You are not logged in.

#1 2016-03-07 00:55:07

rollenwiese
Member
Registered: 2008-02-24
Posts: 69

[SOLVED] virtualbox and xorg

SOLVED xterm was missing....

---

Can't seem to get xorg working under virtualbox with an Arch guest. Works fine for Ubuntu.

Followed setup instructions per wiki.

vbox modules are loaded on the guest, and VBoxClient-all is humming along.

Not sure where to start with this. Also not sure why there are nouveau references in the error as I am not using it on guest or host.

Any help or pointers much appreciated.

xinit results in the following (error at the bottom):

X.Org X Server 1.18.1
Release Date: 2016-02-08
[    50.189] X Protocol Version 11, Revision 0
[    50.189] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[    50.189] Current Operating System: Linux test01 4.4.3-1-ARCH #1 SMP PREEMPT Fri Feb 26 15:09:29 CET 2016 x86_64
[    50.189] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw vga=773 initrd=../initramfs-linux.img
[    50.189] Build Date: 11 February 2016  09:57:03AM
[    50.189]  
[    50.190] Current version of pixman: 0.34.0
[    50.190] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    50.190] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    50.191] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar  6 19:31:36 2016
[    50.193] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    50.195] (==) No Layout section.  Using the first Screen section.
[    50.195] (==) No screen section available. Using defaults.
[    50.195] (**) |-->Screen "Default Screen Section" (0)
[    50.195] (**) |   |-->Monitor "<default monitor>"
[    50.196] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    50.196] (==) Automatically adding devices
[    50.196] (==) Automatically enabling devices
[    50.196] (==) Automatically adding GPU devices
[    50.197] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    50.199] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    50.199] 	Entry deleted from font path.
[    50.203] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    50.203] (==) ModulePath set to "/usr/lib/xorg/modules"
[    50.203] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    50.203] (II) Loader magic: 0x81ad60
[    50.203] (II) Module ABI versions:
[    50.203] 	X.Org ANSI C Emulation: 0.4
[    50.203] 	X.Org Video Driver: 20.0
[    50.203] 	X.Org XInput driver : 22.1
[    50.203] 	X.Org Server Extension : 9.0
[    50.204] (--) using VT number 2

