You are not logged in.

Pages: 1

#1 2016-02-13 14:22:16

xanb
Member
Registered: 2012-07-24
Posts: 418

[openrc] tty* disappears after a while

I have used openrc without problems but recently when I spend time in X, then CTRL+ALT+F1 or CTRL+ALT+F* gives me a black screen (instead of "Arch Linux [...] tty1"). I can type but I can't see nothing.

I just want to know why my system belongs this way and how can I fix it.

Thanks,

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#2 2016-02-13 14:26:39

Lukeee
Member
From: UK
Registered: 2016-02-13
Posts: 8

Re: [openrc] tty* disappears after a while

Hi,

I know you mentioned tty switching, but if you close down your WM, and drop back to the tty, are you able to see it and type?

Regards,

Luke.

Edit:

Also you say after a while, have to timed how long it takes? or done anything to find out if something is causing it, or if it's just after a certain amount of time.

Last edited by Lukeee (2016-02-13 14:27:41)

Offline

#3 2016-02-14 12:17:11

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

Lukeee wrote:

Hi,

I know you mentioned tty switching, but if you close down your WM, and drop back to the tty, are you able to see it and type?

Regards,

Luke.

Edit:

Also you say after a while, have to timed how long it takes? or done anything to find out if something is causing it, or if it's just after a certain amount of time.


I don't know the amount of time.  Hours. How can I triage the bug and discover which program is in charge of that?
No. If I exit of X, then all is the same: I can't see the tty*

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#4 2016-02-14 12:59:43

Lukeee
Member
From: UK
Registered: 2016-02-13
Posts: 8

Re: [openrc] tty* disappears after a while

xanb wrote:
Lukeee wrote:

Hi,

I know you mentioned tty switching, but if you close down your WM, and drop back to the tty, are you able to see it and type?

Regards,

Luke.

Edit:

Also you say after a while, have to timed how long it takes? or done anything to find out if something is causing it, or if it's just after a certain amount of time.


I don't know the amount of time.  Hours. How can I triage the bug and discover which program is in charge of that?
No. If I exit of X, then all is the same: I can't see the tty*

Does your Login manager and DE/WM loads up successfully on boot? Could you also post your dmesg log too, don't forget the code tags!

This could potentially "lock" you out of your computer if it is a black screen, and you can't do anything, so if you have another computer to use if this does go black, then please do this, if not, don't yet. Disable autostart of your login manager. Just thinking that if you do those then reboot, we will be able to see if you get the tty1 login on successful boot, or if you just get a black screen.

Regards,

Luke.

Offline

#5 2016-02-14 14:55:08

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

Here is my dmesg:

$ dmesg 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.17-1-lts (builduser@andyrtr) (gcc version 5.3.0 (GCC) ) #1 SMP Mon Feb 1 16:35:08 CET 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=ef7df8c4-97a9-45d9-a80e-7a16254034b0 rw quiet rootflags=discard elevator=deadline tpm_tis.interrupts=0
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009e3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007bf79fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bf7a000-0x000000007e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard Falco, BIOS          08/13/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C800000 mask 7FFF800000 uncachable
[    0.000000]   2 base 007D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 write-combining
[    0.000000]   5 base 00FF800000 mask 7FFF800000 uncachable
[    0.000000]   6 base 0100000000 mask 7F00000000 write-back
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0x7bf7a max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7bf79fff]
[    0.000000]  [mem 0x60000000-0x7bdfffff] page 2M
[    0.000000]  [mem 0x7be00000-0x7bf79fff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x00efffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x00dfffff] page 2M
[    0.000000]  [mem 0x00e00000-0x00efffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x01000000-0x3fffffff]
[    0.000000]  [mem 0x01000000-0x3fffffff] page 2M
[    0.000000] RAMDISK: [mem 0x37934000-0x37c91fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FDBB0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007BF840E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007BF88560 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 0x000000007BF84250 004307 (v02 COREv4 COREBOOT 20110725 INTL 20090123)
[    0.000000] ACPI: FACS 0x000000007BF84210 000040
[    0.000000] ACPI: FACS 0x000000007BF84210 000040
[    0.000000] ACPI: HPET 0x000000007BF88660 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007BF886A0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 0x000000007BF88700 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x000000007BF89600 0008A0 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: SSDT 0x000000007BF89EA0 00005C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1005fb000-0x1005fefff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880079800000-ffff88007b9fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001005fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000002ffff]
[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000000efffff]
[    0.000000]   node   0: [mem 0x0000000001000000-0x000000007bf79fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001005fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff]
[    0.000000] On node 0 totalpages: 508935
[    0.000000]   DMA zone: 59 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3725 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7870 pages used for memmap
[    0.000000]   DMA32 zone: 503674 pages, LIFO batch:31
[    0.000000]   Normal zone: 24 pages used for memmap
[    0.000000]   Normal zone: 1536 pages, LIFO batch:0
[    0.000000] Reserving Intel graphics stolen memory at 0x7ca00000-0x7e9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00030000-0x0003ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00f00000-0x00ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf7a000-0x7e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xffffffff]
[    0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880100200000 s95128 r8192 d31848 u1048576
[    0.000000] pcpu-alloc: s95128 r8192 d31848 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500961
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=ef7df8c4-97a9-45d9-a80e-7a16254034b0 rw quiet rootflags=discard elevator=deadline tpm_tis.interrupts=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1919312K/2035740K available (5663K kernel code, 898K rwdata, 1740K rodata, 1188K init, 1152K bss, 116428K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1396.832 MHz processor
[    0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.66 BogoMIPS (lpj=13968320)
[    0.000050] pid_max: default: 32768 minimum: 301
[    0.000058] ACPI: Core revision 20150410
[    0.003950] ACPI: All ACPI Tables successfully acquired
[    0.003981] Security Framework initialized
[    0.003989] Yama: becoming mindful.
[    0.004234] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004867] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005149] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005155] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005409] Initializing cgroup subsys blkio
[    0.005414] Initializing cgroup subsys memory
[    0.005423] Initializing cgroup subsys devices
[    0.005426] Initializing cgroup subsys freezer
[    0.005428] Initializing cgroup subsys net_cls
[    0.005460] CPU: Physical Processor ID: 0
[    0.005462] CPU: Processor Core ID: 0
[    0.006801] mce: CPU supports 7 MCE banks
[    0.006819] CPU0: Thermal monitoring enabled (TM1)
[    0.006830] process: using mwait in idle threads
[    0.006835] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.006836] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.007364] Freeing SMP alternatives memory: 20K (ffffffff81a0b000 - ffffffff81a10000)
[    0.011721] ftrace: allocating 21661 entries in 85 pages
[    0.026374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.126379] TSC deadline timer enabled
[    0.126383] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[    0.126418] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.126449] ... version:                3
[    0.126451] ... bit width:              48
[    0.126452] ... generic registers:      8
[    0.126454] ... value mask:             0000ffffffffffff
[    0.126455] ... max period:             0000ffffffffffff
[    0.126456] ... fixed-purpose events:   3
[    0.126458] ... event mask:             00000007000000ff
[    0.127182] x86: Booting SMP configuration:
[    0.127184] .... node  #0, CPUs:      #1
[    0.141834] x86: Booted up 1 node, 2 CPUs
[    0.141838] smpboot: Total of 2 processors activated (5587.32 BogoMIPS)
[    0.143761] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.143946] devtmpfs: initialized
[    0.148717] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.148823] pinctrl core: initialized pinctrl subsystem
[    0.148876] RTC time: 14:48:18, date: 02/14/16
[    0.149037] NET: Registered protocol family 16
[    0.171855] cpuidle: using governor ladder
[    0.201860] cpuidle: using governor menu
[    0.201915] ACPI: bus type PCI registered
[    0.201918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.202020] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.202023] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.202146] PCI: Using configuration type 1 for base access
[    0.202340] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.202356] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.226828] ACPI: Added _OSI(Module Device)
[    0.226830] ACPI: Added _OSI(Processor Device)
[    0.226832] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.226834] ACPI: Added _OSI(Processor Aggregator Device)
[    0.230222] ACPI : EC: EC started
[    0.230298] ACPI: Interpreter enabled
[    0.230305] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.230311] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.230327] ACPI: (supports S0 S3 S4 S5)
[    0.230329] ACPI: Using IOAPIC for interrupt routing
[    0.230354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.235471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235479] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.235527] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.235600] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[    0.235605] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.235815] PCI host bridge to bus 0000:00
[    0.235818] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.235821] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.235823] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.235826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.235828] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.235830] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.235832] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.235835] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.235837] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.235839] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.235841] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.235843] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.235845] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.235848] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.235850] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.235852] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.235854] pci_bus 0000:00: root bus resource [mem 0x7ea00001-0xfebfffff window]
