You are not logged in.
- Topics: Active | Unanswered
#1 2016-01-21 16:46:57
- folkdanskung
- Member
- Registered: 2015-07-16
- Posts: 13
[SOLVED] Trackball-driven cursor dies
After a motherboard failure I've replaced most of the hardware in my mediaserver and "successfully" reinstalled Arch into it, I've got everything working except for the cursor. After the system has booted and you've reached the login screen the cursor works for a few seconds, sometimes I even manage to login with it still working after logon. If I unplug and reattach the wireless receiver the cursor works again for a few seconds. Can be reproduced.
The device (keyboard with trackball) works flawless on Windows 10 (and did work on Arch before motherboard failure). Attaching a regular optic mouse enables you to move the cursor for an indefinate amount of time (it doesn't fail after a few seconds). It is not related to Gnome as I've tried SDDM as well (and it behaves the same).
I've tried both libinput and evdev. No difference, same behavior. What I believe: Between last update and this reinstall, something has changed in the trackball driver or a new driver has taken precedence. Don't know how it was configured before, since there weren't any issues back then.
Any help here is greatly appreciated as I'm completely stuck. I've probably turned the entire Internet upside down looking for similiar issues with a solution that works for me, but to no avail.
Best regards,
folke
Here's evemu output (if necessary):
[root@ent media]# evemu-describe
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Sleep Button
/dev/input/event2: Power Button
/dev/input/event3: PC Speaker
/dev/input/event4: Qsenn 2.4 GHz RF Receiver
/dev/input/event5: Qsenn 2.4 GHz RF Receiver
/dev/input/event6: HDA NVidia HDMI/DP,pcm=3
/dev/input/event7: HDA NVidia HDMI/DP,pcm=7
/dev/input/event8: HDA NVidia HDMI/DP,pcm=8
/dev/input/event9: HDA NVidia HDMI/DP,pcm=9
Select the device event number [0-9]: 4
# EVEMU 1.3
# Kernel: 4.3.3-3-ARCH
# DMI: dmi:bvnAmericanMegatrendsInc.:bvrV11.4:bd09/19/2014:svnMSI:pnMS-7821:pvr2.0:rvnMSI:rnZ97-S02(MS-7821):rvr2.0:cvnMSI:ct3:cvr2.0:
# Input device name: "Qsenn 2.4 GHz RF Receiver"
# Input device ID: bus 0x03 vendor 0x40 product 0x73d version 0x110
# Supported events:
# Event type 0 (EV_SYN)
# Event code 0 (SYN_REPORT)
# Event code 1 (SYN_CONFIG)
# Event code 2 (SYN_MT_REPORT)
# Event code 3 (SYN_DROPPED)
# Event code 4 ((null))
# Event code 5 ((null))
# Event code 6 ((null))
# Event code 7 ((null))
# Event code 8 ((null))
# Event code 9 ((null))
# Event code 10 ((null))
# Event code 11 ((null))
# Event code 12 ((null))
# Event code 13 ((null))
# Event code 14 ((null))
# Event type 1 (EV_KEY)
# Event code 1 (KEY_ESC)
# Event code 2 (KEY_1)
# Event code 3 (KEY_2)
# Event code 4 (KEY_3)
# Event code 5 (KEY_4)
# Event code 6 (KEY_5)
# Event code 7 (KEY_6)
# Event code 8 (KEY_7)
# Event code 9 (KEY_8)
# Event code 10 (KEY_9)
# Event code 11 (KEY_0)
# Event code 12 (KEY_MINUS)
# Event code 13 (KEY_EQUAL)
# Event code 14 (KEY_BACKSPACE)
# Event code 15 (KEY_TAB)
# Event code 16 (KEY_Q)
# Event code 17 (KEY_W)
# Event code 18 (KEY_E)
# Event code 19 (KEY_R)
# Event code 20 (KEY_T)
# Event code 21 (KEY_Y)
# Event code 22 (KEY_U)
# Event code 23 (KEY_I)
# Event code 24 (KEY_O)
# Event code 25 (KEY_P)
# Event code 26 (KEY_LEFTBRACE)
# Event code 27 (KEY_RIGHTBRACE)
# Event code 28 (KEY_ENTER)
# Event code 29 (KEY_LEFTCTRL)
# Event code 30 (KEY_A)
# Event code 31 (KEY_S)
# Event code 32 (KEY_D)
# Event code 33 (KEY_F)
# Event code 34 (KEY_G)
# Event code 35 (KEY_H)
# Event code 36 (KEY_J)
# Event code 37 (KEY_K)
# Event code 38 (KEY_L)
# Event code 39 (KEY_SEMICOLON)
# Event code 40 (KEY_APOSTROPHE)
# Event code 41 (KEY_GRAVE)
# Event code 42 (KEY_LEFTSHIFT)
# Event code 43 (KEY_BACKSLASH)
# Event code 44 (KEY_Z)
# Event code 45 (KEY_X)
# Event code 46 (KEY_C)
# Event code 47 (KEY_V)
# Event code 48 (KEY_B)
# Event code 49 (KEY_N)
# Event code 50 (KEY_M)
# Event code 51 (KEY_COMMA)
# Event code 52 (KEY_DOT)
# Event code 53 (KEY_SLASH)
# Event code 54 (KEY_RIGHTSHIFT)
# Event code 55 (KEY_KPASTERISK)
# Event code 56 (KEY_LEFTALT)
# Event code 57 (KEY_SPACE)
# Event code 58 (KEY_CAPSLOCK)
# Event code 59 (KEY_F1)
# Event code 60 (KEY_F2)
# Event code 61 (KEY_F3)
# Event code 62 (KEY_F4)
# Event code 63 (KEY_F5)
# Event code 64 (KEY_F6)
# Event code 65 (KEY_F7)
# Event code 66 (KEY_F8)
# Event code 67 (KEY_F9)
# Event code 68 (KEY_F10)
# Event code 69 (KEY_NUMLOCK)
# Event code 70 (KEY_SCROLLLOCK)
# Event code 71 (KEY_KP7)
# Event code 72 (KEY_KP8)
# Event code 73 (KEY_KP9)
# Event code 74 (KEY_KPMINUS)
# Event code 75 (KEY_KP4)
# Event code 76 (KEY_KP5)
# Event code 77 (KEY_KP6)
# Event code 78 (KEY_KPPLUS)
# Event code 79 (KEY_KP1)
# Event code 80 (KEY_KP2)
# Event code 81 (KEY_KP3)
# Event code 82 (KEY_KP0)
# Event code 83 (KEY_KPDOT)
# Event code 85 (KEY_ZENKAKUHANKAKU)
# Event code 86 (KEY_102ND)
# Event code 87 (KEY_F11)
# Event code 88 (KEY_F12)
# Event code 89 (KEY_RO)
# Event code 90 (KEY_KATAKANA)
# Event code 91 (KEY_HIRAGANA)
# Event code 92 (KEY_HENKAN)
# Event code 93 (KEY_KATAKANAHIRAGANA)
# Event code 94 (KEY_MUHENKAN)
# Event code 95 (KEY_KPJPCOMMA)
# Event code 96 (KEY_KPENTER)
# Event code 97 (KEY_RIGHTCTRL)
# Event code 98 (KEY_KPSLASH)
# Event code 99 (KEY_SYSRQ)
# Event code 100 (KEY_RIGHTALT)
# Event code 102 (KEY_HOME)
# Event code 103 (KEY_UP)
# Event code 104 (KEY_PAGEUP)
# Event code 105 (KEY_LEFT)
# Event code 106 (KEY_RIGHT)
# Event code 107 (KEY_END)
# Event code 108 (KEY_DOWN)
# Event code 109 (KEY_PAGEDOWN)
# Event code 110 (KEY_INSERT)
# Event code 111 (KEY_DELETE)
# Event code 113 (KEY_MUTE)
# Event code 114 (KEY_VOLUMEDOWN)
# Event code 115 (KEY_VOLUMEUP)
# Event code 116 (KEY_POWER)
# Event code 117 (KEY_KPEQUAL)
# Event code 119 (KEY_PAUSE)
# Event code 121 (KEY_KPCOMMA)
# Event code 122 (KEY_HANGEUL)
# Event code 123 (KEY_HANJA)
# Event code 124 (KEY_YEN)
# Event code 125 (KEY_LEFTMETA)
# Event code 126 (KEY_RIGHTMETA)
# Event code 127 (KEY_COMPOSE)
# Event code 128 (KEY_STOP)
# Event code 129 (KEY_AGAIN)
# Event code 130 (KEY_PROPS)
# Event code 131 (KEY_UNDO)
# Event code 132 (KEY_FRONT)
# Event code 133 (KEY_COPY)
# Event code 134 (KEY_OPEN)
# Event code 135 (KEY_PASTE)
# Event code 136 (KEY_FIND)
# Event code 137 (KEY_CUT)
# Event code 138 (KEY_HELP)
# Event code 140 (KEY_CALC)
# Event code 142 (KEY_SLEEP)
# Event code 150 (KEY_WWW)
# Event code 152 (KEY_COFFEE)
# Event code 158 (KEY_BACK)
# Event code 159 (KEY_FORWARD)
# Event code 161 (KEY_EJECTCD)
# Event code 163 (KEY_NEXTSONG)
# Event code 164 (KEY_PLAYPAUSE)
# Event code 165 (KEY_PREVIOUSSONG)
# Event code 166 (KEY_STOPCD)
# Event code 173 (KEY_REFRESH)
# Event code 176 (KEY_EDIT)
# Event code 177 (KEY_SCROLLUP)
# Event code 178 (KEY_SCROLLDOWN)
# Event code 179 (KEY_KPLEFTPAREN)
# Event code 180 (KEY_KPRIGHTPAREN)
# Event code 183 (KEY_F13)
# Event code 184 (KEY_F14)
# Event code 185 (KEY_F15)
# Event code 186 (KEY_F16)
# Event code 187 (KEY_F17)
# Event code 188 (KEY_F18)
# Event code 189 (KEY_F19)
# Event code 190 (KEY_F20)
# Event code 191 (KEY_F21)
# Event code 192 (KEY_F22)
# Event code 193 (KEY_F23)
# Event code 194 (KEY_F24)
# Event code 240 (KEY_UNKNOWN)
# Event type 4 (EV_MSC)
# Event code 4 (MSC_SCAN)
# Event type 17 (EV_LED)
# Event code 0 (LED_NUML)
# State 0
# Event code 1 (LED_CAPSL)
# State 0
# Event code 2 (LED_SCROLLL)
# State 0
# Event code 3 (LED_COMPOSE)
# State 0
# Event code 4 (LED_KANA)
# State 0
# Event type 20 (EV_REP)
# Event code 0 (REP_DELAY)
# Properties:
N: Qsenn 2.4 GHz RF Receiver