[    50.204] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    50.204] (II) xfree86: Adding drm device (/dev/dri/card0)
[    50.206] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728
[    50.206] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    50.207] (II) LoadModule: "glx"
[    50.209] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    50.224] (II) Module glx: vendor="X.Org Foundation"
[    50.224] 	compiled for 1.18.1, module version = 1.0.0
[    50.224] 	ABI class: X.Org Server Extension, version 9.0
[    50.224] (==) AIGLX enabled
[    50.224] (==) Matched vboxvideo as autoconfigured driver 0
[    50.224] (==) Matched vboxvideo as autoconfigured driver 1
[    50.224] (==) Matched modesetting as autoconfigured driver 2
[    50.224] (==) Matched fbdev as autoconfigured driver 3
[    50.224] (==) Matched vesa as autoconfigured driver 4
[    50.224] (==) Assigned the driver to the xf86ConfigLayout
[    50.224] (II) LoadModule: "vboxvideo"
[    50.225] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[    50.225] (II) Module vboxvideo: vendor="Oracle Corporation"
[    50.225] 	compiled for 1.18.1, module version = 1.0.1
[    50.225] 	Module class: X.Org Video Driver
[    50.225] 	ABI class: X.Org Video Driver, version 20.0
[    50.225] (**) Load address of symbol "VBOXVIDEO" is 0x7fce6660e3e0
[    50.225] (II) LoadModule: "modesetting"
[    50.226] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    50.226] (II) Module modesetting: vendor="X.Org Foundation"
[    50.226] 	compiled for 1.18.1, module version = 1.18.1
[    50.226] 	Module class: X.Org Video Driver
[    50.226] 	ABI class: X.Org Video Driver, version 20.0
[    50.226] (II) LoadModule: "fbdev"
[    50.227] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    50.227] (II) Module fbdev: vendor="X.Org Foundation"
[    50.227] 	compiled for 1.18.0, module version = 0.4.4
[    50.227] 	Module class: X.Org Video Driver
[    50.227] 	ABI class: X.Org Video Driver, version 20.0
[    50.227] (II) LoadModule: "vesa"
[    50.227] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    50.228] (II) Module vesa: vendor="X.Org Foundation"
[    50.228] 	compiled for 1.18.0, module version = 2.3.4
[    50.228] 	Module class: X.Org Video Driver
[    50.228] 	ABI class: X.Org Video Driver, version 20.0
[    50.228] (II) VBoxVideo: guest driver for VirtualBox: vbox
[    50.228] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    50.228] (II) FBDEV: driver for framebuffer: fbdev
[    50.228] (II) VESA: driver for VESA chipsets: vesa
[    50.230] (WW) Falling back to old probe method for modesetting
[    50.230] (WW) Falling back to old probe method for fbdev
[    50.230] (II) Loading sub module "fbdevhw"
[    50.230] (II) LoadModule: "fbdevhw"
[    50.230] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    50.231] (II) Module fbdevhw: vendor="X.Org Foundation"
[    50.231] 	compiled for 1.18.1, module version = 0.0.2
[    50.231] 	ABI class: X.Org Video Driver, version 20.0
[    50.231] (WW) Falling back to old probe method for vesa
[    50.231] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.0.14_OSEr105127
[    50.231] (II) Loading sub module "ramdac"
[    50.231] (II) LoadModule: "ramdac"
[    50.231] (II) Module "ramdac" already built-in
[    50.231] (II) Loading sub module "fb"
[    50.231] (II) LoadModule: "fb"
[    50.231] (II) Loading /usr/lib/xorg/modules/libfb.so
[    50.232] (II) Module fb: vendor="X.Org Foundation"
[    50.232] 	compiled for 1.18.1, module version = 1.0.0
[    50.232] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    50.232] (II) Loading sub module "shadowfb"
[    50.232] (II) LoadModule: "shadowfb"
[    50.232] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    50.233] (II) Module shadowfb: vendor="X.Org Foundation"
[    50.233] 	compiled for 1.18.1, module version = 1.0.0
[    50.233] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    50.233] (II) Loading sub module "vgahw"
[    50.233] (II) LoadModule: "vgahw"
[    50.233] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    50.234] (II) Module vgahw: vendor="X.Org Foundation"
[    50.234] 	compiled for 1.18.1, module version = 0.1.0
[    50.234] 	ABI class: X.Org Video Driver, version 20.0
[    50.234] (II) Loading sub module "dri2"
[    50.234] (II) LoadModule: "dri2"
[    50.234] (II) Module "dri2" already built-in
[    50.234] (II) VBoxVideo(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    50.234] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[    50.234] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
[    50.234] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[    50.234] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    50.234] (**) VBoxVideo(0):  Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[    50.234] (II) VBoxVideo(0): Modeline "800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    50.234] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    50.234] (==) VBoxVideo(0): RGB weight 888
[    50.234] (==) VBoxVideo(0): Default visual is TrueColor
[    50.234] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[    50.234] (==) VBoxVideo(0): DPI set to (96, 96)
[    50.234] (II) UnloadModule: "modesetting"
[    50.234] (II) Unloading modesetting
[    50.234] (II) UnloadModule: "fbdev"
[    50.234] (II) Unloading fbdev
[    50.234] (II) UnloadSubModule: "fbdevhw"
[    50.234] (II) Unloading fbdevhw
[    50.234] (II) UnloadModule: "vesa"
[    50.234] (II) Unloading vesa
[    50.234] (--) Depth 24 pixmap format is 32 bpp
[    50.238] (II) VBoxVideo(0): [DRI2] Setup complete
[    50.238] (II) VBoxVideo(0): [DRI2]   DRI driver: vboxvideo
[    50.296] (II) VBoxVideo(0): Requested monitor count: 1
[    50.297] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[    50.297] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[    50.297] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[    50.297] (II) VBoxVideo(0): Modeline "1894x933"x60.0  107.05  1894 1896 1898 1900  933 935 937 939 (56.3 kHz Pb)
