[solved]CUPS not printing on Kyocera FS-1010 - filter problem

lokesh987 · 2016-01-08 11:14:27

Hello
on my system CUPS does not print to the connected printer. When printing the "Test Page" from the Web interface, the output on the paper is

ERROR: 
rangecheck
OFFENDING COMMAND:
filter
STACK:
1744893
--nostringval--
--nostringval--
5

The printer is then set to "printing error" and needs to be restarted.
The printer is detected, and visible:

lsusb |grep Kyocera
Bus 003 Device 012: ID 0482:0003 Kyocera Corp.

lpstat -a
Kyocera-FS-1010 accepting requests since Fri 08 Jan 2016 11:43:38 CET

The ppd file is working. I used a Debian Installation and a Puppix Linux installation, both come with pre-Version 2 CUPS (1.5 and 1.4.8, respectively):

*FileVersion: "8.2"
*FormatVersion: "4.3"
*LanguageEncoding: ISOLatin1 
*PCFileName: "KM1010EN.PPD"
*LanguageVersion: English
*Product: "(FS-1010)"
*PSVersion: "(2014.108) 1"
*Manufacturer: "Kyocera Mita"
*ModelName: "Kyocera Mita FS-1010"
*ShortNickName: "Kyocera Mita FS-1010"
*NickName: "Kyocera Mita FS-1010"

The error log does not give any errors (level set to "debug").
Further infos:

lpinfo -v
network socket
network https
file cups-pdf:/
network ipps
network http
network lpd
network smb
network ipp
direct usb://Kyocera/FS-1010?serial=XAL4Z42646

lpstat -s
system default destination: Kyocera-FS-1010
device for Kyocera-FS-1010: usb://Kyocera/FS-1010?serial=XAL4Z42646

echo "Hello, world!" | lpr -p

results in a correct output, but printing a text file does not.
I suspect it is due to a change when version 2 of CUPS was introduced, since older versions do work nicely without any hassle. I have seen numerous reports about corresponding troubles, but none seem to apply to my problem. If all fails might need a downgrade.
BTW, like under Debian and Puppy Linux with older CUPS versions, the printer also works flawlessly under OSX (I dont know which CUPS version there) and Windows (on different machines, not mines ).

Any ideas?
Thanks,
Lokesh

Last edited by lokesh987 (2016-01-30 17:28:23)

paulkerry · 2016-01-08 16:10:42

I don't understand what you mean by "The ppd file is working. I used a Debian Installation and a Puppix Linux installation" ?

Anyway, which driver are you using?
http://www.openprinting.org/printer/Kyo … ra-FS-1010
says you should be using "Postscript-Kyocera"

The above page links to http://www.openprinting.org/driver/Postscript-Kyocera which says...

"Note that these printers work, like all other PostScript printers, with generic PostScript PPD files, but then you will not get access to all the printer specific functionality."

so have you tried using the generic postscript driver from the cups web interface?

lokesh987 · 2016-01-11 15:24:16

Sorry, I was absent over the weekend ...

paulkerry wrote:

I don't understand what you mean by "The ppd file is working. I used a Debian Installation and a Puppix Linux installation" ?

This means that I used a Puppy Linux Live-USB Stick and the very same ppd file to connect to my printer. Puppy Linux uses CUPS version 1.4.8, while on Arch it is version 2.1.2-3. The Debian installation was on a different computer, but connected to my printer here. From both Puppy and Debian, printing worked like a charm.

paulkerry wrote:

Anyway, which driver are you using?

I tested several different, Version 8.2, 8.3, 8.4 as well as the Gutenberg. But mostly I use the one downloaded from Kyocera

so have you tried using the generic postscript driver from the cups web interface?

yes, same result.
I am struggling with this since quite a while, printing from my old iMac (which is also using CUPS). Over the time, I have tried a lot, the outcome has always been the same.

As an alternative suspicion (dont ask me why), systemd might be the troubleshooter. So I plan to install Gentoo (which does not make use of systemd) to see whether this makes a difference.

Cheers
Lokesh

paulkerry · 2016-01-11 16:44:25

OK - I get all of that thanks. The older systems you mention might be using poppler as the backend instead of ghostscript.

Your previous output...

ERROR:
rangecheck
OFFENDING COMMAND:
filter

would point to a filter problem as the print job is processed (i.e. http://www.prepressure.com/postscript/t … ors/filter ).
I'm surprised you didn't get anything when setting LogLevel to debug in cupsd.conf as each filter step is listed in the cups log. Perhaps re-enable debug and post that here?

Presumably you have ghostscript installed and other relevant packages mentioned on https://wiki.archlinux.org/index.php/CUPS ?

lokesh987 · 2016-01-12 10:18:16

Thanks for looking into this.

paulkerry wrote:

Presumably you have ghostscript installed and other relevant packages mentioned on https://wiki.archlinux.org/index.php/CUPS ?

sure I did: ghostscript-9.18-5; gsfonts-20150811; cups-pdf-2.6.1-2; and some poppler stuff (??) as well (poppler, poppler-glib; poppler-qt5

paulkerry wrote:

The older systems you mention might be using poppler as the backend instead of ghostscript.

Hmm, in your link it is recommended to switch from ghostscript to poppler, but it does not mention how. I did not find any instructions.

I checked the /var/log/cups/error_log and found some "Broken pipe" messages (no preceeding "E" for those lines, e.g. if you scroll down to the bottom.. I attach the whole log:

cat /var/log/cups/error_log
D [12/Jan/2016:11:00:03 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
I [12/Jan/2016:11:00:03 +0100] Saving job.cache...
D [12/Jan/2016:11:00:03 +0100] [Job 68] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 70] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 71] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 72] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 73] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 74] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 75] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 76] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 77] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 78] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 79] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 80] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 81] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 82] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 83] Unloading...
D [12/Jan/2016:11:00:03 +0100] [Job 84] Unloading...
D [12/Jan/2016:11:00:03 +0100] cupsdStopSelect()
I [12/Jan/2016:11:00:03 +0100] Listening to [v1.::1]:631 (IPv6)
I [12/Jan/2016:11:00:03 +0100] Listening to 127.0.0.1:631 (IPv4)
I [12/Jan/2016:11:00:03 +0100] Listening to /run/cups/cups.sock (Domain)
I [12/Jan/2016:11:00:03 +0100] Remote access is disabled.
D [12/Jan/2016:11:00:03 +0100] Added auto ServerAlias Arch_Linux
I [12/Jan/2016:11:00:03 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [12/Jan/2016:11:00:03 +0100] Using keychain "/etc/cups/ssl" for server name "Arch_Linux".
I [12/Jan/2016:11:00:03 +0100] Using default TempDir of /var/spool/cups/tmp...
I [12/Jan/2016:11:00:03 +0100] Configured for up to 100 clients.
I [12/Jan/2016:11:00:03 +0100] Allowing up to 100 client connections per host.
I [12/Jan/2016:11:00:03 +0100] Using policy "default" as the default.
I [12/Jan/2016:11:00:03 +0100] Full reload is required.
I [12/Jan/2016:11:00:03 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 49 types, 79 filters...
D [12/Jan/2016:11:00:03 +0100] Loading printer Kyocera-FS-1010...
D [12/Jan/2016:11:00:03 +0100] load_ppd: Loading /var/cache/cups/Kyocera-FS-1010.data...
D [12/Jan/2016:11:00:03 +0100] cupsdRegisterPrinter(p=0x55e9bf676e90(Kyocera-FS-1010))
D [12/Jan/2016:11:00:03 +0100] Loading printer Virtual_PDF_Printer...
D [12/Jan/2016:11:00:03 +0100] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.data...
D [12/Jan/2016:11:00:03 +0100] cupsdRegisterPrinter(p=0x55e9bf67a8a0(Virtual_PDF_Printer))
I [12/Jan/2016:11:00:03 +0100] Loading job cache file "/var/cache/cups/job.cache"...
D [12/Jan/2016:11:00:03 +0100] [Job 68] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 69] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 70] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 71] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 72] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 73] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 74] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 75] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 76] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 77] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 78] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 79] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 80] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 81] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 82] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 83] Loading from cache...
D [12/Jan/2016:11:00:03 +0100] [Job 84] Loading from cache...
I [12/Jan/2016:11:00:03 +0100] Full reload complete.
D [12/Jan/2016:11:00:03 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [12/Jan/2016:11:00:03 +0100] Cleaning out old files in "/var/spool/cups/tmp".
D [12/Jan/2016:11:00:03 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [12/Jan/2016:11:00:03 +0100] Cleaning out old files in "/var/cache/cups".
D [12/Jan/2016:11:00:03 +0100] service_checkin: pid=14718
D [12/Jan/2016:11:00:03 +0100] service_checkin: 1 listeners.
D [12/Jan/2016:11:00:03 +0100] service_checkin: Listener #1 at fd 3, "/run/cups/cups.sock".
D [12/Jan/2016:11:00:03 +0100] service_checkin: Matched existing listener #1 to /run/cups/cups.sock.
D [12/Jan/2016:11:00:03 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
D [12/Jan/2016:11:00:03 +0100] Calling FindDeviceById(cups-Kyocera-FS-1010)
D [12/Jan/2016:11:00:03 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Kyocera-FS-1010\' does not exist
D [12/Jan/2016:11:00:03 +0100] Using profile ID "Kyocera-FS-1010-Gray..".
D [12/Jan/2016:11:00:03 +0100] Calling CreateProfile(Kyocera-FS-1010-Gray..,temp)
D [12/Jan/2016:11:00:03 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__".
I [12/Jan/2016:11:00:03 +0100] Registering ICC color profiles for "Kyocera-FS-1010".
D [12/Jan/2016:11:00:03 +0100] Calling CreateDevice(cups-Kyocera-FS-1010,temp)
D [12/Jan/2016:11:00:03 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010".
D [12/Jan/2016:11:00:03 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010:AddProfile(/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__) [soft]
D [12/Jan/2016:11:00:03 +0100] Calling FindDeviceById(cups-Virtual_PDF_Printer)
D [12/Jan/2016:11:00:03 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Virtual_PDF_Printer\' does not exist
D [12/Jan/2016:11:00:03 +0100] Using profile ID "Virtual_PDF_Printer-Gray..".
D [12/Jan/2016:11:00:03 +0100] Calling CreateProfile(Virtual_PDF_Printer-Gray..,temp)
D [12/Jan/2016:11:00:03 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__".
D [12/Jan/2016:11:00:03 +0100] Using profile ID "Virtual_PDF_Printer-RGB..".
D [12/Jan/2016:11:00:03 +0100] Calling CreateProfile(Virtual_PDF_Printer-RGB..,temp)
D [12/Jan/2016:11:00:03 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__".
I [12/Jan/2016:11:00:03 +0100] Registering ICC color profiles for "Virtual_PDF_Printer".
D [12/Jan/2016:11:00:03 +0100] Calling CreateDevice(cups-Virtual_PDF_Printer,temp)
D [12/Jan/2016:11:00:03 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer".
D [12/Jan/2016:11:00:03 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__) [soft]
D [12/Jan/2016:11:00:03 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__) [soft]
I [12/Jan/2016:11:00:03 +0100] Listening to [v1.::1]:631 on fd 11...
I [12/Jan/2016:11:00:03 +0100] Listening to 127.0.0.1:631 on fd 12...
I [12/Jan/2016:11:00:03 +0100] Listening to /run/cups/cups.sock on fd 3...
I [12/Jan/2016:11:00:03 +0100] Resuming new connection processing...
D [12/Jan/2016:11:00:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:11:00:03 +0100] cupsdAddCert: Adding certificate for PID 0
D [12/Jan/2016:11:00:03 +0100] Discarding unused server-started event...
D [12/Jan/2016:11:00:04 +0100] Report: clients=0
D [12/Jan/2016:11:00:04 +0100] Report: jobs=17
D [12/Jan/2016:11:00:04 +0100] Report: jobs-active=0
D [12/Jan/2016:11:00:04 +0100] Report: printers=2
D [12/Jan/2016:11:00:04 +0100] Report: stringpool-string-count=11771
D [12/Jan/2016:11:00:04 +0100] Report: stringpool-alloc-bytes=9448
D [12/Jan/2016:11:00:04 +0100] Report: stringpool-total-bytes=212360
D [12/Jan/2016:11:00:08 +0100] [Client 1] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:08 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] [Client 1] POST / HTTP/1.1
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 1] Read: status=200
D [12/Jan/2016:11:00:08 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:11:00:08 +0100] [Client 1] 2.0 CUPS-Get-Printers 1
D [12/Jan/2016:11:00:08 +0100] CUPS-Get-Printers
D [12/Jan/2016:11:00:08 +0100] [Client 1] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jan/2016:11:00:08 +0100] [Client 1] Content-Length: 388
D [12/Jan/2016:11:00:08 +0100] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:11:00:08 +0100] [Client 1] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=388, response=0x55e9bf77ee10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:11:00:08 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:11:00:08 +0100] [Client 1] bytes=0, http_state=0, data_remaining=388
D [12/Jan/2016:11:00:08 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:11:00:08 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:11:00:08 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:11:00:08 +0100] [Client 1] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:08 +0100] [Client 1] Closing connection.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 2] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:08 +0100] [Client 2] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] [Client 2] POST /admin/ HTTP/1.1
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 2] Read: status=200
D [12/Jan/2016:11:00:08 +0100] [Client 2] No authentication data provided.
D [12/Jan/2016:11:00:08 +0100] [Client 2] 2.0 Pause-Printer 2
D [12/Jan/2016:11:00:08 +0100] Pause-Printer ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:11:00:08 +0100] cupsdIsAuthorized: username=""
D [12/Jan/2016:11:00:08 +0100] [Client 2] Returning HTTP Unauthorized for Pause-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:11:00:08 +0100] [Client 2] cupsdSendHeader: code=401, type="text/html", auth_type=1
D [12/Jan/2016:11:00:08 +0100] [Client 2] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [12/Jan/2016:11:00:08 +0100] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:08 +0100] [Client 2] Closing connection.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:11:00:08 +0100] [Client 3] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:08 +0100] [Client 3] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] [Client 4] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:08 +0100] [Client 4] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:08 +0100] [Client 3] Closing connection.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 5] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:08 +0100] [Client 5] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:08 +0100] [Client 4] Closing connection.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 5] POST /admin/ HTTP/1.1
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:11:00:08 +0100] [Client 5] Read: status=200
D [12/Jan/2016:11:00:08 +0100] [Client 5] Authorized as root using PeerCred.
D [12/Jan/2016:11:00:08 +0100] [Client 5] 2.0 Pause-Printer 2
D [12/Jan/2016:11:00:08 +0100] Pause-Printer ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:11:00:08 +0100] cupsdIsAuthorized: username="root"
D [12/Jan/2016:11:00:08 +0100] Discarding unused printer-stopped event...
D [12/Jan/2016:11:00:08 +0100] cupsdMarkDirty(P----)
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [12/Jan/2016:11:00:08 +0100] cupsdRegisterPrinter(p=0x55e9bf676e90(Kyocera-FS-1010))
D [12/Jan/2016:11:00:08 +0100] cupsdMarkDirty(P----)
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jan/2016:11:00:08 +0100] Printer "Kyocera-FS-1010" stopped by "root".
D [12/Jan/2016:11:00:08 +0100] [Client 5] Returning IPP successful-ok for Pause-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:11:00:08 +0100] [Client 5] Content-Length: 75
D [12/Jan/2016:11:00:08 +0100] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:11:00:08 +0100] [Client 5] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:08 +0100] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55e9bf77ec50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:11:00:08 +0100] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:11:00:08 +0100] [Client 5] bytes=0, http_state=0, data_remaining=75
D [12/Jan/2016:11:00:08 +0100] [Client 5] Flushing write buffer.
D [12/Jan/2016:11:00:08 +0100] [Client 5] New state is HTTP_STATE_WAITING
D [12/Jan/2016:11:00:08 +0100] [Client 5] Waiting for request.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:08 +0100] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:08 +0100] [Client 5] Closing connection.
D [12/Jan/2016:11:00:08 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 6] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 6] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 6] POST / HTTP/1.1
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 6] Read: status=200
D [12/Jan/2016:11:00:28 +0100] [Client 6] No authentication data provided.
D [12/Jan/2016:11:00:28 +0100] [Client 6] 2.0 CUPS-Get-Devices 1
D [12/Jan/2016:11:00:28 +0100] CUPS-Get-Devices
D [12/Jan/2016:11:00:28 +0100] cupsdIsAuthorized: username=""
D [12/Jan/2016:11:00:28 +0100] [Client 6] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [12/Jan/2016:11:00:28 +0100] [Client 6] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [12/Jan/2016:11:00:28 +0100] [Client 6] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [12/Jan/2016:11:00:28 +0100] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 6] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 7] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 7] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 8] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 8] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 7] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 9] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 8] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 9] POST / HTTP/1.1
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 9] Read: status=200
D [12/Jan/2016:11:00:28 +0100] [Client 9] Authorized as root using PeerCred.
D [12/Jan/2016:11:00:28 +0100] [Client 9] 2.0 CUPS-Get-Devices 1
D [12/Jan/2016:11:00:28 +0100] CUPS-Get-Devices
D [12/Jan/2016:11:00:28 +0100] cupsdIsAuthorized: username="root"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[1] = "1"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[2] = "0"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[3] = "2"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[4] = "2"
D [12/Jan/2016:11:00:28 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes=\'beh\',\'cups-pdf\',\'bluetooth\',\'dnssd\',\'http\',\'https\',\'ipp\',\'lpd\',\'ncp\',\'parallel\',\'scsi\',\'smb\',\'snmp\',\'socket\'"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[18] = "AUTH_TYPE=PeerCred"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[19] = "LANG=en_GB.UTF8"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[24] = "REMOTE_ADDR=localhost"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[26] = "SCRIPT_NAME=/"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[28] = "REMOTE_USER=root"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=CUPS/2.1.2 (Linux 4.3.3-2-ARCH; x86_64) IPP/2.0"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[32] = "CONTENT_LENGTH=244"
D [12/Jan/2016:11:00:28 +0100] [CGI] envp[33] = "CONTENT_TYPE=application/ipp"
D [12/Jan/2016:11:00:28 +0100] cupsdAddCert: Adding certificate for PID 14822
D [12/Jan/2016:11:00:28 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 14822)
I [12/Jan/2016:11:00:28 +0100] [Client 9] Started "/usr/lib/cups/daemon/cups-deviced" (pid=14822, file=16)
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 14823)
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 14824)
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 14825)
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 14826)
D [12/Jan/2016:11:00:28 +0100] [Client 9] CGI data ready to be sent.
D [12/Jan/2016:11:00:28 +0100] [CGI] Flushed attributes...
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Found device \"ipps\"...
D [12/Jan/2016:11:00:28 +0100] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [Client 9] Script header: Content-Type: application/ipp
D [12/Jan/2016:11:00:28 +0100] [Client 9] Script header: 
D [12/Jan/2016:11:00:28 +0100] [Client 9] Sending status 200 for CGI.
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [CGI] Loaded 77 quirks.
D [12/Jan/2016:11:00:28 +0100] [CGI] list_devices
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] PID 14823 (ipps) exited with no errors.
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] PID 14826 (implicitclass) exited with no errors.
D [12/Jan/2016:11:00:28 +0100] [CGI] libusb_get_device_list=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] CGI data ready to be sent.
D [12/Jan/2016:11:00:28 +0100] [CGI] Flushed attributes...
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] Found device \"usb://Kyocera/FS-1010?serial=XAL4Z42646\"...
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] PID 14825 (serial) exited with no errors.
D [12/Jan/2016:11:00:28 +0100] [cups-deviced] PID 14824 (usb) exited with no errors.
D [12/Jan/2016:11:00:28 +0100] [Client 9] CGI data ready to be sent.
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [Client 9] CGI data ready to be sent.
D [12/Jan/2016:11:00:28 +0100] PID 14822 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [12/Jan/2016:11:00:28 +0100] [Client 9] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=14822, file=16
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for CGI data.
D [12/Jan/2016:11:00:28 +0100] [Client 9] Sending 0-length chunk.
D [12/Jan/2016:11:00:28 +0100] [Client 9] Flushing write buffer.
D [12/Jan/2016:11:00:28 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [12/Jan/2016:11:00:28 +0100] [Client 9] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 9] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 10] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 10] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 10] POST / HTTP/1.1
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 10] Read: status=200
D [12/Jan/2016:11:00:28 +0100] [Client 10] No authentication data provided.
D [12/Jan/2016:11:00:28 +0100] [Client 10] 2.0 CUPS-Get-Printers 2
D [12/Jan/2016:11:00:28 +0100] CUPS-Get-Printers
D [12/Jan/2016:11:00:28 +0100] [Client 10] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jan/2016:11:00:28 +0100] [Client 10] Content-Length: 411
D [12/Jan/2016:11:00:28 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:11:00:28 +0100] [Client 10] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x55e9bf77f670(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:11:00:28 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:11:00:28 +0100] [Client 10] bytes=0, http_state=0, data_remaining=411
D [12/Jan/2016:11:00:28 +0100] [Client 10] Flushing write buffer.
D [12/Jan/2016:11:00:28 +0100] [Client 10] New state is HTTP_STATE_WAITING
D [12/Jan/2016:11:00:28 +0100] [Client 10] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 10] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 11] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 11] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 11] POST /admin/ HTTP/1.1
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 11] Read: status=200
D [12/Jan/2016:11:00:28 +0100] [Client 11] No authentication data provided.
D [12/Jan/2016:11:00:28 +0100] [Client 11] 2.0 Resume-Printer 3
D [12/Jan/2016:11:00:28 +0100] Resume-Printer ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:11:00:28 +0100] cupsdIsAuthorized: username=""
D [12/Jan/2016:11:00:28 +0100] [Client 11] Returning HTTP Unauthorized for Resume-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:11:00:28 +0100] [Client 11] cupsdSendHeader: code=401, type="text/html", auth_type=1
D [12/Jan/2016:11:00:28 +0100] [Client 11] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [12/Jan/2016:11:00:28 +0100] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 11] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 12] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 12] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 13] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 13] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 12] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 12] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 14] Accepted from localhost (Domain)
D [12/Jan/2016:11:00:28 +0100] [Client 14] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 13] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 14] POST /admin/ HTTP/1.1
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 14] Read: status=200
D [12/Jan/2016:11:00:28 +0100] [Client 14] Authorized as root using PeerCred.
D [12/Jan/2016:11:00:28 +0100] [Client 14] 2.0 Resume-Printer 3
D [12/Jan/2016:11:00:28 +0100] Resume-Printer ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:11:00:28 +0100] cupsdIsAuthorized: username="root"
D [12/Jan/2016:11:00:28 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:11:00:28 +0100] cupsdMarkDirty(P----)
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] cupsdRegisterPrinter(p=0x55e9bf676e90(Kyocera-FS-1010))
D [12/Jan/2016:11:00:28 +0100] cupsdMarkDirty(P----)
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jan/2016:11:00:28 +0100] Printer "Kyocera-FS-1010" started by "root".
D [12/Jan/2016:11:00:28 +0100] [Client 14] Returning IPP successful-ok for Resume-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:11:00:28 +0100] [Client 14] Content-Length: 75
D [12/Jan/2016:11:00:28 +0100] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:11:00:28 +0100] [Client 14] con->http=0x55e9bf77fa40
D [12/Jan/2016:11:00:28 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55e9bf68a470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:11:00:28 +0100] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:11:00:28 +0100] [Client 14] bytes=0, http_state=0, data_remaining=75
D [12/Jan/2016:11:00:28 +0100] [Client 14] Flushing write buffer.
D [12/Jan/2016:11:00:28 +0100] [Client 14] New state is HTTP_STATE_WAITING
D [12/Jan/2016:11:00:28 +0100] [Client 14] Waiting for request.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:11:00:28 +0100] [Client 14] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:11:00:28 +0100] [Client 14] Closing connection.
D [12/Jan/2016:11:00:28 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [12/Jan/2016:11:00:39 +0100] Saving printers.conf...
D [12/Jan/2016:11:00:39 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"

