You are not logged in.

Pages: 1

#1 2015-11-28 17:54:39

dacar139
Member
Registered: 2015-11-28
Posts: 6

de wont start after reinstall, nvidia-304xx

I just reinstalled arch and now I cant get the DE to load.
I wrote down everything I did last time and followed it exactly, Ive used arch as my only os for over a year now and have been using it on three different machines over the last couple years.

The setup on the computer that Im having problems on is
arch 64
cinnamon //I have also tried gnome, that crashes too
nvidia 304xx //GeForce 7100 / nForce 630i

I have not installed nouveau, but it lists driver (nvidia), kernal modules (nouveau, nvidia)


nvidia has been tested with and without nvidia-304xx-libgl, and the mesa libgl.
when done with the mesa ligbl it can sometimes boot to a "usable" desktop but is stuck in software rendering mode.

vesa is the only thing that is working.
nvidia, after startx will either load to a black screen with or without a mouse.. or it will load the desktop and then freeze.

I have noticed that the nvidia-304xx had some change to it within the last 6 days but I have no clue what Im doing, up untill this point everything has just worked.

any advice, solutions, ideas?

Offline

#2 2015-11-28 17:56:54

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,804

Re: de wont start after reinstall, nvidia-304xx

Welcome to Arch Linux.   Please post your Xorg.0.log file.   It is either in ~/.local/share/xorg or /var/log depending on how you started Xorg.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#3 2015-11-28 18:38:31

dacar139
Member
Registered: 2015-11-28
Posts: 6

Re: de wont start after reinstall, nvidia-304xx

ewaller wrote:

Welcome to Arch Linux.   Please post your Xorg.0.log file.   It is either in ~/.local/share/xorg or /var/log depending on how you started Xorg.

Thanks, here is my Xorg.0.log
Sorry for the delay, I had to reinstall everything again to generate it so tis a bit different. This one is with the nvidia-304xxlibgl, and the symptoms are a black screen that does nothing and requires a pressign the power button to restart.

*edit*
when startx is ran while loged in as root, x will load up and the screen will flash and then x closes out and goes back to the terminal.
when startx is ran while loged in as a normal user, x will load up, the screen will go black, and it will draw a mouse that I can controll but nothing else.
note, for normal user log, it says the monitor doesnt suport 3d vision but Ive been using this monitor for the better part of a year with no problem.
*/edit*

log from startx as root user

[   208.060] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[   208.074] X Protocol Version 11, Revision 0
[   208.079] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[   208.088] Current Operating System: Linux asdf-pc 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[   208.088] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aa858cc2-1b3d-4387-8efc-93d280f2be73 rw quiet
[   208.104] Build Date: 18 November 2015  08:07:09AM
[   208.108]  
[   208.113] Current version of pixman: 0.32.8
[   208.124] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   208.124] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   208.146] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 28 13:25:39 2015
[   208.152] (==) Using config file: "/etc/X11/xorg.conf"
[   208.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   208.169] (==) ServerLayout "X.org Configured"
[   208.169] (**) |-->Screen "Screen0" (0)
[   208.169] (**) |   |-->Monitor "Monitor0"
[   208.169] (**) |   |-->Device "Card0"
[   208.169] (**) |-->Input Device "Mouse0"
[   208.169] (**) |-->Input Device "Keyboard0"
[   208.169] (==) Automatically adding devices
[   208.169] (==) Automatically enabling devices
[   208.169] (==) Automatically adding GPU devices
[   208.169] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   208.169] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   208.169] 	Entry deleted from font path.
[   208.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   208.169] 	Entry deleted from font path.
[   208.169] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   208.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   208.169] 	Entry deleted from font path.
[   208.169] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   208.169] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   208.169] 	Entry deleted from font path.
[   208.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   208.169] 	Entry deleted from font path.
[   208.169] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   208.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   208.169] 	Entry deleted from font path.
[   208.169] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   208.169] (**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   208.169] (**) ModulePath set to "/usr/lib/xorg/modules"
[   208.170] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   208.170] (WW) Disabling Mouse0
[   208.170] (WW) Disabling Keyboard0
[   208.170] (II) Loader magic: 0x819d40
[   208.170] (II) Module ABI versions:
[   208.170] 	X.Org ANSI C Emulation: 0.4
[   208.170] 	X.Org Video Driver: 20.0
[   208.170] 	X.Org XInput driver : 22.1
[   208.170] 	X.Org Server Extension : 9.0
[   208.170] (++) using VT number 1

