Cinnamon animations not so smooth as on Linux Mint

marmistrz · 2016-03-19 17:11:31

I was using Linux Mint with Cinnamon for a long time before I switched to Arch. Now I noticed that the animations are less smooth under Arch than under LM.

What can be the cause? I'm using the xf86-video-intel drivers and bumblebee. I can't see any major difference in configuration.

JohnBobSmith · 2016-03-19 17:18:02

Hello,

We will need a bit more info. Can you post the output of inxi -SCG for us? The only thing I can think of is, maybe, video acceleration. For that I believe you will need your drivers/video cards vdpau package.

marmistrz · 2016-03-19 17:50:31

JohnBobSmith wrote:

Hello,
We will need a bit more info. Can you post the output of inxi -SCG for us? The only thing I can think of is, maybe, video acceleration. For that I believe you will need your drivers/video cards vdpau package.

Thanks,

the only vdpau thing I have installed is:

extra/libvdpau 1.1.1-2 [installed]
    Nvidia VDPAU library

my inxi output is

System:    Host: arch Kernel: 4.1.19-1-lts x86_64 (64 bit) Desktop: Cinnamon 2.8.7  Distro: Arch Linux
CPU:       Dual core Intel Core i5-5200U (-HT-MCP-) cache: 3072 KB 
           clock speeds: max: 2700 MHz 1: 2672 MHz 2: 2689 MHz 3: 2663 MHz 4: 2673 MHz
Graphics:  Card-1: Intel Broadwell-U Integrated Graphics
           Card-2: NVIDIA GM108M [GeForce 940M]
           Display Server: X.Org 1.18.1 driver: intel Resolution: 1366x768@60.00hz
           GLX Renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) GLX Version: 3.0 Mesa 11.1.2

JohnBobSmith · 2016-03-19 18:21:41

Ah. The integrated intel graphics are an nvidia card are known to have issues with a great many things, but usually there are workarounds or other hacks. I do not use intel or nvidia, so I cannot help you further in that area. However, do consult the wiki in as many different areas as you can. You might want to look at xorg, cinnamon docs/wiki, bumblebee settings, and perhaps even your window manager settings. You could try turning off and/or disabling as many special/fancy effects as possible, or turning off/on compositing all together to see if it makes a difference.

One important thing to note is that pacman won't pull in optional dependencies as dependencies. I can't think of a good example. but if package Foo depends on Bar and Bar optionally requires Baz for certain features, Baz wont be installed. This reduces bloat significantly, but you may want to query pacman for Cinnamon's dependencies and install anything you think is relevant. Try running pacman -Qi <package> and see if you need anything else for said package.

Hopefully you can get everything running the way you want soon!

marmistrz · 2016-03-19 18:34:34

Well, but it works under Mint.

It really seems I don't have hw acceleration activated. Which of the two Intel package should I install for it: https://wiki.archlinux.org/index.php/VDPAU
Or maybe both?

I have two graphics cards. One is the Intel one, and the other is NVidia. On everyday basis I use the Intel one, and Bumblebee keeps the nvidia turned off.

Last edited by marmistrz (2016-03-19 18:35:40)

ooo · 2016-03-19 21:21:18

Enabling DRI3 for intel could improve performance a little, but it may still cause crashes or other issues, so it definitely shouldn't be enabled on mint.
You could check that you are using SNA AccelMethod from Xorg logs, even though it should already be enabled by default.

marmistrz wrote:

It really seems I don't have hw acceleration activated. Which of the two Intel package should I install for it: https://wiki.archlinux.org/index.php/VDPAU
Or maybe both?

VDPAU (and VA-API) have no effect on animation speed. They are used for accelerated decoding of compressed video files. You'll probably want them installed and set up if you watch a lot of videos on your computer.
To answer your question: if you need both VDPAU and VA-API support, install both. If you only want VA-API, you don't need libvdpau-va-gl.

Last edited by ooo (2016-03-19 21:22:58)

Rasi · 2016-03-20 08:16:38

compare X log of mint and arch

marmistrz · 2016-03-21 21:09:20

Well, it's weird. I install VDPAU, VA-API, restarted the computer and the animations are much more smoother...

marmistrz · 2016-03-23 07:54:34

Ok, the problem disappeared and came back... I rebooted the computer, the animations were all fine. I suspended a couple of times - everything ok. I left the computer to suspend for the whole night, after the wakeup the animations lag again... Before the whole-night suspend - they were ok.

Any idea why?

/edit: logging out and in brings the animatios smooth back again

Last edited by marmistrz (2016-03-23 08:03:04)

Lone_Wolf · 2016-03-23 10:24:28

Sounds a bit like a memory leak OR a suspension issue (or maybe both) .

If you keep the computer running a long time ( like overnight ) , do things slowdown also ?

clfarron4 · 2016-03-23 15:46:27

IIRC, Ubuntu uses nvidia-prime for this where we use bumblebee. Shouldn't make a difference, but just putting it out there.

marmistrz · 2016-03-23 16:21:57

Well, I guess I'd have to leave it for a very long time. I left my computer suspended for 8 hours today, and after wakeup everything ok.

I'm using bumblebee on Mint too.

marmistrz · 2016-03-26 18:10:53

Might've found the culprit...

[   881.655] (**) Option "xkb_rules" "evdev"
[   881.655] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[   881.655] (WW) evdev: Microsoft Microsoft® Nano Transceiver v1.0: ignoring absolute axes.
[   881.655] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[   881.655] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[   881.655] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[   881.655] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
[   881.714] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event2)
[   881.714] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev pointer catchall"
[   881.714] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[   881.714] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[   881.714] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event2"
[   881.770] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x7b2
[   881.770] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found 9 mouse buttons
[   881.770] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found scroll wheel(s)
[   881.770] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found relative axes
[   881.770] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found x and y relative axes
[   881.770] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as mouse
[   881.770] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Adding scrollwheel support
[   881.770] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: YAxisMapping: buttons 4 and 5
[   881.770] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   881.770] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:07B2.0005/input/input25/event2"
[   881.770] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: MOUSE, id 16)
[   881.770] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[   881.770] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[   881.770] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[   881.770] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[   881.770] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
(EE) [mi] EQ overflowing.  Additional events will be discarded until existing events are processed.
(EE) 
(EE) Backtrace:
(EE) 0: ? (?+0x0) [0x4047800000575ea0]
(EE) 1: ? (?+0x0) [0x404780000044ec00]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (_init+0x3153) [0x7f6f2c113f83]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (_init+0x39bd) [0x7f6f2c1153bd]
(EE) 4: /usr/lib/xorg-server/Xorg (?+0x39bd) [0x47a0ad]
(EE) 5: /usr/lib/xorg-server/Xorg (?+0x39bd) [0x4a362d]
(EE) 6: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f6f337be32f]
(EE) 7: /usr/lib/libc.so.6 (ioctl+0x5) [0x7f6f3386b275]
(EE) 8: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e55ca05]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58ad15]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58b275]
(EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58b685]
(EE) 12: /usr/lib/xorg-server/Xorg (?+0x5) [0x51f5f5]
(EE) 13: /usr/lib/xorg-server/Xorg (?+0x5) [0x432ca5]
(EE) 14: /usr/lib/xorg-server/Xorg (?+0x5) [0x436015]
(EE) 15: /usr/lib/xorg-server/Xorg (?+0x5) [0x439ec5]
(EE) 16: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f6f337ab710]
(EE) 17: /usr/lib/xorg-server/Xorg (?+0xf0) [0x424710]
(EE) 18: ? (?+0xf0) [0xf0]
(EE) 
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause.  It is a victim.
[  9044.973] [mi] Increasing EQ size to 1024 to prevent dropped events.
[  9044.973] [mi] EQ processing has resumed after 85 dropped events.
[  9044.973] [mi] This may be caused by a misbehaving driver monopolizing the server's resources.
(EE) [mi] EQ overflowing.  Additional events will be discarded until existing events are processed.
(EE) 
(EE) Backtrace:
(EE) 0: ? (?+0x0) [0x4087100000575ea0]
(EE) 1: ? (?+0x0) [0x408710000044ec00]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (_init+0x3153) [0x7f6f2c113f83]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (_init+0x39bd) [0x7f6f2c1153bd]
(EE) 4: /usr/lib/xorg-server/Xorg (?+0x39bd) [0x47a0ad]
(EE) 5: /usr/lib/xorg-server/Xorg (?+0x39bd) [0x4a362d]
(EE) 6: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f6f337be32f]
(EE) 7: /usr/lib/libc.so.6 (ioctl+0x5) [0x7f6f3386b275]
(EE) 8: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e55ca05]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58ad15]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58b275]
(EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so (?+0x5) [0x7f6f2e58b685]
(EE) 12: /usr/lib/xorg-server/Xorg (?+0x5) [0x51f5f5]
(EE) 13: /usr/lib/xorg-server/Xorg (?+0x5) [0x4d63b5]
(EE) 14: /usr/lib/xorg-server/Xorg (?+0x5) [0x4d7c35]
(EE) 15: /usr/lib/xorg-server/Xorg (?+0x5) [0x436015]
(EE) 16: /usr/lib/xorg-server/Xorg (?+0x5) [0x439ec5]
(EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f6f337ab710]
(EE) 18: /usr/lib/xorg-server/Xorg (?+0xf0) [0x424710]
(EE) 19: ? (?+0xf0) [0xf0]
(EE) 
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause.  It is a victim.
[ 13492.003] [mi] Increasing EQ size to 2048 to prevent dropped events.
[ 13492.004] [mi] EQ processing has resumed after 9 dropped events.
[ 13492.004] [mi] This may be caused by a misbehaving driver monopolizing the server's resources.
[ 13492.012] (EE) intel(0): Failed to submit rendering commands (Input/output error), disabling acceleration.
[ 13492.013] (EE) intel(0): When reporting this, please include /sys/class/drm/card0/error and the full dmesg.

and the dmesg here:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.20-1-lts (builduser@andyrtr) (gcc version 5.3.0 (GCC) ) #1 SMP Fri Mar 18 17:26:44 CET 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/sda5
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6949fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c694a000-0x00000000c6c9bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c6c9c000-0x00000000caa88fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caa89000-0x00000000caae7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caae8000-0x00000000cafe9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cafea000-0x00000000cc46dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cc46e000-0x00000000cceeafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cceeb000-0x00000000ccffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd800000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0xcb3ee000  ACPI 2.0=0xcb3ee000  SMBIOS=0xf05b0  MPS=0xfd700 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X555LB/X555LB, BIOS X555LB.204 01/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FC0000000 write-back
[    0.000000]   2 base 00C0000000 mask 7FF8000000 write-back
[    0.000000]   3 base 00C8000000 mask 7FFC000000 write-back
[    0.000000]   4 base 00CC000000 mask 7FFF000000 write-back
[    0.000000]   5 base 0100000000 mask 7F00000000 write-back
[    0.000000]   6 base 0200000000 mask 7FC0000000 write-back
[    0.000000]   7 base 0230000000 mask 7FF0000000 uncachable
[    0.000000]   8 base 022F000000 mask 7FFF000000 uncachable
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8800000fd940]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[    0.000000]  [mem 0x22ee00000-0x22effffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x220000000-0x22edfffff]
[    0.000000]  [mem 0x220000000-0x22edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[    0.000000]  [mem 0x200000000-0x21fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xc6949fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xc67fffff] page 2M
[    0.000000]  [mem 0xc6800000-0xc6949fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xc6c9c000-0xcaa88fff]
[    0.000000]  [mem 0xc6c9c000-0xc6dfffff] page 4k
[    0.000000]  [mem 0xc6e00000-0xca9fffff] page 2M
[    0.000000]  [mem 0xcaa00000-0xcaa88fff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcaae8000-0xcafe9fff]
[    0.000000]  [mem 0xcaae8000-0xcabfffff] page 4k
[    0.000000]  [mem 0xcac00000-0xcadfffff] page 2M
[    0.000000]  [mem 0xcae00000-0xcafe9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[    0.000000]  [mem 0xccfff000-0xccffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x37906000-0x37c7afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000CB3EE000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000CB3EE0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CB4063F8 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CB3EE228 0181CA (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000CC46BF80 000040
[    0.000000] ACPI: APIC 0x00000000CB406508 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CB406590 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000CB4065D8 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000CB406678 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x00000000CB406740 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CB406780 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CB4067B8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000CB406AD0 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000CB406B18 000194 (v01 Intel  zpodd    00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB406CB0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: ASF! 0x00000000CB407930 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 0x00000000CB4079D0 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB407F10 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB408A88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB40BCD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[    0.000000] ACPI: PCCT 0x00000000CB40C068 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB40C0D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB40CBA0 006622 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000CB4131C8 000627 (v02 SgRef  SgPch    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x00000000CB4137F0 0000A8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x00000000CB413898 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CB4138D0 000E83 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22eff8000-0x22effbfff]
[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c6949fff]
[    0.000000]   node   0: [mem 0x00000000c6c9c000-0x00000000caa88fff]
[    0.000000]   node   0: [mem 0x00000000caae8000-0x00000000cafe9fff]
[    0.000000]   node   0: [mem 0x00000000ccfff000-0x00000000ccffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[    0.000000] On node 0 totalpages: 2071511
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12913 pages used for memmap
[    0.000000]   DMA32 zone: 826426 pages, LIFO batch:31
[    0.000000]   Normal zone: 19392 pages used for memmap
[    0.000000]   Normal zone: 1241088 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x0])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x24])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x0])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0x85])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc694a000-0xc6c9bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaa89000-0xcaae7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcafea000-0xcc46dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc46e000-0xcceeafff]
[    0.000000] PM: Registered nosave memory: [mem 0xcceeb000-0xccffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcd7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd800000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88022ec00000 s95128 r8192 d31848 u524288
[    0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2039117
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/sda5
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8018208K/8286044K available (5682K kernel code, 898K rwdata, 1740K rodata, 1188K init, 1152K bss, 267836K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:728 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2196.585 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.17 BogoMIPS (lpj=21965850)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20150410
[    0.029904] ACPI: All ACPI Tables successfully acquired
[    0.031718] Security Framework initialized
[    0.031722] Yama: becoming mindful.
[    0.032169] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033571] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034181] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034190] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034365] Initializing cgroup subsys blkio
[    0.034367] Initializing cgroup subsys memory
[    0.034373] Initializing cgroup subsys devices
[    0.034375] Initializing cgroup subsys freezer
[    0.034376] Initializing cgroup subsys net_cls
[    0.034397] CPU: Physical Processor ID: 0
[    0.034397] CPU: Processor Core ID: 0
[    0.034401] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.034402] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.035388] mce: CPU supports 7 MCE banks
[    0.035398] CPU0: Thermal monitoring enabled (TM1)
[    0.035406] process: using mwait in idle threads
[    0.035409] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.035409] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.035712] Freeing SMP alternatives memory: 20K (ffffffff81a0b000 - ffffffff81a10000)
[    0.038442] ftrace: allocating 21660 entries in 85 pages
[    0.046704] dmar: Host address width 39
[    0.046706] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.046714] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.046716] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.046720] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.046721] dmar: RMRR base: 0x000000cce44000 end: 0x000000cce52fff
[    0.046722] dmar: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[    0.046724] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.046725] HPET id 0 under DRHD base 0xfed91000
[    0.047035] x2apic is disabled because BIOS sets x2apic opt out bit. You can use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.047045] Enabled IRQ remapping in xapic mode
[    0.047046] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.047665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.147638] TSC deadline timer enabled
[    0.147640] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (fam: 06, model: 3d, stepping: 04)
[    0.147662] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[    0.147680] ... version:                3
[    0.147680] ... bit width:              48
[    0.147681] ... generic registers:      4
[    0.147682] ... value mask:             0000ffffffffffff
[    0.147683] ... max period:             0000ffffffffffff
[    0.147683] ... fixed-purpose events:   3
[    0.147684] ... event mask:             000000070000000f
[    0.148121] x86: Booting SMP configuration:
[    0.148123] .... node  #0, CPUs:      #1 #2 #3
[    0.190894] x86: Booted up 1 node, 4 CPUs
[    0.190896] smpboot: Total of 4 processors activated (17572.68 BogoMIPS)
[    0.194186] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.194387] devtmpfs: initialized
[    0.196209] PM: Registering ACPI NVS region [mem 0xcafea000-0xcc46dfff] (21512192 bytes)
[    0.196473] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196540] pinctrl core: initialized pinctrl subsystem
[    0.196575] RTC time: 16:25:33, date: 03/25/16
[    0.196677] NET: Registered protocol family 16
[    0.217673] cpuidle: using governor ladder
[    0.244166] cpuidle: using governor menu
[    0.244200] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.244202] ACPI: bus type PCI registered
[    0.244203] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.244275] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.244278] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.244357] PCI: Using configuration type 1 for base access
[    0.274456] ACPI: Added _OSI(Module Device)
[    0.274458] ACPI: Added _OSI(Processor Device)
[    0.274459] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.274460] ACPI: Added _OSI(Processor Aggregator Device)
[    0.277360] ACPI : EC: EC description table is found, configuring boot EC
[    0.277371] ACPI : EC: EC started
[    0.280318] ACPI: Executed 9 blocks of module-level executable AML code
[    0.287214] ACPI: Dynamic OEM Table Load:
[    0.287220] ACPI: SSDT 0xFFFF880224F55400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.288123] ACPI: Dynamic OEM Table Load:
[    0.288129] ACPI: SSDT 0xFFFF8802252F2000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.289073] ACPI: Dynamic OEM Table Load:
[    0.289077] ACPI: SSDT 0xFFFF880224F41E00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.290700] ACPI: Interpreter enabled
[    0.290709] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.290717] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.290730] ACPI: (supports S0 S3 S4 S5)
[    0.290732] ACPI: Using IOAPIC for interrupt routing
[    0.290759] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.292973] ACPI: Power Resource [PG00] (on)
[    0.293318] ACPI: Power Resource [PG01] (on)
[    0.293658] ACPI: Power Resource [PG02] (on)
[    0.295891] ACPI: Power Resource [PC05] (on)
[    0.302185] ACPI: Power Resource [FN00] (off)
[    0.302247] ACPI: Power Resource [FN01] (off)
[    0.302304] ACPI: Power Resource [FN02] (off)
[    0.302361] ACPI: Power Resource [FN03] (off)
[    0.302417] ACPI: Power Resource [FN04] (off)
[    0.303278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.303284] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.303737] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.303739] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.304148] PCI host bridge to bus 0000:00
[    0.304150] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.304152] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.304153] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.304155] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.304156] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[    0.304162] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.304244] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.304253] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf5ffffff 64bit]
[    0.304258] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.304262] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.304339] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.304346] pci 0000:00:03.0: reg 0x10: [mem 0xf731c000-0xf731ffff 64bit]
[    0.304429] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.304438] pci 0000:00:04.0: reg 0x10: [mem 0xf7310000-0xf7317fff 64bit]
[    0.304536] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.304550] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[    0.304598] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.304645] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.304675] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.304692] pci 0000:00:16.0: reg 0x10: [mem 0xf7324000-0xf732401f 64bit]
[    0.304749] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.304833] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.304847] pci 0000:00:1b.0: reg 0x10: [mem 0xf7318000-0xf731bfff 64bit]
[    0.304895] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.304948] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.304979] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.305028] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.305094] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.305123] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.305174] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.305237] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.305266] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.305317] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.305379] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.305408] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.305460] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.305522] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.305558] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.305716] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.305727] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.305733] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.305739] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.305745] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.305751] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.305756] pci 0000:00:1f.2: reg 0x24: [mem 0xf7322000-0xf73227ff]
[    0.305783] pci 0000:00:1f.2: PME# supported from D3hot
[    0.305846] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.305857] pci 0000:00:1f.3: reg 0x10: [mem 0xf7321000-0xf73210ff 64bit]
[    0.305874] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.305956] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.305983] pci 0000:00:1f.6: reg 0x10: [mem 0xf7320000-0xf7320fff 64bit]
[    0.306177] acpiphp: Slot [1] registered
[    0.306181] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.306248] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.306266] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.306291] pci 0000:02:00.0: reg 0x18: [mem 0xf7204000-0xf7204fff 64bit]
[    0.306308] pci 0000:02:00.0: reg 0x20: [mem 0xf7200000-0xf7203fff 64bit]
[    0.306385] pci 0000:02:00.0: supports D1 D2
[    0.306386] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.326646] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.326649] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.326652] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.326732] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[    0.326769] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff 64bit]
[    0.326847] pci 0000:03:00.0: reg 0x30: [mem 0xf7180000-0xf718ffff pref]
[    0.326941] pci 0000:03:00.0: supports D1 D2
[    0.326943] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.346648] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.346653] pci 0000:00:1c.3:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.346711] pci 0000:04:00.0: [10de:1347] type 00 class 0x030200
[    0.346726] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.346739] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.346752] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.346761] pci 0000:04:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.346770] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.346866] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.366643] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.366646] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.366649] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.366653] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.367544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.367592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.367630] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    0.367666] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[    0.367706] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.367744] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.367780] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.367816] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.368228] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.368293] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.368380] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.368381] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.368384] vgaarb: loaded
[    0.368385] vgaarb: bridge control possible 0000:00:02.0
[    0.368482] PCI: Using ACPI for IRQ routing
[    0.369639] PCI: pci_cache_line_size set to 64 bytes
[    0.369682] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.369683] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.369684] e820: reserve RAM buffer [mem 0xc694a000-0xc7ffffff]
[    0.369685] e820: reserve RAM buffer [mem 0xcaa89000-0xcbffffff]
[    0.369686] e820: reserve RAM buffer [mem 0xcafea000-0xcbffffff]
[    0.369687] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[    0.369688] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[    0.369782] NetLabel: Initializing
[    0.369783] NetLabel:  domain hash size = 128
[    0.369784] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.369793] NetLabel:  unlabeled traffic allowed by default
[    0.369811] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.369815] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.371837] Switched to clocksource hpet
[    0.376074] pnp: PnP ACPI init
[    0.376230] system 00:00: [io  0x0240-0x0259] has been reserved
[    0.376233] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.376304] pnp 00:01: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.376340] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.376413] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.376415] system 00:03: [io  0xffff] has been reserved
[    0.376416] system 00:03: [io  0xffff] has been reserved
[    0.376418] system 00:03: [io  0xffff] has been reserved
[    0.376419] system 00:03: [io  0x1800-0x18fe] could not be reserved
[    0.376421] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.376423] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.376461] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.376491] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.376493] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.376625] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.376627] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.376628] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.376630] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.376631] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.376632] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.376634] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.376635] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.376637] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.376638] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.376640] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.376641] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[    0.376643] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.377009] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.377485] pnp: PnP ACPI: found 8 devices