Sorry that this is getting quite lengthy.

Docbroke · 2016-01-12 11:00:11

lokesh987 wrote:

Hmm, in your link it is recommended to switch from ghostscript to poppler, but it does not mention how. I did not find any instructions.

Poppler is required by cups-filters, where ghostscript is optional, and cups-pdf requires ghostscript. So you should have both installed.

paulkerry · 2016-01-12 12:18:42

lokesh987 wrote:

Sorry that this is getting quite lengthy.

Unfortunately it's not lengthy enough! It would be useful to have the lines from that log when you send a job and it fails...

lokesh987 · 2016-01-12 13:02:34

paulkerry wrote:

[Unfortunately it's not lengthy enough! It would be useful to have the lines from that log when you send a job and it fails...

This is the entire text from /var/log/cups/error_log?!

So I did the following:

mv /var/log/cups/* /var/log/cups/old_logs/
systemctl stop org.cups.cupsd.service
systemctl start org.cups.cupsd.service

Then I went to http://localhost:631/printers/Kyocera-FS-1010, Tab "Maintenance", and selected "Print Test Page".
The new logs found under /var/log/cups/ are presented here (no cuts):

/var/log/cups/access_log
localhost - - [12/Jan/2016:13:40:14 +0100] "POST /printers/Kyocera-FS-1010 HTTP/1.1" 200 391 Print-Job successful-ok

/var/log/cups/page_log
Kyocera-FS-1010 anonymous 85 [12/Jan/2016:13:40:16 +0100] 1 1 - localhost Test Page - -

