External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

felixwatts · 2016-07-23 08:44:32

Hi,

I have a new external usb hard drive. When I connect it the device does not appear as a /dev/sd* nor in /dev/disk/**. After physically connecting the drive I get

lsusb

Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 002: ID 045b:0209 Hitachi, Ltd 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

fdisk -l

Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0002043c

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1  *         2048   1050623   1048576  512M  b W95 FAT32
/dev/sda2         1050624  34605055  33554432   16G 83 Linux
/dev/sda3        34605056 147912703 113307648   54G 83 Linux
/dev/sda4       147912704 156301311   8388608    4G 82 Linux swap / Solaris

dmesg

...
[  309.699703] usb 1-1.4: USB disconnect, device number 3
[  309.928753] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[  310.029456] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C016.0002/input/input12
[  310.029813] hid-generic 0003:046D:C016.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.4/input0
[  311.751001] usb 1-1.4: USB disconnect, device number 4
[  311.978698] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[  312.079621] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C016.0003/input/input13
[  312.079984] hid-generic 0003:046D:C016.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.4/input0

Any ideas what the problem could be?

Thanks!
Felix

x33a · 2016-07-23 19:03:04

I see 2 Hitachi devices in the lsusb output. Is none of them the disk of your interest? What is the output of

lsusb -vvv

felixwatts · 2016-07-23 19:11:14

[EDIT] added more lsusb output

Hi X33a,

Thanks for your help. Yea I guess that is the disk but its somehow not assigned a file in /dev/

lsusb -vvv


Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x045b Hitachi, Ltd
  idProduct          0x0210 
  bcdDevice            1.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes           19
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Feedback
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               8
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             4
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    200 milli Ampere
  bHubDecLat          0.1 micro seconds
  wHubDelay           705 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
   Port 3: 0000.02a0 5Gbps power Rx.Detect
   Port 4: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           42
  bNumDeviceCaps          3
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      HIRD Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat          10 micro seconds
  Container ID Device Capability:
    bLength                20
    bDescriptorType        16
    bDevCapabilityType      4
    bReserved               0
    ContainerID             {00000000-0000-0000-0000-000000000000}
Device Status:     0x000d
  Self Powered
  U1 Enabled
  U2 Enabled

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.06
  iManufacturer           3 Linux 4.6.4-1-ARCH xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:14.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             1
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.0263 5Gbps power suspend enable connect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x02
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat         512 micro seconds
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc016 Optical Wheel Mouse
  bcdDevice            3.40
  iManufacturer           1 Logitech
  iProduct                2 Optical USB Mouse
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 002: ID 045b:0209 Hitachi, Ltd 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x045b Hitachi, Ltd
  idProduct          0x0209 
  bcdDevice            1.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0029
    Per-port power switching
    Per-port overcurrent protection
    TT think time 16 FS bits
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0303 lowspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           42
  bNumDeviceCaps          3
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      HIRD Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat          10 micro seconds
  Container ID Device Capability:
    bLength                20
    bDescriptorType        16
    bDevCapabilityType      4
    bReserved               0
    ContainerID             {00000000-0000-0000-0000-000000000000}
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.06
  iManufacturer           3 Linux 4.6.4-1-ARCH xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:14.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
Device Status:     0x0001
  Self Powered

Last edited by felixwatts (2016-07-23 19:14:59)

R00KIE · 2016-07-23 20:23:39

Disconnect the drive of interest then reboot.

After rebooting plug the drive of interest and then post the output of dmesg.