[    50.297] (II) VBoxVideo(0): Modeline "2560x1600"x60.0  247.26  2560 2562 2564 2566  1600 1602 1604 1606 (96.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "2560x1440"x60.0  222.63  2560 2562 2564 2566  1440 1442 1444 1446 (86.8 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "2048x1536"x60.0  190.04  2048 2050 2052 2054  1536 1538 1540 1542 (92.5 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1920x1600"x60.0  185.59  1920 1922 1924 1926  1600 1602 1604 1606 (96.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1920x1080"x60.0  125.50  1920 1922 1924 1926  1080 1082 1084 1086 (65.2 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1680x1050"x60.0  106.82  1680 1682 1684 1686  1050 1052 1054 1056 (63.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1400x1050"x60.0   89.08  1400 1402 1404 1406  1050 1052 1054 1056 (63.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1280x1024"x60.0   79.47  1280 1282 1284 1286  1024 1026 1028 1030 (61.8 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    50.297] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[    50.297] (II) VBoxVideo(0): Output VGA-0 connected
[    50.297] (II) VBoxVideo(0): Using exact sizes for initial modes
[    50.297] (II) VBoxVideo(0): Output VGA-0 using initial mode 1894x933 +0+0
[    50.297] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    50.297] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    50.298] (==) VBoxVideo(0): DPMS enabled
[    50.298] (--) RandR disabled
[    50.311] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[    50.311] (II) The file referenced, is *NOT* loaded
[    50.311] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[    50.311] (EE) AIGLX error: vboxvideo does not export required DRI extension
[    50.311] (EE) AIGLX: reverting to software rendering
[    50.429] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    50.430] (II) AIGLX: Loaded and initialized swrast
[    50.430] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    50.430] (II) VBoxVideo(0): Setting screen physical size to 501 x 246
[    50.581] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    50.581] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    50.581] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    50.581] (II) LoadModule: "libinput"
[    50.581] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    50.592] (II) Module libinput: vendor="X.Org Foundation"
[    50.592] 	compiled for 1.18.1, module version = 0.17.0
[    50.592] 	Module class: X.Org XInput Driver
[    50.592] 	ABI class: X.Org XInput driver, version 22.1
[    50.592] (II) Using input driver 'libinput' for 'Power Button'
[    50.592] (**) Power Button: always reports core events
[    50.592] (**) Option "Device" "/dev/input/event2"
[    50.592] (**) Option "_source" "server/udev"
[    50.592] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    50.592] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    50.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[    50.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    50.600] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    50.600] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    50.601] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    50.601] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    50.601] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    50.601] (II) Using input driver 'libinput' for 'Sleep Button'
[    50.601] (**) Sleep Button: always reports core events
[    50.601] (**) Option "Device" "/dev/input/event3"
[    50.601] (**) Option "_source" "server/udev"
[    50.601] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    50.601] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    50.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event3"
[    50.610] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    50.610] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    50.610] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    50.610] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    50.610] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    50.610] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    50.610] (II) Using input driver 'libinput' for 'Video Bus'
[    50.610] (**) Video Bus: always reports core events
[    50.610] (**) Option "Device" "/dev/input/event4"
[    50.610] (**) Option "_source" "server/udev"
[    50.611] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    50.611] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    50.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5/event4"
[    50.620] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    50.620] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    50.620] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    50.620] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event7)
[    50.621] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[    50.621] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[    50.621] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[    50.621] (**) VirtualBox mouse integration: always reports core events
[    50.621] (**) Option "Device" "/dev/input/event7"
[    50.621] (**) Option "_source" "server/udev"
[    50.621] (II) input device 'VirtualBox mouse integration', /dev/input/event7 is tagged by udev as: Mouse
[    50.621] (II) input device 'VirtualBox mouse integration', /dev/input/event7 is a pointer caps
[    50.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input8/event7"
[    50.640] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[    50.640] (**) Option "AccelerationScheme" "none"
[    50.640] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[    50.640] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    50.640] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    50.640] (II) input device 'VirtualBox mouse integration', /dev/input/event7 is tagged by udev as: Mouse
