You are not logged in.

Pages: 1

#1 2015-12-19 23:24:11

Marvix
Member
Registered: 2013-10-08
Posts: 146

[SOLVED] No disc available (CD/DVD drive)

I cannot see any optical disc drive to PCManFM. It isn't shown to the sidebar.

I didn't make any change to my system, only the regular updates for the Arch. Where should I look?

I use laptop and and the CD/DVD drive works fine (I've booted some distros to be sure).

Last edited by Marvix (2017-11-02 17:12:16)

Offline

#2 2015-12-20 04:48:49

Archforum101
Member
Registered: 2015-12-11
Posts: 44

Re: [SOLVED] No disc available (CD/DVD drive)

Just a thought, might try drag n dropping them into the sidebar ? Only messed around with pcmanfm so have no idea if that'd work for you. Mostly used thunar ... n which dragging stuff into the sidebar works fine.

Offline

#3 2015-12-20 06:56:09

erykroom
Member
Registered: 2013-12-06
Posts: 25

Re: [SOLVED] No disc available (CD/DVD drive)

Maybe from the drop down menu  Edit > Preferences > Layout > Show in Places > Devices

Offline

#4 2015-12-20 08:42:40

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

Thank you for your replies.

Actually it must be a general problem beyond the file manager. I also tried thunar and it is still the same problem.

The disc drive doesn't load on the file manager also doesn't appear to the available devices and CD software like Brasero and xfburn. It doesn't appear from the system.

Offline

#5 2015-12-20 10:42:19

Chazza
Wiki Maintainer
Registered: 2013-06-02
Posts: 506

Re: [SOLVED] No disc available (CD/DVD drive)

Is gvfsd running? How are you starting the session?

Offline

#6 2015-12-20 11:41:14

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

Yes gvfsd is running. The running gvsfd are the above

gvfsd-trash
gvfsd-network
gvfsd-metadata
gvfsd-fuse
gvfsd-dnssd
gvfsd-computer
gvfsd
gvfsd-udisks2-volume-monitor
gvfsd-afc-volume-monitor

My xinitrc is

# Disable beep sound on boot
xset b off &
xset b 0 0 0 &

# Enable Numpad on boot
numlockx &

# Start LXDE
exec startlxde
#exec openbox

Offline

#7 2015-12-21 21:22:08

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

I've tried with other DE like Mate and XFCE and the problem exists.

Something is missing and I can't find any help from the wiki.

Any thoughts?

Offline

#8 2015-12-21 21:43:56

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: [SOLVED] No disc available (CD/DVD drive)

Marvix wrote:

The disc drive doesn't load on the file manager also doesn't appear to the available devices and CD software like Brasero and xfburn. It doesn't appear from the system.

Maybe you should start here. Check the output of dmesg for anything that might point to why it isn't being detected. If it is detected you should have /dev/sr0.

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#9 2015-12-21 21:58:54

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

Are you starting your DE/WM with startx? If so paste your .xinitrc.

But yeah check whether sr0 is in `lsblk` first.

Also are you expecting it to show up when there is no disc inside or when there is?

Last edited by tom.ty89 (2015-12-21 22:05:18)

Offline

#10 2015-12-21 23:14:32

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

I start my DE, LXDE with startx.

My xinitrc is

# Disable beep sound on boot
xset b off &
xset b 0 0 0 &

# Enable Numpad on boot
numlockx &

# Start LXDE
exec startlxde
#exec openbox

lsblk doesn't show sr0 either with a disc insert or not.