felixwatts · 2016-07-23 20:32:15

dmesg

[    0.000000] Linux version 4.6.4-1-ARCH (builduser@tobias) (gcc version 6.1.1 20160707 (GCC) ) #1 SMP PREEMPT Mon Jul 11 19:12:32 CEST 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b3820945-13ad-467f-9fc0-0f6af0e903a1 rw quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b9701fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9702000-0x00000000b9731fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9732000-0x00000000b9785fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9786000-0x00000000b9896fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9897000-0x00000000b9b8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9b8e000-0x00000000b9b8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9b8f000-0x00000000b9bd0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9bd1000-0x00000000b9d40fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9d41000-0x00000000b9ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./J1900N-D3V, BIOS F4 05/06/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BA000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask F00000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE
[    0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE
[    0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE
[    0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE
[    0.000000] BRK [0x01b53000, 0x01b53fff] PGTABLE
[    0.000000] BRK [0x01b54000, 0x01b54fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x378ea000-0x37c6cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000B980C078 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B9817550 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20160108/tbfadt-623)
[    0.000000] ACPI: DSDT 0x00000000B980C188 00B3C1 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000B9896F80 000040
[    0.000000] ACPI: APIC 0x00000000B9817660 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B98176E8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000B9817730 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: LPIT 0x00000000B9817770 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
[    0.000000] ACPI: HPET 0x00000000B9817878 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000B98178B0 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B9818018 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B98182A8 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000B9818428 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fff3000-0x23fff6fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000b9701fff]
[    0.000000]   node   0: [mem 0x00000000b9732000-0x00000000b9785fff]
[    0.000000]   node   0: [mem 0x00000000b9b8e000-0x00000000b9b8efff]
[    0.000000]   node   0: [mem 0x00000000b9bd1000-0x00000000b9d40fff]
[    0.000000]   node   0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.000000] On node 0 totalpages: 2070377
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11808 pages used for memmap
[    0.000000]   DMA32 zone: 755661 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0xcb])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0xe])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x8c])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl level lint[0x6a])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9702000-0xb9731fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9786000-0xb9896fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9897000-0xb9b8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9b8f000-0xb9bd0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9d41000-0xb9ff9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88023fc00000 s93464 r8192 d29416 u524288
[    0.000000] pcpu-alloc: s93464 r8192 d29416 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2038004
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b3820945-13ad-467f-9fc0-0f6af0e903a1 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8068284K/8281508K available (5935K kernel code, 974K rwdata, 1796K rodata, 1224K init, 1152K bss, 213224K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Maximum core-clock to bus-clock ratio: 0x18
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 1996800 KHz
[    0.000000] lapic_timer_frequency = 277333
[    0.000000] tsc: Detected 1996.800 MHz processor
[    0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
[    0.000046] pid_max: default: 32768 minimum: 301
[    0.000059] ACPI: Core revision 20160108
[    0.020739] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.020786] Security Framework initialized
[    0.020791] Yama: becoming mindful.
[    0.021743] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.025434] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027096] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027119] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027549] CPU: Physical Processor ID: 0
[    0.027554] CPU: Processor Core ID: 0
[    0.027561] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.027563] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.027572] mce: CPU supports 6 MCE banks
[    0.027584] CPU0: Thermal monitoring enabled (TM1)
[    0.027590] process: using mwait in idle threads
[    0.027596] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.027599] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.027940] Freeing SMP alternatives memory: 24K (ffffffff81a27000 - ffffffff81a2d000)
[    0.029594] ftrace: allocating 23494 entries in 92 pages
[    0.042720] smpboot: Max logical packages: 1
[    0.042726] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.043478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.076503] TSC deadline timer enabled
[    0.076509] smpboot: CPU0: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.076530] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.076545] ... version:                3
[    0.076548] ... bit width:              40
[    0.076550] ... generic registers:      2
[    0.076553] ... value mask:             000000ffffffffff
[    0.076555] ... max period:             000000ffffffffff
[    0.076557] ... fixed-purpose events:   3
[    0.076559] ... event mask:             0000000700000003
[    0.096742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113282] x86: Booting SMP configuration:
[    0.113286] .... node  #0, CPUs:      #1 #2 #3
[    0.392360] x86: Booted up 1 node, 4 CPUs
[    0.392369] smpboot: Total of 4 processors activated (15988.76 BogoMIPS)
