You are not logged in.

Pages: 1

#1 2016-11-30 06:55:31

reddhawk
Member
Registered: 2012-07-02
Posts: 28

[SOLVED] Unable to get my audio working properly

Guys, I tried to find a solution on forums, wiki, blogs for days but I couldn't so please help me. I don't really know what I'm doing wrong, probably I'm missing something basic.

I have two audio cards I can use. One is integrated, one is dedicated (both works, I can tell this because I were able to use them until a certain point when something (?) happened). I want to use the dedicated one.

Actually I have no audio when I boot my computer. Volume is up on all the devices, nothing is muted. I have both alsa and pulseaudio (i just reinstalled it so the conf is clean) installed.

Here are some outputs you may find interesting:

[damiano@tokyo ~]$ cat /etc/modprobe.d/alsa-base.conf 
# Creative Labs Sound Core 3D [Sound Blaster Recon3D / Z-Series]
options snd_hda_intel model=prodigy71hifi vid=1102 pid=0012 index=0

# Intel Corporation 8 Series [C220 Series Chipset High Definition Audio Controller]
options snd_hda_intel model=auto vid=8086 pid=8c20 index=1

# NVIDIA Corporation [GK104 HDMI Audio Controller]
options snd_hda_intel model=auto vid=10de pid=0e0a index=2
[damiano@tokyo ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: Creative [HDA Creative], device 0: ALC898 Analog [ALC898 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[damiano@tokyo ~]$ cat .asoundrc
pcm.!default {
        type hw
        card Creative
}

ctl.!default {
        type hw
        card Creative
}

pcm.dsp {
    type plug
    slave.pcm "dmix"
}

defaults.pcm.rate_converter "samplerate_best"

pcm.!surround51 {
    type vdownmix
    slave.pcm "default"
}
pcm.!surround40 {
    type vdownmix
    slave.pcm "default"
}
[damiano@tokyo ~]$ lsmod|grep '^snd'| column -t 
snd_hda_codec_hdmi     45056   1
snd_hda_codec_realtek  69632   2
snd_hda_codec_generic  69632   1   snd_hda_codec_realtek
snd_hda_intel          32768   8
snd_usb_audio          155648  1
snd_hda_codec          106496  4   snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_usbmidi_lib        28672   1   snd_usb_audio
snd_hda_core           65536   5   snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_rawmidi            28672   1   snd_usbmidi_lib
snd_seq_device         16384   1   snd_rawmidi
snd_hwdep              16384   2   snd_hda_codec,snd_usb_audio
snd_pcm                90112   5   snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_hda_core,snd_hda_codec_hdmi
snd_timer              28672   1   snd_pcm
snd                    69632   30  snd_hda_intel,snd_hwdep,snd_hda_codec,snd_usb_audio,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_usbmidi_lib,snd_seq_device,snd_hda_codec_realtek,snd_pcm
[damiano@tokyo ~]$ ls -l /dev/snd/
totale 0
drwxr-xr-x  2 root root       60 30 nov 07.03 by-id
drwxr-xr-x  2 root root      120 30 nov 07.03 by-path
crw-rw----+ 1 root audio 116, 13 30 nov 07.03 controlC0
crw-rw----+ 1 root audio 116, 15 30 nov 07.03 controlC1
crw-rw----+ 1 root audio 116,  3 30 nov 07.03 controlC2
crw-rw----+ 1 root audio 116,  2 30 nov 07.03 controlC3
crw-rw----+ 1 root audio 116, 20 30 nov 07.03 hwC1D0
crw-rw----+ 1 root audio 116,  8 30 nov 07.03 hwC2D0
crw-rw----+ 1 root audio 116, 12 30 nov 07.03 hwC3D1
crw-rw----+ 1 root audio 116, 14 30 nov 07.03 pcmC0D0c
crw-rw----+ 1 root audio 116, 16 30 nov 07.03 pcmC1D3p
crw-rw----+ 1 root audio 116, 17 30 nov 07.03 pcmC1D7p
crw-rw----+ 1 root audio 116, 18 30 nov 07.03 pcmC1D8p
crw-rw----+ 1 root audio 116, 19 30 nov 07.03 pcmC1D9p
crw-rw----+ 1 root audio 116,  5 30 nov 07.03 pcmC2D0c
crw-rw----+ 1 root audio 116,  4 30 nov 07.36 pcmC2D0p
crw-rw----+ 1 root audio 116,  6 30 nov 07.03 pcmC2D1p
crw-rw----+ 1 root audio 116,  7 30 nov 07.03 pcmC2D2c
crw-rw----+ 1 root audio 116, 10 30 nov 07.03 pcmC3D0c
crw-rw----+ 1 root audio 116,  9 30 nov 07.03 pcmC3D0p
crw-rw----+ 1 root audio 116, 11 30 nov 07.03 pcmC3D2c
crw-rw----+ 1 root audio 116,  1 30 nov 07.03 seq
crw-rw----+ 1 root audio 116, 33 30 nov 07.03 timer
[damiano@tokyo ~]$ pactl list sinks
Sink #0
	Stato: SUSPENDED
	Nome: alsa_output.pci-0000_01_00.1.hdmi-stereo
	Descrizione: GK104 HDMI Audio Controller Digital Stereo (HDMI)
	Driver: module-alsa-card.c
	Specifica di campionamento: s16le ch 2 44100 Hz
	Mappa dei canali: front-left,front-right
	Modulo di appartenenza: 6
	Muto: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        bilanciamento 0,00
	Volume base: 65536 / 100% / 0,00 dB
	Monitor della sorgente: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
	Latenza: 0 usec, configurata 0 usec
	Flag: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Proprietà:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xf3080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0e0a"
		device.product.name = "GK104 HDMI Audio Controller"
		device.string = "hdmi:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
		alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
		alsa.components = "HDA:10de0040,10438465,00100100"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Porte:
		hdmi-output-0: HDMI / DisplayPort (priority: 5900, not available)
	Porta attiva: hdmi-output-0
	Formati:
		pcm