[   208.170] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   208.172] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   208.172] (II) xfree86: Adding drm device (/dev/dri/card0)
[   208.172] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   208.174] (--) PCI:*(0:0:16:0) 10de:07e1:1025:0137 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[   208.174] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   208.174] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   208.174] (II) LoadModule: "glx"
[   208.174] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   208.189] (II) Module glx: vendor="NVIDIA Corporation"
[   208.189] 	compiled for 4.0.2, module version = 1.0.0
[   208.189] 	Module class: X.Org Server Extension
[   208.189] (II) NVIDIA GLX Module  304.131  Sun Nov  8 22:03:20 PST 2015
[   208.189] (II) LoadModule: "nvidia"
[   208.189] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   208.190] (II) Module nvidia: vendor="NVIDIA Corporation"
[   208.190] 	compiled for 4.0.2, module version = 1.0.0
[   208.190] 	Module class: X.Org Video Driver
[   208.190] (II) NVIDIA dlloader X Driver  304.131  Sun Nov  8 21:45:02 PST 2015
[   208.190] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   208.190] (II) Loading sub module "fb"
[   208.190] (II) LoadModule: "fb"
[   208.190] (II) Loading /usr/lib/xorg/modules/libfb.so
[   208.190] (II) Module fb: vendor="X.Org Foundation"
[   208.190] 	compiled for 1.18.0, module version = 1.0.0
[   208.190] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   208.190] (II) Loading sub module "wfb"
[   208.190] (II) LoadModule: "wfb"
[   208.190] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   208.190] (II) Module wfb: vendor="X.Org Foundation"
[   208.190] 	compiled for 1.18.0, module version = 1.0.0
[   208.191] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   208.191] (II) Loading sub module "ramdac"
[   208.191] (II) LoadModule: "ramdac"
[   208.191] (II) Module "ramdac" already built-in
[   208.191] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   208.191] (==) NVIDIA(0): RGB weight 888
[   208.191] (==) NVIDIA(0): Default visual is TrueColor
[   208.191] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   208.191] (**) NVIDIA(0): Enabling 2D acceleration
[   208.814] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[   208.814] (II) NVIDIA(GPU-0):     Vision stereo.
[   208.815] (II) NVIDIA(0): NVIDIA GPU GeForce 7100 / nForce 630i (C73) at PCI:0:16:0
[   208.815] (II) NVIDIA(0):     (GPU-0)
[   208.815] (--) NVIDIA(0): Memory: 524288 kBytes
[   208.815] (--) NVIDIA(0): VideoBIOS: 05.73.32.11.07
[   208.815] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[   208.815] (--) NVIDIA(0): Valid display device(s) on GeForce 7100 / nForce 630i at PCI:0:16:0
[   208.815] (--) NVIDIA(0):     CRT-0
[   208.815] (--) NVIDIA(0):     DELL 1707FP (DFP-0) (connected)
[   208.815] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
[   208.815] (--) NVIDIA(0): DELL 1707FP (DFP-0): 165.0 MHz maximum pixel clock
[   208.815] (--) NVIDIA(0): DELL 1707FP (DFP-0): Internal Single Link TMDS
[   208.815] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   208.815] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[   208.815] (**) NVIDIA(0):     been enabled on all display devices.)
[   208.815] (==) NVIDIA(0): 
[   208.815] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   208.815] (==) NVIDIA(0):     will be used as the requested mode.
[   208.815] (==) NVIDIA(0): 
[   208.815] (II) NVIDIA(0): Validated MetaModes:
[   208.815] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[   208.815] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[   208.816] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[   208.828] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[   208.828] (--) NVIDIA(0):     option
[   208.828] (--) Depth 24 pixmap format is 32 bpp
[   208.831] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   208.831] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   208.831] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   208.831] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   208.831] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   208.831] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   208.831] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   208.831] (II) NVIDIA(0):     Config Options in the README.
[   208.832] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[   208.996] (==) NVIDIA(0): Disabling shared memory pixmaps
[   208.996] (==) NVIDIA(0): Backing store enabled
[   208.996] (==) NVIDIA(0): Silken mouse enabled
[   208.996] (==) NVIDIA(0): DPMS enabled
[   208.997] (II) Loading sub module "dri2"
[   208.997] (II) LoadModule: "dri2"
[   208.997] (II) Module "dri2" already built-in
[   208.997] (II) NVIDIA(0): [DRI2] Setup complete
[   208.997] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   208.997] (--) RandR disabled
[   209.001] (II) Initializing extension GLX
[   209.001] (II) Indirect GLX disabled.(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[   209.053] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   209.053] (II) LoadModule: "evdev"
[   209.053] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   209.054] (II) Module evdev: vendor="X.Org Foundation"
[   209.054] 	compiled for 1.18.0, module version = 2.10.0
[   209.054] 	Module class: X.Org XInput Driver
[   209.054] 	ABI class: X.Org XInput driver, version 22.1
[   209.055] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[   209.055] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   209.055] (**) Logitech USB Keyboard: always reports core events
[   209.055] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[   209.055] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   209.055] (--) evdev: Logitech USB Keyboard: Found keys
[   209.055] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   209.055] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0002/input/input0/event0"
[   209.055] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 6)
[   209.055] (**) Option "xkb_rules" "evdev"
[   209.056] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[   209.056] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   209.056] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[   209.056] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   209.056] (**) Logitech USB Keyboard: always reports core events
[   209.056] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[   209.056] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   209.056] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   209.056] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   209.056] (--) evdev: Logitech USB Keyboard: Found keys
[   209.056] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   209.056] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   209.056] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   209.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0003/input/input1/event1"
[   209.056] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 7)
[   209.056] (**) Option "xkb_rules" "evdev"
[   209.056] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   209.057] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   209.057] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   209.057] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   209.057] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   209.057] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event10)
[   209.057] (II) No input driver specified, ignoring this device.
[   209.057] (II) This device may have been added with another device file.
[   209.057] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event11)
[   209.057] (II) No input driver specified, ignoring this device.
[   209.057] (II) This device may have been added with another device file.
[   209.058] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 Phantom (/dev/input/event12)
[   209.058] (II) No input driver specified, ignoring this device.
[   209.058] (II) This device may have been added with another device file.
[   209.058] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[   209.058] (II) No input driver specified, ignoring this device.
[   209.058] (II) This device may have been added with another device file.
[   209.058] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[   209.058] (II) No input driver specified, ignoring this device.
[   209.058] (II) This device may have been added with another device file.
[   209.059] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[   209.059] (II) No input driver specified, ignoring this device.
[   209.059] (II) This device may have been added with another device file.
[   209.059] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[   209.059] (II) No input driver specified, ignoring this device.
[   209.059] (II) This device may have been added with another device file.
[   209.059] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event7)
[   209.059] (II) No input driver specified, ignoring this device.
[   209.059] (II) This device may have been added with another device file.
[   209.060] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event8)
[   209.060] (II) No input driver specified, ignoring this device.
[   209.060] (II) This device may have been added with another device file.
[   209.060] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event9)
[   209.060] (II) No input driver specified, ignoring this device.
[   209.060] (II) This device may have been added with another device file.
[   209.061] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[   209.061] (II) No input driver specified, ignoring this device.
[   209.061] (II) This device may have been added with another device file.
[   209.135] (II) evdev: Logitech USB Keyboard: Close
[   209.135] (II) UnloadModule: "evdev"
[   209.135] (II) systemd-logind: releasing fd for 13:65
[   209.164] (II) evdev: Logitech USB Keyboard: Close
[   209.164] (II) UnloadModule: "evdev"
[   209.164] (II) systemd-logind: releasing fd for 13:64
[   209.332] (II) Server terminated successfully (0). Closing log file.

