You are not logged in.
- Topics: Active | Unanswered
#1 2015-12-05 11:38:17
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
unable to extend LV - Buffer I/O error … dm-* … lost sync page write
Hi,
I would like to extend LV for root partition, but I got this error:
# lvextend -L+8G /dev/vg0/root
Size of logical volume vg0/root changed from 16,00 GiB (4096 extents) to 24,00 GiB (6144 extents).
/dev/mapper/raid0p3: write failed after 0 of 2048 at 12288: Operation not permitted.
Failed to write VG vg0.My configuration:
# pacman -Q linux lvm2
linux 4.2.5-1
lvm2 2.02.136-1
# pvs
PV VG Fmt Attr PSize PFree
/dev/mapper/raid0p3 vg0 lvm2 a-- 3,64t 1,61t
# vgs
VG #PV #LV #SN Attr VSize VFree
vg0 1 4 0 wz--n- 3,64t 1,61t
# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
...
root vg0 -wi-ao---- 16,00g
...
# mount | grep vg0-root
/dev/mapper/vg0-root on / type ext4 (rw,relatime,stripe=64,data=ordered)Thanks for any suggestions...
update:
dmesg shows error like these:
[ 211.508424] Buffer I/O error on dev dm-3, logical block 1606401, lost async page write
[ 211.524382] Buffer I/O error on dev dm-2, logical block 491520, lost async page write
[ 211.540815] Buffer I/O error on dev dm-4, logical block 268468224, lost async page write
[ 211.558114] Buffer I/O error on dev dm-2, logical block 0, lost async page write
[ 211.576183] Buffer I/O error on dev dm-3, logical block 0, lost async page write
[ 211.595251] Buffer I/O error on dev dm-4, logical block 0, lost async page write
[ 211.690571] Buffer I/O error on dev dm-3, logical block 0, lost sync page write(all of them all related to all of my logical volumes)
Last edited by pinnocchio (2015-12-10 17:34:57)
Offline
#2 2015-12-05 11:47:12
- frostschutz
- Member
- Registered: 2013-11-15
- Posts: 1,418
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
anything in dmesg?
Offline
#3 2015-12-05 11:54:39
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
There are some error in between 13 and 14:
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/disk/by-uuid/f4ee2e7c-990a-4736-aa57-3d8aa278db5d:raid0p3
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c5689fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c568a000-0x00000000c5690fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c5691000-0x00000000c5adefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c5adf000-0x00000000c60effff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c60f0000-0x00000000cb219fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb21a000-0x00000000cb2adfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb2ae000-0x00000000cb3bafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb3bb000-0x00000000cb7f9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb7fa000-0x00000000cbffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7850/H97 PC Mate(MS-7850), BIOS V5.7 05/28/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 042F000000 mask 7FFF000000 uncachable
[ 0.000000] 8 base 042EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd9d0-0x000fd9df] mapped at [ffff8800000fd9d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42ec00000-0x42edfffff]
[ 0.000000] [mem 0x42ec00000-0x42edfffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x42ebfffff]
[ 0.000000] [mem 0x420000000-0x42ebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc5689fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc55fffff] page 2M
[ 0.000000] [mem 0xc5600000-0xc5689fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc5691000-0xc5adefff]
[ 0.000000] [mem 0xc5691000-0xc57fffff] page 4k
[ 0.000000] [mem 0xc5800000-0xc59fffff] page 2M
[ 0.000000] [mem 0xc5a00000-0xc5adefff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc60f0000-0xcb219fff]
[ 0.000000] [mem 0xc60f0000-0xc61fffff] page 4k
[ 0.000000] [mem 0xc6200000-0xcb1fffff] page 2M
[ 0.000000] [mem 0xcb200000-0xcb219fff] page 4k
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcb2ae000-0xcb3bafff]
[ 0.000000] [mem 0xcb2ae000-0xcb3bafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
[ 0.000000] [mem 0xcbfff000-0xcbffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x33f36000-0x35f92fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CB7C3090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CB7D5C10 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CB7C31C0 012A4C (v02 ALASKA A M I 00000023 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CB7F9F80 000040
[ 0.000000] ACPI: APIC 0x00000000CB7D5D20 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CB7D5DB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CB7D5E00 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CB7D5EA0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB7D6B20 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CB7D7060 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CB7D7BD8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CB7D7C18 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB7D7C50 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB7D7FC0 005835 (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: ASF! 0x00000000CB7DD7F8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: UEFI 0x00000000CB7DD8A0 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: DMAR 0x00000000CB7DD8E8 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CB7DD9A0 0005AC (v02 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42edf8000-0x42edfbfff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e400000-ffff88042e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c5689fff]
[ 0.000000] node 0: [mem 0x00000000c5691000-0x00000000c5adefff]
[ 0.000000] node 0: [mem 0x00000000c60f0000-0x00000000cb219fff]
[ 0.000000] node 0: [mem 0x00000000cb2ae000-0x00000000cb3bafff]
[ 0.000000] node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042edfffff]
[ 0.000000] On node 0 totalpages: 4168352
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12917 pages used for memmap
[ 0.000000] DMA32 zone: 826640 pages, LIFO batch:31
[ 0.000000] Normal zone: 52152 pages used for memmap
[ 0.000000] Normal zone: 3337728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc568a000-0xc5690fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc5adf000-0xc60effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb21a000-0xcb2adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb3bb000-0xcb7f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb7fa000-0xcbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88042ea00000 s91480 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103198
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg0-root rw cryptdevice=/dev/disk/by-uuid/f4ee2e7c-990a-4736-aa57-3d8aa278db5d:raid0p3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16299176K/16673408K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 374232K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3599.802 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.58 BogoMIPS (lpj=11999340)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20150619
[ 0.011370] ACPI: All ACPI Tables successfully acquired
[ 0.011384] Security Framework initialized
[ 0.011385] Yama: becoming mindful.
