You are not logged in.

#26 2016-07-13 16:05:18

BlissfulChoreography
Member
Registered: 2008-12-19
Posts: 7

Re: Few issues with Asus UX501VW

Just remembered - by default tap-to-click is turned off with libinput, but there is no option in Gnome 3.20 settings to turn it on. There is probably some command line to do it, but I did it as follows:
I disabled bbswitch so that the discrete card would be on. I installed xf86-input-libinput, uninstalled all other xf86-input and logged into Gnome on X.  Magically the tap-to-click option appeared so I toggled it. When I reverted to pure Wayland, tap-to-click remained active. It still does not work on gdm, but that's not that big and issue.

Offline

#27 2016-07-13 16:53:23

MaikuMori
Member
From: Latvia
Registered: 2013-05-29
Posts: 11
Website

Re: Few issues with Asus UX501VW

I'm talking about multi-finger gestures and overall quality of moving the pointer. Libinput seems to be way worse, but maybe it was some sort of configuration issue. Also there are still programs which don't work with wayland (video editors, etc).

Offline

#28 2016-07-14 18:08:47

brunoloff
Member
Registered: 2016-07-14
Posts: 1

Re: Few issues with Asus UX501VW

That's weird, I am still getting the headphone noise (high pitch whistle), despite having kernel 4.6

$ uname -srv
Linux 4.6.3-1-ARCH #1 SMP PREEMPT Fri Jun 24 21:19:13 CEST 2016

Any ideas?

Offline

#29 2016-07-14 19:51:08

MaikuMori
Member
From: Latvia
Registered: 2013-05-29
Posts: 11
Website

Re: Few issues with Asus UX501VW

I'm still getting the noise too. As described before right after restart it seems to be fine, but it comes back after a while.

Offline

#30 2016-07-15 09:50:45

Epoxyc
Member
From: Japan
Registered: 2016-03-01
Posts: 18

Re: Few issues with Asus UX501VW

Using Wayland instead of X is a solution. I choose this computer for its battery life and, with X, I have to start bumblebeed service AFTER GDM session to disable discrete card (with bbswitch loaded), else, battery life is reduced by 2. But Gnome on Wayland, although very close to X, still have few lack.
For the touchpad, I had some issue with a recent arch update, uninstalling synaptics package for libinput fix this (since, horizontal scroll is very sensitive, but I don't need it).
Do you guys have a working memory card reader ?

Offline

#31 2016-09-05 11:47:25

CrystalSkull
Member
Registered: 2016-09-05
Posts: 4

Re: Few issues with Asus UX501VW

Do you guys still have the noise? It appears after suspend for me.

Furthermore, I have a problem with the touchpad not having any gestures. Any ideas how to solve this?

Offline

#32 2016-09-09 09:38:47

Epoxyc
Member
From: Japan
Registered: 2016-03-01
Posts: 18

Re: Few issues with Asus UX501VW

Yes, noise is still here after susend, but I never do that.
With acpi_osi=! acpi_osi="Windows 2009" kernel options, Nvidia issue is fixed, but brightness media keys don't work.
I'm trying to find a way to get all built in strings, in order to identify which have to be disabled to get media keys working, but it seems impossible.

Offline

#33 2016-09-13 08:48:33

wa1demar
Member
Registered: 2013-07-09
Posts: 4

Re: Few issues with Asus UX501VW

On my device I have no any problem with sound and my touchpad is working but multitouch isn't. Only 1 finger click to touchpad(
Core : 4.7

Offline

#34 2016-09-27 09:30:03

wa1demar
Member
Registered: 2013-07-09
Posts: 4

Re: Few issues with Asus UX501VW

X.log

5.888] (II) config/udev: Adding input device FTE1001:00 0B05:0101 (/dev/input/event9)
[     5.888] (**) FTE1001:00 0B05:0101: Applying InputClass "evdev pointer catchall"
[     5.888] (**) FTE1001:00 0B05:0101: Applying InputClass "libinput pointer catchall"
[     5.888] (II) Using input driver 'libinput' for 'FTE1001:00 0B05:0101'
[     5.888] (**) FTE1001:00 0B05:0101: always reports core events
[     5.889] (**) Option "Device" "/dev/input/event9"
[     5.889] (**) Option "_source" "server/udev"
[     5.994] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event9 is tagged by udev as: Mouse
[     5.994] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event9 is a pointer caps
[     6.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-FTE1001:00/0018:0B05:0101.0001/input/input9/event9"
[     6.037] (II) XINPUT: Adding extended input device "FTE1001:00 0B05:0101" (type: MOUSE, id 11)
[     6.037] (**) Option "AccelerationScheme" "none"
[     6.037] (**) FTE1001:00 0B05:0101: (accel) selected scheme none/0
[     6.037] (**) FTE1001:00 0B05:0101: (accel) acceleration factor: 2.000
[     6.037] (**) FTE1001:00 0B05:0101: (accel) acceleration threshold: 4
[     6.038] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event9 is tagged by udev as: Mouse
[     6.038] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event9 is a pointer caps
[     6.039] (II) config/udev: Adding input device FTE1001:00 0B05:0101 (/dev/input/mouse0)
[     6.039] (II) No input driver specified, ignoring this device.
[     6.039] (II) This device may have been added with another device file.