[    0.235857] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.235867] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.235994] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[    0.236010] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.236020] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.236027] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
[    0.236138] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.236150] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit]
[    0.236286] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.236306] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
[    0.236370] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.236430] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.236484] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102
[    0.236503] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff]
[    0.236515] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff]
[    0.236673] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000
[    0.236691] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff]
[    0.236703] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff]
[    0.236857] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000
[    0.236875] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff]
[    0.236887] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff]
[    0.237052] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.237070] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit]
[    0.237143] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.237195] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.237245] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.237320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237427] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.237447] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff]
[    0.237537] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.237590] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.237641] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[    0.237841] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.237857] pci 0000:00:1f.2: reg 0x10: [io  0x1860-0x1867]
[    0.237866] pci 0000:00:1f.2: reg 0x14: [io  0x1870-0x1873]
[    0.237874] pci 0000:00:1f.2: reg 0x18: [io  0x1868-0x186f]
[    0.237883] pci 0000:00:1f.2: reg 0x1c: [io  0x1874-0x1877]
[    0.237892] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.237901] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff]
[    0.237936] pci 0000:00:1f.2: PME# supported from D3hot
[    0.238026] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.238043] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit]
[    0.238066] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.238178] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[    0.238209] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit]
[    0.238470] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[    0.238521] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
[    0.238719] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.256483] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.256490] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.256626] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.256684] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[    0.256737] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.256789] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[    0.256840] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.256892] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.256942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.256993] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.257590] ACPI : EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[    0.257722] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.257724] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.257729] vgaarb: loaded
[    0.257731] vgaarb: bridge control possible 0000:00:02.0
[    0.257827] PCI: Using ACPI for IRQ routing
[    0.259473] PCI: pci_cache_line_size set to 64 bytes
[    0.259546] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[    0.259548] e820: reserve RAM buffer [mem 0x7bf7a000-0x7bffffff]
[    0.259550] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[    0.259713] NetLabel: Initializing
[    0.259714] NetLabel:  domain hash size = 128
[    0.259716] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.259731] NetLabel:  unlabeled traffic allowed by default
[    0.259767] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.259774] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.261806] Switched to clocksource hpet
[    0.268887] pnp: PnP ACPI init
[    0.269012] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.269016] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.269019] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.269021] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.269024] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.269027] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.269030] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.269032] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.269035] system 00:00: [mem 0x00f00000-0x00ffffff] has been reserved
[    0.269040] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269333] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.269337] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.269412] system 00:02: [io  0x1000-0x10fe] could not be reserved
[    0.269416] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269443] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.269490] system 00:04: [io  0x0900-0x09fe] has been reserved
[    0.269493] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269536] system 00:05: [io  0x0200] has been reserved
[    0.269539] system 00:05: [io  0x0204] has been reserved
[    0.269542] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.269544] system 00:05: [io  0x0880-0x08ff] has been reserved
[    0.269547] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269589] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.269629] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.269674] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.269775] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269896] pnp: PnP ACPI: found 10 devices
[    0.276628] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.276652] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.276660] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.276671] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.276674] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.276677] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.276679] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.276681] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.276683] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.276686] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.276688] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.276690] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.276693] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.276695] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.276697] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.276700] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.276702] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.276704] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.276707] pci_bus 0000:00: resource 19 [mem 0x7ea00001-0xfebfffff window]
[    0.276709] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.276711] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.276755] NET: Registered protocol family 2
[    0.276956] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.277010] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.277077] TCP: Hash tables configured (established 16384 bind 16384)
[    0.277107] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.277118] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.277168] NET: Registered protocol family 1
[    0.277186] pci 0000:00:02.0: Video device with shadowed ROM
[    0.277679] PCI: CLS 64 bytes, default 64
[    0.277736] Unpacking initramfs...
[    0.368952] Freeing initrd memory: 3448K (ffff880037934000 - ffff880037c92000)
[    0.370071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.370077] software IO TLB [mem 0x75800000-0x79800000] (64MB) mapped at [ffff880075800000-ffff8800797fffff]
[    0.370147] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.370149] hw unit of domain pp0-core 2^-14 Joules
[    0.370150] hw unit of domain package 2^-14 Joules
[    0.370152] hw unit of domain dram 2^-14 Joules
[    0.370153] hw unit of domain pp1-gpu 2^-14 Joules
[    0.370212] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:00 [mem 0xfed10000-0xfed13fff]
[    0.370213] ------------[ cut here ]------------
[    0.370218] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:202 __ioremap_caller+0x2c2/0x3b0()
[    0.370220] Info: mapping multiple BARs. Your kernel is fine.
[    0.370222] Modules linked in:

[    0.370227] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.17-1-lts #1
[    0.370228] Hardware name: Hewlett-Packard Falco, BIOS          08/13/2014
[    0.370230]  0000000000000000 0000000052d1756f ffff8801003c7ad8 ffffffff8157ddaa
[    0.370235]  0000000000000000 ffff8801003c7b30 ffff8801003c7b18 ffffffff810760fa
[    0.370238]  ffff8801003c7b48 ffffc900003a0000 00000000fed16000 0000000000006000
[    0.370241] Call Trace:
[    0.370249]  [<ffffffff8157ddaa>] dump_stack+0x45/0x57
[    0.370253]  [<ffffffff810760fa>] warn_slowpath_common+0x8a/0xc0
[    0.370256]  [<ffffffff81076185>] warn_slowpath_fmt+0x55/0x70
[    0.370259]  [<ffffffff81064b22>] __ioremap_caller+0x2c2/0x3b0
[    0.370262]  [<ffffffff81064c27>] ioremap_nocache+0x17/0x20
[    0.370266]  [<ffffffff8103a719>] snb_uncore_imc_init_box+0x79/0xb0
[    0.370270]  [<ffffffff81038915>] uncore_pci_probe+0xd5/0x1e0
[    0.370274]  [<ffffffff813066b5>] local_pci_probe+0x45/0xa0
[    0.370279]  [<ffffffff81251ad1>] ? sysfs_do_create_link_sd.isra.0+0x71/0xc0
[    0.370282]  [<ffffffff81306811>] pci_device_probe+0x101/0x160
[    0.370288]  [<ffffffff813e8579>] driver_probe_device+0x209/0x4c0
[    0.370292]  [<ffffffff813e890b>] __driver_attach+0x9b/0xa0
[    0.370296]  [<ffffffff813e8870>] ? __device_attach+0x40/0x40
[    0.370299]  [<ffffffff813e62d3>] bus_for_each_dev+0x73/0xc0
[    0.370303]  [<ffffffff813e7e3e>] driver_attach+0x1e/0x20
[    0.370307]  [<ffffffff813e7a00>] bus_add_driver+0x180/0x250
[    0.370310]  [<ffffffff81909981>] ? uncore_types_exit+0x26/0x26
[    0.370313]  [<ffffffff813e9124>] driver_register+0x64/0xf0
[    0.370316]  [<ffffffff81305ddb>] __pci_register_driver+0x4b/0x50
[    0.370318]  [<ffffffff81909a49>] intel_uncore_init+0xc8/0x2ad
[    0.370321]  [<ffffffff81909981>] ? uncore_types_exit+0x26/0x26
[    0.370325]  [<ffffffff81002128>] do_one_initcall+0xb8/0x200
[    0.370330]  [<ffffffff818fb1ab>] kernel_init_freeable+0x170/0x211
[    0.370333]  [<ffffffff815744d0>] ? rest_init+0x80/0x80
[    0.370336]  [<ffffffff815744de>] kernel_init+0xe/0xf0
[    0.370338]  [<ffffffff815834e2>] ret_from_fork+0x42/0x70
[    0.370341]  [<ffffffff815744d0>] ? rest_init+0x80/0x80
[    0.370346] ---[ end trace 61fa425c820ae03b ]---
[    0.370427] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[    0.370435] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[    0.370485] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.370528] Scanning for low memory corruption every 60 seconds
[    0.370854] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.370869] Initialise system trusted keyring
[    0.371320] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.373483] zpool: loaded
[    0.373487] zbud: loaded
[    0.373711] VFS: Disk quotas dquot_6.6.0
[    0.373762] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373981] Key type big_key registered
[    0.374192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.374227] io scheduler noop registered
[    0.374232] io scheduler deadline registered (default)
[    0.374275] io scheduler cfq registered
[    0.374650] aer 0000:00:1c.0:pcie02: service driver aer loaded
[    0.374671] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.374674] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.374679] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.374686] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.374706] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.374725] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.374726] vesafb: scrolling: redraw
[    0.374728] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.374749] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[    0.378872] Console: switching to colour frame buffer device 170x48
[    0.382695] fb0: VESA VGA frame buffer device
[    0.382720] intel_idle: MWAIT substates: 0x11142120
[    0.382722] intel_idle: v0.4 model 0x45
[    0.382724] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.382914] GHES: HEST is not enabled!
[    0.383001] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.383583] Linux agpgart interface v0.103
[    0.383835] rtc_cmos 00:03: RTC can wake from S4
[    0.383998] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.384029] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.384045] Intel P-state driver initializing.
[    0.384166] ledtrig-cpu: registered to indicate activity on CPUs
[    0.384869] NET: Registered protocol family 10
[    0.385254] NET: Registered protocol family 17
[    0.385898] Loading compiled-in X.509 certificates
[    0.385924] registered taskstats version 1
[    0.386383]   Magic number: 4:299:839
[    0.386502] rtc_cmos 00:03: setting system clock to 2016-02-14 14:48:18 UTC (1455461298)
[    0.386652] PM: Hibernation image not present or could not be loaded.
[    0.387257] Freeing unused kernel memory: 1188K (ffffffff818e2000 - ffffffff81a0b000)
[    0.387260] Write protecting the kernel read-only data: 8192k
[    0.387750] Freeing unused kernel memory: 468K (ffff88000158b000 - ffff880001600000)
[    0.387954] Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000)
[    0.397549] udevd[52]: starting version 3.1.5
[    0.397763] random: udevd urandom read with 1 bits of entropy available
[    0.416099] sdhci: Secure Digital Host Controller Interface driver
[    0.416102] sdhci: Copyright(c) Pierre Ossman
[    0.420609] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.420613] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.421644] i8042: Warning: Keylock active