/var/log/cups/error_log
D [12/Jan/2016:13:39:19 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
I [12/Jan/2016:13:39:19 +0100] Saving job.cache...
D [12/Jan/2016:13:39:19 +0100] cupsdStopSelect()
I [12/Jan/2016:13:39:27 +0100] Listening to [v1.::1]:631 (IPv6)
I [12/Jan/2016:13:39:27 +0100] Listening to 127.0.0.1:631 (IPv4)
I [12/Jan/2016:13:39:27 +0100] Listening to /run/cups/cups.sock (Domain)
I [12/Jan/2016:13:39:27 +0100] Remote access is disabled.
D [12/Jan/2016:13:39:27 +0100] Added auto ServerAlias Arch_Linux
I [12/Jan/2016:13:39:27 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [12/Jan/2016:13:39:27 +0100] Using keychain "/etc/cups/ssl" for server name "Arch_Linux".
I [12/Jan/2016:13:39:27 +0100] Using default TempDir of /var/spool/cups/tmp...
I [12/Jan/2016:13:39:27 +0100] Configured for up to 100 clients.
I [12/Jan/2016:13:39:27 +0100] Allowing up to 100 client connections per host.
I [12/Jan/2016:13:39:27 +0100] Using policy "default" as the default.
I [12/Jan/2016:13:39:27 +0100] Full reload is required.
I [12/Jan/2016:13:39:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 49 types, 79 filters...
D [12/Jan/2016:13:39:27 +0100] Loading printer Kyocera-FS-1010...
D [12/Jan/2016:13:39:27 +0100] load_ppd: Loading /var/cache/cups/Kyocera-FS-1010.data...
D [12/Jan/2016:13:39:27 +0100] cupsdRegisterPrinter(p=0x5652a4c39e90(Kyocera-FS-1010))
D [12/Jan/2016:13:39:27 +0100] Loading printer Virtual_PDF_Printer...
D [12/Jan/2016:13:39:27 +0100] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.data...
D [12/Jan/2016:13:39:27 +0100] cupsdRegisterPrinter(p=0x5652a4c3d8a0(Virtual_PDF_Printer))
I [12/Jan/2016:13:39:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
D [12/Jan/2016:13:39:27 +0100] [Job 68] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 69] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 70] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 71] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 72] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 73] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 74] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 75] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 76] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 77] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 78] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 79] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 80] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 81] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 82] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 83] Loading from cache...
D [12/Jan/2016:13:39:27 +0100] [Job 84] Loading from cache...
I [12/Jan/2016:13:39:27 +0100] Full reload complete.
D [12/Jan/2016:13:39:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [12/Jan/2016:13:39:27 +0100] Cleaning out old files in "/var/spool/cups/tmp".
D [12/Jan/2016:13:39:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [12/Jan/2016:13:39:27 +0100] Cleaning out old files in "/var/cache/cups".
D [12/Jan/2016:13:39:27 +0100] service_checkin: pid=32367
D [12/Jan/2016:13:39:27 +0100] service_checkin: 1 listeners.
D [12/Jan/2016:13:39:27 +0100] service_checkin: Listener #1 at fd 3, "/run/cups/cups.sock".
D [12/Jan/2016:13:39:27 +0100] service_checkin: Matched existing listener #1 to /run/cups/cups.sock.
D [12/Jan/2016:13:39:27 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
D [12/Jan/2016:13:39:27 +0100] Calling FindDeviceById(cups-Kyocera-FS-1010)
D [12/Jan/2016:13:39:27 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Kyocera-FS-1010\' does not exist
D [12/Jan/2016:13:39:27 +0100] Using profile ID "Kyocera-FS-1010-Gray..".
D [12/Jan/2016:13:39:27 +0100] Calling CreateProfile(Kyocera-FS-1010-Gray..,temp)
D [12/Jan/2016:13:39:27 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__".
I [12/Jan/2016:13:39:27 +0100] Registering ICC color profiles for "Kyocera-FS-1010".
D [12/Jan/2016:13:39:27 +0100] Calling CreateDevice(cups-Kyocera-FS-1010,temp)
D [12/Jan/2016:13:39:27 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010".
D [12/Jan/2016:13:39:27 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010:AddProfile(/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__) [soft]
D [12/Jan/2016:13:39:27 +0100] Calling FindDeviceById(cups-Virtual_PDF_Printer)
D [12/Jan/2016:13:39:27 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Virtual_PDF_Printer\' does not exist
D [12/Jan/2016:13:39:27 +0100] Using profile ID "Virtual_PDF_Printer-Gray..".
D [12/Jan/2016:13:39:27 +0100] Calling CreateProfile(Virtual_PDF_Printer-Gray..,temp)
D [12/Jan/2016:13:39:27 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__".
D [12/Jan/2016:13:39:27 +0100] Using profile ID "Virtual_PDF_Printer-RGB..".
D [12/Jan/2016:13:39:27 +0100] Calling CreateProfile(Virtual_PDF_Printer-RGB..,temp)
D [12/Jan/2016:13:39:27 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__".
I [12/Jan/2016:13:39:27 +0100] Registering ICC color profiles for "Virtual_PDF_Printer".
D [12/Jan/2016:13:39:27 +0100] Calling CreateDevice(cups-Virtual_PDF_Printer,temp)
D [12/Jan/2016:13:39:27 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer".
D [12/Jan/2016:13:39:27 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__) [soft]
D [12/Jan/2016:13:39:27 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__) [soft]
I [12/Jan/2016:13:39:27 +0100] Listening to [v1.::1]:631 on fd 11...
I [12/Jan/2016:13:39:27 +0100] Listening to 127.0.0.1:631 on fd 12...
I [12/Jan/2016:13:39:27 +0100] Listening to /run/cups/cups.sock on fd 3...
I [12/Jan/2016:13:39:27 +0100] Resuming new connection processing...
D [12/Jan/2016:13:39:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:13:39:27 +0100] cupsdAddCert: Adding certificate for PID 0
D [12/Jan/2016:13:39:27 +0100] Discarding unused server-started event...
D [12/Jan/2016:13:39:28 +0100] Report: clients=0
D [12/Jan/2016:13:39:28 +0100] Report: jobs=17
D [12/Jan/2016:13:39:28 +0100] Report: jobs-active=0
D [12/Jan/2016:13:39:28 +0100] Report: printers=2
D [12/Jan/2016:13:39:28 +0100] Report: stringpool-string-count=11771
D [12/Jan/2016:13:39:28 +0100] Report: stringpool-alloc-bytes=9448
D [12/Jan/2016:13:39:28 +0100] Report: stringpool-total-bytes=212360
I [12/Jan/2016:13:39:32 +0100] Scheduler shutting down normally.
D [12/Jan/2016:13:39:32 +0100] Discarding unused server-stopped event...
D [12/Jan/2016:13:39:32 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
I [12/Jan/2016:13:39:32 +0100] Saving job.cache...
D [12/Jan/2016:13:39:32 +0100] cupsdStopSelect()
I [12/Jan/2016:13:39:45 +0100] Listening to [v1.::1]:631 (IPv6)
I [12/Jan/2016:13:39:45 +0100] Listening to 127.0.0.1:631 (IPv4)
I [12/Jan/2016:13:39:45 +0100] Listening to /run/cups/cups.sock (Domain)
I [12/Jan/2016:13:39:45 +0100] Remote access is disabled.
D [12/Jan/2016:13:39:45 +0100] Added auto ServerAlias Arch_Linux
I [12/Jan/2016:13:39:45 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [12/Jan/2016:13:39:45 +0100] Using keychain "/etc/cups/ssl" for server name "Arch_Linux".
I [12/Jan/2016:13:39:45 +0100] Using default TempDir of /var/spool/cups/tmp...
I [12/Jan/2016:13:39:45 +0100] Configured for up to 100 clients.
I [12/Jan/2016:13:39:45 +0100] Allowing up to 100 client connections per host.
I [12/Jan/2016:13:39:45 +0100] Using policy "default" as the default.
I [12/Jan/2016:13:39:45 +0100] Full reload is required.
I [12/Jan/2016:13:39:45 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 49 types, 79 filters...
D [12/Jan/2016:13:39:45 +0100] Loading printer Kyocera-FS-1010...
D [12/Jan/2016:13:39:45 +0100] load_ppd: Loading /var/cache/cups/Kyocera-FS-1010.data...
D [12/Jan/2016:13:39:45 +0100] cupsdRegisterPrinter(p=0x55a382fdfe90(Kyocera-FS-1010))
D [12/Jan/2016:13:39:45 +0100] Loading printer Virtual_PDF_Printer...
D [12/Jan/2016:13:39:45 +0100] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.data...
D [12/Jan/2016:13:39:45 +0100] cupsdRegisterPrinter(p=0x55a382fe38a0(Virtual_PDF_Printer))
I [12/Jan/2016:13:39:45 +0100] Loading job cache file "/var/cache/cups/job.cache"...
D [12/Jan/2016:13:39:45 +0100] [Job 68] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 69] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 70] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 71] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 72] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 73] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 74] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 75] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 76] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 77] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 78] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 79] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 80] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 81] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 82] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 83] Loading from cache...
D [12/Jan/2016:13:39:45 +0100] [Job 84] Loading from cache...
I [12/Jan/2016:13:39:45 +0100] Full reload complete.
D [12/Jan/2016:13:39:45 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [12/Jan/2016:13:39:45 +0100] Cleaning out old files in "/var/spool/cups/tmp".
D [12/Jan/2016:13:39:45 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [12/Jan/2016:13:39:45 +0100] Cleaning out old files in "/var/cache/cups".
D [12/Jan/2016:13:39:45 +0100] service_checkin: pid=32404
D [12/Jan/2016:13:39:45 +0100] service_checkin: 1 listeners.
D [12/Jan/2016:13:39:45 +0100] service_checkin: Listener #1 at fd 3, "/run/cups/cups.sock".
D [12/Jan/2016:13:39:45 +0100] service_checkin: Matched existing listener #1 to /run/cups/cups.sock.
D [12/Jan/2016:13:39:45 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
D [12/Jan/2016:13:39:45 +0100] Calling FindDeviceById(cups-Kyocera-FS-1010)
D [12/Jan/2016:13:39:45 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Kyocera-FS-1010\' does not exist
D [12/Jan/2016:13:39:45 +0100] Using profile ID "Kyocera-FS-1010-Gray..".
D [12/Jan/2016:13:39:45 +0100] Calling CreateProfile(Kyocera-FS-1010-Gray..,temp)
D [12/Jan/2016:13:39:45 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__".
I [12/Jan/2016:13:39:45 +0100] Registering ICC color profiles for "Kyocera-FS-1010".
D [12/Jan/2016:13:39:45 +0100] Calling CreateDevice(cups-Kyocera-FS-1010,temp)
D [12/Jan/2016:13:39:45 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010".
D [12/Jan/2016:13:39:45 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Kyocera_FS_1010:AddProfile(/org/freedesktop/ColorManager/profiles/Kyocera_FS_1010_Gray__) [soft]
D [12/Jan/2016:13:39:45 +0100] Calling FindDeviceById(cups-Virtual_PDF_Printer)
D [12/Jan/2016:13:39:45 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Virtual_PDF_Printer\' does not exist
D [12/Jan/2016:13:39:45 +0100] Using profile ID "Virtual_PDF_Printer-Gray..".
D [12/Jan/2016:13:39:45 +0100] Calling CreateProfile(Virtual_PDF_Printer-Gray..,temp)
D [12/Jan/2016:13:39:45 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__".
D [12/Jan/2016:13:39:45 +0100] Using profile ID "Virtual_PDF_Printer-RGB..".
D [12/Jan/2016:13:39:45 +0100] Calling CreateProfile(Virtual_PDF_Printer-RGB..,temp)
D [12/Jan/2016:13:39:45 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__".
I [12/Jan/2016:13:39:45 +0100] Registering ICC color profiles for "Virtual_PDF_Printer".
D [12/Jan/2016:13:39:45 +0100] Calling CreateDevice(cups-Virtual_PDF_Printer,temp)
D [12/Jan/2016:13:39:45 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer".
D [12/Jan/2016:13:39:45 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_Gray__) [soft]
D [12/Jan/2016:13:39:45 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Virtual_PDF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/Virtual_PDF_Printer_RGB__) [soft]
I [12/Jan/2016:13:39:45 +0100] Listening to [v1.::1]:631 on fd 11...
I [12/Jan/2016:13:39:45 +0100] Listening to 127.0.0.1:631 on fd 12...
I [12/Jan/2016:13:39:45 +0100] Listening to /run/cups/cups.sock on fd 3...
I [12/Jan/2016:13:39:45 +0100] Resuming new connection processing...
D [12/Jan/2016:13:39:45 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:13:39:45 +0100] cupsdAddCert: Adding certificate for PID 0
D [12/Jan/2016:13:39:45 +0100] Discarding unused server-started event...
D [12/Jan/2016:13:39:46 +0100] Report: clients=0
D [12/Jan/2016:13:39:46 +0100] Report: jobs=17
D [12/Jan/2016:13:39:46 +0100] Report: jobs-active=0
D [12/Jan/2016:13:39:46 +0100] Report: printers=2
D [12/Jan/2016:13:39:46 +0100] Report: stringpool-string-count=11771
D [12/Jan/2016:13:39:46 +0100] Report: stringpool-alloc-bytes=9448
D [12/Jan/2016:13:39:46 +0100] Report: stringpool-total-bytes=212360
D [12/Jan/2016:13:39:58 +0100] [Client 1] Accepted from localhost:48928 (IPv6)
D [12/Jan/2016:13:39:58 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:39:58 +0100] [Client 1] GET / HTTP/1.1
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:39:58 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:39:58 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:39:58 +0100] [Client 1] Processing GET /
D [12/Jan/2016:13:39:58 +0100] [Client 1] filename="/usr/share/cups/doc/index.html", type=text/html
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdSendHeader: code=200, type="text/html", auth_type=0
D [12/Jan/2016:13:39:58 +0100] [Client 1] Sending file.
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2361, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2361, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:39:58 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:39:58 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:39:58 +0100] [Client 1] GET /cups.css HTTP/1.1
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:39:58 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:39:58 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:39:58 +0100] [Client 1] Processing GET /cups.css
D [12/Jan/2016:13:39:58 +0100] [Client 1] filename="/usr/share/cups/doc/cups.css", type=text/css
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdSendHeader: code=200, type="text/css", auth_type=0
D [12/Jan/2016:13:39:58 +0100] [Client 1] Sending file.
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:39:58 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:39:58 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:39:58 +0100] [Client 1] GET /apple-touch-icon.png HTTP/1.1
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:39:58 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:39:58 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:39:58 +0100] [Client 1] Processing GET /apple-touch-icon.png
D [12/Jan/2016:13:39:58 +0100] [Client 1] filename="/usr/share/cups/doc/apple-touch-icon.png", type=image/png
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdSendHeader: code=200, type="image/png", auth_type=0
D [12/Jan/2016:13:39:58 +0100] [Client 1] Sending file.
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=6139, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=6139, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:39:58 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=6139, response=(nil)(), pipe_pid=0, file=16
D [12/Jan/2016:13:39:58 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:39:58 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:39:58 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:39:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:40:05 +0100] [Client 1] GET /admin HTTP/1.1
D [12/Jan/2016:13:40:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:40:05 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:05 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:05 +0100] [Client 1] Processing GET /admin
D [12/Jan/2016:13:40:05 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[27] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[28] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[30] = "HTTP_REFERER=http://localhost:631/"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[31] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:05 +0100] [CGI] envp[32] = "QUERY_STRING="
D [12/Jan/2016:13:40:05 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 32454)
I [12/Jan/2016:13:40:05 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32454, file=16)
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [CGI] admin.cgi started...
D [12/Jan/2016:13:40:05 +0100] [Client 2] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:05 +0100] [Client 2] Waiting for request.
D [12/Jan/2016:13:40:05 +0100] [CGI] http=0x564406ebfaa0
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: SECTION=\"admin\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:05 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:05 +0100] [CGI] No form data, showing main menu...
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: DEBUG_LOGGING=\"CHECKED\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: HAVE_GSSAPI=\"1\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: KERBEROS=\"\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: PRESERVE_JOBS=\"CHECKED\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: PRESERVE_JOB_HISTORY=\"Yes\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: PRESERVE_JOB_FILES=\"1d\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: MAX_CLIENTS=\"100\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: MAX_JOBS=\"500\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: MAX_LOG_SIZE=\"0\"
D [12/Jan/2016:13:40:05 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [12/Jan/2016:13:40:05 +0100] [Client 2] POST / HTTP/1.1
D [12/Jan/2016:13:40:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:05 +0100] [Client 2] Read: status=200
D [12/Jan/2016:13:40:05 +0100] [Client 2] No authentication data provided.
D [12/Jan/2016:13:40:05 +0100] [Client 2] Read: status=100
D [12/Jan/2016:13:40:05 +0100] [Client 2] Read: status=100
D [12/Jan/2016:13:40:05 +0100] [Client 2] Read: status=100
D [12/Jan/2016:13:40:05 +0100] [Client 2] Read: status=100
D [12/Jan/2016:13:40:05 +0100] [Client 2] 2.0 Get-Subscriptions 1
D [12/Jan/2016:13:40:05 +0100] Get-Subscriptions ipp://localhost/
D [12/Jan/2016:13:40:05 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [12/Jan/2016:13:40:05 +0100] [Client 2] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [12/Jan/2016:13:40:05 +0100] [Client 2] Content-Length: 117
D [12/Jan/2016:13:40:05 +0100] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:05 +0100] [Client 2] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:05 +0100] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=117, response=0x55a3830e8700(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:05 +0100] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:05 +0100] [Client 2] bytes=0, http_state=0, data_remaining=117
D [12/Jan/2016:13:40:05 +0100] [Client 2] Flushing write buffer.
D [12/Jan/2016:13:40:05 +0100] [Client 2] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:05 +0100] [Client 2] Waiting for request.
D [12/Jan/2016:13:40:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: TITLE=\"Administration\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:05 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:05 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:05 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:05 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:05 +0100] [Client 2] Closing connection.
D [12/Jan/2016:13:40:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:05 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:05 +0100] PID 32454 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [12/Jan/2016:13:40:05 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:05 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32454, file=16
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:05 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:05 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:05 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:05 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:05 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [Client 1] GET /printers/? HTTP/1.1
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:40:07 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:07 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:07 +0100] [Client 1] Processing GET /printers/?
D [12/Jan/2016:13:40:07 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[27] = "PATH_INFO=/"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:07 +0100] [CGI] envp[33] = "QUERY_STRING="
D [12/Jan/2016:13:40:07 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32456)
I [12/Jan/2016:13:40:07 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32456, file=16)
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:07 +0100] [Client 3] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:07 +0100] [Client 3] Waiting for request.
D [12/Jan/2016:13:40:07 +0100] [Client 3] POST / HTTP/1.1
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [Client 3] Read: status=200
D [12/Jan/2016:13:40:07 +0100] [Client 3] No authentication data provided.
D [12/Jan/2016:13:40:07 +0100] [Client 3] 2.0 CUPS-Get-Default 1
D [12/Jan/2016:13:40:07 +0100] CUPS-Get-Default
D [12/Jan/2016:13:40:07 +0100] [Client 3] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [12/Jan/2016:13:40:07 +0100] [Client 3] Content-Length: 174
D [12/Jan/2016:13:40:07 +0100] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:07 +0100] [Client 3] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:07 +0100] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55a3830e8710(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:07 +0100] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:07 +0100] [Client 3] bytes=0, http_state=0, data_remaining=174
D [12/Jan/2016:13:40:07 +0100] [Client 3] Flushing write buffer.
D [12/Jan/2016:13:40:07 +0100] [Client 3] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:07 +0100] [Client 3] Waiting for request.
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: DEFAULT_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: DEFAULT_URI=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] show_all_printers(http=0x55efeced3bf0, user=\"(null)\")
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: TITLE=\"Printers\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:07 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:07 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 3] POST / HTTP/1.1
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [Client 3] Read: status=200
D [12/Jan/2016:13:40:07 +0100] [Client 3] No authentication data provided.
D [12/Jan/2016:13:40:07 +0100] [Client 3] 2.0 CUPS-Get-Printers 2
D [12/Jan/2016:13:40:07 +0100] CUPS-Get-Printers
D [12/Jan/2016:13:40:07 +0100] [Client 3] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jan/2016:13:40:07 +0100] [Client 3] Content-Length: 606
D [12/Jan/2016:13:40:07 +0100] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 3] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:07 +0100] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=606, response=0x55a3830e88d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:07 +0100] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:07 +0100] [Client 3] bytes=0, http_state=0, data_remaining=606