[    0.394214] devtmpfs: initialized
[    0.394389] x86/mm: Memory block size: 128MB
[    0.402171] PM: Registering ACPI NVS region [mem 0xb9786000-0xb9896fff] (1118208 bytes)
[    0.402388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.402525] pinctrl core: initialized pinctrl subsystem
[    0.402616] RTC time:  4:29:00, date: 07/24/16
[    0.402892] NET: Registered protocol family 16
[    0.415541] cpuidle: using governor ladder
[    0.428893] cpuidle: using governor menu
[    0.428983] ACPI: bus type PCI registered
[    0.428990] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.429141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.429147] PCI: not using MMCONFIG
[    0.429150] PCI: Using configuration type 1 for base access
[    0.442642] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.443239] ACPI: Added _OSI(Module Device)
[    0.443244] ACPI: Added _OSI(Processor Device)
[    0.443247] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.443249] ACPI: Added _OSI(Processor Aggregator Device)
[    0.454427] ACPI: Dynamic OEM Table Load:
[    0.454440] ACPI: SSDT 0xFFFF880235C65C00 0003D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.455544] ACPI: Dynamic OEM Table Load:
[    0.455554] ACPI: SSDT 0xFFFF880237016800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.457079] ACPI: Dynamic OEM Table Load:
[    0.457088] ACPI: SSDT 0xFFFF880235C35A00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.458144] ACPI: Dynamic OEM Table Load:
[    0.458152] ACPI: SSDT 0xFFFF880235CFD480 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.460829] ACPI: Interpreter enabled
[    0.460869] ACPI: (supports S0 S3 S4 S5)
[    0.460873] ACPI: Using IOAPIC for interrupt routing
[    0.460934] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.462562] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.462595] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.474510] ACPI: Power Resource [USBC] (on)
[    0.476380] ACPI: Power Resource [PLPE] (on)
[    0.476754] ACPI: Power Resource [PLPE] (on)
[    0.485340] ACPI: Power Resource [CLK0] (on)
[    0.485434] ACPI: Power Resource [CLK1] (on)
[    0.559937] ACPI: Power Resource [FN00] (off)
[    0.561060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.561072] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.561365] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[    0.561369] _OSC request data: 1 1f 0
[    0.561377] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.562110] PCI host bridge to bus 0000:00
[    0.562117] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.562121] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.562125] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.562129] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.562133] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.562137] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.562141] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.562145] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0816ffe window]
[    0.562149] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.562162] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.562379] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.562395] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.562408] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.562420] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.562640] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    0.562660] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
[    0.562672] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
[    0.562682] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
[    0.562693] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
[    0.562704] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
[    0.562715] pci 0000:00:13.0: reg 0x24: [mem 0xd0816000-0xd08167ff]
[    0.562766] pci 0000:00:13.0: PME# supported from D3hot
[    0.562949] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.562970] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
[    0.563036] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.563176] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.563264] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.563290] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    0.563305] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    0.563413] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.563599] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.563623] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
[    0.563701] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.563896] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.563963] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.564146] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.564213] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.564396] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    0.564463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.564647] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    0.564714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.564901] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.565148] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.565184] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
[    0.565258] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.565642] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.565665] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.565695] pci 0000:01:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
[    0.565715] pci 0000:01:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref]
[    0.565812] pci 0000:01:00.0: supports D1 D2
[    0.565817] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.565881] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.570478] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.570488] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.570496] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.570657] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.570681] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.570711] pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
[    0.570731] pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
[    0.570827] pci 0000:02:00.0: supports D1 D2