[ 0.012012] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.015287] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016728] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.016739] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.016950] Initializing cgroup subsys blkio
[ 0.016952] Initializing cgroup subsys memory
[ 0.016957] Initializing cgroup subsys devices
[ 0.016959] Initializing cgroup subsys freezer
[ 0.016960] Initializing cgroup subsys net_cls
[ 0.016974] CPU: Physical Processor ID: 0
[ 0.016975] CPU: Processor Core ID: 0
[ 0.017686] mce: CPU supports 9 MCE banks
[ 0.017695] CPU0: Thermal monitoring enabled (TM1)
[ 0.017702] process: using mwait in idle threads
[ 0.017704] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.017705] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.017918] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[ 0.051532] ftrace: allocating 22161 entries in 87 pages
[ 0.057495] DMAR: Host address width 39
[ 0.057497] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.057503] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.057503] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.057506] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.057507] DMAR: RMRR base: 0x000000cbea1000 end: 0x000000cbeb0fff
[ 0.057508] DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
[ 0.057509] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.057510] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.057511] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.057511] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.057801] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.057802] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.058187] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091140] TSC deadline timer enabled
[ 0.091142] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
[ 0.091156] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.091169] ... version: 3
[ 0.091170] ... bit width: 48
[ 0.091170] ... generic registers: 4
[ 0.091171] ... value mask: 0000ffffffffffff
[ 0.091171] ... max period: 0000ffffffffffff
[ 0.091172] ... fixed-purpose events: 3
[ 0.091172] ... event mask: 000000070000000f
[ 0.104483] x86: Booting SMP configuration:
[ 0.104484] .... node #0, CPUs: #1
[ 0.108372] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.111652] #2 #3 #4 #5 #6 #7
[ 0.151912] x86: Booted up 1 node, 8 CPUs
[ 0.151915] smpboot: Total of 8 processors activated (57619.70 BogoMIPS)
[ 0.158279] devtmpfs: initialized
[ 0.160118] PM: Registering ACPI NVS region [mem 0xc568a000-0xc5690fff] (28672 bytes)
[ 0.160119] PM: Registering ACPI NVS region [mem 0xcb3bb000-0xcb7f9fff] (4452352 bytes)
[ 0.160205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.160259] pinctrl core: initialized pinctrl subsystem
[ 0.160292] RTC time: 11:02:31, date: 12/05/15
[ 0.160367] NET: Registered protocol family 16
[ 0.171462] cpuidle: using governor ladder
[ 0.184777] cpuidle: using governor menu
[ 0.184821] ACPI: bus type PCI registered
[ 0.184822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.184865] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.184866] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.184871] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.184918] PCI: Using configuration type 1 for base access
[ 0.185159] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.194943] ACPI: Added _OSI(Module Device)
[ 0.194944] ACPI: Added _OSI(Processor Device)
[ 0.194945] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194946] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.198033] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.200256] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.200909] ACPI: Dynamic OEM Table Load:
[ 0.200913] ACPI: SSDT 0xFFFF88041BE31800 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
[ 0.202289] ACPI: Interpreter enabled
[ 0.202294] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.202299] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.202312] ACPI: (supports S0 S3 S4 S5)
[ 0.202313] ACPI: Using IOAPIC for interrupt routing
[ 0.202331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.202614] ACPI: Power Resource [PG00] (on)
[ 0.202787] ACPI: Power Resource [PG01] (on)
[ 0.202954] ACPI: Power Resource [PG02] (on)
[ 0.204942] ACPI: Power Resource [WRST] (off)
[ 0.205095] ACPI: Power Resource [WRST] (off)
[ 0.205244] ACPI: Power Resource [WRST] (off)
[ 0.205394] ACPI: Power Resource [WRST] (off)
[ 0.205543] ACPI: Power Resource [WRST] (off)
[ 0.205693] ACPI: Power Resource [WRST] (off)
[ 0.205846] ACPI: Power Resource [WRST] (off)
[ 0.205997] ACPI: Power Resource [WRST] (off)
[ 0.208148] ACPI: Power Resource [FN00] (off)
[ 0.208191] ACPI: Power Resource [FN01] (off)
[ 0.208234] ACPI: Power Resource [FN02] (off)
[ 0.208275] ACPI: Power Resource [FN03] (off)
[ 0.208317] ACPI: Power Resource [FN04] (off)
[ 0.208863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.208867] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.209001] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.209078] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.209240] acpi PNP0A08:00: host bridge window expanded to [mem 0xcf200000-0xfeafffff window]; [mem 0xfe101000-0xfe113fff window] ignored
[ 0.209356] PCI host bridge to bus 0000:00
[ 0.209358] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.209359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.209360] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.209361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.209362] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.209362] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.209363] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.209364] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.209369] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.209422] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.209444] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.209487] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.209512] pci 0000:00:02.0: [8086:0412] type 00 class 0x038000
[ 0.209521] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.209526] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.209529] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.209588] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.209596] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.209663] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.209684] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.209724] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.209755] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.209778] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.209800] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1d000-0xf7a1d00f 64bit]
[ 0.209842] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.209910] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.209933] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.209992] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.210022] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.210046] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.210067] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.210112] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.210153] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.210177] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.210231] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.210279] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.210305] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[ 0.210353] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.210399] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.210423] pci 0000:00:1c.5: [8086:8c9a] type 01 class 0x060400
[ 0.210471] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.210518] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.210541] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.210589] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.210636] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.210661] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.210685] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a3ff]
[ 0.210742] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.210771] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.210797] pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100
[ 0.210921] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[ 0.210937] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.210943] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.210949] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.210955] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.210961] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.210967] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a19000-0xf7a197ff]
[ 0.210987] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.211027] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.211040] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a18000-0xf7a180ff 64bit]
[ 0.211057] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.211134] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[ 0.211151] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.211159] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.211168] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.211174] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.211180] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.211214] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.211237] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[ 0.211254] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.214749] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.214751] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.214752] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.214754] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.214810] acpiphp: Slot [1] registered
[ 0.214814] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.214879] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.214916] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.214964] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.215003] pci 0000:03:00.0: supports D1 D2
[ 0.215004] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.215041] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.221407] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.221411] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.221476] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.221512] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.221537] pci 0000:04:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.221554] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.221608] pci 0000:04:00.0: supports D1 D2
