You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2015-11-29 12:46:14
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Gnome does not start on fresh Arch install
Got a pre-production Skylake notebook for a few days with an i915 and an nvidia card so I quickly installed Arch on it to see how compatible it is. The quadro M1000M doesn't really work at all but using only the Intel card XFCE starts fine with the provided startxfce4 script and also seems to work flawlessly (though appearently lacking even 2D acceleration).
Gnome however fails to start either using the `exec gnome-session` way from xinitrc or by starting gdm from systemd. Both methods end up with the same "Oh no something has gone wrong" dialog and then Xorg quits on me. Where should I look for logs with any related information? Journalctl did not really have anything useful, gdm's error log is completely empty. Any hints?
Offline
#2 2015-11-29 13:12:50
- Fuxino
- Member
- From: Slovakia
- Registered: 2014-09-26
- Posts: 185
Re: Gnome does not start on fresh Arch install
Post your Xorg log (should be ~/.local/share/xorg/Xorg.0.log)
Offline
#3 2015-11-29 13:36:37
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Re: Gnome does not start on fresh Arch install
[ 18.240]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 18.240] X Protocol Version 11, Revision 0
[ 18.240] Build Operating System: Linux 4.2.3-1-ARCH x86_64
[ 18.240] Current Operating System: Linux zbook 4.3.0-1-ARCH #1 SMP PREEMPT Mon Nov 2 16:52:35 CET 2015 x86_64
[ 18.240] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw i915.preliminary_hw_support=1 initrd=../initramfs-linux.img
[ 18.241] Build Date: 18 November 2015 08:07:09AM
[ 18.241]
[ 18.241] Current version of pixman: 0.32.8
[ 18.241] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.241] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.241] (==) Log file: "/home/kjozsa/.local/share/xorg/Xorg.0.log", Time: Sun Nov 29 14:30:42 2015
[ 18.245] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.246] (==) No Layout section. Using the first Screen section.
[ 18.246] (==) No screen section available. Using defaults.
[ 18.246] (**) |-->Screen "Default Screen Section" (0)
[ 18.246] (**) | |-->Monitor "<default monitor>"
[ 18.247] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.247] (==) Automatically adding devices
[ 18.247] (==) Automatically enabling devices
[ 18.247] (==) Automatically adding GPU devices
[ 18.247] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.253] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.253] Entry deleted from font path.
[ 18.253] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.253] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.253] Entry deleted from font path.
[ 18.253] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.253] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 18.253] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.253] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.253] (II) Loader magic: 0x819d40
[ 18.253] (II) Module ABI versions:
[ 18.253] X.Org ANSI C Emulation: 0.4
[ 18.253] X.Org Video Driver: 20.0
[ 18.253] X.Org XInput driver : 22.1
[ 18.253] X.Org Server Extension : 9.0
[ 18.254] (++) using VT number 1
[ 18.254] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.257] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.259] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.260] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.481] (--) PCI:*(0:0:2:0) 8086:191b:103c:80d4 rev 6, Mem @ 0xe3000000/16777216, 0x40000000/268435456, I/O @ 0x00006000/64
[ 18.481] (--) PCI: (0:1:0:0) 10de:13b1:103c:80d4 rev 162, Mem @ 0xe4000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 18.481] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.481] (II) LoadModule: "glx"
[ 18.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.549] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.549] compiled for 4.0.2, module version = 1.0.0
[ 18.549] Module class: X.Org Server Extension
[ 18.550] (II) NVIDIA GLX Module 358.16 Mon Nov 16 18:54:01 PST 2015
[ 18.550] (==) Matched intel as autoconfigured driver 0
[ 18.550] (==) Matched intel as autoconfigured driver 1
[ 18.550] (==) Matched modesetting as autoconfigured driver 2
[ 18.550] (==) Matched fbdev as autoconfigured driver 3
[ 18.550] (==) Matched vesa as autoconfigured driver 4
[ 18.550] (==) Assigned the driver to the xf86ConfigLayout
[ 18.550] (II) LoadModule: "intel"
[ 18.551] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.554] (II) Module intel: vendor="X.Org Foundation"
[ 18.554] compiled for 1.18.0, module version = 2.99.917
[ 18.554] Module class: X.Org Video Driver
[ 18.554] ABI class: X.Org Video Driver, version 20.0
[ 18.554] (II) LoadModule: "modesetting"
[ 18.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.555] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.555] compiled for 1.18.0, module version = 1.18.0
[ 18.555] Module class: X.Org Video Driver
[ 18.555] ABI class: X.Org Video Driver, version 20.0
[ 18.555] (II) LoadModule: "fbdev"
[ 18.556] (WW) Warning, couldn't open module fbdev
[ 18.556] (II) UnloadModule: "fbdev"
[ 18.556] (II) Unloading fbdev
[ 18.556] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.556] (II) LoadModule: "vesa"
[ 18.556] (WW) Warning, couldn't open module vesa
[ 18.556] (II) UnloadModule: "vesa"
[ 18.556] (II) Unloading vesa
[ 18.556] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.556] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 18.556] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 18.556] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 18.556] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 18.556] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.557] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 18.557] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