log from startx as a normal user

[  1309.522] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[  1309.523] X Protocol Version 11, Revision 0
[  1309.523] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[  1309.523] Current Operating System: Linux asdf-pc 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[  1309.523] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aa858cc2-1b3d-4387-8efc-93d280f2be73 rw quiet
[  1309.524] Build Date: 18 November 2015  08:07:09AM
[  1309.524]  
[  1309.524] Current version of pixman: 0.32.8
[  1309.525]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[  1309.525] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1309.526] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 28 13:44:00 2015
[  1309.526] (==) Using config file: "/etc/X11/xorg.conf"
[  1309.532] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1309.532] (==) ServerLayout "X.org Configured"
[  1309.532] (**) |-->Screen "Screen0" (0)
[  1309.532] (**) |   |-->Monitor "Monitor0"
[  1309.532] (**) |   |-->Device "Card0"
[  1309.532] (**) |-->Input Device "Mouse0"
[  1309.532] (**) |-->Input Device "Keyboard0"
[  1309.532] (==) Automatically adding devices
[  1309.532] (==) Automatically enabling devices
[  1309.532] (==) Automatically adding GPU devices
[  1309.532] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1309.532] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1309.532]     Entry deleted from font path.
[  1309.532] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1309.532]     Entry deleted from font path.
[  1309.532]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1309.532] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1309.532]     Entry deleted from font path.
[  1309.532]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1309.532] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1309.532]     Entry deleted from font path.
[  1309.532] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1309.532]     Entry deleted from font path.
[  1309.532]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1309.532] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1309.532]     Entry deleted from font path.
[  1309.532]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1309.532] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
[  1309.532] (**) ModulePath set to "/usr/lib/xorg/modules"
[  1309.532] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1309.532] (WW) Disabling Mouse0
[  1309.532] (WW) Disabling Keyboard0
[  1309.532] (II) Loader magic: 0x819d40
[  1309.532] (II) Module ABI versions:
[  1309.532]     X.Org ANSI C Emulation: 0.4
[  1309.532]     X.Org Video Driver: 20.0
[  1309.532]     X.Org XInput driver : 22.1
[  1309.532]     X.Org Server Extension : 9.0
[  1309.533] (++) using VT number 1