From the dmesg is get this part

[   10.892457] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.892458] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.903502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.962429] [drm] Memory usable by graphics device = 2048M
[   10.962433] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[   10.962435] fb: switching to inteldrmfb from VESA VGA
[   10.962458] Console: switching to colour dummy device 80x25
[   10.962530] [drm] Replacing VGA console driver
[   10.963589] ACPI: Battery Slot [BAT1] (battery absent)
[   10.968989] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.968991] [drm] Driver supports precise vblank timestamp query.
[   10.969080] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.985861] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[   10.990330] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.990443] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8
[   10.990468] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[   11.001279] fbcon: inteldrmfb (fb0) is primary device
[   11.013218] ACPI: AC Adapter [ACAD] (on-line)
[   11.295034] thermal LNXTHERM:00: registered as thermal_zone0
[   11.295036] ACPI: Thermal Zone [TZ00] (45 C)
[   11.324263] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   11.369452] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[   11.369485] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[   11.390650] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:e5:2f:49]
[   11.470817] iTCO_vendor_support: vendor-support=0
[   11.595851] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.595893] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   11.596033] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.667699] alx 0000:01:00.0 enp1s0: renamed from eth0
[   11.780972] snd_hda_codec_conexant hdaudioC0D0: CX20757: BIOS auto-probing.
[   11.781275] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.781276] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.781278] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   11.781279] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   11.781280] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   11.781281] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[   11.781283] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[   11.782058] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   11.805135] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.808673] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.808766] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.808858] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.816069] Console: switching to colour frame buffer device 170x48
[   11.818960] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.818962] i915 0000:00:02.0: registered panic notifier
[   12.170175] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
[   12.197153] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[   12.218543] psmouse serio1: elantech: Elan sample query result 04, 5c, 85
[   12.228341] intel_rapl: Found RAPL domain package
[   12.228344] intel_rapl: Found RAPL domain core
[   12.228346] intel_rapl: Found RAPL domain uncore
[   12.347194] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   12.385309] mousedev: PS/2 mouse device common for all mice
[   12.746152] Non-volatile memory driver v1.3
[   12.755650] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.755654] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.755656] thinkpad_acpi: ThinkPad BIOS 78CN16WW(V1.04), EC unknown
[   12.805583] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   12.805648] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   12.805898] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   13.120350] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[   13.704097] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   13.705153] alx 0000:01:00.0 enp1s0: NIC Up: 100 Mbps Full
[   13.705749] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   14.084953] media: Linux media interface: v0.10
[   14.091017] Linux video capture interface: v2.00
[   14.231557] usbcore: registered new interface driver uvcvideo
[   14.231562] USB Video Class driver (1.1.1)
[  581.394368] fuse init (API version 7.23)

Can't find anything related with the problem.

The /dev/sr0 doesn't exist.

Offline

#11 2015-12-21 23:54:48

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

Can't you post your full dmesg here or to a pastebin? If sr0 doesn't show up it is about the kernel/hardware. How is the drive connected?

P.S. Add this to the top of your .xinitrc to make sure dbus works correctly, although it has nothing to do with your CURRENT problem: https://ptpb.pw/dREl.txt

Offline

#12 2015-12-22 00:11:04

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

It is an internal disc driver of a laptop. It works with other bootable distros, but now with this current system.