[    0.383356] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.383385] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.383393] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.383396] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.383399] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.383405] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.383408] pci 0000:00:1c.3:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.383414] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.383416] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.383420] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.383422] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.383428] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.383429] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.383431] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.383432] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff window]
[    0.383434] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.383435] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.383436] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.383438] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.383439] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.383440] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.383467] NET: Registered protocol family 2
[    0.383613] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.383729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.383836] TCP: Hash tables configured (established 65536 bind 65536)
[    0.383860] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.383883] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.383928] NET: Registered protocol family 1
[    0.383939] pci 0000:00:02.0: Video device with shadowed ROM
[    0.384132] PCI: CLS 64 bytes, default 64
[    0.384168] Unpacking initramfs...
[    0.437018] Freeing initrd memory: 3540K (ffff880037906000 - ffff880037c7b000)
[    0.437039] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.437041] software IO TLB [mem 0xc1b10000-0xc5b10000] (64MB) mapped at [ffff8800c1b10000-ffff8800c5b0ffff]
[    0.437081] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.437082] hw unit of domain pp0-core 2^-14 Joules
[    0.437083] hw unit of domain package 2^-14 Joules
[    0.437084] hw unit of domain dram 2^-14 Joules
[    0.437085] hw unit of domain pp1-gpu 2^-14 Joules
[    0.437145] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x13
[    0.437149] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x13
[    0.437154] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x13
[    0.437160] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x13
[    0.437195] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.437220] Scanning for low memory corruption every 60 seconds
[    0.437430] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.437444] Initialise system trusted keyring
[    0.437707] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.438846] zpool: loaded
[    0.438848] zbud: loaded
[    0.438973] VFS: Disk quotas dquot_6.6.0
[    0.438999] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.439115] Key type big_key registered
[    0.439260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.439286] io scheduler noop registered
[    0.439289] io scheduler deadline registered (default)
[    0.439314] io scheduler cfq registered
[    0.439874] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.439877] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.439888] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.439890] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.439892] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.439902] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.439904] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.439906] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.439916] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.439917] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.439919] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.439924] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.439935] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.439951] efifb: probing for efifb
[    0.439965] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[    0.439966] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.439967] efifb: scrolling: redraw
[    0.439968] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.441567] Console: switching to colour frame buffer device 128x48
[    0.443124] fb0: EFI VGA frame buffer device
[    0.443131] intel_idle: MWAIT substates: 0x11142120
[    0.443133] intel_idle: v0.4 model 0x3D
[    0.443133] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.443334] GHES: HEST is not enabled!
[    0.443385] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.443736] Linux agpgart interface v0.103
[    0.443971] rtc_cmos 00:04: RTC can wake from S4
[    0.444082] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.444107] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.444117] Intel P-state driver initializing.
[    0.444231] ledtrig-cpu: registered to indicate activity on CPUs
[    0.444901] NET: Registered protocol family 10
[    0.445288] NET: Registered protocol family 17
[    0.446086] Loading compiled-in X.509 certificates
[    0.446122] registered taskstats version 1
[    0.447221]   Magic number: 8:930:439
[    0.447228]   hash matches drivers/base/power/main.c:814
[    0.447263] pcieport 0000:00:1c.0: hash matches
[    0.447374] rtc_cmos 00:04: setting system clock to 2016-03-25 16:25:33 UTC (1458923133)
[    0.447571] PM: Hibernation image not present or could not be loaded.
[    0.448206] Freeing unused kernel memory: 1188K (ffffffff818e2000 - ffffffff81a0b000)
[    0.448209] Write protecting the kernel read-only data: 8192k
[    0.448735] Freeing unused kernel memory: 452K (ffff88000158f000 - ffff880001600000)
[    0.448937] Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000)
[    0.456582] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.482569] sdhci: Secure Digital Host Controller Interface driver
[    0.482571] sdhci: Copyright(c) Pierre Ossman
[    0.485066] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.487613] i8042: Detected active multiplexing controller, rev 1.1
[    0.489535] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.489540] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.489542] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.489544] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.489546] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.492664] ACPI: bus type USB registered
[    0.492684] usbcore: registered new interface driver usbfs
[    0.492691] usbcore: registered new interface driver hub
[    0.492708] usbcore: registered new device driver usb
[    0.494342] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.494349] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.494428] SCSI subsystem initialized
[    0.495421] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.495427] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.495879] hub 1-0:1.0: USB hub found
[    0.495944] hub 1-0:1.0: 11 ports detected
[    0.496109] libata version 3.00 loaded.
[    0.499625] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.499629] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.499793] hub 2-0:1.0: USB hub found
[    0.499803] hub 2-0:1.0: 4 ports detected
[    0.501261] ahci 0000:00:1f.2: version 3.0
[    0.501444] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    0.501448] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.502273] scsi host0: ahci
[    0.502486] scsi host1: ahci
[    0.502589] scsi host2: ahci
[    0.502682] scsi host3: ahci
[    0.502742] ata1: SATA max UDMA/133 abar m2048@0xf7322000 port 0xf7322100 irq 47
[    0.502744] ata2: SATA max UDMA/133 abar m2048@0xf7322000 port 0xf7322180 irq 47
[    0.502746] ata3: DUMMY
[    0.502747] ata4: DUMMY
[    0.547442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.711909] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    0.734792] usb-storage 2-2:1.0: USB Mass Storage device detected
[    0.734932] scsi host4: usb-storage 2-2:1.0
[    0.735231] usbcore: registered new interface driver usb-storage
[    0.811725] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    0.851769] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.851787] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.852094] ata1.00: ATA-8: LITEONIT LCS-128M6S, DC77101, max UDMA/133
[    0.852097] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.852533] ata1.00: configured for UDMA/133
[    0.852668] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LCS-128 101  PQ: 0 ANSI: 5
[    0.855293] ata2.00: ATAPI: SlimtypeDVD A  DA8A6SH, GAA1, max UDMA/133
[    0.856542] ata2.00: configured for UDMA/133
[    0.858127] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DA8A6SH   GAA1 PQ: 0 ANSI: 5
[    0.867669] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.867729] sd 0:0:0:0: [sda] Write Protect is off
[    0.867733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.867752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.869275]  sda: sda1 sda2 sda3 sda4 sda5
[    0.869574] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.886596] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.886600] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.886751] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.968375] hidraw: raw HID events driver (C) Jiri Kosina
[    0.979511] usbcore: registered new interface driver usbhid
[    0.979514] usbhid: USB HID core driver
[    0.980116] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07B2.0001/input/input5
[    1.031784] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input0
[    1.031988] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:07B2.0002/input/input6
[    1.032022] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input1
[    1.041506] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:045E:07B2.0003/input/input7
[    1.091812] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input2
[    1.115009] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    1.151639] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.164796] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.170307] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.170411] systemd[1]: Detected architecture x86-64.
[    1.171230] systemd[1]: Set hostname to <arch>.
[    1.219447] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.219573] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.219789] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.219881] systemd[1]: Listening on udev Kernel Socket.
[    1.219952] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.220033] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.220274] systemd[1]: Created slice System Slice.
[    1.220378] systemd[1]: Created slice system-getty.slice.
[    1.220471] systemd[1]: Created slice User and Session Slice.
[    1.220521] systemd[1]: Reached target Slices.
[    1.220564] systemd[1]: Reached target Remote File Systems.
[    1.220626] systemd[1]: Listening on udev Control Socket.
[    1.220696] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.220750] systemd[1]: Reached target Paths.
[    1.220791] systemd[1]: Reached target Encrypted Volumes.
[    1.220850] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.220912] systemd[1]: Listening on Journal Socket.
[    1.221896] systemd[1]: Mounting Temporary Directory...
[    1.222284] systemd[1]: Starting File System Check on Root Device...
[    1.222782] systemd[1]: Mounting Huge Pages File System...
[    1.223753] systemd[1]: Starting Set Up Additional Binary Formats...
[    1.224161] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.224659] systemd[1]: Mounting POSIX Message Queue File System...
[    1.225055] systemd[1]: Starting Setup Virtual Console...
[    1.226785] systemd[1]: Starting Load Kernel Modules...
[    1.227320] systemd[1]: Mounting Debug File System...
[    1.228706] systemd[1]: Listening on Process Core Dump Socket.
[    1.233353] systemd[1]: Starting Journal Service...
[    1.234340] systemd[1]: Mounted POSIX Message Queue File System.
[    1.234409] systemd[1]: Mounted Huge Pages File System.
[    1.234458] systemd[1]: Mounted Debug File System.
[    1.235015] systemd[1]: Mounted Temporary Directory.
[    1.235793] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.236531] systemd[1]: Started Setup Virtual Console.
[    1.237210] systemd[1]: Started Load Kernel Modules.
[    1.238802] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 148 (systemd-binfmt)
[    1.246960] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    1.247900] systemd[1]: Starting Apply Kernel Variables...
[    1.249002] systemd[1]: Mounting Configuration File System...
[    1.251139] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    1.251842] systemd[1]: Mounted Configuration File System.
[    1.252594] systemd[1]: Started File System Check on Root Device.
[    1.253394] systemd[1]: Started Apply Kernel Variables.
[    1.255158] systemd[1]: Started Set Up Additional Binary Formats.
[    1.261380] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.263689] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    1.264283] systemd[1]: Started Remount Root and Kernel File Systems.
[    1.265895] systemd[1]: Started Journal Service.
[    1.278209] systemd-journald[167]: Received request to flush runtime journal from PID 1
[    1.357453] ACPI: AC Adapter [AC0] (off-line)
[    1.362910] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[    1.363778] ACPI: Lid Switch [LID]
[    1.363841] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[    1.363845] ACPI: Sleep Button [SLPB]
[    1.363947] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[    1.363950] ACPI: Power Button [PWRF]
[    1.388869] ACPI: Battery Slot [BAT0] (battery present)
[    1.389065] wmi: Mapper loaded
[    1.395995] thermal LNXTHERM:00: registered as thermal_zone1
[    1.395998] ACPI: Thermal Zone [THRM] (37 C)
[    1.396303] thermal LNXTHERM:01: registered as thermal_zone2
[    1.396305] ACPI: Thermal Zone [TZ00] (28 C)
[    1.396476] thermal LNXTHERM:02: registered as thermal_zone3
[    1.396477] ACPI: Thermal Zone [TZ01] (30 C)
[    1.431572] tsc: Refined TSC clocksource calibration: 2196.822 MHz
[    1.431576] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1faa78c2223, max_idle_ns: 440795236012 ns
[    1.435273] random: nonblocking pool is initialized
[    1.451884] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.473774] Adding 4194300k swap on /dev/sda4.  Priority:-1 extents:1 across:4194300k SSFS
[    1.533997] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    1.539036] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.539046] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.543646] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150410/utaddress-254)
[    1.543652] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[    1.543656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.544602] [drm] Initialized drm 1.1.0 20060810
[    1.551473] bbswitch: version 0.8
[    1.551479] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    1.551485] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
[    1.551493] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[    1.551610] bbswitch: detected an Optimus _DSM function
[    1.551683] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
[    1.553040] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000ca0000, 1c:b7:2c:0c:e6:7d, XID 10900800 IRQ 50
[    1.553045] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.561815] bbswitch: disabling discrete graphics
[    1.561826] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[    1.569195] cfg80211: Calling CRDA to update world regulatory domain
[    1.571191] AVX2 version of gcm_enc/dec engaged.
[    1.571194] AES CTR mode by8 optimization enabled
[    1.577481] [drm] Memory usable by graphics device = 4096M
[    1.577485] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.577487] fb: switching to inteldrmfb from EFI VGA
[    1.577509] Console: switching to colour dummy device 80x25
[    1.579369] [drm] Replacing VGA console driver
[    1.598637] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    1.598642] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.598645] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    1.598647] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    1.598649] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    1.598651] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1b
[    1.612224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.612227] [drm] Driver supports precise vblank timestamp query.
[    1.612334] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.633204] ath: phy0: WB335 1-ANT card detected
[    1.633208] ath: phy0: Set BT/WLAN RX diversity capability
[    1.642003] ath: phy0: Enable LNA combining
[    1.643250] ath: phy0: ASPM enabled: 0x43
[    1.643252] ath: EEPROM regdomain: 0x6a
[    1.643254] ath: EEPROM indicates we should expect a direct regpair map
[    1.643257] ath: Country alpha2 being used: 00
[    1.643258] ath: Regpair used: 0x6a
[    1.648179] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    1.657075] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.660872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[    1.665355] fbcon: inteldrmfb (fb0) is primary device
[    1.665531] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150410/video-1281)
[    1.665532] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.665588] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:01/input/input18
[    1.665743] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    1.665749] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    1.677356] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    1.677807] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90001500000, irq=19
[    1.688207] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15
[    1.731830] scsi 4:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[    1.732225] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.732586] sd 4:0:0:0: [sdb] Write Protect is off
[    1.732589] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    1.732813] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733831]  sdb: sdb1 sdb2
[    1.733865] iTCO_vendor_support: vendor-support=0
[    1.734593] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.734640] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    1.734750] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.735456] asus_wmi: ASUS WMI generic driver loaded
[    1.735553] intel_rapl: Found RAPL domain package
[    1.735554] intel_rapl: Found RAPL domain core
[    1.735557] intel_rapl: Found RAPL domain dram
[    1.735601] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.736202] asus_wmi: Initialization: 0x1
[    1.736231] asus_wmi: BIOS WMI version: 7.9
[    1.736269] asus_wmi: SFUN value: 0xa0077
[    1.737077] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input19
[    1.738240] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.742239] Non-volatile memory driver v1.3
[    1.745564] asus_wmi: Backlight controlled by ACPI video driver
[    1.775801] mousedev: PS/2 mouse device common for all mice
[    1.781949] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    1.822034] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    1.843606] r8169 0000:02:00.0 enp2s0: link down
[    1.843650] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    1.845742] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    1.858305] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    1.858845] ahci 0000:00:1f.2: port does not support device sleep
[    1.960511] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    1.961517] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[    2.221576] usb 1-8: new high-speed USB device number 5 using xhci_hcd
[    2.431752] Switched to clocksource tsc
[    2.461434] usbcore: registered new interface driver uas
[    2.830515] Console: switching to colour frame buffer device 170x48
[    2.833509] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.833510] i915 0000:00:02.0: registered panic notifier
[    2.873044] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[    2.885613] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[    2.887513] wlp3s0: authenticated
[    2.887679] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[    2.887682] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[    2.891488] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[    2.894803] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=5)