[ 0.221609] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221649] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.228066] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.228069] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.228072] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.228076] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.228140] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
[ 0.228248] pci 0000:05:00.0: supports D1 D2
[ 0.228249] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.228285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.234722] pci 0000:00:1c.6: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.234729] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.234730] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.234731] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.234732] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.234733] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.234733] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.234734] pci 0000:00:1c.6: bridge window [mem 0xcf200000-0xfeafffff window] (subtractive decode)
[ 0.234840] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.235449] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235480] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.235508] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.235537] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.235566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.235594] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.235623] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235651] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.235832] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.235893] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.235895] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235896] vgaarb: loaded
[ 0.235896] vgaarb: bridge control possible 0000:01:00.0
[ 0.235945] PCI: Using ACPI for IRQ routing
[ 0.237071] PCI: pci_cache_line_size set to 64 bytes
[ 0.237118] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 0.237119] e820: reserve RAM buffer [mem 0xc568a000-0xc7ffffff]
[ 0.237120] e820: reserve RAM buffer [mem 0xc5adf000-0xc7ffffff]
[ 0.237120] e820: reserve RAM buffer [mem 0xcb21a000-0xcbffffff]
[ 0.237121] e820: reserve RAM buffer [mem 0xcb3bb000-0xcbffffff]
[ 0.237122] e820: reserve RAM buffer [mem 0x42ee00000-0x42fffffff]
[ 0.237185] NetLabel: Initializing
[ 0.237185] NetLabel: domain hash size = 128
[ 0.237186] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.237194] NetLabel: unlabeled traffic allowed by default
[ 0.237213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.237216] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.239234] clocksource: Switched to clocksource hpet
[ 0.242383] pnp: PnP ACPI init
[ 0.242448] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.242450] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.242515] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.242517] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.242529] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.242550] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.242551] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.242625] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.242627] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.242628] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.242716] pnp 00:05: [dma 0 disabled]
[ 0.242742] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.242879] pnp 00:06: [dma 0 disabled]
[ 0.242930] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.242957] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.242958] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243165] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.243166] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.243167] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.243168] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.243170] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.243170] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.243172] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.243173] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.243174] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.243175] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.243176] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.243177] system 00:08: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.243178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243284] pnp: PnP ACPI: found 9 devices
[ 0.248967] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.248981] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.248983] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.248984] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.249011] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.249012] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.249013] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.249015] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.249016] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.249017] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.249020] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ 0.249023] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.249025] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.249026] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.249027] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.249029] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.249031] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.249033] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.249035] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.249039] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ 0.249042] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.249047] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.249050] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.249056] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.249058] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.249062] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.249065] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.249069] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.249084] pci 0000:00:1c.6: PCI bridge to [bus 05-06]
[ 0.249093] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.249094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.249095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.249096] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.249097] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.249097] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window]
[ 0.249098] pci_bus 0000:00: resource 10 [mem 0xcf200000-0xfeafffff window]
[ 0.249099] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.249100] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.249101] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.249102] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.249103] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
[ 0.249104] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.249105] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.249105] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.249106] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.249107] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.249108] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.249109] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.249110] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.249111] pci_bus 0000:05: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.249112] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.249112] pci_bus 0000:05: resource 9 [mem 0x000e4000-0x000e7fff window]
[ 0.249113] pci_bus 0000:05: resource 10 [mem 0xcf200000-0xfeafffff window]
[ 0.249131] NET: Registered protocol family 2
[ 0.249264] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249457] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.249618] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.249641] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.249690] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.249754] NET: Registered protocol family 1
[ 0.250068] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.250081] PCI: CLS 64 bytes, default 64
[ 0.250110] Unpacking initramfs...
[ 0.581989] Freeing initrd memory: 33140K (ffff880033f36000 - ffff880035f93000)
[ 0.582011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.582012] software IO TLB [mem 0xc721a000-0xcb21a000] (64MB) mapped at [ffff8800c721a000-ffff8800cb219fff]
[ 0.582070] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.582071] hw unit of domain pp0-core 2^-14 Joules
[ 0.582071] hw unit of domain package 2^-14 Joules
[ 0.582072] hw unit of domain dram 2^-14 Joules
[ 0.582073] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.582154] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582163] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582169] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582174] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582179] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582184] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582188] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582192] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1d
[ 0.582223] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.582271] Scanning for low memory corruption every 60 seconds
[ 0.582440] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.582467] Initialise system trusted keyring
[ 0.582669] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.583472] zpool: loaded
[ 0.583473] zbud: loaded
[ 0.583579] VFS: Disk quotas dquot_6.6.0
[ 0.583598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.583689] Key type big_key registered
[ 0.583783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.583817] io scheduler noop registered
[ 0.583820] io scheduler deadline registered
[ 0.583837] io scheduler cfq registered (default)
[ 0.584172] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.584175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.584182] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.584182] vesafb: scrolling: redraw
[ 0.584183] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.584189] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
[ 0.599832] Console: switching to colour frame buffer device 80x30
[ 0.615416] fb0: VESA VGA frame buffer device
[ 0.615426] intel_idle: MWAIT substates: 0x42120
[ 0.615426] intel_idle: v0.4 model 0x3C
[ 0.615427] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.615636] GHES: HEST is not enabled!