I: 0003 0040 073d 0110
P: 00 00 00 00 00 00 00 00
B: 00 0b 00 00 00 00 00 00 00
B: 01 fe ff ff ff ff ff ff ff
B: 01 ff ff ef ff df ff be fe
B: 01 ff 57 40 c1 7a 20 9f ff
B: 01 07 00 00 00 00 00 01 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 01 00 00 00 00 00 00 00 00
B: 02 00 00 00 00 00 00 00 00
B: 03 00 00 00 00 00 00 00 00
B: 04 10 00 00 00 00 00 00 00
B: 05 00 00 00 00 00 00 00 00
B: 11 1f 00 00 00 00 00 00 00
B: 12 00 00 00 00 00 00 00 00
B: 14 01 00 00 00 00 00 00 00
B: 15 00 00 00 00 00 00 00 00
B: 15 00 00 00 00 00 00 00 00lspci:
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:01.2 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x4 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.3 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 4 (rev d0)
00:1c.7 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 8 (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
02:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]lsmod | grep usb and grep mouse:
usbhid 45056 0
hid 114688 2 hid_generic,usbhid
usbcore 196608 5 ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
usb_common 16384 1 usbcore
mousedev 20480 0
psmouse 118784 0
libps2 16384 2 atkbd,psmouse
serio 20480 6 serio_raw,atkbd,i8042,psmouse/usr/share/X11/xorg.conf.d/90-libinput.conf
I commented out touchpad and touchscreen, just in case it would interfere, even though unlikely. Had no effect.
# Match on all types of devices but tablet devices and joysticks
Section "InputClass"
Identifier "libinput pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection
Section "InputClass"
Identifier "libinput keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection
#Section "InputClass"
# Identifier "libinput touchpad catchall"
# MatchIsTouchpad "on"
# MatchDevicePath "/dev/input/event*"
# Driver "libinput"
#EndSection
#Section "InputClass"
# Identifier "libinput touchscreen catchall"
# MatchIsTouchscreen "on"
# MatchDevicePath "/dev/input/event*"
# Driver "libinput"
#EndSectionLast edited by folkdanskung (2016-01-22 17:08:57)
Offline
#2 2016-01-21 16:58:20
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,719
Re: [SOLVED] Trackball-driven cursor dies
Check (or post) your Xorg log file.
Are there any messages in journal that give a clue?
Is this a USB device? What is the output of lsusb with the device attached? Does that list change when the device is working versus when it is not?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
#3 2016-01-21 20:13:28
- folkdanskung
- Member
- Registered: 2015-07-16
- Posts: 13
Re: [SOLVED] Trackball-driven cursor dies
Thank you for your expedient answer ewaller!
Check (or post) your Xorg log file.
Here's Xorg.0.log:
[ 126.364] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 126.364] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 126.365]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 126.365] X Protocol Version 11, Revision 0
[ 126.365] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 126.365] Current Operating System: Linux ent 4.3.3-3-ARCH #1 SMP PREEMPT Wed Jan 20 08:12:23 CET 2016 x86_64
[ 126.365] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=a6be686b-d301-4093-8593-3c5a3f8785bf rw
[ 126.365] Build Date: 08 January 2016 05:56:16PM
[ 126.365]
[ 126.365] Current version of pixman: 0.32.8
[ 126.365] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 126.365] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 126.365] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 21 20:03:59 2016
[ 126.365] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 126.365] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 126.365] (==) No Layout section. Using the first Screen section.