Sink #1
	Stato: SUSPENDED
	Nome: alsa_output.pci-0000_02_00.0.analog-stereo
	Descrizione: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico
	Driver: module-alsa-card.c
	Specifica di campionamento: s16le ch 2 44100 Hz
	Mappa dei canali: front-left,front-right
	Modulo di appartenenza: 7
	Muto: sì
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        bilanciamento 0,00
	Volume base: 65536 / 100% / 0,00 dB
	Monitor della sorgente: alsa_output.pci-0000_02_00.0.analog-stereo.monitor
	Latenza: 0 usec, configurata 0 usec
	Flag: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Proprietà:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC898 Analog"
		alsa.id = "ALC898 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf3404000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card3"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "front:3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stereo analogico"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico"
		alsa.mixer_name = "Realtek ALC898"
		alsa.components = "HDA:10ec0899,11020041,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Porte:
		analog-output-lineout: Line-Out (priority: 9900, available)
		analog-output-headphones: Cuffie analogiche (priority: 9000, not available)
	Porta attiva: analog-output-lineout
	Formati:
		pcm

Sink #2
	Stato: SUSPENDED
	Nome: alsa_output.pci-0000_00_1b.0.analog-stereo
	Descrizione: Audio interno Stereo analogico
	Driver: module-alsa-card.c
	Specifica di campionamento: s16le ch 2 44100 Hz
	Mappa dei canali: front-left,front-right
	Modulo di appartenenza: 9
	Muto: sì
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        bilanciamento 0,00
	Volume base: 65536 / 100% / 0,00 dB
	Monitor della sorgente: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latenza: 0 usec, configurata 0 usec
	Flag: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Proprietà:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1150 Analog"
		alsa.id = "ALC1150 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3530000 irq 32"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "8c20"
		device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:2"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stereo analogico"
		device.description = "Audio interno Stereo analogico"
		alsa.mixer_name = "Realtek ALC1150"
		alsa.components = "HDA:10ec0900,18491151,00100001"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Porte:
		analog-output-lineout: Line-Out (priority: 9900, available)
		analog-output-headphones: Cuffie analogiche (priority: 9000, not available)
	Porta attiva: analog-output-lineout
	Formati:
		pcm

Let me know, and thanks in advance for any help!

Last edited by reddhawk (2016-11-30 14:11:27)

Offline

#2 2016-11-30 07:09:27

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [SOLVED] Unable to get my audio working properly

Please edit your post and choose a title that actually reflects your issue: https://wiki.archlinux.org/index.php/Co … ow_to_post

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2016-11-30 10:51:58

HiImTye
Member
From: Halifax, NS, Canada
Registered: 2012-05-09
Posts: 1,072

Re: [SOLVED] Unable to get my audio working properly

have you tried using pavucontrol to set your output device?