[ 0.615678] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.636157] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.636424] Linux agpgart interface v0.103
[ 0.636792] rtc_cmos 00:02: RTC can wake from S4
[ 0.636888] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.636912] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.636919] Intel P-state driver initializing.
[ 0.637090] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.637998] NET: Registered protocol family 10
[ 0.638450] NET: Registered protocol family 17
[ 0.639865] Loading compiled-in X.509 certificates
[ 0.639895] registered taskstats version 1
[ 0.639918] zswap: loading zswap
[ 0.639923] zswap: using zbud pool
[ 0.639936] zswap: using lzo compressor
[ 0.641996] Magic number: 11:538:23
[ 0.642098] memory memory63: hash matches
[ 0.642198] rtc_cmos 00:02: setting system clock to 2015-12-05 11:02:31 UTC (1449313351)
[ 0.642395] PM: Hibernation image not present or could not be loaded.
[ 0.643115] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[ 0.643119] Write protecting the kernel read-only data: 8192k
[ 0.643682] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
[ 0.643915] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
[ 0.656579] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.664412] device-mapper: uevent: version 1.0.3
[ 0.664512] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 0.668123] [drm] Initialized drm 1.1.0 20060810
[ 0.671510] nvidia: module license 'NVIDIA' taints kernel.
[ 0.671512] Disabling lock debugging due to kernel taint
[ 0.677445] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.677518] nvidia-nvlink: Nvlink Core is being initialized, major device number 249
[ 0.677610] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 0.677614] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
[ 0.695848] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.697942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.697967] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.701624] ACPI: bus type USB registered
[ 0.701639] usbcore: registered new interface driver usbfs
[ 0.701644] usbcore: registered new interface driver hub
[ 0.701673] usbcore: registered new device driver usb
[ 0.702098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.702290] ehci-pci: EHCI PCI platform driver
[ 0.702405] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.702409] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.702418] ehci-pci 0000:00:1a.0: debug port 2
[ 0.702932] SCSI subsystem initialized
[ 0.703720] libata version 3.00 loaded.
[ 0.705579] AVX2 version of gcm_enc/dec engaged.
[ 0.705581] AES CTR mode by8 optimization enabled
[ 0.706309] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.706323] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1b000
[ 0.718513] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.718637] hub 1-0:1.0: USB hub found
[ 0.718640] hub 1-0:1.0: 2 ports detected
[ 0.718818] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.718821] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.718830] ehci-pci 0000:00:1d.0: debug port 2
[ 0.722730] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.722738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1a000
[ 0.735188] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.735290] hub 2-0:1.0: USB hub found
[ 0.735292] hub 2-0:1.0: 2 ports detected
[ 0.735481] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.735487] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.735560] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.735564] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.735755] hub 3-0:1.0: USB hub found
[ 0.735770] hub 3-0:1.0: 14 ports detected
[ 0.738415] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.738417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.738618] hub 4-0:1.0: USB hub found
[ 0.738635] hub 4-0:1.0: 6 ports detected
[ 0.739790] ahci 0000:00:1f.2: version 3.0
[ 0.739914] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[ 0.739916] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.752331] scsi host0: ahci
[ 0.752572] scsi host1: ahci
[ 0.752811] scsi host2: ahci
[ 0.753037] scsi host3: ahci
[ 0.753163] scsi host4: ahci
[ 0.753364] scsi host5: ahci
[ 0.753423] ata1: SATA max UDMA/133 abar m2048@0xf7a19000 port 0xf7a19100 irq 28
[ 0.753425] ata2: SATA max UDMA/133 abar m2048@0xf7a19000 port 0xf7a19180 irq 28
[ 0.753427] ata3: SATA max UDMA/133 abar m2048@0xf7a19000 port 0xf7a19200 irq 28
[ 0.753428] ata4: DUMMY
[ 0.753428] ata5: DUMMY
[ 0.753429] ata6: DUMMY
[ 1.024718] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.041357] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.074641] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.074656] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.074669] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.075386] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.075388] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.075394] ata3.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.075395] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.075515] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.075517] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.076099] ata1.00: configured for UDMA/133
[ 1.076123] ata3.00: configured for UDMA/133
[ 1.076266] ata2.00: configured for UDMA/133
[ 1.076278] scsi 0:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.076649] scsi 1:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.076945] scsi 2:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.078660] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.078663] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.078684] sd 0:0:0:0: [sda] Write Protect is off
