You are not logged in.
the HDMI on my TV stoped working, so I changed to the VGA output, but now my screen is slightly to the left, with a black bar on the right.
if I change to any other resolutions (e.g. `xrandr -display :0.0 --output VGA1 --mode 800x600`) the screen starts at the correct position, but 1920x1080 always start at the wrong position.
http://i.imgur.com/nhVkoE9.jpg
http://i.imgur.com/UdO8KgM.jpg
xrandr -display :0.0 -q --verbose
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x42
Timestamp: 152863213
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
HDMI1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x43
Timestamp: 152863213
Subpixel: unknown
Clones: VGA1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
VGA1 connected 1920x1080+0+0 (0x47) normal (normal left inverted right x axis y axis) 708mm x 398mm
Identifier: 0x44
Timestamp: 152863213
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones: HDMI1
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
[redacted]
1920x1080 (0x47) 138.500MHz +HSync -VSync *current +preferred
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 66.59KHz
v: height 1080 start 1083 end 1088 total 1111 clock 59.93Hz
1600x1200 (0xa1) 162.000MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.00KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.00Hz
1280x1024 (0xa2) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1360x768 (0xa3) 85.500MHz +HSync +VSync
h: width 1360 start 1424 end 1536 total 1792 skew 0 clock 47.71KHz
v: height 768 start 771 end 777 total 795 clock 60.02Hz
1280x768 (0xa4) 79.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 47.78KHz
v: height 768 start 771 end 778 total 798 clock 59.87Hz
1024x768 (0xa5) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0xa6) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0xa7) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0xa8) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0xa9) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0xaa) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 152863213
Subpixel: no subpixels
Clones:
CRTCs: 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Thanks
Mod note: converted imgs to urls -- WorMzy
Last edited by WorMzy (2016-03-02 20:00:07)
Offline
Try using xorg-xvidtune to centre your screen then click on "Show" to display the modeline which can be added to an Xorg configuration file.
What is your video hardware and driver(s)?
Offline
I fixed it, there was a hidden option on my tv to move the screen.
Thanks for the help though
Offline
jonnsl, in the future, please don't embed large images in your posts.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline