You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2016-01-09 18:30:07
- Eramthin
- Member
- From: Ohio
- Registered: 2016-01-09
- Posts: 5
^@ characters inserted in console
I have been using Arch Linux for several years now and I've never run into a problem I couldn't find on the forums until now. Whenever I boot my laptop the characters ^@ are inserted into the login prompt (not sure what it's called), and I have to delete them with backspace before logging in. This is a very minor problem but still annoying because sometimes there will be a delay and the ^@ characters will be inserted as I'm typing my password making it incorrect. A single press of the backspace will remove both characters and I usually have to wait for them to show up before logging in. This only happens after the computer is first booted up.
It looks like this...
hostname login: ^@
And sometimes it gets me when I'm typing like so...
hostname login: usern^@ame
Password:
Login incorrect
This is really getting on my nerves so any help on how I can fix this would be greatly appreciated. Arch Linux is by far my favorite distro and I love everything about it, but this bug has to go...
Last edited by Eramthin (2016-01-09 23:17:12)
Offline
#2 2016-01-09 18:36:09
- Eramthin
- Member
- From: Ohio
- Registered: 2016-01-09
- Posts: 5
Re: ^@ characters inserted in console
Oh and btw here is my lspci and dmesg. I'm not sure what else would be useful.
lspci
00:00.0 RAM memory: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: NVIDIA Corporation Device 075e (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB controller: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB controller: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB controller: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB controller: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: NVIDIA Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:14.0 PCI bridge: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 11h Processor Link Control
02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8200M G] (rev a2)
07:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.3-2-ARCH (builduser@tobias) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Dec 23 20:09:18 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw initrd=../initramfs-linux.img
[ 0.000000] tseg: 00aff00000
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afecffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afed0000-0x00000000afee4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afee5000-0x00000000afee5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afee6000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP G60 Notebook PC/303C, BIOS F.31 10/17/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-protect
[ 0.000000] E0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xafed0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7ff0-0x000f7fff] mapped at [ffff8800000f7ff0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[ 0.000000] [mem 0x120000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafecffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xafdfffff] page 2M
[ 0.000000] [mem 0xafe00000-0xafecffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fca8000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F30 000024 (v03 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000AFEDDDA1 00005C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000AFEE4901 0000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 0x00000000AFEDDDFD 006A90 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000AFEE5FC0 000040
[ 0.000000] ACPI: FACS 0x00000000AFEE5FC0 000040
[ 0.000000] ACPI: SLIC 0x00000000AFEE49F5 000176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001)
[ 0.000000] ACPI: MCFG 0x00000000AFEE4B6B 00003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000AFEE4BA7 000038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 0x00000000AFEE4BDF 000072 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000AFEE4C51 000028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AFEE4C79 000387 (v01 HPQOEM SLIC-MP 06040000 00000150)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000afecffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 982637
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11196 pages used for memmap
[ 0.000000] DMA32 zone: 716496 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafed0000-0xafee4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafee5000-0xafee5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafee6000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013fc00000 s92824 r8192 d30056 u1048576
[ 0.000000] pcpu-alloc: s92824 r8192 d30056 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 967260
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3787476K/3930548K available (5666K kernel code, 937K rwdata, 1796K rodata, 1188K init, 1164K bss, 143072K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1999.863 MHz processor
[ 0.000071] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.38 BogoMIPS (lpj=6666210)
[ 0.000075] pid_max: default: 32768 minimum: 301
[ 0.000086] ACPI: Core revision 20150818
[ 0.006207] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.006244] Security Framework initialized
[ 0.006247] Yama: becoming mindful.