Offline

#35 2016-09-30 16:25:44

wa1demar
Member
Registered: 2013-07-09
Posts: 4

Re: Few issues with Asus UX501VW

~ ❯❯❯ dmesg | grep -i mouse
[    2.607592] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[    2.671806] mousedev: PS/2 mouse device common for all mice
[    2.844449] hid-generic 0018:0B05:0101.0003: input,hidraw2: I2C HID v1.00 Mouse [FTE1001:00 0B05:0101] on i2c-FTE1001:00

FTE1001:00 0B05:0101 - is my touchpad sad

Offline

#36 2016-10-02 00:10:29

CrystalSkull
Member
Registered: 2016-09-05
Posts: 4

Re: Few issues with Asus UX501VW

I have pretty much the exact same logs.

[     9.285] (II) config/udev: Adding input device FTE1001:00 0B05:0101 (/dev/input/event13)
[     9.285] (**) FTE1001:00 0B05:0101: Applying InputClass "libinput pointer catchall"
[     9.285] (**) FTE1001:00 0B05:0101: Applying InputClass "libinput pointer catchall"
[     9.285] (II) Using input driver 'libinput' for 'FTE1001:00 0B05:0101'
[     9.285] (**) FTE1001:00 0B05:0101: always reports core events
[     9.285] (**) Option "Device" "/dev/input/event13"
[     9.285] (**) Option "_source" "server/udev"
[     9.387] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event13 is tagged by udev as: Mouse
[     9.387] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event13 is a pointer caps
[     9.413] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-FTE1001:00/0018:0B05:0101.0001/input/input13/event13"
[     9.413] (II) XINPUT: Adding extended input device "FTE1001:00 0B05:0101" (type: MOUSE, id 11)
[     9.413] (**) Option "AccelerationScheme" "none"
[     9.414] (**) FTE1001:00 0B05:0101: (accel) selected scheme none/0
[     9.414] (**) FTE1001:00 0B05:0101: (accel) acceleration factor: 2.000
[     9.414] (**) FTE1001:00 0B05:0101: (accel) acceleration threshold: 4
[     9.415] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event13 is tagged by udev as: Mouse
[     9.415] (II) input device 'FTE1001:00 0B05:0101', /dev/input/event13 is a pointer caps
[     9.416] (II) config/udev: Adding input device FTE1001:00 0B05:0101 (/dev/input/mouse0)
[     9.416] (II) No input driver specified, ignoring this device.
[     9.416] (II) This device may have been added with another device file.
>>> dmesg | grep -i mouse
[    7.346173] hid-generic 0018:0B05:0101.0001: input,hidraw0: I2C HID v1.00 Mouse [FTE1001:00 0B05:0101] on i2c-FTE1001:00
[    7.350200] mousedev: PS/2 mouse device common for all mice

Last edited by CrystalSkull (2016-10-02 00:11:05)

Offline

#37 2016-10-02 00:13:59

CrystalSkull
Member
Registered: 2016-09-05
Posts: 4

Re: Few issues with Asus UX501VW

wa1demar wrote:

On my device I have no any problem with sound ...

Could you confirm that you have no problems with sound even after suspend?
Are you using any non-default configs for alsa?

Offline

#38 2016-10-12 19:23:00

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

Hi guys!

I am going to buy the Asus UX501VW. Any issue I must know? Or they are all fixed in the new updates of Arch?

And finally, does it work well in this Laptop? Thanks!

Offline

#39 2016-10-12 23:49:02

CrystalSkull
Member
Registered: 2016-09-05
Posts: 4

Re: Few issues with Asus UX501VW

There are two things that do not work work me:

  • Multi-touch scroll ( Or any scroll for that matter )

  • High pitch noise when using headphones after suspend

Offline

#40 2016-10-16 10:42:15

Epoxyc
Member
From: Japan
Registered: 2016-03-01
Posts: 18

Re: Few issues with Asus UX501VW

@karlospv94 : I have edited the first post. https://wiki.archlinux.org/index.php/AS … _Pro_UX501 can help you.
AS you can see, some people have issue with touchpad or headphones after suspend, but I don't have these problems.

