You are not logged in.

#1 2016-11-30 18:03:20

Bl4ckb0ne
Member
Registered: 2014-12-26
Posts: 70

[Nouveau] Unknown chipset NV118

Hi,

I have a laptop with a discrete card, and I want to use as a primary gpu with nouveau. I tried (and succeed) with Nvidia, but the latest driver is acting weird.

I followed the wiki page about PRIME that tells how to use the discrete gpu as a primary gpu using nouveau, but my serverX would not start.

So I booted without the file, and it works, but my graphic card is not used

Here's a partial paste of my dmesg

[    5.624776] nouveau 0000:03:00.0: DRM: Pointer to TMDS table invalid
[    5.624816] nouveau 0000:03:00.0: DRM: DCB version 4.0
[    5.624817] nouveau 0000:03:00.0: DRM: Pointer to flat panel table invalid
[    5.626656] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.627170] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    5.644579] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.775958] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.810977] nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
[    5.810989] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 1
[    5.884632] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[    5.905252] acpi_call: Cannot get handle: Error: AE_NOT_FOUND

And my Xorg.0.log with the error about the chipset

[     5.841] (--) Log file renamed from "/var/log/Xorg.pid-436.log" to "/var/log/Xorg.0.log"
[     5.847] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     5.847] X Protocol Version 11, Revision 0
[     5.847] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[     5.847] Current Operating System: Linux cthulhu 4.8.11-1-ARCH #1 SMP PREEMPT Sun Nov 27 09:26:14 CET 2016 x86_64
[     5.847] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e5b24f75-a02c-415b-b1de-70dc0f4d43d0 rw quiet acpi_osi=
[     5.847] Build Date: 19 July 2016  05:54:24PM
[     5.847]  
[     5.847] Current version of pixman: 0.34.0
[     5.847] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.847] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.847] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 30 17:46:13 2016
[     5.862] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.862] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.865] (==) No Layout section.  Using the first Screen section.
[     5.865] (==) No screen section available. Using defaults.
[     5.865] (**) |-->Screen "Default Screen Section" (0)
[     5.865] (**) |   |-->Monitor "<default monitor>"
[     5.866] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.866] (==) Automatically adding devices
[     5.866] (==) Automatically enabling devices
[     5.866] (==) Automatically adding GPU devices
[     5.866] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     5.871] 	Entry deleted from font path.
[     5.871] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     5.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     5.871] 	Entry deleted from font path.
[     5.871] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     5.871] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[     5.871] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.871] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.871] (II) Loader magic: 0x821d40
[     5.871] (II) Module ABI versions:
[     5.871] 	X.Org ANSI C Emulation: 0.4
[     5.871] 	X.Org Video Driver: 20.0
[     5.871] 	X.Org XInput driver : 22.1
[     5.871] 	X.Org Server Extension : 9.0
[     5.872] (++) using VT number 1

