.
[ 1.237606] systemd[1]: Starting Load Kernel Modules...
[ 1.238074] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.238620] systemd[1]: Created slice system-getty.slice.
[ 1.239076] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.239492] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.240133] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.240662] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.241274] systemd[1]: Reached target Paths.
[ 1.241774] systemd[1]: Reached target Encrypted Volumes.
[ 1.242644] systemd[1]: Starting Journal Service...
[ 1.243260] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.243921] systemd[1]: Reached target Remote File Systems.
[ 1.244636] systemd[1]: Starting File System Check on Root Device...
[ 1.245887] systemd[1]: Mounted Huge Pages File System.
[ 1.246319] systemd[1]: Mounted Debug File System.
[ 1.246699] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.247089] systemd[1]: Mounted Temporary Directory.
[ 1.247617] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.248343] systemd[1]: Started Setup Virtual Console.
[ 1.248829] systemd[1]: Started Load Kernel Modules.
[ 1.249324] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 143 (systemd-binfmt)
[ 1.256886] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 1.257605] systemd[1]: Starting Apply Kernel Variables...
[ 1.258329] systemd[1]: Mounting Configuration File System...
[ 1.260697] systemd[1]: Mounted Configuration File System.
[ 1.261619] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 1.264357] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.266114] systemd[1]: Started Apply Kernel Variables.
[ 1.273385] systemd[1]: Started Journal Service.
[ 1.279210] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[ 1.280058] EXT4-fs (sda5): re-mounted. Opts: data=ordered,discard
[ 1.312580] tsc: Refined TSC clocksource calibration: 2494.226 MHz
[ 1.312585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns
[ 1.329056] Adding 2097148k swap on /swapfile. Priority:-1 extents:40 across:6684668k SSFS
[ 1.350185] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.350346] ACPI: Lid Switch [LID]
[ 1.350412] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.350416] ACPI: Sleep Button [SLPB]
[ 1.350489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.350492] ACPI: Power Button [PWRF]
[ 1.351885] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.351889] ACPI: Thermal Zone [THM0] (37 C)
[ 1.373428] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.373811] pps_core: LinuxPPS API ver. 1 registered
[ 1.373813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.374483] PTP clock support registered
[ 1.386380] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.388233] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[ 1.388236] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.388372] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.390413] [drm] Initialized drm 1.1.0 20060810
[ 1.395084] ACPI: Battery Slot [BAT0] (battery present)
[ 1.395291] ACPI: AC Adapter [AC] (on-line)
[ 1.406068] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.407232] Non-volatile memory driver v1.3
[ 1.410272] wmi: Mapper loaded
[ 1.412588] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 1.412591] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1.412592] thinkpad_acpi: ThinkPad BIOS GRET32WW (1.09 ), EC unknown
[ 1.412594] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model 20A7CTO1WW
[ 1.420155] media: Linux media interface: v0.10
[ 1.421112] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
[ 1.422315] thinkpad_acpi: unknown version of the HKEY interface: 0x200
[ 1.423216] thinkpad_acpi: please report this to ibm-acpi-devel@lists.sourceforge.net
[ 1.425235] thinkpad_acpi: radio switch found; radios are enabled
[ 1.425371] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 1.425373] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 1.431099] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1.437667] Linux video capture interface: v2.00
[ 1.464702] Intel(R) Wireless WiFi driver for Linux
[ 1.464705] Copyright(c) 2003- 2015 Intel Corporation
[ 1.466956] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2
[ 1.467262] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-14.ucode failed with error -2
[ 1.467771] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 1.468397] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 1.470389] iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
[ 1.480615] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7036)
[ 1.482338] AVX2 version of gcm_enc/dec engaged.
[ 1.482341] AES CTR mode by8 optimization enabled
[ 1.486110] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8
[ 1.486230] usbcore: registered new interface driver uvcvideo
[ 1.486232] USB Video Class driver (1.1.1)
[ 1.496069] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 1.496761] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 1.497265] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 1.513075] iTCO_vendor_support: vendor-support=0
[ 1.529889] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.529929] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.530030] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.544474] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered,discard
[ 1.554272] kvm: disabled by bios
[ 1.582045] systemd-journald[156]: Received request to flush runtime journal from PID 1
[ 1.604052] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.604136] scsi host3: usb-storage 2-1:1.0
[ 1.604210] usbcore: registered new interface driver usb-storage
[ 1.616622] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.616627] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:eb:87:43
[ 1.616629] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.616665] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 1.617264] systemd-journald[156]: File /var/log/journal/cbabced2def04e66abd72f2b9a977e0a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.617879] [drm] Memory usable by graphics device = 2048M
[ 1.617884] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[ 1.617886] fb: switching to inteldrmfb from EFI VGA
[ 1.617910] Console: switching to colour dummy device 80x25
[ 1.618012] [drm] Replacing VGA console driver
[ 1.626377] usbcore: registered new interface driver uas
[ 1.627505] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.627508] [drm] Driver supports precise vblank timestamp query.