[    0.570831] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.570895] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.577157] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.577167] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.577175] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.577327] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[    0.577456] pci 0000:03:00.0: supports D1 D2
[    0.577460] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.577504] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.577575] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.577723] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.577849] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.579442] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.579578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.579712] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.579846] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.579979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.580114] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.580257] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.580391] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.582625] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.582869] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.582874] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.582881] vgaarb: loaded
[    0.582884] vgaarb: bridge control possible 0000:00:02.0
[    0.583157] PCI: Using ACPI for IRQ routing
[    0.589162] PCI: pci_cache_line_size set to 64 bytes
[    0.589219] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.589223] e820: reserve RAM buffer [mem 0xb9702000-0xbbffffff]
[    0.589226] e820: reserve RAM buffer [mem 0xb9786000-0xbbffffff]
[    0.589230] e820: reserve RAM buffer [mem 0xb9b8f000-0xbbffffff]
[    0.589233] e820: reserve RAM buffer [mem 0xb9d41000-0xbbffffff]
[    0.589236] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.589448] NetLabel: Initializing
[    0.589451] NetLabel:  domain hash size = 128
[    0.589453] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.589477] NetLabel:  unlabeled traffic allowed by default
[    0.589607] clocksource: Switched to clocksource refined-jiffies
[    0.600500] VFS: Disk quotas dquot_6.6.0
[    0.600558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.600762] pnp: PnP ACPI init
[    0.600870] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.601113] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.601119] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.601124] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.601128] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.601132] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.601140] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601457] system 00:02: [io  0x0a00-0x0a2f] has been reserved
[    0.601463] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.601467] system 00:02: [io  0x0a40-0x0a4f] has been reserved
[    0.601474] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601986] pnp 00:03: [dma 0 disabled]
[    0.602091] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.602590] pnp 00:04: [dma 0 disabled]
[    0.602689] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.602797] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.603492] pnp 00:06: [dma 0 disabled]
[    0.603741] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.604212] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.604218] system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.604223] system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.604227] system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.604232] system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    0.604236] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.604240] system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.604244] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.604249] system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.604256] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.606257] pnp: PnP ACPI: found 8 devices
[    0.615795] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.615825] clocksource: Switched to clocksource acpi_pm
[    0.615852] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.615864] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.615892] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.615897] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 add_align 100000
[    0.615902] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-04] add_size 200000 add_align 100000
[    0.615912] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.615917] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.615922] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[    0.615939] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615945] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615949] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615954] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615959] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.615963] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.615968] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615972] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615977] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.615981] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.615986] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615991] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.615995] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.616000] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.616004] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.616008] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.616022] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616027] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616036] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616040] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616047] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
[    0.616051] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
[    0.616059] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616064] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616070] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
[    0.616074] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
[    0.616082] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616087] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616093] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