Offline

#41 2016-10-21 13:21:39

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

Epoxyc wrote:

@karlospv94 : I have edited the first post. https://wiki.archlinux.org/index.php/AS … _Pro_UX501 can help you.
AS you can see, some people have issue with touchpad or headphones after suspend, but I don't have these problems.

Okay thanks! I will install it this weekend and I will let a comment.

Offline

#42 2016-10-22 15:46:34

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

Each tim eI reboot the computer I have this message:
watch dog did not stop!
And it remains without rebooting, how could I fix it?

Last edited by karlospv94 (2016-10-22 20:36:31)

Offline

#43 2016-10-25 08:46:39

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

Hey guys!

Do you know any solution for the brightness keys and for the multi-gesture touchpad problem? I have found this library but don't tested it: https://github.com/jmesmon/illum

Someone has tried it or has a solution for this troubles?

PS.: I have tried Ubuntu and it has the same problems (brightness control and multi-gesture touchpad don't work)

Offline

#44 2016-10-31 19:21:53

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

TheHebes wrote:

Hopping on the train for getting issues on this laptop all worked out.
When I load the bbswitch module, my fans kick on to 100% after a short delay; has anyone else observed this behavior?

Also, I've found that the trackpad works fine with the version of linux in the repos ATM (4.4.3-1), no need to compile mainline.
Installing xf86-input-synaptics was enough.


Multi-gesture of the touchpad works for you?

Offline

#45 2016-11-07 16:10:58

amenzhisnky
Member
From: Minsk
Registered: 2013-12-01
Posts: 27

Re: Few issues with Asus UX501VW

Hi guys, I got the same laptop and currently I'm having the same problems like most of you:
1. Headphones don't work after suspend
2. Cannot change brightness level using fn buttons, only using the sysfs
3. Wifi driver is really bad, thanks to realtek

Currently I decided to stick to these kernel parameters

acpi_osi=! acpi_osi="Windows 2009" acpi_backlight=native rw

Offline

#46 2016-11-08 09:32:06

Lekensteyn
Member
From: Netherlands
Registered: 2012-06-19
Posts: 192
Website

Re: Few issues with Asus UX501VW

amenzhisnky wrote:

2. Cannot change brightness level using fn buttons, only using the sysfs

Possibly related to this i915 issue:
https://bugs.freedesktop.org/show_bug.cgi?id=81762

Offline

#47 2016-11-09 16:54:57

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

What is not possible apparently to get working is the multi-gesture in the touchpad

Offline

#48 2016-11-15 09:22:50

amenzhisnky
Member
From: Minsk
Registered: 2013-12-01
Posts: 27

Re: Few issues with Asus UX501VW

Lekensteyn wrote:
amenzhisnky wrote:

2. Cannot change brightness level using fn buttons, only using the sysfs

Possibly related to this i915 issue:
https://bugs.freedesktop.org/show_bug.cgi?id=81762

It happens if I change kernel parameters from

acpi_osi=

to

acpi_osi=! acpi_osi="Windows 2009"

because I want to switch off my discrete card via bbswitch, since I noticed that my laptop was way hotter when I used nouveau auto pm.

Offline

#49 2016-11-15 09:26:19

karlospv94
Member
Registered: 2016-10-12
Posts: 78

Re: Few issues with Asus UX501VW

Have you installed nvidia drivers? I cannot get working the fn buttons with nvidia and nvidia-utils instead of the acpi_osi=

Offline

#50 2016-11-18 11:00:10

ladrik
Member
Registered: 2016-11-18
Posts: 1

Re: Few issues with Asus UX501VW

For those interested, there is a recent solution for the multi-touch issue:

A new kernel driver is being developed by Victor Vlasenko and others that is intended to be submitted to the kernel branch once it is fully tested.

Here is the repository: https://github.com/vlasenko/hid-asus-fte-dkms

It is working for me, either with synaptics or libinput Xorg driver, doing the following, in the directory where you want to download the code.

$ git clone https://github.com/vlasenko/hid-asus-fte-dkms
$ cd hid-asus-fte-dkms
$ ./dkms-add.sh

To make the module load permanent, i've added a .conf file in /etc/modules-load.d. Here is mine:

$ cat /etc/modules-load.d/touchpad.conf 
# Load hid_asus_fte 
hid_asus_fte

Last edited by ladrik (2016-11-18 11:07:17)

Offline

Board footer

Powered by FluxBB