D [12/Jan/2016:13:40:07 +0100] [Client 3] Flushing write buffer.
D [12/Jan/2016:13:40:07 +0100] [Client 3] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:07 +0100] [Client 3] Waiting for request.
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: TOTAL=\"2\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_state[0]=\"3\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_state_message[0]=\"\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_location[0]=\"Arch_Linux\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_info[0]=\"Kyocera FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_make_and_model[0]=\"Kyocera Mita FS-1010\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_state[1]=\"3\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_state_message[1]=\"\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: admin_uri[1]=\"/admin/\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_uri_supported[1]=\"/printers/Virtual_PDF_Printer\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_name[1]=\"Virtual_PDF_Printer\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_location[1]=\"\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_info[1]=\"Virtual PDF Printer\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetArray: printer_make_and_model[1]=\"HP Color LaserJet Series PCL 6 CUPS\"
D [12/Jan/2016:13:40:07 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/\"
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:07 +0100] [Client 3] Closing connection.
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:07 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:07 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32456, file=16
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:07 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:07 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:07 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:07 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:07 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:40:07 +0100] PID 32456 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:08 +0100] [Client 1] GET /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:40:08 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:08 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:08 +0100] [Client 1] Processing GET /printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:08 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[27] = "PATH_INFO=/Kyocera-FS-1010"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/printers/?"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:08 +0100] [CGI] envp[33] = "QUERY_STRING="
D [12/Jan/2016:13:40:08 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32460)
I [12/Jan/2016:13:40:08 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32460, file=16)
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [Client 4] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:08 +0100] [Client 4] Waiting for request.
D [12/Jan/2016:13:40:08 +0100] [Client 4] POST / HTTP/1.1
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [Client 4] Read: status=200
D [12/Jan/2016:13:40:08 +0100] [Client 4] No authentication data provided.
D [12/Jan/2016:13:40:08 +0100] [Client 4] 2.0 CUPS-Get-Default 1
D [12/Jan/2016:13:40:08 +0100] CUPS-Get-Default
D [12/Jan/2016:13:40:08 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [12/Jan/2016:13:40:08 +0100] [Client 4] Content-Length: 174
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55a3830e8710(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:08 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] bytes=0, http_state=0, data_remaining=174
D [12/Jan/2016:13:40:08 +0100] [Client 4] Flushing write buffer.
D [12/Jan/2016:13:40:08 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:08 +0100] [Client 4] Waiting for request.
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: DEFAULT_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: DEFAULT_URI=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] show_printer(http=0x5603b73e7bf0, printer=\"Kyocera-FS-1010\")
D [12/Jan/2016:13:40:08 +0100] [Client 4] POST / HTTP/1.1
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [Client 4] Read: status=200
D [12/Jan/2016:13:40:08 +0100] [Client 4] No authentication data provided.
D [12/Jan/2016:13:40:08 +0100] [Client 4] 2.0 Get-Printer-Attributes 2
D [12/Jan/2016:13:40:08 +0100] Get-Printer-Attributes ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:08 +0100] [Client 4] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:08 +0100] [Client 4] Content-Length: 659
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=659, response=0x55a3830e8590(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:08 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] bytes=0, http_state=0, data_remaining=659
D [12/Jan/2016:13:40:08 +0100] [Client 4] Flushing write buffer.
D [12/Jan/2016:13:40:08 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:08 +0100] [Client 4] Waiting for request.
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_is_shared[0]=\"0\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_state[0]=\"3\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_location[0]=\"Arch_Linux\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_info[0]=\"Kyocera FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: device_uri[0]=\"usb://Kyocera/FS-1010?serial=XAL4Z42646\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: color_supported[0]=\"0\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_make_and_model[0]=\"Kyocera Mita FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: media_default[0]=\"iso_a4_210x297mm\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: printer_commands[0]=\"AutoConfigure, Clean, PrintSelfTestPage\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"0\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: TITLE=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:08 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:08 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [CGI] Regular expression \".*Clean.*\"
D [12/Jan/2016:13:40:08 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:08 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:08 +0100] [CGI] Regular expression \".*PrintSelfTestPage.*\"
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:08 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 4] POST / HTTP/1.1
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [Client 4] Read: status=200
D [12/Jan/2016:13:40:08 +0100] [Client 4] No authentication data provided.
D [12/Jan/2016:13:40:08 +0100] [Client 4] 2.0 Get-Jobs 3
D [12/Jan/2016:13:40:08 +0100] Get-Jobs ipp://localhost:631/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:08 +0100] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:08 +0100] [Client 4] Content-Length: 75
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:08 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55a3830f84b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:08 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:08 +0100] [Client 4] bytes=0, http_state=0, data_remaining=75
D [12/Jan/2016:13:40:08 +0100] [Client 4] Flushing write buffer.
D [12/Jan/2016:13:40:08 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:08 +0100] [Client 4] Waiting for request.
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiClearVariables called.
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: ORDER=\"asc\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: TOTAL=\"0\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [CGI] cgiSetVariable: SEARCH_DEST=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:08 +0100] [Client 4] Closing connection.
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:08 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:08 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32460, file=16
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:08 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:08 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:08 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:08 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:08 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [12/Jan/2016:13:40:08 +0100] PID 32460 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:14 +0100] [Client 1] POST /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jan/2016:13:40:14 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:14 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:14 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[27] = "PATH_INFO=/Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[32] = "REQUEST_METHOD=POST"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[33] = "CONTENT_LENGTH=64"
D [12/Jan/2016:13:40:14 +0100] [CGI] envp[34] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [12/Jan/2016:13:40:14 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32467)
I [12/Jan/2016:13:40:14 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32467, file=17)
D [12/Jan/2016:13:40:14 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:14 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: org.cups.sid=\"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: OP=\"print-test-page\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:14 +0100] [Client 5] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:14 +0100] [Client 5] Waiting for request.
D [12/Jan/2016:13:40:14 +0100] [Client 5] POST /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jan/2016:13:40:14 +0100] [Client 5] Read: status=200
D [12/Jan/2016:13:40:14 +0100] [Client 5] No authentication data provided.
D [12/Jan/2016:13:40:14 +0100] [Client 5] 2.0 Print-Job 1
D [12/Jan/2016:13:40:14 +0100] Print-Job ipp://localhost:631/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:14 +0100] [Job ???] Auto-typing file...
I [12/Jan/2016:13:40:14 +0100] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [12/Jan/2016:13:40:14 +0100] Adding default job-sheets values "none,none"...
I [12/Jan/2016:13:40:14 +0100] [Job 85] Adding start banner page "none".
D [12/Jan/2016:13:40:14 +0100] Discarding unused job-created event...
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jan/2016:13:40:14 +0100] [Job 85] Adding end banner page "none".
I [12/Jan/2016:13:40:14 +0100] [Job 85] File of type application/vnd.cups-pdf-banner queued by "anonymous".
D [12/Jan/2016:13:40:14 +0100] [Job 85] hold_until=0
I [12/Jan/2016:13:40:14 +0100] [Job 85] Queued on "Kyocera-FS-1010" by "anonymous".
D [12/Jan/2016:13:40:14 +0100] [Job 85] time-at-processing=1452602414
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:14 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:13:40:14 +0100] [Job 85] 4 filters for job:
D [12/Jan/2016:13:40:14 +0100] [Job 85] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [12/Jan/2016:13:40:14 +0100] [Job 85] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [12/Jan/2016:13:40:14 +0100] [Job 85] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [12/Jan/2016:13:40:14 +0100] [Job 85] - (application/vnd.cups-postscript to printer/Kyocera-FS-1010, cost 0)
D [12/Jan/2016:13:40:14 +0100] [Job 85] job-sheets=none,none
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[0]="Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[1]="85"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[2]="anonymous"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[3]="Test Page"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[4]="1"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[5]="job-uuid=urn:uuid:5d064185-f165-3a9c-5dec-d34123f84c4d job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1452602414 time-at-processing=1452602414"
D [12/Jan/2016:13:40:14 +0100] [Job 85] argv[6]="/var/spool/cups/d00085-001"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[7]="CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[10]="SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[11]="SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[13]="USER=root"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[14]="CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[17]="IPP_PORT=631"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[18]="CHARSET=utf-8"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[19]="LANG=en_GB.UTF-8"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[20]="PPD=/etc/cups/ppd/Kyocera-FS-1010.ppd"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[21]="RIP_MAX_CACHE=128m"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[23]="DEVICE_URI=usb://Kyocera/FS-1010?serial=XAL4Z42646"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[24]="PRINTER_INFO=Kyocera FS-1010"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[25]="PRINTER_LOCATION=Arch_Linux"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[26]="PRINTER=Kyocera-FS-1010"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[27]="PRINTER_STATE_REASONS=none"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[28]="CUPS_FILETYPE=document"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [12/Jan/2016:13:40:14 +0100] [Job 85] envp[30]="AUTH_I****"
I [12/Jan/2016:13:40:14 +0100] [Job 85] Started filter /usr/lib/cups/filter/bannertopdf (PID 32468)
I [12/Jan/2016:13:40:14 +0100] [Job 85] Started filter /usr/lib/cups/filter/pdftopdf (PID 32469)
I [12/Jan/2016:13:40:14 +0100] [Job 85] Started filter /usr/lib/cups/filter/pdftops (PID 32470)
I [12/Jan/2016:13:40:14 +0100] [Job 85] Started backend /usr/lib/cups/backend/usb (PID 32471)
D [12/Jan/2016:13:40:14 +0100] Discarding unused job-state-changed event...
D [12/Jan/2016:13:40:14 +0100] [Client 5] Returning IPP successful-ok for Print-Job (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:14 +0100] [Client 5] Content-Length: 192
D [12/Jan/2016:13:40:14 +0100] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:14 +0100] [Client 5] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:14 +0100] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=192, response=0x55a3830e86e0(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:14 +0100] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:14 +0100] [Client 5] bytes=0, http_state=0, data_remaining=192
D [12/Jan/2016:13:40:14 +0100] [Client 5] Flushing write buffer.
D [12/Jan/2016:13:40:14 +0100] [Client 5] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:14 +0100] [Client 5] Waiting for request.
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:14 +0100] PID 32467 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:14 +0100] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:14 +0100] [Client 5] Closing connection.
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetArray: job_uri[0]=\"/jobs/85\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetArray: job_id[0]=\"85\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetArray: job_state[0]=\"3\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetArray: job_state_message[0]=\"\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetArray: job_state_reasons[0]=\"none\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: refresh_page=\"2;URL=/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: TITLE=\"Print Test Page\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:14 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:14 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:14 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:14 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32467, file=17
D [12/Jan/2016:13:40:14 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:14 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:14 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:14 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:14 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:14 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:14 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32467, file=17
D [12/Jan/2016:13:40:14 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:14 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:14 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:14 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32467, file=17
D [12/Jan/2016:13:40:14 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:14 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:14 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:14 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:14 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:14 +0100] [Job 85] PDF template file doesn\'t have form. It\'s okay.
D [12/Jan/2016:13:40:14 +0100] [Job 85] pdftops - copying to temp print file \"/var/spool/cups/tmp/07ed656a1294d\"
D [12/Jan/2016:13:40:14 +0100] [Job 85] PID 32468 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [12/Jan/2016:13:40:14 +0100] [Job 85] Loading USB quirks from \"/usr/share/cups/usb\".
D [12/Jan/2016:13:40:14 +0100] [Job 85] Loaded 77 quirks.
D [12/Jan/2016:13:40:14 +0100] [Job 85] Printing on printer with URI: usb://Kyocera/FS-1010?serial=XAL4Z42646
D [12/Jan/2016:13:40:14 +0100] [Job 85] Printer make and model: Kyocera Mita FS-1010
D [12/Jan/2016:13:40:14 +0100] [Job 85] Running command line for pstops: pstops 85 anonymous \'Test Page\' 1 \'job-uuid=urn:uuid:5d064185-f165-3a9c-5dec-d34123f84c4d job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1452602414 time-at-processing=1452602414\'
D [12/Jan/2016:13:40:14 +0100] [Job 85] Using image rendering resolution 600 dpi
D [12/Jan/2016:13:40:14 +0100] [Job 85] Deactivated compression of pages in Ghostscript\'s PostScript output (\"psdebug\" debug mode or Kyocera/Utax printer)
D [12/Jan/2016:13:40:14 +0100] [Job 85] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=2 -r600 -dCompressPages=false -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c \'save pop\' -f /var/spool/cups/tmp/07ed656a1294d
D [12/Jan/2016:13:40:14 +0100] [Job 85] Started filter gs (PID 32473)
D [12/Jan/2016:13:40:14 +0100] [Job 85] Started post-processing (PID 32474)
D [12/Jan/2016:13:40:14 +0100] [Job 85] Started filter pstops (PID 32475)
D [12/Jan/2016:13:40:14 +0100] [Job 85] PID 32469 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [12/Jan/2016:13:40:14 +0100] [Job 85] libusb_get_device_list=16
D [12/Jan/2016:13:40:14 +0100] [Job 85] STATE: +connecting-to-device
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:14 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:13:40:14 +0100] [Job 85] STATE: -connecting-to-device
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [12/Jan/2016:13:40:14 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:13:40:14 +0100] [Job 85] Device protocol: 2
I [12/Jan/2016:13:40:14 +0100] [Job 85] Sending data to printer.
D [12/Jan/2016:13:40:14 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:14 +0100] [Job 85] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [12/Jan/2016:13:40:14 +0100] Discarding unused job-progress event...
D [12/Jan/2016:13:40:14 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Inserted workaround PostScript code for Kyocera and Utax printers
D [12/Jan/2016:13:40:16 +0100] [Job 85] Page = 595x842; 12,10 to 583,832
D [12/Jan/2016:13:40:16 +0100] [Job 85] slow_collate=0, slow_duplex=0, slow_order=0
D [12/Jan/2016:13:40:16 +0100] [Job 85] Before copy_comments - %!PS-Adobe-3.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] %!PS-Adobe-3.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%BoundingBox: 0 0 595 842
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%HiResBoundingBox: 0 0 595.00 842.00
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%Creator: GPL Ghostscript 918 (ps2write)
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%LanguageLevel: 2
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%CreationDate: D:20160112134014+01\'00\'
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%Pages: 1
D [12/Jan/2016:13:40:16 +0100] [Job 85] %%EndComments
D [12/Jan/2016:13:40:16 +0100] [Job 85] Before copy_prolog - %%BeginProlog
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 4096 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 4096 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Before copy_setup - %%Page: 1 1
D [12/Jan/2016:13:40:16 +0100] [Job 85] Before page loop - %%Page: 1 1
D [12/Jan/2016:13:40:16 +0100] [Job 85] Copying page 1...
D [12/Jan/2016:13:40:16 +0100] [Job 85] PAGE: 1 1
D [12/Jan/2016:13:40:16 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:16 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:16 +0100] Discarding unused job-progress event...
D [12/Jan/2016:13:40:16 +0100] [Job 85] pagew = 571.0, pagel = 822.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [12/Jan/2016:13:40:16 +0100] [Job 85] PageLeft = 12.0, PageRight = 583.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] PageTop = 832.0, PageBottom = 10.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] PageWidth = 595.0, PageLength = 842.0
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:16 +0100] [Client 1] GET /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:16 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:16 +0100] [Client 1] Processing GET /printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:16 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[27] = "PATH_INFO=/Kyocera-FS-1010"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:16 +0100] [CGI] envp[33] = "QUERY_STRING="
D [12/Jan/2016:13:40:16 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32483)
I [12/Jan/2016:13:40:16 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32483, file=16)
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [Client 6] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:16 +0100] [Client 6] Waiting for request.
D [12/Jan/2016:13:40:16 +0100] [Client 6] POST / HTTP/1.1
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 6] Read: status=200
D [12/Jan/2016:13:40:16 +0100] [Client 6] No authentication data provided.
D [12/Jan/2016:13:40:16 +0100] [Client 6] 2.0 CUPS-Get-Default 1
D [12/Jan/2016:13:40:16 +0100] CUPS-Get-Default
D [12/Jan/2016:13:40:16 +0100] [Client 6] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [12/Jan/2016:13:40:16 +0100] [Client 6] Content-Length: 174
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55a3830f4060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:16 +0100] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] bytes=0, http_state=0, data_remaining=174
D [12/Jan/2016:13:40:16 +0100] [Client 6] Flushing write buffer.
D [12/Jan/2016:13:40:16 +0100] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:16 +0100] [Client 6] Waiting for request.
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: DEFAULT_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: DEFAULT_URI=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] show_printer(http=0x5640a4f90bf0, printer=\"Kyocera-FS-1010\")
D [12/Jan/2016:13:40:16 +0100] [Client 6] POST / HTTP/1.1
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 6] Read: status=200
D [12/Jan/2016:13:40:16 +0100] [Client 6] No authentication data provided.
D [12/Jan/2016:13:40:16 +0100] [Client 6] 2.0 Get-Printer-Attributes 2
D [12/Jan/2016:13:40:16 +0100] Get-Printer-Attributes ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:16 +0100] [Client 6] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:16 +0100] [Client 6] Content-Length: 659