[ 0.006745] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009557] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010871] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010881] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011280] Initializing cgroup subsys io
[ 0.011290] Initializing cgroup subsys memory
[ 0.011303] Initializing cgroup subsys devices
[ 0.011308] Initializing cgroup subsys freezer
[ 0.011313] Initializing cgroup subsys net_cls
[ 0.011317] Initializing cgroup subsys pids
[ 0.011347] CPU: Physical Processor ID: 0
[ 0.011349] CPU: Processor Core ID: 0
[ 0.011351] mce: CPU supports 5 MCE banks
[ 0.011363] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.011365] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.011854] Freeing SMP alternatives memory: 20K (ffffffff81a15000 - ffffffff81a1a000)
[ 0.425181] ftrace: allocating 22571 entries in 89 pages
[ 0.442332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.580355] smpboot: CPU0: AMD Turion Dual-Core RM-70 (family: 0x11, model: 0x3, stepping: 0x1)
[ 0.580394] Performance Events: AMD PMU driver.
[ 0.580401] ... version: 0
[ 0.580403] ... bit width: 48
[ 0.580404] ... generic registers: 4
[ 0.580406] ... value mask: 0000ffffffffffff
[ 0.580407] ... max period: 00007fffffffffff
[ 0.580408] ... fixed-purpose events: 0
[ 0.580410] ... event mask: 000000000000000f
[ 0.600433] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.610776] x86: Booting SMP configuration:
[ 0.610779] .... node #0, CPUs: #1
[ 0.623860] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.623862] Measured 1127664784 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.623868] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.623920] x86: Booted up 1 node, 2 CPUs
[ 0.623923] smpboot: Total of 2 processors activated (8002.76 BogoMIPS)
[ 0.624756] devtmpfs: initialized
[ 0.114301] PM: Registering ACPI NVS region [mem 0xafee5000-0xafee5fff] (4096 bytes)
[ 0.114301] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.114301] pinctrl core: initialized pinctrl subsystem
[ 0.114301] RTC time: 18:04:41, date: 01/09/16
[ 0.114301] NET: Registered protocol family 16
[ 0.126673] cpuidle: using governor ladder
[ 0.140532] cpuidle: using governor menu
[ 0.140550] TOM: 00000000c0000000 aka 3072M
[ 0.140554] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.140562] TOM2: 0000000140000000 aka 5120M
[ 0.140671] Simple Boot Flag at 0x38 set to 0x1
[ 0.140771] ACPI: bus type PCI registered
[ 0.140775] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.140877] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
[ 0.140881] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
[ 0.140895] PCI: Using configuration type 1 for base access
[ 0.153749] ACPI: Added _OSI(Module Device)
[ 0.153749] ACPI: Added _OSI(Processor Device)
[ 0.153749] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153749] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.158365] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.158713] ACPI : EC: EC started
[ 0.166715] ACPI: Interpreter enabled
[ 0.166727] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[ 0.166734] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.166752] ACPI: (supports S0 S3 S4 S5)
[ 0.166755] ACPI: Using IOAPIC for interrupt routing
[ 0.166789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.187926] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.187937] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.188067] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME PCIeCapability]
[ 0.188126] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.188130] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.188133] acpi PNP0A08:00: _OSC: platform willing to grant [AER]
[ 0.188136] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.188223] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
[ 0.188229] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-07] only partially covers this bridge
[ 0.188440] PCI host bridge to bus 0000:00
[ 0.188445] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.188448] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.188451] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.188454] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.188457] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.188460] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.188463] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.188466] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.188469] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.188471] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.188474] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.188477] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.188480] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.188483] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.188485] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.188488] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.188491] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.188523] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
[ 0.188848] pci 0000:00:01.0: [10de:075e] type 00 class 0x060100
[ 0.188862] pci 0000:00:01.0: reg 0x10: [io 0x1a00-0x1aff]
[ 0.188999] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
[ 0.189021] pci 0000:00:01.1: reg 0x10: [io 0x3080-0x30bf]
[ 0.189047] pci 0000:00:01.1: reg 0x20: [io 0x3040-0x307f]
[ 0.189056] pci 0000:00:01.1: reg 0x24: [io 0x3000-0x303f]
[ 0.189084] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.189201] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
[ 0.189228] pci 0000:00:01.3: reg 0x10: [mem 0xc0080000-0xc00fffff]
[ 0.189429] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
[ 0.189585] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
[ 0.189605] pci 0000:00:02.0: reg 0x10: [mem 0xc0006000-0xc0006fff]
[ 0.189657] pci 0000:00:02.0: supports D1 D2
[ 0.189659] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189765] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
[ 0.189787] pci 0000:00:02.1: reg 0x10: [mem 0xc0007000-0xc00070ff]
