You are not logged in.

#1 2016-03-10 12:53:37

Nemu_khao
Member
Registered: 2014-01-25
Posts: 23

Intel head not working for multimonitor with noveau + intel.

3 screens.
2 on nouveau (connected to a graphics card)
1 on motherboard.

lspci -k | grep -A2 -E '(VGA|3D)'

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	Subsystem: Intel Corporation Device 2017
	Kernel driver in use: i915
--
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
	Subsystem: NVIDIA Corporation Device 080a
	Kernel driver in use: nouveau

xorg.conf

Section "ServerLayout"
Identifier     "Layout0"

Screen      0  "ScreenMid" 0 0
Screen      1  "ScreenLeft" LeftOf "ScreenMid"
Screen      2 "ScreenRight" RightOf "ScreenMid"

# Screen 	      "ScreenMid"
# Screen 	      "ScreenLeft"
# Screen 	      "ScreenRight"
EndSection

Section "Monitor"
Identifier     "MonitorRight"
Option	       "PreferredMode"	"1280x1024"
#Option	       "Monitor-VGA1"	"VGA1 monitor"
EndSection

Section "Monitor"
Identifier     "MonitorMid"
#Modeline       "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
#Option	       "PreferredMode"  "1280x1024"  
#Option		"Monitor-DVI-I-1" "DVI-I monitor"
EndSection

Section "Monitor"
Identifier     "MonitorLeft"
Option	       "LeftOf" "MonitorMid"
#Option	       "PreferredMode"  "1280x1024" 
#Option	       "Monitor-VGA2"	"VGA2 monitor"
EndSection

Section "Device"
Identifier     "DeviceRight"
Driver         "intel"
BusID          "PCI:00:02:0"
#Screen          2
EndSection

Section "Device"
Identifier     "DeviceMid"
Driver         "nouveau"
VendorName     "NVIDIA Corporation"
BusID          "PCI:01:00:0"
Screen 	       0
EndSection

Section "Device"
Identifier     "DeviceLeft"
Driver         "nouveau"
VendorName     "NVIDIA Corporation"
BusID          "PCI:01:00:0"
Screen          0
EndSection

Section "Screen"
Identifier     "ScreenRight"
Device         "DeviceRight"
Monitor        "MonitorRight"
# DefaultDepth    24
# SubSection     "Display"
# Depth       24
# EndSubSection
EndSection

Section "Screen"
Identifier     "ScreenMid"
Device         "DeviceMid"
Monitor        "MonitorMid"
# DefaultDepth    24
# SubSection     "Display"
# Depth       24
# EndSubSection
EndSection

Section "Screen"
Identifier     "ScreenLeft"
Device         "DeviceLeft"
Monitor        "MonitorLeft"
# DefaultDepth    24
# SubSection     "Display"
# Depth       24
# EndSubSection
EndSection

Xorg.0.log

[  2133.259] 
X.Org X Server 1.18.1
Release Date: 2016-02-08
[  2133.263] X Protocol Version 11, Revision 0
[  2133.265] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[  2133.266] Current Operating System: Linux localhost 4.4.3-1-ARCH #1 SMP PREEMPT Fri Feb 26 15:09:29 CET 2016 x86_64
[  2133.266] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a569296b-4b77-419a-bb71-3767de2bbfe9 rw quiet
[  2133.269] Build Date: 11 February 2016  09:57:03AM
[  2133.270]  
[  2133.272] Current version of pixman: 0.34.0
[  2133.274] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2133.274] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2133.280] (==) Log file: "/home/dhanjit/.local/share/xorg/Xorg.0.log", Time: Thu Mar 10 17:50:12 2016
[  2133.281] (==) Using config file: "/etc/X11/xorg.conf"
[  2133.283] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2133.283] (==) ServerLayout "Layout0"
[  2133.283] (**) |-->Screen "ScreenMid" (0)
[  2133.283] (**) |   |-->Monitor "MonitorMid"
[  2133.283] (**) |   |-->Device "DeviceMid"
[  2133.283] (**) |-->Screen "ScreenLeft" (1)
[  2133.283] (**) |   |-->Monitor "MonitorLeft"
[  2133.283] (**) |   |-->Device "DeviceLeft"
[  2133.283] (**) |-->Screen "ScreenRight" (2)
[  2133.283] (**) |   |-->Monitor "MonitorRight"
[  2133.283] (**) |   |-->Device "DeviceRight"
[  2133.283] (==) Automatically adding devices
[  2133.283] (==) Automatically enabling devices
[  2133.283] (==) Automatically adding GPU devices
[  2133.283] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2133.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2133.283] 	Entry deleted from font path.
[  2133.283] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2133.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2133.283] 	Entry deleted from font path.
[  2133.283] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2133.283] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[  2133.283] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2133.283] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2133.283] (II) Loader magic: 0x81ad60
[  2133.283] (II) Module ABI versions:
[  2133.283] 	X.Org ANSI C Emulation: 0.4
[  2133.283] 	X.Org Video Driver: 20.0
[  2133.283] 	X.Org XInput driver : 22.1
[  2133.283] 	X.Org Server Extension : 9.0
[  2133.284] (++) using VT number 1