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=659, response=0x55a3830f42a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:16 +0100] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] bytes=0, http_state=0, data_remaining=659
D [12/Jan/2016:13:40:16 +0100] [Client 6] Flushing write buffer.
D [12/Jan/2016:13:40:16 +0100] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:16 +0100] [Client 6] Waiting for request.
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_is_shared[0]=\"0\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_state[0]=\"4\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_location[0]=\"Arch_Linux\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_info[0]=\"Kyocera FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: device_uri[0]=\"usb://Kyocera/FS-1010?serial=XAL4Z42646\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: color_supported[0]=\"0\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_make_and_model[0]=\"Kyocera Mita FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: media_default[0]=\"iso_a4_210x297mm\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: printer_commands[0]=\"AutoConfigure, Clean, PrintSelfTestPage\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"0\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: refresh_page=\"10;URL=/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: TITLE=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:16 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:16 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [CGI] Regular expression \".*Clean.*\"
D [12/Jan/2016:13:40:16 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:16 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:16 +0100] [CGI] Regular expression \".*PrintSelfTestPage.*\"
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:16 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 6] POST / HTTP/1.1
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 6] Read: status=200
D [12/Jan/2016:13:40:16 +0100] [Client 6] No authentication data provided.
D [12/Jan/2016:13:40:16 +0100] [Client 6] 2.0 Get-Jobs 3
D [12/Jan/2016:13:40:16 +0100] Get-Jobs ipp://localhost:631/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:16 +0100] [Client 6] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:16 +0100] [Client 6] Content-Length: 414
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:16 +0100] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=414, response=0x55a3830f8720(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:16 +0100] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:16 +0100] [Client 6] bytes=0, http_state=0, data_remaining=414
D [12/Jan/2016:13:40:16 +0100] [Client 6] Flushing write buffer.
D [12/Jan/2016:13:40:16 +0100] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:16 +0100] [Client 6] Waiting for request.
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiClearVariables called.
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: ORDER=\"asc\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: TOTAL=\"1\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_printer_uri[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_name[0]=\"Test Page\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_originating_user_name[0]=\"anonymous\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: time_at_completed[0]=\"novalue\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: time_at_creation[0]=\"Tue 12 Jan 2016 13:40:14 CET\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: time_at_processing[0]=\"Tue 12 Jan 2016 13:40:14 CET\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_id[0]=\"85\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_state[0]=\"5\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_media_sheets_completed[0]=\"1\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_k_octets[0]=\"1\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetArray: job_printer_state_message[0]=\"Sending data to printer.\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [CGI] cgiSetVariable: SEARCH_DEST=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:16 +0100] [Client 6] Closing connection.
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] PID 32483 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:16 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32483, file=16
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:16 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:16 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:16 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:16 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 1] GET /cups.css HTTP/1.1
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:16 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:16 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:16 +0100] [Client 1] Processing GET /cups.css
D [12/Jan/2016:13:40:16 +0100] [Client 1] filename="/usr/share/cups/doc/cups.css", type=text/css
D [12/Jan/2016:13:40:16 +0100] [Client 1] cupsdSendHeader: code=304, type="(null)", auth_type=0
D [12/Jan/2016:13:40:16 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 77 bytes of back-channel data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 129 bytes of back-channel data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:25 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Client 1] GET /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:26 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:26 +0100] [Client 1] Processing GET /printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:26 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[27] = "PATH_INFO=/Kyocera-FS-1010"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:26 +0100] [CGI] envp[33] = "QUERY_STRING="
D [12/Jan/2016:13:40:26 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32525)
I [12/Jan/2016:13:40:26 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32525, file=16)
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [Client 7] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:26 +0100] [Client 7] Waiting for request.
D [12/Jan/2016:13:40:26 +0100] [Client 7] POST / HTTP/1.1
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 7] Read: status=200
D [12/Jan/2016:13:40:26 +0100] [Client 7] No authentication data provided.
D [12/Jan/2016:13:40:26 +0100] [Client 7] 2.0 CUPS-Get-Default 1
D [12/Jan/2016:13:40:26 +0100] CUPS-Get-Default
D [12/Jan/2016:13:40:26 +0100] [Client 7] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [12/Jan/2016:13:40:26 +0100] [Client 7] Content-Length: 174
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55a3830f4060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:26 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] bytes=0, http_state=0, data_remaining=174
D [12/Jan/2016:13:40:26 +0100] [Client 7] Flushing write buffer.
D [12/Jan/2016:13:40:26 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:26 +0100] [Client 7] Waiting for request.
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: DEFAULT_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: DEFAULT_URI=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] show_printer(http=0x555a6e3d5bf0, printer=\"Kyocera-FS-1010\")
D [12/Jan/2016:13:40:26 +0100] [Client 7] POST / HTTP/1.1
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 7] Read: status=200
D [12/Jan/2016:13:40:26 +0100] [Client 7] No authentication data provided.
D [12/Jan/2016:13:40:26 +0100] [Client 7] 2.0 Get-Printer-Attributes 2
D [12/Jan/2016:13:40:26 +0100] Get-Printer-Attributes ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:26 +0100] [Client 7] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:26 +0100] [Client 7] Content-Length: 659
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=659, response=0x55a3830f42a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:26 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] bytes=0, http_state=0, data_remaining=659
D [12/Jan/2016:13:40:26 +0100] [Client 7] Flushing write buffer.
D [12/Jan/2016:13:40:26 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:26 +0100] [Client 7] Waiting for request.
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_is_shared[0]=\"0\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_state[0]=\"4\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_location[0]=\"Arch_Linux\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_info[0]=\"Kyocera FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: device_uri[0]=\"usb://Kyocera/FS-1010?serial=XAL4Z42646\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: color_supported[0]=\"0\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_make_and_model[0]=\"Kyocera Mita FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: media_default[0]=\"iso_a4_210x297mm\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: printer_commands[0]=\"AutoConfigure, Clean, PrintSelfTestPage\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"0\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: refresh_page=\"10;URL=/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: TITLE=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:26 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:26 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [CGI] Regular expression \".*Clean.*\"
D [12/Jan/2016:13:40:26 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:26 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:26 +0100] [CGI] Regular expression \".*PrintSelfTestPage.*\"
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:26 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 7] POST / HTTP/1.1
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 7] Read: status=200
D [12/Jan/2016:13:40:26 +0100] [Client 7] No authentication data provided.
D [12/Jan/2016:13:40:26 +0100] [Client 7] 2.0 Get-Jobs 3
D [12/Jan/2016:13:40:26 +0100] Get-Jobs ipp://localhost:631/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:26 +0100] [Client 7] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:26 +0100] [Client 7] Content-Length: 414
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:26 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=414, response=0x55a3830f8720(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:26 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:26 +0100] [Client 7] bytes=0, http_state=0, data_remaining=414
D [12/Jan/2016:13:40:26 +0100] [Client 7] Flushing write buffer.
D [12/Jan/2016:13:40:26 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:26 +0100] [Client 7] Waiting for request.
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiClearVariables called.
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: ORDER=\"asc\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: TOTAL=\"1\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_printer_uri[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_name[0]=\"Test Page\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_originating_user_name[0]=\"anonymous\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: time_at_completed[0]=\"novalue\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: time_at_creation[0]=\"Tue 12 Jan 2016 13:40:14 CET\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: time_at_processing[0]=\"Tue 12 Jan 2016 13:40:14 CET\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_id[0]=\"85\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_state[0]=\"5\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_media_sheets_completed[0]=\"1\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_k_octets[0]=\"1\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetArray: job_printer_state_message[0]=\"Sending data to printer.\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [CGI] cgiSetVariable: SEARCH_DEST=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:26 +0100] [Client 7] Closing connection.
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:26 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32525, file=16
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:26 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:26 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:26 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:26 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] PID 32525 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Client 1] GET /cups.css HTTP/1.1
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:26 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:26 +0100] [Client 1] Processing GET /cups.css
D [12/Jan/2016:13:40:26 +0100] [Client 1] filename="/usr/share/cups/doc/cups.css", type=text/css
D [12/Jan/2016:13:40:26 +0100] [Client 1] cupsdSendHeader: code=304, type="(null)", auth_type=0
D [12/Jan/2016:13:40:26 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:26 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] PID 32473 (gs) exited with no errors.
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] PID 32474 (Post-processing) exited with no errors.
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 1 pages...
D [12/Jan/2016:13:40:27 +0100] [Job 85] PID 32475 (pstops) exited with no errors.
D [12/Jan/2016:13:40:27 +0100] [Job 85] PID 32470 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 8192 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Read 7788 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Wrote 7788 bytes of print data...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Sent 1912428 bytes...
D [12/Jan/2016:13:40:27 +0100] [Job 85] Waiting for read thread to exit...
D [12/Jan/2016:13:40:34 +0100] [Job 85] Read thread still active, aborting the pending read...
D [12/Jan/2016:13:40:35 +0100] [Job 85] PID 32471 (/usr/lib/cups/backend/usb) exited with no errors.
D [12/Jan/2016:13:40:35 +0100] [Job 85] time-at-completed=1452602435
D [12/Jan/2016:13:40:35 +0100] Discarding unused job-completed event...
I [12/Jan/2016:13:40:35 +0100] [Job 85] Job completed.
D [12/Jan/2016:13:40:35 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:35 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:35 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:35 +0100] Discarding unused printer-state-changed event...
D [12/Jan/2016:13:40:35 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:35 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:35 +0100] [Job 85] Removing document files.
D [12/Jan/2016:13:40:35 +0100] cupsdMarkDirty(---J-)
D [12/Jan/2016:13:40:35 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [12/Jan/2016:13:40:36 +0100] [Job 85] Unloading...
D [12/Jan/2016:13:40:36 +0100] [Client 1] GET /printers/Kyocera-FS-1010 HTTP/1.1
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:36 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:36 +0100] [Client 1] Processing GET /printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:36 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[13] = "USER=root"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[18] = "LANG=en_GB.UTF8"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[25] = "SCRIPT_NAME=/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[27] = "PATH_INFO=/Kyocera-FS-1010"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=70ddecc01f8c58c5d0bc28e15aaa4859"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.106 Safari/537.36"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/printers/Kyocera-FS-1010"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [12/Jan/2016:13:40:36 +0100] [CGI] envp[33] = "QUERY_STRING="
D [12/Jan/2016:13:40:36 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 32540)
I [12/Jan/2016:13:40:36 +0100] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32540, file=16)
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [CGI] org.cups.sid cookie is \"70ddecc01f8c58c5d0bc28e15aaa4859\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [Client 8] Accepted from localhost (Domain)
D [12/Jan/2016:13:40:36 +0100] [Client 8] Waiting for request.
D [12/Jan/2016:13:40:36 +0100] [Client 8] POST / HTTP/1.1
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 8] Read: status=200
D [12/Jan/2016:13:40:36 +0100] [Client 8] No authentication data provided.
D [12/Jan/2016:13:40:36 +0100] [Client 8] 2.0 CUPS-Get-Default 1
D [12/Jan/2016:13:40:36 +0100] CUPS-Get-Default
D [12/Jan/2016:13:40:36 +0100] [Client 8] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [12/Jan/2016:13:40:36 +0100] [Client 8] Content-Length: 174
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=174, response=0x55a382ff15e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:36 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] bytes=0, http_state=0, data_remaining=174
D [12/Jan/2016:13:40:36 +0100] [Client 8] Flushing write buffer.
D [12/Jan/2016:13:40:36 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:36 +0100] [Client 8] Waiting for request.
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: DEFAULT_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: DEFAULT_URI=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] show_printer(http=0x5642b226fbf0, printer=\"Kyocera-FS-1010\")
D [12/Jan/2016:13:40:36 +0100] [Client 8] POST / HTTP/1.1
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 8] Read: status=200
D [12/Jan/2016:13:40:36 +0100] [Client 8] No authentication data provided.
D [12/Jan/2016:13:40:36 +0100] [Client 8] 2.0 Get-Printer-Attributes 2
D [12/Jan/2016:13:40:36 +0100] Get-Printer-Attributes ipp://localhost/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:36 +0100] [Client 8] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:36 +0100] [Client 8] Content-Length: 659
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=659, response=0x55a382ff23b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:36 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] bytes=0, http_state=0, data_remaining=659
D [12/Jan/2016:13:40:36 +0100] [Client 8] Flushing write buffer.
D [12/Jan/2016:13:40:36 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:36 +0100] [Client 8] Waiting for request.
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_is_shared[0]=\"0\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_state[0]=\"3\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_name[0]=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_location[0]=\"Arch_Linux\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_info[0]=\"Kyocera FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: device_uri[0]=\"usb://Kyocera/FS-1010?serial=XAL4Z42646\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: color_supported[0]=\"0\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_make_and_model[0]=\"Kyocera Mita FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: media_default[0]=\"iso_a4_210x297mm\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: printer_commands[0]=\"AutoConfigure, Clean, PrintSelfTestPage\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"0\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: TITLE=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.2\"
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] Script header: Content-Type: text/html;charset=utf-8
D [12/Jan/2016:13:40:36 +0100] [Client 1] Script header: 
D [12/Jan/2016:13:40:36 +0100] [Client 1] Sending status 200 for CGI.
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [CGI] Regular expression \".*Clean.*\"
D [12/Jan/2016:13:40:36 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:36 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:36 +0100] [CGI] Regular expression \".*PrintSelfTestPage.*\"
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [CGI] matches[0].rm_so=0
D [12/Jan/2016:13:40:36 +0100] [CGI] matches[1].rm_so=-1
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 8] POST / HTTP/1.1
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 8] Read: status=200
D [12/Jan/2016:13:40:36 +0100] [Client 8] No authentication data provided.
D [12/Jan/2016:13:40:36 +0100] [Client 8] 2.0 Get-Jobs 3
D [12/Jan/2016:13:40:36 +0100] Get-Jobs ipp://localhost:631/printers/Kyocera-FS-1010
D [12/Jan/2016:13:40:36 +0100] [Client 8] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [12/Jan/2016:13:40:36 +0100] [Client 8] Content-Length: 75
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] con->http=0x55a3830ebc50
D [12/Jan/2016:13:40:36 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55a3830e6da0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jan/2016:13:40:36 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jan/2016:13:40:36 +0100] [Client 8] bytes=0, http_state=0, data_remaining=75
D [12/Jan/2016:13:40:36 +0100] [Client 8] Flushing write buffer.
D [12/Jan/2016:13:40:36 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:36 +0100] [Client 8] Waiting for request.
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiClearVariables called.
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: ORDER=\"asc\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: TOTAL=\"0\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [CGI] cgiSetVariable: SEARCH_DEST=\"Kyocera-FS-1010\"
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jan/2016:13:40:36 +0100] [Client 8] Closing connection.
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] CGI data ready to be sent.
D [12/Jan/2016:13:40:36 +0100] [Client 1] con->http=0x55a3830e8a40
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32540, file=16
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for CGI data.
D [12/Jan/2016:13:40:36 +0100] [Client 1] Sending 0-length chunk.
D [12/Jan/2016:13:40:36 +0100] [Client 1] Flushing write buffer.
D [12/Jan/2016:13:40:36 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [12/Jan/2016:13:40:36 +0100] [Client 1] Waiting for request.
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jan/2016:13:40:36 +0100] PID 32540 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jan/2016:13:40:36 +0100] [Client 1] GET /cups.css HTTP/1.1
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jan/2016:13:40:36 +0100] [Client 1] Read: status=200
D [12/Jan/2016:13:40:36 +0100] [Client 1] No authentication data provided.
D [12/Jan/2016:13:40:36 +0100] [Client 1] Processing GET /cups.css
D [12/Jan/2016:13:40:36 +0100] [Client 1] filename="/usr/share/cups/doc/cups.css", type=text/css
D [12/Jan/2016:13:40:36 +0100] [Client 1] cupsdSendHeader: code=304, type="(null)", auth_type=0
D [12/Jan/2016:13:40:36 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [12/Jan/2016:13:40:45 +0100] Saving job.cache...
D [12/Jan/2016:13:40:45 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [12/Jan/2016:13:45:37 +0100] cupsdAddCert: Adding certificate for PID 0
D [12/Jan/2016:13:45:37 +0100] Closing client 1 after 300 seconds of inactivity.
D [12/Jan/2016:13:45:37 +0100] [Client 1] Closing connection.
D [12/Jan/2016:13:45:37 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [12/Jan/2016:13:45:37 +0100] Report: clients=0
D [12/Jan/2016:13:45:37 +0100] Report: jobs=18
D [12/Jan/2016:13:45:37 +0100] Report: jobs-active=0
D [12/Jan/2016:13:45:37 +0100] Report: printers=2
D [12/Jan/2016:13:45:37 +0100] Report: stringpool-string-count=11772
D [12/Jan/2016:13:45:37 +0100] Report: stringpool-alloc-bytes=9488
D [12/Jan/2016:13:45:37 +0100] Report: stringpool-total-bytes=212392