[ 0.189843] pci 0000:00:02.1: supports D1 D2
[ 0.189845] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189958] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
[ 0.189977] pci 0000:00:04.0: reg 0x10: [mem 0xc0008000-0xc0008fff]
[ 0.190039] pci 0000:00:04.0: supports D1 D2
[ 0.190042] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190146] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
[ 0.190168] pci 0000:00:04.1: reg 0x10: [mem 0xc0007400-0xc00074ff]
[ 0.190225] pci 0000:00:04.1: supports D1 D2
[ 0.190228] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190342] pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
[ 0.190383] pci 0000:00:06.0: reg 0x20: [io 0x30c0-0x30cf]
[ 0.190400] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.190403] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.190406] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.190408] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.190509] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
[ 0.190534] pci 0000:00:07.0: reg 0x10: [mem 0xc0000000-0xc0003fff]
[ 0.190590] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.190645] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.190703] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
[ 0.190798] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.190857] pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185
[ 0.190880] pci 0000:00:09.0: reg 0x10: [io 0x30f0-0x30f7]
[ 0.190888] pci 0000:00:09.0: reg 0x14: [io 0x30e4-0x30e7]
[ 0.190895] pci 0000:00:09.0: reg 0x18: [io 0x30e8-0x30ef]
[ 0.190903] pci 0000:00:09.0: reg 0x1c: [io 0x30e0-0x30e3]
[ 0.190910] pci 0000:00:09.0: reg 0x20: [io 0x30d0-0x30df]
[ 0.190918] pci 0000:00:09.0: reg 0x24: [mem 0xc0004000-0xc0005fff]
[ 0.191035] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
[ 0.191059] pci 0000:00:0a.0: reg 0x10: [mem 0xc0009000-0xc0009fff]
[ 0.191066] pci 0000:00:0a.0: reg 0x14: [io 0x30f8-0x30ff]
[ 0.191074] pci 0000:00:0a.0: reg 0x18: [mem 0xc0007c00-0xc0007cff]
[ 0.191082] pci 0000:00:0a.0: reg 0x1c: [mem 0xc0007800-0xc000780f]
[ 0.191118] pci 0000:00:0a.0: supports D1 D2
[ 0.191120] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191174] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.191231] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
[ 0.191276] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191423] pci 0000:00:14.0: [10de:077a] type 01 class 0x060400
[ 0.191640] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191781] pci 0000:00:18.0: [1022:1300] type 00 class 0x060000
[ 0.191895] pci 0000:00:18.1: [1022:1301] type 00 class 0x060000
[ 0.192001] pci 0000:00:18.2: [1022:1302] type 00 class 0x060000
[ 0.192109] pci 0000:00:18.3: [1022:1303] type 00 class 0x060000
[ 0.192222] pci 0000:00:18.4: [1022:1304] type 00 class 0x060000
[ 0.192416] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.192425] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.192428] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.192431] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.192434] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.192437] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.192440] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.192443] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.192446] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.192449] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.192452] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.192455] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.192458] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.192461] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.192464] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.192467] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.192470] pci 0000:00:08.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.192532] pci 0000:02:00.0: [10de:0845] type 00 class 0x030000
[ 0.192551] pci 0000:02:00.0: reg 0x10: [mem 0xc1000000-0xc1ffffff]
[ 0.192562] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.192573] pci 0000:02:00.0: reg 0x1c: [mem 0xc4000000-0xc5ffffff 64bit pref]
[ 0.192580] pci 0000:02:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.192588] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.192685] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.192691] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.192695] pci 0000:00:0b.0: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.192701] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.192849] pci 0000:07:00.0: [168c:001c] type 00 class 0x020000
[ 0.192892] pci 0000:07:00.0: reg 0x10: [mem 0xc2000000-0xc200ffff 64bit]
[ 0.193053] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193069] pci 0000:00:14.0: PCI bridge to [bus 07]
[ 0.193091] pci 0000:00:14.0: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.193625] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.193643] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.193749] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.193854] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.193960] ACPI: PCI Interrupt Link [Z012] (IRQs 19 20 21 22 23) *10
[ 0.194065] ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.196679] ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.196786] ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.196891] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
[ 0.196993] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
[ 0.197095] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[ 0.197197] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
[ 0.197301] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
[ 0.197404] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
[ 0.197509] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.197613] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11
[ 0.197716] ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.197820] ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5
[ 0.197922] ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10
[ 0.198024] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
