You are not logged in.
- Topics: Active | Unanswered
#1 2016-02-10 12:24:31
- jerf
- Member
- Registered: 2009-06-03
- Posts: 33
Can't enable DRI3 on Intel HD Graphics 4400
I have a problem with SDDM Breeze theme described in this thread. The proposed solution is to enable DRI3.
I couldn't, however, manage to enable DRI3. I have a laptop with Intel HD Graphics 4400; fully updated archlinux-x64 (with pf-kernel, but I tried the stock kernel as well and everything is the same).
I followed the instructions on the wiki page. Here is my /etc/X11/xorg.conf.d/20-intel.conf :
$ cat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "DRI" "3"
EndSectionHere is what X11 log says:
$ cat /var/log/Xorg.0.log
[ 14.551]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 14.551] X Protocol Version 11, Revision 0
[ 14.551] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 14.551] Current Operating System: Linux ub 4.4.4-pf #1 SMP PREEMPT Tue Feb 9 20:35:31 CST 2016 x86_64
[ 14.551] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-pf root=UUID=0651cbff-60e8-46df-a861-f89b437824d0 rw quiet pcie_aspm=force i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 acpi_osi=
[ 14.551] Build Date: 08 January 2016 05:56:16PM
[ 14.551]
[ 14.551] Current version of pixman: 0.34.0
[ 14.551] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.551] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.551] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 10 13:58:56 2016
[ 14.551] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.551] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.551] (==) No Layout section. Using the first Screen section.
[ 14.551] (==) No screen section available. Using defaults.
[ 14.551] (**) |-->Screen "Default Screen Section" (0)
[ 14.551] (**) | |-->Monitor "<default monitor>"
[ 14.551] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 14.551] (**) | |-->Device "card0"
[ 14.551] (**) | |-->GPUDevice "Intel Graphics"
[ 14.551] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.551] (==) Automatically adding devices
[ 14.551] (==) Automatically enabling devices
[ 14.551] (==) Automatically adding GPU devices
[ 14.551] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 14.551] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 14.551] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.551] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.551] (II) Loader magic: 0x819d40
[ 14.551] (II) Module ABI versions:
[ 14.551] X.Org ANSI C Emulation: 0.4
[ 14.551] X.Org Video Driver: 20.0
[ 14.551] X.Org XInput driver : 22.1
[ 14.551] X.Org Server Extension : 9.0
[ 14.551] (++) using VT number 1
[ 14.551] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 14.552] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.552] (--) PCI:*(0:0:2:0) 8086:0a16:1043:13bd rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 14.553] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14.553] (II) LoadModule: "glx"
[ 14.553] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.553] (II) Module glx: vendor="X.Org Foundation"
[ 14.553] compiled for 1.18.0, module version = 1.0.0
[ 14.553] ABI class: X.Org Server Extension, version 9.0
[ 14.553] (==) AIGLX enabled
[ 14.553] (II) LoadModule: "intel"
[ 14.553] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.554] (II) Module intel: vendor="X.Org Foundation"
[ 14.554] compiled for 1.18.0, module version = 2.99.917
[ 14.554] Module class: X.Org Video Driver
[ 14.554] ABI class: X.Org Video Driver, version 20.0
[ 14.554] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 14.554] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 14.554] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 14.554] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 14.554] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 14.554] (II) intel(0): SNA compiled from 2.99.917-519-g8229390
[ 14.554] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 14.554] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 14.554] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.554] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 14.554] (==) intel(0): RGB weight 888
[ 14.554] (==) intel(0): Default visual is TrueColor
[ 14.554] (**) intel(0): Option "Backlight" "intel_backlight"
[ 14.554] (II) intel(0): Output eDP1 has no monitor section
[ 14.559] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 14.559] (II) intel(0): Enabled output eDP1
[ 14.559] (II) intel(0): Output DP1 has no monitor section
[ 14.559] (II) intel(0): Enabled output DP1
[ 14.559] (II) intel(0): Output HDMI1 has no monitor section
[ 14.559] (II) intel(0): Enabled output HDMI1
[ 14.559] (II) intel(0): Output HDMI2 has no monitor section
[ 14.559] (II) intel(0): Enabled output HDMI2
[ 14.559] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 14.559] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 14.559] (II) intel(0): Enabled output VIRTUAL1
[ 14.559] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 14.559] (==) intel(0): TearFree disabled
[ 14.559] (==) intel(0): DPI set to (96, 96)
[ 14.559] (II) Loading sub module "dri2"
[ 14.559] (II) LoadModule: "dri2"
[ 14.559] (II) Module "dri2" already built-in
[ 14.559] (II) Loading sub module "present"
[ 14.559] (II) LoadModule: "present"
[ 14.559] (II) Module "present" already built-in
[ 14.559] (==) Depth 24 pixmap format is 32 bpp
[ 14.559] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 14.559] (==) intel(0): Backing store enabled
[ 14.559] (==) intel(0): Silken mouse enabled
[ 14.559] (II) intel(0): HW Cursor enabled
[ 14.559] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.559] (==) intel(0): DPMS enabled
[ 14.559] (==) intel(0): Display hotplug detection enabled
[ 14.559] (II) intel(0): [DRI2] Setup complete
[ 14.559] (II) intel(0): [DRI2] DRI driver: i965
[ 14.559] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 14.559] (II) intel(0): direct rendering: DRI2 enabled
[ 14.559] (II) intel(0): hardware support for Present enabled
[ 14.559] (--) RandR disabled
[ 14.568] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.568] (II) AIGLX: enabled GLX_ARB_create_context
[ 14.568] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 14.568] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 14.568] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.568] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.568] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 14.568] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 14.568] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.568] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 14.568] (II) AIGLX: Loaded and initialized i965
[ 14.568] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.570] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14.571] (II) intel(0): Setting screen physical size to 508 x 285
[ 14.627] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.627] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.627] (II) LoadModule: "evdev"
[ 14.627] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.628] (II) Module evdev: vendor="X.Org Foundation"
[ 14.628] compiled for 1.18.0, module version = 2.10.1
[ 14.628] Module class: X.Org XInput Driver
[ 14.628] ABI class: X.Org XInput driver, version 22.1
[ 14.628] (II) Using input driver 'evdev' for 'Power Button'
[ 14.628] (**) Power Button: always reports core events
[ 14.628] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.628] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.628] (--) evdev: Power Button: Found keys
[ 14.628] (II) evdev: Power Button: Configuring as keyboard
[ 14.628] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 14.628] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.628] (**) Option "xkb_rules" "evdev"
[ 14.628] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 14.628] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.628] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.628] (**) Video Bus: always reports core events
[ 14.628] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 14.628] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 14.628] (--) evdev: Video Bus: Found keys
[ 14.628] (II) evdev: Video Bus: Configuring as keyboard
[ 14.628] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 14.628] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14.628] (**) Option "xkb_rules" "evdev"
[ 14.628] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 14.628] (II) No input driver specified, ignoring this device.
[ 14.628] (II) This device may have been added with another device file.
[ 14.629] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.629] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.629] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.629] (**) Sleep Button: always reports core events
[ 14.629] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 14.629] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 14.629] (--) evdev: Sleep Button: Found keys
[ 14.629] (II) evdev: Sleep Button: Configuring as keyboard
[ 14.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 14.629] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 14.629] (**) Option "xkb_rules" "evdev"
[ 14.629] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 14.629] (II) No input driver specified, ignoring this device.
[ 14.629] (II) This device may have been added with another device file.
[ 14.629] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 14.629] (II) No input driver specified, ignoring this device.
[ 14.629] (II) This device may have been added with another device file.
[ 14.630] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 14.630] (II) No input driver specified, ignoring this device.
[ 14.630] (II) This device may have been added with another device file.
[ 14.630] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 14.630] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 14.630] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 14.630] (**) Logitech USB Receiver: always reports core events
[ 14.630] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 14.681] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 14.681] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 14.681] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 14.681] (--) evdev: Logitech USB Receiver: Found relative axes
[ 14.681] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 14.681] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 14.681] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 14.681] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 14.681] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0001/input/input9/event5"
[ 14.681] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[ 14.681] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 14.681] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 14.681] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 14.681] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 14.681] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 14.681] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 14.681] (II) No input driver specified, ignoring this device.
[ 14.681] (II) This device may have been added with another device file.
[ 14.682] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 14.682] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 14.682] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 14.682] (**) Logitech USB Receiver: always reports core events
[ 14.682] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 14.682] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 14.682] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 14.682] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 14.682] (--) evdev: Logitech USB Receiver: Found relative axes
[ 14.682] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 14.682] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 14.682] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 14.682] (--) evdev: Logitech USB Receiver: Found keys
[ 14.682] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 14.682] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 14.682] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 14.682] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 14.682] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.682] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0002/input/input10/event6"
[ 14.682] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 14.682] (**) Option "xkb_rules" "evdev"
[ 14.682] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 14.682] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 14.682] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 14.682] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 14.682] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 14.682] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 14.682] (II) config/udev: Adding input device HD WebCam (/dev/input/event15)
[ 14.682] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 14.682] (II) Using input driver 'evdev' for 'HD WebCam'
[ 14.682] (**) HD WebCam: always reports core events
[ 14.682] (**) evdev: HD WebCam: Device: "/dev/input/event15"
[ 14.682] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2987
[ 14.682] (--) evdev: HD WebCam: Found keys
[ 14.682] (II) evdev: HD WebCam: Configuring as keyboard
[ 14.682] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22/event15"
[ 14.682] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 11)
[ 14.682] (**) Option "xkb_rules" "evdev"
[ 14.683] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event14)
[ 14.683] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[ 14.683] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer'
[ 14.683] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[ 14.683] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event14"
[ 14.734] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x8a0c
[ 14.734] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes
[ 14.734] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes
[ 14.734] (II) evdev: Atmel Atmel maXTouch Digitizer: No buttons found, faking one.