If anything is missing, please tell me how to get it. I am at the end of my knowledge

paulkerry · 2016-01-13 19:18:56

That's odd! I expected more lines of output in the log file.

Does any other print job fail apart from the test page? If you send a print job as a user from the command line, you will get a print job id. You can also get the id after it has finished using...

lpstat -W all -o

You should then get more lines relating to the job id in the log file which tell you which printer filters are being used and if they are successfully run or not.

lokesh987 · 2016-01-13 21:51:10

paulkerry wrote:

Does any other print job fail apart from the test page?

All jobs failed, I used Kate, MSWord, LibreOffice, an Internetbrowser. This time now (which created the below attached log data) I used "lpr" from the command line and a pdf document. No difference in the output, error message, and stopping of the printer (needs restart).

paulkerry wrote:

If you send a print job as a user from the command line, you will get a print job id. You can also get the id after it has finished using...
lpstat -W all -o
You should then get more lines relating to the job id in the log file which tell you which printer filters are being used and if they are successfully run or not.

Here it comes:

D [13/Jan/2016:22:33:14 +0100] [Client 55] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 55] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] cupsdAddCert: Adding certificate for PID 0
D [13/Jan/2016:22:33:14 +0100] Report: clients=1
D [13/Jan/2016:22:33:14 +0100] Report: jobs=19
D [13/Jan/2016:22:33:14 +0100] Report: jobs-active=0
D [13/Jan/2016:22:33:14 +0100] Report: printers=2
D [13/Jan/2016:22:33:14 +0100] Report: stringpool-string-count=11776
D [13/Jan/2016:22:33:14 +0100] Report: stringpool-alloc-bytes=9552
D [13/Jan/2016:22:33:14 +0100] Report: stringpool-total-bytes=212424
D [13/Jan/2016:22:33:14 +0100] [Client 55] POST / HTTP/1.1
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 55] Read: status=200
D [13/Jan/2016:22:33:14 +0100] [Client 55] No authentication data provided.
D [13/Jan/2016:22:33:14 +0100] [Client 55] 2.0 CUPS-Get-Devices 1
D [13/Jan/2016:22:33:14 +0100] CUPS-Get-Devices
D [13/Jan/2016:22:33:14 +0100] cupsdIsAuthorized: username=""
D [13/Jan/2016:22:33:14 +0100] [Client 55] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [13/Jan/2016:22:33:14 +0100] [Client 55] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [13/Jan/2016:22:33:14 +0100] [Client 55] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [13/Jan/2016:22:33:14 +0100] [Client 55] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 55] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [13/Jan/2016:22:33:14 +0100] [Client 56] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 56] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 57] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 57] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 56] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 56] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 58] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 57] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 57] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 58] POST / HTTP/1.1
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 58] Read: status=200
D [13/Jan/2016:22:33:14 +0100] [Client 58] Authorized as root using PeerCred.
D [13/Jan/2016:22:33:14 +0100] [Client 58] 2.0 CUPS-Get-Devices 1
D [13/Jan/2016:22:33:14 +0100] CUPS-Get-Devices
D [13/Jan/2016:22:33:14 +0100] cupsdIsAuthorized: username="root"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[1] = "1"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[2] = "0"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[3] = "2"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[4] = "2"
D [13/Jan/2016:22:33:14 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes=\'beh\',\'cups-pdf\',\'bluetooth\',\'dnssd\',\'http\',\'https\',\'ipp\',\'lpd\',\'ncp\',\'parallel\',\'scsi\',\'smb\',\'snmp\',\'socket\'"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Arch_Linux"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.2"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[13] = "USER=root"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[18] = "AUTH_TYPE=PeerCred"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[19] = "LANG=en_GB.UTF8"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[22] = "SERVER_NAME=localhost"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[23] = "SERVER_PORT=631"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[24] = "REMOTE_ADDR=localhost"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[26] = "SCRIPT_NAME=/"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[28] = "REMOTE_USER=root"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=CUPS/2.1.2 (Linux 4.3.3-2-ARCH; x86_64) IPP/2.0"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[32] = "CONTENT_LENGTH=244"
D [13/Jan/2016:22:33:14 +0100] [CGI] envp[33] = "CONTENT_TYPE=application/ipp"
D [13/Jan/2016:22:33:14 +0100] cupsdAddCert: Adding certificate for PID 32567
D [13/Jan/2016:22:33:14 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 32567)
I [13/Jan/2016:22:33:14 +0100] [Client 58] Started "/usr/lib/cups/daemon/cups-deviced" (pid=32567, file=16)
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 32568)
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 32569)
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 32570)
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 32571)
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] PID 32571 (implicitclass) exited with no errors.
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] PID 32570 (serial) exited with no errors.
D [13/Jan/2016:22:33:14 +0100] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [13/Jan/2016:22:33:14 +0100] [CGI] Loaded 77 quirks.
D [13/Jan/2016:22:33:14 +0100] [CGI] list_devices
D [13/Jan/2016:22:33:14 +0100] [Client 58] CGI data ready to be sent.
D [13/Jan/2016:22:33:14 +0100] [CGI] Flushed attributes...
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Found device \"ipps\"...
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [Client 58] Script header: Content-Type: application/ipp
D [13/Jan/2016:22:33:14 +0100] [Client 58] Script header: 
D [13/Jan/2016:22:33:14 +0100] [Client 58] Sending status 200 for CGI.
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] PID 32568 (ipps) exited with no errors.
D [13/Jan/2016:22:33:14 +0100] [CGI] libusb_get_device_list=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] CGI data ready to be sent.
D [13/Jan/2016:22:33:14 +0100] [CGI] Flushed attributes...
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] Found device \"usb://Kyocera/FS-1010?serial=XAL4Z42646\"...
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [cups-deviced] PID 32569 (usb) exited with no errors.
D [13/Jan/2016:22:33:14 +0100] [Client 58] CGI data ready to be sent.
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [Client 58] CGI data ready to be sent.
D [13/Jan/2016:22:33:14 +0100] PID 32567 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [13/Jan/2016:22:33:14 +0100] [Client 58] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=32567, file=16
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for CGI data.
D [13/Jan/2016:22:33:14 +0100] [Client 58] Sending 0-length chunk.
D [13/Jan/2016:22:33:14 +0100] [Client 58] Flushing write buffer.
D [13/Jan/2016:22:33:14 +0100] [Client 58] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:33:14 +0100] [Client 58] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [13/Jan/2016:22:33:14 +0100] [Client 58] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 58] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 59] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 59] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 59] POST / HTTP/1.1
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 59] Read: status=200
D [13/Jan/2016:22:33:14 +0100] [Client 59] No authentication data provided.
D [13/Jan/2016:22:33:14 +0100] [Client 59] 2.0 CUPS-Get-Printers 2
D [13/Jan/2016:22:33:14 +0100] CUPS-Get-Printers
D [13/Jan/2016:22:33:14 +0100] [Client 59] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [13/Jan/2016:22:33:14 +0100] [Client 59] Content-Length: 411
D [13/Jan/2016:22:33:14 +0100] [Client 59] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:33:14 +0100] [Client 59] con->http=0x559fb04f88c0
D [13/Jan/2016:22:33:14 +0100] [Client 59] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x559fb03f65e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:33:14 +0100] [Client 59] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:33:14 +0100] [Client 59] bytes=0, http_state=0, data_remaining=411
D [13/Jan/2016:22:33:14 +0100] [Client 59] Flushing write buffer.
D [13/Jan/2016:22:33:14 +0100] [Client 59] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:33:14 +0100] [Client 59] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [13/Jan/2016:22:33:14 +0100] [Client 59] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 59] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 60] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 60] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 60] POST /admin/ HTTP/1.1
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 60] Read: status=200
D [13/Jan/2016:22:33:14 +0100] [Client 60] No authentication data provided.
D [13/Jan/2016:22:33:14 +0100] [Client 60] 2.0 Resume-Printer 3
D [13/Jan/2016:22:33:14 +0100] Resume-Printer ipp://localhost/printers/Kyocera-FS-1010
D [13/Jan/2016:22:33:14 +0100] cupsdIsAuthorized: username=""
D [13/Jan/2016:22:33:14 +0100] [Client 60] Returning HTTP Unauthorized for Resume-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [13/Jan/2016:22:33:14 +0100] [Client 60] cupsdSendHeader: code=401, type="text/html", auth_type=1
D [13/Jan/2016:22:33:14 +0100] [Client 60] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [13/Jan/2016:22:33:14 +0100] [Client 60] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 60] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [13/Jan/2016:22:33:14 +0100] [Client 61] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 61] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 62] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 62] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 61] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 61] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 63] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:14 +0100] [Client 63] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] [Client 62] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 62] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 63] POST /admin/ HTTP/1.1
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:33:14 +0100] [Client 63] Read: status=200
D [13/Jan/2016:22:33:14 +0100] [Client 63] Authorized as root using PeerCred.
D [13/Jan/2016:22:33:14 +0100] [Client 63] 2.0 Resume-Printer 3
D [13/Jan/2016:22:33:14 +0100] Resume-Printer ipp://localhost/printers/Kyocera-FS-1010
D [13/Jan/2016:22:33:14 +0100] cupsdIsAuthorized: username="root"
D [13/Jan/2016:22:33:14 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:33:14 +0100] cupsdMarkDirty(P----)
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [13/Jan/2016:22:33:14 +0100] cupsdRegisterPrinter(p=0x559fb03e4e90(Kyocera-FS-1010))
D [13/Jan/2016:22:33:14 +0100] cupsdMarkDirty(P----)
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [13/Jan/2016:22:33:14 +0100] Printer "Kyocera-FS-1010" started by "root".
D [13/Jan/2016:22:33:14 +0100] [Client 63] Returning IPP successful-ok for Resume-Printer (ipp://localhost/printers/Kyocera-FS-1010) from localhost
D [13/Jan/2016:22:33:14 +0100] [Client 63] Content-Length: 75
D [13/Jan/2016:22:33:14 +0100] [Client 63] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:33:14 +0100] [Client 63] con->http=0x559fb04f2c50
D [13/Jan/2016:22:33:14 +0100] [Client 63] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x559fb04fdc30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:33:14 +0100] [Client 63] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:33:14 +0100] [Client 63] bytes=0, http_state=0, data_remaining=75
D [13/Jan/2016:22:33:14 +0100] [Client 63] Flushing write buffer.
D [13/Jan/2016:22:33:14 +0100] [Client 63] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:33:14 +0100] [Client 63] Waiting for request.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:14 +0100] [Client 63] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:14 +0100] [Client 63] Closing connection.
D [13/Jan/2016:22:33:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:33:33 +0100] [Client 64] Accepted from localhost (Domain)
D [13/Jan/2016:22:33:33 +0100] [Client 64] Waiting for request.
D [13/Jan/2016:22:33:33 +0100] [Client 64] POST / HTTP/1.1
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Jan/2016:22:33:33 +0100] [Client 64] Read: status=200
D [13/Jan/2016:22:33:33 +0100] [Client 64] No authentication data provided.
D [13/Jan/2016:22:33:33 +0100] [Client 64] 2.0 Get-Jobs 1
D [13/Jan/2016:22:33:33 +0100] Get-Jobs ipp://localhost/
I [13/Jan/2016:22:33:33 +0100] [Client 64] Limiting Get-Jobs response to 500 jobs.
D [13/Jan/2016:22:33:33 +0100] [Job 68] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 69] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 70] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 71] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 72] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 73] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 74] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 75] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 76] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 77] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 78] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 79] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 80] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 81] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 82] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 83] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 84] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 85] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Job 86] Loading attributes...
D [13/Jan/2016:22:33:33 +0100] [Client 64] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [13/Jan/2016:22:33:33 +0100] [Client 64] Content-Length: 5620
D [13/Jan/2016:22:33:33 +0100] [Client 64] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:33:33 +0100] [Job 68] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 69] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 70] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 71] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 72] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 73] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 74] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 75] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 76] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 77] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 78] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 79] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 80] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 81] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 82] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 83] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 84] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Job 85] Removing document files.
D [13/Jan/2016:22:33:33 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Client 64] con->http=0x559fb04f88c0
D [13/Jan/2016:22:33:33 +0100] [Client 64] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=5620, response=0x559fb03f84b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:33:33 +0100] [Client 64] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:33:33 +0100] [Client 64] bytes=0, http_state=0, data_remaining=5620
D [13/Jan/2016:22:33:33 +0100] [Client 64] Flushing write buffer.
D [13/Jan/2016:22:33:33 +0100] [Client 64] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:33:33 +0100] [Client 64] Waiting for request.
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:33:33 +0100] [Client 64] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:33:33 +0100] [Client 64] Closing connection.
D [13/Jan/2016:22:33:33 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [13/Jan/2016:22:33:45 +0100] Saving printers.conf...
I [13/Jan/2016:22:33:45 +0100] Saving job.cache...
D [13/Jan/2016:22:33:45 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [13/Jan/2016:22:36:05 +0100] [Client 65] Accepted from localhost (Domain)
D [13/Jan/2016:22:36:05 +0100] [Client 65] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] [Job 68] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 69] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 70] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 71] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 72] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 73] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 74] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 75] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 76] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 77] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 78] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 79] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 80] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 81] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 82] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 83] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 84] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 85] Unloading...
D [13/Jan/2016:22:36:05 +0100] [Job 86] Unloading...
D [13/Jan/2016:22:36:05 +0100] Report: clients=1
D [13/Jan/2016:22:36:05 +0100] Report: jobs=19
D [13/Jan/2016:22:36:05 +0100] Report: jobs-active=0
D [13/Jan/2016:22:36:05 +0100] Report: printers=2
D [13/Jan/2016:22:36:05 +0100] Report: stringpool-string-count=11778
D [13/Jan/2016:22:36:05 +0100] Report: stringpool-alloc-bytes=9576
D [13/Jan/2016:22:36:05 +0100] Report: stringpool-total-bytes=212448
D [13/Jan/2016:22:36:05 +0100] [Client 65] POST / HTTP/1.1
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:36:05 +0100] [Client 65] Read: status=200
D [13/Jan/2016:22:36:05 +0100] [Client 65] No authentication data provided.
D [13/Jan/2016:22:36:05 +0100] [Client 65] 2.0 CUPS-Get-Default 1
D [13/Jan/2016:22:36:05 +0100] CUPS-Get-Default
D [13/Jan/2016:22:36:05 +0100] [Client 65] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [13/Jan/2016:22:36:05 +0100] [Client 65] Content-Length: 1171
D [13/Jan/2016:22:36:05 +0100] [Client 65] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:36:05 +0100] [Client 65] con->http=0x559fb04f88c0
D [13/Jan/2016:22:36:05 +0100] [Client 65] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1171, response=0x559fb04ff550(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:36:05 +0100] [Client 65] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:36:05 +0100] [Client 65] bytes=0, http_state=0, data_remaining=1171
D [13/Jan/2016:22:36:05 +0100] [Client 65] Flushing write buffer.