[ 0.198219] ACPI : EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
[ 0.198370] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.198370] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.198370] vgaarb: loaded
[ 0.198370] vgaarb: bridge control possible 0000:02:00.0
[ 0.198370] PCI: Using ACPI for IRQ routing
[ 0.198370] PCI: pci_cache_line_size set to 64 bytes
[ 0.198370] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.198370] e820: reserve RAM buffer [mem 0xafed0000-0xafffffff]
[ 0.198370] NetLabel: Initializing
[ 0.198370] NetLabel: domain hash size = 128
[ 0.198370] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.198370] NetLabel: unlabeled traffic allowed by default
[ 0.198370] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.198370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.198370] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.206704] clocksource: Switched to clocksource hpet
[ 0.217508] pnp: PnP ACPI init
[ 0.217773] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.217781] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217858] system 00:01: [io 0x0360-0x0361] has been reserved
[ 0.217862] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.217866] system 00:01: [mem 0xff800000-0xff800fff] has been reserved
[ 0.217870] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217930] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.217986] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.218034] pnp 00:04: Plug and Play ACPI device, IDs SYN0158 SYN0300 SYN0002 PNP0f13 (active)
[ 0.220689] system 00:05: [io 0x1000-0x107f] could not be reserved
[ 0.220693] system 00:05: [io 0x1080-0x10ff] has been reserved
[ 0.220696] system 00:05: [io 0x1200-0x127f] has been reserved
[ 0.220699] system 00:05: [io 0x1280-0x12ff] has been reserved
[ 0.220703] system 00:05: [io 0x1400-0x147f] has been reserved
[ 0.220706] system 00:05: [io 0x1480-0x14ff] has been reserved
[ 0.220710] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221154] system 00:06: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.221158] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.221161] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.221165] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.221168] system 00:06: [mem 0xfef00000-0xfef00fff] has been reserved
[ 0.221172] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.221181] pnp: PnP ACPI: found 7 devices
[ 0.236564] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.236619] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.236638] pci 0000:02:00.0: BAR 6: assigned [mem 0xc6000000-0xc601ffff pref]
[ 0.236642] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.236646] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.236651] pci 0000:00:0b.0: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.236655] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.236903] pci 0000:00:14.0: PCI bridge to [bus 07]
[ 0.236915] pci 0000:00:14.0: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.236937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.236940] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.236943] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.236946] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.236949] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.236952] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.236955] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.236958] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.236961] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.236964] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.236967] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.236970] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.236973] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.236975] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.236978] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.236981] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff window]
[ 0.236985] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.236988] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.236991] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.236994] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.236997] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.237000] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.237003] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.237006] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.237009] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.237012] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.237015] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.237018] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.237021] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.237024] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.237027] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.237030] pci_bus 0000:01: resource 19 [mem 0xc0000000-0xfebfffff window]
[ 0.237033] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.237036] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 0.237039] pci_bus 0000:02: resource 2 [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.237042] pci_bus 0000:07: resource 1 [mem 0xc2000000-0xc20fffff]
[ 0.237108] NET: Registered protocol family 2
[ 0.237357] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.237549] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.237826] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.237919] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.237965] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.238098] NET: Registered protocol family 1
[ 0.343727] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.343847] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.343974] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.344105] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.344239] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.344316] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.344323] PCI: CLS 0 bytes, default 64
[ 0.344424] Unpacking initramfs...