The whole dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=164ccf04-6d3a-45bb-a6ac-32f287243053 rw quiet
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c3fecfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c3fed000-0x00000000c4d6dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c4d6e000-0x00000000c4daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000caabefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caabf000-0x00000000caebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20236/INVALID, BIOS 78CN16WW(V1.04) 04/17/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 base 0C8000000 mask FFE000000 write-back
[    0.000000]   4 base 0CA000000 mask FFF000000 write-back
[    0.000000]   5 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   6 base 100000000 mask FC0000000 write-back
[    0.000000]   7 base 12F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 12F800000 mask FFF800000 uncachable
[    0.000000]   9 base 130000000 mask FF0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12f400000-0x12f5fffff]
[    0.000000]  [mem 0x12f400000-0x12f5fffff] page 2M
[    0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x120000000-0x12f3fffff]
[    0.000000]  [mem 0x120000000-0x12f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[    0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xc3fecfff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xc3dfffff] page 2M
[    0.000000]  [mem 0xc3e00000-0xc3fecfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xc4d6e000-0xc4daffff]
[    0.000000]  [mem 0xc4d6e000-0xc4daffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xc61b0000-0xcaabefff]
[    0.000000]  [mem 0xc61b0000-0xc61fffff] page 4k
[    0.000000]  [mem 0xc6200000-0xca9fffff] page 2M
[    0.000000]  [mem 0xcaa00000-0xcaabefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[    0.000000]  [mem 0xcafff000-0xcaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x378fa000-0x37c74fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000CAFFE210 000094 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000CAFFA000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000CAFED000 009FA0 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000CAFBB000 000040
[    0.000000] ACPI: SLIC 0x00000000CAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x00000000CAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000CAFFB000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000CAFF9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000CAFF8000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000CAFF7000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000CAFEC000 0006FE (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000CAFEA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000CAFE8000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x00000000CAFE7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000CAFE5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000CAFE3000 0008E4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000CAFE2000 000B22 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12f5f5000-0x12f5f8fff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012ac00000-ffff88012ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000c3fecfff]
[    0.000000]   node   0: [mem 0x00000000c4d6e000-0x00000000c4daffff]
[    0.000000]   node   0: [mem 0x00000000c61b0000-0x00000000caabefff]
[    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012f5fffff]
[    0.000000] On node 0 totalpages: 1015002
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12765 pages used for memmap
[    0.000000]   DMA32 zone: 816958 pages, LIFO batch:31
[    0.000000]   Normal zone: 3032 pages used for memmap
[    0.000000]   Normal zone: 194048 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc3fed000-0xc4d6dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaabf000-0xcaebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88012f200000 s91480 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 999120
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=164ccf04-6d3a-45bb-a6ac-32f287243053 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3911948K/4060008K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 148060K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.623 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.79 BogoMIPS (lpj=7982076)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20150619
[    0.007735] ACPI: All ACPI Tables successfully acquired
[    0.007755] Security Framework initialized
[    0.007757] Yama: becoming mindful.
[    0.008001] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009045] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009511] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009516] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009726] Initializing cgroup subsys blkio
[    0.009728] Initializing cgroup subsys memory
[    0.009736] Initializing cgroup subsys devices
[    0.009738] Initializing cgroup subsys freezer
[    0.009740] Initializing cgroup subsys net_cls
[    0.009760] CPU: Physical Processor ID: 0
[    0.009761] CPU: Processor Core ID: 0
[    0.009766] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009766] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009769] mce: CPU supports 7 MCE banks
[    0.009780] CPU0: Thermal monitoring enabled (TM1)
[    0.009786] process: using mwait in idle threads
[    0.009789] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009790] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.010216] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[    0.024793] ftrace: allocating 22161 entries in 87 pages
[    0.035257] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.035714] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068751] TSC deadline timer enabled
[    0.068754] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.068778] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.068798] ... version:                3
[    0.068799] ... bit width:              48
[    0.068800] ... generic registers:      4
[    0.068801] ... value mask:             0000ffffffffffff
[    0.068802] ... max period:             0000ffffffffffff
[    0.068803] ... fixed-purpose events:   3
[    0.068803] ... event mask:             000000070000000f
[    0.082191] x86: Booting SMP configuration:
[    0.082192] .... node  #0, CPUs:      #1
[    0.085427] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088875]  #2 #3
[    0.098800] x86: Booted up 1 node, 4 CPUs
[    0.098804] smpboot: Total of 4 processors activated (19164.19 BogoMIPS)
[    0.102039] devtmpfs: initialized
[    0.104315] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
[    0.104405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.104484] pinctrl core: initialized pinctrl subsystem
[    0.104526] RTC time:  2:02:07, date: 12/22/15
[    0.104628] NET: Registered protocol family 16
[    0.112188] cpuidle: using governor ladder
[    0.125541] cpuidle: using governor menu
[    0.125591] Simple Boot Flag at 0x44 set to 0x1
[    0.125619] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.125620] ACPI: bus type PCI registered
[    0.125621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.125693] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.125695] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.125701] PCI: Using configuration type 1 for base access
[    0.125864] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.139201] ACPI: Added _OSI(Module Device)
[    0.139203] ACPI: Added _OSI(Processor Device)
[    0.139204] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.139205] ACPI: Added _OSI(Processor Aggregator Device)
[    0.141858] ACPI: Executed 1 blocks of module-level executable AML code
[    0.144295] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.144698] ACPI: Dynamic OEM Table Load:
[    0.144707] ACPI: SSDT 0xFFFF880129F58000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20120111)
[    0.145237] ACPI: Dynamic OEM Table Load:
[    0.145243] ACPI: SSDT 0xFFFF880129F31800 000303 (v01 PmRef  ApIst    00003000 INTL 20120111)
[    0.145713] ACPI: Dynamic OEM Table Load:
[    0.145718] ACPI: SSDT 0xFFFF880129EE2200 000119 (v01 PmRef  ApCst    00003000 INTL 20120111)
[    0.146569] ACPI : EC: EC started
[    0.146696] ACPI: Interpreter enabled
[    0.146702] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.146706] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.146720] ACPI: (supports S0 S3 S4 S5)
[    0.146721] ACPI: Using IOAPIC for interrupt routing
[    0.146743] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.249423] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.249428] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.249535] \_SB_.PCI0:_OSC invalid UUID
[    0.249536] _OSC request data:1 1f 0 