[    0.616099] pci 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[    0.616108] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
[    0.616112] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
[    0.616121] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616126] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616132] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
[    0.616136] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
[    0.616145] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616149] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616157] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616162] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616170] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.616175] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.616180] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.616185] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.616192] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.616201] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.616206] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.616212] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.616221] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.616243] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.616247] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.616258] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.616262] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.616274] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.616278] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.616282] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.616285] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.616289] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.616293] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.616297] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.616301] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0816ffe window]
[    0.616305] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.616309] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.616313] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.616317] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.616321] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.616325] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.616383] NET: Registered protocol family 2
[    0.616735] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.617021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.617371] TCP: Hash tables configured (established 65536 bind 65536)
[    0.617453] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.617527] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.617688] NET: Registered protocol family 1
[    0.617722] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.618053] PCI: CLS 64 bytes, default 64
[    0.618159] Unpacking initramfs...
[    0.718304] Freeing initrd memory: 3596K (ffff8800378ea000 - ffff880037c6d000)
[    0.718321] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.718326] software IO TLB [mem 0xb5702000-0xb9702000] (64MB) mapped at [ffff8800b5702000-ffff8800b9701fff]
[    0.718558] Scanning for low memory corruption every 60 seconds
[    0.719258] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.719950] Initialise system trusted keyring
[    0.720177] workingset: timestamp_bits=38 max_order=21 bucket_order=0
[    0.723815] zbud: loaded
[    0.724326] Key type big_key registered
[    0.725112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.725216] io scheduler noop registered
[    0.725225] io scheduler deadline registered
[    0.725313] io scheduler cfq registered (default)
[    0.726162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.726181] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.726214] efifb: probing for efifb
[    0.726222] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[    0.726225] efifb: mode is 640x480x1, linelength=80, pages=1
[    0.726227] efifb: scrolling: redraw
[    0.726231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.728991] Console: switching to colour frame buffer device 80x30
[    0.731601] fb0: EFI VGA frame buffer device
[    0.731621] intel_idle: MWAIT substates: 0x33000020
[    0.731624] intel_idle: v0.4.1 model 0x37
[    0.731937] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.732003] GHES: HEST is not enabled!
[    0.732129] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.752939] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.773778] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.774428] hpet: number irqs doesn't agree with number of timers
[    0.774478] Linux agpgart interface v0.103
[    0.775112] rtc_cmos 00:00: RTC can wake from S4
[    0.775301] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.775333] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    0.775355] Intel P-state driver initializing.
[    0.836262] ledtrig-cpu: registered to indicate activity on CPUs
[    0.837452] NET: Registered protocol family 10
[    0.837944] NET: Registered protocol family 17
[    0.838491] microcode: CPU0 sig=0x30678, pf=0x4, revision=0x808
[    0.838517] microcode: CPU1 sig=0x30678, pf=0x4, revision=0x808
[    0.838548] microcode: CPU2 sig=0x30678, pf=0x4, revision=0x808
[    0.838577] microcode: CPU3 sig=0x30678, pf=0x4, revision=0x808
[    0.838689] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.839180] registered taskstats version 1
[    0.839209] Loading compiled-in X.509 certificates
[    0.839266] zswap: loaded using pool lzo/zbud
[    0.840111]   Magic number: 8:158:465
[    0.840344] rtc_cmos 00:00: setting system clock to 2016-07-24 04:29:00 UTC (1469334540)
[    0.840547] PM: Hibernation image not present or could not be loaded.
[    0.843882] Freeing unused kernel memory: 1224K (ffffffff818f5000 - ffffffff81a27000)
[    0.843890] Write protecting the kernel read-only data: 8192k
[    0.844421] Freeing unused kernel memory: 192K (ffff8800015d0000 - ffff880001600000)
[    0.846387] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000)
[    0.866311] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.940591] sdhci: Secure Digital Host Controller Interface driver
[    0.940599] sdhci: Copyright(c) Pierre Ossman
[    0.954111] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.954116] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.954319] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.972414] ACPI: bus type USB registered