[ 126.365] (==) No screen section available. Using defaults.
[ 126.365] (**) |-->Screen "Default Screen Section" (0)
[ 126.365] (**) | |-->Monitor "<default monitor>"
[ 126.365] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 126.365] (==) Automatically adding devices
[ 126.365] (==) Automatically enabling devices
[ 126.365] (==) Automatically adding GPU devices
[ 126.365] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 126.365] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 126.365] Entry deleted from font path.
[ 126.365] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 126.365] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 126.365] Entry deleted from font path.
[ 126.365] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 126.365] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 126.365] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 126.365] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 126.365] (II) Loader magic: 0x819d40
[ 126.365] (II) Module ABI versions:
[ 126.365] X.Org ANSI C Emulation: 0.4
[ 126.365] X.Org Video Driver: 20.0
[ 126.365] X.Org XInput driver : 22.1
[ 126.365] X.Org Server Extension : 9.0
[ 126.365] (++) using VT number 2
[ 126.367] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 126.367] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 126.367] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 126.368] (--) PCI:*(0:1:0:0) 10de:1187:1462:2847 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 126.368] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 126.368] (II) LoadModule: "glx"
[ 126.368] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 126.370] (II) Module glx: vendor="NVIDIA Corporation"
[ 126.370] compiled for 4.0.2, module version = 1.0.0
[ 126.370] Module class: X.Org Server Extension
[ 126.370] (II) NVIDIA GLX Module 358.16 Mon Nov 16 18:54:01 PST 2015
[ 126.370] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 126.370] loading driver: nvidia
[ 126.370] (==) Matched nvidia as autoconfigured driver 0
[ 126.370] (==) Matched nouveau as autoconfigured driver 1
[ 126.370] (==) Matched nv as autoconfigured driver 2
[ 126.370] (==) Matched nouveau as autoconfigured driver 3
[ 126.370] (==) Matched nv as autoconfigured driver 4
[ 126.370] (==) Matched modesetting as autoconfigured driver 5
[ 126.370] (==) Matched fbdev as autoconfigured driver 6
[ 126.370] (==) Matched vesa as autoconfigured driver 7
[ 126.370] (==) Assigned the driver to the xf86ConfigLayout
[ 126.370] (II) LoadModule: "nvidia"
[ 126.370] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 126.370] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 126.370] compiled for 4.0.2, module version = 1.0.0
[ 126.370] Module class: X.Org Video Driver
[ 126.370] (II) LoadModule: "nouveau"
[ 126.371] (WW) Warning, couldn't open module nouveau
[ 126.371] (II) UnloadModule: "nouveau"
[ 126.371] (II) Unloading nouveau
[ 126.371] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 126.371] (II) LoadModule: "nv"
[ 126.371] (WW) Warning, couldn't open module nv
[ 126.371] (II) UnloadModule: "nv"
[ 126.371] (II) Unloading nv
[ 126.371] (EE) Failed to load module "nv" (module does not exist, 0)
[ 126.371] (II) LoadModule: "modesetting"
[ 126.371] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 126.371] (II) Module modesetting: vendor="X.Org Foundation"
[ 126.371] compiled for 1.18.0, module version = 1.18.0
[ 126.371] Module class: X.Org Video Driver
[ 126.371] ABI class: X.Org Video Driver, version 20.0
[ 126.371] (II) LoadModule: "fbdev"
[ 126.371] (WW) Warning, couldn't open module fbdev
[ 126.371] (II) UnloadModule: "fbdev"
[ 126.371] (II) Unloading fbdev
[ 126.371] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 126.371] (II) LoadModule: "vesa"
[ 126.371] (WW) Warning, couldn't open module vesa
[ 126.371] (II) UnloadModule: "vesa"
[ 126.371] (II) Unloading vesa
[ 126.371] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 126.371] (II) NVIDIA dlloader X Driver 358.16 Mon Nov 16 18:32:40 PST 2015
[ 126.371] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 126.371] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 126.371] (II) Loading sub module "fb"
[ 126.371] (II) LoadModule: "fb"
[ 126.371] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 126.371] (II) Module fb: vendor="X.Org Foundation"
