You are not logged in.

Pages: 1

#1 2016-12-11 02:55:30

barmadrid
Member
Registered: 2016-07-26
Posts: 22

Plasma 5 and SDDM black screen!

Hi,

With a fresh installation of Plasma 5 on PC with Skylake 530 graphics, I can't login to desktop. Starting sddm cause black screen. Gnome and GDM works fine, as well as Mate with LightDM. Only Plasma with SDDM is the issue. Tried both Intel and modset drivers, same results.

Same setup as above works on a Haswell based Graphics PC!

Kernel: Tried both the regular and LTS, same results.

Xorg.0 log:

[    39.931] (--) Log file renamed from "/var/log/Xorg.pid-432.log" to "/var/log/Xorg.0.log"
[    39.933] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    39.933] X Protocol Version 11, Revision 0
[    39.933] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[    39.933] Current Operating System: Linux nimrud 4.8.12-3-ARCH #1 SMP PREEMPT Thu Dec 8 16:10:23 CET 2016 x86_64
[    39.933] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f66321cf-5f6d-4cea-bf0e-6c615b67be2d rw quiet
[    39.933] Build Date: 19 July 2016  05:54:24PM
[    39.933]  
[    39.933] Current version of pixman: 0.34.0
[    39.933] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    39.933] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    39.933] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 10 19:56:17 2016
[    39.934] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    39.934] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    39.934] (==) No Layout section.  Using the first Screen section.
[    39.934] (==) No screen section available. Using defaults.
[    39.934] (**) |-->Screen "Default Screen Section" (0)
[    39.934] (**) |   |-->Monitor "<default monitor>"
[    39.935] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    39.935] (**) |   |-->Device "Intel Graphics"
[    39.935] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    39.935] (==) Automatically adding devices
[    39.935] (==) Automatically enabling devices
[    39.935] (==) Automatically adding GPU devices
[    39.935] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    39.938] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    39.938] 	Entry deleted from font path.
[    39.939] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    39.939] 	Entry deleted from font path.
[    39.939] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    39.939] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    39.939] 	Entry deleted from font path.
[    39.939] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    39.939] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    39.939] (==) ModulePath set to "/usr/lib/xorg/modules"
[    39.939] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    39.939] (II) Loader magic: 0x821d40
[    39.939] (II) Module ABI versions:
[    39.939] 	X.Org ANSI C Emulation: 0.4
[    39.939] 	X.Org Video Driver: 20.0
[    39.939] 	X.Org XInput driver : 22.1
[    39.939] 	X.Org Server Extension : 9.0
[    39.940] (++) using VT number 1

[    39.940] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    39.942] (II) xfree86: Adding drm device (/dev/dri/card0)
[    39.958] (--) PCI:*(0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    39.958] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    39.959] (II) LoadModule: "glx"
[    39.961] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.975] (II) Module glx: vendor="X.Org Foundation"
[    39.975] 	compiled for 1.18.4, module version = 1.0.0
[    39.975] 	ABI class: X.Org Server Extension, version 9.0
[    39.975] (==) AIGLX enabled
[    39.975] (II) LoadModule: "intel"
[    39.975] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    39.978] (II) Module intel: vendor="X.Org Foundation"
[    39.978] 	compiled for 1.18.4, module version = 2.99.917
[    39.978] 	Module class: X.Org Video Driver
[    39.978] 	ABI class: X.Org Video Driver, version 20.0
[    39.978] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    39.978] (II) intel: Driver for Intel(R) HD Graphics
[    39.979] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    39.979] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    39.979] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[    39.979] (II) intel(0): SNA compiled from 2.99.917-746-g169c74f
[    39.981] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 530
[    39.981] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    39.981] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    39.981] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    39.981] (==) intel(0): RGB weight 888
[    39.981] (==) intel(0): Default visual is TrueColor
[    39.982] (II) intel(0): Output HDMI1 has no monitor section
[    39.983] (II) intel(0): Enabled output HDMI1
[    39.983] (II) intel(0): Output HDMI2 has no monitor section
[    39.983] (II) intel(0): Enabled output HDMI2
[    39.983] (II) intel(0): Output DP1 has no monitor section
[    39.983] (II) intel(0): Enabled output DP1
[    39.983] (II) intel(0): Output HDMI3 has no monitor section
[    39.983] (II) intel(0): Enabled output HDMI3
[    39.983] (II) intel(0): Output DP2 has no monitor section
[    39.983] (II) intel(0): Enabled output DP2
[    39.984] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    39.984] (II) intel(0): Output VIRTUAL1 has no monitor section
[    39.984] (II) intel(0): Enabled output VIRTUAL1
[    39.984] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[    39.984] (==) intel(0): TearFree disabled
[    39.984] (==) intel(0): DPI set to (96, 96)
[    39.984] (II) Loading sub module "dri3"
[    39.984] (II) LoadModule: "dri3"
[    39.984] (II) Module "dri3" already built-in
[    39.984] (II) Loading sub module "dri2"
[    39.984] (II) LoadModule: "dri2"
[    39.984] (II) Module "dri2" already built-in
[    39.984] (II) Loading sub module "present"
[    39.984] (II) LoadModule: "present"
[    39.984] (II) Module "present" already built-in
[    39.984] (==) Depth 24 pixmap format is 32 bpp
[    39.987] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    39.987] (==) intel(0): Backing store enabled
[    39.987] (==) intel(0): Silken mouse enabled
[    39.988] (II) intel(0): HW Cursor enabled
[    39.988] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    39.988] (==) intel(0): DPMS enabled
[    39.989] (==) intel(0): Display hotplug detection enabled
[    39.989] (II) intel(0): [DRI2] Setup complete
[    39.989] (II) intel(0): [DRI2]   DRI driver: i965
[    39.989] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    39.989] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    39.989] (II) intel(0): hardware support for Present enabled
[    39.989] (--) RandR disabled
[    40.031] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    40.031] (II) AIGLX: enabled GLX_ARB_create_context
[    40.031] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    40.031] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    40.031] (II) AIGLX: enabled GLX_INTEL_swap_event
[    40.031] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    40.031] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    40.031] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    40.031] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    40.031] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    40.031] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    40.031] (II) AIGLX: Loaded and initialized i965
[    40.031] (II) GLX: Initialized DRI2 GL provider for screen 0
[    40.038] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[    40.040] (II) intel(0): Setting screen physical size to 508 x 285
[    40.090] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    40.090] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.090] (II) LoadModule: "libinput"
[    40.090] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    40.093] (II) Module libinput: vendor="X.Org Foundation"
[    40.093] 	compiled for 1.18.4, module version = 0.22.0
[    40.093] 	Module class: X.Org XInput Driver
[    40.093] 	ABI class: X.Org XInput driver, version 22.1
[    40.093] (II) Using input driver 'libinput' for 'Power Button'
[    40.093] (**) Power Button: always reports core events
[    40.093] (**) Option "Device" "/dev/input/event5"
[    40.093] (**) Option "_source" "server/udev"
[    40.093] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    40.093] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    40.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[    40.113] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.113] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    40.113] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    40.113] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    40.113] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    40.113] (II) Using input driver 'libinput' for 'Video Bus'
[    40.113] (**) Video Bus: always reports core events
[    40.113] (**) Option "Device" "/dev/input/event8"
[    40.113] (**) Option "_source" "server/udev"
[    40.114] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    40.114] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    40.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8"
[    40.133] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    40.133] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    40.133] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    40.134] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    40.134] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.134] (II) Using input driver 'libinput' for 'Power Button'
[    40.134] (**) Power Button: always reports core events
[    40.134] (**) Option "Device" "/dev/input/event4"
[    40.134] (**) Option "_source" "server/udev"
[    40.134] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    40.134] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    40.153] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[    40.153] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    40.154] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    40.154] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    40.154] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    40.155] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    40.155] (II) Using input driver 'libinput' for 'Sleep Button'
[    40.155] (**) Sleep Button: always reports core events
[    40.155] (**) Option "Device" "/dev/input/event3"
[    40.155] (**) Option "_source" "server/udev"
[    40.155] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    40.155] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    40.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3"
