You are not logged in.
Pages: 1
Topic closed
Hi all.
In my USB headset audio is very crackling.
I found that a few days ago.
dmesg have these lines:
[ 5377.483657] usb 3-1: 2:1: cannot set freq 48000 to ep 0x1
[ 5377.487656] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5377.488006] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5485.493721] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5759.186541] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5759.186638] usb 3-1: 2:1: cannot set freq 48000 to ep 0x1
[ 5759.194431] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5759.194789] usb 3-1: 2:1: cannot get freq at ep 0x1
[ 5924.664599] usb 3-1: 2:1: cannot get freq at ep 0x1
[10195.112290] usb 3-1: 1:1: cannot get freq at ep 0x81
[10195.112599] usb 3-1: 1:1: cannot get freq at ep 0x81
[10521.619967] usb 3-1: 2:1: cannot get freq at ep 0x1Output of usb-devices with my headset:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=046d ProdID=0a37 Rev=01.16
S: Manufacturer=Logitech Inc
S: Product=Logitech USB Headset H540
S: SerialNumber=00000000
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhidHow can I solve this?
Last edited by Xinevic (2016-08-01 14:24:27)
Offline
I had a similar problem with an external USB sound card (DAC). For some reason, it did not work on USB3, but on a USB2 port it worked fine.
What I hear, I forget. What I say, I remember. What I do, I understand. –Tao Te Ching/Laozi
Offline
Please do not necrobump old threads. I highly doubt Xinevic is still having this problem.
Offline
Offline
Pages: 1
Topic closed