[ 0.434294] Freeing initrd memory: 3424K (ffff88007fca8000 - ffff880080000000)
[ 0.434312] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.434316] software IO TLB [mem 0xabed0000-0xafed0000] (64MB) mapped at [ffff8800abed0000-ffff8800afecffff]
[ 0.434484] microcode: CPU0: patch_level=0x02000032
[ 0.434500] microcode: CPU1: patch_level=0x02000032
[ 0.434564] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a759b8312, max_idle_ns: 881590408507 ns
[ 0.434652] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.434717] Scanning for low memory corruption every 60 seconds
[ 0.435073] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.435418] Initialise system trusted keyring
[ 0.435571] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.438263] zbud: loaded
[ 0.438558] VFS: Disk quotas dquot_6.6.0
[ 0.438617] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.438885] Key type big_key registered
[ 0.440262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.440491] io scheduler noop registered
[ 0.440496] io scheduler deadline registered
[ 0.440553] io scheduler cfq registered (default)
[ 0.440955] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23
[ 0.441137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.441148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.441221] GHES: HEST is not enabled!
[ 0.441326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.442256] Linux agpgart interface v0.103
[ 0.442637] rtc_cmos 00:02: RTC can wake from S4
[ 0.443014] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.443082] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.443099] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.443921] NET: Registered protocol family 10
[ 0.444199] NET: Registered protocol family 17
[ 0.444978] registered taskstats version 1
[ 0.444993] Loading compiled-in X.509 certificates
[ 0.445023] zswap: loaded using pool lzo/zbud
[ 0.445610] Magic number: 0:68:89
[ 0.445763] rtc_cmos 00:02: setting system clock to 2016-01-09 18:04:41 UTC (1452362681)
[ 0.445857] PM: Hibernation image not present or could not be loaded.
[ 0.446748] Freeing unused kernel memory: 1188K (ffffffff818ec000 - ffffffff81a15000)
[ 0.446754] Write protecting the kernel read-only data: 8192k
[ 0.447334] Freeing unused kernel memory: 464K (ffff88000158c000 - ffff880001600000)
[ 0.447632] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000)
[ 0.461662] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.532699] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.554100] i8042: Detected active multiplexing controller, rev 1.1
[ 0.568089] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.568097] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.568100] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.568103] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.568106] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.580841] ACPI: bus type USB registered
[ 0.580889] usbcore: registered new interface driver usbfs
[ 0.580905] usbcore: registered new interface driver hub
[ 0.580935] usbcore: registered new device driver usb
[ 0.581658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.581902] ehci-pci: EHCI PCI platform driver
[ 0.582195] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[ 0.582272] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.582284] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.582300] ehci-pci 0000:00:02.1: debug port 1
[ 0.582336] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.582364] ehci-pci 0000:00:02.1: irq 17, io mem 0xc0007000
[ 0.584967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.585203] ohci-pci: OHCI PCI platform driver
[ 0.590036] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.590322] hub 1-0:1.0: USB hub found
[ 0.590334] hub 1-0:1.0: 3 ports detected
[ 0.590766] ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
[ 0.590833] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 0.590843] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.590856] ehci-pci 0000:00:04.1: debug port 1
[ 0.590892] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 0.590920] ehci-pci 0000:00:04.1: irq 16, io mem 0xc0007400
[ 0.600025] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.600274] hub 2-0:1.0: USB hub found
[ 0.600285] hub 2-0:1.0: 4 ports detected
[ 0.600874] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 0.600916] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.600925] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.600961] ohci-pci 0000:00:02.0: irq 17, io mem 0xc0006000
[ 0.605124] SCSI subsystem initialized
[ 0.607845] libata version 3.00 loaded.