[ 18.557] (II) intel(0): SNA compiled from 2.99.917-478-gdf72bc5
[ 18.559] (WW) Falling back to old probe method for modesetting
[ 18.559] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 18.560] (--) intel(0): gen9 engineering sample
[ 18.560] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 18.560] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.560] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.560] (==) intel(0): RGB weight 888
[ 18.560] (==) intel(0): Default visual is TrueColor
[ 18.561] (II) intel(0): Output eDP1 has no monitor section
[ 18.580] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 18.580] (II) intel(0): Enabled output eDP1
[ 18.580] (II) intel(0): Output DP1 has no monitor section
[ 18.580] (II) intel(0): Enabled output DP1
[ 18.580] (II) intel(0): Output HDMI1 has no monitor section
[ 18.580] (II) intel(0): Enabled output HDMI1
[ 18.580] (II) intel(0): Output DP2 has no monitor section
[ 18.580] (II) intel(0): Enabled output DP2
[ 18.580] (II) intel(0): Output HDMI2 has no monitor section
[ 18.580] (II) intel(0): Enabled output HDMI2
[ 18.580] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 18.580] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 18.580] (II) intel(0): Enabled output VIRTUAL1
[ 18.580] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 18.581] (==) intel(0): TearFree disabled
[ 18.581] (==) intel(0): DPI set to (96, 96)
[ 18.581] (II) Loading sub module "dri2"
[ 18.581] (II) LoadModule: "dri2"
[ 18.581] (II) Module "dri2" already built-in
[ 18.581] (II) Loading sub module "present"
[ 18.581] (II) LoadModule: "present"
[ 18.581] (II) Module "present" already built-in
[ 18.581] (II) UnloadModule: "modesetting"
[ 18.581] (II) Unloading modesetting
[ 18.581] (==) Depth 24 pixmap format is 32 bpp
[ 18.584] (II) intel(0): SNA initialized with generic backend
[ 18.584] (==) intel(0): Backing store enabled
[ 18.584] (==) intel(0): Silken mouse enabled
[ 18.584] (II) intel(0): HW Cursor enabled
[ 18.584] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.585] (==) intel(0): DPMS enabled
[ 18.585] (==) intel(0): Display hotplug detection enabled
[ 18.585] (II) intel(0): Textured video not supported on this hardware or backend
[ 18.586] (II) intel(0): [DRI2] Setup complete
[ 18.586] (II) intel(0): [DRI2] DRI driver: i965
[ 18.586] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 18.586] (II) intel(0): direct rendering: DRI2 enabled
[ 18.586] (II) intel(0): hardware support for Present enabled
[ 18.586] (--) RandR disabled
[ 18.598] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 18.603] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 18.603] (II) intel(0): Setting screen physical size to 508 x 285
[ 18.666] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.666] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.666] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 18.666] (II) LoadModule: "libinput"
[ 18.666] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 18.672] (II) Module libinput: vendor="X.Org Foundation"
[ 18.672] compiled for 1.18.0, module version = 0.15.0
[ 18.672] Module class: X.Org XInput Driver
[ 18.673] ABI class: X.Org XInput driver, version 22.1
[ 18.673] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[ 18.673] (II) Using input driver 'libinput' for 'Power Button'
[ 18.673] (**) Power Button: always reports core events
[ 18.673] (**) Option "Device" "/dev/input/event3"
[ 18.674] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 18.674] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 18.674] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 18.674] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.674] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 18.674] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 18.675] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 18.675] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.675] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 18.676] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 15 paused 0
[ 18.676] (II) Using input driver 'libinput' for 'Video Bus'
[ 18.676] (**) Video Bus: always reports core events
[ 18.676] (**) Option "Device" "/dev/input/event13"
[ 18.676] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[ 18.676] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[ 18.676] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20/event13"
[ 18.676] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 18.677] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[ 18.677] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[ 18.677] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 18.677] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.677] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 18.678] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 16 paused 0
[ 18.678] (II) Using input driver 'libinput' for 'Video Bus'
[ 18.678] (**) Video Bus: always reports core events
[ 18.678] (**) Option "Device" "/dev/input/event9"
[ 18.678] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 18.678] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 18.678] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input16/event9"
[ 18.678] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 18.679] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 18.679] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 18.679] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 18.679] (II) No input driver specified, ignoring this device.