[ 1.078686] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.078687] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.078688] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.078697] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.078724] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.078726] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.078742] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.078744] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.078760] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.078762] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.078764] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.078787] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.082611] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.083118] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.089730] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.094651] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.126741] md: bind<sdb>
[ 1.131033] md: bind<sda>
[ 1.132856] md: bind<sdc>
[ 1.133763] md: bind<sda>
[ 1.133815] md: bind<sdc>
[ 1.133865] md: bind<sdb>
[ 1.148460] hub 1-1:1.0: USB hub found
[ 1.148570] hub 1-1:1.0: 6 ports detected
[ 1.165236] hub 2-1:1.0: USB hub found
[ 1.165301] hub 2-1:1.0: 8 ports detected
[ 1.191089] raid6: sse2x1 gen() 12278 MB/s
[ 1.247655] raid6: sse2x1 xor() 9956 MB/s
[ 1.254413] usb 3-1: device descriptor read/64, error -71
[ 1.304235] raid6: sse2x2 gen() 16010 MB/s
[ 1.360812] raid6: sse2x2 xor() 10805 MB/s
[ 1.417397] raid6: sse2x4 gen() 18563 MB/s
[ 1.473968] raid6: sse2x4 xor() 13084 MB/s
[ 1.517309] usb 3-1: device descriptor read/64, error -71
[ 1.530547] raid6: avx2x1 gen() 24806 MB/s
[ 1.580480] tsc: Refined TSC clocksource calibration: 3599.996 MHz
[ 1.580482] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44fb235b, max_idle_ns: 440795341910 ns
[ 1.587124] raid6: avx2x2 gen() 28474 MB/s
[ 1.643703] raid6: avx2x4 gen() 33165 MB/s
[ 1.643704] raid6: using algorithm avx2x4 gen() 33165 MB/s
[ 1.643704] raid6: using avx2x2 recovery algorithm
[ 1.643958] async_tx: api initialized (async)
[ 1.644138] xor: automatically using best checksumming function:
[ 1.676983] avx : 38074.800 MB/sec
[ 1.678076] md: raid6 personality registered for level 6
[ 1.678077] md: raid5 personality registered for level 5
[ 1.678078] md: raid4 personality registered for level 4
[ 1.678254] md/raid:md126: device sdb operational as raid disk 0
[ 1.678255] md/raid:md126: device sdc operational as raid disk 1
[ 1.678256] md/raid:md126: device sda operational as raid disk 2
[ 1.678416] md/raid:md126: allocated 3308kB
[ 1.678435] md/raid:md126: raid level 5 active with 3 out of 3 devices, algorithm 0
[ 1.678435] RAID conf printout:
[ 1.678436] --- level:5 rd:3 wd:3
[ 1.678436] disk 0, o:1, dev:sdb
[ 1.678437] disk 1, o:1, dev:sdc
[ 1.678437] disk 2, o:1, dev:sda
[ 1.678451] md126: detected capacity change from 0 to 4000791396352
[ 1.688336] md126: p1 p2 p3
[ 1.780166] usb 3-1: new full-speed USB device number 3 using xhci_hcd
[ 1.940022] usb 3-1: device descriptor read/64, error -71
[ 2.202990] usb 3-1: device descriptor read/64, error -71
[ 2.465783] usb 3-1: new full-speed USB device number 4 using xhci_hcd
[ 2.465958] usb 3-1: Device not responding to setup address.
[ 2.579118] clocksource: Switched to clocksource tsc
[ 2.668936] usb 3-1: Device not responding to setup address.
[ 2.871791] usb 3-1: device not accepting address 4, error -71
[ 3.031567] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[ 3.031736] usb 3-1: Device not responding to setup address.
[ 3.234749] usb 3-1: Device not responding to setup address.
[ 3.437601] usb 3-1: device not accepting address 5, error -71
[ 3.438294] usb usb3-port1: unable to enumerate USB device
[ 3.597348] usb 3-2: new high-speed USB device number 6 using xhci_hcd
[ 3.771177] hub 3-2:1.0: USB hub found
[ 3.771275] hub 3-2:1.0: 2 ports detected
[ 3.930164] usb 3-3: new high-speed USB device number 7 using xhci_hcd
[ 4.183089] usb 3-2.1: new full-speed USB device number 8 using xhci_hcd
[ 4.281157] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.285153] usbcore: registered new interface driver usbhid
[ 4.285154] usbhid: USB HID core driver
[ 4.285586] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:1532:0043.0001/input/input2
[ 4.285610] hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.1/input0
[ 4.286208] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:1532:0043.0002/input/input3
[ 4.336271] hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.1/input1
[ 4.336380] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:1532:0043.0003/input/input4
[ 4.389582] hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-2.1/input2
[ 4.436030] usb 3-4: new low-speed USB device number 9 using xhci_hcd
[ 4.621287] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.688965] usb 3-2.2: new low-speed USB device number 10 using xhci_hcd
[ 4.803514] usb 3-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.803516] usb 3-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.821833] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:045E:00DB.0005/input/input5
[ 4.872107] microsoft 0003:045E:00DB.0005: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-2.2/input0
[ 4.873062] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:045E:00DB.0006/input/input6
[ 4.925382] microsoft 0003:045E:00DB.0006: input,hidraw4: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-2.2/input1
[ 4.942855] hid-generic 0003:051D:0002.0004: hiddev0,hidraw5: USB HID v1.10 Device [American Power Conversion Back-UPS XS 950U FW:925.T1 .I USB FW:T1 ] on usb-0000:00:14.0-4/input0
[ 5.101634] usb 3-5: new high-speed USB device number 11 using xhci_hcd
[ 5.225106] random: nonblocking pool is initialized
[ 5.275357] hub 3-5:1.0: USB hub found