[    0.249540] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.249923] PCI host bridge to bus 0000:00
[    0.249925] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.249927] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.249929] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.249931] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.249932] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.249939] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.250018] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.250032] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.250038] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.250043] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.250149] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.250180] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
[    0.250237] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.250270] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.250311] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.250344] pci 0000:00:16.0: reg 0x10: [mem 0xe0614000-0xe061400f 64bit]
[    0.250404] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.250479] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.250508] pci 0000:00:1a.0: reg 0x10: [mem 0xe0619000-0xe06193ff]
[    0.250577] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.250630] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.250672] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.250699] pci 0000:00:1b.0: reg 0x10: [mem 0xe0610000-0xe0613fff 64bit]
[    0.250759] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.250793] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.250832] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.250904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.250982] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.251011] pci 0000:00:1d.0: reg 0x10: [mem 0xe0618000-0xe06183ff]
[    0.251081] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.251133] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.251174] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.251333] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.251357] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.251365] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.251373] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.251381] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.251389] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.251398] pci 0000:00:1f.2: reg 0x24: [mem 0xe0617000-0xe06177ff]
[    0.251426] pci 0000:00:1f.2: PME# supported from D3hot
[    0.251489] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.251507] pci 0000:00:1f.3: reg 0x10: [mem 0xe0615000-0xe06150ff 64bit]
[    0.251528] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.251749] pci 0000:01:00.0: [1969:10a0] type 00 class 0x020000
[    0.251957] pci 0000:01:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit]
[    0.252006] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.252351] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252451] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.259199] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.259203] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.259208] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.309426] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.309472] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.309516] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.309559] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.309602] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.309645] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.309688] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.309732] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.309823] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.309857] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.309949] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.309951] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.309953] vgaarb: loaded
[    0.309954] vgaarb: bridge control possible 0000:00:02.0
[    0.310048] PCI: Using ACPI for IRQ routing
[    0.311635] PCI: pci_cache_line_size set to 64 bytes
[    0.311808] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.311810] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.311811] e820: reserve RAM buffer [mem 0xc3fed000-0xc3ffffff]
[    0.311812] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
[    0.311813] e820: reserve RAM buffer [mem 0xcaabf000-0xcbffffff]
[    0.311815] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.311816] e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
[    0.311922] NetLabel: Initializing
[    0.311923] NetLabel:  domain hash size = 128
[    0.311924] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.311935] NetLabel:  unlabeled traffic allowed by default
[    0.311965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.311970] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.314001] clocksource: Switched to clocksource hpet
[    0.318910] pnp: PnP ACPI init
[    0.319036] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.319038] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.319040] system 00:00: [io  0xffff] has been reserved
[    0.319042] system 00:00: [io  0xffff] has been reserved
[    0.319044] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.319046] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.319047] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.319049] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.319051] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.319054] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.319079] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.319123] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.319126] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.319148] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.319211] pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[    0.367530] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.367532] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.367534] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.367536] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.367537] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.367539] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.367541] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.367542] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    0.367544] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    0.367546] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.367548] system 00:05: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    0.367550] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367832] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.367834] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.367836] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.367851] pnp: PnP ACPI: found 7 devices
[    0.374150] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.374170] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.374173] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.374179] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.374189] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.374190] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.374192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.374194] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.374196] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.374197] pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.374229] NET: Registered protocol family 2
[    0.374390] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.374467] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.374565] TCP: Hash tables configured (established 32768 bind 32768)
[    0.374587] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.374604] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.374655] NET: Registered protocol family 1
[    0.374669] pci 0000:00:02.0: Video device with shadowed ROM
[    1.708533] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.043002] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.043181] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[    3.043222] PCI: CLS 64 bytes, default 64
[    3.043267] Unpacking initramfs...
[    3.103562] Freeing initrd memory: 3564K (ffff8800378fa000 - ffff880037c75000)
[    3.103573] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.103575] software IO TLB [mem 0xc6abf000-0xcaabf000] (64MB) mapped at [ffff8800c6abf000-ffff8800caabefff]
[    3.103638] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    3.103640] hw unit of domain pp0-core 2^-16 Joules
[    3.103641] hw unit of domain package 2^-16 Joules
[    3.103642] hw unit of domain pp1-gpu 2^-16 Joules