[ 0.656359] hub 3-0:1.0: USB hub found
[ 0.656381] hub 3-0:1.0: 3 ports detected
[ 0.656594] pata_amd 0000:00:06.0: version 0.4.1
[ 0.659291] scsi host0: pata_amd
[ 0.662510] scsi host1: pata_amd
[ 0.663110] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 0.663114] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 0.663609] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 0.663639] ahci 0000:00:09.0: version 3.0
[ 0.663684] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 0.663796] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
[ 0.663801] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part boh
[ 0.666019] scsi host2: ahci
[ 0.668320] scsi host3: ahci
[ 0.668440] ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 24
[ 0.668443] ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 24
[ 0.670195] ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
[ 0.670252] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 0.670270] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.670306] ohci-pci 0000:00:04.0: irq 16, io mem 0xc0008000
[ 0.702455] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.726202] hub 4-0:1.0: USB hub found
[ 0.726218] hub 4-0:1.0: 4 ports detected
[ 0.836218] ata2: port disabled--ignoring
[ 0.940546] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.993382] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.993639] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 1.000028] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.001229] ata4.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 1.001232] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.002960] ata4.00: configured for UDMA/100
[ 1.007588] ata3.00: ATAPI: Slimtype DVD A DS8A2L-A, 7H63, max UDMA/100
[ 1.022907] ata3.00: configured for UDMA/100
[ 1.033596] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A2L-A 7H63 PQ: 0 ANSI: 5
[ 1.045874] scsi 3:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 1A13 PQ: 0 ANSI: 5
[ 1.069786] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.069795] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.070078] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.070444] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.070525] sd 3:0:0:0: [sda] Write Protect is off
[ 1.070529] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.070561] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.082300] usbcore: registered new interface driver usb-storage
[ 1.082782] usbcore: registered new interface driver uas
[ 1.083199] ums-realtek 1-1:1.0: USB Mass Storage device detected
[ 1.090986] scsi host4: usb-storage 1-1:1.0
[ 1.091150] usbcore: registered new interface driver ums-realtek
[ 1.113430] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 1.134718] sda: sda1 sda2 sda3 sda4
[ 1.135559] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.330095] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.342336] usbcore: registered new interface driver usbhid
[ 1.342342] usbhid: USB HID core driver
[ 2.014523] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.093211] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.098160] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.401492] random: nonblocking pool is initialized
[ 3.548658] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.604922] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.605199] systemd[1]: Detected architecture x86-64.
[ 3.636431] systemd[1]: Set hostname to <Audeamus>.
[ 5.221914] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.222850] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.224043] systemd[1]: Created slice User and Session Slice.
[ 5.224524] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.224941] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.225334] systemd[1]: Reached target Remote File Systems.
[ 5.225755] systemd[1]: Listening on Journal Socket.
[ 5.226199] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.278544] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.279066] systemd[1]: Listening on udev Kernel Socket.
[ 5.279707] systemd[1]: Created slice System Slice.
[ 5.281087] systemd[1]: Mounting Debug File System...
[ 5.353809] systemd[1]: Mounting Temporary Directory...
[ 5.355399] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.357099] systemd[1]: Starting Journal Service...
[ 5.358707] systemd[1]: Starting Setup Virtual Console...
[ 5.360435] systemd[1]: Mounting Huge Pages File System...
[ 5.845488] systemd[1]: Starting Apply Kernel Variables...
[ 5.845873] systemd[1]: Reached target Slices.
[ 5.846285] systemd[1]: Reached target Encrypted Volumes.
[ 5.847925] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.850782] systemd[1]: Mounting Configuration File System...
[ 5.851263] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.154849] systemd[1]: Created slice system-getty.slice.
[ 6.155875] systemd[1]: Listening on udev Control Socket.
[ 6.157558] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.158287] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.158769] systemd[1]: Reached target Paths.