[    2.894916] wlp3s0: associated
[    2.894970] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[    2.896977] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    2.897061] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[    2.897132] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[    3.397285] media: Linux media interface: v0.10
[    3.402044] Linux video capture interface: v2.00
[    3.402284] usbcore: registered new interface driver rtsx_usb
[    3.408556] Bluetooth: Core ver 2.20
[    3.408573] NET: Registered protocol family 31
[    3.408575] Bluetooth: HCI device and connection manager initialized
[    3.408579] Bluetooth: HCI socket layer initialized
[    3.408582] Bluetooth: L2CAP socket layer initialized
[    3.408587] Bluetooth: SCO socket layer initialized
[    3.416172] usbcore: registered new interface driver btusb
[    3.418797] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b483)
[    3.422023] fuse init (API version 7.23)
[    3.458394] usb 1-6: USB disconnect, device number 4
[    3.458437] usbcore: registered new interface driver ath3k
[    3.461696] input: USB2.0 VGA UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23
[    3.461817] usbcore: registered new interface driver uvcvideo
[    3.461820] USB Video Class driver (1.1.1)
[    3.771500] usb 1-6: new full-speed USB device number 6 using xhci_hcd
[    4.721558] cfg80211: Calling CRDA to update world regulatory domain
[    7.881476] cfg80211: Calling CRDA to update world regulatory domain
[   11.041520] cfg80211: Calling CRDA to update world regulatory domain
[   14.201584] cfg80211: Calling CRDA to update world regulatory domain
[   17.361614] cfg80211: Calling CRDA to update world regulatory domain
[   20.521639] cfg80211: Calling CRDA to update world regulatory domain
[   23.681678] cfg80211: Calling CRDA to update world regulatory domain
[   26.841681] cfg80211: Calling CRDA to update world regulatory domain
[   30.001691] cfg80211: Calling CRDA to update world regulatory domain
[   33.171722] cfg80211: Calling CRDA to update world regulatory domain
[   34.970873] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   36.331796] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[  195.254964] asus_wmi: Unknown key cf pressed
[  195.398639] ahci 0000:00:1f.2: port does not support device sleep
[  518.908340] usb 1-1: new high-speed USB device number 7 using xhci_hcd
[  519.049538] usb-storage 1-1:1.0: USB Mass Storage device detected
[  519.049606] scsi host5: usb-storage 1-1:1.0
[  519.768748] usb 1-1: USB disconnect, device number 7
[  523.538312] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[  523.678665] usb 1-1: unable to get BOS descriptor
[  523.979966] usb 1-1: USB disconnect, device number 8
[  524.878308] usb 1-1: new high-speed USB device number 9 using xhci_hcd
[  525.712482] NET: Registered protocol family 35
[  525.728389] cdc_phonet: probe of 1-1:1.1 failed with error -16
[  525.728425] usbcore: registered new interface driver cdc_phonet
[  525.832090] usb 1-1: USB disconnect, device number 9
[  529.188289] usb 1-1: new high-speed USB device number 10 using xhci_hcd
[  539.124518] usb 1-1: USB disconnect, device number 10
[  544.124463] usb 1-1: new high-speed USB device number 11 using xhci_hcd
[  557.797519] usb 1-1: USB disconnect, device number 11
[  564.478904] usb 1-3: USB disconnect, device number 2
[  567.276050] usb 1-3: new high-speed USB device number 12 using xhci_hcd
[  582.103346] usb 1-3: USB disconnect, device number 12
[  620.189158] usb 1-3: new high-speed USB device number 13 using xhci_hcd
[  620.329471] usb 1-3: unable to get BOS descriptor
[  620.630683] usb 1-3: USB disconnect, device number 13
[  621.528772] usb 1-3: new high-speed USB device number 14 using xhci_hcd
[  623.197588] usb 1-3: USB disconnect, device number 14
[  629.916415] usb 1-3: new high-speed USB device number 15 using xhci_hcd
[  630.059387] usb-storage 1-3:1.0: USB Mass Storage device detected
[  630.059492] scsi host6: usb-storage 1-3:1.0
[  631.066671] scsi 6:0:0:0: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[  631.066930] scsi 6:0:0:1: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[  631.070828] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[  631.073550] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[  683.557855] usbcore: deregistering interface driver cdc_phonet
[  683.639904] NET: Unregistered protocol family 35
[  692.354384] usb 1-3: USB disconnect, device number 15
[  695.075668] usb 1-3: new high-speed USB device number 16 using xhci_hcd
[  695.218204] usb-storage 1-3:1.0: USB Mass Storage device detected
[  695.218289] scsi host7: usb-storage 1-3:1.0
[  696.215741] scsi 7:0:0:0: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[  696.215881] scsi 7:0:0:1: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[  696.219789] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[  696.220790] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[  699.314473] usb 1-3: USB disconnect, device number 16
[  720.526949] usb 1-3: new high-speed USB device number 17 using xhci_hcd
[  720.667241] usb 1-3: unable to get BOS descriptor
[  720.968507] usb 1-3: USB disconnect, device number 17
[  721.866518] usb 1-3: new high-speed USB device number 18 using xhci_hcd
[  722.647332] NET: Registered protocol family 35
[  722.665991] cdc_phonet: probe of 1-3:1.1 failed with error -16
[  722.666019] usbcore: registered new interface driver cdc_phonet
[  722.769784] usb 1-3: USB disconnect, device number 18
[  726.135141] usb 1-3: new high-speed USB device number 19 using xhci_hcd
[  763.721679] usb 1-3: USB disconnect, device number 19
[  803.164648] usbcore: deregistering interface driver cdc_phonet
[  805.972839] NET: Unregistered protocol family 35
[  838.995154] usb 1-3: new high-speed USB device number 20 using xhci_hcd
[  839.135565] usb 1-3: unable to get BOS descriptor
[  839.436751] usb 1-3: USB disconnect, device number 20
[  840.334862] usb 1-3: new high-speed USB device number 21 using xhci_hcd
[  841.165481] NET: Registered protocol family 35
[  841.184664] cdc_phonet: probe of 1-3:1.1 failed with error -16
[  841.184698] usbcore: registered new interface driver cdc_phonet
[  841.288480] usb 1-3: USB disconnect, device number 21
[  844.693918] usb 1-3: new high-speed USB device number 22 using xhci_hcd
[  873.242791] usb 1-3: USB disconnect, device number 22
[  880.616677] usb 1-3: new full-speed USB device number 23 using xhci_hcd
[  880.763893] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07B2.0004/input/input24
[  880.816792] hid-generic 0003:045E:07B2.0004: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input0
[  880.821082] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:07B2.0005/input/input25
[  880.821225] hid-generic 0003:045E:07B2.0005: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input1
[  880.836315] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:045E:07B2.0006/input/input26
[  880.886897] hid-generic 0003:045E:07B2.0006: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-3/input2
[  947.915776] usbcore: deregistering interface driver cdc_phonet
[  949.964802] NET: Unregistered protocol family 35
[  996.238158] usb 1-1: new high-speed USB device number 24 using xhci_hcd
[  996.378571] usb 1-1: unable to get BOS descriptor
[  996.680203] usb 1-1: USB disconnect, device number 24
[  997.577987] usb 1-1: new high-speed USB device number 25 using xhci_hcd
[  998.409241] NET: Registered protocol family 35
[  998.427901] cdc_phonet: probe of 1-1:1.1 failed with error -16
[  998.427933] usbcore: registered new interface driver cdc_phonet
[  998.532068] usb 1-1: USB disconnect, device number 25
[ 1001.927408] usb 1-1: new high-speed USB device number 26 using xhci_hcd
[ 1080.893895] usb 1-1: USB disconnect, device number 26
[ 1367.612200] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1368.171818] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1368.180324] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 1368.236586] PM: Syncing filesystems ... done.
[ 1368.244533] PM: Preparing system for mem sleep
[ 1368.244676] bbswitch: enabling discrete graphics
[ 1368.441387] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1368.442790] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1368.443872] PM: Entering mem sleep
[ 1368.443882] Suspending console(s) (use no_console_suspend to debug)
[ 1368.444184] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 1368.444356] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1368.446089] sd 0:0:0:0: [sda] Stopping disk
[ 1369.086080] PM: suspend of devices complete after 642.092 msecs
[ 1369.105981] PM: late suspend of devices complete after 19.899 msecs
[ 1369.106596] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1369.126301] PM: noirq suspend of devices complete after 20.319 msecs
[ 1369.126540] ACPI: Preparing to enter system sleep state S3
[ 1369.168505] ACPI : EC: EC stopped
[ 1369.168505] PM: Saving platform NVS memory
[ 1369.168545] Disabling non-boot CPUs ...
[ 1369.168562] intel_pstate CPU 1 exiting
[ 1369.169709] kvm: disabling virtualization on CPU1
[ 1369.169715] smpboot: CPU 1 is now offline
[ 1369.170007] intel_pstate CPU 2 exiting
[ 1369.171141] kvm: disabling virtualization on CPU2
[ 1369.171147] smpboot: CPU 2 is now offline
[ 1369.171664] intel_pstate CPU 3 exiting
[ 1369.172886] kvm: disabling virtualization on CPU3
[ 1369.172901] smpboot: CPU 3 is now offline
[ 1369.177990] ACPI: Low-level resume complete
[ 1369.178111] ACPI : EC: EC started
[ 1369.178113] PM: Restoring platform NVS memory
[ 1369.178901] Enabling non-boot CPUs ...
[ 1369.179033] x86: Booting SMP configuration:
[ 1369.179038] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1369.193491] kvm: enabling virtualization on CPU1
[ 1369.196096]  cache: parent cpu1 should not be sleeping
[ 1369.196732] CPU1 is up
[ 1369.196810] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1369.211546] kvm: enabling virtualization on CPU2
[ 1369.214031]  cache: parent cpu2 should not be sleeping
[ 1369.214440] CPU2 is up
[ 1369.214496] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1369.228691] kvm: enabling virtualization on CPU3
[ 1369.231233]  cache: parent cpu3 should not be sleeping
[ 1369.231628] CPU3 is up
[ 1369.245984] ACPI: Waking up from system sleep state S3
[ 1369.369375] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1369.382034] PM: noirq resume of devices complete after 13.170 msecs
[ 1369.383464] PM: early resume of devices complete after 1.371 msecs
[ 1369.385527] ath: phy0: ASPM enabled: 0x43
[ 1369.385717] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 1369.391473] sd 0:0:0:0: [sda] Starting disk
[ 1369.691449] usb 1-6: reset full-speed USB device number 6 using xhci_hcd
[ 1369.721152] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1369.723943] ata1.00: configured for UDMA/133
[ 1369.741112] ahci 0000:00:1f.2: port does not support device sleep
[ 1369.741199] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1369.743808] ata2.00: configured for UDMA/133
[ 1369.841752] usb 1-6: device firmware changed
[ 1369.961457] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 1370.281407] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 1370.702805] PM: resume of devices complete after 1319.413 msecs
[ 1370.702986] PM: Finishing wakeup.
[ 1370.702987] Restarting tasks ... done.
[ 1370.727174] bbswitch: disabling discrete graphics
[ 1370.727180] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 1370.741048] usb 1-6: USB disconnect, device number 6
[ 1370.775039] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1370.793152] r8169 0000:02:00.0 enp2s0: link down
[ 1370.793188] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1370.793922] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1370.809909] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1370.861045] usb 1-6: new full-speed USB device number 27 using xhci_hcd
[ 1370.917431] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1371.044667] usb 1-6: USB disconnect, device number 27
[ 1371.361068] usb 1-6: new full-speed USB device number 28 using xhci_hcd
[ 1371.820734] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 1371.833406] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 1371.835306] wlp3s0: authenticated
[ 1371.835494] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 1371.835498] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 1371.840986] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 1371.844339] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=4)
[ 1371.844456] wlp3s0: associated
[ 1371.844489] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1372.568133] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1373.652121] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1375.057463] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1375.063539] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 1375.115023] PM: Syncing filesystems ... done.
[ 1375.131870] PM: Preparing system for mem sleep
[ 1375.132009] bbswitch: enabling discrete graphics
[ 1375.336688] Freezing user space processes ... (elapsed 1.172 seconds) done.
[ 1376.509178] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1376.510356] PM: Entering mem sleep
[ 1376.510378] Suspending console(s) (use no_console_suspend to debug)
[ 1376.510688] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 1376.510812] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1376.512564] sd 0:0:0:0: [sda] Stopping disk
[ 1377.150861] PM: suspend of devices complete after 640.351 msecs
[ 1377.170761] PM: late suspend of devices complete after 19.894 msecs
[ 1377.172119] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1377.191097] PM: noirq suspend of devices complete after 20.335 msecs
[ 1377.191448] ACPI: Preparing to enter system sleep state S3
[ 1377.233542] ACPI : EC: EC stopped
[ 1377.233542] PM: Saving platform NVS memory
[ 1377.233599] Disabling non-boot CPUs ...
[ 1377.233631] intel_pstate CPU 1 exiting
[ 1377.234858] kvm: disabling virtualization on CPU1
[ 1377.234868] smpboot: CPU 1 is now offline
[ 1377.235632] intel_pstate CPU 2 exiting
[ 1377.236810] kvm: disabling virtualization on CPU2
[ 1377.236820] smpboot: CPU 2 is now offline
[ 1377.237109] intel_pstate CPU 3 exiting
[ 1377.238539] kvm: disabling virtualization on CPU3
[ 1377.238550] smpboot: CPU 3 is now offline
[ 1377.243684] ACPI: Low-level resume complete
[ 1377.243807] ACPI : EC: EC started
[ 1377.243810] PM: Restoring platform NVS memory
[ 1377.244588] Enabling non-boot CPUs ...
[ 1377.244715] x86: Booting SMP configuration:
[ 1377.244720] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1377.259174] kvm: enabling virtualization on CPU1
[ 1377.261680]  cache: parent cpu1 should not be sleeping
[ 1377.262306] CPU1 is up
[ 1377.262381] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1377.276767] kvm: enabling virtualization on CPU2
[ 1377.279255]  cache: parent cpu2 should not be sleeping
[ 1377.279649] CPU2 is up
[ 1377.279701] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1377.293894] kvm: enabling virtualization on CPU3
[ 1377.296423]  cache: parent cpu3 should not be sleeping
[ 1377.296793] CPU3 is up
[ 1377.311153] ACPI: Waking up from system sleep state S3
[ 1377.434309] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1377.446707] PM: noirq resume of devices complete after 12.752 msecs
[ 1377.448147] PM: early resume of devices complete after 1.380 msecs
[ 1377.448380] usb usb1: root hub lost power or was reset
[ 1377.448387] usb usb2: root hub lost power or was reset
[ 1377.450688] ath: phy0: ASPM enabled: 0x43
[ 1377.455117] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 1377.460376] sd 0:0:0:0: [sda] Starting disk
[ 1377.786227] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[ 1377.796131] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 1377.806052] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1377.806091] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1377.809107] ata2.00: configured for UDMA/133
[ 1377.809210] ata1.00: configured for UDMA/133
[ 1377.825866] ahci 0000:00:1f.2: port does not support device sleep
[ 1378.116009] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 1378.375938] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 1378.635983] usb 1-6: reset full-speed USB device number 28 using xhci_hcd
[ 1378.776133] usb 1-6: device firmware changed
[ 1378.776279] PM: resume of devices complete after 1328.202 msecs
[ 1378.776475] PM: Finishing wakeup.
[ 1378.776477] Restarting tasks ... 
[ 1378.776549] usb 1-6: USB disconnect, device number 28
[ 1378.784449] done.
[ 1378.811895] bbswitch: disabling discrete graphics
[ 1378.811928] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 1378.859003] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1378.877923] r8169 0000:02:00.0 enp2s0: link down
[ 1378.877973] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1378.878610] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1378.894601] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1378.895794] usb 1-6: new full-speed USB device number 29 using xhci_hcd
[ 1378.994978] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1379.098771] usb 1-6: USB disconnect, device number 29
[ 1379.415833] usb 1-6: new full-speed USB device number 30 using xhci_hcd
[ 1379.893856] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 1379.906543] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 1379.908431] wlp3s0: authenticated
[ 1379.908626] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 1379.908630] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 1379.915762] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 1379.920664] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=4)
[ 1379.920771] wlp3s0: associated
[ 1379.920794] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1380.768832] ahci 0000:00:1f.2: port does not support device sleep
[ 1401.594581] usb 2-2: USB disconnect, device number 2
[ 1401.594967] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 1401.596743] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 1411.983196] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2925.103855] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 2925.655963] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2925.664051] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 2925.763366] PM: Syncing filesystems ... done.
[ 2925.783668] PM: Preparing system for mem sleep
[ 2925.784097] bbswitch: enabling discrete graphics
[ 2925.985044] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2925.986717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2925.987894] PM: Entering mem sleep
[ 2925.987910] Suspending console(s) (use no_console_suspend to debug)
[ 2925.988298] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2925.988849] sd 0:0:0:0: [sda] Stopping disk
[ 2926.479156] PM: suspend of devices complete after 491.240 msecs
[ 2926.499156] PM: late suspend of devices complete after 19.997 msecs
[ 2926.499993] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2926.519432] PM: noirq suspend of devices complete after 20.278 msecs
[ 2926.519703] ACPI: Preparing to enter system sleep state S3
[ 2926.562182] ACPI : EC: EC stopped
[ 2926.562182] PM: Saving platform NVS memory
[ 2926.562222] Disabling non-boot CPUs ...
[ 2926.562251] intel_pstate CPU 1 exiting
[ 2926.563391] kvm: disabling virtualization on CPU1
[ 2926.563398] smpboot: CPU 1 is now offline
[ 2926.563671] intel_pstate CPU 2 exiting
[ 2926.564804] kvm: disabling virtualization on CPU2
[ 2926.564809] smpboot: CPU 2 is now offline
[ 2926.565080] intel_pstate CPU 3 exiting
[ 2926.566339] kvm: disabling virtualization on CPU3
[ 2926.566349] smpboot: CPU 3 is now offline
[ 2926.571392] ACPI: Low-level resume complete
[ 2926.571514] ACPI : EC: EC started
[ 2926.571516] PM: Restoring platform NVS memory
[ 2926.572292] Enabling non-boot CPUs ...
[ 2926.572425] x86: Booting SMP configuration:
[ 2926.572429] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2926.586856] kvm: enabling virtualization on CPU1
[ 2926.589369]  cache: parent cpu1 should not be sleeping
[ 2926.590008] CPU1 is up
[ 2926.590084] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 2926.604838] kvm: enabling virtualization on CPU2
[ 2926.607313]  cache: parent cpu2 should not be sleeping
[ 2926.607721] CPU2 is up
[ 2926.607777] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2926.621973] kvm: enabling virtualization on CPU3
[ 2926.624481]  cache: parent cpu3 should not be sleeping
[ 2926.624865] CPU3 is up
[ 2926.639241] ACPI: Waking up from system sleep state S3