[ 1.627606] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.631752] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.641027] intel_rapl: Found RAPL domain package
[ 1.641032] intel_rapl: Found RAPL domain core
[ 1.641035] intel_rapl: Found RAPL domain uncore
[ 1.641037] intel_rapl: Found RAPL domain dram
[ 1.643675] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.643680] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.643683] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.643685] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 1.643687] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 1.643689] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 1.643691] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 1.645168] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered,discard
[ 1.667693] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 1.668314] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 1.668366] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 1.690247] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.691035] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.691364] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 1.691483] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 1.691488] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 1.692486] fbcon: inteldrmfb (fb0) is primary device
[ 1.729227] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 1.961432] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[ 1.995234] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[ 1.995238] psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5112], y [2024..4832]
[ 2.061336] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id: 1545510
[ 2.061344] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.103338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.107180] mousedev: PS/2 mouse device common for all mice
[ 2.121878] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 2.121960] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 2.122030] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 2.313842] clocksource: Switched to clocksource tsc
[ 2.614192] scsi 3:0:0:0: Direct-Access JetFlash TS1GJFV20 8.07 PQ: 0 ANSI: 2
[ 2.615020] sd 3:0:0:0: [sdb] 1986560 512-byte logical blocks: (1.01 GB/970 MiB)
[ 2.615180] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.615182] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.615336] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2.615338] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2.616898] random: nonblocking pool is initialized
[ 2.616908] sdb: sdb1 sdb2
[ 2.618763] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 2.763890] Console: switching to colour frame buffer device 200x56
[ 2.766954] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.766954] i915 0000:00:02.0: registered panic notifier
[ 3.415522] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 3.622006] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 3.628496] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3.628864] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.629367] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.816952] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.817553] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.847126] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3.915358] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6.451936] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.671721] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 14.752418] systemd-journald[156]: File /var/log/journal/cbabced2def04e66abd72f2b9a977e0a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 18.030077] wlp3s0: authenticate with a0:cf:5b:3c:a3:41
[ 18.037783] wlp3s0: direct probe to a0:cf:5b:3c:a3:41 (try 1/3)
[ 18.242947] wlp3s0: direct probe to a0:cf:5b:3c:a3:41 (try 2/3)
[ 18.446507] wlp3s0: direct probe to a0:cf:5b:3c:a3:41 (try 3/3)
[ 18.648355] wlp3s0: authentication with a0:cf:5b:3c:a3:41 timed out
[ 22.077218] wlp3s0: authenticate with a0:cf:5b:3c:9b:11
[ 22.083216] wlp3s0: send auth to a0:cf:5b:3c:9b:11 (try 1/3)
[ 22.084803] wlp3s0: authenticated
[ 22.085437] wlp3s0: associate with a0:cf:5b:3c:9b:11 (try 1/3)
[ 22.188917] wlp3s0: associate with a0:cf:5b:3c:9b:11 (try 2/3)
[ 22.192827] wlp3s0: RX AssocResp from a0:cf:5b:3c:9b:11 (capab=0x421 status=12 aid=0)
[ 22.192836] wlp3s0: a0:cf:5b:3c:9b:11 denied association (code=12)
[ 22.340420] wlp3s0: authenticate with a0:cf:5b:3c:9e:31
[ 22.345738] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 1/3)
[ 22.551242] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 2/3)
[ 22.754425] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 3/3)
[ 22.956416] wlp3s0: authentication with a0:cf:5b:3c:9e:31 timed out
[ 26.385342] wlp3s0: authenticate with a0:cf:5b:3c:9b:11
[ 26.390567] wlp3s0: send auth to a0:cf:5b:3c:9b:11 (try 1/3)
[ 26.391852] wlp3s0: authenticated
[ 26.393474] wlp3s0: associate with a0:cf:5b:3c:9b:11 (try 1/3)
[ 26.397102] wlp3s0: RX AssocResp from a0:cf:5b:3c:9b:11 (capab=0x431 status=0 aid=22)
[ 26.398484] wlp3s0: associated
[ 26.398508] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 26.500019] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[ 26.553802] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 152.623060] wlp3s0: authenticate with a0:cf:5b:3c:9e:31
[ 152.630426] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 1/3)
[ 152.834232] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 2/3)
[ 153.037720] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 3/3)
[ 153.239576] wlp3s0: authentication with a0:cf:5b:3c:9e:31 timed out
[ 153.416706] wlp3s0: authenticate with a0:cf:5b:3c:9b:11
[ 153.421845] wlp3s0: send auth to a0:cf:5b:3c:9b:11 (try 1/3)
[ 153.423515] wlp3s0: authenticated
[ 153.426422] wlp3s0: associate with a0:cf:5b:3c:9b:11 (try 1/3)
[ 153.430185] wlp3s0: RX AssocResp from a0:cf:5b:3c:9b:11 (capab=0x431 status=0 aid=22)
[ 153.436181] wlp3s0: associated
[ 153.441053] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[ 205.630615] usb 2-1: USB disconnect, device number 2
[ 6852.239086] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[ 6869.914851] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[ 8234.948413] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 8234.963285] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 8234.963370] scsi host4: usb-storage 3-1:1.0
[ 8235.963159] scsi 4:0:0:0: Direct-Access WD Elements 10B8 1012 PQ: 0 ANSI: 6
[ 8235.964278] sd 4:0:0:0: [sdb] Spinning up disk...