[  1309.533] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1309.534] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c7
[  1309.534] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1309.535] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  1309.537] (--) PCI:*(0:0:16:0) 10de:07e1:1025:0137 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[  1309.537] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1309.537] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1309.537] (II) LoadModule: "glx"
[  1309.537] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1309.552] (II) Module glx: vendor="NVIDIA Corporation"
[  1309.552]     compiled for 4.0.2, module version = 1.0.0
[  1309.552]     Module class: X.Org Server Extension
[  1309.552] (II) NVIDIA GLX Module  304.131  Sun Nov  8 22:03:20 PST 2015
[  1309.552] (II) LoadModule: "nvidia"
[  1309.552] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1309.552] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1309.552]     compiled for 4.0.2, module version = 1.0.0
[  1309.552]     Module class: X.Org Video Driver
[  1309.552] (II) NVIDIA dlloader X Driver  304.131  Sun Nov  8 21:45:02 PST 2015
[  1309.552] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1309.553] (II) Loading sub module "fb"
[  1309.553] (II) LoadModule: "fb"
[  1309.553] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1309.553] (II) Module fb: vendor="X.Org Foundation"
[  1309.553]     compiled for 1.18.0, module version = 1.0.0
[  1309.553]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1309.553] (II) Loading sub module "wfb"
[  1309.553] (II) LoadModule: "wfb"
[  1309.553] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1309.553] (II) Module wfb: vendor="X.Org Foundation"
[  1309.553]     compiled for 1.18.0, module version = 1.0.0
[  1309.553]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1309.553] (II) Loading sub module "ramdac"
[  1309.553] (II) LoadModule: "ramdac"
[  1309.553] (II) Module "ramdac" already built-in
[  1309.553] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1309.553] (==) NVIDIA(0): RGB weight 888
[  1309.553] (==) NVIDIA(0): Default visual is TrueColor
[  1309.553] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1309.553] (**) NVIDIA(0): Enabling 2D acceleration
[  1309.839] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1309.839] (II) NVIDIA(GPU-0):     Vision stereo.
[  1309.840] (II) NVIDIA(0): NVIDIA GPU GeForce 7100 / nForce 630i (C73) at PCI:0:16:0
[  1309.840] (II) NVIDIA(0):     (GPU-0)
[  1309.840] (--) NVIDIA(0): Memory: 524288 kBytes
[  1309.840] (--) NVIDIA(0): VideoBIOS: 05.73.32.11.07
[  1309.840] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  1309.840] (--) NVIDIA(0): Valid display device(s) on GeForce 7100 / nForce 630i at PCI:0:16:0
[  1309.840] (--) NVIDIA(0):     CRT-0
[  1309.840] (--) NVIDIA(0):     DELL 1707FP (DFP-0) (connected)
[  1309.840] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
[  1309.840] (--) NVIDIA(0): DELL 1707FP (DFP-0): 165.0 MHz maximum pixel clock
[  1309.840] (--) NVIDIA(0): DELL 1707FP (DFP-0): Internal Single Link TMDS
[  1309.840] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1309.840] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1309.840] (**) NVIDIA(0):     been enabled on all display devices.)
[  1309.840] (==) NVIDIA(0): 
[  1309.840] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1309.840] (==) NVIDIA(0):     will be used as the requested mode.
[  1309.840] (==) NVIDIA(0): 
[  1309.840] (II) NVIDIA(0): Validated MetaModes:
[  1309.840] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[  1309.840] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[  1309.841] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[  1309.841] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[  1309.841] (--) NVIDIA(0):     option
[  1309.841] (--) Depth 24 pixmap format is 32 bpp
[  1309.845] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1309.845] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1309.845] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1309.845] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1309.845] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1309.845] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1309.845] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1309.845] (II) NVIDIA(0):     Config Options in the README.
[  1309.845] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  1309.999] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1309.999] (==) NVIDIA(0): Backing store enabled
[  1309.999] (==) NVIDIA(0): Silken mouse enabled
[  1309.999] (==) NVIDIA(0): DPMS enabled
[  1309.999] (II) Loading sub module "dri2"
[  1309.999] (II) LoadModule: "dri2"
[  1309.999] (II) Module "dri2" already built-in
[  1309.999] (II) NVIDIA(0): [DRI2] Setup complete
[  1309.999] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1309.999] (--) RandR disabled
[  1310.004] (II) Initializing extension GLX
[  1310.004] (II) Indirect GLX disabled.(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[  1310.053] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1310.053] (II) LoadModule: "evdev"
[  1310.053] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1310.053] (II) Module evdev: vendor="X.Org Foundation"
[  1310.053]     compiled for 1.18.0, module version = 2.10.0
[  1310.053]     Module class: X.Org XInput Driver
[  1310.053]     ABI class: X.Org XInput driver, version 22.1
[  1310.054] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[  1310.054] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[  1310.054] (**) Logitech USB Keyboard: always reports core events
[  1310.054] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[  1310.054] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[  1310.054] (--) evdev: Logitech USB Keyboard: Found keys