[ 14.734] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes
[ 14.734] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen
[ 14.734] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen
[ 14.734] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5
[ 14.734] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A0C.0003/input/input21/event14"
[ 14.734] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 12)
[ 14.734] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes.
[ 14.734] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1
[ 14.734] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0
[ 14.734] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[ 14.734] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[ 14.734] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse2)
[ 14.734] (II) No input driver specified, ignoring this device.
[ 14.734] (II) This device may have been added with another device file.
[ 14.734] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 14.734] (II) No input driver specified, ignoring this device.
[ 14.734] (II) This device may have been added with another device file.
[ 14.735] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 14.735] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 14.735] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 14.735] (**) Asus WMI hotkeys: always reports core events
[ 14.735] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[ 14.735] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 14.735] (--) evdev: Asus WMI hotkeys: Found keys
[ 14.735] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 14.735] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event7"
[ 14.735] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 14.735] (**) Option "xkb_rules" "evdev"
[ 14.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 14.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.735] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 14.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 14.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 14.735] (**) Option "xkb_rules" "evdev"
[ 14.736] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event13)
[ 14.736] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.736] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 14.736] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 14.736] (II) LoadModule: "synaptics"
[ 14.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.736] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.736] compiled for 1.18.0, module version = 1.8.3
[ 14.736] Module class: X.Org XInput Driver
[ 14.736] ABI class: X.Org XInput driver, version 22.1
[ 14.736] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 14.736] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 14.736] (**) Option "Device" "/dev/input/event13"
[ 14.760] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2960 (res 32)
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1924 (res 32)
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 14.760] (**) Option "TapButton1" "1"
[ 14.760] (**) Option "TapButton2" "2"
[ 14.760] (**) Option "TapButton3" "3"
[ 14.760] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.760] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 14.760] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 14.772] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input20/event13"
[ 14.772] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 14.772] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.772] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 14.772] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[ 14.772] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 14.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 14.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 14.772] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 14.772] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 14.772] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 14.772] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.772] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 14.772] (II) No input driver specified, ignoring this device.
[ 14.772] (II) This device may have been added with another device file.
[ 16.561] (II) intel(0): EDID vendor "BOE", prod id 1507
[ 16.561] (II) intel(0): Printing DDC gathered Modelines:
[ 16.561] (II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1968 2000 2080 1080 1083 1088 1112 +hsync -vsync (66.7 kHz eP)
[ 16.848] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawableNo mention of DRI3.
Contents of mkinitcpio.conf, just in case:
$ cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915 msr"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base consolefont keymap udev autodetect modconf block mdadm_udev filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""Any ideas on what might be the problem?
Offline
#2 2016-02-12 20:43:42
- paulkerry
- Member
- From: Sheffield, UK
- Registered: 2014-10-02
- Posts: 611
Re: Can't enable DRI3 on Intel HD Graphics 4400
I have Intel HD Graphics 4600, so I tried enabling DRI3 and it works for me.
My /etc/X11/xorg.conf.d/20-intel.conf file is...
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
Option "DRI" "3"
EndSectionand
grep DRI /var/log/Xorg.0.log
[ 15167.334] (**) intel(0): Option "DRI" "3"
[ 15167.335] (II) intel(0): [DRI2] Setup complete
[ 15167.335] (II) intel(0): [DRI2] DRI driver: i965
[ 15167.335] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 15167.335] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 15167.346] (II) GLX: Initialized DRI2 GL provider for screen 0I notice that
man intelunder " Option "DRI" "string" "
says "Default: All levels of DRI are enabled for configurations where it is supported"
so perhaps it's not supported on your GPU?
Offline
#3 2016-02-12 20:47:04
- ugjka
- Member
- From: Latvia
- Registered: 2014-04-01
- Posts: 1,812
- Website
Re: Can't enable DRI3 on Intel HD Graphics 4400
Check ~/.local/share/xorg/Xorg.0.log if you don't run Xorg as root
Last edited by ugjka (2016-02-12 20:52:03)
https://ugjka.net
paru > yay | webcord > discord
pacman -S spotify-launcher
mount /dev/disk/by-...
Offline