[    3.103759] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    3.103767] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    3.103778] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    3.103786] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    3.103842] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.103923] Scanning for low memory corruption every 60 seconds
[    3.104196] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    3.104227] Initialise system trusted keyring
[    3.104582] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.105907] zpool: loaded
[    3.105909] zbud: loaded
[    3.106085] VFS: Disk quotas dquot_6.6.0
[    3.106118] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.106264] Key type big_key registered
[    3.106428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.106467] io scheduler noop registered
[    3.106471] io scheduler deadline registered
[    3.106500] io scheduler cfq registered (default)
[    3.106713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.106719] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.106731] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    3.106732] vesafb: scrolling: redraw
[    3.106734] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.106744] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[    3.176395] Console: switching to colour frame buffer device 170x48
[    3.245737] fb0: VESA VGA frame buffer device
[    3.245753] intel_idle: MWAIT substates: 0x21120
[    3.245755] intel_idle: v0.4 model 0x3A
[    3.245756] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.245928] GHES: HEST is not enabled!
[    3.245996] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.246403] Linux agpgart interface v0.103
[    3.246704] rtc_cmos 00:01: RTC can wake from S4
[    3.246828] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.246856] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.246867] Intel P-state driver initializing.
[    3.246975] ledtrig-cpu: registered to indicate activity on CPUs
[    3.247571] NET: Registered protocol family 10
[    3.247886] NET: Registered protocol family 17
[    3.248611] Loading compiled-in X.509 certificates
[    3.248630] registered taskstats version 1
[    3.248646] zswap: loading zswap
[    3.248650] zswap: using zbud pool
[    3.248656] zswap: using lzo compressor
[    3.249244]   Magic number: 11:859:5
[    3.249348] rtc_cmos 00:01: setting system clock to 2015-12-22 02:02:10 UTC (1450749730)
[    3.249501] PM: Hibernation image not present or could not be loaded.
[    3.249980] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[    3.249982] Write protecting the kernel read-only data: 8192k
[    3.250398] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
[    3.250579] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
[    3.262332] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    3.304685] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[    3.325522] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.325619] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.327745] ACPI: bus type USB registered
[    3.327790] usbcore: registered new interface driver usbfs
[    3.327808] usbcore: registered new interface driver hub
[    3.328038] usbcore: registered new device driver usb
[    3.328714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.328934] ehci-pci: EHCI PCI platform driver
[    3.329098] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.329106] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.329121] ehci-pci 0000:00:1a.0: debug port 2
[    3.329481] SCSI subsystem initialized
[    3.333034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.333054] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0619000
[    3.333328] libata version 3.00 loaded.
[    3.339930] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.340173] hub 1-0:1.0: USB hub found
[    3.340187] hub 1-0:1.0: 2 ports detected
[    3.340478] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.340485] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.340499] ehci-pci 0000:00:1d.0: debug port 2
[    3.344423] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.344442] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0618000
[    3.353307] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.353583] hub 2-0:1.0: USB hub found
[    3.353597] hub 2-0:1.0: 2 ports detected
[    3.353982] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.353993] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    3.354101] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    3.354112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.354443] hub 3-0:1.0: USB hub found
[    3.354461] hub 3-0:1.0: 4 ports detected
[    3.354969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.354974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    3.355134] hub 4-0:1.0: USB hub found
[    3.355146] hub 4-0:1.0: 4 ports detected
[    3.355528] ahci 0000:00:1f.2: version 3.0
[    3.355726] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.364102] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.366678] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    3.366682] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    3.374118] scsi host0: ahci
[    3.374261] scsi host1: ahci
[    3.374382] scsi host2: ahci
[    3.374494] scsi host3: ahci
[    3.374611] scsi host4: ahci
[    3.374726] scsi host5: ahci
[    3.374797] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[    3.374800] ata2: DUMMY
[    3.374804] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[    3.374806] ata4: DUMMY
[    3.374807] ata5: DUMMY
[    3.374809] ata6: DUMMY
[    3.646880] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.660235] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.693612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.700004] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[    3.700010] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.706487] ata1.00: configured for UDMA/100
[    3.706750] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[    3.713603] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    3.771074] hub 1-1:1.0: USB hub found
[    3.771404] hub 1-1:1.0: 6 ports detected
[    3.784598] hub 2-1:1.0: USB hub found
[    3.784754] hub 2-1:1.0: 6 ports detected
[    3.890573] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.892920] hidraw: raw HID events driver (C) Jiri Kosina
[    3.895377] usbcore: registered new interface driver usbhid
[    3.895381] usbhid: USB HID core driver
[    3.896338] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0000:0538.0001/input/input3
[    3.896424] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
[    4.037241] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    4.050580] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    4.103961] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    4.103971] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[    4.190706] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    4.278923] usbcore: registered new interface driver rtsx_usb
[    5.105082] clocksource: Switched to clocksource tsc
[    5.918827] ata3: SATA link down (SStatus 1 SControl 300)
[    5.923030] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.923040] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.923192] sd 0:0:0:0: [sda] Write Protect is off
[    5.923202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.923252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.951450]  sda: sda1 sda2
[    5.951995] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.388953] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.084919] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    7.283704] random: nonblocking pool is initialized
[    7.316591] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.328186] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.328461] systemd[1]: Detected architecture x86-64.
[    7.334848] systemd[1]: Set hostname to <marvix>.
[    8.266881] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.267571] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.267615] systemd[1]: Reached target Remote File Systems.
[    8.267666] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.267681] systemd[1]: Reached target Paths.
[    8.267698] systemd[1]: Reached target Encrypted Volumes.
[    8.267742] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.267756] systemd[1]: Reached target Swap.
[    8.267953] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.268379] systemd[1]: Created slice User and Session Slice.
[    8.268428] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.268475] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.268508] systemd[1]: Listening on udev Kernel Socket.
[    8.268550] systemd[1]: Listening on udev Control Socket.