[ 18.679] (II) This device may have been added with another device file.
[ 18.680] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 18.680] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 18.680] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 18.681] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[ 18.681] (II) Using input driver 'libinput' for 'Sleep Button'
[ 18.681] (**) Sleep Button: always reports core events
[ 18.681] (**) Option "Device" "/dev/input/event1"
[ 18.681] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 18.681] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 18.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1"
[ 18.681] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 18.682] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 18.682] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 18.682] (II) config/udev: Adding input device HP HD Camera (/dev/input/event6)
[ 18.682] (**) HP HD Camera: Applying InputClass "evdev keyboard catchall"
[ 18.682] (**) HP HD Camera: Applying InputClass "libinput keyboard catchall"
[ 18.683] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 18 paused 0
[ 18.683] (II) Using input driver 'libinput' for 'HP HD Camera'
[ 18.683] (**) HP HD Camera: always reports core events
[ 18.683] (**) Option "Device" "/dev/input/event6"
[ 18.684] (II) input device 'HP HD Camera', /dev/input/event6 is tagged by udev as: Keyboard
[ 18.684] (II) input device 'HP HD Camera', /dev/input/event6 is a keyboard
[ 18.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input13/event6"
[ 18.684] (II) XINPUT: Adding extended input device "HP HD Camera" (type: KEYBOARD, id 10)
[ 18.684] (II) input device 'HP HD Camera', /dev/input/event6 is tagged by udev as: Keyboard
[ 18.684] (II) input device 'HP HD Camera', /dev/input/event6 is a keyboard
[ 18.685] (II) config/udev: Adding input device ALP0011:00 044E:120C (/dev/input/event8)
[ 18.685] (**) ALP0011:00 044E:120C: Applying InputClass "evdev pointer catchall"
[ 18.685] (**) ALP0011:00 044E:120C: Applying InputClass "libinput pointer catchall"
[ 18.787] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 19 paused 0
[ 18.787] (II) Using input driver 'libinput' for 'ALP0011:00 044E:120C'
[ 18.787] (**) ALP0011:00 044E:120C: always reports core events
[ 18.787] (**) Option "Device" "/dev/input/event8"
[ 18.788] (II) input device 'ALP0011:00 044E:120C', /dev/input/event8 is tagged by udev as: Mouse
[ 18.788] (II) input device 'ALP0011:00 044E:120C', /dev/input/event8 is a pointer caps
[ 18.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ALP0011:00/0018:044E:120C.0001/input/input15/event8"
[ 18.788] (II) XINPUT: Adding extended input device "ALP0011:00 044E:120C" (type: MOUSE, id 11)
[ 18.789] (**) Option "AccelerationScheme" "none"
[ 18.789] (**) ALP0011:00 044E:120C: (accel) selected scheme none/0
[ 18.789] (**) ALP0011:00 044E:120C: (accel) acceleration factor: 2.000
[ 18.789] (**) ALP0011:00 044E:120C: (accel) acceleration threshold: 4
[ 18.789] (II) input device 'ALP0011:00 044E:120C', /dev/input/event8 is tagged by udev as: Mouse
[ 18.790] (II) input device 'ALP0011:00 044E:120C', /dev/input/event8 is a pointer caps
[ 18.790] (II) config/udev: Adding input device ALP0011:00 044E:120C (/dev/input/mouse0)
[ 18.790] (II) No input driver specified, ignoring this device.
[ 18.790] (II) This device may have been added with another device file.
[ 18.791] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[ 18.791] (II) No input driver specified, ignoring this device.
[ 18.791] (II) This device may have been added with another device file.
[ 18.792] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 18.792] (II) No input driver specified, ignoring this device.