D [13/Jan/2016:22:36:05 +0100] [Client 65] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:36:05 +0100] [Client 65] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [13/Jan/2016:22:36:05 +0100] [Client 65] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:36:05 +0100] [Client 65] Closing connection.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Jan/2016:22:36:05 +0100] [Client 66] Accepted from localhost (Domain)
D [13/Jan/2016:22:36:05 +0100] [Client 66] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] [Client 66] POST /printers/Kyocera-FS-1010 HTTP/1.1
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:36:05 +0100] [Client 66] Read: status=200
D [13/Jan/2016:22:36:05 +0100] [Client 66] No authentication data provided.
D [13/Jan/2016:22:36:05 +0100] [Client 66] 2.0 Create-Job 2
D [13/Jan/2016:22:36:05 +0100] Create-Job ipp://localhost:631/printers/Kyocera-FS-1010
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [13/Jan/2016:22:36:05 +0100] add_job: requesting-user-name="ralf"
I [13/Jan/2016:22:36:05 +0100] [Job 87] Adding start banner page "none".
D [13/Jan/2016:22:36:05 +0100] Discarding unused job-created event...
I [13/Jan/2016:22:36:05 +0100] [Job 87] Queued on "Kyocera-FS-1010" by "ralf".
D [13/Jan/2016:22:36:05 +0100] [Client 66] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [13/Jan/2016:22:36:05 +0100] [Client 66] Content-Length: 200
D [13/Jan/2016:22:36:05 +0100] [Client 66] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:36:05 +0100] [Client 66] con->http=0x559fb04f88c0
D [13/Jan/2016:22:36:05 +0100] [Client 66] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=200, response=0x559fb04ee340(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [13/Jan/2016:22:36:05 +0100] [Client 66] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:36:05 +0100] [Client 66] bytes=0, http_state=0, data_remaining=200
D [13/Jan/2016:22:36:05 +0100] [Client 66] Flushing write buffer.
D [13/Jan/2016:22:36:05 +0100] [Client 66] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:36:05 +0100] [Client 66] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:36:05 +0100] [Client 66] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:36:05 +0100] [Client 66] Closing connection.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:05 +0100] [Client 67] Accepted from localhost (Domain)
D [13/Jan/2016:22:36:05 +0100] [Client 67] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] [Client 67] POST /printers/Kyocera-FS-1010 HTTP/1.1
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=200
D [13/Jan/2016:22:36:05 +0100] [Client 67] No authentication data provided.
D [13/Jan/2016:22:36:05 +0100] [Client 67] 2.0 Send-Document 3
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] [Client 67] Read: status=100
D [13/Jan/2016:22:36:05 +0100] Send-Document ipp://localhost:631/printers/Kyocera-FS-1010
D [13/Jan/2016:22:36:05 +0100] cupsdIsAuthorized: requesting-user-name="ralf"
D [13/Jan/2016:22:36:05 +0100] [Job 87] Auto-typing file...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Request file type is application/pdf.
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [13/Jan/2016:22:36:05 +0100] [Job 87] File of type application/pdf queued by "ralf".
I [13/Jan/2016:22:36:05 +0100] [Job 87] Adding end banner page "none".
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:36:05 +0100] [Job 87] time-at-processing=1452720965
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:36:05 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:36:05 +0100] [Job 87] 3 filters for job:
D [13/Jan/2016:22:36:05 +0100] [Job 87] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [13/Jan/2016:22:36:05 +0100] [Job 87] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [13/Jan/2016:22:36:05 +0100] [Job 87] - (application/vnd.cups-postscript to printer/Kyocera-FS-1010, cost 0)
D [13/Jan/2016:22:36:05 +0100] [Job 87] job-sheets=none,none
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[0]="Kyocera-FS-1010"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[1]="87"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[2]="ralf"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[3]="Testfile.pdf"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[4]="1"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[5]="finishings=3 number-up=1 job-uuid=urn:uuid:c23a1cc5-be3e-381b-5ca2-2966735955eb job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1452720965 time-at-processing=1452720965 document-name-supplied=Freistellung.pdf"
D [13/Jan/2016:22:36:05 +0100] [Job 87] argv[6]="/var/spool/cups/d00087-001"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[7]="CUPS_STATEDIR=/run/cups"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[8]="HOME=/var/spool/cups/tmp"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[10]="SERVER_ADMIN=root@Arch_Linux"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[11]="SOFTWARE=CUPS/2.1.2"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[13]="USER=root"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[14]="CUPS_MAX_MESSAGE=2047"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[17]="IPP_PORT=631"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[18]="CHARSET=utf-8"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[19]="LANG=en_GB.UTF-8"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[20]="PPD=/etc/cups/ppd/Kyocera-FS-1010.ppd"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[21]="RIP_MAX_CACHE=128m"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[22]="CONTENT_TYPE=application/pdf"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[23]="DEVICE_URI=usb://Kyocera/FS-1010?serial=XAL4Z42646"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[24]="PRINTER_INFO=Kyocera FS-1010"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[25]="PRINTER_LOCATION=Arch_Linux"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[26]="PRINTER=Kyocera-FS-1010"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[27]="PRINTER_STATE_REASONS=none"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[28]="CUPS_FILETYPE=document"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [13/Jan/2016:22:36:05 +0100] [Job 87] envp[30]="AUTH_I****"
I [13/Jan/2016:22:36:05 +0100] [Job 87] Started filter /usr/lib/cups/filter/pdftopdf (PID 488)
I [13/Jan/2016:22:36:05 +0100] [Job 87] Started filter /usr/lib/cups/filter/pdftops (PID 489)
I [13/Jan/2016:22:36:05 +0100] [Job 87] Started backend /usr/lib/cups/backend/usb (PID 490)
D [13/Jan/2016:22:36:05 +0100] Discarding unused job-state-changed event...
D [13/Jan/2016:22:36:05 +0100] [Client 67] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/Kyocera-FS-1010) from localhost
D [13/Jan/2016:22:36:05 +0100] [Client 67] Content-Length: 170
D [13/Jan/2016:22:36:05 +0100] [Client 67] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:36:05 +0100] [Client 67] con->http=0x559fb04f88c0
D [13/Jan/2016:22:36:05 +0100] [Client 67] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=170, response=0x559fb04fbad0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:36:05 +0100] [Client 67] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:36:05 +0100] [Client 67] bytes=0, http_state=0, data_remaining=170
D [13/Jan/2016:22:36:05 +0100] [Client 67] Flushing write buffer.
D [13/Jan/2016:22:36:05 +0100] [Client 67] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:36:05 +0100] [Client 67] Waiting for request.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:36:05 +0100] [Client 67] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:36:05 +0100] [Client 67] Closing connection.
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:05 +0100] [Job 87] Loading USB quirks from \"/usr/share/cups/usb\".
D [13/Jan/2016:22:36:05 +0100] [Job 87] Loaded 77 quirks.
D [13/Jan/2016:22:36:05 +0100] [Job 87] Printing on printer with URI: usb://Kyocera/FS-1010?serial=XAL4Z42646
D [13/Jan/2016:22:36:05 +0100] [Job 87] pdftops - copying to temp print file \"/var/spool/cups/tmp/001e9569bab97\"
D [13/Jan/2016:22:36:05 +0100] [Job 87] libusb_get_device_list=16
D [13/Jan/2016:22:36:05 +0100] [Job 87] STATE: +connecting-to-device
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:05 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:36:05 +0100] [Job 87] STATE: -connecting-to-device
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:05 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Device protocol: 2
I [13/Jan/2016:22:36:05 +0100] [Job 87] Sending data to printer.
D [13/Jan/2016:22:36:05 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:05 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:05 +0100] [Job 87] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [13/Jan/2016:22:36:05 +0100] Discarding unused job-progress event...
D [13/Jan/2016:22:36:05 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:36:05 +0100] [Job 87] PID 488 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [13/Jan/2016:22:36:05 +0100] [Job 87] Printer make and model: Kyocera Mita FS-1010
D [13/Jan/2016:22:36:05 +0100] [Job 87] Running command line for pstops: pstops 87 ralf Freistellung.pdf 1 \'finishings=3 job-uuid=urn:uuid:c23a1cc5-be3e-381b-5ca2-2966735955eb job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1452720965 time-at-processing=1452720965 document-name-supplied=Freistellung.pdf\'
D [13/Jan/2016:22:36:05 +0100] [Job 87] Using image rendering resolution 600 dpi
D [13/Jan/2016:22:36:05 +0100] [Job 87] Deactivated compression of pages in Ghostscript\'s PostScript output (\"psdebug\" debug mode or Kyocera/Utax printer)
D [13/Jan/2016:22:36:05 +0100] [Job 87] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=2 -r600 -dCompressPages=false -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c \'save pop\' -f /var/spool/cups/tmp/001e9569bab97
D [13/Jan/2016:22:36:05 +0100] [Job 87] Started filter gs (PID 496)
D [13/Jan/2016:22:36:05 +0100] [Job 87] Started post-processing (PID 497)
D [13/Jan/2016:22:36:05 +0100] [Job 87] Started filter pstops (PID 498)
D [13/Jan/2016:22:36:05 +0100] [Job 87] Inserted workaround PostScript code for Kyocera and Utax printers
D [13/Jan/2016:22:36:05 +0100] [Job 87] Page = 595x842; 12,10 to 583,832
D [13/Jan/2016:22:36:05 +0100] [Job 87] slow_collate=0, slow_duplex=0, slow_order=0
D [13/Jan/2016:22:36:05 +0100] [Job 87] Before copy_comments - %!PS-Adobe-3.0
D [13/Jan/2016:22:36:05 +0100] [Job 87] %!PS-Adobe-3.0
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%BoundingBox: 0 0 595 842
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%HiResBoundingBox: 0 0 595.00 842.00
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%Creator: GPL Ghostscript 918 (ps2write)
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%LanguageLevel: 2
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%CreationDate: D:20160113223605+01\'00\'
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%Pages: 1
D [13/Jan/2016:22:36:05 +0100] [Job 87] %%EndComments
D [13/Jan/2016:22:36:05 +0100] [Job 87] Before copy_prolog - %%BeginProlog
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 4096 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 4096 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] PID 496 (gs) exited with no errors.
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:05 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] PID 497 (Post-processing) exited with no errors.
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 77 bytes of back-channel data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Before copy_setup - %%Page: 1 1
D [13/Jan/2016:22:36:13 +0100] [Job 87] Before page loop - %%Page: 1 1
D [13/Jan/2016:22:36:13 +0100] [Job 87] Copying page 1...
D [13/Jan/2016:22:36:13 +0100] [Job 87] PAGE: 1 1
D [13/Jan/2016:22:36:13 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:13 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:13 +0100] Discarding unused job-progress event...
D [13/Jan/2016:22:36:13 +0100] [Job 87] pagew = 571.0, pagel = 822.0
D [13/Jan/2016:22:36:13 +0100] [Job 87] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [13/Jan/2016:22:36:13 +0100] [Job 87] PageLeft = 12.0, PageRight = 583.0
D [13/Jan/2016:22:36:13 +0100] [Job 87] PageTop = 832.0, PageBottom = 10.0
D [13/Jan/2016:22:36:13 +0100] [Job 87] PageWidth = 595.0, PageLength = 842.0
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 1 pages...
D [13/Jan/2016:22:36:13 +0100] [Job 87] PID 498 (pstops) exited with no errors.
D [13/Jan/2016:22:36:13 +0100] [Job 87] PID 489 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 8192 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Read 5203 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Wrote 5203 bytes of print data...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Sent 377939 bytes...
D [13/Jan/2016:22:36:13 +0100] [Job 87] Waiting for read thread to exit...
D [13/Jan/2016:22:36:20 +0100] [Job 87] Read thread still active, aborting the pending read...
D [13/Jan/2016:22:36:21 +0100] [Job 87] PID 490 (/usr/lib/cups/backend/usb) exited with no errors.
D [13/Jan/2016:22:36:21 +0100] [Job 87] time-at-completed=1452720981
D [13/Jan/2016:22:36:21 +0100] Discarding unused job-completed event...
I [13/Jan/2016:22:36:21 +0100] [Job 87] Job completed.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:21 +0100] Discarding unused printer-state-changed event...
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 68] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 69] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 70] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 71] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 72] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 73] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 74] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 75] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 76] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 77] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 78] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 79] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 80] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 81] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 82] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 83] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 84] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 85] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:21 +0100] [Job 87] Removing document files.
D [13/Jan/2016:22:36:21 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:36:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Jan/2016:22:36:22 +0100] [Job 87] Unloading...
I [13/Jan/2016:22:36:36 +0100] Saving job.cache...
D [13/Jan/2016:22:36:36 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [13/Jan/2016:22:40:41 +0100] [Client 68] Accepted from localhost (Domain)
D [13/Jan/2016:22:40:41 +0100] [Client 68] Waiting for request.
D [13/Jan/2016:22:40:41 +0100] cupsdAddCert: Adding certificate for PID 0
D [13/Jan/2016:22:40:41 +0100] Report: clients=1
D [13/Jan/2016:22:40:41 +0100] Report: jobs=20
D [13/Jan/2016:22:40:41 +0100] Report: jobs-active=0
D [13/Jan/2016:22:40:41 +0100] Report: printers=2
D [13/Jan/2016:22:40:41 +0100] Report: stringpool-string-count=11779
D [13/Jan/2016:22:40:41 +0100] Report: stringpool-alloc-bytes=9616
D [13/Jan/2016:22:40:41 +0100] Report: stringpool-total-bytes=212480
D [13/Jan/2016:22:40:41 +0100] [Client 68] POST / HTTP/1.1
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Jan/2016:22:40:41 +0100] [Client 68] Read: status=200
D [13/Jan/2016:22:40:41 +0100] [Client 68] No authentication data provided.
D [13/Jan/2016:22:40:41 +0100] [Client 68] 2.0 Get-Jobs 1
D [13/Jan/2016:22:40:41 +0100] Get-Jobs ipp://localhost/
I [13/Jan/2016:22:40:41 +0100] [Client 68] Limiting Get-Jobs response to 500 jobs.
D [13/Jan/2016:22:40:41 +0100] [Job 68] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 69] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 70] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 71] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 72] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 73] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 74] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 75] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 76] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 77] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 78] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 79] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 80] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 81] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 82] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 83] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 84] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 85] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 86] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Job 87] Loading attributes...
D [13/Jan/2016:22:40:41 +0100] [Client 68] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [13/Jan/2016:22:40:41 +0100] [Client 68] Content-Length: 5907
D [13/Jan/2016:22:40:41 +0100] [Client 68] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Jan/2016:22:40:41 +0100] [Job 68] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [13/Jan/2016:22:40:41 +0100] [Job 69] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 70] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 71] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 72] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 73] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 74] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 75] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 76] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 77] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 78] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 79] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 80] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 81] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 82] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 83] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 84] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Job 85] Removing document files.
D [13/Jan/2016:22:40:41 +0100] cupsdMarkDirty(---J-)
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Client 68] con->http=0x559fb04f88c0
D [13/Jan/2016:22:40:41 +0100] [Client 68] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=5907, response=0x559fb04ef9b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Jan/2016:22:40:41 +0100] [Client 68] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Jan/2016:22:40:41 +0100] [Client 68] bytes=0, http_state=0, data_remaining=5907
D [13/Jan/2016:22:40:41 +0100] [Client 68] Flushing write buffer.
D [13/Jan/2016:22:40:41 +0100] [Client 68] New state is HTTP_STATE_WAITING
D [13/Jan/2016:22:40:41 +0100] [Client 68] Waiting for request.
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Jan/2016:22:40:41 +0100] [Client 68] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Jan/2016:22:40:41 +0100] [Client 68] Closing connection.
D [13/Jan/2016:22:40:41 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [13/Jan/2016:22:41:12 +0100] Saving job.cache...
D [13/Jan/2016:22:41:12 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"