Offline

#4 2016-11-30 11:51:20

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,728

Re: [SOLVED] Unable to get my audio working properly

A lot of random stuff going on here, why do you load your card with a model specification? snd_hda_intel doesn't support vid and pid I don't know why this myth is so wide spread, it won't do anything. Also there's no point in specifiyng the same module multiple times, it will be loaded just once, and only the last line will be remotely considered. If you use pulseaudio, there's no point in such a convoluted .asoundrc pulse will take care of everything you defined there, mostly automatically. Unless you really want that virtual surround, but there's a pulse module for that.

Therefore, remove/backup both, your .asoundrc and your /etc/modprobe.d/base-alsa.conf install pulseaudio-alsa reboot and then post, while playing something you want to hear: 

dmesg | grep -E 'snd|ALSA|hda'
sudo fuser -v /dev/snd/*
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

Edit: Despite this being a incredibly convoluted configuration, the actual issue currently is: 

Muto: sì

on both, your Recon 3d and integrated card. It is muted, use pavucontrol or any other pulsemixer to unmute it. But while we are already here, why not clean up your configuration.

Last edited by V1del (2016-12-01 11:51:48)

Offline

#5 2016-11-30 14:10:29

reddhawk
Member
Registered: 2012-07-02
Posts: 28

Re: [SOLVED] Unable to get my audio working properly

jasonwryan wrote:

Please edit your post and choose a title that actually reflects your issue: https://wiki.archlinux.org/index.php/Co … ow_to_post

done

HiImTye wrote:

have you tried using pavucontrol to set your output device?

I set it using pactl. It was working fine with my integrated card, but not with my dedicated one.

V1del wrote:

and then post, while playing something you want to hear: 

dmesg | grep -E 'snd|ALSA|hda'
sudo fuser -v /dev/snd/*
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

How did you know I was gonna end up posting the output while listening something I want to hear? I can mark this as SOLVED.

Well thanks A LOT! I guess I was just messing around with those alsa configuration files.

If you still want that code:

[damiano@tokyo ~]$ dmesg | grep -E 'snd|ALSA|hda'
[    9.053450] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    9.053634] snd_hda_intel 0000:01:00.1: Disabling MSI
[    9.053639] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    9.053681] snd_hda_intel 0000:02:00.0: enabling device (0000 -> 0002)
[    9.053711] snd_hda_intel 0000:02:00.0: Disabling MSI
[    9.053712] snd_hda_intel 0000:02:00.0: Force to non-snoop mode
[    9.063992] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
[    9.064461] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    9.064462] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.064463] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.064463] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    9.064464] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    9.064464] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    9.064465] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    9.064466] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    9.064467] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    9.065767] snd_hda_codec_realtek hdaudioC3D1: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    9.065768] snd_hda_codec_realtek hdaudioC3D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.065769] snd_hda_codec_realtek hdaudioC3D1:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.065770] snd_hda_codec_realtek hdaudioC3D1:    mono: mono_out=0x0
[    9.065770] snd_hda_codec_realtek hdaudioC3D1:    inputs:
[    9.065771] snd_hda_codec_realtek hdaudioC3D1:      Front Mic=0x19
[    9.065772] snd_hda_codec_realtek hdaudioC3D1:      Rear Mic=0x18
[    9.065772] snd_hda_codec_realtek hdaudioC3D1:      Line=0x1a
[    9.076415] usbcore: registered new interface driver snd-usb-audio
[damiano@tokyo ~]$ sudo fuser -v /dev/snd/*
                     UTENTE      PID ACCESSO COMANDO
/dev/snd/controlC0:  damiano     561 F.... pulseaudio
/dev/snd/controlC1:  damiano     561 F.... pulseaudio
/dev/snd/controlC2:  damiano     561 F.... pulseaudio
/dev/snd/controlC3:  damiano     561 F.... pulseaudio
/dev/snd/pcmC3D0p:   damiano     561 F...m pulseaudio
[damiano@tokyo ~]$ pacmd list-cards
4 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "2"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xf3080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0e0a"
		device.product.name = "GK104 HDMI Audio Controller"
		device.string = "2"
		device.description = "GK104 HDMI Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Uscita «Digital Stereo (HDMI)» (priority 5400, available: unknown)
		output:hdmi-surround: Uscita «Digital Surround 5.1 (HDMI)» (priority 300, available: unknown)
		output:hdmi-surround71: Uscita «Digital Surround 7.1 (HDMI)» (priority 300, available: unknown)
		output:hdmi-stereo-extra1: Uscita «Digital Stereo (HDMI 2)» (priority 5200, available: unknown)
		output:hdmi-surround-extra1: Uscita «Digital Surround 5.1 (HDMI 2)» (priority 100, available: unknown)
		output:hdmi-surround71-extra1: Uscita «Digital Surround 7.1 (HDMI 2)» (priority 100, available: unknown)
		output:hdmi-stereo-extra2: Uscita «Digital Stereo (HDMI 3)» (priority 5200, available: unknown)
		output:hdmi-surround-extra2: Uscita «Digital Surround 5.1 (HDMI 3)» (priority 100, available: unknown)
		output:hdmi-surround71-extra2: Uscita «Digital Surround 7.1 (HDMI 3)» (priority 100, available: unknown)
		output:hdmi-stereo-extra3: Uscita «Digital Stereo (HDMI 4)» (priority 5200, available: unknown)
		output:hdmi-surround-extra3: Uscita «Digital Surround 5.1 (HDMI 4)» (priority 100, available: unknown)
		output:hdmi-surround71-extra3: Uscita «Digital Surround 7.1 (HDMI 4)» (priority 100, available: unknown)
		off: Spento (priority 0, available: unknown)
	active profile: <output:hdmi-stereo>
	sinks:
		alsa_output.pci-0000_01_00.1.hdmi-stereo/#4: GK104 HDMI Audio Controller Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#7: Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_02_00.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "3"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf3404000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card3"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "3"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Ingresso «Stereo analogico» (priority 60, available: unknown)
		output:analog-stereo: Uscita «Stereo analogico» (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Duplex stereo analogico (priority 6060, available: unknown)
		output:analog-surround-21: Uscita «Surround analogico 2.1» (priority 800, available: unknown)
		output:analog-surround-21+input:analog-stereo: Uscita «Surround analogico 2.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		output:analog-surround-40: Uscita «Surround analogico 4.0» (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Uscita «Surround analogico 4.0» + Ingresso «Stereo analogico» (priority 760, available: unknown)
		output:analog-surround-41: Uscita «Surround analogico 4.1» (priority 800, available: unknown)
		output:analog-surround-41+input:analog-stereo: Uscita «Surround analogico 4.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		output:analog-surround-50: Uscita «Surround analogico 5.0» (priority 700, available: unknown)
		output:analog-surround-50+input:analog-stereo: Uscita «Surround analogico 5.0» + Ingresso «Stereo analogico» (priority 760, available: unknown)
		output:analog-surround-51: Uscita «Surround analogico 5.1» (priority 800, available: unknown)
		output:analog-surround-51+input:analog-stereo: Uscita «Surround analogico 5.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		off: Spento (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_02_00.0.analog-stereo/#1: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico
	sources:
		alsa_output.pci-0000_02_00.0.analog-stereo.monitor/#1: Monitor of Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico
		alsa_input.pci-0000_02_00.0.analog-stereo/#2: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico
	ports:
		analog-input-front-mic: Microfono anteriore (priority 8500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Microfono posteriore (priority 8200, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line-In (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line-Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Cuffie analogiche (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
    index: 2
	name: <alsa_card.usb-Microsoft_Microsoft___LifeCam_HD-3000-02>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "0"
		alsa.card_name = "Microsoft® LifeCam HD-3000"
		alsa.long_card_name = "Microsoft Microsoft® LifeCam HD-3000 at usb-0000:00:14.0-14, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:14:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/sound/card0"
		udev.id = "usb-Microsoft_Microsoft®_LifeCam_HD-3000-02"
		device.bus = "usb"
		device.vendor.id = "045e"
		device.vendor.name = "Microsoft Corp."
		device.product.id = "0779"