[ 6.161880] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.162386] systemd[1]: Mounted Huge Pages File System.
[ 6.162773] systemd[1]: Mounted Debug File System.
[ 6.163152] systemd[1]: Mounted Configuration File System.
[ 6.163593] systemd[1]: Mounted Temporary Directory.
[ 6.164813] systemd[1]: Started Setup Virtual Console.
[ 6.165736] systemd[1]: Started Apply Kernel Variables.
[ 6.166467] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.208946] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 6.210314] systemd[1]: Started Remount Root and Kernel File Systems.
[ 6.212008] systemd[1]: Starting Load/Save Random Seed...
[ 6.213835] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.306742] systemd[1]: Starting udev Coldplug all Devices...
[ 6.377066] systemd[1]: Started Load/Save Random Seed.
[ 6.484935] systemd[1]: Started udev Coldplug all Devices.
[ 7.134867] systemd[1]: Started Create Static Device Nodes in /dev.
[ 7.135480] systemd[1]: Reached target Local File Systems (Pre).
[ 7.137039] systemd[1]: Starting udev Kernel Device Manager...
[ 7.982406] systemd[1]: Started udev Kernel Device Manager.
[ 8.263253] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.362177] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 8.363061] ACPI: Lid Switch [LID0]
[ 8.363185] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 8.363191] ACPI: Sleep Button [SLPB]
[ 8.363281] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 8.363285] ACPI: Power Button [PWRB]
[ 8.363383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 8.363387] ACPI: Power Button [PWRF]
[ 8.396667] ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 18
[ 8.397036] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.397069] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 8.411134] wmi: Mapper loaded
[ 8.458018] systemd[1]: Started Journal Service.
[ 8.477104] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.509300] ACPI: Battery Slot [BAT0] (battery present)
[ 8.517063] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.517074] ACPI: Thermal Zone [TZS0] (89 C)
[ 8.525610] acpi device:0b: registered as cooling_device0
[ 8.525820] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input9
[ 8.533094] thermal LNXTHERM:01: registered as thermal_zone1
[ 8.533104] ACPI: Thermal Zone [TZS1] (89 C)
[ 8.587631] ACPI: AC Adapter [ADP1] (on-line)
[ 8.815329] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 8.901409] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 8.956315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.121436] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 9.121498] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 9.644484] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:4d:df:de
[ 9.644493] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
[ 9.951008] [drm] Initialized drm 1.1.0 20060810
[ 10.370448] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 10.370525] snd_hda_intel 0000:00:07.0: Disabling MSI
[ 10.632967] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 10.717503] ath5k 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.717642] ath5k 0000:07:00.0: registered as 'phy0'
[ 11.247472] ath: EEPROM regdomain: 0x64
[ 11.247483] ath: EEPROM indicates we should expect a direct regpair map
[ 11.247490] ath: Country alpha2 being used: 00
[ 11.247494] ath: Regpair used: 0x64
[ 11.307704] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.308184] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 11.445126] input: HP WMI hotkeys as /devices/virtual/input/input13
[ 11.463523] psmouse serio2: synaptics: queried max coordinates: x [..5592], y [..4916]
[ 11.512840] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000/0x0, board id: 0, fw id: 502777
[ 11.578611] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 11.665401] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 11.743422] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 11.743447] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.743462] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 11.743473] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 11.743483] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 11.743496] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 11.743507] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x17
[ 11.850283] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 11.916093] kvm: disabled by bios
[ 11.925464] forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
[ 11.938577] ath5k 0000:07:00.0 wlp7s0: renamed from wlan0
[ 11.941346] kvm: disabled by bios
[ 11.973156] mousedev: PS/2 mouse device common for all mice
[ 12.298709] fuse init (API version 7.23)
[ 12.426593] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/0003:045E:0053.0001/input/input19
[ 12.427260] hid-generic 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:04.0-1/input0
[ 12.754270] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input16
[ 12.754604] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input17
[ 12.754689] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input18
[ 12.754780] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input20
[ 12.768527] media: Linux media interface: v0.10
[ 12.807058] Linux video capture interface: v2.00
[ 12.895935] Adding 6963380k swap on /dev/sda4. Priority:-1 extents:1 across:6963380k FS
[ 13.017719] uvcvideo: Found UVC 1.00 device CNF7047 (04f2:b091)
[ 13.035125] input: CNF7047 as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input21
[ 13.035301] usbcore: registered new interface driver uvcvideo
[ 13.035306] USB Video Class driver (1.1.1)
[ 13.045065] nvidia: module license 'NVIDIA' taints kernel.