[    50.640] (II) input device 'VirtualBox mouse integration', /dev/input/event7 is a pointer caps
[    50.641] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[    50.641] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[    50.641] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[    50.641] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[    50.641] (**) VirtualBox USB Tablet: always reports core events
[    50.641] (**) Option "Device" "/dev/input/event1"
[    50.641] (**) Option "_source" "server/udev"
[    50.694] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    50.694] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    50.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2/event1"
[    50.720] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[    50.720] (**) Option "AccelerationScheme" "none"
[    50.720] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[    50.720] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    50.720] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    50.774] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    50.774] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    50.774] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[    50.774] (II) No input driver specified, ignoring this device.
[    50.774] (II) This device may have been added with another device file.
[    50.775] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[    50.775] (II) No input driver specified, ignoring this device.
[    50.775] (II) This device may have been added with another device file.
[    50.775] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    50.775] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    50.775] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    50.775] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    50.775] (**) AT Translated Set 2 keyboard: always reports core events
[    50.775] (**) Option "Device" "/dev/input/event0"
[    50.775] (**) Option "_source" "server/udev"
[    50.775] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    50.775] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    50.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    50.793] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    50.793] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    50.793] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    50.794] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
[    50.794] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    50.794] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[    50.794] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[    50.794] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    50.794] (**) Option "Device" "/dev/input/event6"
[    50.794] (**) Option "_source" "server/udev"
[    50.794] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event6 is tagged by udev as: Mouse
[    50.794] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event6 is a pointer caps
[    50.813] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    50.813] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[    50.813] (**) Option "AccelerationScheme" "none"
[    50.813] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[    50.813] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    50.813] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    50.814] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event6 is tagged by udev as: Mouse
[    50.814] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event6 is a pointer caps
[    50.814] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[    50.814] (II) No input driver specified, ignoring this device.
[    50.814] (II) This device may have been added with another device file.
[    50.814] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    50.814] (II) No input driver specified, ignoring this device.
[    50.814] (II) This device may have been added with another device file.
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (II) UnloadModule: "libinput"
[    50.930] (EE) 
[    50.930] (EE) Backtrace:
[    50.931] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139) [0x598b99]
[    50.935] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fce6b50b32f]
[    50.935] (EE) 2: /usr/lib/libpthread.so.0 (pthread_barrier_destroy+0x9) [0x7fce6b2c8c19]
[    50.937] (EE) 3: /usr/lib/xorg/modules/dri/swrast_dri.so (nouveau_drm_screen_create+0x22c96f) [0x7fce5d16b18f]
[    50.938] (EE) 4: /usr/lib/xorg/modules/dri/swrast_dri.so (nouveau_drm_screen_create+0x238441) [0x7fce5d182861]
[    50.939] (EE) 5: /usr/lib/xorg/modules/dri/swrast_dri.so (__driDriverGetExtensions_vmwgfx+0x2724bf) [0x7fce5ce5b9df]
[    50.939] (EE) 6: /usr/lib/xorg/modules/dri/swrast_dri.so (__driDriverGetExtensions_vmwgfx+0x272565) [0x7fce5ce5bb45]
[    50.939] (EE) 7: /usr/lib/xorg/modules/dri/swrast_dri.so (__driDriverGetExtensions_vmwgfx+0x27099f) [0x7fce5ce583bf]
[    50.939] (EE) 8: /usr/lib/xorg/modules/extensions/libglx.so (_init+0x1aab4) [0x7fce68f1a664]
[    50.940] (EE) 9: /usr/lib/xorg/modules/extensions/libglx.so (_init+0x1b426) [0x7fce68f1b926]
[    50.940] (EE) 10: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x577) [0x43a437]
[    50.940] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fce6b4f8710]
[    50.940] (EE) 12: /usr/lib/xorg-server/Xorg (_start+0x29) [0x424649]
[    50.941] (EE) 13: ? (?+0x29) [0x29]
[    50.941] (EE) 
[    50.941] (EE) Floating point exception at address 0x7fce6b2c8c19
[    50.941] (EE) 
Fatal server error:
[    50.941] (EE) Caught signal 8 (Floating point exception). Server aborting
[    50.941] (EE) 
[    50.941] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    50.941] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    50.941] (EE) 
[    50.957] (EE) Server terminated with error (1). Closing log file.

Last edited by rollenwiese (2016-03-07 01:24:34)

Offline

Board footer

Powered by FluxBB