[    0.421803] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.423383] ACPI: bus type USB registered
[    0.423419] usbcore: registered new interface driver usbfs
[    0.423432] usbcore: registered new interface driver hub
[    0.423455] usbcore: registered new device driver usb
[    0.423991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.424203] ehci-pci: EHCI PCI platform driver
[    0.424407] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.424416] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.424430] ehci-pci 0000:00:1d.0: debug port 2
[    0.428335] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.428355] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe051f800
[    0.430447] SCSI subsystem initialized
[    0.441801] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.442017] libata version 3.00 loaded.
[    0.442094] hub 1-0:1.0: USB hub found
[    0.442105] hub 1-0:1.0: 2 ports detected
[    0.442754] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.442765] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.443851] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    0.443858] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.446609] hub 2-0:1.0: USB hub found
[    0.446625] hub 2-0:1.0: 8 ports detected
[    0.447187] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.447193] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.447422] hub 3-0:1.0: USB hub found
[    0.447435] hub 3-0:1.0: 4 ports detected
[    0.447656] ahci 0000:00:1f.2: version 3.0
[    0.447856] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.447874] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[    0.447878] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm sds apst 
[    0.448381] scsi host0: ahci
[    0.448574] scsi host1: ahci
[    0.448649] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 42
[    0.448651] ata2: DUMMY
[    0.449227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.761802] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[    0.761838] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.791798] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.792046] ata1.00: ATA-10: SC2 M2 SSD, S9FM01.8, max UDMA/133
[    0.792051] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.792269] ata1.00: configured for UDMA/133
[    0.792448] scsi 0:0:0:0: Direct-Access     ATA      SC2 M2 SSD       01.8 PQ: 0 ANSI: 5
[    0.794237] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.794292] sd 0:0:0:0: [sda] Write Protect is off
[    0.794296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.794313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.795214]  sda: sda1 sda2 sda3 sda4
[    0.795612] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.849121] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    0.912391] hub 1-1:1.0: USB hub found
[    0.912459] hub 1-1:1.0: 8 ports detected
[    1.141691] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[    1.361029] udevd[340]: starting version 3.1.5
[    1.361654] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[    1.361659] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1422315cd49, max_idle_ns: 440795270477 ns
[    1.462559] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.462608] ACPI: Lid Switch [LID0]
[    1.462668] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.462673] ACPI: Power Button [PWRB]
[    1.462720] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.462723] ACPI: Sleep Button [TPAD]
[    1.462767] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input4
[    1.462770] ACPI: Sleep Button [TSCR]
[    1.462833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.462835] ACPI: Power Button [PWRF]
[    1.473321] thermal LNXTHERM:00: registered as thermal_zone0
[    1.473326] ACPI: Thermal Zone [THRM] (28 C)
[    1.479542] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.479708] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.499296] ACPI: AC Adapter [AC] (on-line)
[    1.601650] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[    1.616950] [drm] Initialized drm 1.1.0 20060810
[    1.617984] ACPI: Battery Slot [BAT0] (battery absent)
[    1.622598] media: Linux media interface: v0.10
[    1.646545] Linux video capture interface: v2.00
[    1.652190] dw_dmac_pci 0000:00:15.0: DesignWare DMA Controller, 8 channels
[    1.653076] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.694064] Bluetooth: Core ver 2.20
[    1.694082] NET: Registered protocol family 31
[    1.694084] Bluetooth: HCI device and connection manager initialized
[    1.694088] Bluetooth: HCI socket layer initialized
[    1.694092] Bluetooth: L2CAP socket layer initialized
[    1.694099] Bluetooth: SCO socket layer initialized
[    1.706392] cfg80211: Calling CRDA to update world regulatory domain
[    1.708936] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:036e)
[    1.713516] usbcore: registered new interface driver btusb
[    1.720264] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.725677] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input7
[    1.725731] usbcore: registered new interface driver uvcvideo
[    1.725733] USB Video Class driver (1.1.1)
[    1.726449] Bluetooth: hci0: read Intel version: 370710018002030d00
[    1.731720] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    1.733803] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    1.747690] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    1.747695] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.747698] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    1.747700] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    1.747702] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    1.747705] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    1.747708] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    1.768349] Intel(R) Wireless WiFi driver for Linux