[    8.295109] systemd[1]: Listening on Journal Socket.
[    8.295246] systemd[1]: Created slice System Slice.
[    8.295874] systemd[1]: Starting Journal Service...
[    8.296034] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.296666] systemd[1]: Mounting Debug File System...
[    8.332418] systemd[1]: Starting Set Up Additional Binary Formats...
[    8.339968] systemd[1]: Starting Load Kernel Modules...
[    8.340674] systemd[1]: Mounting Huge Pages File System...
[    8.340892] systemd[1]: Created slice system-getty.slice.
[    8.341635] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.342259] systemd[1]: Mounting POSIX Message Queue File System...
[    8.367232] systemd[1]: Mounting Temporary Directory...
[    8.367962] systemd[1]: Starting Setup Virtual Console...
[    8.368006] systemd[1]: Reached target Slices.
[    8.368098] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.368889] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.369015] systemd[1]: Created slice system-dhcpcd.slice.
[    8.514724] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 153 (systemd-binfmt)
[    8.515458] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    8.584975] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.612127] vboxdrv: Found 4 processor cores
[    8.631286] vboxdrv: TSC mode is Invariant, tentative frequency 2394559383 Hz
[    8.631289] vboxdrv: Successfully loaded version 5.0.12_OSE (interface 0x00240000)
[    8.660636] systemd[1]: Started Setup Virtual Console.
[    8.675174] systemd[1]: Mounted POSIX Message Queue File System.
[    8.678639] systemd[1]: Mounted Huge Pages File System.
[    8.693255] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    8.693297] systemd[1]: Mounted Debug File System.
[    8.693302] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    8.694324] systemd[1]: Mounted Temporary Directory.
[    8.694853] systemd[1]: Started Remount Root and Kernel File Systems.
[    8.695767] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.696432] systemd[1]: Starting Load/Save Random Seed...
[    8.705028] VBoxNetAdp: Successfully started.
[    8.757005] systemd[1]: Starting udev Coldplug all Devices...
[    8.758160] systemd[1]: Started Set Up Additional Binary Formats.
[    8.835613] systemd[1]: Started Load/Save Random Seed.
[    8.887187] VBoxNetFlt: Successfully started.
[    8.910154] VBoxPciLinuxInit
[    8.968487] vboxpci: IOMMU not found (not registered)
[    8.968947] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    8.969424] systemd[1]: Failed to start Load Kernel Modules.
[    8.972433] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[    8.972444] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[    8.974861] systemd[1]: Starting Apply Kernel Variables...
[    8.976573] systemd[1]: Mounting Configuration File System...
[    8.994867] systemd[1]: Mounted Configuration File System.
[    9.050139] systemd[1]: Started Apply Kernel Variables.
[    9.474401] systemd[1]: Started udev Coldplug all Devices.
[    9.494339] systemd[1]: Started Create Static Device Nodes in /dev.
[    9.496564] systemd[1]: Reached target Local File Systems (Pre).
[    9.498141] systemd[1]: Starting udev Kernel Device Manager...
[    9.793685] systemd[1]: Started Journal Service.
[    9.859556] systemd-journald[151]: Received request to flush runtime journal from PID 1
[   10.720871] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input4
[   10.720878] ACPI: Power Button [PWRB]
[   10.720974] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[   10.721017] ACPI: Lid Switch [LID0]
[   10.721084] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   10.721088] ACPI: Power Button [PWRF]
[   10.883471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.913313] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[   10.913323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.913328] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   10.913334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.913336] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   10.913341] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.913342] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   10.913346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.913348] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.957670] ACPI: AC Adapter [ACAD] (on-line)
[   11.042469] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[   11.042476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.076502] ACPI: Battery Slot [BAT1] (battery absent)
[   11.090913] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   11.256673] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:e5:2f:49]
[   11.338263] thermal LNXTHERM:00: registered as thermal_zone0
[   11.338267] ACPI: Thermal Zone [TZ00] (41 C)
[   11.441458] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[   11.522416] [drm] Initialized drm 1.1.0 20060810
[   11.620166] [drm] Memory usable by graphics device = 2048M
[   11.620171] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[   11.620172] fb: switching to inteldrmfb from VESA VGA
[   11.620195] Console: switching to colour dummy device 80x25
[   11.620269] [drm] Replacing VGA console driver
[   11.629090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.629094] [drm] Driver supports precise vblank timestamp query.
[   11.629190] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.648419] iTCO_vendor_support: vendor-support=0
[   11.649594] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.649709] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input10
[   11.649777] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[   11.660672] fbcon: inteldrmfb (fb0) is primary device
[   11.696725] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.696765] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   11.696912] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.757187] snd_hda_codec_conexant hdaudioC0D0: CX20757: BIOS auto-probing.
[   11.757484] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.757486] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.757487] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   11.757488] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   11.757489] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   11.757491] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[   11.757493] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[   11.758262] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   11.811784] alx 0000:01:00.0 enp1s0: renamed from eth0
[   11.917045] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.919086] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.919191] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.919295] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.024490] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[   12.024515] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[   12.404923] Console: switching to colour frame buffer device 170x48
[   12.409111] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.409115] i915 0000:00:02.0: registered panic notifier
[   12.521121] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
[   12.546788] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[   12.570412] psmouse serio1: elantech: Elan sample query result 04, 5c, 85
[   12.696306] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   12.739322] mousedev: PS/2 mouse device common for all mice
[   12.783338] intel_rapl: Found RAPL domain package
[   12.783341] intel_rapl: Found RAPL domain core
[   12.783343] intel_rapl: Found RAPL domain uncore
[   12.957033] Non-volatile memory driver v1.3
[   12.966423] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.966427] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.966429] thinkpad_acpi: ThinkPad BIOS 78CN16WW(V1.04), EC unknown
[   12.966431] thinkpad_acpi: Lenovo Lenovo G500, model 20236
[   13.015220] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   13.015278] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   13.015448] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   13.015966] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
[   13.320003] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[   14.382297] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   14.383255] alx 0000:01:00.0 enp1s0: NIC Up: 100 Mbps Full
[   14.383853] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   14.395620] media: Linux media interface: v0.10
[   14.400638] Linux video capture interface: v2.00
[   14.519702] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b3bd)
[   14.521089] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input16
[   14.521245] usbcore: registered new interface driver uvcvideo
[   14.521249] USB Video Class driver (1.1.1)
[   30.547768] fuse init (API version 7.23)