[ 2926.762495] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2926.775076] PM: noirq resume of devices complete after 12.942 msecs
[ 2926.776287] PM: early resume of devices complete after 1.151 msecs
[ 2926.778203] usb usb1: root hub lost power or was reset
[ 2926.778210] usb usb2: root hub lost power or was reset
[ 2926.778645] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 2926.779764] ath: phy0: ASPM enabled: 0x43
[ 2926.787198] sd 0:0:0:0: [sda] Starting disk
[ 2927.124391] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 2927.134259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2927.134408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2927.137263] ata2.00: configured for UDMA/133
[ 2927.137843] ata1.00: configured for UDMA/133
[ 2927.137859] ahci 0000:00:1f.2: port does not support device sleep
[ 2927.384132] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 2927.644157] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 2927.964029] usb 1-6: reset full-speed USB device number 30 using xhci_hcd
[ 2928.104156] usb 1-6: device firmware changed
[ 2928.385804] PM: resume of devices complete after 1609.960 msecs
[ 2928.385984] PM: Finishing wakeup.
[ 2928.385985] Restarting tasks ... done.
[ 2928.394373] usb 1-6: USB disconnect, device number 30
[ 2928.424186] bbswitch: disabling discrete graphics
[ 2928.424196] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 2928.475105] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2928.513699] usb 1-6: new full-speed USB device number 31 using xhci_hcd
[ 2928.515806] r8169 0000:02:00.0 enp2s0: link down
[ 2928.515895] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2928.516687] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2928.532784] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2928.683246] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2928.705854] usb 1-6: USB disconnect, device number 31
[ 2929.023650] usb 1-6: new full-speed USB device number 32 using xhci_hcd
[ 2929.624344] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 2929.637075] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 2929.638888] wlp3s0: authenticated
[ 2929.639123] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 2929.639127] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 2929.643391] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 2929.646792] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[ 2929.646904] wlp3s0: associated
[ 2929.646929] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 3486.448926] traps: nemo[742] general protection ip:7fc47c9eff3e sp:7ffdfa6b8988 error:0 in libc-2.23.so[7fc47c962000+198000]
[ 3569.887444] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3570.376541] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3570.386979] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 3570.492633] PM: Syncing filesystems ... done.
[ 3570.502191] PM: Preparing system for mem sleep
[ 3570.502561] bbswitch: enabling discrete graphics
[ 3570.699966] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 3570.701617] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3570.702781] PM: Entering mem sleep
[ 3570.702795] Suspending console(s) (use no_console_suspend to debug)
[ 3570.703137] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3570.706300] sd 0:0:0:0: [sda] Stopping disk
[ 3571.433769] PM: suspend of devices complete after 730.973 msecs
[ 3571.453703] PM: late suspend of devices complete after 19.935 msecs
[ 3571.454248] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 3571.474036] PM: noirq suspend of devices complete after 20.334 msecs
[ 3571.474275] ACPI: Preparing to enter system sleep state S3
[ 3571.517917] ACPI : EC: EC stopped
[ 3571.517917] PM: Saving platform NVS memory
[ 3571.517957] Disabling non-boot CPUs ...
[ 3571.517986] intel_pstate CPU 1 exiting
[ 3571.519130] kvm: disabling virtualization on CPU1
[ 3571.519136] smpboot: CPU 1 is now offline
[ 3571.519394] intel_pstate CPU 2 exiting
[ 3571.520529] kvm: disabling virtualization on CPU2
[ 3571.520534] smpboot: CPU 2 is now offline
[ 3571.520807] intel_pstate CPU 3 exiting
[ 3571.522074] kvm: disabling virtualization on CPU3
[ 3571.522085] smpboot: CPU 3 is now offline
[ 3571.527185] ACPI: Low-level resume complete
[ 3571.527307] ACPI : EC: EC started
[ 3571.527309] PM: Restoring platform NVS memory
[ 3571.528097] Enabling non-boot CPUs ...
[ 3571.528228] x86: Booting SMP configuration:
[ 3571.528232] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3571.542671] kvm: enabling virtualization on CPU1
[ 3571.545246]  cache: parent cpu1 should not be sleeping
[ 3571.545886] CPU1 is up
[ 3571.545965] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 3571.560719] kvm: enabling virtualization on CPU2
[ 3571.563206]  cache: parent cpu2 should not be sleeping
[ 3571.563609] CPU2 is up
[ 3571.563663] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3571.577853] kvm: enabling virtualization on CPU3
[ 3571.580394]  cache: parent cpu3 should not be sleeping
[ 3571.580784] CPU3 is up
[ 3571.595153] ACPI: Waking up from system sleep state S3
[ 3571.717110] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 3571.729618] PM: noirq resume of devices complete after 12.863 msecs
[ 3571.730703] PM: early resume of devices complete after 1.025 msecs
[ 3571.731107] usb usb1: root hub lost power or was reset
[ 3571.731114] usb usb2: root hub lost power or was reset
[ 3571.732948] ath: phy0: ASPM enabled: 0x43
[ 3571.733006] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 3571.745256] sd 0:0:0:0: [sda] Starting disk
[ 3571.751468] r8169 0000:02:00.0 enp2s0: link down
[ 3572.079080] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 3572.088869] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3572.089006] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3572.091964] ata1.00: configured for UDMA/133
[ 3572.091980] ahci 0000:00:1f.2: port does not support device sleep
[ 3572.092412] ata2.00: configured for UDMA/133
[ 3572.398796] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 3572.658772] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 3572.918862] usb 1-6: reset full-speed USB device number 32 using xhci_hcd
[ 3573.059004] usb 1-6: device firmware changed
[ 3573.059309] PM: resume of devices complete after 1328.832 msecs
[ 3573.059819] PM: Finishing wakeup.
[ 3573.059823] Restarting tasks ... 
[ 3573.059939] usb 1-6: USB disconnect, device number 32
[ 3573.069740] done.
[ 3573.097572] bbswitch: disabling discrete graphics
[ 3573.097583] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 3573.178604] usb 1-6: new full-speed USB device number 33 using xhci_hcd
[ 3573.199718] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 3573.240655] r8169 0000:02:00.0 enp2s0: link down
[ 3573.240698] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 3573.241543] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3573.257849] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3573.345255] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3573.368421] usb 1-6: USB disconnect, device number 33
[ 3573.698513] usb 1-6: new full-speed USB device number 34 using xhci_hcd
[ 3574.273242] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 3574.286074] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 3574.288007] wlp3s0: authenticated
[ 3574.288428] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 3574.288439] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 3574.308366] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 3574.311712] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=1)
[ 3574.311816] wlp3s0: associated
[ 3574.311841] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 5868.911122] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5869.449010] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5869.456432] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 5869.525881] PM: Syncing filesystems ... done.
[ 5869.554496] PM: Preparing system for mem sleep
[ 5869.554671] bbswitch: enabling discrete graphics
[ 5869.754937] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 5869.758489] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5869.759622] PM: Entering mem sleep
[ 5869.759634] Suspending console(s) (use no_console_suspend to debug)
[ 5869.760090] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5869.760128] sd 0:0:0:0: [sda] Stopping disk
[ 5870.379048] PM: suspend of devices complete after 619.398 msecs
[ 5870.398977] PM: late suspend of devices complete after 19.927 msecs
[ 5870.399684] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 5870.419309] PM: noirq suspend of devices complete after 20.333 msecs
[ 5870.419641] ACPI: Preparing to enter system sleep state S3
[ 5870.461595] ACPI : EC: EC stopped
[ 5870.461596] PM: Saving platform NVS memory
[ 5870.461648] Disabling non-boot CPUs ...
[ 5870.461682] intel_pstate CPU 1 exiting
[ 5870.462870] kvm: disabling virtualization on CPU1
[ 5870.462879] smpboot: CPU 1 is now offline
[ 5870.463217] intel_pstate CPU 2 exiting
[ 5870.464386] kvm: disabling virtualization on CPU2
[ 5870.464391] smpboot: CPU 2 is now offline
[ 5870.464719] intel_pstate CPU 3 exiting
[ 5870.465851] kvm: disabling virtualization on CPU3
[ 5870.465856] smpboot: CPU 3 is now offline
[ 5870.470221] ACPI: Low-level resume complete
[ 5870.470343] ACPI : EC: EC started
[ 5870.470345] PM: Restoring platform NVS memory
[ 5870.471141] Enabling non-boot CPUs ...
[ 5870.471270] x86: Booting SMP configuration:
[ 5870.471275] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5870.485733] kvm: enabling virtualization on CPU1
[ 5870.488322]  cache: parent cpu1 should not be sleeping
[ 5870.488947] CPU1 is up
[ 5870.489022] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 5870.503502] kvm: enabling virtualization on CPU2
[ 5870.506063]  cache: parent cpu2 should not be sleeping
[ 5870.506455] CPU2 is up
[ 5870.506511] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5870.520701] kvm: enabling virtualization on CPU3
[ 5870.523218]  cache: parent cpu3 should not be sleeping
[ 5870.523587] CPU3 is up
[ 5870.537941] ACPI: Waking up from system sleep state S3
[ 5870.662191] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 5870.674389] PM: noirq resume of devices complete after 12.556 msecs
[ 5870.675636] PM: early resume of devices complete after 1.187 msecs
[ 5870.675867] usb usb1: root hub lost power or was reset
[ 5870.675874] usb usb2: root hub lost power or was reset
[ 5870.678084] ath: phy0: ASPM enabled: 0x43
[ 5870.678248] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 5870.688157] sd 0:0:0:0: [sda] Starting disk
[ 5870.696270] r8169 0000:02:00.0 enp2s0: link down
[ 5871.023865] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 5871.033669] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5871.033781] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5871.036631] ata2.00: configured for UDMA/133
[ 5871.037203] ata1.00: configured for UDMA/133
[ 5871.037218] ahci 0000:00:1f.2: port does not support device sleep
[ 5871.343759] usb 1-6: reset full-speed USB device number 34 using xhci_hcd
[ 5871.483912] usb 1-6: device firmware changed
[ 5871.603709] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 5871.863614] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 5872.017629] PM: resume of devices complete after 1342.230 msecs
[ 5872.017810] PM: Finishing wakeup.
[ 5872.017812] Restarting tasks ... 
[ 5872.017868] usb 1-6: USB disconnect, device number 34
[ 5872.021161] done.
[ 5872.056968] bbswitch: disabling discrete graphics
[ 5872.056975] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 5872.156827] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 5872.195445] r8169 0000:02:00.0 enp2s0: link down
[ 5872.195489] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 5872.196700] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5872.212809] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5872.212830] usb 1-6: new full-speed USB device number 35 using xhci_hcd
[ 5872.313471] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5872.458306] usb 1-6: USB disconnect, device number 35
[ 5872.773322] usb 1-6: new full-speed USB device number 36 using xhci_hcd
[ 5873.221821] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 5873.234443] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 5873.236334] wlp3s0: authenticated
[ 5873.236485] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 5873.236489] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 5873.243200] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 5873.246620] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[ 5873.246724] wlp3s0: associated
[ 5873.246759] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 6276.225501] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 6276.721128] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6276.733985] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 6276.783491] PM: Syncing filesystems ... done.
[ 6276.810344] PM: Preparing system for mem sleep
[ 6276.810491] bbswitch: enabling discrete graphics
[ 6277.007135] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6277.008578] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6277.009683] PM: Entering mem sleep
[ 6277.009694] Suspending console(s) (use no_console_suspend to debug)
[ 6277.010044] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6277.013241] sd 0:0:0:0: [sda] Stopping disk
[ 6277.571191] PM: suspend of devices complete after 561.512 msecs
[ 6277.591101] PM: late suspend of devices complete after 19.910 msecs
[ 6277.592319] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6277.611444] PM: noirq suspend of devices complete after 20.345 msecs
[ 6277.611683] ACPI: Preparing to enter system sleep state S3
[ 6277.653646] ACPI : EC: EC stopped
[ 6277.653646] PM: Saving platform NVS memory
[ 6277.653686] Disabling non-boot CPUs ...
[ 6277.653703] intel_pstate CPU 1 exiting
[ 6277.654845] kvm: disabling virtualization on CPU1
[ 6277.654850] smpboot: CPU 1 is now offline
[ 6277.655113] intel_pstate CPU 2 exiting
[ 6277.656248] kvm: disabling virtualization on CPU2
[ 6277.656254] smpboot: CPU 2 is now offline
[ 6277.656717] intel_pstate CPU 3 exiting
[ 6277.657847] kvm: disabling virtualization on CPU3
[ 6277.657853] smpboot: CPU 3 is now offline
[ 6277.662160] ACPI: Low-level resume complete
[ 6277.662283] ACPI : EC: EC started
[ 6277.662285] PM: Restoring platform NVS memory
[ 6277.663071] Enabling non-boot CPUs ...
[ 6277.663202] x86: Booting SMP configuration:
[ 6277.663206] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6277.677641] kvm: enabling virtualization on CPU1
[ 6277.680143]  cache: parent cpu1 should not be sleeping
[ 6277.680770] CPU1 is up
[ 6277.680847] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 6277.695602] kvm: enabling virtualization on CPU2
[ 6277.698130]  cache: parent cpu2 should not be sleeping
[ 6277.698525] CPU2 is up
[ 6277.698579] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6277.712769] kvm: enabling virtualization on CPU3
[ 6277.715266]  cache: parent cpu3 should not be sleeping
[ 6277.715639] CPU3 is up
[ 6277.729989] ACPI: Waking up from system sleep state S3
[ 6277.854677] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6277.866705] PM: noirq resume of devices complete after 12.384 msecs
[ 6277.867762] PM: early resume of devices complete after 0.996 msecs
[ 6277.868091] usb usb1: root hub lost power or was reset
[ 6277.868098] usb usb2: root hub lost power or was reset
[ 6277.870140] ath: phy0: ASPM enabled: 0x43
[ 6277.870500] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 6277.872026] sd 0:0:0:0: [sda] Starting disk
[ 6277.888146] r8169 0000:02:00.0 enp2s0: link down
[ 6278.215879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6278.215925] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6278.215969] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 6278.218761] ata2.00: configured for UDMA/133
[ 6278.219549] ata1.00: configured for UDMA/133
[ 6278.219565] ahci 0000:00:1f.2: port does not support device sleep
[ 6278.535705] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 6278.795596] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 6279.055661] usb 1-6: reset full-speed USB device number 36 using xhci_hcd
[ 6279.195822] usb 1-6: device firmware changed
[ 6279.196055] PM: resume of devices complete after 1328.626 msecs
[ 6279.196568] PM: Finishing wakeup.
[ 6279.196572] Restarting tasks ... 
[ 6279.197410] usb 1-6: USB disconnect, device number 36
[ 6279.208443] done.
[ 6279.236069] bbswitch: disabling discrete graphics
[ 6279.236078] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 6279.346722] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6279.375379] usb 1-6: new full-speed USB device number 37 using xhci_hcd
[ 6279.387506] r8169 0000:02:00.0 enp2s0: link down
[ 6279.387556] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6279.388538] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6279.404676] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6279.520862] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6279.564843] usb 1-6: USB disconnect, device number 37
[ 6279.895313] usb 1-6: new full-speed USB device number 38 using xhci_hcd
[ 6280.442012] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 6280.454657] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 6280.457052] wlp3s0: authenticated
[ 6280.457190] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 6280.457193] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 6280.465107] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 6280.468503] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=1)
[ 6280.468626] wlp3s0: associated
[ 6280.468681] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 6311.973267] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 6312.500343] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6312.508672] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 6312.563303] PM: Syncing filesystems ... done.
[ 6312.589162] PM: Preparing system for mem sleep
[ 6312.589341] bbswitch: enabling discrete graphics
[ 6312.792591] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6312.794069] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6312.795202] PM: Entering mem sleep
[ 6312.795213] Suspending console(s) (use no_console_suspend to debug)
[ 6312.795590] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6312.796141] sd 0:0:0:0: [sda] Stopping disk
[ 6313.606695] PM: suspend of devices complete after 811.562 msecs
[ 6313.626721] PM: late suspend of devices complete after 20.022 msecs
[ 6313.627950] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6313.646999] PM: noirq suspend of devices complete after 20.279 msecs
[ 6313.647330] ACPI: Preparing to enter system sleep state S3
[ 6313.689142] ACPI : EC: EC stopped
[ 6313.689142] PM: Saving platform NVS memory
[ 6313.689183] Disabling non-boot CPUs ...
[ 6313.689209] intel_pstate CPU 1 exiting
[ 6313.690389] kvm: disabling virtualization on CPU1
[ 6313.690396] smpboot: CPU 1 is now offline
[ 6313.690991] intel_pstate CPU 2 exiting
[ 6313.692298] kvm: disabling virtualization on CPU2
[ 6313.693064] smpboot: CPU 2 is now offline
[ 6313.693668] intel_pstate CPU 3 exiting
[ 6313.694889] kvm: disabling virtualization on CPU3
[ 6313.694902] smpboot: CPU 3 is now offline
[ 6313.699896] ACPI: Low-level resume complete
[ 6313.700018] ACPI : EC: EC started
[ 6313.700021] PM: Restoring platform NVS memory
[ 6313.700800] Enabling non-boot CPUs ...
[ 6313.700931] x86: Booting SMP configuration:
[ 6313.700936] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6313.715370] kvm: enabling virtualization on CPU1
[ 6313.717967]  cache: parent cpu1 should not be sleeping
[ 6313.718592] CPU1 is up
[ 6313.718671] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 6313.733413] kvm: enabling virtualization on CPU2
[ 6313.735921]  cache: parent cpu2 should not be sleeping
[ 6313.736314] CPU2 is up
[ 6313.736366] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6313.750556] kvm: enabling virtualization on CPU3
[ 6313.753134]  cache: parent cpu3 should not be sleeping
[ 6313.753502] CPU3 is up
[ 6313.767888] ACPI: Waking up from system sleep state S3
[ 6313.889989] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6313.902543] PM: noirq resume of devices complete after 12.918 msecs
[ 6313.903812] PM: early resume of devices complete after 1.211 msecs
[ 6313.903994] usb usb1: root hub lost power or was reset
[ 6313.904001] usb usb2: root hub lost power or was reset
[ 6313.906732] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 6313.906738] ath: phy0: ASPM enabled: 0x43
[ 6313.909915] sd 0:0:0:0: [sda] Starting disk
[ 6313.924432] r8169 0000:02:00.0 enp2s0: link down