[  2133.284] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  2133.286] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  2133.287] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2133.287] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[  2133.288] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2133.288] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[  2133.289] (--) PCI:*(0:0:2:0) 8086:0102:8086:2017 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[  2133.289] (--) PCI: (0:1:0:0) 10de:0a65:10de:080a rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  2133.289] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2133.289] (II) LoadModule: "glx"
[  2133.289] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2133.290] (II) Module glx: vendor="X.Org Foundation"
[  2133.291] 	compiled for 1.18.1, module version = 1.0.0
[  2133.291] 	ABI class: X.Org Server Extension, version 9.0
[  2133.291] (==) AIGLX enabled
[  2133.291] (II) LoadModule: "nouveau"
[  2133.291] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  2133.291] (II) Module nouveau: vendor="X.Org Foundation"
[  2133.291] 	compiled for 1.18.0, module version = 1.0.12
[  2133.291] 	Module class: X.Org Video Driver
[  2133.291] 	ABI class: X.Org Video Driver, version 20.0
[  2133.291] (II) LoadModule: "intel"
[  2133.291] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2133.291] (II) Module intel: vendor="X.Org Foundation"
[  2133.291] 	compiled for 1.18.1, module version = 2.99.917
[  2133.291] 	Module class: X.Org Video Driver
[  2133.291] 	ABI class: X.Org Video Driver, version 20.0
[  2133.291] (II) NOUVEAU driver 
[  2133.291] (II) NOUVEAU driver for NVIDIA chipset families :
[  2133.291] 	RIVA TNT        (NV04)
[  2133.291] 	RIVA TNT2       (NV05)
[  2133.291] 	GeForce 256     (NV10)
[  2133.291] 	GeForce 2       (NV11, NV15)
[  2133.291] 	GeForce 4MX     (NV17, NV18)
[  2133.291] 	GeForce 3       (NV20)
[  2133.291] 	GeForce 4Ti     (NV25, NV28)
[  2133.291] 	GeForce FX      (NV3x)
[  2133.291] 	GeForce 6       (NV4x)
[  2133.291] 	GeForce 7       (G7x)
[  2133.291] 	GeForce 8       (G8x)
[  2133.291] 	GeForce GTX 200 (NVA0)
[  2133.291] 	GeForce GTX 400 (NVC0)
[  2133.291] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  2133.291] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[  2133.291] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[  2133.291] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[  2133.291] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  2133.292] (II) [drm] nouveau interface version: 1.3.1
[  2133.292] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[  2133.292] (II) intel(1): SNA compiled from 2.99.917-560-gd167280
[  2133.292] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2133.292] (II) Loading sub module "dri2"
[  2133.292] (II) LoadModule: "dri2"
[  2133.292] (II) Module "dri2" already built-in
[  2133.292] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[  2133.292] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"ScreenMid" for depth/fbbpp 24/32
[  2133.292] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[  2133.292] (==) NOUVEAU(0): RGB weight 888
[  2133.292] (==) NOUVEAU(0): Default visual is TrueColor
[  2133.292] (==) NOUVEAU(0): Using HW cursor
[  2133.292] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[  2133.292] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[  2133.292] (==) NOUVEAU(0): Page flipping enabled
[  2133.292] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[  2133.292] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[  2133.292] (II) NOUVEAU(0): Initializing outputs ...
[  2133.326] (II) NOUVEAU(0): Output DVI-I-1 using monitor section MonitorMid
[  2133.327] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[  2133.356] (II) NOUVEAU(0): Output VGA-2 has no monitor section
[  2133.356] (II) NOUVEAU(0): 3 crtcs needed for screen.
[  2133.362] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[  2133.362] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[  2133.393] (II) NOUVEAU(0): EDID for output DVI-I-1
[  2133.393] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[  2133.393] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2133.393] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2133.393] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  2133.393] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[  2133.393] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2133.394] (II) NOUVEAU(0): EDID for output HDMI-1
[  2133.423] (II) NOUVEAU(0): EDID for output VGA-2
[  2133.423] (II) NOUVEAU(0): Manufacturer: DEL  Model: d061  Serial#: 826753877
[  2133.423] (II) NOUVEAU(0): Year: 2014  Week: 8
[  2133.423] (II) NOUVEAU(0): EDID Version: 1.3
[  2133.423] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[  2133.423] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[  2133.423] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[  2133.423] (II) NOUVEAU(0): Gamma: 2.20