Offline

#13 2015-12-22 00:13:18

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

[    3.333328] libata version 3.00 loaded.
...
[    3.355528] ahci 0000:00:1f.2: version 3.0
[    3.355726] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
...
[    3.366678] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    3.366682] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    3.374118] scsi host0: ahci
[    3.374261] scsi host1: ahci
[    3.374382] scsi host2: ahci
[    3.374494] scsi host3: ahci
[    3.374611] scsi host4: ahci
[    3.374726] scsi host5: ahci
[    3.374797] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[    3.374800] ata2: DUMMY
[    3.374804] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[    3.374806] ata4: DUMMY
[    3.374807] ata5: DUMMY
[    3.374809] ata6: DUMMY
...
[    3.693612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.700004] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[    3.700010] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.706487] ata1.00: configured for UDMA/100
[    3.706750] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
...
[    5.918827] ata3: SATA link down (SStatus 1 SControl 300)

Somehow the link is down :S

Last edited by tom.ty89 (2015-12-22 00:18:27)

Offline

#14 2015-12-22 11:34:18

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: [SOLVED] No disc available (CD/DVD drive)

The sata link down message might not even be related, it just means nothing is connected to that port.

@Marvix
Load one distro that works and save the output of 'lsusb', then compare it with the output in arch and try to load any missing modules until the drive works.

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#15 2015-12-22 17:18:01

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

R00KIE wrote:

The sata link down message might not even be related, it just means nothing is connected to that port.

[    3.374797] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[    3.374800] ata2: DUMMY
[    3.374804] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[    3.374806] ata4: DUMMY
[    3.374807] ata5: DUMMY
[    3.374809] ata6: DUMMY
...
[    3.693612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.918827] ata3: SATA link down (SStatus 1 SControl 300)

*SIGH* Does this look clearer to you? Please read carefully.

But yes, to be 100% sure, he can boot another distro and check libata's output in dmesg there to confirm that it is the optical drive and works fine with the kernel there, and then perhaps file a bug report upstream.

Last edited by tom.ty89 (2015-12-22 17:34:10)

Offline

#16 2015-12-22 20:58:14

Archforum101
Member
Registered: 2015-12-11
Posts: 44

Re: [SOLVED] No disc available (CD/DVD drive)

Have you tried putting in a media (disk) ? If so ... still doesn't show ? You do have a disk util installed on the system ? Maybe try "ls /dev" and look for it. Finally a thought would be adding an entry for it to /etc/fstab, after creating a mount pt etc. Another oddball suggestion is see that. In particular perhaps add your user to optical group. Though note according to the arch wiki, optical is listed as one of the groups deprecated after switch to systemd and could cause conflicts/problems. Really wouldn't resort to adding an entry to fstab for this. It's just something odd being overlooked.

Not overly familiar with Arch atm and never came up against this issue myself. So beyond this possibly useless info. Good luck.

Offline

#17 2015-12-23 14:08:22

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: [SOLVED] No disc available (CD/DVD drive)

tom.ty89 wrote:
R00KIE wrote:

The sata link down message might not even be related, it just means nothing is connected to that port.