[ 5.275414] hub 3-5:1.0: 4 ports detected
[ 5.276021] usb: failed to peer 3-5-port4 and usb4-port4 by location (3-5-port4:none) (usb4-port4:usb3-port4)
[ 5.276023] usb 3-5-port4: failed to peer to usb4-port4 (-16)
[ 5.276024] usb: port power management may be unreliable
[ 5.554281] usb 3-5.4: new full-speed USB device number 12 using xhci_hcd
[ 5.650389] usb 3-5.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.652556] input: Saitek Saitek Pro Flight Yoke as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.4/3-5.4:1.0/0003:06A3:0BAC.0007/input/input7
[ 5.652676] hid-generic 0003:06A3:0BAC.0007: input,hidraw6: USB HID v1.11 Joystick [Saitek Saitek Pro Flight Yoke] on usb-0000:00:14.0-5.4/input0
[ 7.511396] NET: Registered protocol family 38
[ 7.515948] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 13.812721] Buffer I/O error on dev dm-1, logical block 1, lost async page write
[ 13.813244] Buffer I/O error on dev dm-1, logical block 2129920, lost async page write
[ 13.813955] Buffer I/O error on dev dm-1, logical block 0, lost async page write
[ 13.822908] ------------[ cut here ]------------
[ 13.822914] WARNING: CPU: 4 PID: 366 at fs/block_dev.c:57 __blkdev_put+0xbd/0x1f0()
[ 13.822915] Modules linked in: sha256_ssse3 sha256_generic hmac drbg ansi_cprng algif_skcipher af_alg hid_microsoft hid_generic usbhid hid raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq md_mod sd_mod atkbd libps2 crct10dif_pclmul crc32_pclmul crc32c_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper ahci libahci libata xhci_pci ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio nvidia(PO) drm dm_snapshot dm_bufio dm_crypt dm_mod cryptd
[ 13.822940] CPU: 4 PID: 366 Comm: fsck.ext4 Tainted: P O 4.2.5-1-ARCH #1
[ 13.822941] Hardware name: MSI MS-7850/H97 PC Mate(MS-7850), BIOS V5.7 05/28/2015
[ 13.822943] 0000000000000000 00000000aa8dc2af ffff880414567db8 ffffffff81570d0a
[ 13.822945] 0000000000000000 0000000000000000 ffff880414567df8 ffffffff810748a6
[ 13.822947] 0000000000000000 ffff88041dc28d00 ffff88041dc28e78 ffff88041dc28df0
[ 13.822949] Call Trace:
[ 13.822953] [<ffffffff81570d0a>] dump_stack+0x4c/0x6e
[ 13.822956] [<ffffffff810748a6>] warn_slowpath_common+0x86/0xc0
[ 13.822958] [<ffffffff810749da>] warn_slowpath_null+0x1a/0x20
[ 13.822960] [<ffffffff8120992d>] __blkdev_put+0xbd/0x1f0
[ 13.822961] [<ffffffff81209ee0>] blkdev_put+0x50/0x150
[ 13.822963] [<ffffffff8120a005>] blkdev_close+0x25/0x30
[ 13.822966] [<ffffffff811d251c>] __fput+0x9c/0x1f0
[ 13.822968] [<ffffffff811d26be>] ____fput+0xe/0x10
[ 13.822970] [<ffffffff810907e5>] task_work_run+0x85/0xb0
[ 13.822973] [<ffffffff81015a29>] do_notify_resume+0x69/0x70
[ 13.822975] [<ffffffff8157643c>] int_signal+0x12/0x17
[ 13.822977] ---[ end trace 0fe4f41dcb1678ad ]---
[ 13.841842] Buffer I/O error on dev dm-1, logical block 0, lost sync page write
[ 13.860354] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.426422] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.441147] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 14.441255] systemd[1]: Detected architecture x86-64.
[ 14.484630] systemd[1]: Set hostname to <hostname>.
[ 15.034123] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.043599] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.053442] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 15.063359] systemd[1]: Listening on Journal Socket.
[ 15.110073] systemd[1]: Created slice System Slice.
[ 15.122434] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 15.132042] systemd[1]: Starting Load Kernel Modules...
[ 15.141351] systemd[1]: Mounting Huge Pages File System...
[ 15.150846] systemd[1]: Starting Journal Service...
[ 15.159947] systemd[1]: Reached target Login Prompts.
[ 15.168983] systemd[1]: Listening on udev Kernel Socket.
[ 15.178089] systemd[1]: Listening on udev Control Socket.
[ 15.186684] systemd[1]: Reached target Remote File Systems.
[ 15.195081] systemd[1]: Created slice system-netctl.slice.
[ 15.203458] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 15.211759] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.219897] systemd[1]: Reached target Paths.
[ 15.227886] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 15.235776] systemd[1]: Reached target Encrypted Volumes.
[ 15.235983] EXT4-fs (dm-1): re-mounted. Opts: stripe=64,data=ordered
[ 15.237187] FS-Cache: Loaded
[ 15.243776] systemd[1]: Created slice system-getty.slice.
[ 15.251220] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.258630] systemd[1]: Created slice system-openvpn.slice.
[ 15.262867] RPC: Registered named UNIX socket transport module.
[ 15.262867] RPC: Registered udp transport module.
[ 15.262867] RPC: Registered tcp transport module.
[ 15.262868] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.266169] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.273434] systemd[1]: Reached target Swap.
[ 15.281063] systemd[1]: Mounting Debug File System...
[ 15.288370] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.296102] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 15.299732] FS-Cache: Netfs 'nfs' registered for caching
[ 15.304503] systemd[1]: Starting Setup Virtual Console...
[ 15.312396] systemd[1]: Created slice User and Session Slice.
[ 15.320450] systemd[1]: Reached target Slices.
[ 15.328928] systemd[1]: Mounted Huge Pages File System.
[ 15.336594] systemd[1]: Mounted POSIX Message Queue File System.
[ 15.343958] systemd[1]: Mounted Debug File System.
[ 15.351231] systemd[1]: Started Journal Service.
[ 15.365980] vboxdrv: Found 8 processor cores
[ 15.382362] vboxdrv: TSC mode is Invariant, tentative frequency 3599996731 Hz
[ 15.382363] vboxdrv: Successfully loaded version 5.0.10_OSE (interface 0x00240000)
[ 15.416021] VBoxNetAdp: Successfully started.
[ 15.416582] VBoxNetFlt: Successfully started.