[     5.872] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.872] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.879] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.880] (--) PCI:*(0:0:2:0) 8086:0a16:1043:167d rev 11, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.880] (--) PCI: (0:3:0:0) 10de:1341:1043:167d rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.880] (II) Open ACPI successful (/var/run/acpid.socket)
[     5.880] (II) LoadModule: "glx"
[     5.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.895] (II) Module glx: vendor="X.Org Foundation"
[     5.895] 	compiled for 1.18.4, module version = 1.0.0
[     5.895] 	ABI class: X.Org Server Extension, version 9.0
[     5.895] (==) AIGLX enabled
[     5.895] (==) Matched intel as autoconfigured driver 0
[     5.895] (==) Matched nouveau as autoconfigured driver 1
[     5.895] (==) Matched nv as autoconfigured driver 2
[     5.895] (==) Matched intel as autoconfigured driver 3
[     5.895] (==) Matched modesetting as autoconfigured driver 4
[     5.895] (==) Matched fbdev as autoconfigured driver 5
[     5.895] (==) Matched vesa as autoconfigured driver 6
[     5.895] (==) Assigned the driver to the xf86ConfigLayout
[     5.895] (II) LoadModule: "intel"
[     5.899] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.903] (II) Module intel: vendor="X.Org Foundation"
[     5.903] 	compiled for 1.18.4, module version = 2.99.917
[     5.903] 	Module class: X.Org Video Driver
[     5.903] 	ABI class: X.Org Video Driver, version 20.0
[     5.903] (II) LoadModule: "nouveau"
[     5.903] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.905] (II) Module nouveau: vendor="X.Org Foundation"
[     5.905] 	compiled for 1.18.4, module version = 1.0.13
[     5.905] 	Module class: X.Org Video Driver
[     5.905] 	ABI class: X.Org Video Driver, version 20.0
[     5.905] (II) LoadModule: "nv"
[     5.906] (WW) Warning, couldn't open module nv
[     5.906] (II) UnloadModule: "nv"
[     5.906] (II) Unloading nv
[     5.906] (EE) Failed to load module "nv" (module does not exist, 0)
[     5.906] (II) LoadModule: "modesetting"
[     5.906] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.906] (II) Module modesetting: vendor="X.Org Foundation"
[     5.906] 	compiled for 1.18.4, module version = 1.18.4
[     5.906] 	Module class: X.Org Video Driver
[     5.906] 	ABI class: X.Org Video Driver, version 20.0
[     5.906] (II) LoadModule: "fbdev"
[     5.907] (WW) Warning, couldn't open module fbdev
[     5.907] (II) UnloadModule: "fbdev"
[     5.907] (II) Unloading fbdev
[     5.907] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.907] (II) LoadModule: "vesa"
[     5.907] (WW) Warning, couldn't open module vesa
[     5.907] (II) UnloadModule: "vesa"
[     5.907] (II) Unloading vesa
[     5.907] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.907] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.907] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     5.907] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     5.907] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     5.907] (II) NOUVEAU driver 
[     5.907] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.907] 	RIVA TNT        (NV04)
[     5.907] 	RIVA TNT2       (NV05)
[     5.907] 	GeForce 256     (NV10)
[     5.907] 	GeForce 2       (NV11, NV15)
[     5.907] 	GeForce 4MX     (NV17, NV18)
[     5.907] 	GeForce 3       (NV20)
[     5.907] 	GeForce 4Ti     (NV25, NV28)
[     5.907] 	GeForce FX      (NV3x)
[     5.907] 	GeForce 6       (NV4x)
[     5.907] 	GeForce 7       (G7x)
[     5.907] 	GeForce 8       (G8x)
[     5.907] 	GeForce GTX 200 (NVA0)
[     5.907] 	GeForce GTX 400 (NVC0)
[     5.907] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.908] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[     5.908] (II) intel(0): SNA compiled from 2.99.917-736-gbde9460
[     5.909] (II) [drm] nouveau interface version: 1.3.1
[     5.909] (EE) Unknown chipset: NV118
[     5.909] (WW) Falling back to old probe method for modesetting
[     5.910] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[     5.910] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     5.910] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.910] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.910] (==) intel(0): RGB weight 888
[     5.910] (==) intel(0): Default visual is TrueColor
[     5.910] (II) intel(0): Output eDP1 has no monitor section
[     5.930] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     5.930] (II) intel(0): Enabled output eDP1
[     5.930] (II) intel(0): Output DP1 has no monitor section
[     5.930] (II) intel(0): Enabled output DP1
[     5.930] (II) intel(0): Output HDMI1 has no monitor section
[     5.930] (II) intel(0): Enabled output HDMI1
[     5.930] (II) intel(0): Output HDMI2 has no monitor section
[     5.930] (II) intel(0): Enabled output HDMI2
[     5.930] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.930] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.930] (II) intel(0): Enabled output VIRTUAL1
[     5.930] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[     5.931] (==) intel(0): TearFree enabled
[     5.931] (==) intel(0): DPI set to (96, 96)
[     5.931] (II) Loading sub module "dri3"
[     5.931] (II) LoadModule: "dri3"
[     5.931] (II) Module "dri3" already built-in
[     5.931] (II) Loading sub module "dri2"
[     5.931] (II) LoadModule: "dri2"
[     5.931] (II) Module "dri2" already built-in
[     5.931] (II) Loading sub module "present"
[     5.931] (II) LoadModule: "present"
[     5.931] (II) Module "present" already built-in
[     5.931] (==) Depth 24 pixmap format is 32 bpp
[     5.935] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     5.935] (==) intel(0): Backing store enabled
[     5.935] (==) intel(0): Silken mouse enabled
[     5.936] (II) intel(0): HW Cursor enabled
[     5.936] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.936] (==) intel(0): DPMS enabled
[     5.936] (==) intel(0): Display hotplug detection enabled
[     5.936] (II) intel(0): [DRI2] Setup complete
[     5.936] (II) intel(0): [DRI2]   DRI driver: i965
[     5.936] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.936] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     5.937] (II) intel(0): hardware support for Present enabled
[     5.937] (--) RandR disabled
[     5.963] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.963] (II) AIGLX: enabled GLX_ARB_create_context