[  2133.423] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[  2133.423] (II) NOUVEAU(0): First detailed timing is preferred mode
[  2133.423] (II) NOUVEAU(0): redX: 0.645 redY: 0.333   greenX: 0.320 greenY: 0.626
[  2133.423] (II) NOUVEAU(0): blueX: 0.153 blueY: 0.057   whiteX: 0.312 whiteY: 0.329
[  2133.423] (II) NOUVEAU(0): Supported established timings:
[  2133.423] (II) NOUVEAU(0): 720x400@70Hz
[  2133.423] (II) NOUVEAU(0): 640x480@60Hz
[  2133.423] (II) NOUVEAU(0): 640x480@75Hz
[  2133.423] (II) NOUVEAU(0): 800x600@60Hz
[  2133.423] (II) NOUVEAU(0): 800x600@75Hz
[  2133.423] (II) NOUVEAU(0): 1024x768@60Hz
[  2133.423] (II) NOUVEAU(0): 1024x768@75Hz
[  2133.423] (II) NOUVEAU(0): 1280x1024@75Hz
[  2133.423] (II) NOUVEAU(0): Manufacturer's mask: 0
[  2133.423] (II) NOUVEAU(0): Supported standard timings:
[  2133.423] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  2133.423] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  2133.423] (II) NOUVEAU(0): Supported detailed timing:
[  2133.423] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[  2133.423] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  2133.423] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  2133.423] (II) NOUVEAU(0): Serial No: 5YJ8T42M1GCU
[  2133.423] (II) NOUVEAU(0): Monitor name: DELL E1715S
[  2133.423] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[  2133.423] (II) NOUVEAU(0): EDID (in hex):
[  2133.423] (II) NOUVEAU(0): 	00ffffffffffff0010ac61d055434731
[  2133.423] (II) NOUVEAU(0): 	081801030e221b78ea1161a55552a027
[  2133.423] (II) NOUVEAU(0): 	0e5054a54b00714f8180010101010101
[  2133.423] (II) NOUVEAU(0): 	010101010101302a009851002a403070
[  2133.423] (II) NOUVEAU(0): 	1300520e1100001e000000ff0035594a
[  2133.423] (II) NOUVEAU(0): 	385434324d314743550a000000fc0044
[  2133.423] (II) NOUVEAU(0): 	454c4c204531373135530a20000000fd
[  2133.423] (II) NOUVEAU(0): 	00384c1e510e000a2020202020200090
[  2133.423] (II) NOUVEAU(0): Printing probed modes for output VGA-2
[  2133.423] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  2133.423] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2133.423] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  2133.423] (II) NOUVEAU(0): Output DVI-I-1 connected
[  2133.423] (II) NOUVEAU(0): Output HDMI-1 disconnected
[  2133.423] (II) NOUVEAU(0): Output VGA-2 connected
[  2133.423] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[  2133.423] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768 +0+0
[  2133.423] (II) NOUVEAU(0): Output VGA-2 using initial mode 1024x768 +0+0
[  2133.423] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2133.423] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[  2133.423] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[  2133.423] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2133.423] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[  2133.423] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2133.423] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[  2133.423] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  2133.423] (**) NOUVEAU(0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[  2133.423] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[  2133.423] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[  2133.423] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2133.423] (==) NOUVEAU(0): DPI set to (96, 96)
[  2133.423] (II) Loading sub module "fb"
[  2133.423] (II) LoadModule: "fb"
[  2133.423] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2133.423] (II) Module fb: vendor="X.Org Foundation"
[  2133.423] 	compiled for 1.18.1, module version = 1.0.0
[  2133.423] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2133.423] (II) Loading sub module "shadowfb"
[  2133.423] (II) LoadModule: "shadowfb"
[  2133.423] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  2133.423] (II) Module shadowfb: vendor="X.Org Foundation"
[  2133.423] 	compiled for 1.18.1, module version = 1.0.0
[  2133.423] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2133.423] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[  2133.423] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[  2133.423] (II) intel(1): Creating default Display subsection in Screen section
	"ScreenRight" for depth/fbbpp 24/32
[  2133.423] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[  2133.423] (==) intel(1): RGB weight 888
[  2133.423] (==) intel(1): Default visual is TrueColor
[  2133.424] (II) intel(1): Output VGA1 using monitor section MonitorRight
[  2133.424] (**) intel(1): Option "PreferredMode" "1280x1024"
[  2133.424] (II) intel(1): Enabled output VGA1
[  2133.424] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[  2133.424] (II) intel(1): Output VIRTUAL1 has no monitor section