[    40.173] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    40.174] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    40.174] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    40.175] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event0)
[    40.175] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[    40.175] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[    40.175] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[    40.175] (**) Option "Device" "/dev/input/event0"
[    40.176] (**) Option "_source" "server/udev"
[    40.176] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event0 is tagged by udev as: Keyboard
[    40.176] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event0 is a keyboard
[    40.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:0745.0001/input/input2/event0"
[    40.223] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[    40.224] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event0 is tagged by udev as: Keyboard
[    40.224] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event0 is a keyboard
[    40.225] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event1)
[    40.225] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[    40.225] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[    40.225] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[    40.225] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[    40.225] (**) Option "Device" "/dev/input/event1"
[    40.225] (**) Option "_source" "server/udev"
[    40.226] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[    40.226] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is a pointer caps
[    40.226] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is a keyboard
[    40.263] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[    40.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:045E:0745.0002/input/input3/event1"
[    40.263] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 11)
[    40.263] (**) Option "AccelerationScheme" "none"
[    40.263] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[    40.263] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[    40.263] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[    40.264] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[    40.264] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is a pointer caps
[    40.264] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event1 is a keyboard
[    40.265] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[    40.265] (II) No input driver specified, ignoring this device.
[    40.265] (II) This device may have been added with another device file.
[    40.266] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event2)
[    40.266] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[    40.266] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[    40.267] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[    40.267] (**) Option "Device" "/dev/input/event2"
[    40.267] (**) Option "_source" "server/udev"
[    40.267] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event2 is tagged by udev as: Keyboard Joystick
[    40.268] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event2 is a keyboard
[    40.313] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[    40.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:045E:0745.0003/input/input4/event2"
[    40.313] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 12)
[    40.313] (**) Option "AccelerationScheme" "none"
[    40.313] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[    40.313] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[    40.313] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[    40.314] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event2 is tagged by udev as: Keyboard Joystick
[    40.314] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event2 is a keyboard
[    40.315] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[    40.315] (II) No input driver specified, ignoring this device.
[    40.315] (II) This device may have been added with another device file.
[    40.316] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[    40.316] (II) No input driver specified, ignoring this device.
[    40.316] (II) This device may have been added with another device file.
[    40.316] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[    40.316] (II) No input driver specified, ignoring this device.
[    40.316] (II) This device may have been added with another device file.
[    40.317] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[    40.317] (II) No input driver specified, ignoring this device.
[    40.317] (II) This device may have been added with another device file.
[    40.317] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[    40.317] (II) No input driver specified, ignoring this device.
[    40.317] (II) This device may have been added with another device file.
[    40.318] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[    40.318] (II) No input driver specified, ignoring this device.
[    40.318] (II) This device may have been added with another device file.
[    40.318] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    40.318] (II) No input driver specified, ignoring this device.
[    40.318] (II) This device may have been added with another device file.
[    40.319] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    40.319] (II) No input driver specified, ignoring this device.
[    40.319] (II) This device may have been added with another device file.
[    40.319] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    40.319] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    40.319] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    40.319] (**) Eee PC WMI hotkeys: always reports core events
[    40.319] (**) Option "Device" "/dev/input/event7"
[    40.319] (**) Option "_source" "server/udev"
[    40.320] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    40.320] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[    40.343] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[    40.343] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    40.344] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    40.344] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[    40.345] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    40.345] (II) No input driver specified, ignoring this device.
[    40.345] (II) This device may have been added with another device file.
[    40.357] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[    40.357] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[    40.357] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[    40.357] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[    40.357] (**) Option "Device" "/dev/input/event1"
[    40.357] (**) Option "_source" "_driver/libinput"
[    40.357] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[    40.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:045E:0745.0002/input/input3/event1"
[    40.357] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 14)
[    40.358] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[    40.358] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[    40.358] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[    40.358] (**) Option "Device" "/dev/input/event2"
[    40.358] (**) Option "_source" "_driver/libinput"
[    40.358] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[    40.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:045E:0745.0003/input/input4/event2"
[    40.358] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 15)
[    42.012] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    56.960] (II) AIGLX: Suspending AIGLX clients for VT switch