[ 6314.251840] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6314.251884] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6314.251941] usb 1-6: reset full-speed USB device number 38 using xhci_hcd
[ 6314.254794] ata2.00: configured for UDMA/133
[ 6314.255399] ata1.00: configured for UDMA/133
[ 6314.255414] ahci 0000:00:1f.2: port does not support device sleep
[ 6314.392134] usb 1-6: device firmware changed
[ 6314.511884] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 6314.771759] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 6315.031509] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 6315.773353] PM: resume of devices complete after 1870.014 msecs
[ 6315.773553] PM: Finishing wakeup.
[ 6315.773554] Restarting tasks ... 
[ 6315.774795] usb 1-6: USB disconnect, device number 38
[ 6315.780460] done.
[ 6315.807964] bbswitch: disabling discrete graphics
[ 6315.807971] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 6315.912537] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6315.951274] usb 1-6: new full-speed USB device number 39 using xhci_hcd
[ 6315.953385] r8169 0000:02:00.0 enp2s0: link down
[ 6315.953422] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6315.954966] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6315.970917] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6316.096611] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6316.136209] usb 1-6: USB disconnect, device number 39
[ 6316.451097] usb 1-6: new full-speed USB device number 40 using xhci_hcd
[ 6317.000650] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 6317.013338] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 6317.015187] wlp3s0: authenticated
[ 6317.015340] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 6317.015344] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 6317.020934] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 6317.024359] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[ 6317.024466] wlp3s0: associated
[ 6317.024490] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 6899.540282] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 6900.047323] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6900.055140] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 6900.117491] PM: Syncing filesystems ... done.
[ 6900.143963] PM: Preparing system for mem sleep
[ 6900.144127] bbswitch: enabling discrete graphics
[ 6900.340986] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6900.342456] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6900.343598] PM: Entering mem sleep
[ 6900.343611] Suspending console(s) (use no_console_suspend to debug)
[ 6900.343996] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6900.347248] sd 0:0:0:0: [sda] Stopping disk
[ 6900.845549] PM: suspend of devices complete after 501.895 msecs
[ 6900.865426] PM: late suspend of devices complete after 19.876 msecs
[ 6900.866080] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6900.885795] PM: noirq suspend of devices complete after 20.370 msecs
[ 6900.886126] ACPI: Preparing to enter system sleep state S3
[ 6900.928600] ACPI : EC: EC stopped
[ 6900.928601] PM: Saving platform NVS memory
[ 6900.928651] Disabling non-boot CPUs ...
[ 6900.928685] intel_pstate CPU 1 exiting
[ 6900.929863] kvm: disabling virtualization on CPU1
[ 6900.929872] smpboot: CPU 1 is now offline
[ 6900.930189] intel_pstate CPU 2 exiting
[ 6900.931352] kvm: disabling virtualization on CPU2
[ 6900.931358] smpboot: CPU 2 is now offline
[ 6900.931662] intel_pstate CPU 3 exiting
[ 6900.932794] kvm: disabling virtualization on CPU3
[ 6900.932799] smpboot: CPU 3 is now offline
[ 6900.937114] ACPI: Low-level resume complete
[ 6900.937235] ACPI : EC: EC started
[ 6900.937238] PM: Restoring platform NVS memory
[ 6900.938023] Enabling non-boot CPUs ...
[ 6900.938152] x86: Booting SMP configuration:
[ 6900.938157] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6900.952590] kvm: enabling virtualization on CPU1
[ 6900.955080]  cache: parent cpu1 should not be sleeping
[ 6900.955715] CPU1 is up
[ 6900.955790] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 6900.970545] kvm: enabling virtualization on CPU2
[ 6900.973021]  cache: parent cpu2 should not be sleeping
[ 6900.973427] CPU2 is up
[ 6900.973483] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6900.987672] kvm: enabling virtualization on CPU3
[ 6900.990212]  cache: parent cpu3 should not be sleeping
[ 6900.990596] CPU3 is up
[ 6901.004959] ACPI: Waking up from system sleep state S3
[ 6901.129344] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6901.141045] PM: noirq resume of devices complete after 12.190 msecs
[ 6901.142320] PM: early resume of devices complete after 1.214 msecs
[ 6901.142500] usb usb1: root hub lost power or was reset
[ 6901.142507] usb usb2: root hub lost power or was reset
[ 6901.144506] ath: phy0: ASPM enabled: 0x43
[ 6901.144699] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 6901.146410] sd 0:0:0:0: [sda] Starting disk
[ 6901.162750] r8169 0000:02:00.0 enp2s0: link down
[ 6901.480223] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6901.483316] ata2.00: configured for UDMA/133
[ 6901.490246] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6901.490327] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 6901.493586] ata1.00: configured for UDMA/133
[ 6901.493601] ahci 0000:00:1f.2: port does not support device sleep
[ 6901.810160] usb 1-6: reset full-speed USB device number 40 using xhci_hcd
[ 6901.950386] usb 1-6: device firmware changed
[ 6902.070179] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[ 6902.330134] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[ 6902.484451] PM: resume of devices complete after 1342.372 msecs
[ 6902.484963] PM: Finishing wakeup.
[ 6902.484966] Restarting tasks ... 
[ 6902.485085] usb 1-6: USB disconnect, device number 40
[ 6902.493176] done.
[ 6902.524963] bbswitch: disabling discrete graphics
[ 6902.524971] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[ 6902.619855] usb 1-6: new full-speed USB device number 41 using xhci_hcd
[ 6902.642221] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6902.681913] r8169 0000:02:00.0 enp2s0: link down
[ 6902.681954] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6902.682770] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6902.698929] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6902.802737] usb 1-6: USB disconnect, device number 41
[ 6902.816449] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6903.119754] usb 1-6: new full-speed USB device number 42 using xhci_hcd
[ 6903.721021] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[ 6903.733684] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[ 6903.735614] wlp3s0: authenticated
[ 6903.735802] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[ 6903.735806] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[ 6903.739873] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[ 6903.743293] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=4)
[ 6903.743398] wlp3s0: associated
[ 6903.743434] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 6910.028525] usb 1-1: new high-speed USB device number 43 using xhci_hcd
[ 6910.170072] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 6910.170138] scsi host8: usb-storage 1-1:1.0
[ 6911.168917] scsi 8:0:0:0: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[ 6911.169226] scsi 8:0:0:1: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[ 6911.173755] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 6911.177502] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[ 6911.635251] usb 1-1: USB disconnect, device number 43
[ 6912.248111] usb 1-1: new high-speed USB device number 44 using xhci_hcd
[ 6912.390639] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 6912.390757] scsi host9: usb-storage 1-1:1.0
[ 6913.388642] scsi 9:0:0:0: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[ 6913.388899] scsi 9:0:0:1: Direct-Access     Nokia    N900              031 PQ: 0 ANSI: 2
[ 6913.399523] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 6913.399955] sd 9:0:0:1: [sdc] Attached SCSI removable disk
[ 6951.627407] usb 1-1: USB disconnect, device number 44
[ 6953.450476] usb 1-1: new high-speed USB device number 45 using xhci_hcd
[ 6954.131337] cdc_acm 1-1:1.6: ttyACM0: USB ACM device
[ 6954.131863] usbcore: registered new interface driver cdc_acm
[ 6954.131866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6954.136801] cdc_ether 1-1:1.8 usb0: register 'cdc_ether' at usb-0000:00:14.0-1, CDC Ethernet Device, d6:ca:06:d4:92:d6
[ 6954.136834] usbcore: registered new interface driver cdc_ether
[ 6954.143513] cdc_ether 1-1:1.8 enp0s20u1i8: renamed from usb0
[ 6954.202270] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1i8: link is not ready
[ 6954.202398] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 6954.202414] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 7046.373376] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7088.013840] asus_wmi: Unknown key cf pressed
[ 7088.175738] ahci 0000:00:1f.2: port does not support device sleep
[ 9043.144114] [drm] stuck on render ring
[ 9043.145038] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [277], reason: Ring hung, action: reset
[ 9043.145040] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 9043.145041] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 9043.145042] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 9043.145043] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 9043.145043] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 9043.147170] drm/i915: Resetting chip after gpu hang
[ 9324.197930] usb 1-1: USB disconnect, device number 45
[ 9324.251836] cdc_ether 1-1:1.8 enp0s20u1i8: unregister 'cdc_ether' usb-0000:00:14.0-1, CDC Ethernet Device
[ 9325.021302] usb 1-1: new high-speed USB device number 46 using xhci_hcd
[ 9325.164596] cdc_acm 1-1:1.6: ttyACM0: USB ACM device
[ 9325.166155] cdc_ether 1-1:1.8 usb0: register 'cdc_ether' at usb-0000:00:14.0-1, CDC Ethernet Device, d6:ca:06:d4:92:d6
[ 9325.717294] cdc_ether 1-1:1.8 enp0s20u1i8: renamed from usb0
[ 9325.753731] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1i8: link is not ready
[ 9325.753851] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 9325.753858] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 9325.778650] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 9325.778672] cdc_ether 1-1:1.8 enp0s20u1i8: kevent 12 may have been dropped
[ 9326.107660] usb 1-1: USB disconnect, device number 46
[ 9326.141586] cdc_ether 1-1:1.8 enp0s20u1i8: unregister 'cdc_ether' usb-0000:00:14.0-1, CDC Ethernet Device
[12589.677652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12590.241664] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[12590.249186] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[12590.295840] PM: Syncing filesystems ... done.
[12590.320952] PM: Preparing system for mem sleep
[12590.321096] bbswitch: enabling discrete graphics
[12590.535465] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12590.536928] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[12590.537760] PM: Entering mem sleep
[12590.537771] Suspending console(s) (use no_console_suspend to debug)
[12590.538184] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12590.538226] sd 0:0:0:0: [sda] Stopping disk
[12591.254514] PM: suspend of devices complete after 716.755 msecs
[12591.274539] PM: late suspend of devices complete after 20.021 msecs
[12591.275903] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12591.294829] PM: noirq suspend of devices complete after 20.287 msecs
[12591.295370] ACPI: Preparing to enter system sleep state S3
[12591.337963] ACPI : EC: EC stopped
[12591.337964] PM: Saving platform NVS memory
[12591.338067] Disabling non-boot CPUs ...
[12591.338125] intel_pstate CPU 1 exiting
[12591.339543] kvm: disabling virtualization on CPU1
[12591.339562] smpboot: CPU 1 is now offline
[12591.340953] intel_pstate CPU 2 exiting
[12591.342279] kvm: disabling virtualization on CPU2
[12591.342297] smpboot: CPU 2 is now offline
[12591.342785] intel_pstate CPU 3 exiting
[12591.344275] kvm: disabling virtualization on CPU3
[12591.344286] smpboot: CPU 3 is now offline
[12591.349441] ACPI: Low-level resume complete
[12591.349563] ACPI : EC: EC started
[12591.349565] PM: Restoring platform NVS memory
[12591.350352] Enabling non-boot CPUs ...
[12591.350481] x86: Booting SMP configuration:
[12591.350485] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12591.364919] kvm: enabling virtualization on CPU1
[12591.367521]  cache: parent cpu1 should not be sleeping
[12591.368149] CPU1 is up
[12591.368228] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12591.382988] kvm: enabling virtualization on CPU2
[12591.385514]  cache: parent cpu2 should not be sleeping
[12591.385901] CPU2 is up
[12591.385956] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12591.400169] kvm: enabling virtualization on CPU3
[12591.402731]  cache: parent cpu3 should not be sleeping
[12591.403106] CPU3 is up
[12591.417644] ACPI: Waking up from system sleep state S3
[12591.547933] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12591.560360] PM: noirq resume of devices complete after 12.787 msecs
[12591.561500] PM: early resume of devices complete after 1.080 msecs
[12591.563638] ath: phy0: ASPM enabled: 0x43
[12591.564001] rtc_cmos 00:04: System wakeup disabled by ACPI
[12591.565654] sd 0:0:0:0: [sda] Starting disk
[12591.859997] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[12591.909664] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12591.909703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12591.911484] ata1.00: configured for UDMA/133
[12591.912384] ata2.00: configured for UDMA/133
[12591.929549] ahci 0000:00:1f.2: port does not support device sleep
[12592.179856] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[12592.439739] usb 1-6: reset full-speed USB device number 42 using xhci_hcd
[12592.579795] usb 1-6: device firmware changed
[12592.601944] PM: resume of devices complete after 1040.653 msecs
[12592.602442] PM: Finishing wakeup.
[12592.602446] Restarting tasks ... done.
[12592.639350] usb 1-6: USB disconnect, device number 42
[12592.642869] bbswitch: disabling discrete graphics
[12592.642878] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[12592.684377] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[12592.701451] r8169 0000:02:00.0 enp2s0: link down
[12592.701499] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[12592.703144] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12592.719115] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12592.759343] usb 1-6: new full-speed USB device number 47 using xhci_hcd
[12592.834423] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12592.942069] usb 1-6: USB disconnect, device number 47
[12593.259221] usb 1-6: new full-speed USB device number 48 using xhci_hcd
[12593.734296] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[12593.746964] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[12593.748803] wlp3s0: authenticated
[12593.748956] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[12593.748959] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[12593.749087] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[12593.752458] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[12593.752561] wlp3s0: associated
[12593.752586] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[13331.842447] ahci 0000:00:1f.2: port does not support device sleep
[13483.290333] [drm] stuck on render ring
[13483.291489] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [277], reason: Ring hung, action: reset
[13483.293640] drm/i915: Resetting chip after gpu hang
[13489.289152] [drm] stuck on render ring
[13489.290250] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [277], reason: Ring hung, action: reset
[13489.290323] [drm:i915_set_reset_status [i915]] *ERROR* gpu hanging too fast, banning!
[13489.292421] drm/i915: Resetting chip after gpu hang
[13639.677040] hospital[19861]: segfault at 10 ip 0000000000400d14 sp 00007ffc72890eb0 error 4 in hospital[400000+2000]
[13801.182070] hospital[19907]: segfault at 10 ip 0000000000400d14 sp 00007ffda5ca6500 error 4 in hospital[400000+2000]
[13807.521378] hospital[19952]: segfault at 10 ip 0000000000400d14 sp 00007ffc55609ec0 error 4 in hospital[400000+2000]
[13893.831329] hospital[20014]: segfault at 10 ip 0000000000400d14 sp 00007ffe32eafe60 error 4 in hospital[400000+2000]
[13900.266426] hospital[20045]: segfault at 10 ip 0000000000400d14 sp 00007fff142a9020 error 4 in hospital[400000+2000]
[13943.008458] hospital[20080]: segfault at 10 ip 0000000000400d14 sp 00007ffe6396a3c0 error 4 in hospital[400000+2000]
[14041.509253] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[14042.109188] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[14042.116692] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[14042.168896] PM: Syncing filesystems ... done.
[14042.192307] PM: Preparing system for mem sleep
[14042.192451] bbswitch: enabling discrete graphics
[14042.398129] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14042.399677] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14042.400807] PM: Entering mem sleep
[14042.400819] Suspending console(s) (use no_console_suspend to debug)
[14042.401191] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14042.404336] sd 0:0:0:0: [sda] Stopping disk
[14043.162573] PM: suspend of devices complete after 761.753 msecs
[14043.182480] PM: late suspend of devices complete after 19.905 msecs
[14043.183174] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14043.202787] PM: noirq suspend of devices complete after 20.308 msecs
[14043.203119] ACPI: Preparing to enter system sleep state S3
[14043.245652] ACPI : EC: EC stopped
[14043.245652] PM: Saving platform NVS memory
[14043.245705] Disabling non-boot CPUs ...
[14043.245726] intel_pstate CPU 1 exiting
[14043.246925] kvm: disabling virtualization on CPU1
[14043.246934] smpboot: CPU 1 is now offline
[14043.247255] intel_pstate CPU 2 exiting
[14043.248437] kvm: disabling virtualization on CPU2
[14043.248443] smpboot: CPU 2 is now offline
[14043.248774] intel_pstate CPU 3 exiting
[14043.249906] kvm: disabling virtualization on CPU3
[14043.249911] smpboot: CPU 3 is now offline
[14043.254282] ACPI: Low-level resume complete
[14043.254403] ACPI : EC: EC started
[14043.254406] PM: Restoring platform NVS memory
[14043.255173] Enabling non-boot CPUs ...
[14043.255303] x86: Booting SMP configuration:
[14043.255307] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14043.269804] kvm: enabling virtualization on CPU1
[14043.272324]  cache: parent cpu1 should not be sleeping
[14043.272959] CPU1 is up
[14043.273041] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14043.287674] kvm: enabling virtualization on CPU2
[14043.290160]  cache: parent cpu2 should not be sleeping
[14043.290570] CPU2 is up
[14043.290629] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14043.304819] kvm: enabling virtualization on CPU3
[14043.307389]  cache: parent cpu3 should not be sleeping
[14043.307778] CPU3 is up
[14043.322328] ACPI: Waking up from system sleep state S3
[14043.445333] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14043.457915] PM: noirq resume of devices complete after 12.924 msecs
[14043.459345] PM: early resume of devices complete after 1.370 msecs
[14043.459518] usb usb1: root hub lost power or was reset
[14043.459524] usb usb2: root hub lost power or was reset
[14043.461554] ath: phy0: ASPM enabled: 0x43
[14043.461844] rtc_cmos 00:04: System wakeup disabled by ACPI
[14043.467788] sd 0:0:0:0: [sda] Starting disk
[14043.807236] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14043.807309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14043.807424] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[14043.810146] ata2.00: configured for UDMA/133
[14043.810911] ata1.00: configured for UDMA/133
[14043.810926] ahci 0000:00:1f.2: port does not support device sleep
[14044.067284] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[14044.387237] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[14044.647186] usb 1-6: reset full-speed USB device number 48 using xhci_hcd
[14044.787237] usb 1-6: device firmware changed
[14044.808902] PM: resume of devices complete after 1349.809 msecs
[14044.809145] PM: Finishing wakeup.
[14044.809147] Restarting tasks ... 
[14044.811087] usb 1-6: USB disconnect, device number 48
[14044.819490] done.
[14044.852819] bbswitch: disabling discrete graphics
[14044.852830] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[14044.892267] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14044.928929] r8169 0000:02:00.0 enp2s0: link down