[ 13.045074] Disabling lock debugging due to kernel taint
[ 13.072103] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 19
[ 13.072169] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.073315] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
[ 13.073332] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
[ 24.341403] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[ 24.342425] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[ 24.342699] forcedeth 0000:00:0a.0 enp0s10: no link during initialization
[ 24.343086] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[ 24.348552] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 24.359195] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 25.222102] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 49.081135] wlp7s0: authenticate with 00:1f:33:49:43:73
[ 49.091159] wlp7s0: send auth to 00:1f:33:49:43:73 (try 1/3)
[ 49.094497] wlp7s0: authenticated
[ 49.096844] wlp7s0: associate with 00:1f:33:49:43:73 (try 1/3)
[ 49.099214] wlp7s0: RX AssocResp from 00:1f:33:49:43:73 (capab=0x411 status=0 aid=2)
[ 49.099318] wlp7s0: associated
[ 49.099360] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 49.562283] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.Last edited by Eramthin (2016-01-09 23:02:41)
Offline
#3 2016-01-09 19:13:24
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,424
- Website
Re: ^@ characters inserted in console
Please edit your post and use code tags: https://wiki.archlinux.org/index.php/Fo … s_and_code
Then, again using code tags, paste your shell intialisation files (.bash_profile or .profile and .bashrc, presumably).
Offline
#4 2016-01-09 23:13:24
- Eramthin
- Member
- From: Ohio
- Registered: 2016-01-09
- Posts: 5
Re: ^@ characters inserted in console
Sorry about that. This is my first time using these forums. Anyway I fail to see why local files would effect the system login prompt as they won't be read until after you've already logged in. My /etc/issue file is customized but I was having this issue (no pun intended lol) before customizing it when it was completely blank. I'll go ahead and post those files anyway just in case.
.bash_profile
#
# ~/.bash_profile
#
[[ -f ~/.bashrc ]] && . ~/.bashrc
startx.bashrc
#
# ~/.bashrc
#
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
# User specific environment and startup programs
export PATH=$PATH:$HOME/Apps/binLast edited by Eramthin (2016-01-09 23:15:04)
Offline
#5 2016-01-09 23:22:34
- Eramthin
- Member
- From: Ohio
- Registered: 2016-01-09
- Posts: 5
Re: ^@ characters inserted in console
I have a feeling that something in /dev is inserting an escape character into the keyboard input somehow. I've seen stuff like that happen before on Ubuntu with huge lines of random characters, but this issue is far less severe. I'm not sure what else could possibly be happening besides maybe a kernel glitch or something. Unfortunately I have no idea how to fix any of those problems even if I did figure out what was wrong. I guess maybe I should just be less ocd about the whole thing and deal with it, because it's really only a minor annoyance and everything else on my system is working fine.
Offline
#6 2016-01-10 00:05:17
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,424
- Website
Re: ^@ characters inserted in console
What sort of keyboard do you use? Can you swap it out for another to test it isn't a jammed key (Control)?
Offline
#7 2016-01-10 00:26:02
- Eramthin
- Member
- From: Ohio
- Registered: 2016-01-09
- Posts: 5
Re: ^@ characters inserted in console
I'm using the built in keyboard. The laptop in question is an older HP G60. Pressing Ctrl on the tty screens doesn't do anything either.
Offline
Pages: 1