[     5.963] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.963] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     5.963] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.963] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     5.963] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     5.963] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     5.963] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     5.963] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.963] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     5.963] (II) AIGLX: Loaded and initialized i965
[     5.963] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.970] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     5.979] (II) intel(0): Setting screen physical size to 846 x 476
[     6.025] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.025] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.025] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.025] (II) LoadModule: "libinput"
[     6.025] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.029] (II) Module libinput: vendor="X.Org Foundation"
[     6.029] 	compiled for 1.18.4, module version = 0.22.0
[     6.029] 	Module class: X.Org XInput Driver
[     6.029] 	ABI class: X.Org XInput driver, version 22.1
[     6.029] (II) Using input driver 'libinput' for 'Power Button'
[     6.029] (**) Power Button: always reports core events
[     6.029] (**) Option "Device" "/dev/input/event2"
[     6.029] (**) Option "_source" "server/udev"
[     6.029] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     6.029] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     6.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.046] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.047] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     6.047] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     6.047] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     6.047] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.047] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.047] (II) Using input driver 'libinput' for 'Video Bus'
[     6.047] (**) Video Bus: always reports core events
[     6.047] (**) Option "Device" "/dev/input/event4"
[     6.047] (**) Option "_source" "server/udev"
[     6.047] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     6.047] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     6.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[     6.066] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.067] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     6.067] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     6.067] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     6.067] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.067] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.067] (II) Using input driver 'libinput' for 'Video Bus'
[     6.067] (**) Video Bus: always reports core events
[     6.067] (**) Option "Device" "/dev/input/event3"
[     6.067] (**) Option "_source" "server/udev"
[     6.067] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[     6.067] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[     6.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:00/input/input3/event3"
[     6.086] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.087] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[     6.087] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[     6.087] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.087] (II) No input driver specified, ignoring this device.
[     6.087] (II) This device may have been added with another device file.
[     6.087] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.087] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.087] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.087] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.087] (**) Sleep Button: always reports core events
[     6.087] (**) Option "Device" "/dev/input/event1"
[     6.087] (**) Option "_source" "server/udev"
[     6.088] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     6.088] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.116] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.117] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     6.117] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.117] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[     6.117] (II) No input driver specified, ignoring this device.
[     6.117] (II) This device may have been added with another device file.
[     6.117] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[     6.117] (II) No input driver specified, ignoring this device.
[     6.117] (II) This device may have been added with another device file.
[     6.118] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[     6.118] (II) No input driver specified, ignoring this device.
[     6.118] (II) This device may have been added with another device file.
[     6.118] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event16)
[     6.118] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[     6.118] (**) USB2.0 UVC HD Webcam: Applying InputClass "libinput keyboard catchall"
[     6.118] (II) Using input driver 'libinput' for 'USB2.0 UVC HD Webcam'
[     6.118] (**) USB2.0 UVC HD Webcam: always reports core events
[     6.118] (**) Option "Device" "/dev/input/event16"
[     6.118] (**) Option "_source" "server/udev"
[     6.118] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event16 is tagged by udev as: Keyboard
[     6.118] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event16 is a keyboard
[     6.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23/event16"
[     6.166] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[     6.167] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event16 is tagged by udev as: Keyboard
[     6.167] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event16 is a keyboard
[     6.167] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event15)
[     6.167] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[     6.167] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "libinput touchscreen catchall"
[     6.167] (II) Using input driver 'libinput' for 'Atmel Atmel maXTouch Digitizer'
[     6.167] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[     6.167] (**) Option "Device" "/dev/input/event15"
[     6.167] (**) Option "_source" "server/udev"
[     6.223] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event15 is tagged by udev as: Touchscreen
[     6.223] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event15 is a touch device
[     6.270] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A32.0001/input/input22/event15"
[     6.270] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 11)
