You are not logged in.

#1 2016-12-03 05:52:22

ozooha
Member
Registered: 2009-09-29
Posts: 173

[SOLVED] IR receiver not working anymore

I have the same issue as BODYPRINT in this SOLVED thread.
https://bbs.archlinux.org/viewtopic.php?id=145777

He mentioned that he solved his problem by reenable ing the rc-6 protocol.
What was the command he used to reenable that?

I can only enable the lircd.service how do I get to reenable rc-6 protocol?
Can anyone help out please.
Thank you for your time.
OZooHA


SOLVED:
Solution was in this thread
https://bbs.archlinux.org/viewtopic.php?id=214635
Thanks to rlees85 and graysky.

graysky further has on his link below under section setup the following (this was the solution that worked for me):

With the release of lirc v0.9.4a (June of 2016), users need to edit upstream's provided /etc/lirc/lirc_options.conf with these changes:
driver          = default
device          = /dev/lirc0

https://github.com/graysky2/streamzap/b … /README.md

Last edited by ozooha (2016-12-03 14:08:54)

Offline

Board footer

Powered by FluxBB