You are not logged in.
Pages: 1
Hi all,
I have a Thinkpad (E460) with i7 6500u + amd r7 m360 + 8GB RAM + 1TB HDD where i have installed arch linux alongside windows 10 pro.
Almost everything works file except for suspend to ram ( not tested suspend to disk ). Although the system goes to sleep when I close the lid, and gets back when I open the Lid, but somehow it doesn't conserve the battery like the way it should. It seems that nothing is suspending under the hood except the screen. It uses ~60% of the battery after ~8 hrs of sleep.
I have tried with pm-utils and tlp but nothing helped me.
Please tell me if any logs are needed for this.
Thanks.
Offline
Yes, please post your dmesg logs. Output of
uname -aFor the dmesg log, please do after closing and opening your laptop lid.
Offline
Output of "uname -a"
Linux deathholes-tp 4.7.2-1-ARCH #1 SMP PREEMPT Sat Aug 20 23:02:56 CEST 2016 x86_64 GNU/Linux Output of "dmesg". done after "dmesg -c" and then closed the lid and opened iut again after 5-6 seconds.
[57283.697795] wlp1s0: deauthenticating from 90:8d:78:c2:cc:07 by local choice (Reason: 3=DEAUTH_LEAVING)
[57283.711738] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57284.876193] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[57285.137474] [drm] ring test on 0 succeeded in 16 usecs
[57285.137711] [drm] ring test on 1 succeeded in 20 usecs
[57285.137746] [drm] ring test on 2 succeeded in 15 usecs
[57285.137757] [drm] ring test on 3 succeeded in 4 usecs
[57285.137763] [drm] ring test on 4 succeeded in 2 usecs
[57285.137770] [drm] ring test on 5 succeeded in 2 usecs
[57285.137776] [drm] ring test on 6 succeeded in 2 usecs
[57285.137783] [drm] ring test on 7 succeeded in 2 usecs
[57285.137789] [drm] ring test on 8 succeeded in 2 usecs
[57285.137835] [drm] ring test on 9 succeeded in 6 usecs
[57285.137841] [drm] ring test on 10 succeeded in 5 usecs
[57285.154489] PM: Syncing filesystems ... done.
[57285.878900] PM: Preparing system for sleep (mem)
[57285.879759] Freezing user space processes ... (elapsed 0.003 seconds) done.
[57285.883011] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[57285.883224] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[57285.884700] PM: Suspending system (mem)
[57285.884735] Suspending console(s) (use no_console_suspend to debug)
[57285.885297] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57285.909137] e1000e: EEE TX LPI TIMER: 00000011
[57286.106514] sd 0:0:0:0: [sda] Stopping disk
[57286.673466] PM: suspend of devices complete after 788.527 msecs
[57286.685267] PM: late suspend of devices complete after 11.793 msecs
[57286.718511] e1000e 0000:00:1f.6: System wakeup enabled by ACPI
[57286.718558] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[57286.745248] PM: noirq suspend of devices complete after 59.978 msecs
[57286.746284] ACPI: Preparing to enter system sleep state S3
[57286.865255] ACPI : EC: EC stopped
[57286.865257] PM: Saving platform NVS memory
[57286.865261] Disabling non-boot CPUs ...
[57286.886680] smpboot: CPU 1 is now offline
[57286.907696] smpboot: CPU 2 is now offline
[57286.919852] smpboot: CPU 3 is now offline
[57286.923395] ACPI: Low-level resume complete
[57286.923490] ACPI : EC: EC started
[57286.923491] PM: Restoring platform NVS memory
[57286.924283] Enabling non-boot CPUs ...