[ 126.371] compiled for 1.18.0, module version = 1.0.0
[ 126.371] ABI class: X.Org ANSI C Emulation, version 0.4
[ 126.371] (II) Loading sub module "wfb"
[ 126.371] (II) LoadModule: "wfb"
[ 126.371] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 126.371] (II) Module wfb: vendor="X.Org Foundation"
[ 126.371] compiled for 1.18.0, module version = 1.0.0
[ 126.371] ABI class: X.Org ANSI C Emulation, version 0.4
[ 126.371] (II) Loading sub module "ramdac"
[ 126.371] (II) LoadModule: "ramdac"
[ 126.371] (II) Module "ramdac" already built-in
[ 126.372] (WW) Falling back to old probe method for modesetting
[ 126.372] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 126.372] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 126.372] (==) NVIDIA(0): RGB weight 888
[ 126.372] (==) NVIDIA(0): Default visual is TrueColor
[ 126.372] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 126.372] (**) NVIDIA(0): Enabling 2D acceleration
[ 126.373] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 126.373] (--) NVIDIA(0): CRT-0
[ 126.373] (--) NVIDIA(0): DFP-0
[ 126.373] (--) NVIDIA(0): DFP-1 (boot)
[ 126.373] (--) NVIDIA(0): DFP-2
[ 126.373] (--) NVIDIA(0): DFP-3
[ 126.373] (--) NVIDIA(0): DFP-4
[ 126.375] (--) NVIDIA(0): CRT-0: disconnected
[ 126.375] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 126.375] (--) NVIDIA(0):
[ 126.378] (--) NVIDIA(0): DFP-0: disconnected
[ 126.378] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 126.378] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 126.378] (--) NVIDIA(0):
[ 126.391] (--) NVIDIA(0): SONY TV (DFP-1): connected
[ 126.392] (--) NVIDIA(0): SONY TV (DFP-1): Internal TMDS
[ 126.392] (--) NVIDIA(0): SONY TV (DFP-1): 340.0 MHz maximum pixel clock
[ 126.392] (--) NVIDIA(0):
[ 126.392] (--) NVIDIA(0): DFP-2: disconnected
[ 126.392] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 126.392] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 126.392] (--) NVIDIA(0):
[ 126.392] (--) NVIDIA(0): DFP-3: disconnected
[ 126.392] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 126.392] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 126.392] (--) NVIDIA(0):
[ 126.392] (--) NVIDIA(0): DFP-4: disconnected
[ 126.392] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 126.392] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 126.392] (--) NVIDIA(0):
[ 126.392] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 126.393] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 760 (GK104) at PCI:1:0:0 (GPU-0)
[ 126.393] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 126.393] (--) NVIDIA(0): VideoBIOS: 80.04.ea.00.12
[ 126.393] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 126.393] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 126.393] (**) NVIDIA(0): device SONY TV (DFP-1) (Using EDID frequencies has been
[ 126.393] (**) NVIDIA(0): enabled on all display devices.)
[ 126.395] (==) NVIDIA(0):
[ 126.395] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 126.395] (==) NVIDIA(0): will be used as the requested mode.
[ 126.395] (==) NVIDIA(0):
[ 126.396] (II) NVIDIA(0): Validated MetaModes:
[ 126.396] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 126.396] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 126.400] (WW) NVIDIA(0): No valid modes for "HDMI-0:2x576"; removing.
[ 126.401] (WW) NVIDIA(0): No valid modes for "HDMI-0:2x576_50i"; removing.
[ 126.401] (WW) NVIDIA(0): No valid modes for "HDMI-0:2x480"; removing.
[ 126.401] (WW) NVIDIA(0): No valid modes for "HDMI-0:2x480_60i"; removing.
[ 126.402] (--) NVIDIA(0): DPI set to (39, 40); computed from "UseEdidDpi" X config
[ 126.402] (--) NVIDIA(0): option
[ 126.402] (II) UnloadModule: "modesetting"
[ 126.402] (II) Unloading modesetting
[ 126.402] (--) Depth 24 pixmap format is 32 bpp
[ 126.406] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 126.406] (II) NVIDIA: access.
[ 126.408] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 126.408] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 126.408] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 126.408] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 126.408] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 126.408] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 126.408] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 126.408] (II) NVIDIA(0): Config Options in the README.