[    0.972461] usbcore: registered new interface driver usbfs
[    0.972481] usbcore: registered new interface driver hub
[    0.973216] usbcore: registered new device driver usb
[    0.974602] SCSI subsystem initialized
[    0.976252] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.976275] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.977410] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.977422] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.977537] libata version 3.00 loaded.
[    0.978087] hub 1-0:1.0: USB hub found
[    0.978117] hub 1-0:1.0: 6 ports detected
[    0.979533] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.979551] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.980154] hub 2-0:1.0: USB hub found
[    0.980181] hub 2-0:1.0: 1 port detected
[    0.980837] ahci 0000:00:13.0: version 3.0
[    0.981179] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    0.981188] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part 
[    0.982029] scsi host0: ahci
[    0.982360] scsi host1: ahci
[    0.982532] ata1: SATA max UDMA/133 abar m2048@0xd0816000 port 0xd0816100 irq 88
[    0.982538] ata2: DUMMY
[    1.039227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.186960] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.203611] hub 2-1:1.0: USB hub found
[    1.203884] hub 2-1:1.0: 4 ports detected
[    1.293698] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.294005] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[    1.294013] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.294354] ata1.00: configured for UDMA/133
[    1.294835] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M080 02HD PQ: 0 ANSI: 5
[    1.331443] ata1.00: Enabling discard_zeroes_data
[    1.331506] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.331832] sd 0:0:0:0: [sda] Write Protect is off
[    1.331841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.331958] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.332271] ata1.00: Enabling discard_zeroes_data
[    1.333271]  sda: sda1 sda2 sda3 sda4
[    1.334158] ata1.00: Enabling discard_zeroes_data
[    1.334693] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.360425] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.420386] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.512446] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.534763] hub 1-1:1.0: USB hub found
[    1.534806] hub 1-1:1.0: 4 ports detected
[    1.545202] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.545637] systemd[1]: Detected architecture x86-64.
[    1.547680] systemd[1]: Set hostname to <felix-server>.
[    1.646187] systemd[1]: Created slice User and Session Slice.
[    1.646276] systemd[1]: Reached target Login Prompts.
[    1.646528] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.646660] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.651898] systemd[1]: Created slice System Slice.
[    1.652080] systemd[1]: Listening on Journal Socket.
[    1.664506] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.667059] systemd[1]: Mounting Configuration File System...
[    1.669212] systemd[1]: Mounting POSIX Message Queue File System...
[    1.669329] systemd[1]: Reached target Slices.
[    1.671014] systemd[1]: Mounting Debug File System...
[    1.672352] systemd[1]: Mounting Huge Pages File System...
[    1.673897] systemd[1]: Starting Journal Service...
[    1.675271] systemd[1]: Starting Apply Kernel Variables...
[    1.676740] systemd[1]: Starting Setup Virtual Console...
[    1.678040] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.678270] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.678758] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.678928] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.679236] systemd[1]: Listening on udev Control Socket.
[    1.682763] systemd[1]: Listening on Process Core Dump Socket.
[    1.682824] systemd[1]: Reached target Remote File Systems.
[    1.682923] systemd[1]: Listening on udev Kernel Socket.
[    1.683246] systemd[1]: Created slice system-getty.slice.
[    1.683480] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.683541] systemd[1]: Reached target Encrypted Volumes.
[    1.683638] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.683768] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.683817] systemd[1]: Reached target Paths.
[    1.685911] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    1.686939] systemd[1]: Mounted Debug File System.
[    1.687096] systemd[1]: Mounted Huge Pages File System.
[    1.687140] systemd[1]: Mounted POSIX Message Queue File System.
[    1.689328] systemd[1]: Mounted Configuration File System.
[    1.689801] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.690718] systemd[1]: Started Remount Root and Kernel File Systems.
[    1.692491] systemd[1]: Starting Load/Save Random Seed...
[    1.696602] systemd[1]: Starting udev Coldplug all Devices...
[    1.698248] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.701153] systemd[1]: Started Apply Kernel Variables.
[    1.706141] systemd[1]: Started Load/Save Random Seed.
[    1.721010] tsc: Refined TSC clocksource calibration: 2000.000 MHz
[    1.721017] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85c9bff6, max_idle_ns: 881590591483 ns
[    1.737715] systemd[1]: Started Create Static Device Nodes in /dev.
[    1.738883] systemd[1]: Starting udev Kernel Device Manager...
[    1.738936] systemd[1]: Reached target Local File Systems (Pre).
[    1.770669] systemd[1]: Started udev Coldplug all Devices.
[    1.774820] systemd[1]: Started Setup Virtual Console.
[    1.793792] systemd[1]: Started udev Kernel Device Manager.
[    1.814472] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
[    1.835074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.835083] ACPI: Power Button [PWRB]
[    1.835165] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.835170] ACPI: Sleep Button [SLPB]
[    1.835255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.835260] ACPI: Power Button [PWRF]
[    1.857654] hidraw: raw HID events driver (C) Jiri Kosina
[    1.864013] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.905962] parport_pc 00:06: reported by Plug and Play ACPI
[    1.906071] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[    1.918581] Bluetooth: Core ver 2.21