[ 18.792] (II) This device may have been added with another device file.
[ 18.793] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 18.793] (II) No input driver specified, ignoring this device.
[ 18.793] (II) This device may have been added with another device file.
[ 18.793] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[ 18.793] (II) No input driver specified, ignoring this device.
[ 18.793] (II) This device may have been added with another device file.
[ 18.794] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[ 18.794] (II) No input driver specified, ignoring this device.
[ 18.794] (II) This device may have been added with another device file.
[ 18.794] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[ 18.794] (II) No input driver specified, ignoring this device.
[ 18.794] (II) This device may have been added with another device file.
[ 18.795] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.795] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.795] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 18.796] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[ 18.796] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 18.797] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.797] (**) Option "Device" "/dev/input/event0"
[ 18.797] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 18.797] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 18.797] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.797] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 18.798] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 18.798] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 18.799] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event11)
[ 18.799] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 18.799] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 18.799] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 18.799] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[ 18.800] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 21 paused 0
[ 18.800] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 18.800] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 18.800] (**) Option "Device" "/dev/input/event11"
[ 18.801] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event11 is tagged by udev as: Touchpad
[ 18.801] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event11 is a touchpad
[ 18.801] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event11"
[ 18.801] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 13)
[ 18.801] (**) Option "AccelerationScheme" "none"
[ 18.801] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[ 18.801] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 18.801] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 18.802] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event11 is tagged by udev as: Touchpad
[ 18.802] (II) input device 'AlpsPS/2 ALPS DualPoint TouchPad', /dev/input/event11 is a touchpad
[ 18.803] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 18.803] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 18.804] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event10)
[ 18.804] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 18.804] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[ 18.805] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 22 paused 0
[ 18.805] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 18.805] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 18.805] (**) Option "Device" "/dev/input/event10"
[ 18.805] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event10 is tagged by udev as: Mouse Pointingstick
[ 18.805] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event10 is a pointer caps
[ 18.805] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input17/event10"
[ 18.805] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 14)
[ 18.806] (**) Option "AccelerationScheme" "none"
[ 18.806] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 18.806] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 18.806] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 18.806] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event10 is tagged by udev as: Mouse Pointingstick
[ 18.806] (II) input device 'AlpsPS/2 ALPS DualPoint Stick', /dev/input/event10 is a pointer caps
[ 18.807] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[ 18.807] (II) No input driver specified, ignoring this device.
[ 18.807] (II) This device may have been added with another device file.
[ 18.808] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event12)
[ 18.808] (II) No input driver specified, ignoring this device.
[ 18.808] (II) This device may have been added with another device file.
[ 18.808] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 18.808] (II) No input driver specified, ignoring this device.
[ 18.808] (II) This device may have been added with another device file.
[ 18.809] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 18.809] (II) No input driver specified, ignoring this device.
[ 18.809] (II) This device may have been added with another device file.
[ 18.810] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 18.810] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.810] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 18.811] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 23 paused 0
[ 18.811] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 18.811] (**) HP WMI hotkeys: always reports core events
[ 18.811] (**) Option "Device" "/dev/input/event7"
[ 18.811] (II) input device 'HP WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[ 18.811] (II) input device 'HP WMI hotkeys', /dev/input/event7 is a keyboard
[ 18.811] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event7"