[  2133.424] (II) intel(1): Enabled output VIRTUAL1
[  2133.424] (--) intel(1): Output VGA1 using initial mode 1280x1024 on pipe 0
[  2133.424] (==) intel(1): TearFree disabled
[  2133.424] (==) intel(1): DPI set to (96, 96)
[  2133.424] (II) Loading sub module "dri2"
[  2133.424] (II) LoadModule: "dri2"
[  2133.424] (II) Module "dri2" already built-in
[  2133.424] (II) Loading sub module "present"
[  2133.424] (II) LoadModule: "present"
[  2133.424] (II) Module "present" already built-in
[  2133.424] (--) Depth 24 pixmap format is 32 bpp
[  2133.431] (II) NOUVEAU(0): Channel setup complete.
[  2133.436] (II) NOUVEAU(0): [COPY] async initialised.
[  2133.437] (II) NOUVEAU(0): Hardware support for Present enabled
[  2133.437] (II) NOUVEAU(0): [DRI2] Setup complete
[  2133.437] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[  2133.437] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[  2133.437] (II) Loading sub module "exa"
[  2133.437] (II) LoadModule: "exa"
[  2133.437] (II) Loading /usr/lib/xorg/modules/libexa.so
[  2133.437] (II) Module exa: vendor="X.Org Foundation"
[  2133.437] 	compiled for 1.18.1, module version = 2.6.0
[  2133.437] 	ABI class: X.Org Video Driver, version 20.0
[  2133.437] (II) EXA(0): Driver allocated offscreen pixmaps
[  2133.437] (II) EXA(0): Driver registered support for the following operations:
[  2133.437] (II)         Solid
[  2133.437] (II)         Copy
[  2133.437] (II)         Composite (RENDER acceleration)
[  2133.437] (II)         UploadToScreen
[  2133.437] (II)         DownloadFromScreen
[  2133.437] (==) NOUVEAU(0): Backing store enabled
[  2133.437] (==) NOUVEAU(0): Silken mouse enabled
[  2133.437] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[  2133.437] (II) NOUVEAU(0): [XvMC] Extension initialized.
[  2133.437] (==) NOUVEAU(0): DPMS enabled
[  2133.437] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2133.437] (--) RandR disabled
[  2133.438] (II) intel(1): SNA initialized with Sandybridge (gen6, gt1) backend
[  2133.438] (==) intel(1): Backing store enabled
[  2133.438] (==) intel(1): Silken mouse enabled
[  2133.438] (II) intel(1): HW Cursor enabled
[  2133.438] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2133.438] (==) intel(1): DPMS enabled
[  2133.438] (==) intel(1): Display hotplug detection enabled
[  2133.438] (II) intel(1): [DRI2] Setup complete
[  2133.438] (II) intel(1): [DRI2]   DRI driver: i965
[  2133.438] (II) intel(1): [DRI2]   VDPAU driver: va_gl
[  2133.438] (II) intel(1): direct rendering: DRI2 enabled
[  2133.438] (II) intel(1): hardware support for Present enabled
[  2133.438] (WW) intel(1): Option "PreferredMode" is not used
[  2133.438] (--) RandR disabled
[  2133.463] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2133.463] (II) AIGLX: enabled GLX_ARB_create_context
[  2133.463] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2133.463] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  2133.463] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2133.463] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2133.463] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  2133.463] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  2133.463] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2133.464] (II) AIGLX: Loaded and initialized nouveau
[  2133.464] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2133.467] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2133.467] (II) AIGLX: enabled GLX_ARB_create_context
[  2133.467] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2133.467] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  2133.467] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2133.467] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2133.467] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  2133.467] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  2133.467] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2133.467] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  2133.467] (II) AIGLX: Loaded and initialized i965
[  2133.467] (II) GLX: Initialized DRI2 GL provider for screen 1
[  2133.469] (II) NOUVEAU(0): NVEnterVT is called.
[  2133.616] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[  2133.616] resize called 1024 768
[  2133.618] (II) intel(1): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2133.618] (II) intel(1): Setting screen physical size to 338 x 270
[  2133.647] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  2133.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2133.647] (II) LoadModule: "evdev"
[  2133.647] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2133.647] (II) Module evdev: vendor="X.Org Foundation"
[  2133.647] 	compiled for 1.18.0, module version = 2.10.1
[  2133.647] 	Module class: X.Org XInput Driver
[  2133.647] 	ABI class: X.Org XInput driver, version 22.1
[  2133.648] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 16 paused 0