[ 16.130503] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.150641] wmi: Mapper loaded
[ 16.151383] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[ 16.151387] ACPI: Power Button [PWRB]
[ 16.151424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[ 16.151426] ACPI: Sleep Button [SLPB]
[ 16.151463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[ 16.151464] ACPI: Power Button [PWRF]
[ 16.152714] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.153079] acpi device:16: registered as cooling_device13
[ 16.153126] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 16.165166] parport_pc 00:06: reported by Plug and Play ACPI
[ 16.165224] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 16.168421] thermal LNXTHERM:00: registered as thermal_zone0
[ 16.168423] ACPI: Thermal Zone [TZ00] (28 C)
[ 16.168675] thermal LNXTHERM:01: registered as thermal_zone1
[ 16.168677] ACPI: Thermal Zone [TZ01] (30 C)
[ 16.204865] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[ 16.204870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.314951] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 16.371730] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.378190] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc900018cc000, d8:cb:8a:9a:5f:5e, XID 0c000800 IRQ 30
[ 16.378192] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 16.380562] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 16.380565] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 16.451609] [drm] Memory usable by graphics device = 2048M
[ 16.451612] checking generic (f1000000 130000) vs hw (d0000000 10000000)
[ 16.451613] [drm] Replacing VGA console driver
[ 16.457272] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.457273] [drm] Driver supports precise vblank timestamp query.
[ 16.529867] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 16.529870] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 1
[ 16.541222] i915 0000:00:02.0: No connectors reported connected with modes
[ 16.541225] [drm] Cannot find any crtc or sizes - going 1024x768
[ 16.541531] checking generic (f1000000 130000) vs hw (d0000000 10000000)
[ 16.541616] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[ 16.541618] i915 0000:00:02.0: registered panic notifier
[ 16.564767] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 16.564770] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.564772] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.564773] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 16.564774] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 16.564776] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 16.564777] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 16.564778] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 16.576786] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 16.576817] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 16.576846] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 16.576871] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 16.576899] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 16.586679] intel_rapl: Found RAPL domain package
[ 16.586682] intel_rapl: Found RAPL domain core
[ 16.586684] intel_rapl: Found RAPL domain uncore
[ 16.586685] intel_rapl: Found RAPL domain dram
[ 16.610218] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 16.612493] iTCO_vendor_support: vendor-support=0
[ 16.612883] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.612913] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[ 16.612960] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.652825] ppdev: user-space parallel port driver
[ 16.657281] ath: EEPROM regdomain: 0x21
[ 16.657283] ath: EEPROM indicates we should expect a direct regpair map
[ 16.657283] ath: Country alpha2 being used: AU
[ 16.657284] ath: Regpair used: 0x21
[ 16.667921] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.668155] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90002300000, irq=16
[ 16.743073] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 16.837085] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 16.837125] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 16.837166] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 16.837277] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
[ 16.837318] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
[ 16.837350] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24
[ 16.837399] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25
[ 16.944034] mousedev: PS/2 mouse device common for all mice
[ 17.609054] md: md126 switched to read-write mode.
[ 18.018302] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: stripe=64,data=ordered
[ 18.228908] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: stripe=64,data=ordered
[ 18.315084] EXT4-fs (md126p2): mounted filesystem with ordered data mode. Opts: stripe=256,data=ordered
[ 18.402026] systemd-journald[405]: Received request to flush runtime journal from PID 1
[ 18.646956] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: stripe=64,data=ordered
[ 19.183341] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 19.594161] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 20.384613] wlp3s0: authenticate with 00:02:72:71:79:42
[ 20.405554] wlp3s0: send auth to 00:02:72:71:79:42 (try 1/3)
[ 20.407475] wlp3s0: authenticated
[ 20.407530] ath9k 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
[ 20.407532] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 20.407533] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 20.407663] wlp3s0: associate with 00:02:72:71:79:42 (try 1/3)
[ 20.422010] wlp3s0: RX AssocResp from 00:02:72:71:79:42 (capab=0x411 status=0 aid=3)
[ 20.422086] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 20.422125] wlp3s0: associated
[ 20.920071] usblp 3-3:1.1: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x03F0 pid 0xD811
[ 20.920093] usbcore: registered new interface driver usblp
[ 22.817150] NVRM: Your system is not currently configured to drive a VGA console
[ 22.817152] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 22.817153] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 22.817154] NVRM: drivers including, but not limited to, vesafb, may result in
[ 22.817155] NVRM: corruption and stability problems, and is not supported.
[ 22.867747] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
[ 22.868057] nvidia-modeset: Allocated GPU:0 (GPU-9e5ea654-696e-3846-e8df-0f67b9dd5f63) @ PCI:0000:01:00.0
[ 27.094082] tun: Universal TUN/TAP device driver, 1.6
[ 27.094083] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>Offline
#4 2015-12-05 12:59:26
- frostschutz
- Member
- Registered: 2013-11-15
- Posts: 1,418
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
Was that the session you tried lvextend in?
Something is very wrong when errors occur on dm-devices and not underlying storage too.
If this is dmraid, what's the status of that raid? dmsetup table?
Offline
#5 2015-12-05 13:08:55
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
Yes, this is the session I have tried to extend LV in.
My configuration is:
RAID 5 (3 hdd) [
/boot
LUKS [
LVM [
/, /home, ...
]
]
]I believe the RAID is OK; HDDs are pretty new and I have synced them a week ago (with no error).
# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md126 : active raid5 sdb[2] sdc[1] sda[0]
3907022848 blocks super external:/md127/0 level 5, 128k chunk, algorithm 0 [3/3] [UUU]
md127 : inactive sdc[2](S) sda[1](S) sdb[0](S)
9459 blocks super external:imsm
unused devices: <none>dmsetup table:
# dmsetup table
raid0p3: 0 7813507039 crypt aes-xts-plain64 0000000000000000000000000000000000000000000000000000000000000000 0 259:2 4096
vg0-home: 0 4294967296 linear 254:0 67110912
vg0-tmp: 0 8388608 linear 254:0 33556480
vg0-root: 0 33554432 linear 254:0 2048
vg0-var: 0 25165824 linear 254:0 41945088Offline
#6 2015-12-10 17:31:17
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
I found the dmesg errors are all related to all of my logical volumes. Still unable to solve this error.