[14044.928978] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14044.929671] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14044.945667] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14044.986865] usb 1-6: new full-speed USB device number 49 using xhci_hcd
[14045.062760] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14045.169609] usb 1-6: USB disconnect, device number 49
[14045.486788] usb 1-6: new full-speed USB device number 50 using xhci_hcd
[14045.986039] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[14045.998647] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[14046.000484] wlp3s0: authenticated
[14046.000678] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[14046.000681] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[14046.006621] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[14046.010037] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[14046.010145] wlp3s0: associated
[14046.010170] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[14470.890035] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[14471.432211] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[14471.442839] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[14471.513641] PM: Syncing filesystems ... done.
[14471.549857] PM: Preparing system for mem sleep
[14471.550035] bbswitch: enabling discrete graphics
[14471.756978] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14471.758529] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14471.759684] PM: Entering mem sleep
[14471.759698] Suspending console(s) (use no_console_suspend to debug)
[14471.760088] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14471.760635] sd 0:0:0:0: [sda] Stopping disk
[14472.541123] PM: suspend of devices complete after 781.424 msecs
[14472.561122] PM: late suspend of devices complete after 19.993 msecs
[14472.562391] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14472.581370] PM: noirq suspend of devices complete after 20.247 msecs
[14472.581701] ACPI: Preparing to enter system sleep state S3
[14472.623708] ACPI : EC: EC stopped
[14472.623709] PM: Saving platform NVS memory
[14472.623761] Disabling non-boot CPUs ...
[14472.623798] intel_pstate CPU 1 exiting
[14472.624996] kvm: disabling virtualization on CPU1
[14472.625004] smpboot: CPU 1 is now offline
[14472.625383] intel_pstate CPU 2 exiting
[14472.626655] kvm: disabling virtualization on CPU2
[14472.626668] smpboot: CPU 2 is now offline
[14472.627618] intel_pstate CPU 3 exiting
[14472.628790] kvm: disabling virtualization on CPU3
[14472.628800] smpboot: CPU 3 is now offline
[14472.633423] ACPI: Low-level resume complete
[14472.633545] ACPI : EC: EC started
[14472.633548] PM: Restoring platform NVS memory
[14472.634355] Enabling non-boot CPUs ...
[14472.634486] x86: Booting SMP configuration:
[14472.634490] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14472.648995] kvm: enabling virtualization on CPU1
[14472.651598]  cache: parent cpu1 should not be sleeping
[14472.652231] CPU1 is up
[14472.652309] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14472.666760] kvm: enabling virtualization on CPU2
[14472.669254]  cache: parent cpu2 should not be sleeping
[14472.669647] CPU2 is up
[14472.669704] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14472.683896] kvm: enabling virtualization on CPU3
[14472.686461]  cache: parent cpu3 should not be sleeping
[14472.686839] CPU3 is up
[14472.701212] ACPI: Waking up from system sleep state S3
[14472.824434] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14472.836807] PM: noirq resume of devices complete after 12.871 msecs
[14472.838121] PM: early resume of devices complete after 1.254 msecs
[14472.838318] usb usb1: root hub lost power or was reset
[14472.838325] usb usb2: root hub lost power or was reset
[14472.840457] ath: phy0: ASPM enabled: 0x43
[14472.840474] rtc_cmos 00:04: System wakeup disabled by ACPI
[14472.850790] sd 0:0:0:0: [sda] Starting disk
[14472.858531] r8169 0000:02:00.0 enp2s0: link down
[14473.186030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14473.186074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14473.186152] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[14473.188918] ata2.00: configured for UDMA/133
[14473.189690] ata1.00: configured for UDMA/133
[14473.189705] ahci 0000:00:1f.2: port does not support device sleep
[14473.446086] usb 1-6: reset full-speed USB device number 50 using xhci_hcd
[14473.586140] usb 1-6: device firmware changed
[14473.705911] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[14474.025991] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[14474.447684] PM: resume of devices complete after 1609.841 msecs
[14474.447909] PM: Finishing wakeup.
[14474.447910] Restarting tasks ... done.
[14474.455715] usb 1-6: USB disconnect, device number 50
[14474.504512] bbswitch: disabling discrete graphics
[14474.504524] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[14474.575592] usb 1-6: new full-speed USB device number 51 using xhci_hcd
[14474.606599] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14474.647682] r8169 0000:02:00.0 enp2s0: link down
[14474.647735] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14474.648547] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14474.664580] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14474.751414] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14474.764033] usb 1-6: USB disconnect, device number 51
[14475.075570] usb 1-6: new full-speed USB device number 52 using xhci_hcd
[14475.660775] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[14475.673385] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[14475.675326] wlp3s0: authenticated
[14475.675469] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[14475.675472] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[14475.685412] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[14475.688714] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[14475.688821] wlp3s0: associated
[14475.688852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[15032.608574] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[15033.164064] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[15033.172160] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[15033.226948] PM: Syncing filesystems ... done.
[15033.252077] PM: Preparing system for mem sleep
[15033.252228] bbswitch: enabling discrete graphics
[15033.453373] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15033.454866] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15033.455984] PM: Entering mem sleep
[15033.455995] Suspending console(s) (use no_console_suspend to debug)
[15033.456286] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15033.459452] sd 0:0:0:0: [sda] Stopping disk
[15034.197559] PM: suspend of devices complete after 741.564 msecs
[15034.217539] PM: late suspend of devices complete after 19.978 msecs
[15034.218197] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15034.237804] PM: noirq suspend of devices complete after 20.266 msecs
[15034.238043] ACPI: Preparing to enter system sleep state S3
[15034.279977] ACPI : EC: EC stopped
[15034.279977] PM: Saving platform NVS memory
[15034.280017] Disabling non-boot CPUs ...
[15034.280045] intel_pstate CPU 1 exiting
[15034.281304] kvm: disabling virtualization on CPU1
[15034.281316] smpboot: CPU 1 is now offline
[15034.281718] intel_pstate CPU 2 exiting
[15034.283006] kvm: disabling virtualization on CPU2
[15034.283016] smpboot: CPU 2 is now offline
[15034.283519] intel_pstate CPU 3 exiting
[15034.284732] kvm: disabling virtualization on CPU3
[15034.284740] smpboot: CPU 3 is now offline
[15034.289471] ACPI: Low-level resume complete
[15034.289592] ACPI : EC: EC started
[15034.289595] PM: Restoring platform NVS memory
[15034.290379] Enabling non-boot CPUs ...
[15034.290508] x86: Booting SMP configuration:
[15034.290512] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15034.304944] kvm: enabling virtualization on CPU1
[15034.307456]  cache: parent cpu1 should not be sleeping
[15034.308083] CPU1 is up
[15034.308161] smpboot: Booting Node 0 Processor 2 APIC 0x1
[15034.322543] kvm: enabling virtualization on CPU2
[15034.325036]  cache: parent cpu2 should not be sleeping
[15034.325438] CPU2 is up
[15034.325491] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15034.339680] kvm: enabling virtualization on CPU3
[15034.342243]  cache: parent cpu3 should not be sleeping
[15034.342661] CPU3 is up
[15034.357013] ACPI: Waking up from system sleep state S3
[15034.481161] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15034.493276] PM: noirq resume of devices complete after 12.471 msecs
[15034.494436] PM: early resume of devices complete after 1.100 msecs
[15034.494860] usb usb1: root hub lost power or was reset
[15034.494867] usb usb2: root hub lost power or was reset
[15034.496701] ath: phy0: ASPM enabled: 0x43
[15034.496706] rtc_cmos 00:04: System wakeup disabled by ACPI
[15034.502006] sd 0:0:0:0: [sda] Starting disk
[15034.515059] r8169 0000:02:00.0 enp2s0: link down
[15034.842498] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15034.842542] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15034.842613] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[15034.845518] ata2.00: configured for UDMA/133
[15034.846187] ata1.00: configured for UDMA/133
[15034.846202] ahci 0000:00:1f.2: port does not support device sleep
[15035.162428] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[15035.422314] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[15035.682352] usb 1-6: reset full-speed USB device number 52 using xhci_hcd
[15035.822515] usb 1-6: device firmware changed
[15035.822677] PM: resume of devices complete after 1328.469 msecs
[15035.822915] PM: Finishing wakeup.
[15035.822917] Restarting tasks ... 
[15035.822978] usb 1-6: USB disconnect, device number 52
[15035.830817] done.
[15035.857778] bbswitch: disabling discrete graphics
[15035.857790] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[15035.963417] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15036.002099] usb 1-6: new full-speed USB device number 53 using xhci_hcd
[15036.004197] r8169 0000:02:00.0 enp2s0: link down
[15036.004256] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15036.005192] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15036.021187] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15036.117423] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15037.033766] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[15037.046368] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[15037.048233] wlp3s0: authenticated
[15037.048404] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[15037.048409] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[15037.051961] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[15037.055409] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[15037.055510] wlp3s0: associated
[15037.055538] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[15041.141257] Bluetooth: Can't get version to change to load ram patch err
[15041.141261] Bluetooth: Loading patch file failed
[15041.141279] ath3k: probe of 1-6:1.0 failed with error -110
[15193.405764] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[15193.937242] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[15193.944700] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[15193.995798] PM: Syncing filesystems ... done.
[15194.026929] PM: Preparing system for mem sleep
[15194.027096] bbswitch: enabling discrete graphics
[15194.229851] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15194.231415] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15194.232581] PM: Entering mem sleep
[15194.232594] Suspending console(s) (use no_console_suspend to debug)
[15194.233046] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15194.236207] sd 0:0:0:0: [sda] Stopping disk
[15194.994365] PM: suspend of devices complete after 761.771 msecs
[15195.014293] PM: late suspend of devices complete after 19.929 msecs
[15195.014884] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15195.034618] PM: noirq suspend of devices complete after 20.327 msecs
[15195.034857] ACPI: Preparing to enter system sleep state S3
[15195.076790] ACPI : EC: EC stopped
[15195.076791] PM: Saving platform NVS memory
[15195.076831] Disabling non-boot CPUs ...
[15195.076858] intel_pstate CPU 1 exiting
[15195.078009] kvm: disabling virtualization on CPU1
[15195.078016] smpboot: CPU 1 is now offline
[15195.078508] intel_pstate CPU 2 exiting
[15195.079633] kvm: disabling virtualization on CPU2
[15195.079638] smpboot: CPU 2 is now offline
[15195.079855] intel_pstate CPU 3 exiting
[15195.080971] kvm: disabling virtualization on CPU3
[15195.080975] smpboot: CPU 3 is now offline
[15195.085205] ACPI: Low-level resume complete
[15195.085327] ACPI : EC: EC started
[15195.085329] PM: Restoring platform NVS memory
[15195.086105] Enabling non-boot CPUs ...
[15195.086235] x86: Booting SMP configuration:
[15195.086239] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15195.100653] kvm: enabling virtualization on CPU1
[15195.103264]  cache: parent cpu1 should not be sleeping
[15195.103896] CPU1 is up
[15195.103974] smpboot: Booting Node 0 Processor 2 APIC 0x1
[15195.118477] kvm: enabling virtualization on CPU2
[15195.121066]  cache: parent cpu2 should not be sleeping
[15195.121461] CPU2 is up
[15195.121515] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15195.135704] kvm: enabling virtualization on CPU3
[15195.138255]  cache: parent cpu3 should not be sleeping
[15195.138631] CPU3 is up
[15195.153173] ACPI: Waking up from system sleep state S3
[15195.277411] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15195.289639] PM: noirq resume of devices complete after 12.733 msecs
[15195.291030] PM: early resume of devices complete after 1.330 msecs
[15195.291201] usb usb1: root hub lost power or was reset
[15195.291207] usb usb2: root hub lost power or was reset
[15195.293329] rtc_cmos 00:04: System wakeup disabled by ACPI
[15195.293344] ath: phy0: ASPM enabled: 0x43
[15195.300874] sd 0:0:0:0: [sda] Starting disk
[15195.311494] r8169 0000:02:00.0 enp2s0: link down
[15195.639053] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[15195.648868] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15195.648908] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15195.651881] ata2.00: configured for UDMA/133
[15195.652590] ata1.00: configured for UDMA/133
[15195.652606] ahci 0000:00:1f.2: port does not support device sleep
[15195.958908] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[15196.218793] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[15196.478801] usb 1-6: reset full-speed USB device number 53 using xhci_hcd
[15196.620597] PM: resume of devices complete after 1329.795 msecs
[15196.620797] PM: Finishing wakeup.
[15196.620799] Restarting tasks ... done.
[15196.658555] bbswitch: disabling discrete graphics
[15196.658562] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[15196.789691] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15196.830666] r8169 0000:02:00.0 enp2s0: link down
[15196.830708] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15196.831471] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15196.847437] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15196.963245] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15197.875566] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[15197.888202] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[15197.890072] wlp3s0: authenticated
[15197.890222] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[15197.890225] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[15197.898405] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[15197.901799] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[15197.901906] wlp3s0: associated
[15197.901933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[15860.800399] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[15861.334597] wlp3s0: deauthenticating from 00:15:e9:cf:ab:80 by local choice (Reason: 3=DEAUTH_LEAVING)
[15861.354021] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[15861.408597] PM: Syncing filesystems ... done.
[15861.435699] PM: Preparing system for mem sleep
[15861.435848] bbswitch: enabling discrete graphics
[15861.638248] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15861.639682] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15861.640795] PM: Entering mem sleep
[15861.640806] Suspending console(s) (use no_console_suspend to debug)
[15861.641149] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15861.644414] sd 0:0:0:0: [sda] Stopping disk
[15862.372869] PM: suspend of devices complete after 732.059 msecs
[15862.392883] PM: late suspend of devices complete after 20.010 msecs
[15862.393632] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15862.413109] PM: noirq suspend of devices complete after 20.226 msecs
[15862.413348] ACPI: Preparing to enter system sleep state S3
[15862.455835] ACPI : EC: EC stopped
[15862.455836] PM: Saving platform NVS memory
[15862.455876] Disabling non-boot CPUs ...
[15862.455893] intel_pstate CPU 1 exiting
[15862.457045] kvm: disabling virtualization on CPU1
[15862.457050] smpboot: CPU 1 is now offline
[15862.457335] intel_pstate CPU 2 exiting
[15862.458474] kvm: disabling virtualization on CPU2
[15862.458483] smpboot: CPU 2 is now offline
[15862.458746] intel_pstate CPU 3 exiting
[15862.459849] kvm: disabling virtualization on CPU3
[15862.459854] smpboot: CPU 3 is now offline
[15862.464074] ACPI: Low-level resume complete
[15862.464196] ACPI : EC: EC started
[15862.464199] PM: Restoring platform NVS memory
[15862.464971] Enabling non-boot CPUs ...
[15862.465101] x86: Booting SMP configuration:
[15862.465105] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15862.479506] kvm: enabling virtualization on CPU1
[15862.482024]  cache: parent cpu1 should not be sleeping
[15862.482668] CPU1 is up
[15862.482745] smpboot: Booting Node 0 Processor 2 APIC 0x1
[15862.497221] kvm: enabling virtualization on CPU2
[15862.499814]  cache: parent cpu2 should not be sleeping
[15862.500220] CPU2 is up
[15862.500277] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15862.514467] kvm: enabling virtualization on CPU3
[15862.517018]  cache: parent cpu3 should not be sleeping
[15862.517448] CPU3 is up
[15862.531803] ACPI: Waking up from system sleep state S3
[15862.656163] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15862.668222] PM: noirq resume of devices complete after 12.414 msecs
[15862.669582] PM: early resume of devices complete after 1.300 msecs
[15862.669812] usb usb1: root hub lost power or was reset
[15862.669820] usb usb2: root hub lost power or was reset
[15862.671773] ath: phy0: ASPM enabled: 0x43
[15862.671993] rtc_cmos 00:04: System wakeup disabled by ACPI
[15862.676864] sd 0:0:0:0: [sda] Starting disk
[15862.689985] r8169 0000:02:00.0 enp2s0: link down
[15863.017462] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15863.017511] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15863.017577] usb 1-6: reset full-speed USB device number 53 using xhci_hcd
[15863.020437] ata2.00: configured for UDMA/133
[15863.021108] ata1.00: configured for UDMA/133
[15863.021125] ahci 0000:00:1f.2: port does not support device sleep
[15863.277385] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[15863.597267] usb 1-3: reset full-speed USB device number 23 using xhci_hcd
[15863.857228] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[15864.018814] PM: resume of devices complete after 1349.463 msecs
[15864.018991] PM: Finishing wakeup.
[15864.018992] Restarting tasks ... done.
[15864.057221] bbswitch: disabling discrete graphics
[15864.057230] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[15864.168383] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15864.209144] r8169 0000:02:00.0 enp2s0: link down
[15864.209180] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[15864.209760] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15864.225838] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15864.352759] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15865.259640] wlp3s0: authenticate with 00:15:e9:cf:ab:80
[15865.272285] wlp3s0: send auth to 00:15:e9:cf:ab:80 (try 1/3)
[15865.274195] wlp3s0: authenticated
[15865.274366] ath9k 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[15865.274370] ath9k 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[15865.276867] wlp3s0: associate with 00:15:e9:cf:ab:80 (try 1/3)
[15865.280224] wlp3s0: RX AssocResp from 00:15:e9:cf:ab:80 (capab=0x471 status=0 aid=3)
[15865.280330] wlp3s0: associated
[15865.280353] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