Thanks again for looking into this, it drives me mad.

Cheers,
Lokesh

lokesh987 · 2016-01-14 14:42:22

the output of lpstat -W all -o

Kyocera-FS-1010-68      lokesh              1024   Sun 03 Jan 2016 15:00:26 CET
Virtual_PDF_Printer-69  lokesh            343040   Sun 03 Jan 2016 15:15:19 CET
Kyocera-FS-1010-70      anonymous         1024   Fri 08 Jan 2016 11:08:35 CET
Kyocera-FS-1010-71      lokesh             26624   Fri 08 Jan 2016 11:17:41 CET
Kyocera-FS-1010-72      anonymous         1024   Fri 08 Jan 2016 11:19:09 CET
Kyocera-FS-1010-73      anonymous         1024   Fri 08 Jan 2016 11:20:41 CET
Kyocera-FS-1010-74      anonymous         1024   Fri 08 Jan 2016 11:21:22 CET
Kyocera-FS-1010-75      anonymous         1024   Fri 08 Jan 2016 11:22:56 CET
Kyocera-FS-1010-76      anonymous         1024   Fri 08 Jan 2016 11:23:29 CET
Kyocera-FS-1010-77      anonymous         1024   Fri 08 Jan 2016 11:32:46 CET
Kyocera-FS-1010-78      lokesh              1024   Fri 08 Jan 2016 12:08:45 CET
Kyocera-FS-1010-79      lokesh             39936   Fri 08 Jan 2016 12:11:11 CET
Kyocera-FS-1010-80      anonymous         1024   Fri 08 Jan 2016 12:12:20 CET
Kyocera-FS-1010-81      anonymous         1024   Fri 08 Jan 2016 14:53:50 CET
Kyocera-FS-1010-82      anonymous         1024   Fri 08 Jan 2016 14:56:17 CET
Kyocera-FS-1010-83      anonymous         1024   Tue 12 Jan 2016 10:50:22 CET
Kyocera-FS-1010-84      anonymous         1024   Tue 12 Jan 2016 10:56:17 CET
Kyocera-FS-1010-85      anonymous         1024   Tue 12 Jan 2016 13:40:14 CET
Kyocera-FS-1010-86      lokesh            221184   Wed 13 Jan 2016 13:51:35 CET
Kyocera-FS-1010-87      lokesh            120832   Wed 13 Jan 2016 22:36:05 CET

A user "anonymus" does not exits on my computer to my knowledge...

paulkerry · 2016-01-14 21:33:49

I looked through your log relating to "job 87" and I can see nothing wrong at all. All of the filtering stages appear to work correctly at your printer server end and the job then gets pushed out OK to the printer.

Can you change any settings on the printer itself? Thinking on the lines of reducing the dpi or quality perhaps to see if it it's a memory issue?

lokesh987 · 2016-01-15 16:17:41

paulkerry wrote:

Can you change any settings on the printer itself? Thinking on the lines of reducing the dpi or quality perhaps to see if it it's a memory issue?

I followed your advice and changed some settings for the printer, i.e.

resolution to 300 dpi

KIR to off (I think it is for font smoothing or anti-aliasing)

EcoPrint to off (draft modus)

Printing a test page from the CUPS web-frontend does not improve, however, from within programs (and console) I could print pdfs, and various text files. Of course, at an inacceptable quality.

So I gradually changed everything back, finally ending up with the same trouble as before. For a short while even at the highest possible resolution. I need to look into this more systematically tomorrow. It seems to me that a certain combi of KIR and print quality does not work.

Still, I do not understand why CUPS under OSX, Debian, and Puppy Linux works like a charm with the printer defaults, but does not so under Arch Linux. Something must be different. I dont think it is the poppler/ghostscript thing, as printing to file works without any problems. But I might be wrong, of course...

I shall get back tomorrow.

Lokesh

paulkerry · 2016-01-17 16:37:57

As some jobs come out, I'm suspecting this is some kind of driver issue. Can you repeat the tests with the built-in postscript cups driver (in the cups web interface, this is under "Generic" then "Generic PostScript Printer")?

Last edited by paulkerry (2016-01-17 16:38:44)

lokesh987 · 2016-01-18 15:58:11

@Paul Kerry and Docbroke: thank you very much for your explanations. They helped me to find a partial solution (at the end of my reply).

I tried several things:

using the Generic PostScript Printer ppd

changing the printer settings: resolution, font aliasing, ecoprint

using different programs to print

using different files

I printed a simple pdf file from Gwenview (my pdf viewer): works
same file from the command line (lpr): fail
LibreOffice file with text and graphics from within LO: fail
same file from the command line (lpr): fail
changing the printer quality settings: no difference

(I noticed a big difference in the print file size. When using the command line, it was about 10x smaller than that from Gwenview or LO. We're talking about 21k vs. 216k, so most likely this is not the killer argument).

The results took me back to the above comments of Paul Kerry and Docbroke

paulkerry wrote:

The older systems you mention might be using poppler as the backend instead of ghostscript.

A search finally got me here, giving instructions to switch between ghostscript an poppler:

sudo lpadmin -p <printer> -o pdftops-renderer-default=pdftops
(lpstat -v to show printers' names)

.

Result: Since then printing from the programs (tested: Gwenview, LO, Chromium] works. It still does not from the command line nor the CUPS web interface for a Test page.

I am not 100% satisfied because of the strange difference between command line and GUI. But I could live with it. I remain still interessted in understanding this issue.

Cheers
Lokesh

lokesh987 · 2016-01-19 11:45:12

Just to add another result of a test:
I installed zathura with two different plugins and printed the same file from it.

A) with zathura-pdf-mupdf plugin
result was in an acceptable quality, but took veeery long to print (about 1-2 min for 2 pages)

b) with the zathura-pdf-poppler plugin
resulted in better quality as A) (more shades of grey), fast printing, less than 10s.

Whatever that means. Since the result of the default pdf viewer Okular is in between the two: quality like B), printing speed like A), I will change my default viewer for pdf to zathura with poppler plugin.

Seems that my printer likes poppler. I just dont understand the reason.

Cheers
Lokesh

turbopollux · 2016-01-19 20:57:00

Maybe you use wrong printing protocol for this printer? Best way to tune ur printer that see MacOS instruction for this printer on official site KyoCera and use same settings! Good luck!

lokesh987 · 2016-01-20 13:48:59

turbopollux wrote:

Maybe you use wrong printing protocol for this printer? Best way to tune ur printer that see MacOS instruction for this printer on official site KyoCera and use same settings! Good luck!

I checked the site carefully and did not find any MacOS specific instructions. Can you provide a link to what you are referring to?

Lokesh

paulkerry · 2016-01-20 19:25:53

lokesh987 wrote:

Seems that my printer likes poppler. I just dont understand the reason.
Cheers
Lokesh

That is weird - I don't understand that at all I'm afraid!

I've had a look at your Kyocera link and then clicked on the Documentation tab - in the "Installation Guide", it says...

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION
MODE. The printer is factory-set to emulate the HP PCL 6. The emulation mode can be changed by
following the procedures described in the Operation Guide contained as an electronic file in the
Kyocera Mita Digital Library CD-ROM supplied with the printer.

so perhaps this is what @turbopollux is referring to?

If the hardware is or can be set to PCL, then it might work more successfully by using the generic PCL driver?

Last edited by paulkerry (2016-01-20 19:53:30)

lokesh987 · 2016-01-22 12:10:11

paulkerry wrote:

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION
MODE. The printer is factory-set to emulate the HP PCL 6. The emulation mode can be changed by
following the procedures described in the Operation Guide contained as an electronic file in the
Kyocera Mita Digital Library CD-ROM supplied with the printer.

That's not entirely correct, the parallel port ist set by default to PCL6 while the usb port is to KPDL2 (aka Postscript level 2). But thanks anyway, this is something I have not yet looked into as a GUI control exists only for Windows. Found out how to change it directly on the terminal:

su (sudo will not work)
echo -en '!R! FRPO P1, 9; EXIT' > /dev/usblp0

sets the emulation to Postscript. This is what the ppd file in use says:

*% Basic Device Capabilities
*LanguageLevel: "2"
*ColorDevice: False
*DefaultColorSpace: Gray
*TTRasterizer: Type42 "

which I believe means "use PS level 2. However, no difference (works from GUI programs but not from terminal and CUPS web-frontend). Then switched back to use ghostscript instead of poppler: same situation as on the beginning, i.e. complete failure.

I haven't yet tested the combination suggested by paulkerry

paulkerry wrote:

If the hardware is or can be set to PCL, then it might work more successfully by using the generic PCL driver?

Will do that next ...

lokesh987 · 2016-01-24 17:11:27

It seems that the problem is solved!

changed the printer's emulation from KPDL2 (=PS level2) to PCL 6

changed the printer driver from a postscript PPD to a PCL 6 PPD

switched back to using ghostscript as pdttops renderer

The tests were hampered by the fact that it had been unclear to me that I have to turn off/on the printer each time to apply changes to the printer emulation and to restart the cups service whenever I change the filter. Probably obvious for geeks...

Here the details:

su (sudo will not work)
echo -en '!R! FRPO P1, 9; EXIT' > /dev/usblp0
turn off/on printer to apply setting

AND: Changed the printer PPD to use a Generic PCL 6 driver
Remember: the pdftops renderer was set to poppler.
Result:

printing Test page from Cups: works (YEAH!!!! Very first time)

Text file including images: works

PDF file: only crap

sudo lpadmin -p <printer> -o pdftops-renderer-default=gs
sudo systemctl stop org.cups.cupsd.service
sudo systemctl start org.cups.cupsd.service

AND, the outcome is: everything works so far, printing text, selections on websites, pdfs, test pages ... can't believe it after all, I have seen so many frustrated posts about similiar issues, and if at all, a positive outcome could never be attributed to discrete changes in the settings. Hence the extensive codes and descriptions here.

So my printer,despite being a Postscript printer, does not work with Postscript PPDs under CUPS (though it does in system as described at the beginning of the thread). So, problem solved.

Thanks a million to paulkerry for your useful comments.

Lokesh

paulkerry · 2016-01-24 17:29:14

Great - really pleased everything is working and you are sorted! :-)

Arch Linux

#1 2016-01-08 11:14:27

[solved]CUPS not printing on Kyocera FS-1010 - filter problem

#2 2016-01-08 16:10:42

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#3 2016-01-11 15:24:16

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#4 2016-01-11 16:44:25

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#5 2016-01-12 10:18:16

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#6 2016-01-12 11:00:11

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#7 2016-01-12 12:18:42

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#8 2016-01-12 13:02:34

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#9 2016-01-13 19:18:56

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#10 2016-01-13 21:51:10

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#11 2016-01-14 14:42:22

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#12 2016-01-14 21:33:49

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#13 2016-01-15 16:17:41

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#14 2016-01-17 16:37:57

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#15 2016-01-18 15:58:11

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#16 2016-01-19 11:45:12

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#17 2016-01-19 20:57:00

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#18 2016-01-20 13:48:59

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#19 2016-01-20 19:25:53

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#20 2016-01-22 12:10:11

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#21 2016-01-24 17:11:27

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

#22 2016-01-24 17:29:14

Re: [solved]CUPS not printing on Kyocera FS-1010 - filter problem

Board footer