[57286.924313] x86: Booting SMP configuration:
[57286.924314] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57286.952445] cache: parent cpu1 should not be sleeping
[57286.952576] CPU1 is up
[57286.952589] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57286.979082] cache: parent cpu2 should not be sleeping
[57286.979447] CPU2 is up
[57286.979479] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57287.009070] cache: parent cpu3 should not be sleeping
[57287.009446] CPU3 is up
[57287.019682] ACPI: Waking up from system sleep state S3
[57287.322376] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[57287.322465] PM: noirq resume of devices complete after 26.820 msecs
[57287.338181] PM: early resume of devices complete after 15.646 msecs
[57287.338685] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[57287.339384] sd 0:0:0:0: [sda] Starting disk
[57287.342272] rtc_cmos 00:02: System wakeup disabled by ACPI
[57287.346349] e1000e 0000:00:1f.6: System wakeup disabled by ACPI
[57287.349237] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[57287.385553] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[57287.610016] [drm] ring test on 0 succeeded in 15 usecs
[57287.610244] [drm] ring test on 1 succeeded in 20 usecs
[57287.610278] [drm] ring test on 2 succeeded in 15 usecs
[57287.610291] [drm] ring test on 3 succeeded in 5 usecs
[57287.610297] [drm] ring test on 4 succeeded in 2 usecs
[57287.610303] [drm] ring test on 5 succeeded in 2 usecs
[57287.610311] [drm] ring test on 6 succeeded in 3 usecs
[57287.610317] [drm] ring test on 7 succeeded in 2 usecs
[57287.610325] [drm] ring test on 8 succeeded in 3 usecs
[57287.610370] [drm] ring test on 9 succeeded in 6 usecs
[57287.610376] [drm] ring test on 10 succeeded in 5 usecs
[57287.610502] [drm] ib test on ring 0 succeeded in 0 usecs
[57287.610685] [drm] ib test on ring 1 succeeded in 0 usecs
[57287.610769] [drm] ib test on ring 2 succeeded in 0 usecs
[57287.610845] [drm] ib test on ring 3 succeeded in 0 usecs
[57287.610920] [drm] ib test on ring 4 succeeded in 0 usecs
[57287.610952] [drm] ib test on ring 5 succeeded in 0 usecs
[57287.610983] [drm] ib test on ring 6 succeeded in 0 usecs
[57287.611025] [drm] ib test on ring 7 succeeded in 0 usecs
[57287.611058] [drm] ib test on ring 8 succeeded in 0 usecs
[57287.611086] [drm] ib test on ring 9 succeeded in 0 usecs
[57287.611113] [drm] ib test on ring 10 succeeded in 0 usecs
[57287.659748] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
[57287.992946] usb 1-6: reset full-speed USB device number 7 using xhci_hcd
[57288.326314] usb 1-7: reset high-speed USB device number 3 using xhci_hcd
[57288.536815] PM: resume of devices complete after 1198.691 msecs
[57288.537003] usb 1-6:1.0: rebind failed: -517
[57288.537008] usb 1-6:1.1: rebind failed: -517
[57288.537519] PM: Finishing wakeup.
[57288.537524] Restarting tasks ... done.
[57288.558059] Bluetooth: hci0: read Intel version: 370810011003110e00
[57288.558136] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[57288.722345] e1000e: enp0s31f6 NIC Link is Down
[57288.723973] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[57288.809050] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[57288.925881] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[57288.929238] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57288.933075] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57288.933293] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57288.998635] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57288.998892] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57289.013644] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57289.022238] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57289.022440] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57289.078990] [drm] RC6 on
[57289.087838] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57289.088040] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[57289.102222] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57289.178585] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57289.408812] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57289.541190] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[57289.541200] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[57289.542835] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[57289.542844] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[57289.543498] ata1.00: configured for UDMA/133
[57292.945750] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[57293.320156] wlp1s0: authenticate with 90:8d:78:c2:cc:07
[57293.321866] wlp1s0: send auth to 90:8d:78:c2:cc:07 (try 1/3)
[57293.323629] wlp1s0: authenticated
[57293.325253] wlp1s0: associate with 90:8d:78:c2:cc:07 (try 1/3)
[57293.329849] wlp1s0: RX AssocResp from 90:8d:78:c2:cc:07 (capab=0x411 status=0 aid=1)
[57293.336409] wlp1s0: associated
[57293.336453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes readyOffline
Pages: 1