Offline
#7 2015-12-13 13:07:21
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
I've found a strange configuration on cryptsetup:
# cryptsetup status raid0p3
/dev/mapper/raid0p3 is active and is in use.
type: LUKS1
cipher: aes-xts-plain64
keysize: 256 bits
device: /dev/md126p3
offset: 4096 sectors
size: 7813507039 sectors
mode: readonlyI don't understand why is the mode "readonly" and why I'm able to write to LVs and unable to modify the VG.
I'm using same configuration (except of RAID) on my other computer and it works fine - and shows "read/write" mode in cryptsetup status.
Any idea?
PS: I've tried to open LUKS partition and LVs in live Arch (with same kernel) and it works fine - no error in dmesg and it shows "read/write" mode.
I've extended the LV too, but I still want to solve this damned mystery...
Offline
#8 2015-12-13 13:21:46
- frostschutz
- Member
- Registered: 2013-11-15
- Posts: 1,418
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
If the cryptsetup is readonly, that would explain a lot of things. Unfortunately that is not shown in dmsetup table.
Can you also show your /etc/crypttab, and mdadm --detail /dev/md*; mdadm --examine /dev/sd* in case the md itself is readonly?
Offline
#9 2015-12-13 14:13:29
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
/etc/crypttab is empty because the encrypted device is opened according to grub configuration:
# cat /etc/default/grub
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="cryptdevice=/dev/disk/by-uuid/f4ee2e7c-990a-4736-aa57-3d8aa278db5d:raid0p3"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos cryptodisk luks"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"# mdadm --detail /dev/md?*
/dev/md126:
Container : /dev/md/imsm0, member 0
Raid Level : raid5
Array Size : 3907022848 (3726.03 GiB 4000.79 GB)
Used Dev Size : 1953511424 (1863.01 GiB 2000.40 GB)
Raid Devices : 3
Total Devices : 3
State : active
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-asymmetric
Chunk Size : 128K
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
Number Major Minor RaidDevice State
2 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
0 8 0 2 active sync /dev/sda
/dev/md126p1:
Container : /dev/md/imsm0, member 0
Raid Level : raid5
Array Size : 4096
Used Dev Size : 1953511424 (1863.01 GiB 2000.40 GB)
Raid Devices : 3
Total Devices : 3
State : active
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-asymmetric
Chunk Size : 128K
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
Number Major Minor RaidDevice State
2 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
0 8 0 2 active sync /dev/sda
/dev/md126p2:
Container : /dev/md/imsm0, member 0
Raid Level : raid5
Array Size : 262144 (256.00 MiB 268.44 MB)
Used Dev Size : 1953511424 (1863.01 GiB 2000.40 GB)
Raid Devices : 3
Total Devices : 3
State : active
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-asymmetric
Chunk Size : 128K
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
Number Major Minor RaidDevice State
2 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
0 8 0 2 active sync /dev/sda
/dev/md126p3:
Container : /dev/md/imsm0, member 0
Raid Level : raid5
Array Size : 3906755567 (3725.77 GiB 4000.52 GB)
Used Dev Size : unknown
Raid Devices : 3
Total Devices : 3
State : active
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-asymmetric
Chunk Size : 128K
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
Number Major Minor RaidDevice State
2 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
0 8 0 2 active sync /dev/sda
/dev/md127:
Version : imsm
Raid Level : container
Total Devices : 3
Working Devices : 3
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Member Arrays : /dev/md/raid0
Number Major Minor RaidDevice
0 8 32 - /dev/sdc
1 8 0 - /dev/sda
2 8 16 - /dev/sdb# mdadm --examine /dev/sd[abc]
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012b
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e982e99a correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 2
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : dirty
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012b
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e982e99a correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 0
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : dirty
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
/dev/sdc:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012b
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e982e99a correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 1
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : dirty
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)Offline
#10 2015-12-13 15:34:04
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
mdadm --examine result from "live" OS:
# mdadm --examine /dev/sd[abc]
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012e
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e981e99f correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 2
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012e
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e981e99f correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 0
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
/dev/sdc:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : d2c00091
Family : d2c00091
Generation : 0000012e
Attributes : All supported
UUID : 033c4562:755db825:dd0c6c09:ab36761f
Checksum : e981e99f correct
MPB Sectors : 2
Disks : 3
RAID Devices : 1
Disk01 Serial : WD-WCC4M6ADSNXS
State : active
Id : 00000002
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
[raid0]:
UUID : 60935d9d:1b81f887:9a29cd13:c128752a
RAID Level : 5
Members : 3
Slots : [UUU]
Failed disk : none
This Slot : 1
Array Size : 7814045696 (3726.03 GiB 4000.79 GB)
Per Dev Size : 3907022848 (1863.01 GiB 2000.40 GB)
Sector Offset : 0
Num Stripes : 15261808
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : WD-WCC4M5XPT449
State : active
Id : 00000001
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)
Disk02 Serial : WD-WCC4M4FD9D5Z
State : active
Id : 00000000
Usable Size : 3907022862 (1863.01 GiB 2000.40 GB)diff:
dirty state: "dirty" vs. "clean"
generation: "0000012e" vs "0000012b"
Offline
#11 2015-12-13 16:02:36
- pinnocchio
- Member
- Registered: 2015-01-24
- Posts: 11
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
When I open encrypted device, it shows "dirty" too - is it normal?
Offline
#12 2015-12-13 17:56:51
- frostschutz
- Member
- Registered: 2013-11-15
- Posts: 1,418
Re: unable to extend LV - Buffer I/O error … dm-* … lost sync page write
Sorry, at a glance none of that seems to show why it would be read-only. I'm stumped. Hope you'll be able to track this down somehow. Good luck...
Offline