[  1310.054] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[  1310.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0006/input/input15/event0"
[  1310.054] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 6)
[  1310.054] (**) Option "xkb_rules" "evdev"
[  1310.055] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[  1310.055] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1310.055] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[  1310.055] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[  1310.055] (**) Logitech USB Keyboard: always reports core events
[  1310.055] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[  1310.056] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[  1310.056] (--) evdev: Logitech USB Keyboard: Found absolute axes
[  1310.056] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[  1310.056] (--) evdev: Logitech USB Keyboard: Found keys
[  1310.056] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[  1310.056] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[  1310.056] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[  1310.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0007/input/input16/event1"
[  1310.056] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 7)
[  1310.056] (**) Option "xkb_rules" "evdev"
[  1310.056] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[  1310.056] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[  1310.056] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[  1310.056] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[  1310.056] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[  1310.056] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event10)
[  1310.056] (II) No input driver specified, ignoring this device.
[  1310.056] (II) This device may have been added with another device file.
[  1310.057] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event11)
[  1310.057] (II) No input driver specified, ignoring this device.
[  1310.057] (II) This device may have been added with another device file.
[  1310.057] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 Phantom (/dev/input/event12)
[  1310.057] (II) No input driver specified, ignoring this device.
[  1310.057] (II) This device may have been added with another device file.
[  1310.057] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[  1310.057] (II) No input driver specified, ignoring this device.
[  1310.057] (II) This device may have been added with another device file.
[  1310.058] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[  1310.058] (II) No input driver specified, ignoring this device.
[  1310.058] (II) This device may have been added with another device file.
[  1310.058] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[  1310.058] (II) No input driver specified, ignoring this device.
[  1310.058] (II) This device may have been added with another device file.
[  1310.058] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[  1310.058] (II) No input driver specified, ignoring this device.
[  1310.058] (II) This device may have been added with another device file.
[  1310.059] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event7)
[  1310.059] (II) No input driver specified, ignoring this device.
[  1310.059] (II) This device may have been added with another device file.
[  1310.059] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event8)
[  1310.059] (II) No input driver specified, ignoring this device.
[  1310.059] (II) This device may have been added with another device file.
[  1310.059] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event9)
[  1310.059] (II) No input driver specified, ignoring this device.
[  1310.059] (II) This device may have been added with another device file.
[  1310.060] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[  1310.060] (II) No input driver specified, ignoring this device.
[  1310.060] (II) This device may have been added with another device file.
[  1310.320] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1310.320] (II) NVIDIA(GPU-0):     Vision stereo.
[  1310.320] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1310.320] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1310.320] (**) NVIDIA(0):     been enabled on all display devices.)
[  1310.897] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1310.897] (II) NVIDIA(GPU-0):     Vision stereo.
[  1310.897] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1310.897] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1310.897] (**) NVIDIA(0):     been enabled on all display devices.)
[  1311.556] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1311.557] (II) NVIDIA(GPU-0):     Vision stereo.
[  1311.557] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1311.557] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1311.557] (**) NVIDIA(0):     been enabled on all display devices.)
[  1311.599] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1311.599] (II) NVIDIA(GPU-0):     Vision stereo.
[  1311.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1311.599] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1311.599] (**) NVIDIA(0):     been enabled on all display devices.)
[  1332.094] (II) NVIDIA(GPU-0): Display (DELL 1707FP (DFP-0)) does not support NVIDIA 3D
[  1332.094] (II) NVIDIA(GPU-0):     Vision stereo.
[  1332.094] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1332.094] (**) NVIDIA(0):     device DELL 1707FP (DFP-0) (Using EDID frequencies has
[  1332.094] (**) NVIDIA(0):     been enabled on all display devices.)
[  1333.307] (II) config/udev: removing device Logitech USB Keyboard
[  1333.308] (II) evdev: Logitech USB Keyboard: Close
[  1333.309] (II) UnloadModule: "evdev"
[  1333.309] (II) systemd-logind: releasing fd for 13:64
[  1333.334] (II) config/udev: removing device Logitech USB Keyboard
[  1333.335] (II) evdev: Logitech USB Keyboard: Close
[  1333.336] (II) UnloadModule: "evdev"
[  1333.336] (II) systemd-logind: releasing fd for 13:65