[    1.768353] Copyright(c) 2003- 2015 Intel Corporation
[    1.772847] iwlwifi 0000:01:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
[    1.773913] [drm] Memory usable by graphics device = 2048M
[    1.773919] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.773921] fb: switching to inteldrmfb from VESA VGA
[    1.773956] Console: switching to colour dummy device 80x25
[    1.777021] [drm] Replacing VGA console driver
[    1.777865] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.777867] [drm] Driver supports precise vblank timestamp query.
[    1.777966] [drm] applying backlight present quirk
[    1.777989] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.796686] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    1.797549] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    1.797624] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    1.825624] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[    1.831389] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    1.831632] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    1.832064] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    1.832083] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    1.835481] fbcon: inteldrmfb (fb0) is primary device
[    1.853089] Adding 9764860k swap on /dev/sda2.  Priority:-1 extents:1 across:9764860k SSFS
[    1.867442] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    1.903167] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered,discard
[    1.906293] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered,discard
[    1.913780] iTCO_vendor_support: vendor-support=0
[    1.918685] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
[    1.918759] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input13
[    1.918823] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input14
[    1.922375] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.922437] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060)
[    1.931328] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.945664] intel_rapl: Found RAPL domain package
[    1.945667] intel_rapl: Found RAPL domain core
[    1.945669] intel_rapl: Found RAPL domain uncore
[    1.945671] intel_rapl: Found RAPL domain dram
[    2.038966] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.161683] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:15.1/i2c-0/0-0067/input/input15
[    2.164290] mousedev: PS/2 mouse device common for all mice
[    2.361759] Switched to clocksource tsc
[    2.963887] Console: switching to colour frame buffer device 170x48
[    2.970361] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.970364] i915 0000:00:02.0: registered panic notifier
[    4.851135] cfg80211: Calling CRDA to update world regulatory domain
[    5.111084] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.121405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.134425] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.430989] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    5.431230] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    5.624910] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    5.625152] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[    5.640481] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.186869] random: nonblocking pool is initialized
[    6.290757] cfg80211: Calling CRDA to update world regulatory domain
[    8.000656] cfg80211: Calling CRDA to update world regulatory domain
[    9.164798] cfg80211: Calling CRDA to update world regulatory domain
[    9.165512] wlan0: authenticate with e0:91:53:16:c9:c1
[    9.168787] wlan0: send auth to e0:91:53:16:c9:c1 (try 1/3)
[    9.261594] wlan0: authenticated
[    9.261889] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
[    9.261900] iwlwifi 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[    9.270432] wlan0: associate with e0:91:53:16:c9:c1 (try 1/3)
[    9.273843] wlan0: RX AssocResp from e0:91:53:16:c9:c1 (capab=0x431 status=0 aid=12)
[    9.275605] wlan0: associated
[    9.275670] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    9.275762] cfg80211: Calling CRDA to update world regulatory domain
[   10.586808] fuse init (API version 7.23)
[   11.149979] cfg80211: Calling CRDA to update world regulatory domain
[   11.566243] EXT4-fs (sda1): re-mounted. Opts: data=ordered,discard,commit=0
[   11.583543] EXT4-fs (sda3): re-mounted. Opts: data=ordered,discard,commit=0
[   11.587889] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard,commit=0
[   14.299531] cfg80211: Calling CRDA to update world regulatory domain
[   17.448964] cfg80211: Calling CRDA to update world regulatory domain
[   20.598456] cfg80211: Calling CRDA to update world regulatory domain
[   23.747808] cfg80211: Calling CRDA to update world regulatory domain
[   26.897176] cfg80211: Calling CRDA to update world regulatory domain
[   30.046554] cfg80211: Calling CRDA to update world regulatory domain
[   33.195936] cfg80211: Calling CRDA to update world regulatory domain
[   36.345358] cfg80211: Calling CRDA to update world regulatory domain
[   39.494746] cfg80211: Calling CRDA to update world regulatory domain
[   42.644167] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#6 2016-02-14 14:58:18