[ 18.811] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 18.812] (II) input device 'HP WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[ 18.812] (II) input device 'HP WMI hotkeys', /dev/input/event7 is a keyboard
[ 18.813] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[ 18.813] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.813] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 18.814] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
[ 18.814] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[ 18.814] (**) HP Wireless hotkeys: always reports core events
[ 18.814] (**) Option "Device" "/dev/input/event4"
[ 18.814] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[ 18.814] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is a keyboard
[ 18.814] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event4"
[ 18.814] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 16)
[ 18.815] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[ 18.815] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is a keyboard
[ 18.845] (**) Option "fd" "12"
[ 18.845] (**) Option "fd" "15"
[ 18.845] (**) Option "fd" "16"
[ 18.845] (**) Option "fd" "17"
[ 18.845] (**) Option "fd" "18"
[ 18.845] (**) Option "fd" "19"
[ 18.845] (**) Option "fd" "20"
[ 18.845] (**) Option "fd" "21"
[ 18.845] (**) Option "fd" "22"
[ 18.845] (**) Option "fd" "23"
[ 18.845] (**) Option "fd" "24"
[ 18.845] (II) UnloadModule: "libinput"
[ 18.845] (II) systemd-logind: releasing fd for 13:68
[ 18.880] (II) UnloadModule: "libinput"
[ 18.880] (II) systemd-logind: releasing fd for 13:71
[ 18.900] (II) UnloadModule: "libinput"
[ 18.900] (II) systemd-logind: releasing fd for 13:74
[ 18.926] (II) UnloadModule: "libinput"
[ 18.926] (II) systemd-logind: releasing fd for 13:75
[ 18.953] (II) UnloadModule: "libinput"
[ 18.953] (II) systemd-logind: releasing fd for 13:64
[ 18.980] (II) UnloadModule: "libinput"
[ 18.980] (II) systemd-logind: releasing fd for 13:72
[ 19.006] (II) UnloadModule: "libinput"
[ 19.006] (II) systemd-logind: releasing fd for 13:70
[ 19.033] (II) UnloadModule: "libinput"
[ 19.033] (II) systemd-logind: releasing fd for 13:65
[ 19.046] (II) UnloadModule: "libinput"
[ 19.046] (II) systemd-logind: releasing fd for 13:73
[ 19.060] (II) UnloadModule: "libinput"
[ 19.060] (II) systemd-logind: releasing fd for 13:77
[ 19.074] (II) UnloadModule: "libinput"
[ 19.074] (II) systemd-logind: releasing fd for 13:67
[ 19.164] (II) Server terminated successfully (0). Closing log file.Failed to initialize GLX extension (Compatible NVIDIA X driver not found) - I'm not sure why one couldn't just run on the initialized intel card instead..
Offline
#4 2015-11-29 14:50:30
- Fuxino
- Member
- From: Slovakia
- Registered: 2014-09-26
- Posts: 185
Re: Gnome does not start on fresh Arch install
It says "Server terminated successfully", so that seems to work.
Since you have a Intel/Nvidia hybrid graphics setup you should take a look at these wiki pages and see what works for you:
https://wiki.archlinux.org/index.php/NVIDIA_Optimus
https://wiki.archlinux.org/index.php/Bumblebee
Offline
#5 2015-11-29 14:55:44
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Re: Gnome does not start on fresh Arch install
For now I'd be glad to have a 2d accelerated desktop setup running on the iris pro card and ignore the nvidia card completely.
What I don't really get is why Xorg can't start gnome while it starts xfce just fine.. Any idea on this?
Offline
#6 2015-11-29 15:09:42
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,964
Re: Gnome does not start on fresh Arch install
kjozsa wrote:
What I don't really get is why Xorg can't start gnome while it starts xfce just fine.. Any idea on this?
That is due to the different way xfce and gnome do things, Xorg has no influence on that.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#7 2015-11-29 16:04:27
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Re: Gnome does not start on fresh Arch install
So what exactly do you suggest to get gnome working as well?
Offline
#8 2015-11-30 12:46:01
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,964
Re: Gnome does not start on fresh Arch install
first, install mesa-demos and run glxinfo .
It will give lots of information about the OpenGL capabilities on your setup.
glxinfo | grep -i renderer is a quick way to find out whether HW accelaration is used and which type.
You got some options :
- disable the nvidia card in bios/uefi firmware . (some systems allow that,others don't . )
- configure your system to use nvidia optimus (usually this requires a custom xorg.conf file)
- configure your system to use bumblebee
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#9 2015-11-30 12:52:18
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Re: Gnome does not start on fresh Arch install
What I did meanwhile was getting Bumblebee to work and after that also disabling the intel card in the bios and getting nvidia working as expected. In other words, I have working GLX with direct rendering on the nvidia card with or without the dual setup and also running Bioshock Infinite happily on it.
Gnome still doesn't start though, it looks the exact same as described in the first post 
Offline
#10 2015-11-30 16:13:49
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,440
Re: Gnome does not start on fresh Arch install
kjozsa wrote:
Gnome still doesn't start though, it looks the exact same as described in the first post
Offline
#11 2015-11-30 16:47:00
- kjozsa
- Member
- Registered: 2008-06-05
- Posts: 147
Re: Gnome does not start on fresh Arch install
No, I disabled wayland and even stripped the wayland and xorg-server-wayland packages from the system. Startx fails to start (with my xinitrc having `exec gnome-session` in it), and gdm also crashes continously in a loop.
Offline
Pages: 1