marmistrz · 2016-03-26 18:43:41

Besides, there are digits missing in the date my Cinnamon screen lock

Arch Linux

#1 2016-03-19 17:11:31

Cinnamon animations not so smooth as on Linux Mint

#2 2016-03-19 17:18:02

Re: Cinnamon animations not so smooth as on Linux Mint

#3 2016-03-19 17:50:31

Re: Cinnamon animations not so smooth as on Linux Mint

#4 2016-03-19 18:21:41

Re: Cinnamon animations not so smooth as on Linux Mint

#5 2016-03-19 18:34:34

Re: Cinnamon animations not so smooth as on Linux Mint

#6 2016-03-19 21:21:18

Re: Cinnamon animations not so smooth as on Linux Mint

#7 2016-03-20 08:16:38

Re: Cinnamon animations not so smooth as on Linux Mint

#8 2016-03-21 21:09:20

Re: Cinnamon animations not so smooth as on Linux Mint

#9 2016-03-23 07:54:34

Re: Cinnamon animations not so smooth as on Linux Mint

#10 2016-03-23 10:24:28

Re: Cinnamon animations not so smooth as on Linux Mint

#11 2016-03-23 15:46:27

Re: Cinnamon animations not so smooth as on Linux Mint

#12 2016-03-23 16:21:57

Re: Cinnamon animations not so smooth as on Linux Mint

#13 2016-03-26 18:10:53

Re: Cinnamon animations not so smooth as on Linux Mint

#14 2016-03-26 18:43:41

Re: Cinnamon animations not so smooth as on Linux Mint

Board footer