You are not logged in.
Hi guys !
I have some troubles during installation to make my wifi working !
Dmesg
[ 3.896366] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2
[ 3.901505] iwlwifi 0000:04:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[ 3.961749] iwlwifi 0000:04:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[ 3.962870] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3.963132] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 4.171456] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.174877] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[ 4.311413] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 4.311674] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 4.520789] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 4.521032] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1959.055063] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[ 1959.729626] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1959.729891] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1959.916115] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1959.916380] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3158.736485] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3158.736756] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3159.053379] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3159.053660] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3340.126491] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[ 3340.915661] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3340.915942] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3341.121777] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 3341.122050] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 7730.196924] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[ 7730.744547] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 7730.744802] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 7730.964619] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 7730.964876] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 9247.798496] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[ 9248.587903] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 9248.588183] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 9248.907934] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 9248.908192] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[11287.451757] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[11288.219355] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[11288.219613] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[11288.449238] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[11288.449518] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[15557.879808] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[15558.529890] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[15558.530152] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[15558.761917] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[15558.762175] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
It say "Direct firmware load for iwlwifi-7260-17.ucode failed with error -2"
If i try modinfo iwlwifi i discover that i have not the -17.ucode firmware:
filename: /lib/modules/4.4.9-1-lts/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko.gz
firmware: iwlwifi-100-5.ucode
firmware: iwlwifi-1000-5.ucode
firmware: iwlwifi-135-6.ucode
firmware: iwlwifi-105-6.ucode
firmware: iwlwifi-2030-6.ucode
firmware: iwlwifi-2000-6.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-5.ucode
firmware: iwlwifi-6000g2b-6.ucode
firmware: iwlwifi-6000g2a-5.ucode
firmware: iwlwifi-6050-5.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-7265D-13.ucode
firmware: iwlwifi-7265-13.ucode
firmware: iwlwifi-3160-13.ucode
firmware: iwlwifi-7260-13.ucode
firmware: iwlwifi-8000-13.ucode
So i download and place it in /lib/firmware
Here is my firmwares in /lib/firmware:
iwlwifi-100-5.ucode
iwlwifi-1000-3.ucode
iwlwifi-1000-5.ucode
iwlwifi-105-6.ucode
iwlwifi-135-6.ucode
iwlwifi-2000-6.ucode
iwlwifi-2030-6.ucode
iwlwifi-3160-10.ucode
iwlwifi-3160-12.ucode
iwlwifi-3160-13.ucode
iwlwifi-3160-16.ucode
iwlwifi-3160-7.ucode
iwlwifi-3160-8.ucode
iwlwifi-3160-9.ucode
iwlwifi-3168-21.ucode
iwlwifi-3945-2.ucode
iwlwifi-4965-2.ucode
iwlwifi-5000-1.ucode
iwlwifi-5000-2.ucode
iwlwifi-5000-5.ucode
iwlwifi-5150-2.ucode
iwlwifi-6000-4.ucode
iwlwifi-6000g2a-5.ucode
iwlwifi-6000g2a-6.ucode
iwlwifi-6000g2b-5.ucode
iwlwifi-6000g2b-6.ucode
iwlwifi-6050-4.ucode
iwlwifi-6050-5.ucode
iwlwifi-7260-10.ucode
iwlwifi-7260-12.ucode
iwlwifi-7260-13.ucode
iwlwifi-7260-16.ucode
iwlwifi-7260-17.ucode ------> Its him :D
iwlwifi-7260-7.ucode
iwlwifi-7260-8.ucode
iwlwifi-7260-9.ucode
iwlwifi-7265-10.ucode
iwlwifi-7265-12.ucode
iwlwifi-7265-13.ucode
iwlwifi-7265-16.ucode
iwlwifi-7265-8.ucode
iwlwifi-7265-9.ucode
iwlwifi-7265D-10.ucode
iwlwifi-7265D-12.ucode
iwlwifi-7265D-13.ucode
iwlwifi-7265D-16.ucode
iwlwifi-7265D-21.ucode
iwlwifi-8000C-13.ucode
iwlwifi-8000C-16.ucode
iwlwifi-8000C-21.ucode
iwlwifi-8265-21.ucode
Although i put my .ucode in /lib/firmware, i cant see him in 'modinfo iwlwifi'.
I may forgot to load the file but i dont know how i could do that... x)
So im searching actively on the internet, but im really traped with this wifi so i create this topic, i'll keep uploading what i do here.
If you have any idea, i'll be thankful !
Have a good day !
Last edited by Hackedia (2016-05-17 13:53:39)
Offline
See where it says
iwlwifi 0000:04:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
That means it loaded the firmware just fine. It just didn't find the first one it looked for.
Online
Hi Scimmia,
Okay thanks,
The fact is, i cant set up my wifi card, i though that was because of the drivers and firmware, but it seems not !
I try to disable NetworkManager to avoid any problems (solution i found in this forum for the same problem) but it didnt work for me.
So im completely lost ^^, i read the wireless wiki one more time in case, but i found no wiki troubleshooting "ip link set up" troubles.
In dmesg output its write "wlp4s0 : link is not ready".
I look at the "rfkill list" but nothing is hard or soft blocked !
Last edited by Hackedia (2016-05-21 12:47:26)
Offline
Hi guys !
Im installing Archlinux and try to set up my wifi,
But my interface dont want to set UP,
I dont know why but there is a conflict with p2p :
wpa_supplicant -B -i wlp4s0 -c /etc/wpa_supplicant/wpa_supplicant-wlp4s0.conf
Successfully initialized wpa_supplicant
Could not read interface p2p-dev-wlp4s0 flags: No such device
nl80211: Could not set 'p2p-dev-wlp4s0' UP
nl80211: deinit ifname=p2p-dev-wlp4s0 disabled_11b_rates=0
p2p-dev-wlp4s0
P2P: Failed to enable P2P Device interface
Nothing is noticed in the archlinux's wiki's installation,
I dont found a solution on internet working for me,
I dont know what to do !
Someone have an idea (even a little ^^) about that ?
Great thanks and have a good day !
Offline