[  2133.648] (II) Using input driver 'evdev' for 'Power Button'
[  2133.648] (**) Power Button: always reports core events
[  2133.648] (**) evdev: Power Button: Device: "/dev/input/event4"
[  2133.648] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2133.648] (--) evdev: Power Button: Found keys
[  2133.648] (II) evdev: Power Button: Configuring as keyboard
[  2133.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[  2133.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2133.648] (**) Option "xkb_rules" "evdev"
[  2133.648] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  2133.648] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2133.649] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 17 paused 0
[  2133.649] (II) Using input driver 'evdev' for 'Video Bus'
[  2133.649] (**) Video Bus: always reports core events
[  2133.649] (**) evdev: Video Bus: Device: "/dev/input/event10"
[  2133.649] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2133.649] (--) evdev: Video Bus: Found keys
[  2133.649] (II) evdev: Video Bus: Configuring as keyboard
[  2133.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13/event10"
[  2133.649] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2133.649] (**) Option "xkb_rules" "evdev"
[  2133.649] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2133.649] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2133.650] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[  2133.650] (II) Using input driver 'evdev' for 'Power Button'
[  2133.650] (**) Power Button: always reports core events
[  2133.650] (**) evdev: Power Button: Device: "/dev/input/event3"
[  2133.650] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2133.650] (--) evdev: Power Button: Found keys
[  2133.650] (II) evdev: Power Button: Configuring as keyboard
[  2133.650] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[  2133.650] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  2133.650] (**) Option "xkb_rules" "evdev"
[  2133.650] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[  2133.650] (II) No input driver specified, ignoring this device.
[  2133.650] (II) This device may have been added with another device file.
[  2133.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[  2133.651] (II) No input driver specified, ignoring this device.
[  2133.651] (II) This device may have been added with another device file.
[  2133.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[  2133.651] (II) No input driver specified, ignoring this device.
[  2133.651] (II) This device may have been added with another device file.
[  2133.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[  2133.651] (II) No input driver specified, ignoring this device.
[  2133.651] (II) This device may have been added with another device file.
[  2133.651] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event0)
[  2133.651] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[  2133.703] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[  2133.703] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[  2133.703] (**) PixArt USB Optical Mouse: always reports core events
[  2133.703] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event0"
[  2133.703] (--) evdev: PixArt USB Optical Mouse: Vendor 0x4ca Product 0x61
[  2133.703] (--) evdev: PixArt USB Optical Mouse: Found 12 mouse buttons
[  2133.703] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[  2133.703] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[  2133.703] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[  2133.703] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[  2133.703] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[  2133.703] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[  2133.703] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2133.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04CA:0061.0005/input/input19/event0"
[  2133.703] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 9)
[  2133.703] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[  2133.703] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[  2133.703] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[  2133.703] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[  2133.703] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[  2133.704] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[  2133.704] (II) No input driver specified, ignoring this device.
[  2133.704] (II) This device may have been added with another device file.
[  2133.704] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[  2133.704] (II) No input driver specified, ignoring this device.
[  2133.704] (II) This device may have been added with another device file.
[  2133.704] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[  2133.704] (II) No input driver specified, ignoring this device.