TIA

Offline

#2 2016-12-11 11:56:28

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,672

Re: Plasma 5 and SDDM black screen!

Works here, post 

journalctl --unit=sddm

Offline

#3 2016-12-11 12:02:06

ugjka
Member
From: Latvia
Registered: 2014-04-01
Posts: 1,806
Website

Re: Plasma 5 and SDDM black screen!

You are not alone
https://chakralinux.org/forum/viewtopic.php?id=15174
https://chakralinux.org/forum/viewtopic.php?id=15182

https://ugjka.net
paru > yay | webcord > discord
pacman -S spotify-launcher
mount /dev/disk/by-...

Offline

#4 2016-12-11 17:29:29

GrimBandito
Member
Registered: 2016-12-04
Posts: 41

Re: Plasma 5 and SDDM black screen!

@barmadrid - hi, I too have had this problem for some months now. The solution for me is to revert to an older version of SDDM (pre 0.14) and block pacman from updating the SDDM package. Do this by changing:- 

'IgnorePkg = sddm' in /etc/pacman.conf

Older versions of a package can be found at https://archive.archlinux.org/ and can be installed using the pacman command:-

sudo pacman -U sddm-0.13.0-3-x86_64.pkg.tar.xz

I have to use the above version of sddm, anything newer will result in a black screen. For reference I am currently using the Nouveau graphics driver and get the same result with the Nvidia driver.

This solution is far from ideal and appears to be an ongoing problem with SDDM which shows no signs of being resolved. I have also reported this problem upstream at the SDDM GitHub site.

Hope this is enough to get your display manager working.

Last edited by GrimBandito (2016-12-11 17:33:50)

Offline

#5 2016-12-13 13:26:23

farc
Member
Registered: 2014-03-05
Posts: 17

Re: Plasma 5 and SDDM black screen!

GrimBandito wrote:

...
This solution is far from ideal and appears to be an ongoing problem with SDDM which shows no signs of being resolved. I have also reported this problem upstream at the SDDM GitHub site.

Link to issue?

tia

Offline

#6 2016-12-13 13:50:18

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,672

Re: Plasma 5 and SDDM black screen!

I don't have any issues neither on an nvidia nor on an intel skylake with 530 HD card, A common cause for crashes in this regard are recent enough CPUs without microcode updates applied. But without any logs or crashdumps all any one can do is speculate.

On reading OP again, I notice you are using the xf86-video-intel driver, have you tried removing that and using the xorg builtin modesetting driver instead?

Offline

#7 2016-12-13 21:59:19

barmadrid
Member
Registered: 2016-07-26
Posts: 22

Re: Plasma 5 and SDDM black screen!

V1del wrote:

I don't have any issues neither on an nvidia nor on an intel skylake with 530 HD card, A common cause for crashes in this regard are recent enough CPUs without microcode updates applied. But without any logs or crashdumps all any one can do is speculate.

On reading OP again, I notice you are using the xf86-video-intel driver, have you tried removing that and using the xorg builtin modesetting driver instead?

Yes, I also tried with modesetting driver, same issue. By the way, I already have the Intel microcodes enabled!

Offline

#8 2017-01-23 14:28:56

Domker_
Member
Registered: 2016-11-28
Posts: 2

Re: Plasma 5 and SDDM black screen!

I have the same issue.
Last working version of SDDM is 0.13.0-x
After update to new version - black screen.
[ GTX 980 Nvidia driver 375.26 ]
If I try connect via DVI - SDDM working ok. (via HDMI - NOT working)

Offline

Pages: 1

Board footer

Powered by FluxBB