[    3.374797] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[    3.374800] ata2: DUMMY
[    3.374804] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[    3.374806] ata4: DUMMY
[    3.374807] ata5: DUMMY
[    3.374809] ata6: DUMMY
...
[    3.693612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.918827] ata3: SATA link down (SStatus 1 SControl 300)

*SIGH* Does this look clearer to you? Please read carefully.

No, it doesn't. The OP never said if the optical drive is sata or pata and assuming either could be wrong. The sata link down is normal for a port that is not connected, and given that we don't know if the optical drive is sata or not it might as well be working as intended. See example with many ports with link down

pci 0000:00:12.0: set SATA to AHCI mode
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#18 2015-12-26 02:59:46

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

R00KIE wrote:
tom.ty89 wrote:
R00KIE wrote:

The sata link down message might not even be related, it just means nothing is connected to that port.

[    3.374797] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[    3.374800] ata2: DUMMY
[    3.374804] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[    3.374806] ata4: DUMMY
[    3.374807] ata5: DUMMY
[    3.374809] ata6: DUMMY
...
[    3.693612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.918827] ata3: SATA link down (SStatus 1 SControl 300)

*SIGH* Does this look clearer to you? Please read carefully.

No, it doesn't. The OP never said if the optical drive is sata or pata and assuming either could be wrong. The sata link down is normal for a port that is not connected, and given that we don't know if the optical drive is sata or not it might as well be working as intended. See example with many ports with link down

pci 0000:00:12.0: set SATA to AHCI mode
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Heh apparently you have a special board. It clearly shows that in the OP's dmesg that unused ports are shown as "DUMMY", as in mine.

Last edited by tom.ty89 (2015-12-26 03:00:09)

Offline

#19 2015-12-26 11:12:43

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: [SOLVED] No disc available (CD/DVD drive)

In my case it is a laptop with AMD hardware but I see the same with a Gigabyte board with Intel hardware and a board with NVidia+AMD hardware. The case of dummy ports may be common but it is the first time I've noticed it.

On the other hand, the message "sata link down" makes a lot more sense for ports that are not connected than the dummy message. To me dummy means that it doesn't do anything regardless of whether you connect anything there or not, which in the case of dummy ports I would guess you can't because there is no connector on the board and most probably the chipset lacks some of the hardware needed.

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#20 2015-12-27 01:18:52

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

R00KIE wrote:

The sata link down message might not even be related, it just means nothing is connected to that port.

@Marvix
Load one distro that works and save the output of 'lsusb', then compare it with the output in arch and try to load any missing modules until the drive works.

I don't have any other distro than TAILS and one USB flash drive available.

Archforum101 wrote:

Have you tried putting in a media (disk) ? If so ... still doesn't show ? You do have a disk util installed on the system ? Maybe try "ls /dev" and look for it. Finally a thought would be adding an entry for it to /etc/fstab, after creating a mount pt etc. Another oddball suggestion is see that. In particular perhaps add your user to optical group. Though note according to the arch wiki, optical is listed as one of the groups deprecated after switch to systemd and could cause conflicts/problems. Really wouldn't resort to adding an entry to fstab for this. It's just something odd being overlooked.

Not overly familiar with Arch atm and never came up against this issue myself. So beyond this possibly useless info. Good luck.

I've insert a DVD movie and a media disk and still nothing.

The disk is installed in the /dev directory.

I've to install some dependencies and the brasero and k3b, without a positive result.

Also I've tried to create a optical group and add the user, but it didn't work.

How can I add it to the /etc/fstab?

Offline

#21 2015-12-27 07:19:59

Archforum101
Member
Registered: 2015-12-11
Posts: 44

Re: [SOLVED] No disc available (CD/DVD drive)

Would just employ the forum search option or better use google advanced search operators. ie: site:https://bbs.archlinux.org/index.php search-terms-go-here.

So you have found the designation/name of the drive ? Still not seeing why this should be such a pita but keep at it and ye shall prevail ! smile

Offline

#22 2015-12-27 07:21:32

tom.ty89
Member
Registered: 2012-11-15
Posts: 897

Re: [SOLVED] No disc available (CD/DVD drive)

It's silly to mess everything else than testing with other kernels (hence distros) if the drive is not listed in lsblk.

Offline

#23 2015-12-28 11:33:40

Marvix
Member
Registered: 2013-10-08
Posts: 146

Re: [SOLVED] No disc available (CD/DVD drive)

I don't know how but the problem is solved. I did, as I wrote before and now I can have the function on.

Thank all of you for your time and counsels.

Offline

Pages: 1

Board footer

Powered by FluxBB