Last edited by dacar139 (2015-11-28 18:56:12)

Offline

#4 2015-11-28 18:49:22

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,600
Website

Re: de wont start after reinstall, nvidia-304xx

I don't see any EE (error) lines in there... post:

dmesg | grep -i 'error\|warn\|exception'

And

dmesg | grep -i nvidia

CPU-optimized Linux-ck packages @ Repo-ck  • AUR packages • Zsh and other configs

Offline

#5 2015-11-28 19:06:17

dacar139
Member
Registered: 2015-11-28
Posts: 6

Re: de wont start after reinstall, nvidia-304xx

graysky wrote:

I don't see any EE (error) lines in there... post:

dmesg | grep -i 'error\|warn\|exception'

And

dmesg | grep -i nvidia

I updated a post I made above yours with an alternate xorg log

note, it mentions bois and acpi.. I always get acpi and ascpi/whatever mixed up but to run linux I have to go into the bois and disable it.. its always been like that and never been a probelm, if its the power option in the bois this problem comes from a windows based bois and didnt affect the system at all expcept for software not being able to power down the computer.

dmesg | grep -i 'error\|warn\|exception'

[    0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150619/tbxfroot-243)
[   13.382385] ACPI Exception: AE_BAD_PARAMETER, Thread 2836663424 could not acquire Mutex [0x1] (20150619/utmutex-285)
[   13.382447] ACPI Exception: AE_BAD_PARAMETER, Thread 2836663424 could not acquire Mutex [0x1] (20150619/utmutex-285)
[   40.654061] EXT4-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended

dmesg | grep -i nvidia

[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] MPTABLE: OEM ID: nVidia  
[   14.067693] nvidia: module license 'NVIDIA' taints kernel.
[   14.134820] nvidia 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 10
[   14.135557] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:00:10.0 on minor 0
[   14.135570] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.131  Sun Nov  8 21:43:33 PST 2015
[   15.985248] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input4
[   15.985323] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input5
[   15.985395] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input6
[   15.985466] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input7
[   15.985537] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
[   15.985607] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
[   15.985680] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input10
[   15.985749] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input11
[   15.985821] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:09.0/sound/card0/input12