[ 126.426] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 126.484] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 126.484] (==) NVIDIA(0): Backing store enabled
[ 126.484] (==) NVIDIA(0): Silken mouse enabled
[ 126.484] (==) NVIDIA(0): DPMS enabled
[ 126.484] (II) Loading sub module "dri2"
[ 126.484] (II) LoadModule: "dri2"
[ 126.484] (II) Module "dri2" already built-in
[ 126.484] (II) NVIDIA(0): [DRI2] Setup complete
[ 126.484] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 126.484] (--) RandR disabled
[ 126.486] (II) Initializing extension GLX
[ 126.486] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 126.513] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 126.513] (**) Power Button: Applying InputClass "system-keyboard"
[ 126.513] (II) LoadModule: "evdev"
[ 126.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 126.514] (II) Module evdev: vendor="X.Org Foundation"
[ 126.514] compiled for 1.18.0, module version = 2.10.1
[ 126.514] Module class: X.Org XInput Driver
[ 126.514] ABI class: X.Org XInput driver, version 22.1
[ 126.514] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[ 126.514] (II) Using input driver 'evdev' for 'Power Button'
[ 126.514] (**) Power Button: always reports core events
[ 126.514] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 126.514] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 126.514] (--) evdev: Power Button: Found keys
[ 126.514] (II) evdev: Power Button: Configuring as keyboard
[ 126.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"
[ 126.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 126.514] (**) Option "xkb_rules" "evdev"
[ 126.514] (**) Option "xkb_layout" "se,us"
[ 126.514] (**) Option "xkb_variant" ","
[ 126.524] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 126.524] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 126.524] (**) Power Button: Applying InputClass "system-keyboard"
[ 126.525] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 126.525] (II) Using input driver 'evdev' for 'Power Button'
[ 126.525] (**) Power Button: always reports core events
[ 126.525] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 126.525] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 126.525] (--) evdev: Power Button: Found keys
[ 126.525] (II) evdev: Power Button: Configuring as keyboard
[ 126.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 126.525] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 126.525] (**) Option "xkb_rules" "evdev"
[ 126.525] (**) Option "xkb_layout" "se,us"
[ 126.525] (**) Option "xkb_variant" ","
[ 126.525] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 126.525] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 126.525] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 126.525] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 126.526] (II) Using input driver 'evdev' for 'Sleep Button'
[ 126.526] (**) Sleep Button: always reports core events
[ 126.526] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 126.526] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 126.526] (--) evdev: Sleep Button: Found keys
[ 126.526] (II) evdev: Sleep Button: Configuring as keyboard
[ 126.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event1"
[ 126.526] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 126.526] (**) Option "xkb_rules" "evdev"
[ 126.526] (**) Option "xkb_layout" "se,us"
[ 126.526] (**) Option "xkb_variant" ","
[ 126.526] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[ 126.526] (II) No input driver specified, ignoring this device.
[ 126.526] (II) This device may have been added with another device file.
[ 126.526] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[ 126.526] (II) No input driver specified, ignoring this device.
[ 126.526] (II) This device may have been added with another device file.
[ 126.526] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[ 126.526] (II) No input driver specified, ignoring this device.
[ 126.526] (II) This device may have been added with another device file.
[ 126.526] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[ 126.526] (II) No input driver specified, ignoring this device.
[ 126.526] (II) This device may have been added with another device file.
[ 126.527] (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event4)
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
[ 126.527] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 34 paused 0
[ 126.527] (II) Using input driver 'evdev' for 'Qsenn 2.4 GHz RF Receiver'
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: always reports core events
[ 126.527] (**) evdev: Qsenn 2.4 GHz RF Receiver: Device: "/dev/input/event4"
[ 126.527] (--) evdev: Qsenn 2.4 GHz RF Receiver: Vendor 0x40 Product 0x73d
[ 126.527] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found keys
[ 126.527] (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as keyboard
[ 126.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.0/0003:0040:073D.0004/input/input14/event4"
[ 126.527] (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 9)
[ 126.527] (**) Option "xkb_rules" "evdev"
[ 126.527] (**) Option "xkb_layout" "se,us"
[ 126.527] (**) Option "xkb_variant" ","
[ 126.527] (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event5)
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev pointer catchall"
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 126.527] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
[ 126.528] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 35 paused 0
[ 126.528] (II) Using input driver 'evdev' for 'Qsenn 2.4 GHz RF Receiver'
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: always reports core events
[ 126.528] (**) evdev: Qsenn 2.4 GHz RF Receiver: Device: "/dev/input/event5"
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Vendor 0x40 Product 0x73d
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found 3 mouse buttons
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found scroll wheel(s)
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found relative axes
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found x and y relative axes
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found absolute axes
[ 126.528] (II) evdev: Qsenn 2.4 GHz RF Receiver: Forcing absolute x/y axes to exist.
[ 126.528] (--) evdev: Qsenn 2.4 GHz RF Receiver: Found keys
[ 126.528] (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as mouse
[ 126.528] (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as keyboard
[ 126.528] (II) evdev: Qsenn 2.4 GHz RF Receiver: Adding scrollwheel support
[ 126.528] (**) evdev: Qsenn 2.4 GHz RF Receiver: YAxisMapping: buttons 4 and 5
[ 126.528] (**) evdev: Qsenn 2.4 GHz RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 126.528] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.1/0003:0040:073D.0005/input/input15/event5"
[ 126.528] (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 10)
[ 126.528] (**) Option "xkb_rules" "evdev"
[ 126.528] (**) Option "xkb_layout" "se,us"
[ 126.528] (**) Option "xkb_variant" ","
[ 126.528] (II) evdev: Qsenn 2.4 GHz RF Receiver: initialized for relative axes.