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

Yes, DM works, at least

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#7 2016-02-19 10:14:58

nous
Member
From: Across the Universe
Registered: 2006-08-18
Posts: 323
Website

Re: [openrc] tty* disappears after a while

Could you disable KMS and test if it still happens?

systemd-free.artixlinux.org

Offline

#8 2016-02-20 18:46:55

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

nous wrote:

Could you disable KMS and test if it still happens?

It does not work: X does not start

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#9 2016-02-23 08:27:20

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

Related to this. After a while, the XFCE letters are gone (see this image: http://postimg.org/image/6680d783p/)

Owning one OpenRC (artoo way) and other three systemd machines

Offline

#10 2016-02-23 16:28:28

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,793

Re: [openrc] tty* disappears after a while

Moving to 'AUR Issues, Discussion, and PKGBUILD Requests'

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#11 2016-02-23 21:26:34

nous
Member
From: Across the Universe
Registered: 2006-08-18
Posts: 323
Website

Re: [openrc] tty* disappears after a while

Has this started to happen after an openrc, xorg-*, gfx driver or kernel upgrade? If so, could you downgrade the respective one?

Last edited by nous (2016-02-23 21:56:27)

systemd-free.artixlinux.org

Offline

#12 2016-02-29 07:00:49

xanb
Member
Registered: 2012-07-24
Posts: 418

Re: [openrc] tty* disappears after a while

I do not know when it was started. It seems like with old old kernel (3.17) all is OK

Owning one OpenRC (artoo way) and other three systemd machines

Offline

Pages: 1

Board footer

Powered by FluxBB