Offline

#6 2015-11-28 19:43:58

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,804

Re: de wont start after reinstall, nvidia-304xx

Sadly, I don't use Cinnamon or nVidia.  But, it sounds to me like the problem is not X.   Let's back up a couple steps.  How are you staring X?  Do you have an ~/.xinitrc file?

I would like to see if we can get twm to run.  So, with no .xinitrc in your $HOME directory, and with xterm, xorg-xinit and xorg-xclock installed, just run startx from the console as your user.  If you get a screen with three terminals and a clock, that is good.  We can move on after establishing that baseline.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#7 2015-11-28 20:04:57

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,600
Website

Re: de wont start after reinstall, nvidia-304xx

Agreed with ewaller.  Can you try an alternative greeter to rule out a config issue or do as suggested in post #6.

CPU-optimized Linux-ck packages @ Repo-ck  • AUR packages • Zsh and other configs

Offline

#8 2015-11-28 20:22:57

dacar139
Member
Registered: 2015-11-28
Posts: 6

Re: de wont start after reinstall, nvidia-304xx

ewaller wrote:

Sadly, I don't use Cinnamon or nVidia.  But, it sounds to me like the problem is not X.   Let's back up a couple steps.  How are you staring X?  Do you have an ~/.xinitrc file?

I would like to see if we can get twm to run.  So, with no .xinitrc in your $HOME directory, and with xterm, xorg-xinit and xorg-xclock installed, just run startx from the console as your user.  If you get a screen with three terminals and a clock, that is good.  We can move on after establishing that baseline.

yes, I use startx to start everything, my .xinitrc file has "exec cinnamon-session" in it, and when I tired gnome I switched to to "exec gnome-session" or whatever it said to on the arch gnome wiki.

as a normal user I deleted .xinitrc from my home folder, entered startx and the screen just flashed. I ran pacman -Rs *everything I use to install X, video card, cinnamon, and lxterminal*, then pacman -S *everything that was there before* and now Im waiting at the screen with three terminals and a clock.

what next?

Offline

#9 2015-11-28 20:35:03

dacar139
Member
Registered: 2015-11-28
Posts: 6

Re: de wont start after reinstall, nvidia-304xx

graysky wrote:

Agreed with ewaller.  Can you try an alternative greeter to rule out a config issue or do as suggested in post #6.

Yea, Ill try whatever is suggested. This is a clean install so Ive got literally nothing to loose but time and Ive allready wasted enough of that over the course of the last two days trying everything from installing different dependancys to trying to remake the nvidia-304xx package from last month. -problem with that last one is makepkg just loops over sourcecode some code that didnt do with the first two packages.. thinking the linux headers are the wrong ones and can't find that so I decided instead of chasing ghosts Id come here and ask if for help.. so yea, Im not about to turn anything down or be stubborn.

Offline

#10 2015-11-28 20:48:41

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,804

Re: de wont start after reinstall, nvidia-304xx

Okay, that is good.   First X would not start twm, then you installed something you need (not sure what) and now X runs.  Kill all three of those terminals (just type Ctrl-D when selected) .
Then restore your .xinitrc to run cinnamon and try again.

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#11 2015-11-28 21:10:39

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: de wont start after reinstall, nvidia-304xx

Not an Installation issue, moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#12 2015-11-29 00:13:36

dacar139
Member
Registered: 2015-11-28
Posts: 6

Re: de wont start after reinstall, nvidia-304xx

ewaller wrote:

Okay, that is good.   First X would not start twm, then you installed something you need (not sure what) and now X runs.  Kill all three of those terminals (just type Ctrl-D when selected) .
Then restore your .xinitrc to run cinnamon and try again.

made ~./xinitrc, ran startx, screen went black, have nothing but a mouse like stated in the original problem.

Offline

Pages: 1

Board footer

Powered by FluxBB