[  2133.704] (II) This device may have been added with another device file.
[  2133.704] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[  2133.704] (II) No input driver specified, ignoring this device.
[  2133.704] (II) This device may have been added with another device file.
[  2133.705] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[  2133.705] (II) No input driver specified, ignoring this device.
[  2133.705] (II) This device may have been added with another device file.
[  2133.705] (II) config/udev: Adding input device HID 04d9:1203 (/dev/input/event1)
[  2133.705] (**) HID 04d9:1203: Applying InputClass "evdev keyboard catchall"
[  2133.706] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20 paused 0
[  2133.706] (II) Using input driver 'evdev' for 'HID 04d9:1203'
[  2133.706] (**) HID 04d9:1203: always reports core events
[  2133.706] (**) evdev: HID 04d9:1203: Device: "/dev/input/event1"
[  2133.706] (--) evdev: HID 04d9:1203: Vendor 0x4d9 Product 0x1203
[  2133.706] (--) evdev: HID 04d9:1203: Found keys
[  2133.706] (II) evdev: HID 04d9:1203: Configuring as keyboard
[  2133.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:04D9:1203.0002/input/input3/event1"
[  2133.706] (II) XINPUT: Adding extended input device "HID 04d9:1203" (type: KEYBOARD, id 10)
[  2133.706] (**) Option "xkb_rules" "evdev"
[  2133.707] (II) config/udev: Adding input device HID 04d9:1203 (/dev/input/event2)
[  2133.707] (**) HID 04d9:1203: Applying InputClass "evdev keyboard catchall"
[  2133.707] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
[  2133.708] (II) Using input driver 'evdev' for 'HID 04d9:1203'
[  2133.708] (**) HID 04d9:1203: always reports core events
[  2133.708] (**) evdev: HID 04d9:1203: Device: "/dev/input/event2"
[  2133.708] (--) evdev: HID 04d9:1203: Vendor 0x4d9 Product 0x1203
[  2133.708] (--) evdev: HID 04d9:1203: Found keys
[  2133.708] (II) evdev: HID 04d9:1203: Configuring as keyboard
[  2133.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:04D9:1203.0003/input/input4/event2"
[  2133.708] (II) XINPUT: Adding extended input device "HID 04d9:1203" (type: KEYBOARD, id 11)
[  2133.708] (**) Option "xkb_rules" "evdev"
[  2133.708] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[  2133.708] (II) No input driver specified, ignoring this device.
[  2133.708] (II) This device may have been added with another device file.
[  2135.439] (II) intel(1): EDID vendor "SAM", prod id 1398
[  2135.439] (II) intel(1): Using EDID range info for horizontal sync
[  2135.439] (II) intel(1): Using EDID range info for vertical refresh
[  2135.439] (II) intel(1): Printing DDC gathered Modelines:
[  2135.439] (II) intel(1): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  2135.439] (II) intel(1): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2135.439] (II) intel(1): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  2135.439] (II) intel(1): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  2135.439] (II) intel(1): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  2135.439] (II) intel(1): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  2135.439] (II) intel(1): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2135.439] (II) intel(1): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  2135.439] (II) intel(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  2135.439] (II) intel(1): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  2135.439] (II) intel(1): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  2135.439] (II) intel(1): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2135.439] (II) intel(1): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  2135.439] (II) intel(1): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  2135.439] (II) intel(1): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  2135.439] (II) intel(1): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  2135.439] (II) intel(1): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  2135.439] (II) intel(1): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[  2141.963] resize called 1280 1024
[  2142.097] resize called 2560 1024

After startx, I get the two screens on noveau mirrored. However, the other screen connected to motherboard (with VGA) has a black screen a x shaped cursor. It doesn't show up on xrandr either.

Fix for extending monitors driven by noveau

#!/bin/bash
xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
xrandr --addmode DVI-I-1 1280x1024
xrandr --output DVI-I-1 --mode 1280x1024
xrandr --output VGA-2 --mode 1280x1024 --left-of DVI-I-1

In Xorg.0.log

  2133.292] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[  2133.292] (II) intel(1): SNA compiled from 2.99.917-560-gd167280
[  2133.292] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support

This came to notice.

Last edited by Nemu_khao (2016-03-10 13:16:55)

Offline

Board footer

Powered by FluxBB