[    1.918611] NET: Registered protocol family 31
[    1.918614] Bluetooth: HCI device and connection manager initialized
[    1.918621] Bluetooth: HCI socket layer initialized
[    1.918625] Bluetooth: L2CAP socket layer initialized
[    1.918635] Bluetooth: SCO socket layer initialized
[    1.938093] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.952947] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    1.952953] mei_txe 0000:00:1a.0: PCI INT A: not connected
[    1.968329] [drm] Initialized drm 1.1.0 20060810
[    1.970347] Bluetooth: HCI UART driver ver 2.3
[    1.970354] Bluetooth: HCI UART protocol H4 registered
[    1.970356] Bluetooth: HCI UART protocol BCSP registered
[    1.970358] Bluetooth: HCI UART protocol LL registered
[    1.970360] Bluetooth: HCI UART protocol ATH3K registered
[    1.970362] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.970412] Bluetooth: HCI UART protocol Intel registered
[    1.970436] Bluetooth: HCI UART protocol BCM registered
[    1.970438] Bluetooth: HCI UART protocol QCA registered
[    1.970440] Bluetooth: HCI UART protocol AG6XX registered
[    1.970643] systemd[1]: Started Journal Service.
[    1.973276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.973297] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.974130] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c6c000, 40:8d:5c:53:84:0a, XID 0c900800 IRQ 90
[    1.974137] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.974205] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.974216] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.976004] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl at 0xffffc90000c6e000, 40:8d:5c:53:84:08, XID 0c900800 IRQ 91
[    1.976010] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.012889] Adding 4194300k swap on /dev/sda4.  Priority:-1 extents:1 across:4194300k SSFS
[    2.013505] systemd-journald[150]: Received request to flush runtime journal from PID 1
[    2.015493] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[    2.015505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.086554] [drm] Memory usable by graphics device = 2048M
[    2.086561] checking generic (a0000 10000) vs hw (c0000000 10000000)
[    2.086564] fb: switching to inteldrmfb from EFI VGA
[    2.086609] Console: switching to colour dummy device 80x25
[    2.086734] [drm] Replacing VGA console driver
[    2.086951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.086954] [drm] Driver supports precise vblank timestamp query.
[    2.106075] ppdev: user-space parallel port driver
[    2.115806] iTCO_vendor_support: vendor-support=0
[    2.115890] usbcore: registered new interface driver usbhid
[    2.115894] usbhid: USB HID core driver
[    2.117648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.117720] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    2.117967] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.126311] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.127427] r8169 0000:02:00.0 internet0: renamed from eth1
[    2.145727] r8169 0000:01:00.0 net0: renamed from eth0
[    2.145735] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.166647] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.174482] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C016.0001/input/input4
[    2.174657] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.1/input0
[    2.180394] mousedev: PS/2 mouse device common for all mice
[    2.188082] thermal LNXTHERM:00: registered as thermal_zone0
[    2.188088] ACPI: Thermal Zone [TZ01] (27 C)
[    2.190283] acpi device:09: registered as cooling_device6
[    2.190441] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.197073] intel_soc_dts_thermal: request_threaded_irq ret -22
[    2.207377] intel_rapl: Found RAPL domain package
[    2.207384] intel_rapl: Found RAPL domain core
[    2.215241] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.215252] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[    2.215484] fbcon: inteldrmfb (fb0) is primary device
[    2.372141] Console: switching to colour frame buffer device 240x67
[    2.429783] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.486972] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.486980] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.486983] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.486986] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.486989] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.486992] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.486996] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.486999] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.487002] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.487005] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[    2.547854] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    2.553704] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.553846] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.554002] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.554134] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.554286] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.658975] IPv6: ADDRCONF(NETDEV_UP): internet0: link is not ready
[    2.722701] clocksource: Switched to clocksource tsc
[    2.778182] r8169 0000:02:00.0 internet0: link down
[    2.778274] IPv6: ADDRCONF(NETDEV_UP): internet0: link is not ready
[    2.786231] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[    2.911749] r8169 0000:01:00.0 net0: link down
[    2.911752] r8169 0000:01:00.0 net0: link down
[    2.911842] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready
[    4.159962] random: nonblocking pool is initialized
[    5.028599] r8169 0000:01:00.0 net0: link up
[    5.028660] IPv6: ADDRCONF(NETDEV_CHANGE): net0: link becomes ready
[   38.415511] usb 1-1.1: USB disconnect, device number 3
[   38.640019] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd
[   38.740906] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C016.0002/input/input12
[   38.741248] hid-generic 0003:046D:C016.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.1/input0
[   43.030896] usb 1-1.1: USB disconnect, device number 4
[   43.257406] usb 1-1.1: new low-speed USB device number 5 using xhci_hcd
[   43.358042] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C016.0003/input/input13
[   43.358387] hid-generic 0003:046D:C016.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.1/input0