[ 126.528] (WW) evdev: Qsenn 2.4 GHz RF Receiver: ignoring absolute axes.
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: (accel) keeping acceleration scheme 1
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration profile 0
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration factor: 2.000
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration threshold: 4
[ 126.528] (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/mouse0)
[ 126.528] (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
[ 126.528] (II) No input driver specified, ignoring this device.
[ 126.528] (II) This device may have been added with another device file.
[ 126.529] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event6)
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 126.529] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 36 paused 0
[ 126.529] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 126.529] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
[ 126.529] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01d
[ 126.529] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 126.529] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 126.529] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 126.529] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 126.529] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 126.529] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 126.529] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 126.529] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 126.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.3/3-10.1.3:1.0/0003:046D:C01D.0003/input/input9/event6"
[ 126.529] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 11)
[ 126.529] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 126.529] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 126.529] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
[ 126.529] (II) No input driver specified, ignoring this device.
[ 126.529] (II) This device may have been added with another device file.
[ 126.529] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 126.529] (II) No input driver specified, ignoring this device.
[ 126.529] (II) This device may have been added with another device file.Are there any messages in journal that give a clue?
When using driver libinput:
Jan 21 19:56:13 ent kernel: input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/0003:0040:073D.0001/input/input2
Jan 21 19:56:13 ent kernel: usb 1-10.1.3: new low-speed USB device number 5 using xhci_hcd
Jan 21 19:56:13 ent kernel: hid-generic 0003:0040:073D.0001: input,hidraw0: USB HID v1.10 Keyboard [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input0
Jan 21 19:56:13 ent kernel: input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.1/0003:0040:073D.0002/input/input3
Jan 21 19:56:13 ent kernel: hid-generic 0003:0040:073D.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input1
Jan 21 19:56:13 ent kernel: usb 1-10.1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Jan 21 19:56:13 ent kernel: input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.3/1-10.1.3:1.0/0003:046D:C01D.0003/input/input4
Jan 21 19:56:13 ent kernel: hid-generic 0003:046D:C01D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-10.1.3/input0
-------------------------------
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event0)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "libinput keyboard catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 35 paused 0
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) Using input driver 'libinput' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: always reports core events
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "Device" "/dev/input/event0"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "_source" "server/udev"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event0 is tagged by udev as: Keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event0 is a keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.0/0003:0040:073D.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 9)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "xkb_layout" "se,us"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "xkb_variant" ","
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event0 is tagged by udev as: Keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event0 is a keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event1)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "libinput pointer catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "libinput keyboard catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 36 paused 0
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) Using input driver 'libinput' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: always reports core events
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "Device" "/dev/input/event1"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "_source" "server/udev"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is tagged by udev as: Keyboard Mouse
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is a pointer caps
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is a keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) libinput: Qsenn 2.4 GHz RF Receiver: needs a virtual subdevice
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.1/0003:0040:073D.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: MOUSE, id 10)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "AccelerationScheme" "none"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: (accel) selected scheme none/0
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration factor: 2.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration threshold: 4
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is tagged by udev as: Keyboard Mouse
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is a pointer caps
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Qsenn 2.4 GHz RF Receiver', /dev/input/event1 is a keyboard
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/mouse0)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) No input driver specified, ignoring this device.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) This device may have been added with another device file.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 37 paused 0
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Logitech USB-PS/2 Optical Mouse: always reports core events
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "Device" "/dev/input/event2"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "_source" "server/udev"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event2 is a pointer caps
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.3/1-10.1.3:1.0/0003:046D:C01D.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 11)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "AccelerationScheme" "none"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event2 is a pointer caps
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) No input driver specified, ignoring this device.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) This device may have been added with another device file.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) No input driver specified, ignoring this device.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) This device may have been added with another device file.