[ 8236.967179] ......ready
[ 8241.989886] sd 4:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8241.990249] sd 4:0:0:0: [sdb] Write Protect is off
[ 8241.990259] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 8241.990591] sd 4:0:0:0: [sdb] No Caching mode page found
[ 8241.992496] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8242.002972] sdb: sdb1 sdb2
[ 8242.004340] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 8625.697773] usb 3-1: USB disconnect, device number 2
[ 8626.692172] usb 2-1: new high-speed USB device number 6 using xhci_hcd
[10296.867851] usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
[10296.883333] usb-storage 3-1:1.0: USB Mass Storage device detected
[10296.883976] scsi host5: usb-storage 3-1:1.0
[10297.882583] scsi 5:0:0:0: Direct-Access WD Elements 10B8 1012 PQ: 0 ANSI: 6
[10297.883595] sd 5:0:0:0: [sdb] Spinning up disk...
[10298.886577] .......ready
[10304.913695] sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[10304.914075] sd 5:0:0:0: [sdb] Write Protect is off
[10304.914084] sd 5:0:0:0: [sdb] Mode Sense: 47 00 10 08
[10304.914355] sd 5:0:0:0: [sdb] No Caching mode page found
[10304.916295] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10304.978156] sdb: sdb1 sdb2
[10304.980585] sd 5:0:0:0: [sdb] Attached SCSI disk
[10408.325162] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[10408.358827] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[10423.699754] fuse init (API version 7.23)
[10461.732305] usb 2-1: new high-speed USB device number 7 using xhci_hcd
[10461.915916] usb 3-1: USB disconnect, device number 3
[12536.971739] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12541.154318] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12569.386629] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12571.059653] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12590.926994] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12594.691300] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12859.343196] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[12863.107309] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:3c:9b:11
[20799.680731] usb 3-1: new SuperSpeed USB device number 4 using xhci_hcd
[20799.696460] usb-storage 3-1:1.0: USB Mass Storage device detected
[20799.697078] scsi host6: usb-storage 3-1:1.0
[20800.695494] scsi 6:0:0:0: Direct-Access WD Elements 10B8 1012 PQ: 0 ANSI: 6
[20800.696516] sd 6:0:0:0: [sdb] Spinning up disk...
[20801.699530] .......ready
[20807.726454] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[20807.726741] sd 6:0:0:0: [sdb] Write Protect is off
[20807.726745] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[20807.727013] sd 6:0:0:0: [sdb] No Caching mode page found
[20807.727016] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[20807.790313] sdb: sdb1 sdb2
[20807.791242] sd 6:0:0:0: [sdb] Attached SCSI disk
[20870.988226] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20895.999276] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20899.174108] wlp3s0: authenticate with a0:cf:5b:3c:9b:11
[20899.181630] wlp3s0: direct probe to a0:cf:5b:3c:9b:11 (try 1/3)
[20899.385858] wlp3s0: direct probe to a0:cf:5b:3c:9b:11 (try 2/3)
[20899.588466] wlp3s0: direct probe to a0:cf:5b:3c:9b:11 (try 3/3)
[20899.790673] wlp3s0: authentication with a0:cf:5b:3c:9b:11 timed out
[20921.025621] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20924.197300] wlp3s0: authenticate with a0:cf:5b:3c:9e:31
[20924.202656] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 1/3)
[20924.405582] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 2/3)
[20924.609610] wlp3s0: direct probe to a0:cf:5b:3c:9e:31 (try 3/3)
[20924.811461] wlp3s0: authentication with a0:cf:5b:3c:9e:31 timed outjournalctl is too long to be attached but there doesn't seem to be anything specifically keyboard related.
Latest upgrade included xorg but a quick googling doesn't suggest anything that could be related.
Offline
I had the same issue. I fixed it by installing xf86-input-evdev rather than xf86-input-evdev-trackpoint from the aur. It is explained here https://bbs.archlinux.org/viewtopic.php?pid=1577999 in more detail.
Last edited by trevorg16 (2015-11-12 00:28:42)
Offline
Fixed, thanks.
Offline