[     6.270] (**) Option "AccelerationScheme" "none"
[     6.270] (**) Atmel Atmel maXTouch Digitizer: (accel) selected scheme none/0
[     6.270] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[     6.270] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[     6.327] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event15 is tagged by udev as: Touchscreen
[     6.327] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event15 is a touch device
[     6.328] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse1)
[     6.328] (II) No input driver specified, ignoring this device.
[     6.328] (II) This device may have been added with another device file.
[     6.329] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     6.329] (II) No input driver specified, ignoring this device.
[     6.329] (II) This device may have been added with another device file.
[     6.329] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     6.329] (II) No input driver specified, ignoring this device.
[     6.329] (II) This device may have been added with another device file.
[     6.330] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[     6.330] (II) No input driver specified, ignoring this device.
[     6.330] (II) This device may have been added with another device file.
[     6.331] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event13)
[     6.331] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     6.331] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.331] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     6.331] (**) Asus WMI hotkeys: always reports core events
[     6.331] (**) Option "Device" "/dev/input/event13"
[     6.331] (**) Option "_source" "server/udev"
[     6.331] (II) input device 'Asus WMI hotkeys', /dev/input/event13 is tagged by udev as: Keyboard
[     6.331] (II) input device 'Asus WMI hotkeys', /dev/input/event13 is a keyboard
[     6.353] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input20/event13"
[     6.353] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[     6.354] (II) input device 'Asus WMI hotkeys', /dev/input/event13 is tagged by udev as: Keyboard
[     6.354] (II) input device 'Asus WMI hotkeys', /dev/input/event13 is a keyboard
[     6.355] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[     6.355] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.355] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.355] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.355] (**) AT Translated Set 2 keyboard: always reports core events
[     6.355] (**) Option "Device" "/dev/input/event5"
[     6.355] (**) Option "_source" "server/udev"
[     6.355] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[     6.355] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[     6.373] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[     6.373] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[     6.374] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[     6.374] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[     6.375] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/event14)
[     6.375] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "evdev touchpad catchall"
[     6.375] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"
[     6.375] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "MyTouchpad"
[     6.375] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[     6.375] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[     6.375] (**) Option "Device" "/dev/input/event14"
[     6.375] (**) Option "_source" "server/udev"
[     6.375] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event14 is tagged by udev as: Touchpad
[     6.375] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[     6.375] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event14 is a touchpad
[     6.413] (**) Option "Tapping" "on"
[     6.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input21/event14"
[     6.413] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech FocalTech Touchpad" (type: TOUCHPAD, id 14)
[     6.414] (**) Option "AccelerationScheme" "none"
[     6.414] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) selected scheme none/0
[     6.414] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration factor: 2.000
[     6.414] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration threshold: 4
[     6.414] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event14 is tagged by udev as: Touchpad
[     6.414] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[     6.414] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event14 is a touchpad
[     6.414] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/mouse0)
[     6.415] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "MyTouchpad"
[     6.415] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[     6.415] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[     6.415] (**) Option "Device" "/dev/input/mouse0"
[     6.415] (**) Option "_source" "server/udev"
[     6.453] (II) failed to create input device '/dev/input/mouse0'.
[     6.453] (EE) libinput: FocalTechPS/2 FocalTech FocalTech Touchpad: Failed to create a device for /dev/input/mouse0
[     6.453] (EE) PreInit returned 2 for "FocalTechPS/2 FocalTech FocalTech Touchpad"
[     6.453] (II) UnloadModule: "libinput"
[     6.454] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     6.454] (II) No input driver specified, ignoring this device.
[     6.454] (II) This device may have been added with another device file.
[     7.932] (II) intel(0): EDID vendor "SDC", prod id 13898
[     7.932] (II) intel(0): Printing DDC gathered Modelines:
[     7.932] (II) intel(0): Modeline "3200x1800"x0.0  361.31  3200 3248 3280 3316  1800 1802 1807 1816 -hsync -vsync (109.0 kHz eP)
[     7.932] (II) intel(0): Modeline "3200x1800"x0.0  361.31  3200 3248 3280 3680  1800 1802 1807 2045 -hsync -vsync (98.2 kHz e)
[     9.598] (II) intel(0): resizing framebuffer to 1920x1080
[     9.601] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

And the proof that nouveau is in use

$ lspci -k
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Device 167d
        Kernel driver in use: i915
        Kernel modules: i915
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)
        Subsystem: ASUSTeK Computer Inc. Device 167d
        Kernel driver in use: nouveau
        Kernel modules: nouveau

My GPU is a GT840M, so is it normal that nouveau cannot identify my chipset?

Thanks

Offline

#2 2016-12-01 07:37:13

seth
Member
Registered: 2012-09-03
Posts: 49,992

Offline

Board footer

Powered by FluxBB