Arch Linux

weirddan455

Member

Registered: 2012-04-15

Posts: 209

Unable to burn DVD/CDs

Just tried with k3b burning the Fedora ISO (for my laptop), this computer uses Arch.  Here are logs from k3b.  Note that this also failed trying to burn a regular data DVD using xfburn the other day.  I dual boot Windows 10, tried there as well and it also failed.  I then tried burning an audio CD (not DVD) and it still failed.  Can anyone help me here?  I can read cds/dvds/blurays just fine (I actually have a bluray burner but it supports all 3 media types.)  It's just writing that is the problem.  Am I going to have to buy a new drive?

k3b log:

Burned media
-----------------------
DVD+R

Devices
-----------------------
HL-DT-ST BD-RE  WH12LS38 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R Sequential (SRM), BD-R Random (RRM), BD-RE] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump, Random Recording, Sequential Recording, Sequential Recording + POW] [%7]

System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.26
QT Version:  4.8.7
Kernel:      4.8.10-1-ARCH

Used versions
-----------------------
growisofs: 7.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 16.4x1352KBps.
          0/1440743424 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
:-[ WRITE@LBA=0h failed with SK=5h/ASC=21h/ACQ=04h]: Invalid argument
:-( write failed: Invalid argument

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=4gms -use-the-force-luke=tracksize:703488 -use-the-force-luke=dao:703488 -dvd-compat -speed=16 -use-the-force-luke=bufsize:32m

And got this from the kernel (from dmesg):

[  638.933833] ata5.00: exception Emask 0x50 SAct 0x0 SErr 0x4010800 action 0xe frozen
[  638.933840] ata5.00: irq_stat 0x00400040, connection status changed
[  638.933843] ata5: SError: { HostInt PHYRdyChg DevExch }
[  638.933853] ata5.00: cmd a0/01:00:00:10:f8/00:00:00:00:00/a0 tag 23 dma 63504 out
                        opcode=0x2a 2a 00 ff ff ff 6a 00 00 1b 00res 50/00:03:00:0c:00/00:00:00:00:00/a0 Emask 0x50 (ATA bus error)
[  638.933856] ata5.00: status: { DRDY }
[  638.933860] ata5: hard resetting link
[  639.673800] ata5: SATA link down (SStatus 0 SControl 300)
[  640.365138] ata5: hard resetting link
[  640.683838] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  640.686875] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[  640.686883] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0c5e88), AE_NOT_FOUND (20160422/psparse-542)
[  640.691194] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[  640.691201] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0c5e88), AE_NOT_FOUND (20160422/psparse-542)
[  640.691215] ata5.00: configured for UDMA/133
[  640.803608] ata5: EH complete

Last edited by weirddan455 (2016-11-28 03:58:11)

weirddan455

Member

Registered: 2012-04-15

Posts: 209

Re: Unable to burn DVD/CDs

Here is k3b log from trying to burn an audio CD.  The kernel log above was from the same (somehow I lost the kernel log for the DVD but the errors looked the same)

Devices
-----------------------
HL-DT-ST BD-RE  WH12LS38 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R Sequential (SRM), BD-R Random (RRM), BD-RE] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump, Random Recording, Sequential Recording, Sequential Recording + POW] [%7]

System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.26
QT Version:  4.8.7
Kernel:      4.8.10-1-ARCH

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'BD-RE  WH12LS38 '
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0040 (BD-ROM) 
Profile: 0x0041 (BD-R sequential recording) 
Profile: 0x0042 (BD-R random recording) 
Profile: 0x0043 (BD-RE) 
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2483712 = 2425 KB
Drive DMA Speed: 16976 kB/s 96x CD 12x DVD
FIFO size      : 4194304 = 4096 KB
Speed set to 7056 KB/s
pregap1: -1
Track 01: audio   39 MB (03:54.80) no preemp swab copy
Track 02: audio   65 MB (06:27.32) no preemp swab copy
Track 03: audio   44 MB (04:24.16) no preemp swab copy
Track 04: audio   39 MB (03:57.48) no preemp swab copy
Track 05: audio   38 MB (03:49.20) no preemp swab copy
Track 06: audio   43 MB (04:17.57) no preemp swab copy
Track 07: audio   46 MB (04:36.56) no preemp swab copy
Track 08: audio   54 MB (05:22.04) no preemp swab copy
Track 09: audio   43 MB (04:19.48) no preemp swab copy
Track 10: audio   49 MB (04:54.30) no preemp swab copy
Track 11: audio   49 MB (04:51.97) no preemp swab copy
Track 12: audio   46 MB (04:38.02) no preemp swab copy
Track 13: audio   33 MB (03:19.18) no preemp swab copy
Track 14: audio   41 MB (04:05.64) no preemp swab copy
Track 15: audio   48 MB (04:49.92) no preemp swab copy
Track 16: audio   42 MB (04:13.73) no preemp swab copy
Track 17: audio   42 MB (04:11.53) no preemp swab copy
Total size:      769 MB (76:12.93) = 342970 sectors
Lout start:      769 MB (76:14/70) = 342970 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 16876
Starting to write CD/DVD at speed  40.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 50 A0 03 21 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x04 (logical block address out of range) [No matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 4.560s timeout 200s
Errno: 5 (Input/output error), read buffer cap scsi sendcmd: no error
CDB:  5C 00 00 00 00 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.132s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
Starting new track at sector: 0
Track 01:    0 of   39 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.119s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.167s timeout 200s
write track data: error after 0 bytes
Writing  time:   10.190s
Average write speed 452.6x.
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.142s timeout 200s
Trouble flushing the cache
Fixating time:    7.175s
/usr/bin/wodim: fifo had 64 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=40 -sao driveropts=burnfree -useinfo -audio /tmp/kde-daniel/k3b_audio_0_01.inf /tmp/kde-daniel/k3b_audio_0_02.inf /tmp/kde-daniel/k3b_audio_0_03.inf /tmp/kde-daniel/k3b_audio_0_04.inf /tmp/kde-daniel/k3b_audio_0_05.inf /tmp/kde-daniel/k3b_audio_0_06.inf /tmp/kde-daniel/k3b_audio_0_07.inf /tmp/kde-daniel/k3b_audio_0_08.inf /tmp/kde-daniel/k3b_audio_0_09.inf /tmp/kde-daniel/k3b_audio_0_10.inf /tmp/kde-daniel/k3b_audio_0_11.inf /tmp/kde-daniel/k3b_audio_0_12.inf /tmp/kde-daniel/k3b_audio_0_13.inf /tmp/kde-daniel/k3b_audio_0_14.inf /tmp/kde-daniel/k3b_audio_0_15.inf /tmp/kde-daniel/k3b_audio_0_16.inf /tmp/kde-daniel/k3b_audio_0_17.inf

scdbackup

Member

Registered: 2013-05-30

Posts: 73

Re: Unable to burn DVD/CDs

Hi,

if "ata5" is really the burner device then it seems that the drive or
the bus disconnect and reconnect as soon as a WRITE command is sent.
The error code 5 21 04 is not in the list of SCSI error codes.
The 5 21 error family means that the write address is not acceptable.

But even if the burn program would use a wrong write address, there should
be no such effect as seen in the kernel log. So it seems that there is a
hardware problem. Either in drive or SATA bus.

If you have a free SATA port, then it might be worth a try to plug the
drive's data cable there.

Have a nice day

Thomas

Last edited by scdbackup (2016-11-28 08:36:42)