		device.product.name = "LifeCam HD-3000"
		device.serial = "Microsoft_Microsoft®_LifeCam_HD-3000"
		device.form_factor = "webcam"
		device.string = "0"
		device.description = "LifeCam HD-3000"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	profiles:
		input:analog-mono: Ingresso «Mono analogico» (priority 2, available: unknown)
		off: Spento (priority 0, available: unknown)
	active profile: <input:analog-mono>
	sources:
		alsa_input.usb-Microsoft_Microsoft___LifeCam_HD-3000-02.analog-mono/#3: LifeCam HD-3000 Mono analogico
	ports:
		analog-input-mic: Microfono (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
    index: 3
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 9
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3530000 irq 32"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "8c20"
		device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Audio interno"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Ingresso «Stereo analogico» (priority 60, available: unknown)
		output:analog-stereo: Uscita «Stereo analogico» (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Duplex stereo analogico (priority 6060, available: unknown)
		output:analog-surround-21: Uscita «Surround analogico 2.1» (priority 800, available: unknown)
		output:analog-surround-21+input:analog-stereo: Uscita «Surround analogico 2.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		output:analog-surround-40: Uscita «Surround analogico 4.0» (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Uscita «Surround analogico 4.0» + Ingresso «Stereo analogico» (priority 760, available: unknown)
		output:analog-surround-41: Uscita «Surround analogico 4.1» (priority 800, available: unknown)
		output:analog-surround-41+input:analog-stereo: Uscita «Surround analogico 4.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		output:analog-surround-50: Uscita «Surround analogico 5.0» (priority 700, available: unknown)
		output:analog-surround-50+input:analog-stereo: Uscita «Surround analogico 5.0» + Ingresso «Stereo analogico» (priority 760, available: unknown)
		output:analog-surround-51: Uscita «Surround analogico 5.1» (priority 800, available: unknown)
		output:analog-surround-51+input:analog-stereo: Uscita «Surround analogico 5.1» + Ingresso «Stereo analogico» (priority 860, available: unknown)
		output:iec958-stereo: Uscita «Stereo digitale (IEC958)» (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-stereo: Uscita «Stereo digitale (IEC958)» + Ingresso «Stereo analogico» (priority 5560, available: unknown)
		off: Spento (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#2: Audio interno Stereo analogico
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#4: Monitor of Audio interno Stereo analogico
		alsa_input.pci-0000_00_1b.0.analog-stereo/#5: Audio interno Stereo analogico
	ports:
		analog-input-front-mic: Microfono anteriore (priority 8500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Microfono posteriore (priority 8200, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line-In (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line-Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Cuffie analogiche (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		iec958-stereo-output: Uscita digitale (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
[damiano@tokyo ~]$ pacmd list-sinks
3 sink(s) available.
    index: 1
	name: <alsa_output.pci-0000_02_00.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9059
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 23,10 ms
	max request: 4 KiB
	max rewind: 344 KiB
	monitor source: 1
	sample spec: s16le ch 2 44100 Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 23,22 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_02_00.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC898 Analog"
		alsa.id = "ALC898 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf3404000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card3"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "front:3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stereo analogico"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stereo analogico"
		alsa.mixer_name = "Realtek ALC898"
		alsa.components = "HDA:10ec0899,11020041,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line-Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Cuffie analogiche (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>
  * index: 2
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 74465 / 114% / 3,33 dB,   front-right: 74465 / 114% / 3,33 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le ch 2 44100 Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 3 <alsa_card.pci-0000_00_1b.0>
	module: 9
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1150 Analog"
		alsa.id = "ALC1150 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3530000 irq 32"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "8c20"
		device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stereo analogico"
		device.description = "Audio interno Stereo analogico"
		alsa.mixer_name = "Realtek ALC1150"
		alsa.components = "HDA:10ec0900,18491151,00100001"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line-Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Cuffie analogiche (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>
    index: 4
	name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9050
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 7
	sample spec: s16le ch 2 44100 Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "2"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xf3080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0e0a"
		device.product.name = "GK104 HDMI Audio Controller"
		device.string = "hdmi:2"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
		alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
		alsa.components = "HDA:10de0040,10438465,00100100"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
	active port: <hdmi-output-0>
[damiano@tokyo ~]$ pacmd list-sink-inputs
1 sink input(s) available.
    index: 19
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 1 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 52,81 ms
	requested latency: 23,22 ms
	sample spec: s16le ch 2 44100 Hz
	channel map: front-left,front-right
	             Stereo
	resample method: (null)
	module: 11
	client: 3183 <Chromium>
	properties:
		application.icon_name = "chromium-browser"
		media.name = "Playback"
		application.name = "Chromium"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "651"
		application.process.user = "damiano"
		application.process.host = "tokyo"
		application.process.binary = "chromium"
		window.x11.display = ":0"
		application.language = "it_IT.UTF-8"
		application.process.machine_id = "9a1f615fa38143ab8023bd521765486f"
		application.process.session_id = "c1"
		module-stream-restore.id = "sink-input-by-application-name:Chromium"

Last edited by reddhawk (2016-11-30 14:12:33)

Offline

Pages: 1

Board footer

Powered by FluxBB