R00KIE · 2016-07-23 23:26:36

Either you are trolling us or your hardware is broken, the output of dmesg doesn't show that you have connected your disk after rebooting, it doesn't even show the detection of any usb attached disk. However it does show you disconnecting and reconnecting your mouse twice.

Edit:
I see you also have a hub connected, make sure you are connecting the disk directly to a usb port on your computer.

Last edited by R00KIE (2016-07-23 23:33:30)

felixwatts · 2016-07-24 06:44:42

A few points:

1) The disk is connecte directly to a USB3 port on the mother board. Ive tried several with the same result.
2) There are also 2 USB2 ports on the front of the PC case which may be the "hub". I'm not sure. Ive also tried connecting the disk there with the same result.
3) The lines in dmesg about disconnecting the mouse happen when I connect the disk.

felixwatts · 2016-07-24 06:51:08

Ah apologies, the dmesg output above was when I attached the disk to the USB2 port on the front of the case. I repeated the procedure using the USB3 port on the motherboard and the output is slightly different:

I should note that when I connect the disk this way it spins up. The rest of the results are the same - no /dev/sdb or anything

dmesg

...
[   16.122169] hrtimer: interrupt took 25212 ns
[   24.310120] usb 1-1.1: USB disconnect, device number 3
[   24.599090] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd
[   24.700067] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C016.0002/input/input12
[   24.700425] hid-generic 0003:046D:C016.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.1/input0
[   28.669096] usb 1-1.1: USB disconnect, device number 4
[   28.899319] usb 1-1.1: new low-speed USB device number 5 using xhci_hcd
[   28.999971] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C016.0003/input/input13
[   29.000330] hid-generic 0003:046D:C016.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.1/input0

Last edited by felixwatts (2016-07-24 06:51:27)

felixwatts · 2016-07-24 06:56:36

one mre thing - If I plug the mouse into the USB2 on the front of the case, then when connecting/disconnecting the external drive to/from the USB3 on the motherboard I get literally no output in dmesg.

R00KIE · 2016-07-24 14:03:40

If it doesn't even register on dmesg I don't know how it can show up in the output of lsusb. If I'm seeing it correctly that disk needs an external adapter to provide power, so not getting enough power from the usb ports should not be an issue.

As a sanity check I would try that disk on another machine and/or with windows just to make sure it is working properly, also try to check those usb ports with other known good usb devices.

A side note: your previous post was avoidable, you could have just edited the post you had done five minutes before.

felixwatts · 2016-08-17 18:31:28

Hi, sorry for the delay in getting back!

I was unable to test with windows as I dont have a windows installation. Instead I sent the disk back and bought another one. This time is a 5TB seagate disk and I'm getting fairly similar behaviour:

lsusb -vvv with disk connected:

lsusb -vvv

Bus 002 Device 004: ID 0bc2:331a Seagate RSS LLC 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x0bc2 Seagate RSS LLC
  idProduct          0x331a 
  bcdDevice            9.11
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          121
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           4
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
        Command pipe (0x01)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
        MaxStreams             32
        Status pipe (0x02)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             32
        Data-in pipe (0x03)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               7
        MaxStreams             32
        Data-out pipe (0x04)

Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x045b Hitachi, Ltd
  idProduct          0x0210 
  bcdDevice            1.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes           19
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Feedback
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               8
        bMaxBurst               0

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.07
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 001 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc016 Optical Wheel Mouse
  bcdDevice            3.40
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              10

Bus 001 Device 002: ID 045b:0209 Hitachi, Ltd 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x045b Hitachi, Ltd
  idProduct          0x0209 
  bcdDevice            1.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.07
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

dmesg when connecting the device (yes those disonnect messages and the stuff related to the mouse all happen when I CONNECT the hard drive)

dmesg

[ 1066.114916] usb 1-1.3: USB disconnect, device number 5
[ 1066.342013] usb 1-1.3: new low-speed USB device number 6 using xhci_hcd
[ 1066.443080] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C016.0004/input/input14
[ 1066.443447] hid-generic 0003:046D:C016.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.3/input0
[ 1068.612366] usb 2-1.4: new SuperSpeed USB device number 7 using xhci_hcd

fdisk -l when the disk is connected:

Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0002043c

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1  *         2048   1050623   1048576  512M  b W95 FAT32
/dev/sda2         1050624  34605055  33554432   16G 83 Linux
/dev/sda3        34605056 147912703 113307648   54G 83 Linux
/dev/sda4       147912704 156301311   8388608    4G 82 Linux swap / Solaris

Any ideas?

Thanks for any help!
Felix

Arch Linux

#1 2016-07-23 08:44:32

External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#2 2016-07-23 19:03:04

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#3 2016-07-23 19:11:14

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#4 2016-07-23 20:23:39

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#5 2016-07-23 20:32:15

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#6 2016-07-23 23:26:36

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#7 2016-07-24 06:44:42

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#8 2016-07-24 06:51:08

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#9 2016-07-24 06:56:36

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#10 2016-07-24 14:03:40

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

#11 2016-08-17 18:31:28

Re: External Hard Drive Not Recognised (Touro Desk Pro 4TB USB3)

Board footer