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "libinput pointer catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "libinput keyboard catchall"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) Using input driver 'libinput' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Qsenn 2.4 GHz RF Receiver: always reports core events
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "Device" "/dev/input/event1"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "_source" "_driver/libinput"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) libinput: Qsenn 2.4 GHz RF Receiver: is a virtual subdevice
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1.1/1-10.1.1:1.1/0003:0040:073D.000
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 12)
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "xkb_layout" "se,us"
Jan 21 19:56:15 ent /usr/lib/gdm/gdm-x-session[492]: (**) Option "xkb_variant" ","When using driver evdev:
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event4)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 33 paused 0
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) Using input driver 'evdev' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: always reports core events
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Qsenn 2.4 GHz RF Receiver: Device: "/dev/input/event4"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Vendor 0x40 Product 0x73d
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found keys
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as keyboard
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.0/0003:0040:073D.000
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 9)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_rules" "evdev"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_layout" "se,us"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_variant" ","
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/event5)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev pointer catchall"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 34 paused 0
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) Using input driver 'evdev' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) Using input driver 'evdev' for 'Qsenn 2.4 GHz RF Receiver'
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: always reports core events
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Qsenn 2.4 GHz RF Receiver: Device: "/dev/input/event5"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Vendor 0x40 Product 0x73d
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found 3 mouse buttons
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found scroll wheel(s)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found relative axes
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found x and y relative axes
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found absolute axes
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Forcing absolute x/y axes to exist.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Qsenn 2.4 GHz RF Receiver: Found keys
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as mouse
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Configuring as keyboard
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Adding scrollwheel support
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Qsenn 2.4 GHz RF Receiver: YAxisMapping: buttons 4 and 5
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Qsenn 2.4 GHz RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.1/0003:0040:073D.000
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) XINPUT: Adding extended input device "Qsenn 2.4 GHz RF Receiver" (type: KEYBOARD, id 10)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_rules" "evdev"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_layout" "se,us"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "xkb_variant" ","
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: initialized for relative axes.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (WW) evdev: Qsenn 2.4 GHz RF Receiver: ignoring absolute axes.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: (accel) keeping acceleration scheme 1
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration profile 0
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration factor: 2.000
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: (accel) acceleration threshold: 4
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device Qsenn 2.4 GHz RF Receiver (/dev/input/mouse0)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Qsenn 2.4 GHz RF Receiver: Applying InputClass "system-keyboard"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) No input driver specified, ignoring this device.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) This device may have been added with another device file.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event6)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 35 paused 0
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: always reports core events
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01d
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.3/3-10.1.3:1.0/0003:046D:C01D.000
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 11)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) No input driver specified, ignoring this device.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) This device may have been added with another device file.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) No input driver specified, ignoring this device.
Jan 21 20:01:57 ent /usr/lib/gdm/gdm-x-session[504]: (II) This device may have been added with another device file.Is this a USB device? What is the output of lsusb with the device attached? Does that list change when the device is working versus when it is not?
Yes, it's an USB device. This is when the trackball keyboard is connected, whether it is working or not.
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse
Bus 003 Device 006: ID 0040:073d
Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubWhen it's not connected, this line:
Bus 003 Device 006: ID 0040:073dis missing. So that's the device.
I know the device description is "Qsenn 2.4 GHz RF Receiver", output of dmesg | grep Qsenn:
[root@ent media]# dmesg | grep Qsenn
[ 1.998487] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.0/0003:0040:073D.0001/input/input7
[ 2.050778] hid-generic 0003:0040:073D.0001: input,hidraw0: USB HID v1.10 Keyboard [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input0
[ 2.050951] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.1/0003:0040:073D.0002/input/input8
[ 2.107615] hid-generic 0003:0040:073D.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input1
[ 70.670553] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.0/0003:0040:073D.0004/input/input14
[ 70.721017] hid-generic 0003:0040:073D.0004: input,hidraw0: USB HID v1.10 Keyboard [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input0
[ 70.737435] input: Qsenn 2.4 GHz RF Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.1/0003:0040:073D.0005/input/input15
[ 70.787944] hid-generic 0003:0040:073D.0005: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Qsenn 2.4 GHz RF Receiver] on usb-0000:00:14.0-10.1.1/input1I believe the two lines that say
Jan 21 20:02:48 ent /usr/lib/gdm/gdm-x-session[504]: (II) evdev: Qsenn 2.4 GHz RF Receiver: Closeare a result of me physically disconnecting the RF-receiver.
As for the lines
[ 126.529] (II) This device may have been added with another device file.I think they may be the result of me forgetting to remove evdev conf after installing libinput drivers. As I found no difference between them I've removed libinput drivers and config.
I actually got the trackball to work more or less consistently. When removing and reattaching the RF-receiver the cursor now stays alive. Though unfortunately only until the next reboot, after which I have to repeat the remove/attach procedure. It's wierd, because this didn't work a while ago, or maybe I was just unlucky and didn't make enough attempts.
Best regards,
folke
Offline
#4 2016-01-22 17:08:31
- folkdanskung
- Member
- Registered: 2015-07-16
- Posts: 13
Re: [SOLVED] Trackball-driven cursor dies
An update.
I've found the culprit. I installed another OS on a spare drive and sadly the problem persisted. So it seems the issue likely lies in the new motherboard.
Thank you for your time, though I'm sorry it was for naught.
Best regards,
folke
Offline